*/
#include "ql4_def.h"
-
-/**
- * qla2x00_process_completed_request() - Process a Fast Post response.
- * @ha: SCSI driver HA context
- * @index: SRB index
- **/
-static void qla4xxx_process_completed_request(struct scsi_qla_host *ha,
- uint32_t index)
-{
- struct srb *srb;
-
- srb = qla4xxx_del_from_active_array(ha, index);
- if (srb) {
- /* Save ISP completion status */
- srb->cmd->result = DID_OK << 16;
- qla4xxx_srb_compl(ha, srb);
- } else {
- DEBUG2(printk("scsi%ld: Invalid ISP SCSI completion handle = "
- "%d\n", ha->host_no, index));
- set_bit(DPC_RESET_HA, &ha->dpc_flags);
- }
-}
+#include "ql4_glbl.h"
+#include "ql4_dbg.h"
+#include "ql4_inline.h"
/**
* qla4xxx_status_entry - processes status IOCBs
uint32_t residual;
uint16_t sensebytecnt;
- if (sts_entry->completionStatus == SCS_COMPLETE &&
- sts_entry->scsiStatus == 0) {
- qla4xxx_process_completed_request(ha,
- le32_to_cpu(sts_entry->
- handle));
- return;
- }
-
srb = qla4xxx_del_from_active_array(ha, le32_to_cpu(sts_entry->handle));
if (!srb) {
/* FIXMEdg: Don't we need to reset ISP in this case??? */
"handle 0x%x, sp=%p. This cmd may have already "
"been completed.\n", ha->host_no, __func__,
le32_to_cpu(sts_entry->handle), srb));
+ dev_warn(&ha->pdev->dev, "%s invalid status entry:"
+ " handle=0x%0x\n", __func__, sts_entry->handle);
+ set_bit(DPC_RESET_HA, &ha->dpc_flags);
return;
}
scsi_status = sts_entry->scsiStatus;
switch (sts_entry->completionStatus) {
case SCS_COMPLETE:
- if (scsi_status == 0) {
- cmd->result = DID_OK << 16;
+
+ if (sts_entry->iscsiFlags & ISCSI_FLAG_RESIDUAL_OVER) {
+ cmd->result = DID_ERROR << 16;
break;
}
- if (sts_entry->iscsiFlags &
- (ISCSI_FLAG_RESIDUAL_OVER|ISCSI_FLAG_RESIDUAL_UNDER))
- cmd->resid = residual;
+ if (sts_entry->iscsiFlags &ISCSI_FLAG_RESIDUAL_UNDER) {
+ scsi_set_resid(cmd, residual);
+ if (!scsi_status && ((scsi_bufflen(cmd) - residual) <
+ cmd->underflow)) {
+
+ cmd->result = DID_ERROR << 16;
+
+ DEBUG2(printk("scsi%ld:%d:%d:%d: %s: "
+ "Mid-layer Data underrun0, "
+ "xferlen = 0x%x, "
+ "residual = 0x%x\n", ha->host_no,
+ cmd->device->channel,
+ cmd->device->id,
+ cmd->device->lun, __func__,
+ scsi_bufflen(cmd), residual));
+ break;
+ }
+ }
cmd->result = DID_OK << 16 | scsi_status;
break;
/* Copy Sense Data into sense buffer. */
- memset(cmd->sense_buffer, 0, sizeof(cmd->sense_buffer));
+ memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
sensebytecnt = le16_to_cpu(sts_entry->senseDataByteCnt);
if (sensebytecnt == 0)
break;
memcpy(cmd->sense_buffer, sts_entry->senseData,
- min(sensebytecnt,
- (uint16_t) sizeof(cmd->sense_buffer)));
+ min_t(uint16_t, sensebytecnt, SCSI_SENSE_BUFFERSIZE));
DEBUG2(printk("scsi%ld:%d:%d:%d: %s: sense key = %x, "
"ASC/ASCQ = %02x/%02x\n", ha->host_no,
ha->host_no, cmd->device->channel,
cmd->device->id, cmd->device->lun));
- cmd->result = DID_BUS_BUSY << 16;
+ cmd->result = DID_TRANSPORT_DISRUPTED << 16;
/*
* Mark device missing so that we won't continue to send
case SCS_DATA_UNDERRUN:
case SCS_DATA_OVERRUN:
- if (sts_entry->iscsiFlags & ISCSI_FLAG_RESIDUAL_OVER) {
+ if ((sts_entry->iscsiFlags & ISCSI_FLAG_RESIDUAL_OVER) ||
+ (sts_entry->completionStatus == SCS_DATA_OVERRUN)) {
DEBUG2(printk("scsi%ld:%d:%d:%d: %s: " "Data overrun, "
"residual = 0x%x\n", ha->host_no,
cmd->device->channel, cmd->device->id,
break;
}
- if ((sts_entry->iscsiFlags & ISCSI_FLAG_RESIDUAL_UNDER) == 0) {
- /*
- * Firmware detected a SCSI transport underrun
- * condition
- */
- cmd->resid = residual;
- DEBUG2(printk("scsi%ld:%d:%d:%d: %s: UNDERRUN status "
- "detected, xferlen = 0x%x, residual = "
- "0x%x\n",
- ha->host_no, cmd->device->channel,
- cmd->device->id,
- cmd->device->lun, __func__,
- cmd->request_bufflen,
- residual));
- }
+ scsi_set_resid(cmd, residual);
/*
* If there is scsi_status, it takes precedense over
break;
/* Copy Sense Data into sense buffer. */
- memset(cmd->sense_buffer, 0,
- sizeof(cmd->sense_buffer));
+ memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
sensebytecnt =
le16_to_cpu(sts_entry->senseDataByteCnt);
break;
memcpy(cmd->sense_buffer, sts_entry->senseData,
- min(sensebytecnt,
- (uint16_t) sizeof(cmd->sense_buffer)));
+ min_t(uint16_t, sensebytecnt, SCSI_SENSE_BUFFERSIZE));
DEBUG2(printk("scsi%ld:%d:%d:%d: %s: sense key = %x, "
"ASC/ASCQ = %02x/%02x\n", ha->host_no,
if ((sts_entry->iscsiFlags &
ISCSI_FLAG_RESIDUAL_UNDER) == 0) {
cmd->result = DID_BUS_BUSY << 16;
- } else if ((cmd->request_bufflen - residual) <
+ } else if ((scsi_bufflen(cmd) - residual) <
cmd->underflow) {
/*
* Handle mid-layer underflow???
* will return DID_ERROR.
*/
DEBUG2(printk("scsi%ld:%d:%d:%d: %s: "
- "Mid-layer Data underrun, "
- "xferlen = 0x%x, "
- "residual = 0x%x\n", ha->host_no,
- cmd->device->channel,
- cmd->device->id,
- cmd->device->lun, __func__,
- cmd->request_bufflen, residual));
+ "Mid-layer Data underrun1, "
+ "xferlen = 0x%x, "
+ "residual = 0x%x\n", ha->host_no,
+ cmd->device->channel,
+ cmd->device->id,
+ cmd->device->lun, __func__,
+ scsi_bufflen(cmd), residual));
cmd->result = DID_ERROR << 16;
} else {
if (atomic_read(&ddb_entry->state) == DDB_STATE_ONLINE)
qla4xxx_mark_device_missing(ha, ddb_entry);
- cmd->result = DID_BUS_BUSY << 16;
+ cmd->result = DID_TRANSPORT_DISRUPTED << 16;
break;
case SCS_QUEUE_FULL:
uint32_t mbox_status)
{
int i;
+ uint32_t mbox_stat2, mbox_stat3;
if ((mbox_status == MBOX_STS_BUSY) ||
(mbox_status == MBOX_STS_INTERMEDIATE_COMPLETION) ||
} else if (mbox_status >> 12 == MBOX_ASYNC_EVENT_STATUS) {
/* Immediately process the AENs that don't require much work.
* Only queue the database_changed AENs */
+ if (ha->aen_log.count < MAX_AEN_ENTRIES) {
+ for (i = 0; i < MBOX_AEN_REG_COUNT; i++)
+ ha->aen_log.entry[ha->aen_log.count].mbox_sts[i] =
+ readl(&ha->reg->mailbox[i]);
+ ha->aen_log.count++;
+ }
switch (mbox_status) {
case MBOX_ASTS_SYSTEM_ERROR:
/* Log Mailbox registers */
mbox_status));
break;
+ case MBOX_ASTS_IP_ADDR_STATE_CHANGED:
+ mbox_stat2 = readl(&ha->reg->mailbox[2]);
+ mbox_stat3 = readl(&ha->reg->mailbox[3]);
+
+ if ((mbox_stat3 == 5) && (mbox_stat2 == 3))
+ set_bit(DPC_GET_DHCP_IP_ADDR, &ha->dpc_flags);
+ else if ((mbox_stat3 == 2) && (mbox_stat2 == 5))
+ set_bit(DPC_RESET_HA, &ha->dpc_flags);
+ break;
+
case MBOX_ASTS_MAC_ADDRESS_CHANGED:
case MBOX_ASTS_DNS:
/* No action */
/* Queue AEN information and process it in the DPC
* routine */
if (ha->aen_q_count > 0) {
- /* advance pointer */
- if (ha->aen_in == (MAX_AEN_ENTRIES - 1))
- ha->aen_in = 0;
- else
- ha->aen_in++;
/* decrement available counter */
ha->aen_q_count--;
ha->aen_q[ha->aen_in].mbox_sts[2],
ha->aen_q[ha->aen_in].mbox_sts[3],
ha->aen_q[ha->aen_in]. mbox_sts[4]));
+ /* advance pointer */
+ ha->aen_in++;
+ if (ha->aen_in == MAX_AEN_ENTRIES)
+ ha->aen_in = 0;
/* The DPC routine will process the aen */
set_bit(DPC_AEN, &ha->dpc_flags);
spin_lock_irqsave(&ha->hardware_lock, flags);
while (ha->aen_out != ha->aen_in) {
- /* Advance pointers for next entry */
- if (ha->aen_out == (MAX_AEN_ENTRIES - 1))
- ha->aen_out = 0;
- else
- ha->aen_out++;
-
- ha->aen_q_count++;
aen = &ha->aen_q[ha->aen_out];
-
/* copy aen information to local structure */
for (i = 0; i < MBOX_AEN_REG_COUNT; i++)
mbox_sts[i] = aen->mbox_sts[i];
+ ha->aen_q_count++;
+ ha->aen_out++;
+
+ if (ha->aen_out == MAX_AEN_ENTRIES)
+ ha->aen_out = 0;
+
spin_unlock_irqrestore(&ha->hardware_lock, flags);
- DEBUG(printk("scsi%ld: AEN[%d] %04x, index [%d] state=%04x "
- "mod=%x conerr=%08x \n", ha->host_no, ha->aen_out,
- mbox_sts[0], mbox_sts[2], mbox_sts[3],
- mbox_sts[1], mbox_sts[4]));
+ DEBUG2(printk("qla4xxx(%ld): AEN[%d]=0x%08x, mbx1=0x%08x mbx2=0x%08x"
+ " mbx3=0x%08x mbx4=0x%08x\n", ha->host_no,
+ (ha->aen_out ? (ha->aen_out-1): (MAX_AEN_ENTRIES-1)),
+ mbox_sts[0], mbox_sts[1], mbox_sts[2],
+ mbox_sts[3], mbox_sts[4]));
switch (mbox_sts[0]) {
case MBOX_ASTS_DATABASE_CHANGED:
spin_lock_irqsave(&ha->hardware_lock, flags);
}
spin_unlock_irqrestore(&ha->hardware_lock, flags);
-
}
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff