/*
* QLogic Fibre Channel HBA Driver
- * Copyright (c) 2003-2005 QLogic Corporation
+ * Copyright (c) 2003-2008 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
#include "qla_def.h"
#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
#include <asm/uaccess.h>
-static uint16_t qla2x00_nvram_request(scsi_qla_host_t *, uint32_t);
-static void qla2x00_nv_deselect(scsi_qla_host_t *);
-static void qla2x00_nv_write(scsi_qla_host_t *, uint16_t);
-
/*
* NVRAM support routines
*/
* qla2x00_lock_nvram_access() -
* @ha: HA context
*/
-void
-qla2x00_lock_nvram_access(scsi_qla_host_t *ha)
+static void
+qla2x00_lock_nvram_access(struct qla_hw_data *ha)
{
uint16_t data;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
* qla2x00_unlock_nvram_access() -
* @ha: HA context
*/
-void
-qla2x00_unlock_nvram_access(scsi_qla_host_t *ha)
+static void
+qla2x00_unlock_nvram_access(struct qla_hw_data *ha)
{
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
}
/**
+ * qla2x00_nv_write() - Prepare for NVRAM read/write operation.
+ * @ha: HA context
+ * @data: Serial interface selector
+ */
+static void
+qla2x00_nv_write(struct qla_hw_data *ha, uint16_t data)
+{
+ struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
+
+ WRT_REG_WORD(®->nvram, data | NVR_SELECT | NVR_WRT_ENABLE);
+ RD_REG_WORD(®->nvram); /* PCI Posting. */
+ NVRAM_DELAY();
+ WRT_REG_WORD(®->nvram, data | NVR_SELECT | NVR_CLOCK |
+ NVR_WRT_ENABLE);
+ RD_REG_WORD(®->nvram); /* PCI Posting. */
+ NVRAM_DELAY();
+ WRT_REG_WORD(®->nvram, data | NVR_SELECT | NVR_WRT_ENABLE);
+ RD_REG_WORD(®->nvram); /* PCI Posting. */
+ NVRAM_DELAY();
+}
+
+/**
+ * qla2x00_nvram_request() - Sends read command to NVRAM and gets data from
+ * NVRAM.
+ * @ha: HA context
+ * @nv_cmd: NVRAM command
+ *
+ * Bit definitions for NVRAM command:
+ *
+ * Bit 26 = start bit
+ * Bit 25, 24 = opcode
+ * Bit 23-16 = address
+ * Bit 15-0 = write data
+ *
+ * Returns the word read from nvram @addr.
+ */
+static uint16_t
+qla2x00_nvram_request(struct qla_hw_data *ha, uint32_t nv_cmd)
+{
+ uint8_t cnt;
+ struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
+ uint16_t data = 0;
+ uint16_t reg_data;
+
+ /* Send command to NVRAM. */
+ nv_cmd <<= 5;
+ for (cnt = 0; cnt < 11; cnt++) {
+ if (nv_cmd & BIT_31)
+ qla2x00_nv_write(ha, NVR_DATA_OUT);
+ else
+ qla2x00_nv_write(ha, 0);
+ nv_cmd <<= 1;
+ }
+
+ /* Read data from NVRAM. */
+ for (cnt = 0; cnt < 16; cnt++) {
+ WRT_REG_WORD(®->nvram, NVR_SELECT | NVR_CLOCK);
+ RD_REG_WORD(®->nvram); /* PCI Posting. */
+ NVRAM_DELAY();
+ data <<= 1;
+ reg_data = RD_REG_WORD(®->nvram);
+ if (reg_data & NVR_DATA_IN)
+ data |= BIT_0;
+ WRT_REG_WORD(®->nvram, NVR_SELECT);
+ RD_REG_WORD(®->nvram); /* PCI Posting. */
+ NVRAM_DELAY();
+ }
+
+ /* Deselect chip. */
+ WRT_REG_WORD(®->nvram, NVR_DESELECT);
+ RD_REG_WORD(®->nvram); /* PCI Posting. */
+ NVRAM_DELAY();
+
+ return data;
+}
+
+
+/**
* qla2x00_get_nvram_word() - Calculates word position in NVRAM and calls the
* request routine to get the word from NVRAM.
* @ha: HA context
*
* Returns the word read from nvram @addr.
*/
-uint16_t
-qla2x00_get_nvram_word(scsi_qla_host_t *ha, uint32_t addr)
+static uint16_t
+qla2x00_get_nvram_word(struct qla_hw_data *ha, uint32_t addr)
{
uint16_t data;
uint32_t nv_cmd;
}
/**
+ * qla2x00_nv_deselect() - Deselect NVRAM operations.
+ * @ha: HA context
+ */
+static void
+qla2x00_nv_deselect(struct qla_hw_data *ha)
+{
+ struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
+
+ WRT_REG_WORD(®->nvram, NVR_DESELECT);
+ RD_REG_WORD(®->nvram); /* PCI Posting. */
+ NVRAM_DELAY();
+}
+
+/**
* qla2x00_write_nvram_word() - Write NVRAM data.
* @ha: HA context
* @addr: Address in NVRAM to write
* @data: word to program
*/
-void
-qla2x00_write_nvram_word(scsi_qla_host_t *ha, uint32_t addr, uint16_t data)
+static void
+qla2x00_write_nvram_word(struct qla_hw_data *ha, uint32_t addr, uint16_t data)
{
int count;
uint16_t word;
wait_cnt = NVR_WAIT_CNT;
do {
if (!--wait_cnt) {
- DEBUG9_10(printk("%s(%ld): NVRAM didn't go ready...\n",
- __func__, ha->host_no));
+ DEBUG9_10(qla_printk(KERN_WARNING, ha,
+ "NVRAM didn't go ready...\n"));
break;
}
NVRAM_DELAY();
}
static int
-qla2x00_write_nvram_word_tmo(scsi_qla_host_t *ha, uint32_t addr, uint16_t data,
- uint32_t tmo)
+qla2x00_write_nvram_word_tmo(struct qla_hw_data *ha, uint32_t addr,
+ uint16_t data, uint32_t tmo)
{
int ret, count;
uint16_t word;
}
/**
- * qla2x00_nvram_request() - Sends read command to NVRAM and gets data from
- * NVRAM.
- * @ha: HA context
- * @nv_cmd: NVRAM command
- *
- * Bit definitions for NVRAM command:
- *
- * Bit 26 = start bit
- * Bit 25, 24 = opcode
- * Bit 23-16 = address
- * Bit 15-0 = write data
- *
- * Returns the word read from nvram @addr.
- */
-static uint16_t
-qla2x00_nvram_request(scsi_qla_host_t *ha, uint32_t nv_cmd)
-{
- uint8_t cnt;
- struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
- uint16_t data = 0;
- uint16_t reg_data;
-
- /* Send command to NVRAM. */
- nv_cmd <<= 5;
- for (cnt = 0; cnt < 11; cnt++) {
- if (nv_cmd & BIT_31)
- qla2x00_nv_write(ha, NVR_DATA_OUT);
- else
- qla2x00_nv_write(ha, 0);
- nv_cmd <<= 1;
- }
-
- /* Read data from NVRAM. */
- for (cnt = 0; cnt < 16; cnt++) {
- WRT_REG_WORD(®->nvram, NVR_SELECT | NVR_CLOCK);
- RD_REG_WORD(®->nvram); /* PCI Posting. */
- NVRAM_DELAY();
- data <<= 1;
- reg_data = RD_REG_WORD(®->nvram);
- if (reg_data & NVR_DATA_IN)
- data |= BIT_0;
- WRT_REG_WORD(®->nvram, NVR_SELECT);
- RD_REG_WORD(®->nvram); /* PCI Posting. */
- NVRAM_DELAY();
- }
-
- /* Deselect chip. */
- WRT_REG_WORD(®->nvram, NVR_DESELECT);
- RD_REG_WORD(®->nvram); /* PCI Posting. */
- NVRAM_DELAY();
-
- return (data);
-}
-
-/**
- * qla2x00_nv_write() - Clean NVRAM operations.
- * @ha: HA context
- */
-static void
-qla2x00_nv_deselect(scsi_qla_host_t *ha)
-{
- struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
-
- WRT_REG_WORD(®->nvram, NVR_DESELECT);
- RD_REG_WORD(®->nvram); /* PCI Posting. */
- NVRAM_DELAY();
-}
-
-/**
- * qla2x00_nv_write() - Prepare for NVRAM read/write operation.
- * @ha: HA context
- * @data: Serial interface selector
- */
-static void
-qla2x00_nv_write(scsi_qla_host_t *ha, uint16_t data)
-{
- struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
-
- WRT_REG_WORD(®->nvram, data | NVR_SELECT | NVR_WRT_ENABLE);
- RD_REG_WORD(®->nvram); /* PCI Posting. */
- NVRAM_DELAY();
- WRT_REG_WORD(®->nvram, data | NVR_SELECT| NVR_CLOCK |
- NVR_WRT_ENABLE);
- RD_REG_WORD(®->nvram); /* PCI Posting. */
- NVRAM_DELAY();
- WRT_REG_WORD(®->nvram, data | NVR_SELECT | NVR_WRT_ENABLE);
- RD_REG_WORD(®->nvram); /* PCI Posting. */
- NVRAM_DELAY();
-}
-
-/**
* qla2x00_clear_nvram_protection() -
* @ha: HA context
*/
static int
-qla2x00_clear_nvram_protection(scsi_qla_host_t *ha)
+qla2x00_clear_nvram_protection(struct qla_hw_data *ha)
{
int ret, stat;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
wait_cnt = NVR_WAIT_CNT;
do {
if (!--wait_cnt) {
- DEBUG9_10(printk("%s(%ld): NVRAM didn't go "
- "ready...\n", __func__,
- ha->host_no));
+ DEBUG9_10(qla_printk(KERN_WARNING, ha,
+ "NVRAM didn't go ready...\n"));
break;
}
NVRAM_DELAY();
}
static void
-qla2x00_set_nvram_protection(scsi_qla_host_t *ha, int stat)
+qla2x00_set_nvram_protection(struct qla_hw_data *ha, int stat)
{
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
uint32_t word, wait_cnt;
wait_cnt = NVR_WAIT_CNT;
do {
if (!--wait_cnt) {
- DEBUG9_10(printk("%s(%ld): NVRAM didn't go ready...\n",
- __func__, ha->host_no));
+ DEBUG9_10(qla_printk(KERN_WARNING, ha,
+ "NVRAM didn't go ready...\n"));
break;
}
NVRAM_DELAY();
/*****************************************************************************/
static inline uint32_t
-flash_conf_to_access_addr(uint32_t faddr)
+flash_conf_addr(struct qla_hw_data *ha, uint32_t faddr)
{
- return FARX_ACCESS_FLASH_CONF | faddr;
+ return ha->flash_conf_off | faddr;
}
static inline uint32_t
-flash_data_to_access_addr(uint32_t faddr)
+flash_data_addr(struct qla_hw_data *ha, uint32_t faddr)
{
- return FARX_ACCESS_FLASH_DATA | faddr;
+ return ha->flash_data_off | faddr;
}
static inline uint32_t
-nvram_conf_to_access_addr(uint32_t naddr)
+nvram_conf_addr(struct qla_hw_data *ha, uint32_t naddr)
{
- return FARX_ACCESS_NVRAM_CONF | naddr;
+ return ha->nvram_conf_off | naddr;
}
static inline uint32_t
-nvram_data_to_access_addr(uint32_t naddr)
+nvram_data_addr(struct qla_hw_data *ha, uint32_t naddr)
{
- return FARX_ACCESS_NVRAM_DATA | naddr;
+ return ha->nvram_data_off | naddr;
}
static uint32_t
-qla24xx_read_flash_dword(scsi_qla_host_t *ha, uint32_t addr)
+qla24xx_read_flash_dword(struct qla_hw_data *ha, uint32_t addr)
{
int rval;
uint32_t cnt, data;
udelay(10);
else
rval = QLA_FUNCTION_TIMEOUT;
+ cond_resched();
}
/* TODO: What happens if we time out? */
}
uint32_t *
-qla24xx_read_flash_data(scsi_qla_host_t *ha, uint32_t *dwptr, uint32_t faddr,
+qla24xx_read_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr,
uint32_t dwords)
{
uint32_t i;
+ struct qla_hw_data *ha = vha->hw;
/* Dword reads to flash. */
for (i = 0; i < dwords; i++, faddr++)
dwptr[i] = cpu_to_le32(qla24xx_read_flash_dword(ha,
- flash_data_to_access_addr(faddr)));
+ flash_data_addr(ha, faddr)));
return dwptr;
}
static int
-qla24xx_write_flash_dword(scsi_qla_host_t *ha, uint32_t addr, uint32_t data)
+qla24xx_write_flash_dword(struct qla_hw_data *ha, uint32_t addr, uint32_t data)
{
int rval;
uint32_t cnt;
udelay(10);
else
rval = QLA_FUNCTION_TIMEOUT;
+ cond_resched();
}
return rval;
}
static void
-qla24xx_get_flash_manufacturer(scsi_qla_host_t *ha, uint8_t *man_id,
+qla24xx_get_flash_manufacturer(struct qla_hw_data *ha, uint8_t *man_id,
uint8_t *flash_id)
{
uint32_t ids;
- ids = qla24xx_read_flash_dword(ha, flash_data_to_access_addr(0xd03ab));
+ ids = qla24xx_read_flash_dword(ha, flash_conf_addr(ha, 0x03ab));
*man_id = LSB(ids);
*flash_id = MSB(ids);
* Example: ATMEL 0x00 01 45 1F
* Extract MFG and Dev ID from last two bytes.
*/
- ids = qla24xx_read_flash_dword(ha,
- flash_data_to_access_addr(0xd009f));
+ ids = qla24xx_read_flash_dword(ha, flash_conf_addr(ha, 0x009f));
*man_id = LSB(ids);
*flash_id = MSB(ids);
}
}
static int
-qla24xx_write_flash_data(scsi_qla_host_t *ha, uint32_t *dwptr, uint32_t faddr,
- uint32_t dwords)
+qla2xxx_find_flt_start(scsi_qla_host_t *vha, uint32_t *start)
{
- int ret;
- uint32_t liter;
- uint32_t sec_mask, rest_addr, conf_addr, sec_end_mask;
- uint32_t fdata, findex ;
+ const char *loc, *locations[] = { "DEF", "PCI" };
+ uint32_t pcihdr, pcids;
+ uint32_t *dcode;
+ uint8_t *buf, *bcode, last_image;
+ uint16_t cnt, chksum, *wptr;
+ struct qla_flt_location *fltl;
+ struct qla_hw_data *ha = vha->hw;
+ struct req_que *req = ha->req_q_map[0];
+
+ /*
+ * FLT-location structure resides after the last PCI region.
+ */
+
+ /* Begin with sane defaults. */
+ loc = locations[0];
+ *start = 0;
+ if (IS_QLA24XX_TYPE(ha))
+ *start = FA_FLASH_LAYOUT_ADDR_24;
+ else if (IS_QLA25XX(ha))
+ *start = FA_FLASH_LAYOUT_ADDR;
+ else if (IS_QLA81XX(ha))
+ *start = FA_FLASH_LAYOUT_ADDR_81;
+ else if (IS_QLA82XX(ha)) {
+ *start = FA_FLASH_LAYOUT_ADDR_82;
+ goto end;
+ }
+ /* Begin with first PCI expansion ROM header. */
+ buf = (uint8_t *)req->ring;
+ dcode = (uint32_t *)req->ring;
+ pcihdr = 0;
+ last_image = 1;
+ do {
+ /* Verify PCI expansion ROM header. */
+ qla24xx_read_flash_data(vha, dcode, pcihdr >> 2, 0x20);
+ bcode = buf + (pcihdr % 4);
+ if (bcode[0x0] != 0x55 || bcode[0x1] != 0xaa)
+ goto end;
+
+ /* Locate PCI data structure. */
+ pcids = pcihdr + ((bcode[0x19] << 8) | bcode[0x18]);
+ qla24xx_read_flash_data(vha, dcode, pcids >> 2, 0x20);
+ bcode = buf + (pcihdr % 4);
+
+ /* Validate signature of PCI data structure. */
+ if (bcode[0x0] != 'P' || bcode[0x1] != 'C' ||
+ bcode[0x2] != 'I' || bcode[0x3] != 'R')
+ goto end;
+
+ last_image = bcode[0x15] & BIT_7;
+
+ /* Locate next PCI expansion ROM. */
+ pcihdr += ((bcode[0x11] << 8) | bcode[0x10]) * 512;
+ } while (!last_image);
+
+ /* Now verify FLT-location structure. */
+ fltl = (struct qla_flt_location *)req->ring;
+ qla24xx_read_flash_data(vha, dcode, pcihdr >> 2,
+ sizeof(struct qla_flt_location) >> 2);
+ if (fltl->sig[0] != 'Q' || fltl->sig[1] != 'F' ||
+ fltl->sig[2] != 'L' || fltl->sig[3] != 'T')
+ goto end;
+
+ wptr = (uint16_t *)req->ring;
+ cnt = sizeof(struct qla_flt_location) >> 1;
+ for (chksum = 0; cnt; cnt--)
+ chksum += le16_to_cpu(*wptr++);
+ if (chksum) {
+ qla_printk(KERN_ERR, ha,
+ "Inconsistent FLTL detected: checksum=0x%x.\n", chksum);
+ qla2x00_dump_buffer(buf, sizeof(struct qla_flt_location));
+ return QLA_FUNCTION_FAILED;
+ }
+
+ /* Good data. Use specified location. */
+ loc = locations[1];
+ *start = (le16_to_cpu(fltl->start_hi) << 16 |
+ le16_to_cpu(fltl->start_lo)) >> 2;
+end:
+ DEBUG2(qla_printk(KERN_DEBUG, ha, "FLTL[%s] = 0x%x.\n", loc, *start));
+ return QLA_SUCCESS;
+}
+
+static void
+qla2xxx_get_flt_info(scsi_qla_host_t *vha, uint32_t flt_addr)
+{
+ const char *loc, *locations[] = { "DEF", "FLT" };
+ const uint32_t def_fw[] =
+ { FA_RISC_CODE_ADDR, FA_RISC_CODE_ADDR, FA_RISC_CODE_ADDR_81 };
+ const uint32_t def_boot[] =
+ { FA_BOOT_CODE_ADDR, FA_BOOT_CODE_ADDR, FA_BOOT_CODE_ADDR_81 };
+ const uint32_t def_vpd_nvram[] =
+ { FA_VPD_NVRAM_ADDR, FA_VPD_NVRAM_ADDR, FA_VPD_NVRAM_ADDR_81 };
+ const uint32_t def_vpd0[] =
+ { 0, 0, FA_VPD0_ADDR_81 };
+ const uint32_t def_vpd1[] =
+ { 0, 0, FA_VPD1_ADDR_81 };
+ const uint32_t def_nvram0[] =
+ { 0, 0, FA_NVRAM0_ADDR_81 };
+ const uint32_t def_nvram1[] =
+ { 0, 0, FA_NVRAM1_ADDR_81 };
+ const uint32_t def_fdt[] =
+ { FA_FLASH_DESCR_ADDR_24, FA_FLASH_DESCR_ADDR,
+ FA_FLASH_DESCR_ADDR_81 };
+ const uint32_t def_npiv_conf0[] =
+ { FA_NPIV_CONF0_ADDR_24, FA_NPIV_CONF0_ADDR,
+ FA_NPIV_CONF0_ADDR_81 };
+ const uint32_t def_npiv_conf1[] =
+ { FA_NPIV_CONF1_ADDR_24, FA_NPIV_CONF1_ADDR,
+ FA_NPIV_CONF1_ADDR_81 };
+ const uint32_t fcp_prio_cfg0[] =
+ { FA_FCP_PRIO0_ADDR, FA_FCP_PRIO0_ADDR_25,
+ 0 };
+ const uint32_t fcp_prio_cfg1[] =
+ { FA_FCP_PRIO1_ADDR, FA_FCP_PRIO1_ADDR_25,
+ 0 };
+ uint32_t def;
+ uint16_t *wptr;
+ uint16_t cnt, chksum;
+ uint32_t start;
+ struct qla_flt_header *flt;
+ struct qla_flt_region *region;
+ struct qla_hw_data *ha = vha->hw;
+ struct req_que *req = ha->req_q_map[0];
+
+ ha->flt_region_flt = flt_addr;
+ wptr = (uint16_t *)req->ring;
+ flt = (struct qla_flt_header *)req->ring;
+ region = (struct qla_flt_region *)&flt[1];
+ ha->isp_ops->read_optrom(vha, (uint8_t *)req->ring,
+ flt_addr << 2, OPTROM_BURST_SIZE);
+ if (*wptr == __constant_cpu_to_le16(0xffff))
+ goto no_flash_data;
+ if (flt->version != __constant_cpu_to_le16(1)) {
+ DEBUG2(qla_printk(KERN_INFO, ha, "Unsupported FLT detected: "
+ "version=0x%x length=0x%x checksum=0x%x.\n",
+ le16_to_cpu(flt->version), le16_to_cpu(flt->length),
+ le16_to_cpu(flt->checksum)));
+ goto no_flash_data;
+ }
+
+ cnt = (sizeof(struct qla_flt_header) + le16_to_cpu(flt->length)) >> 1;
+ for (chksum = 0; cnt; cnt--)
+ chksum += le16_to_cpu(*wptr++);
+ if (chksum) {
+ DEBUG2(qla_printk(KERN_INFO, ha, "Inconsistent FLT detected: "
+ "version=0x%x length=0x%x checksum=0x%x.\n",
+ le16_to_cpu(flt->version), le16_to_cpu(flt->length),
+ chksum));
+ goto no_flash_data;
+ }
+
+ loc = locations[1];
+ cnt = le16_to_cpu(flt->length) / sizeof(struct qla_flt_region);
+ for ( ; cnt; cnt--, region++) {
+ /* Store addresses as DWORD offsets. */
+ start = le32_to_cpu(region->start) >> 2;
+
+ DEBUG3(qla_printk(KERN_DEBUG, ha, "FLT[%02x]: start=0x%x "
+ "end=0x%x size=0x%x.\n", le32_to_cpu(region->code), start,
+ le32_to_cpu(region->end) >> 2, le32_to_cpu(region->size)));
+
+ switch (le32_to_cpu(region->code) & 0xff) {
+ case FLT_REG_FW:
+ ha->flt_region_fw = start;
+ break;
+ case FLT_REG_BOOT_CODE:
+ ha->flt_region_boot = start;
+ break;
+ case FLT_REG_VPD_0:
+ ha->flt_region_vpd_nvram = start;
+ if (IS_QLA82XX(ha))
+ break;
+ if (ha->flags.port0)
+ ha->flt_region_vpd = start;
+ break;
+ case FLT_REG_VPD_1:
+ if (IS_QLA82XX(ha))
+ break;
+ if (!ha->flags.port0)
+ ha->flt_region_vpd = start;
+ break;
+ case FLT_REG_NVRAM_0:
+ if (ha->flags.port0)
+ ha->flt_region_nvram = start;
+ break;
+ case FLT_REG_NVRAM_1:
+ if (!ha->flags.port0)
+ ha->flt_region_nvram = start;
+ break;
+ case FLT_REG_FDT:
+ ha->flt_region_fdt = start;
+ break;
+ case FLT_REG_NPIV_CONF_0:
+ if (ha->flags.port0)
+ ha->flt_region_npiv_conf = start;
+ break;
+ case FLT_REG_NPIV_CONF_1:
+ if (!ha->flags.port0)
+ ha->flt_region_npiv_conf = start;
+ break;
+ case FLT_REG_GOLD_FW:
+ ha->flt_region_gold_fw = start;
+ break;
+ case FLT_REG_FCP_PRIO_0:
+ if (ha->flags.port0)
+ ha->flt_region_fcp_prio = start;
+ break;
+ case FLT_REG_FCP_PRIO_1:
+ if (!ha->flags.port0)
+ ha->flt_region_fcp_prio = start;
+ break;
+ case FLT_REG_BOOT_CODE_82XX:
+ ha->flt_region_boot = start;
+ break;
+ case FLT_REG_FW_82XX:
+ ha->flt_region_fw = start;
+ break;
+ case FLT_REG_GOLD_FW_82XX:
+ ha->flt_region_gold_fw = start;
+ break;
+ case FLT_REG_BOOTLOAD_82XX:
+ ha->flt_region_bootload = start;
+ break;
+ case FLT_REG_VPD_82XX:
+ ha->flt_region_vpd = start;
+ break;
+ }
+ }
+ goto done;
+
+no_flash_data:
+ /* Use hardcoded defaults. */
+ loc = locations[0];
+ def = 0;
+ if (IS_QLA24XX_TYPE(ha))
+ def = 0;
+ else if (IS_QLA25XX(ha))
+ def = 1;
+ else if (IS_QLA81XX(ha))
+ def = 2;
+ ha->flt_region_fw = def_fw[def];
+ ha->flt_region_boot = def_boot[def];
+ ha->flt_region_vpd_nvram = def_vpd_nvram[def];
+ ha->flt_region_vpd = ha->flags.port0 ?
+ def_vpd0[def] : def_vpd1[def];
+ ha->flt_region_nvram = ha->flags.port0 ?
+ def_nvram0[def] : def_nvram1[def];
+ ha->flt_region_fdt = def_fdt[def];
+ ha->flt_region_npiv_conf = ha->flags.port0 ?
+ def_npiv_conf0[def] : def_npiv_conf1[def];
+ ha->flt_region_fcp_prio = ha->flags.port0 ?
+ fcp_prio_cfg0[def] : fcp_prio_cfg1[def];
+done:
+ DEBUG2(qla_printk(KERN_DEBUG, ha, "FLT[%s]: boot=0x%x fw=0x%x "
+ "vpd_nvram=0x%x vpd=0x%x nvram=0x%x fdt=0x%x flt=0x%x "
+ "npiv=0x%x.\n", loc, ha->flt_region_boot, ha->flt_region_fw,
+ ha->flt_region_vpd_nvram, ha->flt_region_vpd, ha->flt_region_nvram,
+ ha->flt_region_fdt, ha->flt_region_flt, ha->flt_region_npiv_conf));
+}
+
+static void
+qla2xxx_get_fdt_info(scsi_qla_host_t *vha)
+{
+#define FLASH_BLK_SIZE_4K 0x1000
+#define FLASH_BLK_SIZE_32K 0x8000
+#define FLASH_BLK_SIZE_64K 0x10000
+ const char *loc, *locations[] = { "MID", "FDT" };
+ uint16_t cnt, chksum;
+ uint16_t *wptr;
+ struct qla_fdt_layout *fdt;
uint8_t man_id, flash_id;
+ uint16_t mid = 0, fid = 0;
+ struct qla_hw_data *ha = vha->hw;
+ struct req_que *req = ha->req_q_map[0];
+
+ wptr = (uint16_t *)req->ring;
+ fdt = (struct qla_fdt_layout *)req->ring;
+ ha->isp_ops->read_optrom(vha, (uint8_t *)req->ring,
+ ha->flt_region_fdt << 2, OPTROM_BURST_SIZE);
+ if (*wptr == __constant_cpu_to_le16(0xffff))
+ goto no_flash_data;
+ if (fdt->sig[0] != 'Q' || fdt->sig[1] != 'L' || fdt->sig[2] != 'I' ||
+ fdt->sig[3] != 'D')
+ goto no_flash_data;
+
+ for (cnt = 0, chksum = 0; cnt < sizeof(struct qla_fdt_layout) >> 1;
+ cnt++)
+ chksum += le16_to_cpu(*wptr++);
+ if (chksum) {
+ DEBUG2(qla_printk(KERN_INFO, ha, "Inconsistent FDT detected: "
+ "checksum=0x%x id=%c version=0x%x.\n", chksum, fdt->sig[0],
+ le16_to_cpu(fdt->version)));
+ DEBUG9(qla2x00_dump_buffer((uint8_t *)fdt, sizeof(*fdt)));
+ goto no_flash_data;
+ }
+
+ loc = locations[1];
+ mid = le16_to_cpu(fdt->man_id);
+ fid = le16_to_cpu(fdt->id);
+ ha->fdt_wrt_disable = fdt->wrt_disable_bits;
+ ha->fdt_erase_cmd = flash_conf_addr(ha, 0x0300 | fdt->erase_cmd);
+ ha->fdt_block_size = le32_to_cpu(fdt->block_size);
+ if (fdt->unprotect_sec_cmd) {
+ ha->fdt_unprotect_sec_cmd = flash_conf_addr(ha, 0x0300 |
+ fdt->unprotect_sec_cmd);
+ ha->fdt_protect_sec_cmd = fdt->protect_sec_cmd ?
+ flash_conf_addr(ha, 0x0300 | fdt->protect_sec_cmd):
+ flash_conf_addr(ha, 0x0336);
+ }
+ goto done;
+no_flash_data:
+ loc = locations[0];
+ if (IS_QLA82XX(ha)) {
+ ha->fdt_block_size = FLASH_BLK_SIZE_64K;
+ goto done;
+ }
+ qla24xx_get_flash_manufacturer(ha, &man_id, &flash_id);
+ mid = man_id;
+ fid = flash_id;
+ ha->fdt_wrt_disable = 0x9c;
+ ha->fdt_erase_cmd = flash_conf_addr(ha, 0x03d8);
+ switch (man_id) {
+ case 0xbf: /* STT flash. */
+ if (flash_id == 0x8e)
+ ha->fdt_block_size = FLASH_BLK_SIZE_64K;
+ else
+ ha->fdt_block_size = FLASH_BLK_SIZE_32K;
+
+ if (flash_id == 0x80)
+ ha->fdt_erase_cmd = flash_conf_addr(ha, 0x0352);
+ break;
+ case 0x13: /* ST M25P80. */
+ ha->fdt_block_size = FLASH_BLK_SIZE_64K;
+ break;
+ case 0x1f: /* Atmel 26DF081A. */
+ ha->fdt_block_size = FLASH_BLK_SIZE_4K;
+ ha->fdt_erase_cmd = flash_conf_addr(ha, 0x0320);
+ ha->fdt_unprotect_sec_cmd = flash_conf_addr(ha, 0x0339);
+ ha->fdt_protect_sec_cmd = flash_conf_addr(ha, 0x0336);
+ break;
+ default:
+ /* Default to 64 kb sector size. */
+ ha->fdt_block_size = FLASH_BLK_SIZE_64K;
+ break;
+ }
+done:
+ DEBUG2(qla_printk(KERN_DEBUG, ha, "FDT[%s]: (0x%x/0x%x) erase=0x%x "
+ "pro=%x upro=%x wrtd=0x%x blk=0x%x.\n", loc, mid, fid,
+ ha->fdt_erase_cmd, ha->fdt_protect_sec_cmd,
+ ha->fdt_unprotect_sec_cmd, ha->fdt_wrt_disable,
+ ha->fdt_block_size));
+}
+
+static void
+qla2xxx_get_idc_param(scsi_qla_host_t *vha)
+{
+#define QLA82XX_IDC_PARAM_ADDR 0x003e885c
+ uint32_t *wptr;
+ struct qla_hw_data *ha = vha->hw;
+ struct req_que *req = ha->req_q_map[0];
+
+ if (!IS_QLA82XX(ha))
+ return;
+
+ wptr = (uint32_t *)req->ring;
+ ha->isp_ops->read_optrom(vha, (uint8_t *)req->ring,
+ QLA82XX_IDC_PARAM_ADDR , 8);
+
+ if (*wptr == __constant_cpu_to_le32(0xffffffff)) {
+ ha->nx_dev_init_timeout = QLA82XX_ROM_DEV_INIT_TIMEOUT;
+ ha->nx_reset_timeout = QLA82XX_ROM_DRV_RESET_ACK_TIMEOUT;
+ } else {
+ ha->nx_dev_init_timeout = le32_to_cpu(*wptr++);
+ ha->nx_reset_timeout = le32_to_cpu(*wptr);
+ }
+ return;
+}
+
+int
+qla2xxx_get_flash_info(scsi_qla_host_t *vha)
+{
+ int ret;
+ uint32_t flt_addr;
+ struct qla_hw_data *ha = vha->hw;
+
+ if (!IS_QLA24XX_TYPE(ha) && !IS_QLA25XX(ha) && !IS_QLA8XXX_TYPE(ha))
+ return QLA_SUCCESS;
+
+ ret = qla2xxx_find_flt_start(vha, &flt_addr);
+ if (ret != QLA_SUCCESS)
+ return ret;
+
+ qla2xxx_get_flt_info(vha, flt_addr);
+ qla2xxx_get_fdt_info(vha);
+ qla2xxx_get_idc_param(vha);
+
+ return QLA_SUCCESS;
+}
+
+void
+qla2xxx_flash_npiv_conf(scsi_qla_host_t *vha)
+{
+#define NPIV_CONFIG_SIZE (16*1024)
+ void *data;
+ uint16_t *wptr;
+ uint16_t cnt, chksum;
+ int i;
+ struct qla_npiv_header hdr;
+ struct qla_npiv_entry *entry;
+ struct qla_hw_data *ha = vha->hw;
+
+ if (!IS_QLA24XX_TYPE(ha) && !IS_QLA25XX(ha) && !IS_QLA8XXX_TYPE(ha))
+ return;
+
+ ha->isp_ops->read_optrom(vha, (uint8_t *)&hdr,
+ ha->flt_region_npiv_conf << 2, sizeof(struct qla_npiv_header));
+ if (hdr.version == __constant_cpu_to_le16(0xffff))
+ return;
+ if (hdr.version != __constant_cpu_to_le16(1)) {
+ DEBUG2(qla_printk(KERN_INFO, ha, "Unsupported NPIV-Config "
+ "detected: version=0x%x entries=0x%x checksum=0x%x.\n",
+ le16_to_cpu(hdr.version), le16_to_cpu(hdr.entries),
+ le16_to_cpu(hdr.checksum)));
+ return;
+ }
+
+ data = kmalloc(NPIV_CONFIG_SIZE, GFP_KERNEL);
+ if (!data) {
+ DEBUG2(qla_printk(KERN_INFO, ha, "NPIV-Config: Unable to "
+ "allocate memory.\n"));
+ return;
+ }
+
+ ha->isp_ops->read_optrom(vha, (uint8_t *)data,
+ ha->flt_region_npiv_conf << 2, NPIV_CONFIG_SIZE);
+
+ cnt = (sizeof(struct qla_npiv_header) + le16_to_cpu(hdr.entries) *
+ sizeof(struct qla_npiv_entry)) >> 1;
+ for (wptr = data, chksum = 0; cnt; cnt--)
+ chksum += le16_to_cpu(*wptr++);
+ if (chksum) {
+ DEBUG2(qla_printk(KERN_INFO, ha, "Inconsistent NPIV-Config "
+ "detected: version=0x%x entries=0x%x checksum=0x%x.\n",
+ le16_to_cpu(hdr.version), le16_to_cpu(hdr.entries),
+ chksum));
+ goto done;
+ }
+
+ entry = data + sizeof(struct qla_npiv_header);
+ cnt = le16_to_cpu(hdr.entries);
+ for (i = 0; cnt; cnt--, entry++, i++) {
+ uint16_t flags;
+ struct fc_vport_identifiers vid;
+ struct fc_vport *vport;
+
+ memcpy(&ha->npiv_info[i], entry, sizeof(struct qla_npiv_entry));
+
+ flags = le16_to_cpu(entry->flags);
+ if (flags == 0xffff)
+ continue;
+ if ((flags & BIT_0) == 0)
+ continue;
+
+ memset(&vid, 0, sizeof(vid));
+ vid.roles = FC_PORT_ROLE_FCP_INITIATOR;
+ vid.vport_type = FC_PORTTYPE_NPIV;
+ vid.disable = false;
+ vid.port_name = wwn_to_u64(entry->port_name);
+ vid.node_name = wwn_to_u64(entry->node_name);
+
+ DEBUG2(qla_printk(KERN_INFO, ha, "NPIV[%02x]: wwpn=%llx "
+ "wwnn=%llx vf_id=0x%x Q_qos=0x%x F_qos=0x%x.\n", cnt,
+ (unsigned long long)vid.port_name,
+ (unsigned long long)vid.node_name,
+ le16_to_cpu(entry->vf_id),
+ entry->q_qos, entry->f_qos));
+
+ if (i < QLA_PRECONFIG_VPORTS) {
+ vport = fc_vport_create(vha->host, 0, &vid);
+ if (!vport)
+ qla_printk(KERN_INFO, ha,
+ "NPIV-Config: Failed to create vport [%02x]: "
+ "wwpn=%llx wwnn=%llx.\n", cnt,
+ (unsigned long long)vid.port_name,
+ (unsigned long long)vid.node_name);
+ }
+ }
+done:
+ kfree(data);
+}
+
+static int
+qla24xx_unprotect_flash(scsi_qla_host_t *vha)
+{
+ struct qla_hw_data *ha = vha->hw;
struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
- ret = QLA_SUCCESS;
+ if (ha->flags.fac_supported)
+ return qla81xx_fac_do_write_enable(vha, 1);
- qla24xx_get_flash_manufacturer(ha, &man_id, &flash_id);
- DEBUG9(printk("%s(%ld): Flash man_id=%d flash_id=%d\n", __func__,
- ha->host_no, man_id, flash_id));
+ /* Enable flash write. */
+ WRT_REG_DWORD(®->ctrl_status,
+ RD_REG_DWORD(®->ctrl_status) | CSRX_FLASH_ENABLE);
+ RD_REG_DWORD(®->ctrl_status); /* PCI Posting. */
+
+ if (!ha->fdt_wrt_disable)
+ goto done;
+
+ /* Disable flash write-protection, first clear SR protection bit */
+ qla24xx_write_flash_dword(ha, flash_conf_addr(ha, 0x101), 0);
+ /* Then write zero again to clear remaining SR bits.*/
+ qla24xx_write_flash_dword(ha, flash_conf_addr(ha, 0x101), 0);
+done:
+ return QLA_SUCCESS;
+}
+
+static int
+qla24xx_protect_flash(scsi_qla_host_t *vha)
+{
+ uint32_t cnt;
+ struct qla_hw_data *ha = vha->hw;
+ struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
+
+ if (ha->flags.fac_supported)
+ return qla81xx_fac_do_write_enable(vha, 0);
+
+ if (!ha->fdt_wrt_disable)
+ goto skip_wrt_protect;
+
+ /* Enable flash write-protection and wait for completion. */
+ qla24xx_write_flash_dword(ha, flash_conf_addr(ha, 0x101),
+ ha->fdt_wrt_disable);
+ for (cnt = 300; cnt &&
+ qla24xx_read_flash_dword(ha, flash_conf_addr(ha, 0x005)) & BIT_0;
+ cnt--) {
+ udelay(10);
+ }
+
+skip_wrt_protect:
+ /* Disable flash write. */
+ WRT_REG_DWORD(®->ctrl_status,
+ RD_REG_DWORD(®->ctrl_status) & ~CSRX_FLASH_ENABLE);
+ RD_REG_DWORD(®->ctrl_status); /* PCI Posting. */
+
+ return QLA_SUCCESS;
+}
+
+static int
+qla24xx_erase_sector(scsi_qla_host_t *vha, uint32_t fdata)
+{
+ struct qla_hw_data *ha = vha->hw;
+ uint32_t start, finish;
+
+ if (ha->flags.fac_supported) {
+ start = fdata >> 2;
+ finish = start + (ha->fdt_block_size >> 2) - 1;
+ return qla81xx_fac_erase_sector(vha, flash_data_addr(ha,
+ start), flash_data_addr(ha, finish));
+ }
+
+ return qla24xx_write_flash_dword(ha, ha->fdt_erase_cmd,
+ (fdata & 0xff00) | ((fdata << 16) & 0xff0000) |
+ ((fdata >> 16) & 0xff));
+}
- sec_end_mask = 0;
- conf_addr = flash_conf_to_access_addr(0x03d8);
- switch (man_id) {
- case 0xbf: /* STT flash. */
- rest_addr = 0x1fff;
- sec_mask = 0x3e000;
- if (flash_id == 0x80)
- conf_addr = flash_conf_to_access_addr(0x0352);
- break;
- case 0x13: /* ST M25P80. */
- rest_addr = 0x3fff;
- sec_mask = 0x3c000;
- break;
- case 0x1f: // Atmel 26DF081A
- rest_addr = 0x0fff;
- sec_mask = 0xff000;
- sec_end_mask = 0x003ff;
- conf_addr = flash_conf_to_access_addr(0x0320);
- break;
- default:
- /* Default to 64 kb sector size. */
- rest_addr = 0x3fff;
- sec_mask = 0x3c000;
- break;
+static int
+qla24xx_write_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr,
+ uint32_t dwords)
+{
+ int ret;
+ uint32_t liter;
+ uint32_t sec_mask, rest_addr;
+ uint32_t fdata;
+ dma_addr_t optrom_dma;
+ void *optrom = NULL;
+ struct qla_hw_data *ha = vha->hw;
+
+ /* Prepare burst-capable write on supported ISPs. */
+ if ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && !(faddr & 0xfff) &&
+ dwords > OPTROM_BURST_DWORDS) {
+ optrom = dma_alloc_coherent(&ha->pdev->dev, OPTROM_BURST_SIZE,
+ &optrom_dma, GFP_KERNEL);
+ if (!optrom) {
+ qla_printk(KERN_DEBUG, ha,
+ "Unable to allocate memory for optrom burst write "
+ "(%x KB).\n", OPTROM_BURST_SIZE / 1024);
+ }
}
- /* Enable flash write. */
- WRT_REG_DWORD(®->ctrl_status,
- RD_REG_DWORD(®->ctrl_status) | CSRX_FLASH_ENABLE);
- RD_REG_DWORD(®->ctrl_status); /* PCI Posting. */
+ rest_addr = (ha->fdt_block_size >> 2) - 1;
+ sec_mask = ~rest_addr;
- /* Disable flash write-protection. */
- qla24xx_write_flash_dword(ha, flash_conf_to_access_addr(0x101), 0);
- /* Some flash parts need an additional zero-write to clear bits.*/
- qla24xx_write_flash_dword(ha, flash_conf_to_access_addr(0x101), 0);
+ ret = qla24xx_unprotect_flash(vha);
+ if (ret != QLA_SUCCESS) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to unprotect flash for update.\n");
+ goto done;
+ }
- do { /* Loop once to provide quick error exit. */
- for (liter = 0; liter < dwords; liter++, faddr++, dwptr++) {
- if (man_id == 0x1f) {
- findex = faddr << 2;
- fdata = findex & sec_mask;
- } else {
- findex = faddr;
- fdata = (findex & sec_mask) << 2;
- }
+ for (liter = 0; liter < dwords; liter++, faddr++, dwptr++) {
+ fdata = (faddr & sec_mask) << 2;
- /* Are we at the beginning of a sector? */
- if ((findex & rest_addr) == 0) {
- /*
- * Do sector unprotect at 4K boundry for Atmel
- * part.
- */
- if (man_id == 0x1f)
- qla24xx_write_flash_dword(ha,
- flash_conf_to_access_addr(0x0339),
- (fdata & 0xff00) | ((fdata << 16) &
- 0xff0000) | ((fdata >> 16) & 0xff));
- fdata = (faddr & sec_mask) << 2;
- ret = qla24xx_write_flash_dword(ha, conf_addr,
- (fdata & 0xff00) |((fdata << 16) &
+ /* Are we at the beginning of a sector? */
+ if ((faddr & rest_addr) == 0) {
+ /* Do sector unprotect. */
+ if (ha->fdt_unprotect_sec_cmd)
+ qla24xx_write_flash_dword(ha,
+ ha->fdt_unprotect_sec_cmd,
+ (fdata & 0xff00) | ((fdata << 16) &
0xff0000) | ((fdata >> 16) & 0xff));
- if (ret != QLA_SUCCESS) {
- DEBUG9(printk("%s(%ld) Unable to flash "
- "sector: address=%x.\n", __func__,
- ha->host_no, faddr));
- break;
- }
- }
- ret = qla24xx_write_flash_dword(ha,
- flash_data_to_access_addr(faddr),
- cpu_to_le32(*dwptr));
+ ret = qla24xx_erase_sector(vha, fdata);
if (ret != QLA_SUCCESS) {
- DEBUG9(printk("%s(%ld) Unable to program flash "
- "address=%x data=%x.\n", __func__,
- ha->host_no, faddr, *dwptr));
+ DEBUG9(qla_printk(KERN_WARNING, ha,
+ "Unable to erase sector: address=%x.\n",
+ faddr));
break;
}
+ }
+
+ /* Go with burst-write. */
+ if (optrom && (liter + OPTROM_BURST_DWORDS) <= dwords) {
+ /* Copy data to DMA'ble buffer. */
+ memcpy(optrom, dwptr, OPTROM_BURST_SIZE);
+
+ ret = qla2x00_load_ram(vha, optrom_dma,
+ flash_data_addr(ha, faddr),
+ OPTROM_BURST_DWORDS);
+ if (ret != QLA_SUCCESS) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to burst-write optrom segment "
+ "(%x/%x/%llx).\n", ret,
+ flash_data_addr(ha, faddr),
+ (unsigned long long)optrom_dma);
+ qla_printk(KERN_WARNING, ha,
+ "Reverting to slow-write.\n");
+
+ dma_free_coherent(&ha->pdev->dev,
+ OPTROM_BURST_SIZE, optrom, optrom_dma);
+ optrom = NULL;
+ } else {
+ liter += OPTROM_BURST_DWORDS - 1;
+ faddr += OPTROM_BURST_DWORDS - 1;
+ dwptr += OPTROM_BURST_DWORDS - 1;
+ continue;
+ }
+ }
- /* Do sector protect at 4K boundry for Atmel part. */
- if (man_id == 0x1f &&
- ((faddr & sec_end_mask) == 0x3ff))
- qla24xx_write_flash_dword(ha,
- flash_conf_to_access_addr(0x0336),
- (fdata & 0xff00) | ((fdata << 16) &
- 0xff0000) | ((fdata >> 16) & 0xff));
+ ret = qla24xx_write_flash_dword(ha,
+ flash_data_addr(ha, faddr), cpu_to_le32(*dwptr));
+ if (ret != QLA_SUCCESS) {
+ DEBUG9(printk("%s(%ld) Unable to program flash "
+ "address=%x data=%x.\n", __func__,
+ vha->host_no, faddr, *dwptr));
+ break;
}
- } while (0);
- /* Enable flash write-protection. */
- qla24xx_write_flash_dword(ha, flash_conf_to_access_addr(0x101), 0x9c);
+ /* Do sector protect. */
+ if (ha->fdt_unprotect_sec_cmd &&
+ ((faddr & rest_addr) == rest_addr))
+ qla24xx_write_flash_dword(ha,
+ ha->fdt_protect_sec_cmd,
+ (fdata & 0xff00) | ((fdata << 16) &
+ 0xff0000) | ((fdata >> 16) & 0xff));
+ }
- /* Disable flash write. */
- WRT_REG_DWORD(®->ctrl_status,
- RD_REG_DWORD(®->ctrl_status) & ~CSRX_FLASH_ENABLE);
- RD_REG_DWORD(®->ctrl_status); /* PCI Posting. */
+ ret = qla24xx_protect_flash(vha);
+ if (ret != QLA_SUCCESS)
+ qla_printk(KERN_WARNING, ha,
+ "Unable to protect flash after update.\n");
+done:
+ if (optrom)
+ dma_free_coherent(&ha->pdev->dev,
+ OPTROM_BURST_SIZE, optrom, optrom_dma);
return ret;
}
uint8_t *
-qla2x00_read_nvram_data(scsi_qla_host_t *ha, uint8_t *buf, uint32_t naddr,
+qla2x00_read_nvram_data(scsi_qla_host_t *vha, uint8_t *buf, uint32_t naddr,
uint32_t bytes)
{
uint32_t i;
uint16_t *wptr;
+ struct qla_hw_data *ha = vha->hw;
/* Word reads to NVRAM via registers. */
wptr = (uint16_t *)buf;
}
uint8_t *
-qla24xx_read_nvram_data(scsi_qla_host_t *ha, uint8_t *buf, uint32_t naddr,
+qla24xx_read_nvram_data(scsi_qla_host_t *vha, uint8_t *buf, uint32_t naddr,
uint32_t bytes)
{
uint32_t i;
uint32_t *dwptr;
+ struct qla_hw_data *ha = vha->hw;
+
+ if (IS_QLA82XX(ha))
+ return buf;
/* Dword reads to flash. */
dwptr = (uint32_t *)buf;
for (i = 0; i < bytes >> 2; i++, naddr++)
dwptr[i] = cpu_to_le32(qla24xx_read_flash_dword(ha,
- nvram_data_to_access_addr(naddr)));
+ nvram_data_addr(ha, naddr)));
return buf;
}
int
-qla2x00_write_nvram_data(scsi_qla_host_t *ha, uint8_t *buf, uint32_t naddr,
+qla2x00_write_nvram_data(scsi_qla_host_t *vha, uint8_t *buf, uint32_t naddr,
uint32_t bytes)
{
int ret, stat;
uint32_t i;
uint16_t *wptr;
+ unsigned long flags;
+ struct qla_hw_data *ha = vha->hw;
ret = QLA_SUCCESS;
+ spin_lock_irqsave(&ha->hardware_lock, flags);
qla2x00_lock_nvram_access(ha);
/* Disable NVRAM write-protection. */
qla2x00_set_nvram_protection(ha, stat);
qla2x00_unlock_nvram_access(ha);
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
return ret;
}
int
-qla24xx_write_nvram_data(scsi_qla_host_t *ha, uint8_t *buf, uint32_t naddr,
+qla24xx_write_nvram_data(scsi_qla_host_t *vha, uint8_t *buf, uint32_t naddr,
uint32_t bytes)
{
int ret;
uint32_t i;
uint32_t *dwptr;
+ struct qla_hw_data *ha = vha->hw;
struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
ret = QLA_SUCCESS;
+ if (IS_QLA82XX(ha))
+ return ret;
+
/* Enable flash write. */
WRT_REG_DWORD(®->ctrl_status,
RD_REG_DWORD(®->ctrl_status) | CSRX_FLASH_ENABLE);
RD_REG_DWORD(®->ctrl_status); /* PCI Posting. */
/* Disable NVRAM write-protection. */
- qla24xx_write_flash_dword(ha, nvram_conf_to_access_addr(0x101),
- 0);
- qla24xx_write_flash_dword(ha, nvram_conf_to_access_addr(0x101),
- 0);
+ qla24xx_write_flash_dword(ha, nvram_conf_addr(ha, 0x101), 0);
+ qla24xx_write_flash_dword(ha, nvram_conf_addr(ha, 0x101), 0);
/* Dword writes to flash. */
dwptr = (uint32_t *)buf;
for (i = 0; i < bytes >> 2; i++, naddr++, dwptr++) {
ret = qla24xx_write_flash_dword(ha,
- nvram_data_to_access_addr(naddr),
- cpu_to_le32(*dwptr));
+ nvram_data_addr(ha, naddr), cpu_to_le32(*dwptr));
if (ret != QLA_SUCCESS) {
- DEBUG9(printk("%s(%ld) Unable to program "
- "nvram address=%x data=%x.\n", __func__,
- ha->host_no, naddr, *dwptr));
+ DEBUG9(qla_printk(KERN_WARNING, ha,
+ "Unable to program nvram address=%x data=%x.\n",
+ naddr, *dwptr));
break;
}
}
/* Enable NVRAM write-protection. */
- qla24xx_write_flash_dword(ha, nvram_conf_to_access_addr(0x101),
- 0x8c);
+ qla24xx_write_flash_dword(ha, nvram_conf_addr(ha, 0x101), 0x8c);
/* Disable flash write. */
WRT_REG_DWORD(®->ctrl_status,
return ret;
}
+uint8_t *
+qla25xx_read_nvram_data(scsi_qla_host_t *vha, uint8_t *buf, uint32_t naddr,
+ uint32_t bytes)
+{
+ uint32_t i;
+ uint32_t *dwptr;
+ struct qla_hw_data *ha = vha->hw;
+
+ /* Dword reads to flash. */
+ dwptr = (uint32_t *)buf;
+ for (i = 0; i < bytes >> 2; i++, naddr++)
+ dwptr[i] = cpu_to_le32(qla24xx_read_flash_dword(ha,
+ flash_data_addr(ha, ha->flt_region_vpd_nvram | naddr)));
+
+ return buf;
+}
+
+int
+qla25xx_write_nvram_data(scsi_qla_host_t *vha, uint8_t *buf, uint32_t naddr,
+ uint32_t bytes)
+{
+ struct qla_hw_data *ha = vha->hw;
+#define RMW_BUFFER_SIZE (64 * 1024)
+ uint8_t *dbuf;
+
+ dbuf = vmalloc(RMW_BUFFER_SIZE);
+ if (!dbuf)
+ return QLA_MEMORY_ALLOC_FAILED;
+ ha->isp_ops->read_optrom(vha, dbuf, ha->flt_region_vpd_nvram << 2,
+ RMW_BUFFER_SIZE);
+ memcpy(dbuf + (naddr << 2), buf, bytes);
+ ha->isp_ops->write_optrom(vha, dbuf, ha->flt_region_vpd_nvram << 2,
+ RMW_BUFFER_SIZE);
+ vfree(dbuf);
+
+ return QLA_SUCCESS;
+}
static inline void
-qla2x00_flip_colors(scsi_qla_host_t *ha, uint16_t *pflags)
+qla2x00_flip_colors(struct qla_hw_data *ha, uint16_t *pflags)
{
if (IS_QLA2322(ha)) {
/* Flip all colors. */
}
}
+#define PIO_REG(h, r) ((h)->pio_address + offsetof(struct device_reg_2xxx, r))
+
void
-qla2x00_beacon_blink(struct scsi_qla_host *ha)
+qla2x00_beacon_blink(struct scsi_qla_host *vha)
{
uint16_t gpio_enable;
uint16_t gpio_data;
uint16_t led_color = 0;
unsigned long flags;
+ struct qla_hw_data *ha = vha->hw;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
- if (ha->pio_address)
- reg = (struct device_reg_2xxx __iomem *)ha->pio_address;
+ if (IS_QLA82XX(ha))
+ return;
spin_lock_irqsave(&ha->hardware_lock, flags);
/* Save the Original GPIOE. */
if (ha->pio_address) {
- gpio_enable = RD_REG_WORD_PIO(®->gpioe);
- gpio_data = RD_REG_WORD_PIO(®->gpiod);
+ gpio_enable = RD_REG_WORD_PIO(PIO_REG(ha, gpioe));
+ gpio_data = RD_REG_WORD_PIO(PIO_REG(ha, gpiod));
} else {
gpio_enable = RD_REG_WORD(®->gpioe);
gpio_data = RD_REG_WORD(®->gpiod);
gpio_enable |= GPIO_LED_MASK;
if (ha->pio_address) {
- WRT_REG_WORD_PIO(®->gpioe, gpio_enable);
+ WRT_REG_WORD_PIO(PIO_REG(ha, gpioe), gpio_enable);
} else {
WRT_REG_WORD(®->gpioe, gpio_enable);
RD_REG_WORD(®->gpioe);
/* Set the modified gpio_data values */
if (ha->pio_address) {
- WRT_REG_WORD_PIO(®->gpiod, gpio_data);
+ WRT_REG_WORD_PIO(PIO_REG(ha, gpiod), gpio_data);
} else {
WRT_REG_WORD(®->gpiod, gpio_data);
RD_REG_WORD(®->gpiod);
}
int
-qla2x00_beacon_on(struct scsi_qla_host *ha)
+qla2x00_beacon_on(struct scsi_qla_host *vha)
{
uint16_t gpio_enable;
uint16_t gpio_data;
unsigned long flags;
+ struct qla_hw_data *ha = vha->hw;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
ha->fw_options[1] &= ~FO1_SET_EMPHASIS_SWING;
ha->fw_options[1] |= FO1_DISABLE_GPIO6_7;
- if (qla2x00_set_fw_options(ha, ha->fw_options) != QLA_SUCCESS) {
+ if (qla2x00_set_fw_options(vha, ha->fw_options) != QLA_SUCCESS) {
qla_printk(KERN_WARNING, ha,
"Unable to update fw options (beacon on).\n");
return QLA_FUNCTION_FAILED;
}
- if (ha->pio_address)
- reg = (struct device_reg_2xxx __iomem *)ha->pio_address;
-
/* Turn off LEDs. */
spin_lock_irqsave(&ha->hardware_lock, flags);
if (ha->pio_address) {
- gpio_enable = RD_REG_WORD_PIO(®->gpioe);
- gpio_data = RD_REG_WORD_PIO(®->gpiod);
+ gpio_enable = RD_REG_WORD_PIO(PIO_REG(ha, gpioe));
+ gpio_data = RD_REG_WORD_PIO(PIO_REG(ha, gpiod));
} else {
gpio_enable = RD_REG_WORD(®->gpioe);
gpio_data = RD_REG_WORD(®->gpiod);
/* Set the modified gpio_enable values. */
if (ha->pio_address) {
- WRT_REG_WORD_PIO(®->gpioe, gpio_enable);
+ WRT_REG_WORD_PIO(PIO_REG(ha, gpioe), gpio_enable);
} else {
WRT_REG_WORD(®->gpioe, gpio_enable);
RD_REG_WORD(®->gpioe);
/* Clear out previously set LED colour. */
gpio_data &= ~GPIO_LED_MASK;
if (ha->pio_address) {
- WRT_REG_WORD_PIO(®->gpiod, gpio_data);
+ WRT_REG_WORD_PIO(PIO_REG(ha, gpiod), gpio_data);
} else {
WRT_REG_WORD(®->gpiod, gpio_data);
RD_REG_WORD(®->gpiod);
}
int
-qla2x00_beacon_off(struct scsi_qla_host *ha)
+qla2x00_beacon_off(struct scsi_qla_host *vha)
{
int rval = QLA_SUCCESS;
+ struct qla_hw_data *ha = vha->hw;
ha->beacon_blink_led = 0;
else
ha->beacon_color_state = QLA_LED_GRN_ON;
- ha->isp_ops.beacon_blink(ha); /* This turns green LED off */
+ ha->isp_ops->beacon_blink(vha); /* This turns green LED off */
ha->fw_options[1] &= ~FO1_SET_EMPHASIS_SWING;
ha->fw_options[1] &= ~FO1_DISABLE_GPIO6_7;
- rval = qla2x00_set_fw_options(ha, ha->fw_options);
+ rval = qla2x00_set_fw_options(vha, ha->fw_options);
if (rval != QLA_SUCCESS)
qla_printk(KERN_WARNING, ha,
"Unable to update fw options (beacon off).\n");
static inline void
-qla24xx_flip_colors(scsi_qla_host_t *ha, uint16_t *pflags)
+qla24xx_flip_colors(struct qla_hw_data *ha, uint16_t *pflags)
{
/* Flip all colors. */
if (ha->beacon_color_state == QLA_LED_ALL_ON) {
}
void
-qla24xx_beacon_blink(struct scsi_qla_host *ha)
+qla24xx_beacon_blink(struct scsi_qla_host *vha)
{
uint16_t led_color = 0;
uint32_t gpio_data;
unsigned long flags;
+ struct qla_hw_data *ha = vha->hw;
struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
/* Save the Original GPIOD. */
}
int
-qla24xx_beacon_on(struct scsi_qla_host *ha)
+qla24xx_beacon_on(struct scsi_qla_host *vha)
{
uint32_t gpio_data;
unsigned long flags;
+ struct qla_hw_data *ha = vha->hw;
struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
+ if (IS_QLA82XX(ha))
+ return QLA_SUCCESS;
+
if (ha->beacon_blink_led == 0) {
/* Enable firmware for update */
ha->fw_options[1] |= ADD_FO1_DISABLE_GPIO_LED_CTRL;
- if (qla2x00_set_fw_options(ha, ha->fw_options) != QLA_SUCCESS)
+ if (qla2x00_set_fw_options(vha, ha->fw_options) != QLA_SUCCESS)
return QLA_FUNCTION_FAILED;
- if (qla2x00_get_fw_options(ha, ha->fw_options) !=
+ if (qla2x00_get_fw_options(vha, ha->fw_options) !=
QLA_SUCCESS) {
qla_printk(KERN_WARNING, ha,
"Unable to update fw options (beacon on).\n");
}
int
-qla24xx_beacon_off(struct scsi_qla_host *ha)
+qla24xx_beacon_off(struct scsi_qla_host *vha)
{
uint32_t gpio_data;
unsigned long flags;
+ struct qla_hw_data *ha = vha->hw;
struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
+ if (IS_QLA82XX(ha))
+ return QLA_SUCCESS;
+
ha->beacon_blink_led = 0;
ha->beacon_color_state = QLA_LED_ALL_ON;
- ha->isp_ops.beacon_blink(ha); /* Will flip to all off. */
+ ha->isp_ops->beacon_blink(vha); /* Will flip to all off. */
/* Give control back to firmware. */
spin_lock_irqsave(&ha->hardware_lock, flags);
ha->fw_options[1] &= ~ADD_FO1_DISABLE_GPIO_LED_CTRL;
- if (qla2x00_set_fw_options(ha, ha->fw_options) != QLA_SUCCESS) {
+ if (qla2x00_set_fw_options(vha, ha->fw_options) != QLA_SUCCESS) {
qla_printk(KERN_WARNING, ha,
"Unable to update fw options (beacon off).\n");
return QLA_FUNCTION_FAILED;
}
- if (qla2x00_get_fw_options(ha, ha->fw_options) != QLA_SUCCESS) {
+ if (qla2x00_get_fw_options(vha, ha->fw_options) != QLA_SUCCESS) {
qla_printk(KERN_WARNING, ha,
"Unable to get fw options (beacon off).\n");
return QLA_FUNCTION_FAILED;
* @ha: HA context
*/
static void
-qla2x00_flash_enable(scsi_qla_host_t *ha)
+qla2x00_flash_enable(struct qla_hw_data *ha)
{
uint16_t data;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
* @ha: HA context
*/
static void
-qla2x00_flash_disable(scsi_qla_host_t *ha)
+qla2x00_flash_disable(struct qla_hw_data *ha)
{
uint16_t data;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
* Returns the byte read from flash @addr.
*/
static uint8_t
-qla2x00_read_flash_byte(scsi_qla_host_t *ha, uint32_t addr)
+qla2x00_read_flash_byte(struct qla_hw_data *ha, uint32_t addr)
{
uint16_t data;
uint16_t bank_select;
if (ha->pio_address) {
uint16_t data2;
- reg = (struct device_reg_2xxx __iomem *)ha->pio_address;
- WRT_REG_WORD_PIO(®->flash_address, (uint16_t)addr);
+ WRT_REG_WORD_PIO(PIO_REG(ha, flash_address), (uint16_t)addr);
do {
- data = RD_REG_WORD_PIO(®->flash_data);
+ data = RD_REG_WORD_PIO(PIO_REG(ha, flash_data));
barrier();
cpu_relax();
- data2 = RD_REG_WORD_PIO(®->flash_data);
+ data2 = RD_REG_WORD_PIO(PIO_REG(ha, flash_data));
} while (data != data2);
} else {
WRT_REG_WORD(®->flash_address, (uint16_t)addr);
* @data: Data to write
*/
static void
-qla2x00_write_flash_byte(scsi_qla_host_t *ha, uint32_t addr, uint8_t data)
+qla2x00_write_flash_byte(struct qla_hw_data *ha, uint32_t addr, uint8_t data)
{
uint16_t bank_select;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
/* Always perform IO mapped accesses to the FLASH registers. */
if (ha->pio_address) {
- reg = (struct device_reg_2xxx __iomem *)ha->pio_address;
- WRT_REG_WORD_PIO(®->flash_address, (uint16_t)addr);
- WRT_REG_WORD_PIO(®->flash_data, (uint16_t)data);
+ WRT_REG_WORD_PIO(PIO_REG(ha, flash_address), (uint16_t)addr);
+ WRT_REG_WORD_PIO(PIO_REG(ha, flash_data), (uint16_t)data);
} else {
WRT_REG_WORD(®->flash_address, (uint16_t)addr);
RD_REG_WORD(®->ctrl_status); /* PCI Posting. */
* Returns 0 on success, else non-zero.
*/
static int
-qla2x00_poll_flash(scsi_qla_host_t *ha, uint32_t addr, uint8_t poll_data,
+qla2x00_poll_flash(struct qla_hw_data *ha, uint32_t addr, uint8_t poll_data,
uint8_t man_id, uint8_t flash_id)
{
int status;
}
udelay(10);
barrier();
+ cond_resched();
}
return status;
}
* Returns 0 on success, else non-zero.
*/
static int
-qla2x00_program_flash_address(scsi_qla_host_t *ha, uint32_t addr, uint8_t data,
- uint8_t man_id, uint8_t flash_id)
+qla2x00_program_flash_address(struct qla_hw_data *ha, uint32_t addr,
+ uint8_t data, uint8_t man_id, uint8_t flash_id)
{
/* Write Program Command Sequence. */
if (IS_OEM_001(ha)) {
* Returns 0 on success, else non-zero.
*/
static int
-qla2x00_erase_flash(scsi_qla_host_t *ha, uint8_t man_id, uint8_t flash_id)
+qla2x00_erase_flash(struct qla_hw_data *ha, uint8_t man_id, uint8_t flash_id)
{
/* Individual Sector Erase Command Sequence */
if (IS_OEM_001(ha)) {
* Returns 0 on success, else non-zero.
*/
static int
-qla2x00_erase_flash_sector(scsi_qla_host_t *ha, uint32_t addr,
+qla2x00_erase_flash_sector(struct qla_hw_data *ha, uint32_t addr,
uint32_t sec_mask, uint8_t man_id, uint8_t flash_id)
{
/* Individual Sector Erase Command Sequence */
* @flash_id: Flash ID
*/
static void
-qla2x00_get_flash_manufacturer(scsi_qla_host_t *ha, uint8_t *man_id,
+qla2x00_get_flash_manufacturer(struct qla_hw_data *ha, uint8_t *man_id,
uint8_t *flash_id)
{
qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
qla2x00_write_flash_byte(ha, 0x5555, 0xf0);
}
+static void
+qla2x00_read_flash_data(struct qla_hw_data *ha, uint8_t *tmp_buf,
+ uint32_t saddr, uint32_t length)
+{
+ struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
+ uint32_t midpoint, ilength;
+ uint8_t data;
+
+ midpoint = length / 2;
+
+ WRT_REG_WORD(®->nvram, 0);
+ RD_REG_WORD(®->nvram);
+ for (ilength = 0; ilength < length; saddr++, ilength++, tmp_buf++) {
+ if (ilength == midpoint) {
+ WRT_REG_WORD(®->nvram, NVR_SELECT);
+ RD_REG_WORD(®->nvram);
+ }
+ data = qla2x00_read_flash_byte(ha, saddr);
+ if (saddr % 100)
+ udelay(10);
+ *tmp_buf = data;
+ cond_resched();
+ }
+}
static inline void
-qla2x00_suspend_hba(struct scsi_qla_host *ha)
+qla2x00_suspend_hba(struct scsi_qla_host *vha)
{
int cnt;
unsigned long flags;
+ struct qla_hw_data *ha = vha->hw;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
/* Suspend HBA. */
- scsi_block_requests(ha->host);
- ha->isp_ops.disable_intrs(ha);
+ scsi_block_requests(vha->host);
+ ha->isp_ops->disable_intrs(ha);
set_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
/* Pause RISC. */
}
static inline void
-qla2x00_resume_hba(struct scsi_qla_host *ha)
+qla2x00_resume_hba(struct scsi_qla_host *vha)
{
+ struct qla_hw_data *ha = vha->hw;
+
/* Resume HBA. */
clear_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
- set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
- qla2xxx_wake_dpc(ha);
- qla2x00_wait_for_hba_online(ha);
- scsi_unblock_requests(ha->host);
+ set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
+ qla2xxx_wake_dpc(vha);
+ qla2x00_wait_for_chip_reset(vha);
+ scsi_unblock_requests(vha->host);
}
uint8_t *
-qla2x00_read_optrom_data(struct scsi_qla_host *ha, uint8_t *buf,
+qla2x00_read_optrom_data(struct scsi_qla_host *vha, uint8_t *buf,
uint32_t offset, uint32_t length)
{
- unsigned long flags;
uint32_t addr, midpoint;
uint8_t *data;
+ struct qla_hw_data *ha = vha->hw;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
/* Suspend HBA. */
- qla2x00_suspend_hba(ha);
+ qla2x00_suspend_hba(vha);
/* Go with read. */
- spin_lock_irqsave(&ha->hardware_lock, flags);
midpoint = ha->optrom_size / 2;
qla2x00_flash_enable(ha);
*data = qla2x00_read_flash_byte(ha, addr);
}
qla2x00_flash_disable(ha);
- spin_unlock_irqrestore(&ha->hardware_lock, flags);
/* Resume HBA. */
- qla2x00_resume_hba(ha);
+ qla2x00_resume_hba(vha);
return buf;
}
int
-qla2x00_write_optrom_data(struct scsi_qla_host *ha, uint8_t *buf,
+qla2x00_write_optrom_data(struct scsi_qla_host *vha, uint8_t *buf,
uint32_t offset, uint32_t length)
{
int rval;
- unsigned long flags;
uint8_t man_id, flash_id, sec_number, data;
uint16_t wd;
uint32_t addr, liter, sec_mask, rest_addr;
+ struct qla_hw_data *ha = vha->hw;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
/* Suspend HBA. */
- qla2x00_suspend_hba(ha);
+ qla2x00_suspend_hba(vha);
rval = QLA_SUCCESS;
sec_number = 0;
/* Reset ISP chip. */
- spin_lock_irqsave(&ha->hardware_lock, flags);
WRT_REG_WORD(®->ctrl_status, CSR_ISP_SOFT_RESET);
pci_read_config_word(ha->pdev, PCI_COMMAND, &wd);
rval = QLA_FUNCTION_FAILED;
break;
}
+ cond_resched();
}
} while (0);
qla2x00_flash_disable(ha);
- spin_unlock_irqrestore(&ha->hardware_lock, flags);
/* Resume HBA. */
- qla2x00_resume_hba(ha);
+ qla2x00_resume_hba(vha);
return rval;
}
uint8_t *
-qla24xx_read_optrom_data(struct scsi_qla_host *ha, uint8_t *buf,
+qla24xx_read_optrom_data(struct scsi_qla_host *vha, uint8_t *buf,
uint32_t offset, uint32_t length)
{
+ struct qla_hw_data *ha = vha->hw;
+
/* Suspend HBA. */
- scsi_block_requests(ha->host);
- ha->isp_ops.disable_intrs(ha);
+ scsi_block_requests(vha->host);
set_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
/* Go with read. */
- qla24xx_read_flash_data(ha, (uint32_t *)buf, offset >> 2, length >> 2);
+ qla24xx_read_flash_data(vha, (uint32_t *)buf, offset >> 2, length >> 2);
/* Resume HBA. */
clear_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
- ha->isp_ops.enable_intrs(ha);
- scsi_unblock_requests(ha->host);
+ scsi_unblock_requests(vha->host);
return buf;
}
int
-qla24xx_write_optrom_data(struct scsi_qla_host *ha, uint8_t *buf,
+qla24xx_write_optrom_data(struct scsi_qla_host *vha, uint8_t *buf,
uint32_t offset, uint32_t length)
{
int rval;
+ struct qla_hw_data *ha = vha->hw;
/* Suspend HBA. */
- scsi_block_requests(ha->host);
- ha->isp_ops.disable_intrs(ha);
+ scsi_block_requests(vha->host);
set_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
/* Go with write. */
- rval = qla24xx_write_flash_data(ha, (uint32_t *)buf, offset >> 2,
+ rval = qla24xx_write_flash_data(vha, (uint32_t *)buf, offset >> 2,
length >> 2);
- /* Resume HBA -- RISC reset needed. */
clear_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
- set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
- qla2xxx_wake_dpc(ha);
- qla2x00_wait_for_hba_online(ha);
- scsi_unblock_requests(ha->host);
+ scsi_unblock_requests(vha->host);
return rval;
}
+
+uint8_t *
+qla25xx_read_optrom_data(struct scsi_qla_host *vha, uint8_t *buf,
+ uint32_t offset, uint32_t length)
+{
+ int rval;
+ dma_addr_t optrom_dma;
+ void *optrom;
+ uint8_t *pbuf;
+ uint32_t faddr, left, burst;
+ struct qla_hw_data *ha = vha->hw;
+
+ if (IS_QLA25XX(ha) || IS_QLA81XX(ha))
+ goto try_fast;
+ if (offset & 0xfff)
+ goto slow_read;
+ if (length < OPTROM_BURST_SIZE)
+ goto slow_read;
+
+try_fast:
+ optrom = dma_alloc_coherent(&ha->pdev->dev, OPTROM_BURST_SIZE,
+ &optrom_dma, GFP_KERNEL);
+ if (!optrom) {
+ qla_printk(KERN_DEBUG, ha,
+ "Unable to allocate memory for optrom burst read "
+ "(%x KB).\n", OPTROM_BURST_SIZE / 1024);
+
+ goto slow_read;
+ }
+
+ pbuf = buf;
+ faddr = offset >> 2;
+ left = length >> 2;
+ burst = OPTROM_BURST_DWORDS;
+ while (left != 0) {
+ if (burst > left)
+ burst = left;
+
+ rval = qla2x00_dump_ram(vha, optrom_dma,
+ flash_data_addr(ha, faddr), burst);
+ if (rval) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to burst-read optrom segment "
+ "(%x/%x/%llx).\n", rval,
+ flash_data_addr(ha, faddr),
+ (unsigned long long)optrom_dma);
+ qla_printk(KERN_WARNING, ha,
+ "Reverting to slow-read.\n");
+
+ dma_free_coherent(&ha->pdev->dev, OPTROM_BURST_SIZE,
+ optrom, optrom_dma);
+ goto slow_read;
+ }
+
+ memcpy(pbuf, optrom, burst * 4);
+
+ left -= burst;
+ faddr += burst;
+ pbuf += burst * 4;
+ }
+
+ dma_free_coherent(&ha->pdev->dev, OPTROM_BURST_SIZE, optrom,
+ optrom_dma);
+
+ return buf;
+
+slow_read:
+ return qla24xx_read_optrom_data(vha, buf, offset, length);
+}
+
+/**
+ * qla2x00_get_fcode_version() - Determine an FCODE image's version.
+ * @ha: HA context
+ * @pcids: Pointer to the FCODE PCI data structure
+ *
+ * The process of retrieving the FCODE version information is at best
+ * described as interesting.
+ *
+ * Within the first 100h bytes of the image an ASCII string is present
+ * which contains several pieces of information including the FCODE
+ * version. Unfortunately it seems the only reliable way to retrieve
+ * the version is by scanning for another sentinel within the string,
+ * the FCODE build date:
+ *
+ * ... 2.00.02 10/17/02 ...
+ *
+ * Returns QLA_SUCCESS on successful retrieval of version.
+ */
+static void
+qla2x00_get_fcode_version(struct qla_hw_data *ha, uint32_t pcids)
+{
+ int ret = QLA_FUNCTION_FAILED;
+ uint32_t istart, iend, iter, vend;
+ uint8_t do_next, rbyte, *vbyte;
+
+ memset(ha->fcode_revision, 0, sizeof(ha->fcode_revision));
+
+ /* Skip the PCI data structure. */
+ istart = pcids +
+ ((qla2x00_read_flash_byte(ha, pcids + 0x0B) << 8) |
+ qla2x00_read_flash_byte(ha, pcids + 0x0A));
+ iend = istart + 0x100;
+ do {
+ /* Scan for the sentinel date string...eeewww. */
+ do_next = 0;
+ iter = istart;
+ while ((iter < iend) && !do_next) {
+ iter++;
+ if (qla2x00_read_flash_byte(ha, iter) == '/') {
+ if (qla2x00_read_flash_byte(ha, iter + 2) ==
+ '/')
+ do_next++;
+ else if (qla2x00_read_flash_byte(ha,
+ iter + 3) == '/')
+ do_next++;
+ }
+ }
+ if (!do_next)
+ break;
+
+ /* Backtrack to previous ' ' (space). */
+ do_next = 0;
+ while ((iter > istart) && !do_next) {
+ iter--;
+ if (qla2x00_read_flash_byte(ha, iter) == ' ')
+ do_next++;
+ }
+ if (!do_next)
+ break;
+
+ /*
+ * Mark end of version tag, and find previous ' ' (space) or
+ * string length (recent FCODE images -- major hack ahead!!!).
+ */
+ vend = iter - 1;
+ do_next = 0;
+ while ((iter > istart) && !do_next) {
+ iter--;
+ rbyte = qla2x00_read_flash_byte(ha, iter);
+ if (rbyte == ' ' || rbyte == 0xd || rbyte == 0x10)
+ do_next++;
+ }
+ if (!do_next)
+ break;
+
+ /* Mark beginning of version tag, and copy data. */
+ iter++;
+ if ((vend - iter) &&
+ ((vend - iter) < sizeof(ha->fcode_revision))) {
+ vbyte = ha->fcode_revision;
+ while (iter <= vend) {
+ *vbyte++ = qla2x00_read_flash_byte(ha, iter);
+ iter++;
+ }
+ ret = QLA_SUCCESS;
+ }
+ } while (0);
+
+ if (ret != QLA_SUCCESS)
+ memset(ha->fcode_revision, 0, sizeof(ha->fcode_revision));
+}
+
+int
+qla2x00_get_flash_version(scsi_qla_host_t *vha, void *mbuf)
+{
+ int ret = QLA_SUCCESS;
+ uint8_t code_type, last_image;
+ uint32_t pcihdr, pcids;
+ uint8_t *dbyte;
+ uint16_t *dcode;
+ struct qla_hw_data *ha = vha->hw;
+
+ if (!ha->pio_address || !mbuf)
+ return QLA_FUNCTION_FAILED;
+
+ memset(ha->bios_revision, 0, sizeof(ha->bios_revision));
+ memset(ha->efi_revision, 0, sizeof(ha->efi_revision));
+ memset(ha->fcode_revision, 0, sizeof(ha->fcode_revision));
+ memset(ha->fw_revision, 0, sizeof(ha->fw_revision));
+
+ qla2x00_flash_enable(ha);
+
+ /* Begin with first PCI expansion ROM header. */
+ pcihdr = 0;
+ last_image = 1;
+ do {
+ /* Verify PCI expansion ROM header. */
+ if (qla2x00_read_flash_byte(ha, pcihdr) != 0x55 ||
+ qla2x00_read_flash_byte(ha, pcihdr + 0x01) != 0xaa) {
+ /* No signature */
+ DEBUG2(qla_printk(KERN_DEBUG, ha, "No matching ROM "
+ "signature.\n"));
+ ret = QLA_FUNCTION_FAILED;
+ break;
+ }
+
+ /* Locate PCI data structure. */
+ pcids = pcihdr +
+ ((qla2x00_read_flash_byte(ha, pcihdr + 0x19) << 8) |
+ qla2x00_read_flash_byte(ha, pcihdr + 0x18));
+
+ /* Validate signature of PCI data structure. */
+ if (qla2x00_read_flash_byte(ha, pcids) != 'P' ||
+ qla2x00_read_flash_byte(ha, pcids + 0x1) != 'C' ||
+ qla2x00_read_flash_byte(ha, pcids + 0x2) != 'I' ||
+ qla2x00_read_flash_byte(ha, pcids + 0x3) != 'R') {
+ /* Incorrect header. */
+ DEBUG2(qla_printk(KERN_INFO, ha, "PCI data struct not "
+ "found pcir_adr=%x.\n", pcids));
+ ret = QLA_FUNCTION_FAILED;
+ break;
+ }
+
+ /* Read version */
+ code_type = qla2x00_read_flash_byte(ha, pcids + 0x14);
+ switch (code_type) {
+ case ROM_CODE_TYPE_BIOS:
+ /* Intel x86, PC-AT compatible. */
+ ha->bios_revision[0] =
+ qla2x00_read_flash_byte(ha, pcids + 0x12);
+ ha->bios_revision[1] =
+ qla2x00_read_flash_byte(ha, pcids + 0x13);
+ DEBUG3(qla_printk(KERN_DEBUG, ha, "read BIOS %d.%d.\n",
+ ha->bios_revision[1], ha->bios_revision[0]));
+ break;
+ case ROM_CODE_TYPE_FCODE:
+ /* Open Firmware standard for PCI (FCode). */
+ /* Eeeewww... */
+ qla2x00_get_fcode_version(ha, pcids);
+ break;
+ case ROM_CODE_TYPE_EFI:
+ /* Extensible Firmware Interface (EFI). */
+ ha->efi_revision[0] =
+ qla2x00_read_flash_byte(ha, pcids + 0x12);
+ ha->efi_revision[1] =
+ qla2x00_read_flash_byte(ha, pcids + 0x13);
+ DEBUG3(qla_printk(KERN_DEBUG, ha, "read EFI %d.%d.\n",
+ ha->efi_revision[1], ha->efi_revision[0]));
+ break;
+ default:
+ DEBUG2(qla_printk(KERN_INFO, ha, "Unrecognized code "
+ "type %x at pcids %x.\n", code_type, pcids));
+ break;
+ }
+
+ last_image = qla2x00_read_flash_byte(ha, pcids + 0x15) & BIT_7;
+
+ /* Locate next PCI expansion ROM. */
+ pcihdr += ((qla2x00_read_flash_byte(ha, pcids + 0x11) << 8) |
+ qla2x00_read_flash_byte(ha, pcids + 0x10)) * 512;
+ } while (!last_image);
+
+ if (IS_QLA2322(ha)) {
+ /* Read firmware image information. */
+ memset(ha->fw_revision, 0, sizeof(ha->fw_revision));
+ dbyte = mbuf;
+ memset(dbyte, 0, 8);
+ dcode = (uint16_t *)dbyte;
+
+ qla2x00_read_flash_data(ha, dbyte, ha->flt_region_fw * 4 + 10,
+ 8);
+ DEBUG3(qla_printk(KERN_DEBUG, ha, "dumping fw ver from "
+ "flash:\n"));
+ DEBUG3(qla2x00_dump_buffer((uint8_t *)dbyte, 8));
+
+ if ((dcode[0] == 0xffff && dcode[1] == 0xffff &&
+ dcode[2] == 0xffff && dcode[3] == 0xffff) ||
+ (dcode[0] == 0 && dcode[1] == 0 && dcode[2] == 0 &&
+ dcode[3] == 0)) {
+ DEBUG2(qla_printk(KERN_INFO, ha, "Unrecognized fw "
+ "revision at %x.\n", ha->flt_region_fw * 4));
+ } else {
+ /* values are in big endian */
+ ha->fw_revision[0] = dbyte[0] << 16 | dbyte[1];
+ ha->fw_revision[1] = dbyte[2] << 16 | dbyte[3];
+ ha->fw_revision[2] = dbyte[4] << 16 | dbyte[5];
+ }
+ }
+
+ qla2x00_flash_disable(ha);
+
+ return ret;
+}
+
+int
+qla24xx_get_flash_version(scsi_qla_host_t *vha, void *mbuf)
+{
+ int ret = QLA_SUCCESS;
+ uint32_t pcihdr, pcids;
+ uint32_t *dcode;
+ uint8_t *bcode;
+ uint8_t code_type, last_image;
+ int i;
+ struct qla_hw_data *ha = vha->hw;
+
+ if (IS_QLA82XX(ha))
+ return ret;
+
+ if (!mbuf)
+ return QLA_FUNCTION_FAILED;
+
+ memset(ha->bios_revision, 0, sizeof(ha->bios_revision));
+ memset(ha->efi_revision, 0, sizeof(ha->efi_revision));
+ memset(ha->fcode_revision, 0, sizeof(ha->fcode_revision));
+ memset(ha->fw_revision, 0, sizeof(ha->fw_revision));
+
+ dcode = mbuf;
+
+ /* Begin with first PCI expansion ROM header. */
+ pcihdr = ha->flt_region_boot << 2;
+ last_image = 1;
+ do {
+ /* Verify PCI expansion ROM header. */
+ qla24xx_read_flash_data(vha, dcode, pcihdr >> 2, 0x20);
+ bcode = mbuf + (pcihdr % 4);
+ if (bcode[0x0] != 0x55 || bcode[0x1] != 0xaa) {
+ /* No signature */
+ DEBUG2(qla_printk(KERN_DEBUG, ha, "No matching ROM "
+ "signature.\n"));
+ ret = QLA_FUNCTION_FAILED;
+ break;
+ }
+
+ /* Locate PCI data structure. */
+ pcids = pcihdr + ((bcode[0x19] << 8) | bcode[0x18]);
+
+ qla24xx_read_flash_data(vha, dcode, pcids >> 2, 0x20);
+ bcode = mbuf + (pcihdr % 4);
+
+ /* Validate signature of PCI data structure. */
+ if (bcode[0x0] != 'P' || bcode[0x1] != 'C' ||
+ bcode[0x2] != 'I' || bcode[0x3] != 'R') {
+ /* Incorrect header. */
+ DEBUG2(qla_printk(KERN_INFO, ha, "PCI data struct not "
+ "found pcir_adr=%x.\n", pcids));
+ ret = QLA_FUNCTION_FAILED;
+ break;
+ }
+
+ /* Read version */
+ code_type = bcode[0x14];
+ switch (code_type) {
+ case ROM_CODE_TYPE_BIOS:
+ /* Intel x86, PC-AT compatible. */
+ ha->bios_revision[0] = bcode[0x12];
+ ha->bios_revision[1] = bcode[0x13];
+ DEBUG3(qla_printk(KERN_DEBUG, ha, "read BIOS %d.%d.\n",
+ ha->bios_revision[1], ha->bios_revision[0]));
+ break;
+ case ROM_CODE_TYPE_FCODE:
+ /* Open Firmware standard for PCI (FCode). */
+ ha->fcode_revision[0] = bcode[0x12];
+ ha->fcode_revision[1] = bcode[0x13];
+ DEBUG3(qla_printk(KERN_DEBUG, ha, "read FCODE %d.%d.\n",
+ ha->fcode_revision[1], ha->fcode_revision[0]));
+ break;
+ case ROM_CODE_TYPE_EFI:
+ /* Extensible Firmware Interface (EFI). */
+ ha->efi_revision[0] = bcode[0x12];
+ ha->efi_revision[1] = bcode[0x13];
+ DEBUG3(qla_printk(KERN_DEBUG, ha, "read EFI %d.%d.\n",
+ ha->efi_revision[1], ha->efi_revision[0]));
+ break;
+ default:
+ DEBUG2(qla_printk(KERN_INFO, ha, "Unrecognized code "
+ "type %x at pcids %x.\n", code_type, pcids));
+ break;
+ }
+
+ last_image = bcode[0x15] & BIT_7;
+
+ /* Locate next PCI expansion ROM. */
+ pcihdr += ((bcode[0x11] << 8) | bcode[0x10]) * 512;
+ } while (!last_image);
+
+ /* Read firmware image information. */
+ memset(ha->fw_revision, 0, sizeof(ha->fw_revision));
+ dcode = mbuf;
+
+ qla24xx_read_flash_data(vha, dcode, ha->flt_region_fw + 4, 4);
+ for (i = 0; i < 4; i++)
+ dcode[i] = be32_to_cpu(dcode[i]);
+
+ if ((dcode[0] == 0xffffffff && dcode[1] == 0xffffffff &&
+ dcode[2] == 0xffffffff && dcode[3] == 0xffffffff) ||
+ (dcode[0] == 0 && dcode[1] == 0 && dcode[2] == 0 &&
+ dcode[3] == 0)) {
+ DEBUG2(qla_printk(KERN_INFO, ha, "Unrecognized fw "
+ "revision at %x.\n", ha->flt_region_fw * 4));
+ } else {
+ ha->fw_revision[0] = dcode[0];
+ ha->fw_revision[1] = dcode[1];
+ ha->fw_revision[2] = dcode[2];
+ ha->fw_revision[3] = dcode[3];
+ }
+
+ return ret;
+}
+
+static int
+qla2xxx_is_vpd_valid(uint8_t *pos, uint8_t *end)
+{
+ if (pos >= end || *pos != 0x82)
+ return 0;
+
+ pos += 3 + pos[1];
+ if (pos >= end || *pos != 0x90)
+ return 0;
+
+ pos += 3 + pos[1];
+ if (pos >= end || *pos != 0x78)
+ return 0;
+
+ return 1;
+}
+
+int
+qla2xxx_get_vpd_field(scsi_qla_host_t *vha, char *key, char *str, size_t size)
+{
+ struct qla_hw_data *ha = vha->hw;
+ uint8_t *pos = ha->vpd;
+ uint8_t *end = pos + ha->vpd_size;
+ int len = 0;
+
+ if (!IS_FWI2_CAPABLE(ha) || !qla2xxx_is_vpd_valid(pos, end))
+ return 0;
+
+ while (pos < end && *pos != 0x78) {
+ len = (*pos == 0x82) ? pos[1] : pos[2];
+
+ if (!strncmp(pos, key, strlen(key)))
+ break;
+
+ if (*pos != 0x90 && *pos != 0x91)
+ pos += len;
+
+ pos += 3;
+ }
+
+ if (pos < end - len && *pos != 0x78)
+ return snprintf(str, size, "%.*s", len, pos + 3);
+
+ return 0;
+}
+
+int
+qla24xx_read_fcp_prio_cfg(scsi_qla_host_t *vha)
+{
+ int len, max_len;
+ uint32_t fcp_prio_addr;
+ struct qla_hw_data *ha = vha->hw;
+
+ if (!ha->fcp_prio_cfg) {
+ ha->fcp_prio_cfg = vmalloc(FCP_PRIO_CFG_SIZE);
+ if (!ha->fcp_prio_cfg) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to allocate memory for fcp priority data "
+ "(%x).\n", FCP_PRIO_CFG_SIZE);
+ return QLA_FUNCTION_FAILED;
+ }
+ }
+ memset(ha->fcp_prio_cfg, 0, FCP_PRIO_CFG_SIZE);
+
+ fcp_prio_addr = ha->flt_region_fcp_prio;
+
+ /* first read the fcp priority data header from flash */
+ ha->isp_ops->read_optrom(vha, (uint8_t *)ha->fcp_prio_cfg,
+ fcp_prio_addr << 2, FCP_PRIO_CFG_HDR_SIZE);
+
+ if (!qla24xx_fcp_prio_cfg_valid(ha->fcp_prio_cfg, 0))
+ goto fail;
+
+ /* read remaining FCP CMD config data from flash */
+ fcp_prio_addr += (FCP_PRIO_CFG_HDR_SIZE >> 2);
+ len = ha->fcp_prio_cfg->num_entries * FCP_PRIO_CFG_ENTRY_SIZE;
+ max_len = FCP_PRIO_CFG_SIZE - FCP_PRIO_CFG_HDR_SIZE;
+
+ ha->isp_ops->read_optrom(vha, (uint8_t *)&ha->fcp_prio_cfg->entry[0],
+ fcp_prio_addr << 2, (len < max_len ? len : max_len));
+
+ /* revalidate the entire FCP priority config data, including entries */
+ if (!qla24xx_fcp_prio_cfg_valid(ha->fcp_prio_cfg, 1))
+ goto fail;
+
+ ha->flags.fcp_prio_enabled = 1;
+ return QLA_SUCCESS;
+fail:
+ vfree(ha->fcp_prio_cfg);
+ ha->fcp_prio_cfg = NULL;
+ return QLA_FUNCTION_FAILED;
+}
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff