/* Protect sht->present and sht->proc_dir */
static DEFINE_MUTEX(global_host_template_mutex);
+/**
+ * proc_scsi_read - handle read from /proc by calling host's proc_info() command
+ * @buffer: passed to proc_info
+ * @start: passed to proc_info
+ * @offset: passed to proc_info
+ * @length: passed to proc_info
+ * @eof: returns whether length read was less than requested
+ * @data: pointer to a &struct Scsi_Host
+ */
+
static int proc_scsi_read(char *buffer, char **start, off_t offset,
int length, int *eof, void *data)
{
return n;
}
+/**
+ * proc_scsi_write_proc - Handle write to /proc by calling host's proc_info()
+ * @file: not used
+ * @buf: source of data to write.
+ * @count: number of bytes (at most PROC_BLOCK_SIZE) to write.
+ * @data: pointer to &struct Scsi_Host
+ */
static int proc_scsi_write_proc(struct file *file, const char __user *buf,
unsigned long count, void *data)
{
return ret;
}
+/**
+ * scsi_proc_hostdir_add - Create directory in /proc for a scsi host
+ * @sht: owner of this directory
+ *
+ * Sets sht->proc_dir to the new directory.
+ */
+
void scsi_proc_hostdir_add(struct scsi_host_template *sht)
{
if (!sht->proc_info)
sht->proc_dir = proc_mkdir(sht->proc_name, proc_scsi);
if (!sht->proc_dir)
printk(KERN_ERR "%s: proc_mkdir failed for %s\n",
- __FUNCTION__, sht->proc_name);
- else
- sht->proc_dir->owner = sht->module;
+ __func__, sht->proc_name);
}
mutex_unlock(&global_host_template_mutex);
}
+/**
+ * scsi_proc_hostdir_rm - remove directory in /proc for a scsi host
+ * @sht: owner of directory
+ */
void scsi_proc_hostdir_rm(struct scsi_host_template *sht)
{
if (!sht->proc_info)
mutex_unlock(&global_host_template_mutex);
}
+
+/**
+ * scsi_proc_host_add - Add entry for this host to appropriate /proc dir
+ * @shost: host to add
+ */
void scsi_proc_host_add(struct Scsi_Host *shost)
{
struct scsi_host_template *sht = shost->hostt;
sht->proc_dir, proc_scsi_read, shost);
if (!p) {
printk(KERN_ERR "%s: Failed to register host %d in"
- "%s\n", __FUNCTION__, shost->host_no,
+ "%s\n", __func__, shost->host_no,
sht->proc_name);
return;
}
p->write_proc = proc_scsi_write_proc;
- p->owner = sht->module;
}
+/**
+ * scsi_proc_host_rm - remove this host's entry from /proc
+ * @shost: which host
+ */
void scsi_proc_host_rm(struct Scsi_Host *shost)
{
char name[10];
sprintf(name,"%d", shost->host_no);
remove_proc_entry(name, shost->hostt->proc_dir);
}
-
+/**
+ * proc_print_scsidevice - return data about this host
+ * @dev: A scsi device
+ * @data: &struct seq_file to output to.
+ *
+ * Description: prints Host, Channel, Id, Lun, Vendor, Model, Rev, Type,
+ * and revision.
+ */
static int proc_print_scsidevice(struct device *dev, void *data)
{
- struct scsi_device *sdev = to_scsi_device(dev);
+ struct scsi_device *sdev;
struct seq_file *s = data;
int i;
+ if (!scsi_is_sdev_device(dev))
+ goto out;
+
+ sdev = to_scsi_device(dev);
seq_printf(s,
"Host: scsi%d Channel: %02d Id: %02d Lun: %02d\n Vendor: ",
sdev->host->host_no, sdev->channel, sdev->id, sdev->lun);
seq_printf(s, "\n");
- seq_printf(s, " Type: %s ",
- sdev->type < MAX_SCSI_DEVICE_CODE ?
- scsi_device_types[(int) sdev->type] : "Unknown ");
- seq_printf(s, " ANSI"
- " SCSI revision: %02x", (sdev->scsi_level - 1) ?
- sdev->scsi_level - 1 : 1);
+ seq_printf(s, " Type: %s ", scsi_device_type(sdev->type));
+ seq_printf(s, " ANSI SCSI revision: %02x",
+ sdev->scsi_level - (sdev->scsi_level > 1));
if (sdev->scsi_level == 2)
seq_printf(s, " CCS\n");
else
seq_printf(s, "\n");
+out:
return 0;
}
+/**
+ * scsi_add_single_device - Respond to user request to probe for/add device
+ * @host: user-supplied decimal integer
+ * @channel: user-supplied decimal integer
+ * @id: user-supplied decimal integer
+ * @lun: user-supplied decimal integer
+ *
+ * Description: called by writing "scsi add-single-device" to /proc/scsi/scsi.
+ *
+ * does scsi_host_lookup() and either user_scan() if that transport
+ * type supports it, or else scsi_scan_host_selected()
+ *
+ * Note: this seems to be aimed exclusively at SCSI parallel busses.
+ */
+
static int scsi_add_single_device(uint host, uint channel, uint id, uint lun)
{
struct Scsi_Host *shost;
int error = -ENXIO;
shost = scsi_host_lookup(host);
- if (IS_ERR(shost))
- return PTR_ERR(shost);
+ if (!shost)
+ return error;
if (shost->transportt->user_scan)
error = shost->transportt->user_scan(shost, channel, id, lun);
return error;
}
+/**
+ * scsi_remove_single_device - Respond to user request to remove a device
+ * @host: user-supplied decimal integer
+ * @channel: user-supplied decimal integer
+ * @id: user-supplied decimal integer
+ * @lun: user-supplied decimal integer
+ *
+ * Description: called by writing "scsi remove-single-device" to
+ * /proc/scsi/scsi. Does a scsi_device_lookup() and scsi_remove_device()
+ */
static int scsi_remove_single_device(uint host, uint channel, uint id, uint lun)
{
struct scsi_device *sdev;
int error = -ENXIO;
shost = scsi_host_lookup(host);
- if (IS_ERR(shost))
- return PTR_ERR(shost);
+ if (!shost)
+ return error;
sdev = scsi_device_lookup(shost, channel, id, lun);
if (sdev) {
scsi_remove_device(sdev);
return error;
}
+/**
+ * proc_scsi_write - handle writes to /proc/scsi/scsi
+ * @file: not used
+ * @buf: buffer to write
+ * @length: length of buf, at most PAGE_SIZE
+ * @ppos: not used
+ *
+ * Description: this provides a legacy mechanism to add or remove devices by
+ * Host, Channel, ID, and Lun. To use,
+ * "echo 'scsi add-single-device 0 1 2 3' > /proc/scsi/scsi" or
+ * "echo 'scsi remove-single-device 0 1 2 3' > /proc/scsi/scsi" with
+ * "0 1 2 3" replaced by the Host, Channel, Id, and Lun.
+ *
+ * Note: this seems to be aimed at parallel SCSI. Most modern busses (USB,
+ * SATA, Firewire, Fibre Channel, etc) dynamically assign these values to
+ * provide a unique identifier and nothing more.
+ */
+
+
static ssize_t proc_scsi_write(struct file *file, const char __user *buf,
size_t length, loff_t *ppos)
{
return err;
}
+/**
+ * proc_scsi_show - show contents of /proc/scsi/scsi (attached devices)
+ * @s: output goes here
+ * @p: not used
+ */
static int proc_scsi_show(struct seq_file *s, void *p)
{
seq_printf(s, "Attached devices:\n");
return 0;
}
+/**
+ * proc_scsi_open - glue function
+ * @inode: not used
+ * @file: passed to single_open()
+ *
+ * Associates proc_scsi_show with this file
+ */
static int proc_scsi_open(struct inode *inode, struct file *file)
{
/*
- * We don't really needs this for the write case but it doesn't
+ * We don't really need this for the write case but it doesn't
* harm either.
*/
return single_open(file, proc_scsi_show, NULL);
}
-static struct file_operations proc_scsi_operations = {
+static const struct file_operations proc_scsi_operations = {
+ .owner = THIS_MODULE,
.open = proc_scsi_open,
.read = seq_read,
.write = proc_scsi_write,
.release = single_release,
};
+/**
+ * scsi_init_procfs - create scsi and scsi/scsi in procfs
+ */
int __init scsi_init_procfs(void)
{
struct proc_dir_entry *pde;
if (!proc_scsi)
goto err1;
- pde = create_proc_entry("scsi/scsi", 0, NULL);
+ pde = proc_create("scsi/scsi", 0, NULL, &proc_scsi_operations);
if (!pde)
goto err2;
- pde->proc_fops = &proc_scsi_operations;
return 0;
return -ENOMEM;
}
+/**
+ * scsi_exit_procfs - Remove scsi/scsi and scsi from procfs
+ */
void scsi_exit_procfs(void)
{
remove_proc_entry("scsi/scsi", NULL);
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff