printf (".\n");
}
-/*
- * Print out the content of a SCSI message.
- */
-static int sym_show_msg (u_char * msg)
-{
- u_char i;
- printf ("%x",*msg);
- if (*msg==M_EXTENDED) {
- for (i=1;i<8;i++) {
- if (i-1>msg[1]) break;
- printf ("-%x",msg[i]);
- }
- return (i+1);
- } else if ((*msg & 0xf0) == 0x20) {
- printf ("-%x",msg[1]);
- return (2);
- }
- return (1);
-}
-
static void sym_print_msg(struct sym_ccb *cp, char *label, u_char *msg)
{
sym_print_addr(cp->cmd, "%s: ", label);
- sym_show_msg(msg);
- printf(".\n");
+ spi_print_msg(msg);
+ printf("\n");
}
static void sym_print_nego_msg(struct sym_hcb *np, int target, char *label, u_char *msg)
struct sym_tcb *tp = &np->target[target];
dev_info(&tp->starget->dev, "%s: ", label);
- sym_show_msg(msg);
- printf(".\n");
+ spi_print_msg(msg);
+ printf("\n");
}
/*
* calculations more simple.
*/
#define _5M 5000000
-static u32 div_10M[] = {2*_5M, 3*_5M, 4*_5M, 6*_5M, 8*_5M, 12*_5M, 16*_5M};
+static const u32 div_10M[] = {2*_5M, 3*_5M, 4*_5M, 6*_5M, 8*_5M, 12*_5M, 16*_5M};
/*
* Get clock factor and sync divisor for a given
}
}
-
-/*
- * Print out the list of targets that have some flag disabled by user.
- */
-static void sym_print_targets_flag(struct sym_hcb *np, int mask, char *msg)
-{
- int cnt;
- int i;
-
- for (cnt = 0, i = 0 ; i < SYM_CONF_MAX_TARGET ; i++) {
- if (i == np->myaddr)
- continue;
- if (np->target[i].usrflags & mask) {
- if (!cnt++)
- printf("%s: %s disabled for targets",
- sym_name(np), msg);
- printf(" %d", i);
- }
- }
- if (cnt)
- printf(".\n");
-}
-
/*
* Save initial settings of some IO registers.
* Assumed to have been set by BIOS.
tp->usrflags |= (SYM_DISC_ENABLED | SYM_TAGS_ENABLED);
tp->usrtags = SYM_SETUP_MAX_TAG;
+ tp->usr_width = np->maxwide;
+ tp->usr_period = 9;
- sym_nvram_setup_target(np, i, nvram);
+ sym_nvram_setup_target(tp, i, nvram);
if (!tp->usrtags)
tp->usrflags &= ~SYM_TAGS_ENABLED;
sym_name(np), np->rv_scntl3, np->rv_dmode, np->rv_dcntl,
np->rv_ctest3, np->rv_ctest4, np->rv_ctest5);
}
- /*
- * Let user be aware of targets that have some disable flags set.
- */
- sym_print_targets_flag(np, SYM_SCAN_BOOT_DISABLED, "SCAN AT BOOT");
- if (sym_verbose)
- sym_print_targets_flag(np, SYM_SCAN_LUNS_DISABLED,
- "SCAN FOR LUNS");
return 0;
}
*
* Has to be called with interrupts disabled.
*/
-#ifndef CONFIG_SCSI_SYM53C8XX_IOMAPPED
-static int sym_regtest (struct sym_hcb *np)
+#ifdef CONFIG_SCSI_SYM53C8XX_MMIO
+static int sym_regtest(struct sym_hcb *np)
{
register volatile u32 data;
/*
#endif
printf ("CACHE TEST FAILED: reg dstat-sstat2 readback %x.\n",
(unsigned) data);
- return (0x10);
+ return 0x10;
}
- return (0);
+ return 0;
+}
+#else
+static inline int sym_regtest(struct sym_hcb *np)
+{
+ return 0;
}
#endif
-static int sym_snooptest (struct sym_hcb *np)
+static int sym_snooptest(struct sym_hcb *np)
{
- u32 sym_rd, sym_wr, sym_bk, host_rd, host_wr, pc, dstat;
- int i, err=0;
-#ifndef CONFIG_SCSI_SYM53C8XX_IOMAPPED
- err |= sym_regtest (np);
- if (err) return (err);
-#endif
+ u32 sym_rd, sym_wr, sym_bk, host_rd, host_wr, pc, dstat;
+ int i, err;
+
+ err = sym_regtest(np);
+ if (err)
+ return err;
restart_test:
/*
* Enable Master Parity Checking as we intend
err |= 4;
}
- return (err);
+ return err;
}
/*
goal->iu = 0;
goal->dt = 0;
goal->qas = 0;
- goal->period = 0;
goal->offset = 0;
return;
}
* Many devices implement PPR in a buggy way, so only use it if we
* really want to.
*/
- if (goal->iu || goal->dt || goal->qas || (goal->period < 0xa)) {
+ if (goal->offset &&
+ (goal->iu || goal->dt || goal->qas || (goal->period < 0xa))) {
nego = NS_PPR;
} else if (spi_width(starget) != goal->width) {
nego = NS_WIDE;
switch (nego) {
case NS_SYNC:
- msgptr[msglen++] = M_EXTENDED;
- msgptr[msglen++] = 3;
- msgptr[msglen++] = M_X_SYNC_REQ;
- msgptr[msglen++] = goal->period;
- msgptr[msglen++] = goal->offset;
+ msglen += spi_populate_sync_msg(msgptr + msglen, goal->period,
+ goal->offset);
break;
case NS_WIDE:
- msgptr[msglen++] = M_EXTENDED;
- msgptr[msglen++] = 2;
- msgptr[msglen++] = M_X_WIDE_REQ;
- msgptr[msglen++] = goal->width;
+ msglen += spi_populate_width_msg(msgptr + msglen, goal->width);
break;
case NS_PPR:
- msgptr[msglen++] = M_EXTENDED;
- msgptr[msglen++] = 6;
- msgptr[msglen++] = M_X_PPR_REQ;
- msgptr[msglen++] = goal->period;
- msgptr[msglen++] = 0;
- msgptr[msglen++] = goal->offset;
- msgptr[msglen++] = goal->width;
- msgptr[msglen++] = (goal->iu ? PPR_OPT_IU : 0) |
+ msglen += spi_populate_ppr_msg(msgptr + msglen, goal->period,
+ goal->offset, goal->width,
+ (goal->iu ? PPR_OPT_IU : 0) |
(goal->dt ? PPR_OPT_DT : 0) |
- (goal->qas ? PPR_OPT_QAS : 0);
+ (goal->qas ? PPR_OPT_QAS : 0));
break;
}
/*
* Insert a job into the start queue.
*/
-static void sym_put_start_queue(struct sym_hcb *np, struct sym_ccb *cp)
+void sym_put_start_queue(struct sym_hcb *np, struct sym_ccb *cp)
{
u_short qidx;
if (pm) {
dp_scr = scr_to_cpu(pm->ret);
- dp_ofs -= scr_to_cpu(pm->sg.size);
+ dp_ofs -= scr_to_cpu(pm->sg.size) & 0x00ffffff;
}
/*
* If result is dp_sg = SYM_CONF_MAX_SG, then we are at the
* end of the data.
*/
- tmp = scr_to_cpu(sym_goalp(cp));
+ tmp = scr_to_cpu(cp->goalp);
dp_sg = SYM_CONF_MAX_SG;
if (dp_scr != tmp)
dp_sg -= (tmp - 8 - (int)dp_scr) / (2*4);
* And our alchemy:) allows to easily calculate the data
* script address we want to return for the next data phase.
*/
- dp_ret = cpu_to_scr(sym_goalp(cp));
+ dp_ret = cpu_to_scr(cp->goalp);
dp_ret = dp_ret - 8 - (SYM_CONF_MAX_SG - dp_sg) * (2*4);
/*
* If all data has been transferred,
* there is no residual.
*/
- if (cp->phys.head.lastp == sym_goalp(cp))
+ if (cp->phys.head.lastp == cp->goalp)
return resid;
/*
/*
* It was a request. Prepare an answer message.
*/
- np->msgout[0] = M_EXTENDED;
- np->msgout[1] = 3;
- np->msgout[2] = M_X_SYNC_REQ;
- np->msgout[3] = per;
- np->msgout[4] = ofs;
+ spi_populate_sync_msg(np->msgout, per, ofs);
if (DEBUG_FLAGS & DEBUG_NEGO) {
sym_print_nego_msg(np, target, "sync msgout", np->msgout);
/*
* It was a request. Prepare an answer message.
*/
- np->msgout[0] = M_EXTENDED;
- np->msgout[1] = 6;
- np->msgout[2] = M_X_PPR_REQ;
- np->msgout[3] = per;
- np->msgout[4] = 0;
- np->msgout[5] = ofs;
- np->msgout[6] = wide;
- np->msgout[7] = opts;
+ spi_populate_ppr_msg(np->msgout, per, ofs, wide, opts);
if (DEBUG_FLAGS & DEBUG_NEGO) {
sym_print_nego_msg(np, target, "ppr msgout", np->msgout);
/*
* It was a request. Prepare an answer message.
*/
- np->msgout[0] = M_EXTENDED;
- np->msgout[1] = 2;
- np->msgout[2] = M_X_WIDE_REQ;
- np->msgout[3] = wide;
+ spi_populate_width_msg(np->msgout, wide);
np->msgin [0] = M_NOOP;
* a single SCSI command (Suggested by Justin Gibbs).
*/
if (tp->tgoal.offset) {
- np->msgout[0] = M_EXTENDED;
- np->msgout[1] = 3;
- np->msgout[2] = M_X_SYNC_REQ;
- np->msgout[3] = tp->tgoal.period;
- np->msgout[4] = tp->tgoal.offset;
+ spi_populate_sync_msg(np->msgout, tp->tgoal.period,
+ tp->tgoal.offset);
if (DEBUG_FLAGS & DEBUG_NEGO) {
sym_print_nego_msg(np, cp->target,
* Debugging purpose.
*/
#ifndef SYM_OPT_HANDLE_DEVICE_QUEUEING
- assert(lp->busy_itl == 0);
+ if (lp->busy_itl != 0)
+ goto out_free;
#endif
/*
* Allocate resources for tags if not yet.
* Debugging purpose.
*/
#ifndef SYM_OPT_HANDLE_DEVICE_QUEUEING
- assert(lp->busy_itl == 0 && lp->busy_itlq == 0);
+ if (lp->busy_itl != 0 || lp->busy_itlq != 0)
+ goto out_free;
#endif
/*
* Count this nexus for this LUN.
* extended error did occur, there is no residual.
*/
resid = 0;
- if (cp->phys.head.lastp != sym_goalp(cp))
+ if (cp->phys.head.lastp != cp->goalp)
resid = sym_compute_residual(np, cp);
/*