{
struct scsi_cmnd *cmd;
- cmd = kmem_cache_alloc(pool->cmd_slab, gfp_mask | pool->gfp_mask);
+ cmd = kmem_cache_zalloc(pool->cmd_slab, gfp_mask | pool->gfp_mask);
if (!cmd)
return NULL;
- memset(cmd, 0, sizeof(*cmd));
-
cmd->sense_buffer = kmem_cache_alloc(pool->sense_slab,
gfp_mask | pool->gfp_mask);
if (!cmd->sense_buffer) {
*/
struct scsi_cmnd *__scsi_get_command(struct Scsi_Host *shost, gfp_t gfp_mask)
{
- struct scsi_cmnd *cmd;
- unsigned char *buf;
-
- cmd = scsi_host_alloc_command(shost, gfp_mask);
+ struct scsi_cmnd *cmd = scsi_host_alloc_command(shost, gfp_mask);
if (unlikely(!cmd)) {
unsigned long flags;
spin_unlock_irqrestore(&shost->free_list_lock, flags);
if (cmd) {
+ void *buf, *prot;
+
buf = cmd->sense_buffer;
+ prot = cmd->prot_sdb;
+
memset(cmd, 0, sizeof(*cmd));
+
cmd->sense_buffer = buf;
+ cmd->prot_sdb = prot;
}
}
unsigned long timeout;
int rtn = 0;
- /*
- * We will use a queued command if possible, otherwise we will
- * emulate the queuing and calling of completion function ourselves.
- */
atomic_inc(&cmd->device->iorequest_cnt);
/* check if the device is still usable */
}
spin_unlock_irqrestore(host->host_lock, flags);
if (rtn) {
- scsi_queue_insert(cmd, (rtn == SCSI_MLQUEUE_DEVICE_BUSY) ?
- rtn : SCSI_MLQUEUE_HOST_BUSY);
+ if (rtn != SCSI_MLQUEUE_DEVICE_BUSY &&
+ rtn != SCSI_MLQUEUE_TARGET_BUSY)
+ rtn = SCSI_MLQUEUE_HOST_BUSY;
+
+ scsi_queue_insert(cmd, rtn);
+
SCSI_LOG_MLQUEUE(3,
printk("queuecommand : request rejected\n"));
}
void scsi_finish_command(struct scsi_cmnd *cmd)
{
struct scsi_device *sdev = cmd->device;
+ struct scsi_target *starget = scsi_target(sdev);
struct Scsi_Host *shost = sdev->host;
struct scsi_driver *drv;
unsigned int good_bytes;
* XXX(hch): What about locking?
*/
shost->host_blocked = 0;
+ starget->target_blocked = 0;
sdev->device_blocked = 0;
/*
EXPORT_SYMBOL(scsi_track_queue_full);
/**
+ * scsi_vpd_inquiry - Request a device provide us with a VPD page
+ * @sdev: The device to ask
+ * @buffer: Where to put the result
+ * @page: Which Vital Product Data to return
+ * @len: The length of the buffer
+ *
+ * This is an internal helper function. You probably want to use
+ * scsi_get_vpd_page instead.
+ *
+ * Returns 0 on success or a negative error number.
+ */
+static int scsi_vpd_inquiry(struct scsi_device *sdev, unsigned char *buffer,
+ u8 page, unsigned len)
+{
+ int result;
+ unsigned char cmd[16];
+
+ cmd[0] = INQUIRY;
+ cmd[1] = 1; /* EVPD */
+ cmd[2] = page;
+ cmd[3] = len >> 8;
+ cmd[4] = len & 0xff;
+ cmd[5] = 0; /* Control byte */
+
+ /*
+ * I'm not convinced we need to try quite this hard to get VPD, but
+ * all the existing users tried this hard.
+ */
+ result = scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buffer,
+ len, NULL, 30 * HZ, 3, NULL);
+ if (result)
+ return result;
+
+ /* Sanity check that we got the page back that we asked for */
+ if (buffer[1] != page)
+ return -EIO;
+
+ return 0;
+}
+
+/**
+ * scsi_get_vpd_page - Get Vital Product Data from a SCSI device
+ * @sdev: The device to ask
+ * @page: Which Vital Product Data to return
+ *
+ * SCSI devices may optionally supply Vital Product Data. Each 'page'
+ * of VPD is defined in the appropriate SCSI document (eg SPC, SBC).
+ * If the device supports this VPD page, this routine returns a pointer
+ * to a buffer containing the data from that page. The caller is
+ * responsible for calling kfree() on this pointer when it is no longer
+ * needed. If we cannot retrieve the VPD page this routine returns %NULL.
+ */
+unsigned char *scsi_get_vpd_page(struct scsi_device *sdev, u8 page)
+{
+ int i, result;
+ unsigned int len;
+ const unsigned int init_vpd_len = 255;
+ unsigned char *buf = kmalloc(init_vpd_len, GFP_KERNEL);
+
+ if (!buf)
+ return NULL;
+
+ /* Ask for all the pages supported by this device */
+ result = scsi_vpd_inquiry(sdev, buf, 0, init_vpd_len);
+ if (result)
+ goto fail;
+
+ /* If the user actually wanted this page, we can skip the rest */
+ if (page == 0)
+ return buf;
+
+ for (i = 0; i < buf[3]; i++)
+ if (buf[i + 4] == page)
+ goto found;
+ /* The device claims it doesn't support the requested page */
+ goto fail;
+
+ found:
+ result = scsi_vpd_inquiry(sdev, buf, page, 255);
+ if (result)
+ goto fail;
+
+ /*
+ * Some pages are longer than 255 bytes. The actual length of
+ * the page is returned in the header.
+ */
+ len = ((buf[2] << 8) | buf[3]) + 4;
+ if (len <= init_vpd_len)
+ return buf;
+
+ kfree(buf);
+ buf = kmalloc(len, GFP_KERNEL);
+ result = scsi_vpd_inquiry(sdev, buf, page, len);
+ if (result)
+ goto fail;
+
+ return buf;
+
+ fail:
+ kfree(buf);
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(scsi_get_vpd_page);
+
+/**
* scsi_device_get - get an additional reference to a scsi_device
* @sdev: device to get a reference to
*
* Description: Looks up the scsi_device with the specified @lun for a given
* @starget. The returned scsi_device does not have an additional
* reference. You must hold the host's host_lock over this call and
- * any access to the returned scsi_device.
+ * any access to the returned scsi_device. A scsi_device in state
+ * SDEV_DEL is skipped.
*
* Note: The only reason why drivers should use this is because
* they need to access the device list in irq context. Otherwise you
struct scsi_device *sdev;
list_for_each_entry(sdev, &starget->devices, same_target_siblings) {
+ if (sdev->sdev_state == SDEV_DEL)
+ continue;
if (sdev->lun ==lun)
return sdev;
}
* @starget: SCSI target pointer
* @lun: SCSI Logical Unit Number
*
- * Description: Looks up the scsi_device with the specified @channel, @id, @lun
- * for a given host. The returned scsi_device has an additional reference that
+ * Description: Looks up the scsi_device with the specified @lun for a given
+ * @starget. The returned scsi_device has an additional reference that
* needs to be released with scsi_device_put once you're done with it.
**/
struct scsi_device *scsi_device_lookup_by_target(struct scsi_target *starget,
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff