#include <linux/delay.h>
#include <linux/kthread.h>
#include <linux/spinlock.h>
+#include <linux/async.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
"REPORT LUNS maximum number of LUNS received (should be"
" between 1 and 16384)");
-static unsigned int scsi_inq_timeout = SCSI_TIMEOUT/HZ+3;
+static unsigned int scsi_inq_timeout = SCSI_TIMEOUT/HZ + 18;
module_param_named(inq_timeout, scsi_inq_timeout, uint, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(inq_timeout,
"Timeout (in seconds) waiting for devices to answer INQUIRY."
- " Default is 5. Some non-compliant devices need more.");
+ " Default is 20. Some devices may need more; most need less.");
/* This lock protects only this list */
static DEFINE_SPINLOCK(async_scan_lock);
scsi_cmd[4] = 0x2a; /* size */
scsi_cmd[5] = 0;
scsi_execute_req(sdev, scsi_cmd, DMA_FROM_DEVICE, result, 0x2a, NULL,
- SCSI_TIMEOUT, 3);
+ SCSI_TIMEOUT, 3, NULL);
}
/**
sdev->model = scsi_null_device_strs;
sdev->rev = scsi_null_device_strs;
sdev->host = shost;
+ sdev->queue_ramp_up_period = SCSI_DEFAULT_RAMP_UP_PERIOD;
sdev->id = starget->id;
sdev->lun = lun;
sdev->channel = starget->channel;
return sdev;
out_device_destroy:
+ scsi_device_set_state(sdev, SDEV_DEL);
transport_destroy_device(&sdev->sdev_gendev);
+ put_device(&sdev->sdev_dev);
put_device(&sdev->sdev_gendev);
out:
if (display_failure_msg)
device_initialize(dev);
starget->reap_ref = 1;
dev->parent = get_device(parent);
- sprintf(dev->bus_id, "target%d:%d:%d",
- shost->host_no, channel, id);
+ dev_set_name(dev, "target%d:%d:%d", shost->host_no, channel, id);
#ifndef CONFIG_SYSFS_DEPRECATED
dev->bus = &scsi_bus_type;
#endif
dev->type = &scsi_target_type;
starget->id = id;
starget->channel = channel;
+ starget->can_queue = 0;
INIT_LIST_HEAD(&starget->siblings);
INIT_LIST_HEAD(&starget->devices);
starget->state = STARGET_CREATED;
starget->scsi_level = SCSI_2;
+ starget->max_target_blocked = SCSI_DEFAULT_TARGET_BLOCKED;
retry:
spin_lock_irqsave(shost->host_lock, flags);
/* Each pass gets up to three chances to ignore Unit Attention */
for (count = 0; count < 3; ++count) {
+ int resid;
+
memset(scsi_cmd, 0, 6);
scsi_cmd[0] = INQUIRY;
scsi_cmd[4] = (unsigned char) try_inquiry_len;
result = scsi_execute_req(sdev, scsi_cmd, DMA_FROM_DEVICE,
inq_result, try_inquiry_len, &sshdr,
- HZ / 2 + HZ * scsi_inq_timeout, 3);
+ HZ / 2 + HZ * scsi_inq_timeout, 3,
+ &resid);
SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO "scsi scan: INQUIRY %s "
"with code 0x%x\n",
(sshdr.ascq == 0))
continue;
}
+ } else {
+ /*
+ * if nothing was transferred, we try
+ * again. It's a workaround for some USB
+ * devices.
+ */
+ if (resid == try_inquiry_len)
+ continue;
}
break;
}
static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result,
int *bflags, int async)
{
+ int ret;
+
/*
* XXX do not save the inquiry, since it can change underneath us,
* save just vendor/model/rev.
case TYPE_ENCLOSURE:
case TYPE_COMM:
case TYPE_RAID:
+ case TYPE_OSD:
sdev->writeable = 1;
break;
case TYPE_ROM:
/* set the device running here so that slave configure
* may do I/O */
- scsi_device_set_state(sdev, SDEV_RUNNING);
+ ret = scsi_device_set_state(sdev, SDEV_RUNNING);
+ if (ret) {
+ ret = scsi_device_set_state(sdev, SDEV_BLOCK);
+
+ if (ret) {
+ sdev_printk(KERN_ERR, sdev,
+ "in wrong state %s to complete scan\n",
+ scsi_device_state_name(sdev->sdev_state));
+ return SCSI_SCAN_NO_RESPONSE;
+ }
+ }
if (*bflags & BLIST_MS_192_BYTES_FOR_3F)
sdev->use_192_bytes_for_3f = 1;
transport_configure_device(&sdev->sdev_gendev);
if (sdev->host->hostt->slave_configure) {
- int ret = sdev->host->hostt->slave_configure(sdev);
+ ret = sdev->host->hostt->slave_configure(sdev);
if (ret) {
/*
* if LLDD reports slave not present, don't clutter
}
}
+ sdev->max_queue_depth = sdev->queue_depth;
+
/*
* Ok, the device is now all set up, we can
* register it and tell the rest of the kernel
return SCSI_SCAN_LUN_PRESENT;
}
-static inline void scsi_destroy_sdev(struct scsi_device *sdev)
-{
- scsi_device_set_state(sdev, SDEV_DEL);
- if (sdev->host->hostt->slave_destroy)
- sdev->host->hostt->slave_destroy(sdev);
- transport_destroy_device(&sdev->sdev_gendev);
- put_device(&sdev->sdev_gendev);
-}
-
#ifdef CONFIG_SCSI_LOGGING
/**
* scsi_inq_str - print INQUIRY data from min to max index, strip trailing whitespace
if (rescan || !scsi_device_created(sdev)) {
SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO
"scsi scan: device exists on %s\n",
- sdev->sdev_gendev.bus_id));
+ dev_name(&sdev->sdev_gendev)));
if (sdevp)
*sdevp = sdev;
else
}
}
} else
- scsi_destroy_sdev(sdev);
+ __scsi_remove_device(sdev);
out:
return res;
}
struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO "scsi scan: Sequential scan of"
- "%s\n", starget->dev.bus_id));
+ "%s\n", dev_name(&starget->dev)));
max_dev_lun = min(max_scsi_luns, shost->max_lun);
/*
result = scsi_execute_req(sdev, scsi_cmd, DMA_FROM_DEVICE,
lun_data, length, &sshdr,
- SCSI_TIMEOUT + 4 * HZ, 3);
+ SCSI_TIMEOUT + 4 * HZ, 3, NULL);
SCSI_LOG_SCAN_BUS(3, printk (KERN_INFO "scsi scan: REPORT LUNS"
" %s (try %d) result 0x%x\n", result
/*
* the sdev we used didn't appear in the report luns scan
*/
- scsi_destroy_sdev(sdev);
+ __scsi_remove_device(sdev);
return ret;
}
shost_for_each_device(sdev, shost) {
if (!scsi_host_scan_allowed(shost) ||
scsi_sysfs_add_sdev(sdev) != 0)
- scsi_destroy_sdev(sdev);
+ __scsi_remove_device(sdev);
}
}
{
BUG_ON(sdev->id != sdev->host->this_id);
- scsi_destroy_sdev(sdev);
+ __scsi_remove_device(sdev);
}
EXPORT_SYMBOL(scsi_free_host_dev);
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff