#include <linux/workqueue.h>
#include <linux/blkdev.h>
#include <linux/mutex.h>
+#include <linux/sysfs.h>
#include <scsi/scsi.h>
#include "scsi_priv.h"
#include <scsi/scsi_device.h>
#define DV_RETRIES 3 /* should only need at most
* two cc/ua clears */
+/* Our blacklist flags */
+enum {
+ SPI_BLIST_NOIUS = 0x1,
+};
+
+/* blacklist table, modelled on scsi_devinfo.c */
+static struct {
+ char *vendor;
+ char *model;
+ unsigned flags;
+} spi_static_device_list[] __initdata = {
+ {"HP", "Ultrium 3-SCSI", SPI_BLIST_NOIUS },
+ {"IBM", "ULTRIUM-TD3", SPI_BLIST_NOIUS },
+ {NULL, NULL, 0}
+};
+
/* Private data accessors (keep these out of the header file) */
#define spi_dv_in_progress(x) (((struct spi_transport_attrs *)&(x)->starget_data)->dv_in_progress)
#define spi_dv_mutex(x) (((struct spi_transport_attrs *)&(x)->starget_data)->dv_mutex)
for(i = 0; i < DV_RETRIES; i++) {
result = scsi_execute(sdev, cmd, dir, buffer, bufflen,
sense, DV_TIMEOUT, /* retries */ 1,
- REQ_FAILFAST);
- if (result & DRIVER_SENSE) {
+ REQ_FAILFAST_DEV |
+ REQ_FAILFAST_TRANSPORT |
+ REQ_FAILFAST_DRIVER,
+ NULL);
+ if (driver_byte(result) & DRIVER_SENSE) {
struct scsi_sense_hdr sshdr_tmp;
if (!sshdr)
sshdr = &sshdr_tmp;
{
struct scsi_device *sdev = to_scsi_device(dev);
struct scsi_target *starget = sdev->sdev_target;
+ unsigned bflags = scsi_get_device_flags_keyed(sdev, &sdev->inquiry[8],
+ &sdev->inquiry[16],
+ SCSI_DEVINFO_SPI);
/* Populate the target capability fields with the values
* gleaned from the device inquiry */
spi_support_dt(starget) = scsi_device_dt(sdev);
spi_support_dt_only(starget) = scsi_device_dt_only(sdev);
spi_support_ius(starget) = scsi_device_ius(sdev);
+ if (bflags & SPI_BLIST_NOIUS) {
+ dev_info(dev, "Information Units disabled by blacklist\n");
+ spi_support_ius(starget) = 0;
+ }
spi_support_qas(starget) = scsi_device_qas(sdev);
return 0;
spi_width(starget) = 0; /* narrow */
spi_max_width(starget) = 1;
spi_iu(starget) = 0; /* no IU */
+ spi_max_iu(starget) = 1;
spi_dt(starget) = 0; /* ST */
spi_qas(starget) = 0;
+ spi_max_qas(starget) = 1;
spi_wr_flow(starget) = 0;
spi_rd_strm(starget) = 0;
spi_rti(starget) = 0;
/* The Parallel SCSI Tranport Attributes: */
spi_transport_max_attr(offset, "%d\n");
spi_transport_max_attr(width, "%d\n");
-spi_transport_rd_attr(iu, "%d\n");
+spi_transport_max_attr(iu, "%d\n");
spi_transport_rd_attr(dt, "%d\n");
-spi_transport_rd_attr(qas, "%d\n");
+spi_transport_max_attr(qas, "%d\n");
spi_transport_rd_attr(wr_flow, "%d\n");
spi_transport_rd_attr(rd_strm, "%d\n");
spi_transport_rd_attr(rti, "%d\n");
spi_transport_rd_attr(pcomp_en, "%d\n");
spi_transport_rd_attr(hold_mcs, "%d\n");
-/* we only care about the first child device so we return 1 */
+/* we only care about the first child device that's a real SCSI device
+ * so we return 1 to terminate the iteration when we find it */
static int child_iter(struct device *dev, void *data)
{
- struct scsi_device *sdev = to_scsi_device(dev);
+ if (!scsi_is_sdev_device(dev))
+ return 0;
- spi_dv_device(sdev);
+ spi_dv_device(to_scsi_device(dev));
return 1;
}
return;
}
- if (!scsi_device_wide(sdev)) {
+ if (!spi_support_wide(starget)) {
spi_max_width(starget) = 0;
max_width = 0;
}
return;
/* device can't handle synchronous */
- if (!scsi_device_sync(sdev) && !scsi_device_dt(sdev))
+ if (!spi_support_sync(starget) && !spi_support_dt(starget))
return;
/* len == -1 is the signal that we need to ascertain the
/* try QAS requests; this should be harmless to set if the
* target supports it */
- if (scsi_device_qas(sdev)) {
+ if (spi_support_qas(starget) && spi_max_qas(starget)) {
DV_SET(qas, 1);
} else {
DV_SET(qas, 0);
}
- if (scsi_device_ius(sdev) && min_period < 9) {
+ if (spi_support_ius(starget) && spi_max_iu(starget) &&
+ min_period < 9) {
/* This u320 (or u640). Set IU transfers */
DV_SET(iu, 1);
/* Then set the optional parameters */
i->f->get_signalling(shost);
if (spi_signalling(shost) == SPI_SIGNAL_SE ||
spi_signalling(shost) == SPI_SIGNAL_HVD ||
- !scsi_device_dt(sdev)) {
+ !spi_support_dt(starget)) {
DV_SET(dt, 0);
} else {
DV_SET(dt, 1);
else if (attr == &dev_attr_iu.attr &&
spi_support_ius(starget))
return TARGET_ATTRIBUTE_HELPER(iu);
+ else if (attr == &dev_attr_max_iu.attr &&
+ spi_support_ius(starget))
+ return TARGET_ATTRIBUTE_HELPER(iu);
else if (attr == &dev_attr_dt.attr &&
spi_support_dt(starget))
return TARGET_ATTRIBUTE_HELPER(dt);
else if (attr == &dev_attr_qas.attr &&
spi_support_qas(starget))
return TARGET_ATTRIBUTE_HELPER(qas);
+ else if (attr == &dev_attr_max_qas.attr &&
+ spi_support_qas(starget))
+ return TARGET_ATTRIBUTE_HELPER(qas);
else if (attr == &dev_attr_wr_flow.attr &&
spi_support_ius(starget))
return TARGET_ATTRIBUTE_HELPER(wr_flow);
&dev_attr_width.attr,
&dev_attr_max_width.attr,
&dev_attr_iu.attr,
+ &dev_attr_max_iu.attr,
&dev_attr_dt.attr,
&dev_attr_qas.attr,
+ &dev_attr_max_qas.attr,
&dev_attr_wr_flow.attr,
&dev_attr_rd_strm.attr,
&dev_attr_rti.attr,
static __init int spi_transport_init(void)
{
- int error = transport_class_register(&spi_transport_class);
+ int error = scsi_dev_info_add_list(SCSI_DEVINFO_SPI,
+ "SCSI Parallel Transport Class");
+ if (!error) {
+ int i;
+
+ for (i = 0; spi_static_device_list[i].vendor; i++)
+ scsi_dev_info_list_add_keyed(1, /* compatible */
+ spi_static_device_list[i].vendor,
+ spi_static_device_list[i].model,
+ NULL,
+ spi_static_device_list[i].flags,
+ SCSI_DEVINFO_SPI);
+ }
+
+ error = transport_class_register(&spi_transport_class);
if (error)
return error;
error = anon_transport_class_register(&spi_device_class);
transport_class_unregister(&spi_transport_class);
anon_transport_class_unregister(&spi_device_class);
transport_class_unregister(&spi_host_class);
+ scsi_dev_info_remove_list(SCSI_DEVINFO_SPI);
}
MODULE_AUTHOR("Martin Hicks");
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff