#include <linux/workqueue.h>
#include <linux/firmware.h>
#include <linux/aer.h>
-#include <asm/semaphore.h>
+#include <linux/mutex.h>
#include <scsi/scsi.h>
#include <scsi/scsi_host.h>
#define LSD(x) ((uint32_t)((uint64_t)(x)))
#define MSD(x) ((uint32_t)((((uint64_t)(x)) >> 16) >> 16))
+#define MAKE_HANDLE(x, y) ((uint32_t)((((uint32_t)(x)) << 16) | (uint32_t)(y)))
/*
* I/O register
/* ISP request and response entry counts (37-65535) */
#define REQUEST_ENTRY_CNT_2100 128 /* Number of request entries. */
#define REQUEST_ENTRY_CNT_2200 2048 /* Number of request entries. */
-#define REQUEST_ENTRY_CNT_2XXX_EXT_MEM 4096 /* Number of request entries. */
-#define REQUEST_ENTRY_CNT_24XX 4096 /* Number of request entries. */
+#define REQUEST_ENTRY_CNT_24XX 2048 /* Number of request entries. */
#define RESPONSE_ENTRY_CNT_2100 64 /* Number of response entries.*/
#define RESPONSE_ENTRY_CNT_2300 512 /* Number of response entries.*/
+#define RESPONSE_ENTRY_CNT_MQ 128 /* Number of response entries.*/
+
+struct req_que;
/*
* SCSI Request Block
*/
typedef struct srb {
- struct scsi_qla_host *ha; /* HA the SP is queued on */
struct fc_port *fcport;
struct scsi_cmnd *cmd; /* Linux SCSI command pkt */
uint16_t flags;
- /* Single transfer DMA context */
- dma_addr_t dma_handle;
-
uint32_t request_sense_length;
uint8_t *request_sense_ptr;
} srb_t;
/*
* SRB flag definitions
*/
-#define SRB_TIMEOUT BIT_0 /* Command timed out */
-#define SRB_DMA_VALID BIT_1 /* Command sent to ISP */
-#define SRB_WATCHDOG BIT_2 /* Command on watchdog list */
-#define SRB_ABORT_PENDING BIT_3 /* Command abort sent to device */
-
-#define SRB_ABORTED BIT_4 /* Command aborted command already */
-#define SRB_RETRY BIT_5 /* Command needs retrying */
-#define SRB_GOT_SENSE BIT_6 /* Command has sense data */
-#define SRB_FAILOVER BIT_7 /* Command in failover state */
-
-#define SRB_BUSY BIT_8 /* Command is in busy retry state */
-#define SRB_FO_CANCEL BIT_9 /* Command don't need to do failover */
-#define SRB_IOCTL BIT_10 /* IOCTL command. */
-#define SRB_TAPE BIT_11 /* FCP2 (Tape) command. */
+#define SRB_DMA_VALID BIT_0 /* Command sent to ISP */
/*
* ISP I/O Register Set structure definitions.
} u_end;
};
+struct device_reg_25xxmq {
+ uint32_t req_q_in;
+ uint32_t req_q_out;
+ uint32_t rsp_q_in;
+ uint32_t rsp_q_out;
+};
+
typedef union {
struct device_reg_2xxx isp;
struct device_reg_24xx isp24;
+ struct device_reg_25xxmq isp25mq;
} device_reg_t;
#define ISP_REQ_Q_IN(ha, reg) \
#define MBC_GET_TIMEOUT_PARAMS 0x22 /* Get FW timeouts. */
#define MBC_TRACE_CONTROL 0x27 /* Trace control command. */
#define MBC_GEN_SYSTEM_ERROR 0x2a /* Generate System Error. */
+#define MBC_WRITE_SFP 0x30 /* Write SFP Data. */
#define MBC_READ_SFP 0x31 /* Read SFP Data. */
#define MBC_SET_TIMEOUT_PARAMS 0x32 /* Set FW timeouts. */
#define MBC_MID_INITIALIZE_FIRMWARE 0x48 /* MID Initialize firmware. */
uint32_t prim_seq_err_cnt;
uint32_t inval_xmit_word_cnt;
uint32_t inval_crc_cnt;
- uint32_t unused1[0x1b];
+ uint32_t lip_cnt;
+ uint32_t unused1[0x1a];
uint32_t tx_frames;
uint32_t rx_frames;
uint32_t dumped_frames;
*/
typedef struct fc_port {
struct list_head list;
- struct scsi_qla_host *ha;
+ struct scsi_qla_host *vha;
uint8_t node_name[WWN_SIZE];
uint8_t port_name[WWN_SIZE];
int login_retry;
atomic_t port_down_timer;
- spinlock_t rport_lock;
struct fc_rport *rport, *drport;
u32 supported_classes;
unsigned long last_queue_full;
unsigned long last_ramp_up;
- struct list_head vp_fcport;
uint16_t vp_idx;
} fc_port_t;
#define FCS_DEVICE_DEAD 2
#define FCS_DEVICE_LOST 3
#define FCS_ONLINE 4
-#define FCS_NOT_SUPPORTED 5
-#define FCS_FAILOVER 6
-#define FCS_FAILOVER_FAILED 7
/*
* FC port flags.
*/
#define FCF_FABRIC_DEVICE BIT_0
#define FCF_LOGIN_NEEDED BIT_1
-#define FCF_FO_MASKED BIT_2
-#define FCF_FAILOVER_NEEDED BIT_3
-#define FCF_RESET_NEEDED BIT_4
-#define FCF_PERSISTENT_BOUND BIT_5
-#define FCF_TAPE_PRESENT BIT_6
-#define FCF_FARP_DONE BIT_7
-#define FCF_FARP_FAILED BIT_8
-#define FCF_FARP_REPLY_NEEDED BIT_9
-#define FCF_AUTH_REQ BIT_10
-#define FCF_SEND_AUTH_REQ BIT_11
-#define FCF_RECEIVE_AUTH_REQ BIT_12
-#define FCF_AUTH_SUCCESS BIT_13
-#define FCF_RLC_SUPPORT BIT_14
-#define FCF_CONFIG BIT_15 /* Needed? */
-#define FCF_RESCAN_NEEDED BIT_16
-#define FCF_XP_DEVICE BIT_17
-#define FCF_MSA_DEVICE BIT_18
-#define FCF_EVA_DEVICE BIT_19
-#define FCF_MSA_PORT_ACTIVE BIT_20
-#define FCF_FAILBACK_DISABLE BIT_21
-#define FCF_FAILOVER_DISABLE BIT_22
-#define FCF_DSXXX_DEVICE BIT_23
-#define FCF_AA_EVA_DEVICE BIT_24
-#define FCF_AA_MSA_DEVICE BIT_25
+#define FCF_TAPE_PRESENT BIT_2
/* No loop ID flag. */
#define FC_NO_LOOP_ID 0x1000
#define CT_ACCEPT_RESPONSE 0x8002
#define CT_REASON_INVALID_COMMAND_CODE 0x01
#define CT_REASON_CANNOT_PERFORM 0x09
+#define CT_REASON_COMMAND_UNSUPPORTED 0x0b
#define CT_EXPL_ALREADY_REGISTERED 0x10
#define NS_N_PORT_TYPE 0x01
#define VP_RET_CODE_NO_MEM 5
#define VP_RET_CODE_NOT_FOUND 6
+struct qla_hw_data;
+struct rsp_que;
/*
* ISP operations
*/
char * (*fw_version_str) (struct scsi_qla_host *, char *);
irq_handler_t intr_handler;
- void (*enable_intrs) (struct scsi_qla_host *);
- void (*disable_intrs) (struct scsi_qla_host *);
+ void (*enable_intrs) (struct qla_hw_data *);
+ void (*disable_intrs) (struct qla_hw_data *);
- int (*abort_command) (struct scsi_qla_host *, srb_t *);
- int (*abort_target) (struct fc_port *);
+ int (*abort_command) (srb_t *);
+ int (*target_reset) (struct fc_port *, unsigned int, int);
+ int (*lun_reset) (struct fc_port *, unsigned int, int);
int (*fabric_login) (struct scsi_qla_host *, uint16_t, uint8_t,
uint8_t, uint8_t, uint16_t *, uint8_t);
int (*fabric_logout) (struct scsi_qla_host *, uint16_t, uint8_t,
uint32_t);
int (*get_flash_version) (struct scsi_qla_host *, void *);
+ int (*start_scsi) (srb_t *);
};
/* MSI-X Support *************************************************************/
#define QLA_MSIX_DEFAULT 0x00
#define QLA_MSIX_RSP_Q 0x01
-#define QLA_MSIX_ENTRIES 2
#define QLA_MIDX_DEFAULT 0
#define QLA_MIDX_RSP_Q 1
+#define QLA_PCI_MSIX_CONTROL 0xa2
struct scsi_qla_host;
struct qla_msix_entry {
int have_irq;
- uint16_t msix_vector;
- uint16_t msix_entry;
+ uint32_t vector;
+ uint16_t entry;
+ struct rsp_que *rsp;
};
#define WATCH_INTERVAL 1 /* number of seconds */
/* Work events. */
enum qla_work_type {
QLA_EVT_AEN,
- QLA_EVT_HWE_LOG,
+ QLA_EVT_IDC_ACK,
};
u32 data;
} aen;
struct {
- uint16_t code;
- uint16_t d1, d2, d3;
- } hwe;
+#define QLA_IDC_ACK_REGS 7
+ uint16_t mb[QLA_IDC_ACK_REGS];
+ } idc_ack;
} u;
};
-/*
- * Linux Host Adapter structure
- */
-typedef struct scsi_qla_host {
+struct qla_chip_state_84xx {
struct list_head list;
+ struct kref kref;
+
+ void *bus;
+ spinlock_t access_lock;
+ struct mutex fw_update_mutex;
+ uint32_t fw_update;
+ uint32_t op_fw_version;
+ uint32_t op_fw_size;
+ uint32_t op_fw_seq_size;
+ uint32_t diag_fw_version;
+ uint32_t gold_fw_version;
+};
- /* Commonly used flags and state information. */
- struct Scsi_Host *host;
- struct pci_dev *pdev;
+struct qla_statistics {
+ uint32_t total_isp_aborts;
+ uint64_t input_bytes;
+ uint64_t output_bytes;
+};
- unsigned long host_no;
- unsigned long instance;
+/* Multi queue support */
+#define MBC_INITIALIZE_MULTIQ 0x1f
+#define QLA_QUE_PAGE 0X1000
+#define QLA_MQ_SIZE 32
+#define QLA_MAX_QUEUES 256
+#define ISP_QUE_REG(ha, id) \
+ ((ha->mqenable) ? \
+ ((void *)(ha->mqiobase) +\
+ (QLA_QUE_PAGE * id)) :\
+ ((void *)(ha->iobase)))
+#define QLA_REQ_QUE_ID(tag) \
+ ((tag < QLA_MAX_QUEUES && tag > 0) ? tag : 0)
+#define QLA_DEFAULT_QUE_QOS 5
+#define QLA_PRECONFIG_VPORTS 32
+#define QLA_MAX_VPORTS_QLA24XX 128
+#define QLA_MAX_VPORTS_QLA25XX 256
+/* Response queue data structure */
+struct rsp_que {
+ dma_addr_t dma;
+ response_t *ring;
+ response_t *ring_ptr;
+ uint32_t __iomem *rsp_q_in; /* FWI2-capable only. */
+ uint32_t __iomem *rsp_q_out;
+ uint16_t ring_index;
+ uint16_t out_ptr;
+ uint16_t length;
+ uint16_t options;
+ uint16_t rid;
+ uint16_t id;
+ uint16_t vp_idx;
+ struct qla_hw_data *hw;
+ struct qla_msix_entry *msix;
+ struct req_que *req;
+ srb_t *status_srb; /* status continuation entry */
+ struct work_struct q_work;
+};
+
+/* Request queue data structure */
+struct req_que {
+ dma_addr_t dma;
+ request_t *ring;
+ request_t *ring_ptr;
+ uint32_t __iomem *req_q_in; /* FWI2-capable only. */
+ uint32_t __iomem *req_q_out;
+ uint16_t ring_index;
+ uint16_t in_ptr;
+ uint16_t cnt;
+ uint16_t length;
+ uint16_t options;
+ uint16_t rid;
+ uint16_t id;
+ uint16_t qos;
+ uint16_t vp_idx;
+ struct rsp_que *rsp;
+ srb_t *outstanding_cmds[MAX_OUTSTANDING_COMMANDS];
+ uint32_t current_outstanding_cmd;
+ int max_q_depth;
+};
+
+/*
+ * Qlogic host adapter specific data structure.
+*/
+struct qla_hw_data {
+ struct pci_dev *pdev;
+ /* SRB cache. */
+#define SRB_MIN_REQ 128
+ mempool_t *srb_mempool;
volatile struct {
- uint32_t init_done :1;
- uint32_t online :1;
uint32_t mbox_int :1;
uint32_t mbox_busy :1;
- uint32_t rscn_queue_overflow :1;
- uint32_t reset_active :1;
-
- uint32_t management_server_logged_in :1;
- uint32_t process_response_queue :1;
uint32_t disable_risc_code_load :1;
uint32_t enable_64bit_addressing :1;
uint32_t enable_lip_reset :1;
- uint32_t enable_lip_full_login :1;
uint32_t enable_target_reset :1;
+ uint32_t enable_lip_full_login :1;
uint32_t enable_led_scheme :1;
uint32_t inta_enabled :1;
uint32_t msi_enabled :1;
uint32_t msix_enabled :1;
uint32_t disable_serdes :1;
uint32_t gpsc_supported :1;
- uint32_t vsan_enabled :1;
uint32_t npiv_supported :1;
uint32_t fce_enabled :1;
- uint32_t hw_event_marker_found :1;
+ uint32_t fac_supported :1;
+ uint32_t chip_reset_done :1;
+ uint32_t port0 :1;
+ uint32_t running_gold_fw :1;
} flags;
- atomic_t loop_state;
-#define LOOP_TIMEOUT 1
-#define LOOP_DOWN 2
-#define LOOP_UP 3
-#define LOOP_UPDATE 4
-#define LOOP_READY 5
-#define LOOP_DEAD 6
-
- unsigned long dpc_flags;
-#define RESET_MARKER_NEEDED 0 /* Send marker to ISP. */
-#define RESET_ACTIVE 1
-#define ISP_ABORT_NEEDED 2 /* Initiate ISP abort. */
-#define ABORT_ISP_ACTIVE 3 /* ISP abort in progress. */
-#define LOOP_RESYNC_NEEDED 4 /* Device Resync needed. */
-#define LOOP_RESYNC_ACTIVE 5
-#define LOCAL_LOOP_UPDATE 6 /* Perform a local loop update. */
-#define RSCN_UPDATE 7 /* Perform an RSCN update. */
-#define MAILBOX_RETRY 8
-#define ISP_RESET_NEEDED 9 /* Initiate a ISP reset. */
-#define FAILOVER_EVENT_NEEDED 10
-#define FAILOVER_EVENT 11
-#define FAILOVER_NEEDED 12
-#define SCSI_RESTART_NEEDED 13 /* Processes SCSI retry queue. */
-#define PORT_RESTART_NEEDED 14 /* Processes Retry queue. */
-#define RESTART_QUEUES_NEEDED 15 /* Restarts the Lun queue. */
-#define ABORT_QUEUES_NEEDED 16
-#define RELOGIN_NEEDED 17
-#define LOGIN_RETRY_NEEDED 18 /* Initiate required fabric logins. */
-#define REGISTER_FC4_NEEDED 19 /* SNS FC4 registration required. */
-#define ISP_ABORT_RETRY 20 /* ISP aborted. */
-#define FCPORT_RESCAN_NEEDED 21 /* IO descriptor processing needed */
-#define IODESC_PROCESS_NEEDED 22 /* IO descriptor processing needed */
-#define IOCTL_ERROR_RECOVERY 23
-#define LOOP_RESET_NEEDED 24
-#define BEACON_BLINK_NEEDED 25
-#define REGISTER_FDMI_NEEDED 26
-#define FCPORT_UPDATE_NEEDED 27
-#define VP_DPC_NEEDED 28 /* wake up for VP dpc handling */
-
- uint32_t device_flags;
-#define DFLG_LOCAL_DEVICES BIT_0
-#define DFLG_RETRY_LOCAL_DEVICES BIT_1
-#define DFLG_FABRIC_DEVICES BIT_2
-#define SWITCH_FOUND BIT_3
-#define DFLG_NO_CABLE BIT_4
-
-#define PCI_DEVICE_ID_QLOGIC_ISP2532 0x2532
- uint32_t device_type;
-#define DT_ISP2100 BIT_0
-#define DT_ISP2200 BIT_1
-#define DT_ISP2300 BIT_2
-#define DT_ISP2312 BIT_3
-#define DT_ISP2322 BIT_4
-#define DT_ISP6312 BIT_5
-#define DT_ISP6322 BIT_6
-#define DT_ISP2422 BIT_7
-#define DT_ISP2432 BIT_8
-#define DT_ISP5422 BIT_9
-#define DT_ISP5432 BIT_10
-#define DT_ISP2532 BIT_11
-#define DT_ISP_LAST (DT_ISP2532 << 1)
-
-#define DT_IIDMA BIT_26
-#define DT_FWI2 BIT_27
-#define DT_ZIO_SUPPORTED BIT_28
-#define DT_OEM_001 BIT_29
-#define DT_ISP2200A BIT_30
-#define DT_EXTENDED_IDS BIT_31
-
-#define DT_MASK(ha) ((ha)->device_type & (DT_ISP_LAST - 1))
-#define IS_QLA2100(ha) (DT_MASK(ha) & DT_ISP2100)
-#define IS_QLA2200(ha) (DT_MASK(ha) & DT_ISP2200)
-#define IS_QLA2300(ha) (DT_MASK(ha) & DT_ISP2300)
-#define IS_QLA2312(ha) (DT_MASK(ha) & DT_ISP2312)
-#define IS_QLA2322(ha) (DT_MASK(ha) & DT_ISP2322)
-#define IS_QLA6312(ha) (DT_MASK(ha) & DT_ISP6312)
-#define IS_QLA6322(ha) (DT_MASK(ha) & DT_ISP6322)
-#define IS_QLA2422(ha) (DT_MASK(ha) & DT_ISP2422)
-#define IS_QLA2432(ha) (DT_MASK(ha) & DT_ISP2432)
-#define IS_QLA5422(ha) (DT_MASK(ha) & DT_ISP5422)
-#define IS_QLA5432(ha) (DT_MASK(ha) & DT_ISP5432)
-#define IS_QLA2532(ha) (DT_MASK(ha) & DT_ISP2532)
-
-#define IS_QLA23XX(ha) (IS_QLA2300(ha) || IS_QLA2312(ha) || IS_QLA2322(ha) || \
- IS_QLA6312(ha) || IS_QLA6322(ha))
-#define IS_QLA24XX(ha) (IS_QLA2422(ha) || IS_QLA2432(ha))
-#define IS_QLA54XX(ha) (IS_QLA5422(ha) || IS_QLA5432(ha))
-#define IS_QLA25XX(ha) (IS_QLA2532(ha))
-
-#define IS_IIDMA_CAPABLE(ha) ((ha)->device_type & DT_IIDMA)
-#define IS_FWI2_CAPABLE(ha) ((ha)->device_type & DT_FWI2)
-#define IS_ZIO_SUPPORTED(ha) ((ha)->device_type & DT_ZIO_SUPPORTED)
-#define IS_OEM_001(ha) ((ha)->device_type & DT_OEM_001)
-#define HAS_EXTENDED_IDS(ha) ((ha)->device_type & DT_EXTENDED_IDS)
-
- /* SRB cache. */
-#define SRB_MIN_REQ 128
- mempool_t *srb_mempool;
-
/* This spinlock is used to protect "io transactions", you must
- * acquire it before doing any IO to the card, eg with RD_REG*() and
- * WRT_REG*() for the duration of your entire commandtransaction.
- *
- * This spinlock is of lower priority than the io request lock.
- */
-
- spinlock_t hardware_lock ____cacheline_aligned;
+ * acquire it before doing any IO to the card, eg with RD_REG*() and
+ * WRT_REG*() for the duration of your entire commandtransaction.
+ *
+ * This spinlock is of lower priority than the io request lock.
+ */
+ spinlock_t hardware_lock ____cacheline_aligned;
int bars;
int mem_only;
- device_reg_t __iomem *iobase; /* Base I/O address */
+ device_reg_t __iomem *iobase; /* Base I/O address */
resource_size_t pio_address;
-#define MIN_IOBASE_LEN 0x100
-
- /* ISP ring lock, rings, and indexes */
- dma_addr_t request_dma; /* Physical address. */
- request_t *request_ring; /* Base virtual address */
- request_t *request_ring_ptr; /* Current address. */
- uint16_t req_ring_index; /* Current index. */
- uint16_t req_q_cnt; /* Number of available entries. */
- uint16_t request_q_length;
-
- dma_addr_t response_dma; /* Physical address. */
- response_t *response_ring; /* Base virtual address */
- response_t *response_ring_ptr; /* Current address. */
- uint16_t rsp_ring_index; /* Current index. */
- uint16_t response_q_length;
- struct isp_operations *isp_ops;
+#define MIN_IOBASE_LEN 0x100
+/* Multi queue data structs */
+ device_reg_t __iomem *mqiobase;
+ uint16_t msix_count;
+ uint8_t mqenable;
+ struct req_que **req_q_map;
+ struct rsp_que **rsp_q_map;
+ unsigned long req_qid_map[(QLA_MAX_QUEUES / 8) / sizeof(unsigned long)];
+ unsigned long rsp_qid_map[(QLA_MAX_QUEUES / 8) / sizeof(unsigned long)];
+ uint8_t max_req_queues;
+ uint8_t max_rsp_queues;
+ struct qla_npiv_entry *npiv_info;
+ uint16_t nvram_npiv_size;
+
+ uint16_t switch_cap;
+#define FLOGI_SEQ_DEL BIT_8
+#define FLOGI_MID_SUPPORT BIT_10
+#define FLOGI_VSAN_SUPPORT BIT_12
+#define FLOGI_SP_SUPPORT BIT_13
+
+ uint8_t port_no; /* Physical port of adapter */
- /* Outstandings ISP commands. */
- srb_t *outstanding_cmds[MAX_OUTSTANDING_COMMANDS];
- uint32_t current_outstanding_cmd;
- srb_t *status_srb; /* Status continuation entry. */
+ /* Timeout timers. */
+ uint8_t loop_down_abort_time; /* port down timer */
+ atomic_t loop_down_timer; /* loop down timer */
+ uint8_t link_down_timeout; /* link down timeout */
+ uint16_t max_loop_id;
- /* ISP configuration data. */
- uint16_t loop_id; /* Host adapter loop id */
- uint16_t switch_cap;
-#define FLOGI_SEQ_DEL BIT_8
-#define FLOGI_MID_SUPPORT BIT_10
-#define FLOGI_VSAN_SUPPORT BIT_12
-#define FLOGI_SP_SUPPORT BIT_13
uint16_t fb_rev;
-
- port_id_t d_id; /* Host adapter port id */
- uint16_t max_public_loop_ids;
- uint16_t min_external_loopid; /* First external loop Id */
+ uint16_t min_external_loopid; /* First external loop Id */
#define PORT_SPEED_UNKNOWN 0xFFFF
-#define PORT_SPEED_1GB 0x00
-#define PORT_SPEED_2GB 0x01
-#define PORT_SPEED_4GB 0x03
-#define PORT_SPEED_8GB 0x04
- uint16_t link_data_rate; /* F/W operating speed */
+#define PORT_SPEED_1GB 0x00
+#define PORT_SPEED_2GB 0x01
+#define PORT_SPEED_4GB 0x03
+#define PORT_SPEED_8GB 0x04
+#define PORT_SPEED_10GB 0x13
+ uint16_t link_data_rate; /* F/W operating speed */
uint8_t current_topology;
uint8_t prev_topology;
#define ISP_CFG_FL 4
#define ISP_CFG_F 8
- uint8_t operating_mode; /* F/W operating mode */
+ uint8_t operating_mode; /* F/W operating mode */
#define LOOP 0
#define P2P 1
#define LOOP_P2P 2
#define P2P_LOOP 3
-
- uint8_t marker_needed;
-
uint8_t interrupts_on;
+ uint32_t isp_abort_cnt;
+
+#define PCI_DEVICE_ID_QLOGIC_ISP2532 0x2532
+#define PCI_DEVICE_ID_QLOGIC_ISP8432 0x8432
+#define PCI_DEVICE_ID_QLOGIC_ISP8001 0x8001
+ uint32_t device_type;
+#define DT_ISP2100 BIT_0
+#define DT_ISP2200 BIT_1
+#define DT_ISP2300 BIT_2
+#define DT_ISP2312 BIT_3
+#define DT_ISP2322 BIT_4
+#define DT_ISP6312 BIT_5
+#define DT_ISP6322 BIT_6
+#define DT_ISP2422 BIT_7
+#define DT_ISP2432 BIT_8
+#define DT_ISP5422 BIT_9
+#define DT_ISP5432 BIT_10
+#define DT_ISP2532 BIT_11
+#define DT_ISP8432 BIT_12
+#define DT_ISP8001 BIT_13
+#define DT_ISP_LAST (DT_ISP8001 << 1)
+
+#define DT_IIDMA BIT_26
+#define DT_FWI2 BIT_27
+#define DT_ZIO_SUPPORTED BIT_28
+#define DT_OEM_001 BIT_29
+#define DT_ISP2200A BIT_30
+#define DT_EXTENDED_IDS BIT_31
+#define DT_MASK(ha) ((ha)->device_type & (DT_ISP_LAST - 1))
+#define IS_QLA2100(ha) (DT_MASK(ha) & DT_ISP2100)
+#define IS_QLA2200(ha) (DT_MASK(ha) & DT_ISP2200)
+#define IS_QLA2300(ha) (DT_MASK(ha) & DT_ISP2300)
+#define IS_QLA2312(ha) (DT_MASK(ha) & DT_ISP2312)
+#define IS_QLA2322(ha) (DT_MASK(ha) & DT_ISP2322)
+#define IS_QLA6312(ha) (DT_MASK(ha) & DT_ISP6312)
+#define IS_QLA6322(ha) (DT_MASK(ha) & DT_ISP6322)
+#define IS_QLA2422(ha) (DT_MASK(ha) & DT_ISP2422)
+#define IS_QLA2432(ha) (DT_MASK(ha) & DT_ISP2432)
+#define IS_QLA5422(ha) (DT_MASK(ha) & DT_ISP5422)
+#define IS_QLA5432(ha) (DT_MASK(ha) & DT_ISP5432)
+#define IS_QLA2532(ha) (DT_MASK(ha) & DT_ISP2532)
+#define IS_QLA8432(ha) (DT_MASK(ha) & DT_ISP8432)
+#define IS_QLA8001(ha) (DT_MASK(ha) & DT_ISP8001)
+
+#define IS_QLA23XX(ha) (IS_QLA2300(ha) || IS_QLA2312(ha) || IS_QLA2322(ha) || \
+ IS_QLA6312(ha) || IS_QLA6322(ha))
+#define IS_QLA24XX(ha) (IS_QLA2422(ha) || IS_QLA2432(ha))
+#define IS_QLA54XX(ha) (IS_QLA5422(ha) || IS_QLA5432(ha))
+#define IS_QLA25XX(ha) (IS_QLA2532(ha))
+#define IS_QLA84XX(ha) (IS_QLA8432(ha))
+#define IS_QLA24XX_TYPE(ha) (IS_QLA24XX(ha) || IS_QLA54XX(ha) || \
+ IS_QLA84XX(ha))
+#define IS_QLA81XX(ha) (IS_QLA8001(ha))
+#define IS_QLA2XXX_MIDTYPE(ha) (IS_QLA24XX(ha) || IS_QLA84XX(ha) || \
+ IS_QLA25XX(ha) || IS_QLA81XX(ha))
+#define IS_NOPOLLING_TYPE(ha) ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && \
+ (ha)->flags.msix_enabled)
+#define IS_FAC_REQUIRED(ha) (IS_QLA81XX(ha))
+#define IS_NOCACHE_VPD_TYPE(ha) (IS_QLA81XX(ha))
+
+#define IS_IIDMA_CAPABLE(ha) ((ha)->device_type & DT_IIDMA)
+#define IS_FWI2_CAPABLE(ha) ((ha)->device_type & DT_FWI2)
+#define IS_ZIO_SUPPORTED(ha) ((ha)->device_type & DT_ZIO_SUPPORTED)
+#define IS_OEM_001(ha) ((ha)->device_type & DT_OEM_001)
+#define HAS_EXTENDED_IDS(ha) ((ha)->device_type & DT_EXTENDED_IDS)
/* HBA serial number */
uint8_t serial0;
uint8_t serial2;
/* NVRAM configuration data */
-#define MAX_NVRAM_SIZE 4096
-#define VPD_OFFSET MAX_NVRAM_SIZE / 2
+#define MAX_NVRAM_SIZE 4096
+#define VPD_OFFSET MAX_NVRAM_SIZE / 2
uint16_t nvram_size;
uint16_t nvram_base;
void *nvram;
uint16_t r_a_tov;
int port_down_retry_count;
uint8_t mbx_count;
- uint16_t last_loop_id;
- uint16_t mgmt_svr_loop_id;
-
- uint32_t login_retry_count;
- int max_q_depth;
-
- struct list_head work_list;
-
- /* Fibre Channel Device List. */
- struct list_head fcports;
-
- /* RSCN queue. */
- uint32_t rscn_queue[MAX_RSCN_COUNT];
- uint8_t rscn_in_ptr;
- uint8_t rscn_out_ptr;
+ uint32_t login_retry_count;
/* SNS command interfaces. */
ms_iocb_entry_t *ms_iocb;
dma_addr_t ms_iocb_dma;
struct sns_cmd_pkt *sns_cmd;
dma_addr_t sns_cmd_dma;
-#define SFP_DEV_SIZE 256
-#define SFP_BLOCK_SIZE 64
- void *sfp_data;
- dma_addr_t sfp_data_dma;
+#define SFP_DEV_SIZE 256
+#define SFP_BLOCK_SIZE 64
+ void *sfp_data;
+ dma_addr_t sfp_data_dma;
- struct task_struct *dpc_thread;
- uint8_t dpc_active; /* DPC routine is active */
+ uint8_t *edc_data;
+ dma_addr_t edc_data_dma;
+ uint16_t edc_data_len;
- /* Timeout timers. */
- uint8_t loop_down_abort_time; /* port down timer */
- atomic_t loop_down_timer; /* loop down timer */
- uint8_t link_down_timeout; /* link down timeout */
+#define XGMAC_DATA_SIZE PAGE_SIZE
+ void *xgmac_data;
+ dma_addr_t xgmac_data_dma;
- uint32_t timer_active;
- struct timer_list timer;
+#define DCBX_TLV_DATA_SIZE PAGE_SIZE
+ void *dcbx_tlv;
+ dma_addr_t dcbx_tlv_dma;
+
+ struct task_struct *dpc_thread;
+ uint8_t dpc_active; /* DPC routine is active */
dma_addr_t gid_list_dma;
struct gid_list_info *gid_list;
int gid_list_info_size;
/* Small DMA pool allocations -- maximum 256 bytes in length. */
-#define DMA_POOL_SIZE 256
+#define DMA_POOL_SIZE 256
struct dma_pool *s_dma_pool;
dma_addr_t init_cb_dma;
init_cb_t *init_cb;
int init_cb_size;
+ dma_addr_t ex_init_cb_dma;
+ struct ex_init_cb_81xx *ex_init_cb;
/* These are used by mailbox operations. */
volatile uint16_t mailbox_out[MAILBOX_REGISTER_COUNT];
mbx_cmd_t *mcp;
unsigned long mbx_cmd_flags;
-#define MBX_INTERRUPT 1
-#define MBX_INTR_WAIT 2
+#define MBX_INTERRUPT 1
+#define MBX_INTR_WAIT 2
#define MBX_UPDATE_FLASH_ACTIVE 3
- struct semaphore vport_sem; /* Virtual port synchronization */
- struct completion mbx_cmd_comp; /* Serialize mbx access */
+ struct mutex vport_lock; /* Virtual port synchronization */
+ struct completion mbx_cmd_comp; /* Serialize mbx access */
struct completion mbx_intr_comp; /* Used for completion notification */
- uint32_t mbx_flags;
-#define MBX_IN_PROGRESS BIT_0
-#define MBX_BUSY BIT_1 /* Got the Access */
-#define MBX_SLEEPING_ON_SEM BIT_2
-#define MBX_POLLING_FOR_COMP BIT_3
-#define MBX_COMPLETED BIT_4
-#define MBX_TIMEDOUT BIT_5
-#define MBX_ACCESS_TIMEDOUT BIT_6
-
- mbx_cmd_t mc;
-
/* Basic firmware related information. */
uint16_t fw_major_version;
uint16_t fw_minor_version;
#define RISC_START_ADDRESS_2100 0x1000
#define RISC_START_ADDRESS_2300 0x800
#define RISC_START_ADDRESS_2400 0x100000
+ uint16_t fw_xcb_count;
- uint16_t fw_options[16]; /* slots: 1,2,3,10,11 */
+ uint16_t fw_options[16]; /* slots: 1,2,3,10,11 */
uint8_t fw_seriallink_options[4];
uint16_t fw_seriallink_options24[4];
+ uint8_t mpi_version[3];
+ uint32_t mpi_capabilities;
+ uint8_t phy_version[3];
+
/* Firmware dump information. */
struct qla2xxx_fw_dump *fw_dump;
uint32_t fw_dump_len;
dma_addr_t eft_dma;
void *eft;
+ uint32_t chain_offset;
struct dentry *dfs_dir;
struct dentry *dfs_fce;
dma_addr_t fce_dma;
uint64_t fce_wr, fce_rd;
struct mutex fce_mutex;
- uint32_t hw_event_start;
- uint32_t hw_event_ptr;
- uint32_t hw_event_pause_errors;
-
- uint8_t host_str[16];
uint32_t pci_attr;
uint16_t chip_revision;
uint8_t model_number[16+1];
#define BINZERO "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"
- char *model_desc;
+ char model_desc[80];
uint8_t adapter_id[16+1];
- uint8_t *node_name;
- uint8_t *port_name;
- uint8_t fabric_node_name[WWN_SIZE];
- uint32_t isp_abort_cnt;
-
/* Option ROM information. */
char *optrom_buffer;
uint32_t optrom_size;
uint32_t optrom_region_start;
uint32_t optrom_region_size;
- /* PCI expansion ROM image information. */
+/* PCI expansion ROM image information. */
#define ROM_CODE_TYPE_BIOS 0
#define ROM_CODE_TYPE_FCODE 1
#define ROM_CODE_TYPE_EFI 3
- uint8_t bios_revision[2];
- uint8_t efi_revision[2];
- uint8_t fcode_revision[16];
+ uint8_t bios_revision[2];
+ uint8_t efi_revision[2];
+ uint8_t fcode_revision[16];
uint32_t fw_revision[4];
+ /* Offsets for flash/nvram access (set to ~0 if not used). */
+ uint32_t flash_conf_off;
+ uint32_t flash_data_off;
+ uint32_t nvram_conf_off;
+ uint32_t nvram_data_off;
+
+ uint32_t fdt_wrt_disable;
+ uint32_t fdt_erase_cmd;
+ uint32_t fdt_block_size;
+ uint32_t fdt_unprotect_sec_cmd;
+ uint32_t fdt_protect_sec_cmd;
+
+ uint32_t flt_region_flt;
+ uint32_t flt_region_fdt;
+ uint32_t flt_region_boot;
+ uint32_t flt_region_fw;
+ uint32_t flt_region_vpd_nvram;
+ uint32_t flt_region_vpd;
+ uint32_t flt_region_nvram;
+ uint32_t flt_region_npiv_conf;
+ uint32_t flt_region_gold_fw;
+
/* Needed for BEACON */
- uint16_t beacon_blink_led;
- uint8_t beacon_color_state;
+ uint16_t beacon_blink_led;
+ uint8_t beacon_color_state;
#define QLA_LED_GRN_ON 0x01
#define QLA_LED_YLW_ON 0x02
#define QLA_LED_ABR_ON 0x04
#define QLA_LED_ALL_ON 0x07 /* yellow, green, amber. */
/* ISP2322: red, green, amber. */
-
- uint16_t zio_mode;
- uint16_t zio_timer;
+ uint16_t zio_mode;
+ uint16_t zio_timer;
struct fc_host_statistics fc_host_stat;
- struct qla_msix_entry msix_entries[QLA_MSIX_ENTRIES];
+ struct qla_msix_entry *msix_entries;
+
+ struct list_head vp_list; /* list of VP */
+ unsigned long vp_idx_map[(MAX_MULTI_ID_FABRIC / 8) /
+ sizeof(unsigned long)];
+ uint16_t num_vhosts; /* number of vports created */
+ uint16_t num_vsans; /* number of vsan created */
+ uint16_t max_npiv_vports; /* 63 or 125 per topoloty */
+ int cur_vport_count;
+
+ struct qla_chip_state_84xx *cs84xx;
+ struct qla_statistics qla_stats;
+ struct isp_operations *isp_ops;
+ struct workqueue_struct *wq;
+};
+
+/*
+ * Qlogic scsi host structure
+ */
+typedef struct scsi_qla_host {
+ struct list_head list;
+ struct list_head vp_fcports; /* list of fcports */
+ struct list_head work_list;
+ spinlock_t work_lock;
+
+ /* Commonly used flags and state information. */
+ struct Scsi_Host *host;
+ unsigned long host_no;
+ uint8_t host_str[16];
+
+ volatile struct {
+ uint32_t init_done :1;
+ uint32_t online :1;
+ uint32_t rscn_queue_overflow :1;
+ uint32_t reset_active :1;
+
+ uint32_t management_server_logged_in :1;
+ uint32_t process_response_queue :1;
+ } flags;
+
+ atomic_t loop_state;
+#define LOOP_TIMEOUT 1
+#define LOOP_DOWN 2
+#define LOOP_UP 3
+#define LOOP_UPDATE 4
+#define LOOP_READY 5
+#define LOOP_DEAD 6
+
+ unsigned long dpc_flags;
+#define RESET_MARKER_NEEDED 0 /* Send marker to ISP. */
+#define RESET_ACTIVE 1
+#define ISP_ABORT_NEEDED 2 /* Initiate ISP abort. */
+#define ABORT_ISP_ACTIVE 3 /* ISP abort in progress. */
+#define LOOP_RESYNC_NEEDED 4 /* Device Resync needed. */
+#define LOOP_RESYNC_ACTIVE 5
+#define LOCAL_LOOP_UPDATE 6 /* Perform a local loop update. */
+#define RSCN_UPDATE 7 /* Perform an RSCN update. */
+#define RELOGIN_NEEDED 8
+#define REGISTER_FC4_NEEDED 9 /* SNS FC4 registration required. */
+#define ISP_ABORT_RETRY 10 /* ISP aborted. */
+#define BEACON_BLINK_NEEDED 11
+#define REGISTER_FDMI_NEEDED 12
+#define FCPORT_UPDATE_NEEDED 13
+#define VP_DPC_NEEDED 14 /* wake up for VP dpc handling */
+#define UNLOADING 15
+#define NPIV_CONFIG_NEEDED 16
+
+ uint32_t device_flags;
+#define SWITCH_FOUND BIT_0
+#define DFLG_NO_CABLE BIT_1
+
+ /* ISP configuration data. */
+ uint16_t loop_id; /* Host adapter loop id */
+
+ port_id_t d_id; /* Host adapter port id */
+ uint8_t marker_needed;
+ uint16_t mgmt_svr_loop_id;
+
+
+
+ /* RSCN queue. */
+ uint32_t rscn_queue[MAX_RSCN_COUNT];
+ uint8_t rscn_in_ptr;
+ uint8_t rscn_out_ptr;
+
+ /* Timeout timers. */
+ uint8_t loop_down_abort_time; /* port down timer */
+ atomic_t loop_down_timer; /* loop down timer */
+ uint8_t link_down_timeout; /* link down timeout */
+
+ uint32_t timer_active;
+ struct timer_list timer;
+
+ uint8_t node_name[WWN_SIZE];
+ uint8_t port_name[WWN_SIZE];
+ uint8_t fabric_node_name[WWN_SIZE];
+
+ uint16_t fcoe_vlan_id;
+ uint16_t fcoe_fcf_idx;
+ uint8_t fcoe_vn_port_mac[6];
+
+ uint32_t vp_abort_cnt;
- struct list_head vp_list; /* list of VP */
struct fc_vport *fc_vport; /* holds fc_vport * for each vport */
- unsigned long vp_idx_map[(MAX_MULTI_ID_FABRIC / 8) / sizeof(unsigned long)];
- uint16_t num_vhosts; /* number of vports created */
- uint16_t num_vsans; /* number of vsan created */
uint16_t vp_idx; /* vport ID */
- struct scsi_qla_host *parent; /* holds pport */
unsigned long vp_flags;
- struct list_head vp_fcports; /* list of fcports */
#define VP_IDX_ACQUIRED 0 /* bit no 0 */
#define VP_CREATE_NEEDED 1
#define VP_BIND_NEEDED 2
#define VP_ERR_FAB_NORESOURCES 3
#define VP_ERR_FAB_LOGOUT 4
#define VP_ERR_ADAP_NORESOURCES 5
- uint16_t max_npiv_vports; /* 63 or 125 per topoloty */
- int cur_vport_count;
+ struct qla_hw_data *hw;
+ struct req_que *req;
} scsi_qla_host_t;
-
/*
* Macros to help code, maintain, etc.
*/
#define OPTROM_SIZE_2322 0x100000
#define OPTROM_SIZE_24XX 0x100000
#define OPTROM_SIZE_25XX 0x200000
+#define OPTROM_SIZE_81XX 0x400000
#include "qla_gbl.h"
#include "qla_dbg.h"
#include "qla_inline.h"
#define CMD_SP(Cmnd) ((Cmnd)->SCp.ptr)
-#define CMD_COMPL_STATUS(Cmnd) ((Cmnd)->SCp.this_residual)
-#define CMD_RESID_LEN(Cmnd) ((Cmnd)->SCp.buffers_residual)
-#define CMD_SCSI_STATUS(Cmnd) ((Cmnd)->SCp.Status)
-#define CMD_ACTUAL_SNSLEN(Cmnd) ((Cmnd)->SCp.Message)
-#define CMD_ENTRY_STATUS(Cmnd) ((Cmnd)->SCp.have_data_in)
#endif
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff