* 2 of the License, or (at your option) any later version.
*
* FILE : megaraid_sas.c
- * Version : v00.00.03.01
+ * Version : v00.00.03.10-rc5
*
* Authors:
- * Sreenivas Bagalkote <Sreenivas.Bagalkote@lsil.com>
- * Sumant Patro <Sumant.Patro@lsil.com>
+ * (email-id : megaraidlinux@lsi.com)
+ * Sreenivas Bagalkote
+ * Sumant Patro
+ * Bo Yang
*
* List of supported controllers
*
#include <linux/moduleparam.h>
#include <linux/module.h>
#include <linux/spinlock.h>
+#include <linux/mutex.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/uio.h>
#include <asm/uaccess.h>
#include <linux/fs.h>
#include <linux/compat.h>
+#include <linux/blkdev.h>
#include <linux/mutex.h>
#include <scsi/scsi.h>
MODULE_LICENSE("GPL");
MODULE_VERSION(MEGASAS_VERSION);
-MODULE_AUTHOR("sreenivas.bagalkote@lsil.com");
+MODULE_AUTHOR("megaraidlinux@lsi.com");
MODULE_DESCRIPTION("LSI Logic MegaRAID SAS Driver");
/*
*/
static struct pci_device_id megasas_pci_table[] = {
- {
- PCI_VENDOR_ID_LSI_LOGIC,
- PCI_DEVICE_ID_LSI_SAS1064R, /* xscale IOP */
- PCI_ANY_ID,
- PCI_ANY_ID,
- },
- {
- PCI_VENDOR_ID_LSI_LOGIC,
- PCI_DEVICE_ID_LSI_SAS1078R, /* ppc IOP */
- PCI_ANY_ID,
- PCI_ANY_ID,
- },
- {
- PCI_VENDOR_ID_LSI_LOGIC,
- PCI_DEVICE_ID_LSI_VERDE_ZCR, /* xscale IOP, vega */
- PCI_ANY_ID,
- PCI_ANY_ID,
- },
- {
- PCI_VENDOR_ID_DELL,
- PCI_DEVICE_ID_DELL_PERC5, /* xscale IOP */
- PCI_ANY_ID,
- PCI_ANY_ID,
- },
- {0} /* Terminating entry */
+ {PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1064R)},
+ /* xscale IOP */
+ {PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1078R)},
+ /* ppc IOP */
+ {PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_VERDE_ZCR)},
+ /* xscale IOP, vega */
+ {PCI_DEVICE(PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_PERC5)},
+ /* xscale IOP */
+ {}
};
MODULE_DEVICE_TABLE(pci, megasas_pci_table);
static struct fasync_struct *megasas_async_queue;
static DEFINE_MUTEX(megasas_async_queue_mutex);
+static u32 megasas_dbg_lvl;
+
/**
* megasas_get_cmd - Get a command from the free pool
* @instance: Adapter soft state
}
/**
+ * megasas_disable_intr_xscale -Disables interrupt
+ * @regs: MFI register set
+ */
+static inline void
+megasas_disable_intr_xscale(struct megasas_register_set __iomem * regs)
+{
+ u32 mask = 0x1f;
+ writel(mask, ®s->outbound_intr_mask);
+ /* Dummy readl to force pci flush */
+ readl(®s->outbound_intr_mask);
+}
+
+/**
* megasas_read_fw_status_reg_xscale - returns the current FW status value
* @regs: MFI register set
*/
.fire_cmd = megasas_fire_cmd_xscale,
.enable_intr = megasas_enable_intr_xscale,
+ .disable_intr = megasas_disable_intr_xscale,
.clear_intr = megasas_clear_intr_xscale,
.read_fw_status_reg = megasas_read_fw_status_reg_xscale,
};
}
/**
+ * megasas_disable_intr_ppc - Disable interrupt
+ * @regs: MFI register set
+ */
+static inline void
+megasas_disable_intr_ppc(struct megasas_register_set __iomem * regs)
+{
+ u32 mask = 0xFFFFFFFF;
+ writel(mask, ®s->outbound_intr_mask);
+ /* Dummy readl to force pci flush */
+ readl(®s->outbound_intr_mask);
+}
+
+/**
* megasas_read_fw_status_reg_ppc - returns the current FW status value
* @regs: MFI register set
*/
.fire_cmd = megasas_fire_cmd_ppc,
.enable_intr = megasas_enable_intr_ppc,
+ .disable_intr = megasas_disable_intr_ppc,
.clear_intr = megasas_clear_intr_ppc,
.read_fw_status_reg = megasas_read_fw_status_reg_ppc,
};
*/
/**
- * megasas_disable_intr - Disables interrupts
- * @regs: MFI register set
- */
-static inline void
-megasas_disable_intr(struct megasas_instance *instance)
-{
- u32 mask = 0x1f;
- struct megasas_register_set __iomem *regs = instance->reg_set;
-
- if(instance->pdev->device == PCI_DEVICE_ID_LSI_SAS1078R)
- mask = 0xffffffff;
-
- writel(mask, ®s->outbound_intr_mask);
-
- /* Dummy readl to force pci flush */
- readl(®s->outbound_intr_mask);
-}
-
-/**
* megasas_issue_polled - Issues a polling command
* @instance: Adapter soft state
* @cmd: Command packet to be issued
* @cmd: Command to be issued
*
* This function waits on an event for the command to be returned from ISR.
+ * Max wait time is MEGASAS_INTERNAL_CMD_WAIT_TIME secs
* Used to issue ioctl commands.
*/
static int
instance->instancet->fire_cmd(cmd->frame_phys_addr ,0,instance->reg_set);
- wait_event(instance->int_cmd_wait_q, (cmd->cmd_status != ENODATA));
+ wait_event_timeout(instance->int_cmd_wait_q, (cmd->cmd_status != ENODATA),
+ MEGASAS_INTERNAL_CMD_WAIT_TIME*HZ);
return 0;
}
*
* MFI firmware can abort previously issued AEN comamnd (automatic event
* notification). The megasas_issue_blocked_abort_cmd() issues such abort
- * cmd and blocks till it is completed.
+ * cmd and waits for return status.
+ * Max wait time is MEGASAS_INTERNAL_CMD_WAIT_TIME secs
*/
static int
megasas_issue_blocked_abort_cmd(struct megasas_instance *instance,
/*
* Wait for this cmd to complete
*/
- wait_event(instance->abort_cmd_wait_q, (cmd->cmd_status != 0xFF));
+ wait_event_timeout(instance->abort_cmd_wait_q, (cmd->cmd_status != 0xFF),
+ MEGASAS_INTERNAL_CMD_WAIT_TIME*HZ);
megasas_return_cmd(instance, cmd);
return 0;
int sge_count;
struct scatterlist *os_sgl;
- /*
- * Return 0 if there is no data transfer
- */
- if (!scp->request_buffer || !scp->request_bufflen)
- return 0;
-
- if (!scp->use_sg) {
- mfi_sgl->sge32[0].phys_addr = pci_map_single(instance->pdev,
- scp->
- request_buffer,
- scp->
- request_bufflen,
- scp->
- sc_data_direction);
- mfi_sgl->sge32[0].length = scp->request_bufflen;
-
- return 1;
- }
+ sge_count = scsi_dma_map(scp);
+ BUG_ON(sge_count < 0);
- os_sgl = (struct scatterlist *)scp->request_buffer;
- sge_count = pci_map_sg(instance->pdev, os_sgl, scp->use_sg,
- scp->sc_data_direction);
-
- for (i = 0; i < sge_count; i++, os_sgl++) {
- mfi_sgl->sge32[i].length = sg_dma_len(os_sgl);
- mfi_sgl->sge32[i].phys_addr = sg_dma_address(os_sgl);
+ if (sge_count) {
+ scsi_for_each_sg(scp, os_sgl, sge_count, i) {
+ mfi_sgl->sge32[i].length = sg_dma_len(os_sgl);
+ mfi_sgl->sge32[i].phys_addr = sg_dma_address(os_sgl);
+ }
}
-
return sge_count;
}
int sge_count;
struct scatterlist *os_sgl;
- /*
- * Return 0 if there is no data transfer
- */
- if (!scp->request_buffer || !scp->request_bufflen)
- return 0;
+ sge_count = scsi_dma_map(scp);
+ BUG_ON(sge_count < 0);
+
+ if (sge_count) {
+ scsi_for_each_sg(scp, os_sgl, sge_count, i) {
+ mfi_sgl->sge64[i].length = sg_dma_len(os_sgl);
+ mfi_sgl->sge64[i].phys_addr = sg_dma_address(os_sgl);
+ }
+ }
+ return sge_count;
+}
- if (!scp->use_sg) {
- mfi_sgl->sge64[0].phys_addr = pci_map_single(instance->pdev,
- scp->
- request_buffer,
- scp->
- request_bufflen,
- scp->
- sc_data_direction);
+ /**
+ * megasas_get_frame_count - Computes the number of frames
+ * @sge_count : number of sg elements
+ *
+ * Returns the number of frames required for numnber of sge's (sge_count)
+ */
- mfi_sgl->sge64[0].length = scp->request_bufflen;
+static u32 megasas_get_frame_count(u8 sge_count)
+{
+ int num_cnt;
+ int sge_bytes;
+ u32 sge_sz;
+ u32 frame_count=0;
- return 1;
- }
+ sge_sz = (IS_DMA64) ? sizeof(struct megasas_sge64) :
+ sizeof(struct megasas_sge32);
+
+ /*
+ * Main frame can contain 2 SGEs for 64-bit SGLs and
+ * 3 SGEs for 32-bit SGLs
+ */
+ if (IS_DMA64)
+ num_cnt = sge_count - 2;
+ else
+ num_cnt = sge_count - 3;
- os_sgl = (struct scatterlist *)scp->request_buffer;
- sge_count = pci_map_sg(instance->pdev, os_sgl, scp->use_sg,
- scp->sc_data_direction);
+ if(num_cnt>0){
+ sge_bytes = sge_sz * num_cnt;
- for (i = 0; i < sge_count; i++, os_sgl++) {
- mfi_sgl->sge64[i].length = sg_dma_len(os_sgl);
- mfi_sgl->sge64[i].phys_addr = sg_dma_address(os_sgl);
+ frame_count = (sge_bytes / MEGAMFI_FRAME_SIZE) +
+ ((sge_bytes % MEGAMFI_FRAME_SIZE) ? 1 : 0) ;
}
+ /* Main frame */
+ frame_count +=1;
- return sge_count;
+ if (frame_count > 7)
+ frame_count = 8;
+ return frame_count;
}
/**
megasas_build_dcdb(struct megasas_instance *instance, struct scsi_cmnd *scp,
struct megasas_cmd *cmd)
{
- u32 sge_sz;
- int sge_bytes;
u32 is_logical;
u32 device_id;
u16 flags = 0;
pthru->cdb_len = scp->cmd_len;
pthru->timeout = 0;
pthru->flags = flags;
- pthru->data_xfer_len = scp->request_bufflen;
+ pthru->data_xfer_len = scsi_bufflen(scp);
memcpy(pthru->cdb, scp->cmnd, scp->cmd_len);
/*
* Construct SGL
*/
- sge_sz = (IS_DMA64) ? sizeof(struct megasas_sge64) :
- sizeof(struct megasas_sge32);
-
if (IS_DMA64) {
pthru->flags |= MFI_FRAME_SGL64;
pthru->sge_count = megasas_make_sgl64(instance, scp,
pthru->sense_buf_phys_addr_hi = 0;
pthru->sense_buf_phys_addr_lo = cmd->sense_phys_addr;
- sge_bytes = sge_sz * pthru->sge_count;
-
/*
* Compute the total number of frames this command consumes. FW uses
* this number to pull sufficient number of frames from host memory.
*/
- cmd->frame_count = (sge_bytes / MEGAMFI_FRAME_SIZE) +
- ((sge_bytes % MEGAMFI_FRAME_SIZE) ? 1 : 0) + 1;
-
- if (cmd->frame_count > 7)
- cmd->frame_count = 8;
+ cmd->frame_count = megasas_get_frame_count(pthru->sge_count);
return cmd->frame_count;
}
megasas_build_ldio(struct megasas_instance *instance, struct scsi_cmnd *scp,
struct megasas_cmd *cmd)
{
- u32 sge_sz;
- int sge_bytes;
u32 device_id;
u8 sc = scp->cmnd[0];
u16 flags = 0;
flags = MFI_FRAME_DIR_READ;
/*
- * Preare the Logical IO frame: 2nd bit is zero for all read cmds
+ * Prepare the Logical IO frame: 2nd bit is zero for all read cmds
*/
ldio->cmd = (sc & 0x02) ? MFI_CMD_LD_WRITE : MFI_CMD_LD_READ;
ldio->cmd_status = 0x0;
/*
* Construct SGL
*/
- sge_sz = (IS_DMA64) ? sizeof(struct megasas_sge64) :
- sizeof(struct megasas_sge32);
-
if (IS_DMA64) {
ldio->flags |= MFI_FRAME_SGL64;
ldio->sge_count = megasas_make_sgl64(instance, scp, &ldio->sgl);
ldio->sense_buf_phys_addr_hi = 0;
ldio->sense_buf_phys_addr_lo = cmd->sense_phys_addr;
- sge_bytes = sge_sz * ldio->sge_count;
-
- cmd->frame_count = (sge_bytes / MEGAMFI_FRAME_SIZE) +
- ((sge_bytes % MEGAMFI_FRAME_SIZE) ? 1 : 0) + 1;
-
- if (cmd->frame_count > 7)
- cmd->frame_count = 8;
+ /*
+ * Compute the total number of frames this command consumes. FW uses
+ * this number to pull sufficient number of frames from host memory.
+ */
+ cmd->frame_count = megasas_get_frame_count(ldio->sge_count);
return cmd->frame_count;
}
}
}
+ /**
+ * megasas_dump_pending_frames - Dumps the frame address of all pending cmds
+ * in FW
+ * @instance: Adapter soft state
+ */
+static inline void
+megasas_dump_pending_frames(struct megasas_instance *instance)
+{
+ struct megasas_cmd *cmd;
+ int i,n;
+ union megasas_sgl *mfi_sgl;
+ struct megasas_io_frame *ldio;
+ struct megasas_pthru_frame *pthru;
+ u32 sgcount;
+ u32 max_cmd = instance->max_fw_cmds;
+
+ printk(KERN_ERR "\nmegasas[%d]: Dumping Frame Phys Address of all pending cmds in FW\n",instance->host->host_no);
+ printk(KERN_ERR "megasas[%d]: Total OS Pending cmds : %d\n",instance->host->host_no,atomic_read(&instance->fw_outstanding));
+ if (IS_DMA64)
+ printk(KERN_ERR "\nmegasas[%d]: 64 bit SGLs were sent to FW\n",instance->host->host_no);
+ else
+ printk(KERN_ERR "\nmegasas[%d]: 32 bit SGLs were sent to FW\n",instance->host->host_no);
+
+ printk(KERN_ERR "megasas[%d]: Pending OS cmds in FW : \n",instance->host->host_no);
+ for (i = 0; i < max_cmd; i++) {
+ cmd = instance->cmd_list[i];
+ if(!cmd->scmd)
+ continue;
+ printk(KERN_ERR "megasas[%d]: Frame addr :0x%08lx : ",instance->host->host_no,(unsigned long)cmd->frame_phys_addr);
+ if (megasas_is_ldio(cmd->scmd)){
+ ldio = (struct megasas_io_frame *)cmd->frame;
+ mfi_sgl = &ldio->sgl;
+ sgcount = ldio->sge_count;
+ printk(KERN_ERR "megasas[%d]: frame count : 0x%x, Cmd : 0x%x, Tgt id : 0x%x, lba lo : 0x%x, lba_hi : 0x%x, sense_buf addr : 0x%x,sge count : 0x%x\n",instance->host->host_no, cmd->frame_count,ldio->cmd,ldio->target_id, ldio->start_lba_lo,ldio->start_lba_hi,ldio->sense_buf_phys_addr_lo,sgcount);
+ }
+ else {
+ pthru = (struct megasas_pthru_frame *) cmd->frame;
+ mfi_sgl = &pthru->sgl;
+ sgcount = pthru->sge_count;
+ printk(KERN_ERR "megasas[%d]: frame count : 0x%x, Cmd : 0x%x, Tgt id : 0x%x, lun : 0x%x, cdb_len : 0x%x, data xfer len : 0x%x, sense_buf addr : 0x%x,sge count : 0x%x\n",instance->host->host_no,cmd->frame_count,pthru->cmd,pthru->target_id,pthru->lun,pthru->cdb_len , pthru->data_xfer_len,pthru->sense_buf_phys_addr_lo,sgcount);
+ }
+ if(megasas_dbg_lvl & MEGASAS_DBG_LVL){
+ for (n = 0; n < sgcount; n++){
+ if (IS_DMA64)
+ printk(KERN_ERR "megasas: sgl len : 0x%x, sgl addr : 0x%08lx ",mfi_sgl->sge64[n].length , (unsigned long)mfi_sgl->sge64[n].phys_addr) ;
+ else
+ printk(KERN_ERR "megasas: sgl len : 0x%x, sgl addr : 0x%x ",mfi_sgl->sge32[n].length , mfi_sgl->sge32[n].phys_addr) ;
+ }
+ }
+ printk(KERN_ERR "\n");
+ } /*for max_cmd*/
+ printk(KERN_ERR "\nmegasas[%d]: Pending Internal cmds in FW : \n",instance->host->host_no);
+ for (i = 0; i < max_cmd; i++) {
+
+ cmd = instance->cmd_list[i];
+
+ if(cmd->sync_cmd == 1){
+ printk(KERN_ERR "0x%08lx : ", (unsigned long)cmd->frame_phys_addr);
+ }
+ }
+ printk(KERN_ERR "megasas[%d]: Dumping Done.\n\n",instance->host->host_no);
+}
+
/**
* megasas_queue_command - Queue entry point
* @scmd: SCSI command to be queued
instance = (struct megasas_instance *)
scmd->device->host->hostdata;
+
+ /* Don't process if we have already declared adapter dead */
+ if (instance->hw_crit_error)
+ return SCSI_MLQUEUE_HOST_BUSY;
+
scmd->scsi_done = done;
scmd->result = 0;
goto out_done;
}
+ switch (scmd->cmnd[0]) {
+ case SYNCHRONIZE_CACHE:
+ /*
+ * FW takes care of flush cache on its own
+ * No need to send it down
+ */
+ scmd->result = DID_OK << 16;
+ goto out_done;
+ default:
+ break;
+ }
+
cmd = megasas_get_cmd(instance);
if (!cmd)
return SCSI_MLQUEUE_HOST_BUSY;
goto out_return_cmd;
cmd->scmd = scmd;
+ scmd->SCp.ptr = (char *)cmd;
/*
* Issue the command to the FW
* The RAID firmware may require extended timeouts.
*/
if (sdev->channel >= MEGASAS_MAX_PD_CHANNELS)
- sdev->timeout = 90 * HZ;
+ sdev->timeout = MEGASAS_DEFAULT_CMD_TIMEOUT * HZ;
return 0;
}
}
if (atomic_read(&instance->fw_outstanding)) {
+ /*
+ * Send signal to FW to stop processing any pending cmds.
+ * The controller will be taken offline by the OS now.
+ */
+ writel(MFI_STOP_ADP,
+ &instance->reg_set->inbound_doorbell);
+ megasas_dump_pending_frames(instance);
instance->hw_crit_error = 1;
return FAILED;
}
instance = (struct megasas_instance *)scmd->device->host->hostdata;
- scmd_printk(KERN_NOTICE, scmd, "megasas: RESET -%ld cmd=%x\n",
- scmd->serial_number, scmd->cmnd[0]);
+ scmd_printk(KERN_NOTICE, scmd, "megasas: RESET -%ld cmd=%x retries=%x\n",
+ scmd->serial_number, scmd->cmnd[0], scmd->retries);
if (instance->hw_crit_error) {
printk(KERN_ERR "megasas: cannot recover from previous reset "
}
/**
+ * megasas_reset_timer - quiesce the adapter if required
+ * @scmd: scsi cmnd
+ *
+ * Sets the FW busy flag and reduces the host->can_queue if the
+ * cmd has not been completed within the timeout period.
+ */
+static enum
+scsi_eh_timer_return megasas_reset_timer(struct scsi_cmnd *scmd)
+{
+ struct megasas_cmd *cmd = (struct megasas_cmd *)scmd->SCp.ptr;
+ struct megasas_instance *instance;
+ unsigned long flags;
+
+ if (time_after(jiffies, scmd->jiffies_at_alloc +
+ (MEGASAS_DEFAULT_CMD_TIMEOUT * 2) * HZ)) {
+ return EH_NOT_HANDLED;
+ }
+
+ instance = cmd->instance;
+ if (!(instance->flag & MEGASAS_FW_BUSY)) {
+ /* FW is busy, throttle IO */
+ spin_lock_irqsave(instance->host->host_lock, flags);
+
+ instance->host->can_queue = 16;
+ instance->last_time = jiffies;
+ instance->flag |= MEGASAS_FW_BUSY;
+
+ spin_unlock_irqrestore(instance->host->host_lock, flags);
+ }
+ return EH_RESET_TIMER;
+}
+
+/**
* megasas_reset_device - Device reset handler entry point
*/
static int megasas_reset_device(struct scsi_cmnd *scmd)
}
/**
+ * megasas_bios_param - Returns disk geometry for a disk
+ * @sdev: device handle
+ * @bdev: block device
+ * @capacity: drive capacity
+ * @geom: geometry parameters
+ */
+static int
+megasas_bios_param(struct scsi_device *sdev, struct block_device *bdev,
+ sector_t capacity, int geom[])
+{
+ int heads;
+ int sectors;
+ sector_t cylinders;
+ unsigned long tmp;
+ /* Default heads (64) & sectors (32) */
+ heads = 64;
+ sectors = 32;
+
+ tmp = heads * sectors;
+ cylinders = capacity;
+
+ sector_div(cylinders, tmp);
+
+ /*
+ * Handle extended translation size for logical drives > 1Gb
+ */
+
+ if (capacity >= 0x200000) {
+ heads = 255;
+ sectors = 63;
+ tmp = heads*sectors;
+ cylinders = capacity;
+ sector_div(cylinders, tmp);
+ }
+
+ geom[0] = heads;
+ geom[1] = sectors;
+ geom[2] = cylinders;
+
+ return 0;
+}
+
+/**
* megasas_service_aen - Processes an event notification
* @instance: Adapter soft state
* @cmd: AEN command completed by the ISR
.eh_device_reset_handler = megasas_reset_device,
.eh_bus_reset_handler = megasas_reset_bus_host,
.eh_host_reset_handler = megasas_reset_bus_host,
+ .eh_timed_out = megasas_reset_timer,
+ .bios_param = megasas_bios_param,
.use_clustering = ENABLE_CLUSTERING,
+ .use_sg_chaining = ENABLE_SG_CHAINING,
};
/**
}
/**
- * megasas_unmap_sgbuf - Unmap SG buffers
- * @instance: Adapter soft state
- * @cmd: Completed command
- */
-static void
-megasas_unmap_sgbuf(struct megasas_instance *instance, struct megasas_cmd *cmd)
-{
- dma_addr_t buf_h;
- u8 opcode;
-
- if (cmd->scmd->use_sg) {
- pci_unmap_sg(instance->pdev, cmd->scmd->request_buffer,
- cmd->scmd->use_sg, cmd->scmd->sc_data_direction);
- return;
- }
-
- if (!cmd->scmd->request_bufflen)
- return;
-
- opcode = cmd->frame->hdr.cmd;
-
- if ((opcode == MFI_CMD_LD_READ) || (opcode == MFI_CMD_LD_WRITE)) {
- if (IS_DMA64)
- buf_h = cmd->frame->io.sgl.sge64[0].phys_addr;
- else
- buf_h = cmd->frame->io.sgl.sge32[0].phys_addr;
- } else {
- if (IS_DMA64)
- buf_h = cmd->frame->pthru.sgl.sge64[0].phys_addr;
- else
- buf_h = cmd->frame->pthru.sgl.sge32[0].phys_addr;
- }
-
- pci_unmap_single(instance->pdev, buf_h, cmd->scmd->request_bufflen,
- cmd->scmd->sc_data_direction);
- return;
-}
-
-/**
* megasas_complete_cmd - Completes a command
* @instance: Adapter soft state
* @cmd: Command to be completed
int exception = 0;
struct megasas_header *hdr = &cmd->frame->hdr;
- if (cmd->scmd) {
- cmd->scmd->SCp.ptr = (char *)0;
- }
+ if (cmd->scmd)
+ cmd->scmd->SCp.ptr = NULL;
switch (hdr->cmd) {
atomic_dec(&instance->fw_outstanding);
- megasas_unmap_sgbuf(instance, cmd);
+ scsi_dma_unmap(cmd->scmd);
cmd->scmd->scsi_done(cmd->scmd);
megasas_return_cmd(instance, cmd);
atomic_dec(&instance->fw_outstanding);
- megasas_unmap_sgbuf(instance, cmd);
+ scsi_dma_unmap(cmd->scmd);
cmd->scmd->scsi_done(cmd->scmd);
megasas_return_cmd(instance, cmd);
static int
megasas_deplete_reply_queue(struct megasas_instance *instance, u8 alt_status)
{
- u32 producer;
- u32 consumer;
- u32 context;
- struct megasas_cmd *cmd;
-
/*
* Check if it is our interrupt
* Clear the interrupt
if(instance->instancet->clear_intr(instance->reg_set))
return IRQ_NONE;
- producer = *instance->producer;
- consumer = *instance->consumer;
-
- while (consumer != producer) {
- context = instance->reply_queue[consumer];
-
- cmd = instance->cmd_list[context];
-
- megasas_complete_cmd(instance, cmd, alt_status);
-
- consumer++;
- if (consumer == (instance->max_fw_cmds + 1)) {
- consumer = 0;
- }
- }
-
- *instance->consumer = producer;
-
+ if (instance->hw_crit_error)
+ goto out_done;
+ /*
+ * Schedule the tasklet for cmd completion
+ */
+ tasklet_schedule(&instance->isr_tasklet);
+out_done:
return IRQ_HANDLED;
}
/**
* megasas_isr - isr entry point
*/
-static irqreturn_t megasas_isr(int irq, void *devp, struct pt_regs *regs)
+static irqreturn_t megasas_isr(int irq, void *devp)
{
return megasas_deplete_reply_queue((struct megasas_instance *)devp,
DID_OK);
fw_state = instance->instancet->read_fw_status_reg(instance->reg_set) & MFI_STATE_MASK;
+ if (fw_state != MFI_STATE_READY)
+ printk(KERN_INFO "megasas: Waiting for FW to come to ready"
+ " state\n");
+
while (fw_state != MFI_STATE_READY) {
- printk(KERN_INFO "megasas: Waiting for FW to come to ready"
- " state\n");
switch (fw_state) {
case MFI_STATE_FAULT:
/*
* Set the CLR bit in inbound doorbell
*/
- writel(MFI_INIT_CLEAR_HANDSHAKE,
+ writel(MFI_INIT_CLEAR_HANDSHAKE|MFI_INIT_HOTPLUG,
&instance->reg_set->inbound_doorbell);
max_wait = 2;
cur_state = MFI_STATE_WAIT_HANDSHAKE;
break;
+ case MFI_STATE_BOOT_MESSAGE_PENDING:
+ writel(MFI_INIT_HOTPLUG,
+ &instance->reg_set->inbound_doorbell);
+
+ max_wait = 10;
+ cur_state = MFI_STATE_BOOT_MESSAGE_PENDING;
+ break;
+
case MFI_STATE_OPERATIONAL:
/*
- * Bring it to READY state; assuming max wait 2 secs
+ * Bring it to READY state; assuming max wait 10 secs
*/
- megasas_disable_intr(instance);
- writel(MFI_INIT_READY, &instance->reg_set->inbound_doorbell);
+ instance->instancet->disable_intr(instance->reg_set);
+ writel(MFI_RESET_FLAGS, &instance->reg_set->inbound_doorbell);
max_wait = 10;
cur_state = MFI_STATE_OPERATIONAL;
return -ENODEV;
}
};
+ printk(KERN_INFO "megasas: FW now in Ready state\n");
return 0;
}
cmd->frame_phys_addr);
if (cmd->sense)
- pci_pool_free(instance->sense_dma_pool, cmd->frame,
+ pci_pool_free(instance->sense_dma_pool, cmd->sense,
cmd->sense_phys_addr);
}
* Allocate the dynamic array first and then allocate individual
* commands.
*/
- instance->cmd_list = kmalloc(sizeof(struct megasas_cmd *) * max_cmd,
- GFP_KERNEL);
+ instance->cmd_list = kcalloc(max_cmd, sizeof(struct megasas_cmd*), GFP_KERNEL);
if (!instance->cmd_list) {
printk(KERN_DEBUG "megasas: out of memory\n");
return -ENOMEM;
}
- memset(instance->cmd_list, 0, sizeof(struct megasas_cmd *) * max_cmd);
for (i = 0; i < max_cmd; i++) {
instance->cmd_list[i] = kmalloc(sizeof(struct megasas_cmd),
}
/**
+ * megasas_complete_cmd_dpc - Returns FW's controller structure
+ * @instance_addr: Address of adapter soft state
+ *
+ * Tasklet to complete cmds
+ */
+static void megasas_complete_cmd_dpc(unsigned long instance_addr)
+{
+ u32 producer;
+ u32 consumer;
+ u32 context;
+ struct megasas_cmd *cmd;
+ struct megasas_instance *instance = (struct megasas_instance *)instance_addr;
+ unsigned long flags;
+
+ /* If we have already declared adapter dead, donot complete cmds */
+ if (instance->hw_crit_error)
+ return;
+
+ producer = *instance->producer;
+ consumer = *instance->consumer;
+
+ while (consumer != producer) {
+ context = instance->reply_queue[consumer];
+
+ cmd = instance->cmd_list[context];
+
+ megasas_complete_cmd(instance, cmd, DID_OK);
+
+ consumer++;
+ if (consumer == (instance->max_fw_cmds + 1)) {
+ consumer = 0;
+ }
+ }
+
+ *instance->consumer = producer;
+
+ /*
+ * Check if we can restore can_queue
+ */
+ if (instance->flag & MEGASAS_FW_BUSY
+ && time_after(jiffies, instance->last_time + 5 * HZ)
+ && atomic_read(&instance->fw_outstanding) < 17) {
+
+ spin_lock_irqsave(instance->host->host_lock, flags);
+ instance->flag &= ~MEGASAS_FW_BUSY;
+ instance->host->can_queue =
+ instance->max_fw_cmds - MEGASAS_INT_CMDS;
+
+ spin_unlock_irqrestore(instance->host->host_lock, flags);
+ }
+
+}
+
+/**
+ * megasas_issue_init_mfi - Initializes the FW
+ * @instance: Adapter soft state
+ *
+ * Issues the INIT MFI cmd
+ */
+static int
+megasas_issue_init_mfi(struct megasas_instance *instance)
+{
+ u32 context;
+
+ struct megasas_cmd *cmd;
+
+ struct megasas_init_frame *init_frame;
+ struct megasas_init_queue_info *initq_info;
+ dma_addr_t init_frame_h;
+ dma_addr_t initq_info_h;
+
+ /*
+ * Prepare a init frame. Note the init frame points to queue info
+ * structure. Each frame has SGL allocated after first 64 bytes. For
+ * this frame - since we don't need any SGL - we use SGL's space as
+ * queue info structure
+ *
+ * We will not get a NULL command below. We just created the pool.
+ */
+ cmd = megasas_get_cmd(instance);
+
+ init_frame = (struct megasas_init_frame *)cmd->frame;
+ initq_info = (struct megasas_init_queue_info *)
+ ((unsigned long)init_frame + 64);
+
+ init_frame_h = cmd->frame_phys_addr;
+ initq_info_h = init_frame_h + 64;
+
+ context = init_frame->context;
+ memset(init_frame, 0, MEGAMFI_FRAME_SIZE);
+ memset(initq_info, 0, sizeof(struct megasas_init_queue_info));
+ init_frame->context = context;
+
+ initq_info->reply_queue_entries = instance->max_fw_cmds + 1;
+ initq_info->reply_queue_start_phys_addr_lo = instance->reply_queue_h;
+
+ initq_info->producer_index_phys_addr_lo = instance->producer_h;
+ initq_info->consumer_index_phys_addr_lo = instance->consumer_h;
+
+ init_frame->cmd = MFI_CMD_INIT;
+ init_frame->cmd_status = 0xFF;
+ init_frame->queue_info_new_phys_addr_lo = initq_info_h;
+
+ init_frame->data_xfer_len = sizeof(struct megasas_init_queue_info);
+
+ /*
+ * disable the intr before firing the init frame to FW
+ */
+ instance->instancet->disable_intr(instance->reg_set);
+
+ /*
+ * Issue the init frame in polled mode
+ */
+
+ if (megasas_issue_polled(instance, cmd)) {
+ printk(KERN_ERR "megasas: Failed to init firmware\n");
+ megasas_return_cmd(instance, cmd);
+ goto fail_fw_init;
+ }
+
+ megasas_return_cmd(instance, cmd);
+
+ return 0;
+
+fail_fw_init:
+ return -EINVAL;
+}
+
+/**
* megasas_init_mfi - Initializes the FW
* @instance: Adapter soft state
*
u32 reply_q_sz;
u32 max_sectors_1;
u32 max_sectors_2;
+ u32 tmp_sectors;
struct megasas_register_set __iomem *reg_set;
-
- struct megasas_cmd *cmd;
struct megasas_ctrl_info *ctrl_info;
-
- struct megasas_init_frame *init_frame;
- struct megasas_init_queue_info *initq_info;
- dma_addr_t init_frame_h;
- dma_addr_t initq_info_h;
-
/*
* Map the message registers
*/
* Get various operational parameters from status register
*/
instance->max_fw_cmds = instance->instancet->read_fw_status_reg(reg_set) & 0x00FFFF;
+ /*
+ * Reduce the max supported cmds by 1. This is to ensure that the
+ * reply_q_sz (1 more than the max cmd that driver may send)
+ * does not exceed max cmds that the FW can support
+ */
+ instance->max_fw_cmds = instance->max_fw_cmds-1;
instance->max_num_sge = (instance->instancet->read_fw_status_reg(reg_set) & 0xFF0000) >>
0x10;
/*
goto fail_reply_queue;
}
- /*
- * Prepare a init frame. Note the init frame points to queue info
- * structure. Each frame has SGL allocated after first 64 bytes. For
- * this frame - since we don't need any SGL - we use SGL's space as
- * queue info structure
- *
- * We will not get a NULL command below. We just created the pool.
- */
- cmd = megasas_get_cmd(instance);
-
- init_frame = (struct megasas_init_frame *)cmd->frame;
- initq_info = (struct megasas_init_queue_info *)
- ((unsigned long)init_frame + 64);
-
- init_frame_h = cmd->frame_phys_addr;
- initq_info_h = init_frame_h + 64;
-
- memset(init_frame, 0, MEGAMFI_FRAME_SIZE);
- memset(initq_info, 0, sizeof(struct megasas_init_queue_info));
-
- initq_info->reply_queue_entries = instance->max_fw_cmds + 1;
- initq_info->reply_queue_start_phys_addr_lo = instance->reply_queue_h;
-
- initq_info->producer_index_phys_addr_lo = instance->producer_h;
- initq_info->consumer_index_phys_addr_lo = instance->consumer_h;
-
- init_frame->cmd = MFI_CMD_INIT;
- init_frame->cmd_status = 0xFF;
- init_frame->queue_info_new_phys_addr_lo = initq_info_h;
-
- init_frame->data_xfer_len = sizeof(struct megasas_init_queue_info);
-
- /*
- * disable the intr before firing the init frame to FW
- */
- megasas_disable_intr(instance);
-
- /*
- * Issue the init frame in polled mode
- */
- if (megasas_issue_polled(instance, cmd)) {
- printk(KERN_DEBUG "megasas: Failed to init firmware\n");
+ if (megasas_issue_init_mfi(instance))
goto fail_fw_init;
- }
-
- megasas_return_cmd(instance, cmd);
ctrl_info = kmalloc(sizeof(struct megasas_ctrl_info), GFP_KERNEL);
* Note that older firmwares ( < FW ver 30) didn't report information
* to calculate max_sectors_1. So the number ended up as zero always.
*/
+ tmp_sectors = 0;
if (ctrl_info && !megasas_get_ctrl_info(instance, ctrl_info)) {
max_sectors_1 = (1 << ctrl_info->stripe_sz_ops.min) *
ctrl_info->max_strips_per_io;
max_sectors_2 = ctrl_info->max_request_size;
- instance->max_sectors_per_req = (max_sectors_1 < max_sectors_2)
- ? max_sectors_1 : max_sectors_2;
- } else
- instance->max_sectors_per_req = instance->max_num_sge *
- PAGE_SIZE / 512;
+ tmp_sectors = min_t(u32, max_sectors_1 , max_sectors_2);
+ }
+
+ instance->max_sectors_per_req = instance->max_num_sge *
+ PAGE_SIZE / 512;
+ if (tmp_sectors && (instance->max_sectors_per_req > tmp_sectors))
+ instance->max_sectors_per_req = tmp_sectors;
kfree(ctrl_info);
+ /*
+ * Setup tasklet for cmd completion
+ */
+
+ tasklet_init(&instance->isr_tasklet, megasas_complete_cmd_dpc,
+ (unsigned long)instance);
return 0;
fail_fw_init:
- megasas_return_cmd(instance, cmd);
pci_free_consistent(instance->pdev, reply_q_sz,
instance->reply_queue, instance->reply_queue_h);
return 0;
}
+static int
+megasas_set_dma_mask(struct pci_dev *pdev)
+{
+ /*
+ * All our contollers are capable of performing 64-bit DMA
+ */
+ if (IS_DMA64) {
+ if (pci_set_dma_mask(pdev, DMA_64BIT_MASK) != 0) {
+
+ if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) != 0)
+ goto fail_set_dma_mask;
+ }
+ } else {
+ if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) != 0)
+ goto fail_set_dma_mask;
+ }
+ return 0;
+
+fail_set_dma_mask:
+ return 1;
+}
+
/**
* megasas_probe_one - PCI hotplug entry point
* @pdev: PCI device structure
pci_set_master(pdev);
- /*
- * All our contollers are capable of performing 64-bit DMA
- */
- if (IS_DMA64) {
- if (pci_set_dma_mask(pdev, DMA_64BIT_MASK) != 0) {
-
- if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) != 0)
- goto fail_set_dma_mask;
- }
- } else {
- if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) != 0)
- goto fail_set_dma_mask;
- }
+ if (megasas_set_dma_mask(pdev))
+ goto fail_set_dma_mask;
host = scsi_host_alloc(&megasas_template,
sizeof(struct megasas_instance));
spin_lock_init(&instance->cmd_pool_lock);
- sema_init(&instance->aen_mutex, 1);
+ mutex_init(&instance->aen_mutex);
sema_init(&instance->ioctl_sem, MEGASAS_INT_CMDS);
/*
instance->unique_id = pdev->bus->number << 8 | pdev->devfn;
instance->init_id = MEGASAS_DEFAULT_INIT_ID;
+ megasas_dbg_lvl = 0;
+ instance->flag = 0;
+ instance->last_time = 0;
+
/*
* Initialize MFI Firmware
*/
/*
* Register IRQ
*/
- if (request_irq(pdev->irq, megasas_isr, SA_SHIRQ, "megasas", instance)) {
+ if (request_irq(pdev->irq, megasas_isr, IRQF_SHARED, "megasas", instance)) {
printk(KERN_DEBUG "megasas: Failed to register IRQ\n");
goto fail_irq;
}
megasas_mgmt_info.max_index--;
pci_set_drvdata(pdev, NULL);
- megasas_disable_intr(instance);
+ instance->instancet->disable_intr(instance->reg_set);
free_irq(instance->pdev->irq, instance);
megasas_release_mfi(instance);
/**
* megasas_shutdown_controller - Instructs FW to shutdown the controller
* @instance: Adapter soft state
+ * @opcode: Shutdown/Hibernate
*/
-static void megasas_shutdown_controller(struct megasas_instance *instance)
+static void megasas_shutdown_controller(struct megasas_instance *instance,
+ u32 opcode)
{
struct megasas_cmd *cmd;
struct megasas_dcmd_frame *dcmd;
dcmd->flags = MFI_FRAME_DIR_NONE;
dcmd->timeout = 0;
dcmd->data_xfer_len = 0;
- dcmd->opcode = MR_DCMD_CTRL_SHUTDOWN;
+ dcmd->opcode = opcode;
megasas_issue_blocked_cmd(instance, cmd);
}
/**
+ * megasas_suspend - driver suspend entry point
+ * @pdev: PCI device structure
+ * @state: PCI power state to suspend routine
+ */
+static int __devinit
+megasas_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct Scsi_Host *host;
+ struct megasas_instance *instance;
+
+ instance = pci_get_drvdata(pdev);
+ host = instance->host;
+
+ megasas_flush_cache(instance);
+ megasas_shutdown_controller(instance, MR_DCMD_HIBERNATE_SHUTDOWN);
+ tasklet_kill(&instance->isr_tasklet);
+
+ pci_set_drvdata(instance->pdev, instance);
+ instance->instancet->disable_intr(instance->reg_set);
+ free_irq(instance->pdev->irq, instance);
+
+ pci_save_state(pdev);
+ pci_disable_device(pdev);
+
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
+
+ return 0;
+}
+
+/**
+ * megasas_resume- driver resume entry point
+ * @pdev: PCI device structure
+ */
+static int __devinit
+megasas_resume(struct pci_dev *pdev)
+{
+ int rval;
+ struct Scsi_Host *host;
+ struct megasas_instance *instance;
+
+ instance = pci_get_drvdata(pdev);
+ host = instance->host;
+ pci_set_power_state(pdev, PCI_D0);
+ pci_enable_wake(pdev, PCI_D0, 0);
+ pci_restore_state(pdev);
+
+ /*
+ * PCI prepping: enable device set bus mastering and dma mask
+ */
+ rval = pci_enable_device(pdev);
+
+ if (rval) {
+ printk(KERN_ERR "megasas: Enable device failed\n");
+ return rval;
+ }
+
+ pci_set_master(pdev);
+
+ if (megasas_set_dma_mask(pdev))
+ goto fail_set_dma_mask;
+
+ /*
+ * Initialize MFI Firmware
+ */
+
+ *instance->producer = 0;
+ *instance->consumer = 0;
+
+ atomic_set(&instance->fw_outstanding, 0);
+
+ /*
+ * We expect the FW state to be READY
+ */
+ if (megasas_transition_to_ready(instance))
+ goto fail_ready_state;
+
+ if (megasas_issue_init_mfi(instance))
+ goto fail_init_mfi;
+
+ tasklet_init(&instance->isr_tasklet, megasas_complete_cmd_dpc,
+ (unsigned long)instance);
+
+ /*
+ * Register IRQ
+ */
+ if (request_irq(pdev->irq, megasas_isr, IRQF_SHARED,
+ "megasas", instance)) {
+ printk(KERN_ERR "megasas: Failed to register IRQ\n");
+ goto fail_irq;
+ }
+
+ instance->instancet->enable_intr(instance->reg_set);
+
+ /*
+ * Initiate AEN (Asynchronous Event Notification)
+ */
+ if (megasas_start_aen(instance))
+ printk(KERN_ERR "megasas: Start AEN failed\n");
+
+ return 0;
+
+fail_irq:
+fail_init_mfi:
+ if (instance->evt_detail)
+ pci_free_consistent(pdev, sizeof(struct megasas_evt_detail),
+ instance->evt_detail,
+ instance->evt_detail_h);
+
+ if (instance->producer)
+ pci_free_consistent(pdev, sizeof(u32), instance->producer,
+ instance->producer_h);
+ if (instance->consumer)
+ pci_free_consistent(pdev, sizeof(u32), instance->consumer,
+ instance->consumer_h);
+ scsi_host_put(host);
+
+fail_set_dma_mask:
+fail_ready_state:
+
+ pci_disable_device(pdev);
+
+ return -ENODEV;
+}
+
+/**
* megasas_detach_one - PCI hot"un"plug entry point
* @pdev: PCI device structure
*/
scsi_remove_host(instance->host);
megasas_flush_cache(instance);
- megasas_shutdown_controller(instance);
+ megasas_shutdown_controller(instance, MR_DCMD_CTRL_SHUTDOWN);
+ tasklet_kill(&instance->isr_tasklet);
/*
* Take the instance off the instance array. Note that we will not
pci_set_drvdata(instance->pdev, NULL);
- megasas_disable_intr(instance);
+ instance->instancet->disable_intr(instance->reg_set);
free_irq(instance->pdev->irq, instance);
void *sense = NULL;
dma_addr_t sense_handle;
u32 *sense_ptr;
+ unsigned long *sense_buff;
memset(kbuff_arr, 0, sizeof(kbuff_arr));
* For each user buffer, create a mirror buffer and copy in
*/
for (i = 0; i < ioc->sge_count; i++) {
- kbuff_arr[i] = pci_alloc_consistent(instance->pdev,
+ kbuff_arr[i] = dma_alloc_coherent(&instance->pdev->dev,
ioc->sgl[i].iov_len,
- &buf_handle);
+ &buf_handle, GFP_KERNEL);
if (!kbuff_arr[i]) {
printk(KERN_DEBUG "megasas: Failed to alloc "
"kernel SGL buffer for IOCTL \n");
}
if (ioc->sense_len) {
- sense = pci_alloc_consistent(instance->pdev, ioc->sense_len,
- &sense_handle);
+ sense = dma_alloc_coherent(&instance->pdev->dev, ioc->sense_len,
+ &sense_handle, GFP_KERNEL);
if (!sense) {
error = -ENOMEM;
goto out;
*/
if (ioc->sense_len) {
/*
- * sense_ptr points to the location that has the user
+ * sense_buff points to the location that has the user
* sense buffer address
*/
- sense_ptr = (u32 *) ((unsigned long)ioc->frame.raw +
- ioc->sense_off);
+ sense_buff = (unsigned long *) ((unsigned long)ioc->frame.raw +
+ ioc->sense_off);
- if (copy_to_user((void __user *)((unsigned long)(*sense_ptr)),
- sense, ioc->sense_len)) {
+ if (copy_to_user((void __user *)(unsigned long)(*sense_buff),
+ sense, ioc->sense_len)) {
+ printk(KERN_ERR "megasas: Failed to copy out to user "
+ "sense data\n");
error = -EFAULT;
goto out;
}
out:
if (sense) {
- pci_free_consistent(instance->pdev, ioc->sense_len,
+ dma_free_coherent(&instance->pdev->dev, ioc->sense_len,
sense, sense_handle);
}
for (i = 0; i < ioc->sge_count && kbuff_arr[i]; i++) {
- pci_free_consistent(instance->pdev,
+ dma_free_coherent(&instance->pdev->dev,
kern_sge32[i].length,
kbuff_arr[i], kern_sge32[i].phys_addr);
}
if (!instance)
return -ENODEV;
- down(&instance->aen_mutex);
+ mutex_lock(&instance->aen_mutex);
error = megasas_register_aen(instance, aen.seq_num,
aen.class_locale_word);
- up(&instance->aen_mutex);
+ mutex_unlock(&instance->aen_mutex);
return error;
}
int i;
int error = 0;
- clear_user(ioc, sizeof(*ioc));
+ if (clear_user(ioc, sizeof(*ioc)))
+ return -EFAULT;
if (copy_in_user(&ioc->host_no, &cioc->host_no, sizeof(u16)) ||
copy_in_user(&ioc->sgl_off, &cioc->sgl_off, sizeof(u32)) ||
/*
* File operations structure for management interface
*/
-static struct file_operations megasas_mgmt_fops = {
+static const struct file_operations megasas_mgmt_fops = {
.owner = THIS_MODULE,
.open = megasas_mgmt_open,
.release = megasas_mgmt_release,
.id_table = megasas_pci_table,
.probe = megasas_probe_one,
.remove = __devexit_p(megasas_detach_one),
+ .suspend = megasas_suspend,
+ .resume = megasas_resume,
.shutdown = megasas_shutdown,
};
static DRIVER_ATTR(release_date, S_IRUGO, megasas_sysfs_show_release_date,
NULL);
+static ssize_t
+megasas_sysfs_show_dbg_lvl(struct device_driver *dd, char *buf)
+{
+ return sprintf(buf,"%u",megasas_dbg_lvl);
+}
+
+static ssize_t
+megasas_sysfs_set_dbg_lvl(struct device_driver *dd, const char *buf, size_t count)
+{
+ int retval = count;
+ if(sscanf(buf,"%u",&megasas_dbg_lvl)<1){
+ printk(KERN_ERR "megasas: could not set dbg_lvl\n");
+ retval = -EINVAL;
+ }
+ return retval;
+}
+
+static DRIVER_ATTR(dbg_lvl, S_IRUGO|S_IWUGO, megasas_sysfs_show_dbg_lvl,
+ megasas_sysfs_set_dbg_lvl);
+
/**
* megasas_init - Driver load entry point
*/
/*
* Register ourselves as PCI hotplug module
*/
- rval = pci_module_init(&megasas_pci_driver);
+ rval = pci_register_driver(&megasas_pci_driver);
if (rval) {
printk(KERN_DEBUG "megasas: PCI hotplug regisration failed \n");
- unregister_chrdev(megasas_mgmt_majorno, "megaraid_sas_ioctl");
- }
-
- driver_create_file(&megasas_pci_driver.driver, &driver_attr_version);
- driver_create_file(&megasas_pci_driver.driver,
- &driver_attr_release_date);
+ goto err_pcidrv;
+ }
+
+ rval = driver_create_file(&megasas_pci_driver.driver,
+ &driver_attr_version);
+ if (rval)
+ goto err_dcf_attr_ver;
+ rval = driver_create_file(&megasas_pci_driver.driver,
+ &driver_attr_release_date);
+ if (rval)
+ goto err_dcf_rel_date;
+ rval = driver_create_file(&megasas_pci_driver.driver,
+ &driver_attr_dbg_lvl);
+ if (rval)
+ goto err_dcf_dbg_lvl;
return rval;
+err_dcf_dbg_lvl:
+ driver_remove_file(&megasas_pci_driver.driver,
+ &driver_attr_release_date);
+err_dcf_rel_date:
+ driver_remove_file(&megasas_pci_driver.driver, &driver_attr_version);
+err_dcf_attr_ver:
+ pci_unregister_driver(&megasas_pci_driver);
+err_pcidrv:
+ unregister_chrdev(megasas_mgmt_majorno, "megaraid_sas_ioctl");
+ return rval;
}
/**
*/
static void __exit megasas_exit(void)
{
- driver_remove_file(&megasas_pci_driver.driver, &driver_attr_version);
+ driver_remove_file(&megasas_pci_driver.driver,
+ &driver_attr_dbg_lvl);
driver_remove_file(&megasas_pci_driver.driver,
&driver_attr_release_date);
+ driver_remove_file(&megasas_pci_driver.driver, &driver_attr_version);
pci_unregister_driver(&megasas_pci_driver);
unregister_chrdev(megasas_mgmt_majorno, "megaraid_sas_ioctl");