#include "qla_def.h"
#include <linux/delay.h>
+#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <asm/uaccess.h>
wait_cnt = NVR_WAIT_CNT;
do {
if (!--wait_cnt) {
- DEBUG9_10(printk("%s(%ld): NVRAM didn't go ready...\n",
- __func__, vha->host_no));
+ DEBUG9_10(qla_printk(KERN_WARNING, ha,
+ "NVRAM didn't go ready...\n"));
break;
}
NVRAM_DELAY();
wait_cnt = NVR_WAIT_CNT;
do {
if (!--wait_cnt) {
- DEBUG9_10(qla_printk(
+ DEBUG9_10(qla_printk(KERN_WARNING, ha,
"NVRAM didn't go ready...\n"));
break;
}
wait_cnt = NVR_WAIT_CNT;
do {
if (!--wait_cnt) {
- DEBUG9_10(qla_printk("NVRAM didn't go ready...\n"));
+ DEBUG9_10(qla_printk(KERN_WARNING, ha,
+ "NVRAM didn't go ready...\n"));
break;
}
NVRAM_DELAY();
/* Flash Manipulation Routines */
/*****************************************************************************/
-#define OPTROM_BURST_SIZE 0x1000
-#define OPTROM_BURST_DWORDS (OPTROM_BURST_SIZE / 4)
-
static inline uint32_t
flash_conf_addr(struct qla_hw_data *ha, uint32_t faddr)
{
*start = FA_FLASH_LAYOUT_ADDR;
else if (IS_QLA81XX(ha))
*start = FA_FLASH_LAYOUT_ADDR_81;
+ else if (IS_QLA82XX(ha)) {
+ *start = FA_FLASH_LAYOUT_ADDR_82;
+ goto end;
+ }
/* Begin with first PCI expansion ROM header. */
buf = (uint8_t *)req->ring;
dcode = (uint32_t *)req->ring;
/* Good data. Use specified location. */
loc = locations[1];
- *start = le16_to_cpu(fltl->start_hi) << 16 |
- le16_to_cpu(fltl->start_lo);
+ *start = (le16_to_cpu(fltl->start_hi) << 16 |
+ le16_to_cpu(fltl->start_lo)) >> 2;
end:
DEBUG2(qla_printk(KERN_DEBUG, ha, "FLTL[%s] = 0x%x.\n", loc, *start));
return QLA_SUCCESS;
{ FA_BOOT_CODE_ADDR, FA_BOOT_CODE_ADDR, FA_BOOT_CODE_ADDR_81 };
const uint32_t def_vpd_nvram[] =
{ FA_VPD_NVRAM_ADDR, FA_VPD_NVRAM_ADDR, FA_VPD_NVRAM_ADDR_81 };
+ const uint32_t def_vpd0[] =
+ { 0, 0, FA_VPD0_ADDR_81 };
+ const uint32_t def_vpd1[] =
+ { 0, 0, FA_VPD1_ADDR_81 };
+ const uint32_t def_nvram0[] =
+ { 0, 0, FA_NVRAM0_ADDR_81 };
+ const uint32_t def_nvram1[] =
+ { 0, 0, FA_NVRAM1_ADDR_81 };
const uint32_t def_fdt[] =
{ FA_FLASH_DESCR_ADDR_24, FA_FLASH_DESCR_ADDR,
FA_FLASH_DESCR_ADDR_81 };
const uint32_t def_npiv_conf1[] =
{ FA_NPIV_CONF1_ADDR_24, FA_NPIV_CONF1_ADDR,
FA_NPIV_CONF1_ADDR_81 };
+ const uint32_t fcp_prio_cfg0[] =
+ { FA_FCP_PRIO0_ADDR, FA_FCP_PRIO0_ADDR_25,
+ 0 };
+ const uint32_t fcp_prio_cfg1[] =
+ { FA_FCP_PRIO1_ADDR, FA_FCP_PRIO1_ADDR_25,
+ 0 };
uint32_t def;
uint16_t *wptr;
uint16_t cnt, chksum;
"end=0x%x size=0x%x.\n", le32_to_cpu(region->code), start,
le32_to_cpu(region->end) >> 2, le32_to_cpu(region->size)));
- switch (le32_to_cpu(region->code)) {
+ switch (le32_to_cpu(region->code) & 0xff) {
case FLT_REG_FW:
ha->flt_region_fw = start;
break;
break;
case FLT_REG_VPD_0:
ha->flt_region_vpd_nvram = start;
+ if (IS_QLA82XX(ha))
+ break;
+ if (ha->flags.port0)
+ ha->flt_region_vpd = start;
+ break;
+ case FLT_REG_VPD_1:
+ if (IS_QLA82XX(ha))
+ break;
+ if (!ha->flags.port0)
+ ha->flt_region_vpd = start;
+ break;
+ case FLT_REG_NVRAM_0:
+ if (ha->flags.port0)
+ ha->flt_region_nvram = start;
+ break;
+ case FLT_REG_NVRAM_1:
+ if (!ha->flags.port0)
+ ha->flt_region_nvram = start;
break;
case FLT_REG_FDT:
ha->flt_region_fdt = start;
break;
case FLT_REG_NPIV_CONF_0:
- if (!(PCI_FUNC(ha->pdev->devfn) & 1))
+ if (ha->flags.port0)
ha->flt_region_npiv_conf = start;
break;
case FLT_REG_NPIV_CONF_1:
- if (PCI_FUNC(ha->pdev->devfn) & 1)
+ if (!ha->flags.port0)
ha->flt_region_npiv_conf = start;
break;
+ case FLT_REG_GOLD_FW:
+ ha->flt_region_gold_fw = start;
+ break;
+ case FLT_REG_FCP_PRIO_0:
+ if (ha->flags.port0)
+ ha->flt_region_fcp_prio = start;
+ break;
+ case FLT_REG_FCP_PRIO_1:
+ if (!ha->flags.port0)
+ ha->flt_region_fcp_prio = start;
+ break;
+ case FLT_REG_BOOT_CODE_82XX:
+ ha->flt_region_boot = start;
+ break;
+ case FLT_REG_FW_82XX:
+ ha->flt_region_fw = start;
+ break;
+ case FLT_REG_GOLD_FW_82XX:
+ ha->flt_region_gold_fw = start;
+ break;
+ case FLT_REG_BOOTLOAD_82XX:
+ ha->flt_region_bootload = start;
+ break;
+ case FLT_REG_VPD_82XX:
+ ha->flt_region_vpd = start;
+ break;
}
}
goto done;
ha->flt_region_fw = def_fw[def];
ha->flt_region_boot = def_boot[def];
ha->flt_region_vpd_nvram = def_vpd_nvram[def];
+ ha->flt_region_vpd = ha->flags.port0 ?
+ def_vpd0[def] : def_vpd1[def];
+ ha->flt_region_nvram = ha->flags.port0 ?
+ def_nvram0[def] : def_nvram1[def];
ha->flt_region_fdt = def_fdt[def];
- ha->flt_region_npiv_conf = !(PCI_FUNC(ha->pdev->devfn) & 1) ?
- def_npiv_conf0[def]: def_npiv_conf1[def];
+ ha->flt_region_npiv_conf = ha->flags.port0 ?
+ def_npiv_conf0[def] : def_npiv_conf1[def];
+ ha->flt_region_fcp_prio = ha->flags.port0 ?
+ fcp_prio_cfg0[def] : fcp_prio_cfg1[def];
done:
DEBUG2(qla_printk(KERN_DEBUG, ha, "FLT[%s]: boot=0x%x fw=0x%x "
- "vpd_nvram=0x%x fdt=0x%x flt=0x%x npiv=0x%x.\n", loc,
- ha->flt_region_boot, ha->flt_region_fw, ha->flt_region_vpd_nvram,
+ "vpd_nvram=0x%x vpd=0x%x nvram=0x%x fdt=0x%x flt=0x%x "
+ "npiv=0x%x.\n", loc, ha->flt_region_boot, ha->flt_region_fw,
+ ha->flt_region_vpd_nvram, ha->flt_region_vpd, ha->flt_region_nvram,
ha->flt_region_fdt, ha->flt_region_flt, ha->flt_region_npiv_conf));
}
uint16_t *wptr;
struct qla_fdt_layout *fdt;
uint8_t man_id, flash_id;
- uint16_t mid, fid;
+ uint16_t mid = 0, fid = 0;
struct qla_hw_data *ha = vha->hw;
struct req_que *req = ha->req_q_map[0];
goto done;
no_flash_data:
loc = locations[0];
+ if (IS_QLA82XX(ha)) {
+ ha->fdt_block_size = FLASH_BLK_SIZE_64K;
+ goto done;
+ }
qla24xx_get_flash_manufacturer(ha, &man_id, &flash_id);
mid = man_id;
fid = flash_id;
ha->fdt_block_size));
}
+static void
+qla2xxx_get_idc_param(scsi_qla_host_t *vha)
+{
+#define QLA82XX_IDC_PARAM_ADDR 0x003e885c
+ uint32_t *wptr;
+ struct qla_hw_data *ha = vha->hw;
+ struct req_que *req = ha->req_q_map[0];
+
+ if (!IS_QLA82XX(ha))
+ return;
+
+ wptr = (uint32_t *)req->ring;
+ ha->isp_ops->read_optrom(vha, (uint8_t *)req->ring,
+ QLA82XX_IDC_PARAM_ADDR , 8);
+
+ if (*wptr == __constant_cpu_to_le32(0xffffffff)) {
+ ha->nx_dev_init_timeout = QLA82XX_ROM_DEV_INIT_TIMEOUT;
+ ha->nx_reset_timeout = QLA82XX_ROM_DRV_RESET_ACK_TIMEOUT;
+ } else {
+ ha->nx_dev_init_timeout = le32_to_cpu(*wptr++);
+ ha->nx_reset_timeout = le32_to_cpu(*wptr);
+ }
+ return;
+}
+
int
qla2xxx_get_flash_info(scsi_qla_host_t *vha)
{
uint32_t flt_addr;
struct qla_hw_data *ha = vha->hw;
- if (!IS_QLA24XX_TYPE(ha) && !IS_QLA25XX(ha) && !IS_QLA81XX(ha))
+ if (!IS_QLA24XX_TYPE(ha) && !IS_QLA25XX(ha) && !IS_QLA8XXX_TYPE(ha))
return QLA_SUCCESS;
ret = qla2xxx_find_flt_start(vha, &flt_addr);
qla2xxx_get_flt_info(vha, flt_addr);
qla2xxx_get_fdt_info(vha);
+ qla2xxx_get_idc_param(vha);
return QLA_SUCCESS;
}
struct qla_npiv_entry *entry;
struct qla_hw_data *ha = vha->hw;
- if (!IS_QLA24XX_TYPE(ha) && !IS_QLA25XX(ha) && !IS_QLA81XX(ha))
+ if (!IS_QLA24XX_TYPE(ha) && !IS_QLA25XX(ha) && !IS_QLA8XXX_TYPE(ha))
return;
ha->isp_ops->read_optrom(vha, (uint8_t *)&hdr,
struct fc_vport_identifiers vid;
struct fc_vport *vport;
+ memcpy(&ha->npiv_info[i], entry, sizeof(struct qla_npiv_entry));
+
flags = le16_to_cpu(entry->flags);
if (flags == 0xffff)
continue;
vid.port_name = wwn_to_u64(entry->port_name);
vid.node_name = wwn_to_u64(entry->node_name);
- memcpy(&ha->npiv_info[i], entry, sizeof(struct qla_npiv_entry));
-
- DEBUG2(qla_printk(KERN_DEBUG, ha, "NPIV[%02x]: wwpn=%llx "
+ DEBUG2(qla_printk(KERN_INFO, ha, "NPIV[%02x]: wwpn=%llx "
"wwnn=%llx vf_id=0x%x Q_qos=0x%x F_qos=0x%x.\n", cnt,
- vid.port_name, vid.node_name, le16_to_cpu(entry->vf_id),
+ (unsigned long long)vid.port_name,
+ (unsigned long long)vid.node_name,
+ le16_to_cpu(entry->vf_id),
entry->q_qos, entry->f_qos));
if (i < QLA_PRECONFIG_VPORTS) {
qla_printk(KERN_INFO, ha,
"NPIV-Config: Failed to create vport [%02x]: "
"wwpn=%llx wwnn=%llx.\n", cnt,
- vid.port_name, vid.node_name);
+ (unsigned long long)vid.port_name,
+ (unsigned long long)vid.node_name);
}
}
done:
kfree(data);
- ha->npiv_info = NULL;
}
-static void
-qla24xx_unprotect_flash(struct qla_hw_data *ha)
+static int
+qla24xx_unprotect_flash(scsi_qla_host_t *vha)
{
+ struct qla_hw_data *ha = vha->hw;
struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
+ if (ha->flags.fac_supported)
+ return qla81xx_fac_do_write_enable(vha, 1);
+
/* Enable flash write. */
WRT_REG_DWORD(®->ctrl_status,
RD_REG_DWORD(®->ctrl_status) | CSRX_FLASH_ENABLE);
RD_REG_DWORD(®->ctrl_status); /* PCI Posting. */
if (!ha->fdt_wrt_disable)
- return;
+ goto done;
- /* Disable flash write-protection. */
+ /* Disable flash write-protection, first clear SR protection bit */
qla24xx_write_flash_dword(ha, flash_conf_addr(ha, 0x101), 0);
- /* Some flash parts need an additional zero-write to clear bits.*/
+ /* Then write zero again to clear remaining SR bits.*/
qla24xx_write_flash_dword(ha, flash_conf_addr(ha, 0x101), 0);
+done:
+ return QLA_SUCCESS;
}
-static void
-qla24xx_protect_flash(struct qla_hw_data *ha)
+static int
+qla24xx_protect_flash(scsi_qla_host_t *vha)
{
uint32_t cnt;
+ struct qla_hw_data *ha = vha->hw;
struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
+ if (ha->flags.fac_supported)
+ return qla81xx_fac_do_write_enable(vha, 0);
+
if (!ha->fdt_wrt_disable)
goto skip_wrt_protect;
WRT_REG_DWORD(®->ctrl_status,
RD_REG_DWORD(®->ctrl_status) & ~CSRX_FLASH_ENABLE);
RD_REG_DWORD(®->ctrl_status); /* PCI Posting. */
+
+ return QLA_SUCCESS;
+}
+
+static int
+qla24xx_erase_sector(scsi_qla_host_t *vha, uint32_t fdata)
+{
+ struct qla_hw_data *ha = vha->hw;
+ uint32_t start, finish;
+
+ if (ha->flags.fac_supported) {
+ start = fdata >> 2;
+ finish = start + (ha->fdt_block_size >> 2) - 1;
+ return qla81xx_fac_erase_sector(vha, flash_data_addr(ha,
+ start), flash_data_addr(ha, finish));
+ }
+
+ return qla24xx_write_flash_dword(ha, ha->fdt_erase_cmd,
+ (fdata & 0xff00) | ((fdata << 16) & 0xff0000) |
+ ((fdata >> 16) & 0xff));
}
static int
uint32_t dwords)
{
int ret;
- uint32_t liter, miter;
+ uint32_t liter;
uint32_t sec_mask, rest_addr;
uint32_t fdata;
dma_addr_t optrom_dma;
void *optrom = NULL;
- uint32_t *s, *d;
struct qla_hw_data *ha = vha->hw;
- ret = QLA_SUCCESS;
-
/* Prepare burst-capable write on supported ISPs. */
if ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && !(faddr & 0xfff) &&
dwords > OPTROM_BURST_DWORDS) {
rest_addr = (ha->fdt_block_size >> 2) - 1;
sec_mask = ~rest_addr;
- qla24xx_unprotect_flash(ha);
+ ret = qla24xx_unprotect_flash(vha);
+ if (ret != QLA_SUCCESS) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to unprotect flash for update.\n");
+ goto done;
+ }
for (liter = 0; liter < dwords; liter++, faddr++, dwptr++) {
fdata = (faddr & sec_mask) << 2;
ha->fdt_unprotect_sec_cmd,
(fdata & 0xff00) | ((fdata << 16) &
0xff0000) | ((fdata >> 16) & 0xff));
- ret = qla24xx_write_flash_dword(ha, ha->fdt_erase_cmd,
- (fdata & 0xff00) |((fdata << 16) &
- 0xff0000) | ((fdata >> 16) & 0xff));
+ ret = qla24xx_erase_sector(vha, fdata);
if (ret != QLA_SUCCESS) {
- DEBUG9(qla_printk("Unable to flash sector: "
- "address=%x.\n", faddr));
+ DEBUG9(qla_printk(KERN_WARNING, ha,
+ "Unable to erase sector: address=%x.\n",
+ faddr));
break;
}
}
/* Go with burst-write. */
if (optrom && (liter + OPTROM_BURST_DWORDS) <= dwords) {
/* Copy data to DMA'ble buffer. */
- for (miter = 0, s = optrom, d = dwptr;
- miter < OPTROM_BURST_DWORDS; miter++, s++, d++)
- *s = cpu_to_le32(*d);
+ memcpy(optrom, dwptr, OPTROM_BURST_SIZE);
ret = qla2x00_load_ram(vha, optrom_dma,
flash_data_addr(ha, faddr),
0xff0000) | ((fdata >> 16) & 0xff));
}
- qla24xx_protect_flash(ha);
-
+ ret = qla24xx_protect_flash(vha);
+ if (ret != QLA_SUCCESS)
+ qla_printk(KERN_WARNING, ha,
+ "Unable to protect flash after update.\n");
+done:
if (optrom)
dma_free_coherent(&ha->pdev->dev,
OPTROM_BURST_SIZE, optrom, optrom_dma);
uint32_t *dwptr;
struct qla_hw_data *ha = vha->hw;
+ if (IS_QLA82XX(ha))
+ return buf;
+
/* Dword reads to flash. */
dwptr = (uint32_t *)buf;
for (i = 0; i < bytes >> 2; i++, naddr++)
ret = QLA_SUCCESS;
+ if (IS_QLA82XX(ha))
+ return ret;
+
/* Enable flash write. */
WRT_REG_DWORD(®->ctrl_status,
RD_REG_DWORD(®->ctrl_status) | CSRX_FLASH_ENABLE);
ret = qla24xx_write_flash_dword(ha,
nvram_data_addr(ha, naddr), cpu_to_le32(*dwptr));
if (ret != QLA_SUCCESS) {
- DEBUG9(qla_printk("Unable to program nvram address=%x "
- "data=%x.\n", naddr, *dwptr));
+ DEBUG9(qla_printk(KERN_WARNING, ha,
+ "Unable to program nvram address=%x data=%x.\n",
+ naddr, *dwptr));
break;
}
}
struct qla_hw_data *ha = vha->hw;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
+ if (IS_QLA82XX(ha))
+ return;
+
spin_lock_irqsave(&ha->hardware_lock, flags);
/* Save the Original GPIOE. */
struct qla_hw_data *ha = vha->hw;
struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
+ if (IS_QLA82XX(ha))
+ return QLA_SUCCESS;
+
if (ha->beacon_blink_led == 0) {
/* Enable firmware for update */
ha->fw_options[1] |= ADD_FO1_DISABLE_GPIO_LED_CTRL;
struct qla_hw_data *ha = vha->hw;
struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
+ if (IS_QLA82XX(ha))
+ return QLA_SUCCESS;
+
ha->beacon_blink_led = 0;
ha->beacon_color_state = QLA_LED_ALL_ON;
clear_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
qla2xxx_wake_dpc(vha);
- qla2x00_wait_for_hba_online(vha);
+ qla2x00_wait_for_chip_reset(vha);
scsi_unblock_requests(vha->host);
}
rval = qla24xx_write_flash_data(vha, (uint32_t *)buf, offset >> 2,
length >> 2);
- /* Resume HBA -- RISC reset needed. */
clear_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
- set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
- qla2xxx_wake_dpc(vha);
- qla2x00_wait_for_hba_online(vha);
scsi_unblock_requests(vha->host);
return rval;
uint32_t faddr, left, burst;
struct qla_hw_data *ha = vha->hw;
+ if (IS_QLA25XX(ha) || IS_QLA81XX(ha))
+ goto try_fast;
if (offset & 0xfff)
goto slow_read;
if (length < OPTROM_BURST_SIZE)
goto slow_read;
+try_fast:
optrom = dma_alloc_coherent(&ha->pdev->dev, OPTROM_BURST_SIZE,
&optrom_dma, GFP_KERNEL);
if (!optrom) {
int i;
struct qla_hw_data *ha = vha->hw;
+ if (IS_QLA82XX(ha))
+ return ret;
+
if (!mbuf)
return QLA_FUNCTION_FAILED;
dcode = mbuf;
/* Begin with first PCI expansion ROM header. */
- pcihdr = ha->flt_region_boot;
+ pcihdr = ha->flt_region_boot << 2;
last_image = 1;
do {
/* Verify PCI expansion ROM header. */
return 0;
}
+
+int
+qla24xx_read_fcp_prio_cfg(scsi_qla_host_t *vha)
+{
+ int len, max_len;
+ uint32_t fcp_prio_addr;
+ struct qla_hw_data *ha = vha->hw;
+
+ if (!ha->fcp_prio_cfg) {
+ ha->fcp_prio_cfg = vmalloc(FCP_PRIO_CFG_SIZE);
+ if (!ha->fcp_prio_cfg) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to allocate memory for fcp priority data "
+ "(%x).\n", FCP_PRIO_CFG_SIZE);
+ return QLA_FUNCTION_FAILED;
+ }
+ }
+ memset(ha->fcp_prio_cfg, 0, FCP_PRIO_CFG_SIZE);
+
+ fcp_prio_addr = ha->flt_region_fcp_prio;
+
+ /* first read the fcp priority data header from flash */
+ ha->isp_ops->read_optrom(vha, (uint8_t *)ha->fcp_prio_cfg,
+ fcp_prio_addr << 2, FCP_PRIO_CFG_HDR_SIZE);
+
+ if (!qla24xx_fcp_prio_cfg_valid(ha->fcp_prio_cfg, 0))
+ goto fail;
+
+ /* read remaining FCP CMD config data from flash */
+ fcp_prio_addr += (FCP_PRIO_CFG_HDR_SIZE >> 2);
+ len = ha->fcp_prio_cfg->num_entries * FCP_PRIO_CFG_ENTRY_SIZE;
+ max_len = FCP_PRIO_CFG_SIZE - FCP_PRIO_CFG_HDR_SIZE;
+
+ ha->isp_ops->read_optrom(vha, (uint8_t *)&ha->fcp_prio_cfg->entry[0],
+ fcp_prio_addr << 2, (len < max_len ? len : max_len));
+
+ /* revalidate the entire FCP priority config data, including entries */
+ if (!qla24xx_fcp_prio_cfg_valid(ha->fcp_prio_cfg, 1))
+ goto fail;
+
+ ha->flags.fcp_prio_enabled = 1;
+ return QLA_SUCCESS;
+fail:
+ vfree(ha->fcp_prio_cfg);
+ ha->fcp_prio_cfg = NULL;
+ return QLA_FUNCTION_FAILED;
+}
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff