* than the level indicated above to trigger output.
*/
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/kernel.h>
-#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/bio.h>
#include <linux/genhd.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/blkpg.h>
-#include <linux/kref.h>
#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/string_helpers.h>
#include <asm/uaccess.h>
#include <scsi/scsi.h>
#include <scsi/scsi_ioctl.h>
#include <scsi/scsicam.h>
+#include "sd.h"
#include "scsi_logging.h"
-/*
- * More than enough for everybody ;) The huge number of majors
- * is a leftover from 16bit dev_t days, we don't really need that
- * much numberspace.
- */
-#define SD_MAJORS 16
-
-/*
- * This is limited by the naming scheme enforced in sd_probe,
- * add another character to it if you really need more disks.
- */
-#define SD_MAX_DISKS (((26 * 26) + 26 + 1) * 26)
+MODULE_AUTHOR("Eric Youngdale");
+MODULE_DESCRIPTION("SCSI disk (sd) driver");
+MODULE_LICENSE("GPL");
-/*
- * Time out in seconds for disks and Magneto-opticals (which are slower).
- */
-#define SD_TIMEOUT (30 * HZ)
-#define SD_MOD_TIMEOUT (75 * HZ)
+MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK0_MAJOR);
+MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK1_MAJOR);
+MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK2_MAJOR);
+MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK3_MAJOR);
+MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK4_MAJOR);
+MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK5_MAJOR);
+MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK6_MAJOR);
+MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK7_MAJOR);
+MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK8_MAJOR);
+MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK9_MAJOR);
+MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK10_MAJOR);
+MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK11_MAJOR);
+MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK12_MAJOR);
+MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK13_MAJOR);
+MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK14_MAJOR);
+MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK15_MAJOR);
+MODULE_ALIAS_SCSI_DEVICE(TYPE_DISK);
+MODULE_ALIAS_SCSI_DEVICE(TYPE_MOD);
+MODULE_ALIAS_SCSI_DEVICE(TYPE_RBC);
+
+#if !defined(CONFIG_DEBUG_BLOCK_EXT_DEVT)
+#define SD_MINORS 16
+#else
+#define SD_MINORS 0
+#endif
-/*
- * Number of allowed retries
- */
-#define SD_MAX_RETRIES 5
-#define SD_PASSTHROUGH_RETRIES 1
-
-static void scsi_disk_release(struct kref *kref);
-
-struct scsi_disk {
- struct scsi_driver *driver; /* always &sd_template */
- struct scsi_device *device;
- struct kref kref;
- struct gendisk *disk;
- unsigned int openers; /* protected by BKL for now, yuck */
- sector_t capacity; /* size in 512-byte sectors */
- u32 index;
- u8 media_present;
- u8 write_prot;
- unsigned WCE : 1; /* state of disk WCE bit */
- unsigned RCD : 1; /* state of disk RCD bit, unused */
-};
+static int sd_revalidate_disk(struct gendisk *);
+static int sd_probe(struct device *);
+static int sd_remove(struct device *);
+static void sd_shutdown(struct device *);
+static int sd_suspend(struct device *, pm_message_t state);
+static int sd_resume(struct device *);
+static void sd_rescan(struct device *);
+static int sd_done(struct scsi_cmnd *);
+static void sd_read_capacity(struct scsi_disk *sdkp, unsigned char *buffer);
+static void scsi_disk_release(struct device *cdev);
+static void sd_print_sense_hdr(struct scsi_disk *, struct scsi_sense_hdr *);
+static void sd_print_result(struct scsi_disk *, int);
-static DEFINE_IDR(sd_index_idr);
-static DEFINE_SPINLOCK(sd_index_lock);
+static DEFINE_IDA(sd_index_ida);
/* This semaphore is used to mediate the 0->1 reference get in the
* face of object destruction (i.e. we can't allow a get on an
* object after last put) */
-static DECLARE_MUTEX(sd_ref_sem);
+static DEFINE_MUTEX(sd_ref_mutex);
-static int sd_revalidate_disk(struct gendisk *disk);
-static void sd_rw_intr(struct scsi_cmnd * SCpnt);
+static const char *sd_cache_types[] = {
+ "write through", "none", "write back",
+ "write back, no read (daft)"
+};
-static int sd_probe(struct device *);
-static int sd_remove(struct device *);
-static void sd_shutdown(struct device *dev);
-static void sd_rescan(struct device *);
-static int sd_init_command(struct scsi_cmnd *);
-static int sd_issue_flush(struct device *, sector_t *);
-static void sd_end_flush(request_queue_t *, struct request *);
-static int sd_prepare_flush(request_queue_t *, struct request *);
-static void sd_read_capacity(struct scsi_disk *sdkp, char *diskname,
- unsigned char *buffer);
+static ssize_t
+sd_store_cache_type(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int i, ct = -1, rcd, wce, sp;
+ struct scsi_disk *sdkp = to_scsi_disk(dev);
+ struct scsi_device *sdp = sdkp->device;
+ char buffer[64];
+ char *buffer_data;
+ struct scsi_mode_data data;
+ struct scsi_sense_hdr sshdr;
+ int len;
+
+ if (sdp->type != TYPE_DISK)
+ /* no cache control on RBC devices; theoretically they
+ * can do it, but there's probably so many exceptions
+ * it's not worth the risk */
+ return -EINVAL;
+
+ for (i = 0; i < ARRAY_SIZE(sd_cache_types); i++) {
+ const int len = strlen(sd_cache_types[i]);
+ if (strncmp(sd_cache_types[i], buf, len) == 0 &&
+ buf[len] == '\n') {
+ ct = i;
+ break;
+ }
+ }
+ if (ct < 0)
+ return -EINVAL;
+ rcd = ct & 0x01 ? 1 : 0;
+ wce = ct & 0x02 ? 1 : 0;
+ if (scsi_mode_sense(sdp, 0x08, 8, buffer, sizeof(buffer), SD_TIMEOUT,
+ SD_MAX_RETRIES, &data, NULL))
+ return -EINVAL;
+ len = min_t(size_t, sizeof(buffer), data.length - data.header_length -
+ data.block_descriptor_length);
+ buffer_data = buffer + data.header_length +
+ data.block_descriptor_length;
+ buffer_data[2] &= ~0x05;
+ buffer_data[2] |= wce << 2 | rcd;
+ sp = buffer_data[0] & 0x80 ? 1 : 0;
+
+ if (scsi_mode_select(sdp, 1, sp, 8, buffer_data, len, SD_TIMEOUT,
+ SD_MAX_RETRIES, &data, &sshdr)) {
+ if (scsi_sense_valid(&sshdr))
+ sd_print_sense_hdr(sdkp, &sshdr);
+ return -EINVAL;
+ }
+ revalidate_disk(sdkp->disk);
+ return count;
+}
+
+static ssize_t
+sd_store_manage_start_stop(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct scsi_disk *sdkp = to_scsi_disk(dev);
+ struct scsi_device *sdp = sdkp->device;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EACCES;
+
+ sdp->manage_start_stop = simple_strtoul(buf, NULL, 10);
+
+ return count;
+}
+
+static ssize_t
+sd_store_allow_restart(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct scsi_disk *sdkp = to_scsi_disk(dev);
+ struct scsi_device *sdp = sdkp->device;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EACCES;
+
+ if (sdp->type != TYPE_DISK)
+ return -EINVAL;
+
+ sdp->allow_restart = simple_strtoul(buf, NULL, 10);
+
+ return count;
+}
+
+static ssize_t
+sd_show_cache_type(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct scsi_disk *sdkp = to_scsi_disk(dev);
+ int ct = sdkp->RCD + 2*sdkp->WCE;
+
+ return snprintf(buf, 40, "%s\n", sd_cache_types[ct]);
+}
+
+static ssize_t
+sd_show_fua(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct scsi_disk *sdkp = to_scsi_disk(dev);
+
+ return snprintf(buf, 20, "%u\n", sdkp->DPOFUA);
+}
+
+static ssize_t
+sd_show_manage_start_stop(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct scsi_disk *sdkp = to_scsi_disk(dev);
+ struct scsi_device *sdp = sdkp->device;
+
+ return snprintf(buf, 20, "%u\n", sdp->manage_start_stop);
+}
+
+static ssize_t
+sd_show_allow_restart(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct scsi_disk *sdkp = to_scsi_disk(dev);
+
+ return snprintf(buf, 40, "%d\n", sdkp->device->allow_restart);
+}
+
+static ssize_t
+sd_show_protection_type(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct scsi_disk *sdkp = to_scsi_disk(dev);
+
+ return snprintf(buf, 20, "%u\n", sdkp->protection_type);
+}
+
+static ssize_t
+sd_show_app_tag_own(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct scsi_disk *sdkp = to_scsi_disk(dev);
+
+ return snprintf(buf, 20, "%u\n", sdkp->ATO);
+}
+
+static struct device_attribute sd_disk_attrs[] = {
+ __ATTR(cache_type, S_IRUGO|S_IWUSR, sd_show_cache_type,
+ sd_store_cache_type),
+ __ATTR(FUA, S_IRUGO, sd_show_fua, NULL),
+ __ATTR(allow_restart, S_IRUGO|S_IWUSR, sd_show_allow_restart,
+ sd_store_allow_restart),
+ __ATTR(manage_start_stop, S_IRUGO|S_IWUSR, sd_show_manage_start_stop,
+ sd_store_manage_start_stop),
+ __ATTR(protection_type, S_IRUGO, sd_show_protection_type, NULL),
+ __ATTR(app_tag_own, S_IRUGO, sd_show_app_tag_own, NULL),
+ __ATTR_NULL,
+};
+
+static struct class sd_disk_class = {
+ .name = "scsi_disk",
+ .owner = THIS_MODULE,
+ .dev_release = scsi_disk_release,
+ .dev_attrs = sd_disk_attrs,
+};
static struct scsi_driver sd_template = {
.owner = THIS_MODULE,
.name = "sd",
.probe = sd_probe,
.remove = sd_remove,
+ .suspend = sd_suspend,
+ .resume = sd_resume,
.shutdown = sd_shutdown,
},
.rescan = sd_rescan,
- .init_command = sd_init_command,
- .issue_flush = sd_issue_flush,
- .prepare_flush = sd_prepare_flush,
- .end_flush = sd_end_flush,
+ .done = sd_done,
};
/*
}
}
-#define to_scsi_disk(obj) container_of(obj,struct scsi_disk,kref)
-
-static inline struct scsi_disk *scsi_disk(struct gendisk *disk)
+static struct scsi_disk *__scsi_disk_get(struct gendisk *disk)
{
- return container_of(disk->private_data, struct scsi_disk, driver);
+ struct scsi_disk *sdkp = NULL;
+
+ if (disk->private_data) {
+ sdkp = scsi_disk(disk);
+ if (scsi_device_get(sdkp->device) == 0)
+ get_device(&sdkp->dev);
+ else
+ sdkp = NULL;
+ }
+ return sdkp;
}
static struct scsi_disk *scsi_disk_get(struct gendisk *disk)
{
- struct scsi_disk *sdkp = NULL;
+ struct scsi_disk *sdkp;
- down(&sd_ref_sem);
- if (disk->private_data == NULL)
- goto out;
- sdkp = scsi_disk(disk);
- kref_get(&sdkp->kref);
- if (scsi_device_get(sdkp->device))
- goto out_put;
- up(&sd_ref_sem);
+ mutex_lock(&sd_ref_mutex);
+ sdkp = __scsi_disk_get(disk);
+ mutex_unlock(&sd_ref_mutex);
return sdkp;
+}
- out_put:
- kref_put(&sdkp->kref, scsi_disk_release);
- sdkp = NULL;
- out:
- up(&sd_ref_sem);
+static struct scsi_disk *scsi_disk_get_from_dev(struct device *dev)
+{
+ struct scsi_disk *sdkp;
+
+ mutex_lock(&sd_ref_mutex);
+ sdkp = dev_get_drvdata(dev);
+ if (sdkp)
+ sdkp = __scsi_disk_get(sdkp->disk);
+ mutex_unlock(&sd_ref_mutex);
return sdkp;
}
{
struct scsi_device *sdev = sdkp->device;
- down(&sd_ref_sem);
- kref_put(&sdkp->kref, scsi_disk_release);
+ mutex_lock(&sd_ref_mutex);
+ put_device(&sdkp->dev);
scsi_device_put(sdev);
- up(&sd_ref_sem);
+ mutex_unlock(&sd_ref_mutex);
}
/**
*
* Returns 1 if successful and 0 if error (or cannot be done now).
**/
-static int sd_init_command(struct scsi_cmnd * SCpnt)
+static int sd_prep_fn(struct request_queue *q, struct request *rq)
{
- unsigned int this_count, timeout;
- struct gendisk *disk;
- sector_t block;
- struct scsi_device *sdp = SCpnt->device;
- struct request *rq = SCpnt->request;
-
- timeout = sdp->timeout;
-
- /*
- * SG_IO from block layer already setup, just copy cdb basically
- */
- if (blk_pc_request(rq)) {
- if (sizeof(rq->cmd) > sizeof(SCpnt->cmnd))
- return 0;
-
- memcpy(SCpnt->cmnd, rq->cmd, sizeof(SCpnt->cmnd));
- SCpnt->cmd_len = rq->cmd_len;
- if (rq_data_dir(rq) == WRITE)
- SCpnt->sc_data_direction = DMA_TO_DEVICE;
- else if (rq->data_len)
- SCpnt->sc_data_direction = DMA_FROM_DEVICE;
- else
- SCpnt->sc_data_direction = DMA_NONE;
-
- this_count = rq->data_len;
- if (rq->timeout)
- timeout = rq->timeout;
+ struct scsi_cmnd *SCpnt;
+ struct scsi_device *sdp = q->queuedata;
+ struct gendisk *disk = rq->rq_disk;
+ struct scsi_disk *sdkp;
+ sector_t block = rq->sector;
+ sector_t threshold;
+ unsigned int this_count = rq->nr_sectors;
+ int ret, host_dif;
- SCpnt->transfersize = rq->data_len;
- SCpnt->allowed = SD_PASSTHROUGH_RETRIES;
- goto queue;
+ if (rq->cmd_type == REQ_TYPE_BLOCK_PC) {
+ ret = scsi_setup_blk_pc_cmnd(sdp, rq);
+ goto out;
+ } else if (rq->cmd_type != REQ_TYPE_FS) {
+ ret = BLKPREP_KILL;
+ goto out;
}
+ ret = scsi_setup_fs_cmnd(sdp, rq);
+ if (ret != BLKPREP_OK)
+ goto out;
+ SCpnt = rq->special;
+ sdkp = scsi_disk(disk);
- /*
- * we only do REQ_CMD and REQ_BLOCK_PC
- */
- if (!blk_fs_request(rq))
- return 0;
-
- disk = rq->rq_disk;
- block = rq->sector;
- this_count = SCpnt->request_bufflen >> 9;
+ /* from here on until we're complete, any goto out
+ * is used for a killable error condition */
+ ret = BLKPREP_KILL;
- SCSI_LOG_HLQUEUE(1, printk("sd_init_command: disk=%s, block=%llu, "
- "count=%d\n", disk->disk_name,
- (unsigned long long)block, this_count));
+ SCSI_LOG_HLQUEUE(1, scmd_printk(KERN_INFO, SCpnt,
+ "sd_init_command: block=%llu, "
+ "count=%d\n",
+ (unsigned long long)block,
+ this_count));
if (!sdp || !scsi_device_online(sdp) ||
block + rq->nr_sectors > get_capacity(disk)) {
- SCSI_LOG_HLQUEUE(2, printk("Finishing %ld sectors\n",
- rq->nr_sectors));
- SCSI_LOG_HLQUEUE(2, printk("Retry with 0x%p\n", SCpnt));
- return 0;
+ SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt,
+ "Finishing %ld sectors\n",
+ rq->nr_sectors));
+ SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt,
+ "Retry with 0x%p\n", SCpnt));
+ goto out;
}
if (sdp->changed) {
* the changed bit has been reset
*/
/* printk("SCSI disk has been changed. Prohibiting further I/O.\n"); */
- return 0;
+ goto out;
}
- SCSI_LOG_HLQUEUE(2, printk("%s : block=%llu\n",
- disk->disk_name, (unsigned long long)block));
+
+ /*
+ * Some SD card readers can't handle multi-sector accesses which touch
+ * the last one or two hardware sectors. Split accesses as needed.
+ */
+ threshold = get_capacity(disk) - SD_LAST_BUGGY_SECTORS *
+ (sdp->sector_size / 512);
+
+ if (unlikely(sdp->last_sector_bug && block + this_count > threshold)) {
+ if (block < threshold) {
+ /* Access up to the threshold but not beyond */
+ this_count = threshold - block;
+ } else {
+ /* Access only a single hardware sector */
+ this_count = sdp->sector_size / 512;
+ }
+ }
+
+ SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt, "block=%llu\n",
+ (unsigned long long)block));
/*
* If we have a 1K hardware sectorsize, prevent access to single
*/
if (sdp->sector_size == 1024) {
if ((block & 1) || (rq->nr_sectors & 1)) {
- printk(KERN_ERR "sd: Bad block number requested");
- return 0;
+ scmd_printk(KERN_ERR, SCpnt,
+ "Bad block number requested\n");
+ goto out;
} else {
block = block >> 1;
this_count = this_count >> 1;
}
if (sdp->sector_size == 2048) {
if ((block & 3) || (rq->nr_sectors & 3)) {
- printk(KERN_ERR "sd: Bad block number requested");
- return 0;
+ scmd_printk(KERN_ERR, SCpnt,
+ "Bad block number requested\n");
+ goto out;
} else {
block = block >> 2;
this_count = this_count >> 2;
}
if (sdp->sector_size == 4096) {
if ((block & 7) || (rq->nr_sectors & 7)) {
- printk(KERN_ERR "sd: Bad block number requested");
- return 0;
+ scmd_printk(KERN_ERR, SCpnt,
+ "Bad block number requested\n");
+ goto out;
} else {
block = block >> 3;
this_count = this_count >> 3;
}
if (rq_data_dir(rq) == WRITE) {
if (!sdp->writeable) {
- return 0;
+ goto out;
}
SCpnt->cmnd[0] = WRITE_6;
SCpnt->sc_data_direction = DMA_TO_DEVICE;
+
+ if (blk_integrity_rq(rq) &&
+ sd_dif_prepare(rq, block, sdp->sector_size) == -EIO)
+ goto out;
+
} else if (rq_data_dir(rq) == READ) {
SCpnt->cmnd[0] = READ_6;
SCpnt->sc_data_direction = DMA_FROM_DEVICE;
} else {
- printk(KERN_ERR "sd: Unknown command %lx\n", rq->flags);
-/* overkill panic("Unknown sd command %lx\n", rq->flags); */
- return 0;
+ scmd_printk(KERN_ERR, SCpnt, "Unknown command %x\n", rq->cmd_flags);
+ goto out;
}
- SCSI_LOG_HLQUEUE(2, printk("%s : %s %d/%ld 512 byte blocks.\n",
- disk->disk_name, (rq_data_dir(rq) == WRITE) ?
- "writing" : "reading", this_count, rq->nr_sectors));
+ SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt,
+ "%s %d/%ld 512 byte blocks.\n",
+ (rq_data_dir(rq) == WRITE) ?
+ "writing" : "reading", this_count,
+ rq->nr_sectors));
+
+ /* Set RDPROTECT/WRPROTECT if disk is formatted with DIF */
+ host_dif = scsi_host_dif_capable(sdp->host, sdkp->protection_type);
+ if (host_dif)
+ SCpnt->cmnd[1] = 1 << 5;
+ else
+ SCpnt->cmnd[1] = 0;
- SCpnt->cmnd[1] = 0;
-
if (block > 0xffffffff) {
SCpnt->cmnd[0] += READ_16 - READ_6;
+ SCpnt->cmnd[1] |= blk_fua_rq(rq) ? 0x8 : 0;
SCpnt->cmnd[2] = sizeof(block) > 4 ? (unsigned char) (block >> 56) & 0xff : 0;
SCpnt->cmnd[3] = sizeof(block) > 4 ? (unsigned char) (block >> 48) & 0xff : 0;
SCpnt->cmnd[4] = sizeof(block) > 4 ? (unsigned char) (block >> 40) & 0xff : 0;
SCpnt->cmnd[13] = (unsigned char) this_count & 0xff;
SCpnt->cmnd[14] = SCpnt->cmnd[15] = 0;
} else if ((this_count > 0xff) || (block > 0x1fffff) ||
+ scsi_device_protection(SCpnt->device) ||
SCpnt->device->use_10_for_rw) {
if (this_count > 0xffff)
this_count = 0xffff;
SCpnt->cmnd[0] += READ_10 - READ_6;
+ SCpnt->cmnd[1] |= blk_fua_rq(rq) ? 0x8 : 0;
SCpnt->cmnd[2] = (unsigned char) (block >> 24) & 0xff;
SCpnt->cmnd[3] = (unsigned char) (block >> 16) & 0xff;
SCpnt->cmnd[4] = (unsigned char) (block >> 8) & 0xff;
SCpnt->cmnd[7] = (unsigned char) (this_count >> 8) & 0xff;
SCpnt->cmnd[8] = (unsigned char) this_count & 0xff;
} else {
+ if (unlikely(blk_fua_rq(rq))) {
+ /*
+ * This happens only if this drive failed
+ * 10byte rw command with ILLEGAL_REQUEST
+ * during operation and thus turned off
+ * use_10_for_rw.
+ */
+ scmd_printk(KERN_ERR, SCpnt,
+ "FUA write on READ/WRITE(6) drive\n");
+ goto out;
+ }
+
SCpnt->cmnd[1] |= (unsigned char) ((block >> 16) & 0x1f);
SCpnt->cmnd[2] = (unsigned char) ((block >> 8) & 0xff);
SCpnt->cmnd[3] = (unsigned char) block & 0xff;
SCpnt->cmnd[4] = (unsigned char) this_count;
SCpnt->cmnd[5] = 0;
}
- SCpnt->request_bufflen = SCpnt->bufflen =
- this_count * sdp->sector_size;
+ SCpnt->sdb.length = this_count * sdp->sector_size;
+
+ /* If DIF or DIX is enabled, tell HBA how to handle request */
+ if (host_dif || scsi_prot_sg_count(SCpnt))
+ sd_dif_op(SCpnt, host_dif, scsi_prot_sg_count(SCpnt),
+ sdkp->protection_type);
/*
* We shouldn't disconnect in the middle of a sector, so with a dumb
SCpnt->underflow = this_count << 9;
SCpnt->allowed = SD_MAX_RETRIES;
-queue:
- SCpnt->timeout_per_command = timeout;
-
- /*
- * This is the completion routine we use. This is matched in terms
- * of capability to this function.
- */
- SCpnt->done = sd_rw_intr;
-
/*
* This indicates that the command is ready from our end to be
* queued.
*/
- return 1;
+ ret = BLKPREP_OK;
+ out:
+ return scsi_prep_return(q, rq, ret);
}
/**
* In the latter case @inode and @filp carry an abridged amount
* of information as noted above.
**/
-static int sd_open(struct inode *inode, struct file *filp)
+static int sd_open(struct block_device *bdev, fmode_t mode)
{
- struct gendisk *disk = inode->i_bdev->bd_disk;
- struct scsi_disk *sdkp;
+ struct scsi_disk *sdkp = scsi_disk_get(bdev->bd_disk);
struct scsi_device *sdev;
int retval;
- if (!(sdkp = scsi_disk_get(disk)))
+ if (!sdkp)
return -ENXIO;
-
- SCSI_LOG_HLQUEUE(3, printk("sd_open: disk=%s\n", disk->disk_name));
+ SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_open\n"));
sdev = sdkp->device;
goto error_out;
if (sdev->removable || sdkp->write_prot)
- check_disk_change(inode->i_bdev);
+ check_disk_change(bdev);
/*
* If the drive is empty, just let the open fail.
*/
retval = -ENOMEDIUM;
- if (sdev->removable && !sdkp->media_present &&
- !(filp->f_flags & O_NDELAY))
+ if (sdev->removable && !sdkp->media_present && !(mode & FMODE_NDELAY))
goto error_out;
/*
* if the user expects to be able to write to the thing.
*/
retval = -EROFS;
- if (sdkp->write_prot && (filp->f_mode & FMODE_WRITE))
+ if (sdkp->write_prot && (mode & FMODE_WRITE))
goto error_out;
/*
* Note: may block (uninterruptible) if error recovery is underway
* on this disk.
**/
-static int sd_release(struct inode *inode, struct file *filp)
+static int sd_release(struct gendisk *disk, fmode_t mode)
{
- struct gendisk *disk = inode->i_bdev->bd_disk;
struct scsi_disk *sdkp = scsi_disk(disk);
struct scsi_device *sdev = sdkp->device;
- SCSI_LOG_HLQUEUE(3, printk("sd_release: disk=%s\n", disk->disk_name));
+ SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_release\n"));
if (!--sdkp->openers && sdev->removable) {
if (scsi_block_when_processing_errors(sdev))
return 0;
}
-static int sd_hdio_getgeo(struct block_device *bdev, struct hd_geometry __user *loc)
+static int sd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
{
struct scsi_disk *sdkp = scsi_disk(bdev->bd_disk);
struct scsi_device *sdp = sdkp->device;
else
scsicam_bios_param(bdev, sdkp->capacity, diskinfo);
- if (put_user(diskinfo[0], &loc->heads))
- return -EFAULT;
- if (put_user(diskinfo[1], &loc->sectors))
- return -EFAULT;
- if (put_user(diskinfo[2], &loc->cylinders))
- return -EFAULT;
- if (put_user((unsigned)get_start_sect(bdev),
- (unsigned long __user *)&loc->start))
- return -EFAULT;
+ geo->heads = diskinfo[0];
+ geo->sectors = diskinfo[1];
+ geo->cylinders = diskinfo[2];
return 0;
}
* success as well). Returns a negated errno value in case of error.
*
* Note: most ioctls are forward onto the block subsystem or further
- * down in the scsi subsytem.
+ * down in the scsi subsystem.
**/
-static int sd_ioctl(struct inode * inode, struct file * filp,
+static int sd_ioctl(struct block_device *bdev, fmode_t mode,
unsigned int cmd, unsigned long arg)
{
- struct block_device *bdev = inode->i_bdev;
struct gendisk *disk = bdev->bd_disk;
struct scsi_device *sdp = scsi_disk(disk)->device;
void __user *p = (void __user *)arg;
* may try and take the device offline, in which case all further
* access to the device is prohibited.
*/
- error = scsi_nonblockable_ioctl(sdp, cmd, p, filp);
+ error = scsi_nonblockable_ioctl(sdp, cmd, p,
+ (mode & FMODE_NDELAY) != 0);
if (!scsi_block_when_processing_errors(sdp) || !error)
return error;
- if (cmd == HDIO_GETGEO) {
- if (!arg)
- return -EINVAL;
- return sd_hdio_getgeo(bdev, p);
- }
-
/*
* Send SCSI addressing ioctls directly to mid level, send other
* ioctls to block level and then onto mid level if they can't be
case SCSI_IOCTL_GET_BUS_NUMBER:
return scsi_ioctl(sdp, cmd, p);
default:
- error = scsi_cmd_ioctl(filp, disk, cmd, p);
+ error = scsi_cmd_ioctl(disk->queue, disk, mode, cmd, p);
if (error != -ENOTTY)
return error;
}
{
struct scsi_disk *sdkp = scsi_disk(disk);
struct scsi_device *sdp = sdkp->device;
+ struct scsi_sense_hdr *sshdr = NULL;
int retval;
- SCSI_LOG_HLQUEUE(3, printk("sd_media_changed: disk=%s\n",
- disk->disk_name));
+ SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_media_changed\n"));
if (!sdp->removable)
return 0;
* can deal with it then. It is only because of unrecoverable errors
* that we would ever take a device offline in the first place.
*/
- if (!scsi_device_online(sdp))
- goto not_present;
+ if (!scsi_device_online(sdp)) {
+ set_media_not_present(sdkp);
+ retval = 1;
+ goto out;
+ }
/*
* Using TEST_UNIT_READY enables differentiation between drive with
* sd_revalidate() is called.
*/
retval = -ENODEV;
- if (scsi_block_when_processing_errors(sdp))
- retval = scsi_test_unit_ready(sdp, SD_TIMEOUT, SD_MAX_RETRIES);
+
+ if (scsi_block_when_processing_errors(sdp)) {
+ sshdr = kzalloc(sizeof(*sshdr), GFP_KERNEL);
+ retval = scsi_test_unit_ready(sdp, SD_TIMEOUT, SD_MAX_RETRIES,
+ sshdr);
+ }
/*
* Unable to test, unit probably not ready. This usually
* and we will figure it out later once the drive is
* available again.
*/
- if (retval)
- goto not_present;
+ if (retval || (scsi_sense_valid(sshdr) &&
+ /* 0x3a is medium not present */
+ sshdr->asc == 0x3a)) {
+ set_media_not_present(sdkp);
+ retval = 1;
+ goto out;
+ }
/*
* For removable scsi disk we have to recognise the presence
retval = sdp->changed;
sdp->changed = 0;
-
+out:
+ if (retval != sdkp->previous_state)
+ sdev_evt_send_simple(sdp, SDEV_EVT_MEDIA_CHANGE, GFP_KERNEL);
+ sdkp->previous_state = retval;
+ kfree(sshdr);
return retval;
-
-not_present:
- set_media_not_present(sdkp);
- return 1;
}
-static int sd_sync_cache(struct scsi_device *sdp)
+static int sd_sync_cache(struct scsi_disk *sdkp)
{
int retries, res;
+ struct scsi_device *sdp = sdkp->device;
struct scsi_sense_hdr sshdr;
if (!scsi_device_online(sdp))
break;
}
- if (res) { printk(KERN_WARNING "FAILED\n status = %x, message = %02x, "
- "host = %d, driver = %02x\n ",
- status_byte(res), msg_byte(res),
- host_byte(res), driver_byte(res));
- if (driver_byte(res) & DRIVER_SENSE)
- scsi_print_sense_hdr("sd", &sshdr);
+ if (res) {
+ sd_print_result(sdkp, res);
+ if (driver_byte(res) & DRIVER_SENSE)
+ sd_print_sense_hdr(sdkp, &sshdr);
}
- return res;
-}
-
-static int sd_issue_flush(struct device *dev, sector_t *error_sector)
-{
- struct scsi_device *sdp = to_scsi_device(dev);
- struct scsi_disk *sdkp = dev_get_drvdata(dev);
-
- if (!sdkp)
- return -ENODEV;
-
- if (!sdkp->WCE)
- return 0;
-
- return sd_sync_cache(sdp);
+ if (res)
+ return -EIO;
+ return 0;
}
-static void sd_end_flush(request_queue_t *q, struct request *flush_rq)
+static void sd_prepare_flush(struct request_queue *q, struct request *rq)
{
- struct request *rq = flush_rq->end_io_data;
- struct scsi_cmnd *cmd = rq->special;
- unsigned int bytes = rq->hard_nr_sectors << 9;
-
- if (!flush_rq->errors) {
- spin_unlock(q->queue_lock);
- scsi_io_completion(cmd, bytes, 0);
- spin_lock(q->queue_lock);
- } else if (blk_barrier_postflush(rq)) {
- spin_unlock(q->queue_lock);
- scsi_io_completion(cmd, 0, bytes);
- spin_lock(q->queue_lock);
- } else {
- /*
- * force journal abort of barriers
- */
- end_that_request_first(rq, -EOPNOTSUPP, rq->hard_nr_sectors);
- end_that_request_last(rq);
- }
+ rq->cmd_type = REQ_TYPE_BLOCK_PC;
+ rq->timeout = SD_TIMEOUT;
+ rq->cmd[0] = SYNCHRONIZE_CACHE;
+ rq->cmd_len = 10;
}
-static int sd_prepare_flush(request_queue_t *q, struct request *rq)
+static void sd_rescan(struct device *dev)
{
- struct scsi_device *sdev = q->queuedata;
- struct scsi_disk *sdkp = dev_get_drvdata(&sdev->sdev_gendev);
+ struct scsi_disk *sdkp = scsi_disk_get_from_dev(dev);
- if (sdkp->WCE) {
- memset(rq->cmd, 0, sizeof(rq->cmd));
- rq->flags |= REQ_BLOCK_PC | REQ_SOFTBARRIER;
- rq->timeout = SD_TIMEOUT;
- rq->cmd[0] = SYNCHRONIZE_CACHE;
- return 1;
+ if (sdkp) {
+ revalidate_disk(sdkp->disk);
+ scsi_disk_put(sdkp);
}
-
- return 0;
-}
-
-static void sd_rescan(struct device *dev)
-{
- struct scsi_disk *sdkp = dev_get_drvdata(dev);
- sd_revalidate_disk(sdkp->disk);
}
* This gets directly called from VFS. When the ioctl
* is not recognized we go back to the other translation paths.
*/
-static long sd_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+static int sd_compat_ioctl(struct block_device *bdev, fmode_t mode,
+ unsigned int cmd, unsigned long arg)
{
- struct block_device *bdev = file->f_dentry->d_inode->i_bdev;
- struct gendisk *disk = bdev->bd_disk;
- struct scsi_device *sdev = scsi_disk(disk)->device;
+ struct scsi_device *sdev = scsi_disk(bdev->bd_disk)->device;
/*
* If we are in the middle of error recovery, don't let anyone
.owner = THIS_MODULE,
.open = sd_open,
.release = sd_release,
- .ioctl = sd_ioctl,
+ .locked_ioctl = sd_ioctl,
+ .getgeo = sd_getgeo,
#ifdef CONFIG_COMPAT
.compat_ioctl = sd_compat_ioctl,
#endif
.revalidate_disk = sd_revalidate_disk,
};
+static unsigned int sd_completed_bytes(struct scsi_cmnd *scmd)
+{
+ u64 start_lba = scmd->request->sector;
+ u64 end_lba = scmd->request->sector + (scsi_bufflen(scmd) / 512);
+ u64 bad_lba;
+ int info_valid;
+
+ if (!blk_fs_request(scmd->request))
+ return 0;
+
+ info_valid = scsi_get_sense_info_fld(scmd->sense_buffer,
+ SCSI_SENSE_BUFFERSIZE,
+ &bad_lba);
+ if (!info_valid)
+ return 0;
+
+ if (scsi_bufflen(scmd) <= scmd->device->sector_size)
+ return 0;
+
+ if (scmd->device->sector_size < 512) {
+ /* only legitimate sector_size here is 256 */
+ start_lba <<= 1;
+ end_lba <<= 1;
+ } else {
+ /* be careful ... don't want any overflows */
+ u64 factor = scmd->device->sector_size / 512;
+ do_div(start_lba, factor);
+ do_div(end_lba, factor);
+ }
+
+ /* The bad lba was reported incorrectly, we have no idea where
+ * the error is.
+ */
+ if (bad_lba < start_lba || bad_lba >= end_lba)
+ return 0;
+
+ /* This computation should always be done in terms of
+ * the resolution of the device's medium.
+ */
+ return (bad_lba - start_lba) * scmd->device->sector_size;
+}
+
/**
- * sd_rw_intr - bottom half handler: called when the lower level
+ * sd_done - bottom half handler: called when the lower level
* driver has completed (successfully or otherwise) a scsi command.
* @SCpnt: mid-level's per command structure.
*
* Note: potentially run from within an ISR. Must not block.
**/
-static void sd_rw_intr(struct scsi_cmnd * SCpnt)
+static int sd_done(struct scsi_cmnd *SCpnt)
{
int result = SCpnt->result;
- int this_count = SCpnt->bufflen;
- int good_bytes = (result == 0 ? this_count : 0);
- sector_t block_sectors = 1;
- u64 first_err_block;
- sector_t error_sector;
+ unsigned int good_bytes = result ? 0 : scsi_bufflen(SCpnt);
struct scsi_sense_hdr sshdr;
int sense_valid = 0;
int sense_deferred = 0;
- int info_valid;
if (result) {
sense_valid = scsi_command_normalize_sense(SCpnt, &sshdr);
if (sense_valid)
sense_deferred = scsi_sense_is_deferred(&sshdr);
}
-
#ifdef CONFIG_SCSI_LOGGING
- SCSI_LOG_HLCOMPLETE(1, printk("sd_rw_intr: %s: res=0x%x\n",
- SCpnt->request->rq_disk->disk_name, result));
+ SCSI_LOG_HLCOMPLETE(1, scsi_print_result(SCpnt));
if (sense_valid) {
- SCSI_LOG_HLCOMPLETE(1, printk("sd_rw_intr: sb[respc,sk,asc,"
- "ascq]=%x,%x,%x,%x\n", sshdr.response_code,
- sshdr.sense_key, sshdr.asc, sshdr.ascq));
+ SCSI_LOG_HLCOMPLETE(1, scmd_printk(KERN_INFO, SCpnt,
+ "sd_done: sb[respc,sk,asc,"
+ "ascq]=%x,%x,%x,%x\n",
+ sshdr.response_code,
+ sshdr.sense_key, sshdr.asc,
+ sshdr.ascq));
}
#endif
- /*
- Handle MEDIUM ERRORs that indicate partial success. Since this is a
- relatively rare error condition, no care is taken to avoid
- unnecessary additional work such as memcpy's that could be avoided.
- */
-
- /*
- * If SG_IO from block layer then set good_bytes to stop retries;
- * else if errors, check them, and if necessary prepare for
- * (partial) retries.
- */
- if (blk_pc_request(SCpnt->request))
- good_bytes = this_count;
- else if (driver_byte(result) != 0 &&
- sense_valid && !sense_deferred) {
- switch (sshdr.sense_key) {
- case MEDIUM_ERROR:
- if (!blk_fs_request(SCpnt->request))
- break;
- info_valid = scsi_get_sense_info_fld(
- SCpnt->sense_buffer, SCSI_SENSE_BUFFERSIZE,
- &first_err_block);
- /*
- * May want to warn and skip if following cast results
- * in actual truncation (if sector_t < 64 bits)
- */
- error_sector = (sector_t)first_err_block;
- if (SCpnt->request->bio != NULL)
- block_sectors = bio_sectors(SCpnt->request->bio);
- switch (SCpnt->device->sector_size) {
- case 1024:
- error_sector <<= 1;
- if (block_sectors < 2)
- block_sectors = 2;
- break;
- case 2048:
- error_sector <<= 2;
- if (block_sectors < 4)
- block_sectors = 4;
- break;
- case 4096:
- error_sector <<=3;
- if (block_sectors < 8)
- block_sectors = 8;
- break;
- case 256:
- error_sector >>= 1;
- break;
- default:
- break;
- }
-
- error_sector &= ~(block_sectors - 1);
- good_bytes = (error_sector - SCpnt->request->sector) << 9;
- if (good_bytes < 0 || good_bytes >= this_count)
- good_bytes = 0;
- break;
+ if (driver_byte(result) != DRIVER_SENSE &&
+ (!sense_valid || sense_deferred))
+ goto out;
- case RECOVERED_ERROR: /* an error occurred, but it recovered */
- case NO_SENSE: /* LLDD got sense data */
- /*
- * Inform the user, but make sure that it's not treated
- * as a hard error.
- */
+ switch (sshdr.sense_key) {
+ case HARDWARE_ERROR:
+ case MEDIUM_ERROR:
+ good_bytes = sd_completed_bytes(SCpnt);
+ break;
+ case RECOVERED_ERROR:
+ /* Inform the user, but make sure that it's not treated
+ * as a hard error.
+ */
+ scsi_print_sense("sd", SCpnt);
+ SCpnt->result = 0;
+ memset(SCpnt->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
+ good_bytes = scsi_bufflen(SCpnt);
+ break;
+ case NO_SENSE:
+ /* This indicates a false check condition, so ignore it. An
+ * unknown amount of data was transferred so treat it as an
+ * error.
+ */
+ scsi_print_sense("sd", SCpnt);
+ SCpnt->result = 0;
+ memset(SCpnt->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
+ break;
+ case ABORTED_COMMAND:
+ if (sshdr.asc == 0x10) { /* DIF: Disk detected corruption */
+ scsi_print_result(SCpnt);
scsi_print_sense("sd", SCpnt);
- SCpnt->result = 0;
- memset(SCpnt->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
- good_bytes = this_count;
- break;
-
- case ILLEGAL_REQUEST:
- if (SCpnt->device->use_10_for_rw &&
- (SCpnt->cmnd[0] == READ_10 ||
- SCpnt->cmnd[0] == WRITE_10))
- SCpnt->device->use_10_for_rw = 0;
- if (SCpnt->device->use_10_for_ms &&
- (SCpnt->cmnd[0] == MODE_SENSE_10 ||
- SCpnt->cmnd[0] == MODE_SELECT_10))
- SCpnt->device->use_10_for_ms = 0;
- break;
-
- default:
- break;
+ good_bytes = sd_completed_bytes(SCpnt);
+ }
+ break;
+ case ILLEGAL_REQUEST:
+ if (sshdr.asc == 0x10) { /* DIX: HBA detected corruption */
+ scsi_print_result(SCpnt);
+ scsi_print_sense("sd", SCpnt);
+ good_bytes = sd_completed_bytes(SCpnt);
}
+ break;
+ default:
+ break;
}
- /*
- * This calls the generic completion function, now that we know
- * how many actual sectors finished, and how many sectors we need
- * to say have failed.
- */
- scsi_io_completion(SCpnt, good_bytes, block_sectors << 9);
+ out:
+ if (rq_data_dir(SCpnt->request) == READ && scsi_prot_sg_count(SCpnt))
+ sd_dif_complete(SCpnt, good_bytes);
+
+ return good_bytes;
}
static int media_not_present(struct scsi_disk *sdkp,
* spinup disk - called only in sd_revalidate_disk()
*/
static void
-sd_spinup_disk(struct scsi_disk *sdkp, char *diskname)
+sd_spinup_disk(struct scsi_disk *sdkp)
{
unsigned char cmd[10];
unsigned long spintime_expire = 0;
&sshdr, SD_TIMEOUT,
SD_MAX_RETRIES);
+ /*
+ * If the drive has indicated to us that it
+ * doesn't have any media in it, don't bother
+ * with any more polling.
+ */
+ if (media_not_present(sdkp, &sshdr))
+ return;
+
if (the_result)
sense_valid = scsi_sense_valid(&sshdr);
retries++;
((driver_byte(the_result) & DRIVER_SENSE) &&
sense_valid && sshdr.sense_key == UNIT_ATTENTION)));
- /*
- * If the drive has indicated to us that it doesn't have
- * any media in it, don't bother with any of the rest of
- * this crap.
- */
- if (media_not_present(sdkp, &sshdr))
- return;
-
if ((driver_byte(the_result) & DRIVER_SENSE) == 0) {
/* no sense, TUR either succeeded or failed
* with a status error */
- if(!spintime && !scsi_status_is_good(the_result))
- printk(KERN_NOTICE "%s: Unit Not Ready, "
- "error = 0x%x\n", diskname, the_result);
+ if(!spintime && !scsi_status_is_good(the_result)) {
+ sd_printk(KERN_NOTICE, sdkp, "Unit Not Ready\n");
+ sd_print_result(sdkp, the_result);
+ }
break;
}
*/
} else if (sense_valid && sshdr.sense_key == NOT_READY) {
if (!spintime) {
- printk(KERN_NOTICE "%s: Spinning up disk...",
- diskname);
+ sd_printk(KERN_NOTICE, sdkp, "Spinning up disk...");
cmd[0] = START_STOP;
cmd[1] = 1; /* Return immediately */
memset((void *) &cmd[2], 0, 8);
cmd[4] = 1; /* Start spin cycle */
+ if (sdkp->device->start_stop_pwr_cond)
+ cmd[4] |= 1 << 4;
scsi_execute_req(sdkp->device, cmd, DMA_NONE,
NULL, 0, &sshdr,
SD_TIMEOUT, SD_MAX_RETRIES);
/* we don't understand the sense code, so it's
* probably pointless to loop */
if(!spintime) {
- printk(KERN_NOTICE "%s: Unit Not Ready, "
- "sense:\n", diskname);
- scsi_print_sense_hdr("", &sshdr);
+ sd_printk(KERN_NOTICE, sdkp, "Unit Not Ready\n");
+ sd_print_sense_hdr(sdkp, &sshdr);
}
break;
}
}
}
+
+/*
+ * Determine whether disk supports Data Integrity Field.
+ */
+void sd_read_protection_type(struct scsi_disk *sdkp, unsigned char *buffer)
+{
+ struct scsi_device *sdp = sdkp->device;
+ u8 type;
+
+ if (scsi_device_protection(sdp) == 0 || (buffer[12] & 1) == 0)
+ type = 0;
+ else
+ type = ((buffer[12] >> 1) & 7) + 1; /* P_TYPE 0 = Type 1 */
+
+ sdkp->protection_type = type;
+
+ switch (type) {
+ case SD_DIF_TYPE0_PROTECTION:
+ case SD_DIF_TYPE1_PROTECTION:
+ case SD_DIF_TYPE3_PROTECTION:
+ break;
+
+ case SD_DIF_TYPE2_PROTECTION:
+ sd_printk(KERN_ERR, sdkp, "formatted with DIF Type 2 " \
+ "protection which is currently unsupported. " \
+ "Disabling disk!\n");
+ goto disable;
+
+ default:
+ sd_printk(KERN_ERR, sdkp, "formatted with unknown " \
+ "protection type %d. Disabling disk!\n", type);
+ goto disable;
+ }
+
+ return;
+
+disable:
+ sdkp->capacity = 0;
+}
+
/*
* read disk capacity
*/
static void
-sd_read_capacity(struct scsi_disk *sdkp, char *diskname,
- unsigned char *buffer)
+sd_read_capacity(struct scsi_disk *sdkp, unsigned char *buffer)
{
unsigned char cmd[16];
int the_result, retries;
int sector_size = 0;
- int longrc = 0;
+ /* Force READ CAPACITY(16) when PROTECT=1 */
+ int longrc = scsi_device_protection(sdkp->device) ? 1 : 0;
struct scsi_sense_hdr sshdr;
int sense_valid = 0;
struct scsi_device *sdp = sdkp->device;
memset((void *) cmd, 0, 16);
cmd[0] = SERVICE_ACTION_IN;
cmd[1] = SAI_READ_CAPACITY_16;
- cmd[13] = 12;
- memset((void *) buffer, 0, 12);
+ cmd[13] = 13;
+ memset((void *) buffer, 0, 13);
} else {
cmd[0] = READ_CAPACITY;
memset((void *) &cmd[1], 0, 9);
}
the_result = scsi_execute_req(sdp, cmd, DMA_FROM_DEVICE,
- buffer, longrc ? 12 : 8, &sshdr,
+ buffer, longrc ? 13 : 8, &sshdr,
SD_TIMEOUT, SD_MAX_RETRIES);
if (media_not_present(sdkp, &sshdr))
} while (the_result && retries);
if (the_result && !longrc) {
- printk(KERN_NOTICE "%s : READ CAPACITY failed.\n"
- "%s : status=%x, message=%02x, host=%d, driver=%02x \n",
- diskname, diskname,
- status_byte(the_result),
- msg_byte(the_result),
- host_byte(the_result),
- driver_byte(the_result));
-
+ sd_printk(KERN_NOTICE, sdkp, "READ CAPACITY failed\n");
+ sd_print_result(sdkp, the_result);
if (driver_byte(the_result) & DRIVER_SENSE)
- scsi_print_sense_hdr("sd", &sshdr);
+ sd_print_sense_hdr(sdkp, &sshdr);
else
- printk("%s : sense not available. \n", diskname);
+ sd_printk(KERN_NOTICE, sdkp, "Sense not available.\n");
/* Set dirty bit for removable devices if not ready -
* sometimes drives will not report this properly. */
/* Either no media are present but the drive didn't tell us,
or they are present but the read capacity command fails */
/* sdkp->media_present = 0; -- not always correct */
- sdkp->capacity = 0x200000; /* 1 GB - random */
+ sdkp->capacity = 0; /* unknown mapped to zero - as usual */
return;
} else if (the_result && longrc) {
/* READ CAPACITY(16) has been failed */
- printk(KERN_NOTICE "%s : READ CAPACITY(16) failed.\n"
- "%s : status=%x, message=%02x, host=%d, driver=%02x \n",
- diskname, diskname,
- status_byte(the_result),
- msg_byte(the_result),
- host_byte(the_result),
- driver_byte(the_result));
- printk(KERN_NOTICE "%s : use 0xffffffff as device size\n",
- diskname);
-
+ sd_printk(KERN_NOTICE, sdkp, "READ CAPACITY(16) failed\n");
+ sd_print_result(sdkp, the_result);
+ sd_printk(KERN_NOTICE, sdkp, "Use 0xffffffff as device size\n");
+
sdkp->capacity = 1 + (sector_t) 0xffffffff;
goto got_data;
}
if (buffer[0] == 0xff && buffer[1] == 0xff &&
buffer[2] == 0xff && buffer[3] == 0xff) {
if(sizeof(sdkp->capacity) > 4) {
- printk(KERN_NOTICE "%s : very big device. try to use"
- " READ CAPACITY(16).\n", diskname);
+ sd_printk(KERN_NOTICE, sdkp, "Very big device. "
+ "Trying to use READ CAPACITY(16).\n");
longrc = 1;
goto repeat;
}
- printk(KERN_ERR "%s: too big for this kernel. Use a "
- "kernel compiled with support for large block "
- "devices.\n", diskname);
+ sd_printk(KERN_ERR, sdkp, "Too big for this kernel. Use "
+ "a kernel compiled with support for large "
+ "block devices.\n");
sdkp->capacity = 0;
goto got_data;
}
sector_size = (buffer[8] << 24) |
(buffer[9] << 16) | (buffer[10] << 8) | buffer[11];
+
+ sd_read_protection_type(sdkp, buffer);
}
/* Some devices return the total number of sectors, not the
* highest sector number. Make the necessary adjustment. */
- if (sdp->fix_capacity)
+ if (sdp->fix_capacity) {
--sdkp->capacity;
+ /* Some devices have version which report the correct sizes
+ * and others which do not. We guess size according to a heuristic
+ * and err on the side of lowering the capacity. */
+ } else {
+ if (sdp->guess_capacity)
+ if (sdkp->capacity & 0x01) /* odd sizes are odd */
+ --sdkp->capacity;
+ }
+
got_data:
if (sector_size == 0) {
sector_size = 512;
- printk(KERN_NOTICE "%s : sector size 0 reported, "
- "assuming 512.\n", diskname);
+ sd_printk(KERN_NOTICE, sdkp, "Sector size 0 reported, "
+ "assuming 512.\n");
}
if (sector_size != 512 &&
sector_size != 2048 &&
sector_size != 4096 &&
sector_size != 256) {
- printk(KERN_NOTICE "%s : unsupported sector size "
- "%d.\n", diskname, sector_size);
+ sd_printk(KERN_NOTICE, sdkp, "Unsupported sector size %d.\n",
+ sector_size);
/*
* The user might want to re-format the drive with
* a supported sectorsize. Once this happens, it
*/
sector_size = 512;
}
+ blk_queue_hardsect_size(sdp->request_queue, sector_size);
+
{
- /*
- * The msdos fs needs to know the hardware sector size
- * So I have created this table. See ll_rw_blk.c
- * Jacques Gelinas (Jacques@solucorp.qc.ca)
- */
- int hard_sector = sector_size;
- sector_t sz = sdkp->capacity * (hard_sector/256);
- request_queue_t *queue = sdp->request_queue;
- sector_t mb;
-
- blk_queue_hardsect_size(queue, hard_sector);
- /* avoid 64-bit division on 32-bit platforms */
- mb = sz >> 1;
- sector_div(sz, 1250);
- mb -= sz - 974;
- sector_div(mb, 1950);
-
- printk(KERN_NOTICE "SCSI device %s: "
- "%llu %d-byte hdwr sectors (%llu MB)\n",
- diskname, (unsigned long long)sdkp->capacity,
- hard_sector, (unsigned long long)mb);
+ char cap_str_2[10], cap_str_10[10];
+ u64 sz = (u64)sdkp->capacity << ilog2(sector_size);
+
+ string_get_size(sz, STRING_UNITS_2, cap_str_2,
+ sizeof(cap_str_2));
+ string_get_size(sz, STRING_UNITS_10, cap_str_10,
+ sizeof(cap_str_10));
+
+ sd_printk(KERN_NOTICE, sdkp,
+ "%llu %d-byte hardware sectors: (%s/%s)\n",
+ (unsigned long long)sdkp->capacity,
+ sector_size, cap_str_10, cap_str_2);
}
/* Rescale capacity to 512-byte units */
/*
* read write protect setting, if possible - called only in sd_revalidate_disk()
- * called with buffer of length 512
+ * called with buffer of length SD_BUF_SIZE
*/
static void
-sd_read_write_protect_flag(struct scsi_disk *sdkp, char *diskname,
- unsigned char *buffer)
+sd_read_write_protect_flag(struct scsi_disk *sdkp, unsigned char *buffer)
{
int res;
struct scsi_device *sdp = sdkp->device;
set_disk_ro(sdkp->disk, 0);
if (sdp->skip_ms_page_3f) {
- printk(KERN_NOTICE "%s: assuming Write Enabled\n", diskname);
+ sd_printk(KERN_NOTICE, sdkp, "Assuming Write Enabled\n");
return;
}
}
if (!scsi_status_is_good(res)) {
- printk(KERN_WARNING
- "%s: test WP failed, assume Write Enabled\n", diskname);
+ sd_printk(KERN_WARNING, sdkp,
+ "Test WP failed, assume Write Enabled\n");
} else {
sdkp->write_prot = ((data.device_specific & 0x80) != 0);
set_disk_ro(sdkp->disk, sdkp->write_prot);
- printk(KERN_NOTICE "%s: Write Protect is %s\n", diskname,
- sdkp->write_prot ? "on" : "off");
- printk(KERN_DEBUG "%s: Mode Sense: %02x %02x %02x %02x\n",
- diskname, buffer[0], buffer[1], buffer[2], buffer[3]);
+ sd_printk(KERN_NOTICE, sdkp, "Write Protect is %s\n",
+ sdkp->write_prot ? "on" : "off");
+ sd_printk(KERN_DEBUG, sdkp,
+ "Mode Sense: %02x %02x %02x %02x\n",
+ buffer[0], buffer[1], buffer[2], buffer[3]);
}
}
/*
* sd_read_cache_type - called only from sd_revalidate_disk()
- * called with buffer of length 512
+ * called with buffer of length SD_BUF_SIZE
*/
static void
-sd_read_cache_type(struct scsi_disk *sdkp, char *diskname,
- unsigned char *buffer)
+sd_read_cache_type(struct scsi_disk *sdkp, unsigned char *buffer)
{
int len = 0, res;
struct scsi_device *sdp = sdkp->device;
if (!scsi_status_is_good(res))
goto bad_sense;
+ if (!data.header_length) {
+ modepage = 6;
+ sd_printk(KERN_ERR, sdkp, "Missing header in MODE_SENSE response\n");
+ }
+
/* that went OK, now ask for the proper length */
len = data.length;
/* Take headers and block descriptors into account */
len += data.header_length + data.block_descriptor_length;
+ if (len > SD_BUF_SIZE)
+ goto bad_sense;
/* Get the data */
res = sd_do_mode_sense(sdp, dbd, modepage, buffer, len, &data, &sshdr);
if (scsi_status_is_good(res)) {
- const char *types[] = {
- "write through", "none", "write back",
- "write back, no read (daft)"
- };
- int ct = 0;
int offset = data.header_length + data.block_descriptor_length;
+ if (offset >= SD_BUF_SIZE - 2) {
+ sd_printk(KERN_ERR, sdkp, "Malformed MODE SENSE response\n");
+ goto defaults;
+ }
+
if ((buffer[offset] & 0x3f) != modepage) {
- printk(KERN_ERR "%s: got wrong page\n", diskname);
+ sd_printk(KERN_ERR, sdkp, "Got wrong page\n");
goto defaults;
}
sdkp->RCD = 0;
}
- ct = sdkp->RCD + 2*sdkp->WCE;
+ sdkp->DPOFUA = (data.device_specific & 0x10) != 0;
+ if (sdkp->DPOFUA && !sdkp->device->use_10_for_rw) {
+ sd_printk(KERN_NOTICE, sdkp,
+ "Uses READ/WRITE(6), disabling FUA\n");
+ sdkp->DPOFUA = 0;
+ }
- printk(KERN_NOTICE "SCSI device %s: drive cache: %s\n",
- diskname, types[ct]);
+ sd_printk(KERN_NOTICE, sdkp,
+ "Write cache: %s, read cache: %s, %s\n",
+ sdkp->WCE ? "enabled" : "disabled",
+ sdkp->RCD ? "disabled" : "enabled",
+ sdkp->DPOFUA ? "supports DPO and FUA"
+ : "doesn't support DPO or FUA");
return;
}
if (scsi_sense_valid(&sshdr) &&
sshdr.sense_key == ILLEGAL_REQUEST &&
sshdr.asc == 0x24 && sshdr.ascq == 0x0)
- printk(KERN_NOTICE "%s: cache data unavailable\n",
- diskname); /* Invalid field in CDB */
+ /* Invalid field in CDB */
+ sd_printk(KERN_NOTICE, sdkp, "Cache data unavailable\n");
else
- printk(KERN_ERR "%s: asking for cache data failed\n",
- diskname);
+ sd_printk(KERN_ERR, sdkp, "Asking for cache data failed\n");
defaults:
- printk(KERN_ERR "%s: assuming drive cache: write through\n",
- diskname);
+ sd_printk(KERN_ERR, sdkp, "Assuming drive cache: write through\n");
sdkp->WCE = 0;
sdkp->RCD = 0;
+ sdkp->DPOFUA = 0;
+}
+
+/*
+ * The ATO bit indicates whether the DIF application tag is available
+ * for use by the operating system.
+ */
+void sd_read_app_tag_own(struct scsi_disk *sdkp, unsigned char *buffer)
+{
+ int res, offset;
+ struct scsi_device *sdp = sdkp->device;
+ struct scsi_mode_data data;
+ struct scsi_sense_hdr sshdr;
+
+ if (sdp->type != TYPE_DISK)
+ return;
+
+ if (sdkp->protection_type == 0)
+ return;
+
+ res = scsi_mode_sense(sdp, 1, 0x0a, buffer, 36, SD_TIMEOUT,
+ SD_MAX_RETRIES, &data, &sshdr);
+
+ if (!scsi_status_is_good(res) || !data.header_length ||
+ data.length < 6) {
+ sd_printk(KERN_WARNING, sdkp,
+ "getting Control mode page failed, assume no ATO\n");
+
+ if (scsi_sense_valid(&sshdr))
+ sd_print_sense_hdr(sdkp, &sshdr);
+
+ return;
+ }
+
+ offset = data.header_length + data.block_descriptor_length;
+
+ if ((buffer[offset] & 0x3f) != 0x0a) {
+ sd_printk(KERN_ERR, sdkp, "ATO Got wrong page\n");
+ return;
+ }
+
+ if ((buffer[offset + 5] & 0x80) == 0)
+ return;
+
+ sdkp->ATO = 1;
+
+ return;
}
/**
struct scsi_disk *sdkp = scsi_disk(disk);
struct scsi_device *sdp = sdkp->device;
unsigned char *buffer;
+ unsigned ordered;
- SCSI_LOG_HLQUEUE(3, printk("sd_revalidate_disk: disk=%s\n", disk->disk_name));
+ SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp,
+ "sd_revalidate_disk\n"));
/*
* If the device is offline, don't try and read capacity or any
if (!scsi_device_online(sdp))
goto out;
- buffer = kmalloc(512, GFP_KERNEL | __GFP_DMA);
+ buffer = kmalloc(SD_BUF_SIZE, GFP_KERNEL);
if (!buffer) {
- printk(KERN_WARNING "(sd_revalidate_disk:) Memory allocation "
- "failure.\n");
+ sd_printk(KERN_WARNING, sdkp, "sd_revalidate_disk: Memory "
+ "allocation failure.\n");
goto out;
}
sdkp->write_prot = 0;
sdkp->WCE = 0;
sdkp->RCD = 0;
+ sdkp->ATO = 0;
- sd_spinup_disk(sdkp, disk->disk_name);
+ sd_spinup_disk(sdkp);
/*
* Without media there is no reason to ask; moreover, some devices
* react badly if we do.
*/
if (sdkp->media_present) {
- sd_read_capacity(sdkp, disk->disk_name, buffer);
- if (sdp->removable)
- sd_read_write_protect_flag(sdkp, disk->disk_name,
- buffer);
- sd_read_cache_type(sdkp, disk->disk_name, buffer);
+ sd_read_capacity(sdkp, buffer);
+ sd_read_write_protect_flag(sdkp, buffer);
+ sd_read_cache_type(sdkp, buffer);
+ sd_read_app_tag_own(sdkp, buffer);
}
-
+
+ /*
+ * We now have all cache related info, determine how we deal
+ * with ordered requests. Note that as the current SCSI
+ * dispatch function can alter request order, we cannot use
+ * QUEUE_ORDERED_TAG_* even when ordered tag is supported.
+ */
+ if (sdkp->WCE)
+ ordered = sdkp->DPOFUA
+ ? QUEUE_ORDERED_DRAIN_FUA : QUEUE_ORDERED_DRAIN_FLUSH;
+ else
+ ordered = QUEUE_ORDERED_DRAIN;
+
+ blk_queue_ordered(sdkp->disk->queue, ordered, sd_prepare_flush);
+
set_capacity(disk, sdkp->capacity);
kfree(buffer);
}
/**
+ * sd_format_disk_name - format disk name
+ * @prefix: name prefix - ie. "sd" for SCSI disks
+ * @index: index of the disk to format name for
+ * @buf: output buffer
+ * @buflen: length of the output buffer
+ *
+ * SCSI disk names starts at sda. The 26th device is sdz and the
+ * 27th is sdaa. The last one for two lettered suffix is sdzz
+ * which is followed by sdaaa.
+ *
+ * This is basically 26 base counting with one extra 'nil' entry
+ * at the beggining from the second digit on and can be
+ * determined using similar method as 26 base conversion with the
+ * index shifted -1 after each digit is computed.
+ *
+ * CONTEXT:
+ * Don't care.
+ *
+ * RETURNS:
+ * 0 on success, -errno on failure.
+ */
+static int sd_format_disk_name(char *prefix, int index, char *buf, int buflen)
+{
+ const int base = 'z' - 'a' + 1;
+ char *begin = buf + strlen(prefix);
+ char *end = buf + buflen;
+ char *p;
+ int unit;
+
+ p = end - 1;
+ *p = '\0';
+ unit = base;
+ do {
+ if (p == begin)
+ return -EINVAL;
+ *--p = 'a' + (index % unit);
+ index = (index / unit) - 1;
+ } while (index >= 0);
+
+ memmove(begin, p, end - p);
+ memcpy(buf, prefix, strlen(prefix));
+
+ return 0;
+}
+
+/**
* sd_probe - called during driver initialization and whenever a
* new scsi device is attached to the system. It is called once
* for each scsi device (not just disks) present.
if (sdp->type != TYPE_DISK && sdp->type != TYPE_MOD && sdp->type != TYPE_RBC)
goto out;
- SCSI_LOG_HLQUEUE(3, printk("sd_attach: scsi device: <%d,%d,%d,%d>\n",
- sdp->host->host_no, sdp->channel, sdp->id, sdp->lun));
+ SCSI_LOG_HLQUEUE(3, sdev_printk(KERN_INFO, sdp,
+ "sd_attach\n"));
error = -ENOMEM;
- sdkp = kmalloc(sizeof(*sdkp), GFP_KERNEL);
+ sdkp = kzalloc(sizeof(*sdkp), GFP_KERNEL);
if (!sdkp)
goto out;
- memset (sdkp, 0, sizeof(*sdkp));
- kref_init(&sdkp->kref);
-
- gd = alloc_disk(16);
+ gd = alloc_disk(SD_MINORS);
if (!gd)
goto out_free;
- if (!idr_pre_get(&sd_index_idr, GFP_KERNEL))
- goto out_put;
+ do {
+ if (!ida_pre_get(&sd_index_ida, GFP_KERNEL))
+ goto out_put;
- spin_lock(&sd_index_lock);
- error = idr_get_new(&sd_index_idr, NULL, &index);
- spin_unlock(&sd_index_lock);
+ error = ida_get_new(&sd_index_ida, &index);
+ } while (error == -EAGAIN);
- if (index >= SD_MAX_DISKS)
- error = -EBUSY;
if (error)
goto out_put;
+ error = sd_format_disk_name("sd", index, gd->disk_name, DISK_NAME_LEN);
+ if (error)
+ goto out_free_index;
+
sdkp->device = sdp;
sdkp->driver = &sd_template;
sdkp->disk = gd;
sdkp->index = index;
sdkp->openers = 0;
+ sdkp->previous_state = 1;
- if (!sdp->timeout) {
+ if (!sdp->request_queue->rq_timeout) {
if (sdp->type != TYPE_MOD)
- sdp->timeout = SD_TIMEOUT;
+ blk_queue_rq_timeout(sdp->request_queue, SD_TIMEOUT);
else
- sdp->timeout = SD_MOD_TIMEOUT;
+ blk_queue_rq_timeout(sdp->request_queue,
+ SD_MOD_TIMEOUT);
}
- gd->major = sd_major((index & 0xf0) >> 4);
- gd->first_minor = ((index & 0xf) << 4) | (index & 0xfff00);
- gd->minors = 16;
- gd->fops = &sd_fops;
+ device_initialize(&sdkp->dev);
+ sdkp->dev.parent = &sdp->sdev_gendev;
+ sdkp->dev.class = &sd_disk_class;
+ strncpy(sdkp->dev.bus_id, sdp->sdev_gendev.bus_id, BUS_ID_SIZE);
- if (index < 26) {
- sprintf(gd->disk_name, "sd%c", 'a' + index % 26);
- } else if (index < (26 + 1) * 26) {
- sprintf(gd->disk_name, "sd%c%c",
- 'a' + index / 26 - 1,'a' + index % 26);
- } else {
- const unsigned int m1 = (index / 26 - 1) / 26 - 1;
- const unsigned int m2 = (index / 26 - 1) % 26;
- const unsigned int m3 = index % 26;
- sprintf(gd->disk_name, "sd%c%c%c",
- 'a' + m1, 'a' + m2, 'a' + m3);
- }
+ if (device_add(&sdkp->dev))
+ goto out_free_index;
- strcpy(gd->devfs_name, sdp->devfs_name);
+ get_device(&sdp->sdev_gendev);
+ if (index < SD_MAX_DISKS) {
+ gd->major = sd_major((index & 0xf0) >> 4);
+ gd->first_minor = ((index & 0xf) << 4) | (index & 0xfff00);
+ gd->minors = SD_MINORS;
+ }
+ gd->fops = &sd_fops;
gd->private_data = &sdkp->driver;
+ gd->queue = sdkp->device->request_queue;
sd_revalidate_disk(gd);
+ blk_queue_prep_rq(sdp->request_queue, sd_prep_fn);
+
gd->driverfs_dev = &sdp->sdev_gendev;
- gd->flags = GENHD_FL_DRIVERFS;
+ gd->flags = GENHD_FL_EXT_DEVT | GENHD_FL_DRIVERFS;
if (sdp->removable)
gd->flags |= GENHD_FL_REMOVABLE;
- gd->queue = sdkp->device->request_queue;
dev_set_drvdata(dev, sdkp);
add_disk(gd);
+ sd_dif_config_host(sdkp);
- printk(KERN_NOTICE "Attached scsi %sdisk %s at scsi%d, channel %d, "
- "id %d, lun %d\n", sdp->removable ? "removable " : "",
- gd->disk_name, sdp->host->host_no, sdp->channel,
- sdp->id, sdp->lun);
+ sd_printk(KERN_NOTICE, sdkp, "Attached SCSI %sdisk\n",
+ sdp->removable ? "removable " : "");
return 0;
-out_put:
+ out_free_index:
+ ida_remove(&sd_index_ida, index);
+ out_put:
put_disk(gd);
-out_free:
+ out_free:
kfree(sdkp);
-out:
+ out:
return error;
}
{
struct scsi_disk *sdkp = dev_get_drvdata(dev);
+ device_del(&sdkp->dev);
del_gendisk(sdkp->disk);
sd_shutdown(dev);
- down(&sd_ref_sem);
- kref_put(&sdkp->kref, scsi_disk_release);
- up(&sd_ref_sem);
+
+ mutex_lock(&sd_ref_mutex);
+ dev_set_drvdata(dev, NULL);
+ put_device(&sdkp->dev);
+ mutex_unlock(&sd_ref_mutex);
return 0;
}
/**
* scsi_disk_release - Called to free the scsi_disk structure
- * @kref: pointer to embedded kref
+ * @dev: pointer to embedded class device
*
- * sd_ref_sem must be held entering this routine. Because it is
+ * sd_ref_mutex must be held entering this routine. Because it is
* called on last put, you should always use the scsi_disk_get()
* scsi_disk_put() helpers which manipulate the semaphore directly
- * and never do a direct kref_put().
+ * and never do a direct put_device.
**/
-static void scsi_disk_release(struct kref *kref)
+static void scsi_disk_release(struct device *dev)
{
- struct scsi_disk *sdkp = to_scsi_disk(kref);
+ struct scsi_disk *sdkp = to_scsi_disk(dev);
struct gendisk *disk = sdkp->disk;
- spin_lock(&sd_index_lock);
- idr_remove(&sd_index_idr, sdkp->index);
- spin_unlock(&sd_index_lock);
+ ida_remove(&sd_index_ida, sdkp->index);
disk->private_data = NULL;
-
put_disk(disk);
+ put_device(&sdkp->device->sdev_gendev);
kfree(sdkp);
}
+static int sd_start_stop_device(struct scsi_disk *sdkp, int start)
+{
+ unsigned char cmd[6] = { START_STOP }; /* START_VALID */
+ struct scsi_sense_hdr sshdr;
+ struct scsi_device *sdp = sdkp->device;
+ int res;
+
+ if (start)
+ cmd[4] |= 1; /* START */
+
+ if (sdp->start_stop_pwr_cond)
+ cmd[4] |= start ? 1 << 4 : 3 << 4; /* Active or Standby */
+
+ if (!scsi_device_online(sdp))
+ return -ENODEV;
+
+ res = scsi_execute_req(sdp, cmd, DMA_NONE, NULL, 0, &sshdr,
+ SD_TIMEOUT, SD_MAX_RETRIES);
+ if (res) {
+ sd_printk(KERN_WARNING, sdkp, "START_STOP FAILED\n");
+ sd_print_result(sdkp, res);
+ if (driver_byte(res) & DRIVER_SENSE)
+ sd_print_sense_hdr(sdkp, &sshdr);
+ }
+
+ return res;
+}
+
/*
* Send a SYNCHRONIZE CACHE instruction down to the device through
* the normal SCSI command structure. Wait for the command to
*/
static void sd_shutdown(struct device *dev)
{
- struct scsi_device *sdp = to_scsi_device(dev);
- struct scsi_disk *sdkp = dev_get_drvdata(dev);
+ struct scsi_disk *sdkp = scsi_disk_get_from_dev(dev);
if (!sdkp)
return; /* this can happen */
- if (!sdkp->WCE)
- return;
+ if (sdkp->WCE) {
+ sd_printk(KERN_NOTICE, sdkp, "Synchronizing SCSI cache\n");
+ sd_sync_cache(sdkp);
+ }
+
+ if (system_state != SYSTEM_RESTART && sdkp->device->manage_start_stop) {
+ sd_printk(KERN_NOTICE, sdkp, "Stopping disk\n");
+ sd_start_stop_device(sdkp, 0);
+ }
- printk(KERN_NOTICE "Synchronizing SCSI cache for disk %s: \n",
- sdkp->disk->disk_name);
- sd_sync_cache(sdp);
-}
+ scsi_disk_put(sdkp);
+}
+
+static int sd_suspend(struct device *dev, pm_message_t mesg)
+{
+ struct scsi_disk *sdkp = scsi_disk_get_from_dev(dev);
+ int ret = 0;
+
+ if (!sdkp)
+ return 0; /* this can happen */
+
+ if (sdkp->WCE) {
+ sd_printk(KERN_NOTICE, sdkp, "Synchronizing SCSI cache\n");
+ ret = sd_sync_cache(sdkp);
+ if (ret)
+ goto done;
+ }
+
+ if ((mesg.event & PM_EVENT_SLEEP) && sdkp->device->manage_start_stop) {
+ sd_printk(KERN_NOTICE, sdkp, "Stopping disk\n");
+ ret = sd_start_stop_device(sdkp, 0);
+ }
+
+done:
+ scsi_disk_put(sdkp);
+ return ret;
+}
+
+static int sd_resume(struct device *dev)
+{
+ struct scsi_disk *sdkp = scsi_disk_get_from_dev(dev);
+ int ret = 0;
+
+ if (!sdkp->device->manage_start_stop)
+ goto done;
+
+ sd_printk(KERN_NOTICE, sdkp, "Starting disk\n");
+ ret = sd_start_stop_device(sdkp, 1);
+
+done:
+ scsi_disk_put(sdkp);
+ return ret;
+}
/**
* init_sd - entry point for this driver (both when built in or when
**/
static int __init init_sd(void)
{
- int majors = 0, i;
+ int majors = 0, i, err;
SCSI_LOG_HLQUEUE(3, printk("init_sd: sd driver entry point\n"));
if (!majors)
return -ENODEV;
- return scsi_register_driver(&sd_template.gendrv);
+ err = class_register(&sd_disk_class);
+ if (err)
+ goto err_out;
+
+ err = scsi_register_driver(&sd_template.gendrv);
+ if (err)
+ goto err_out_class;
+
+ return 0;
+
+err_out_class:
+ class_unregister(&sd_disk_class);
+err_out:
+ for (i = 0; i < SD_MAJORS; i++)
+ unregister_blkdev(sd_major(i), "sd");
+ return err;
}
/**
SCSI_LOG_HLQUEUE(3, printk("exit_sd: exiting sd driver\n"));
scsi_unregister_driver(&sd_template.gendrv);
+ class_unregister(&sd_disk_class);
+
for (i = 0; i < SD_MAJORS; i++)
unregister_blkdev(sd_major(i), "sd");
}
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Eric Youngdale");
-MODULE_DESCRIPTION("SCSI disk (sd) driver");
-
module_init(init_sd);
module_exit(exit_sd);
+
+static void sd_print_sense_hdr(struct scsi_disk *sdkp,
+ struct scsi_sense_hdr *sshdr)
+{
+ sd_printk(KERN_INFO, sdkp, "");
+ scsi_show_sense_hdr(sshdr);
+ sd_printk(KERN_INFO, sdkp, "");
+ scsi_show_extd_sense(sshdr->asc, sshdr->ascq);
+}
+
+static void sd_print_result(struct scsi_disk *sdkp, int result)
+{
+ sd_printk(KERN_INFO, sdkp, "");
+ scsi_show_result(result);
+}
+
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff