/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
- * Enterprise Fibre Channel Host Bus Adapters. *
- * Refer to the README file included with this package for *
- * driver version and adapter support. *
- * Copyright (C) 2004 Emulex Corporation. *
+ * Fibre Channel Host Bus Adapters. *
+ * Copyright (C) 2004-2008 Emulex. All rights reserved. *
+ * EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
+ * Portions Copyright (C) 2004-2005 Christoph Hellwig *
* *
* This program is free software; you can redistribute it and/or *
- * modify it under the terms of the GNU General Public License *
- * as published by the Free Software Foundation; either version 2 *
- * of the License, or (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details, a copy of which *
- * can be found in the file COPYING included with this package. *
+ * modify it under the terms of version 2 of the GNU General *
+ * Public License as published by the Free Software Foundation. *
+ * This program is distributed in the hope that it will be useful. *
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
+ * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
+ * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
+ * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
+ * TO BE LEGALLY INVALID. See the GNU General Public License for *
+ * more details, a copy of which can be found in the file COPYING *
+ * included with this package. *
*******************************************************************/
-
-/*
- * $Id: lpfc_scsi.c 1.37 2005/04/13 14:27:09EDT sf_support Exp $
- */
-
#include <linux/pci.h>
#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <asm/unaligned.h>
#include <scsi/scsi.h>
#include <scsi/scsi_device.h>
+#include <scsi/scsi_eh.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_tcq.h>
#include <scsi/scsi_transport_fc.h>
#include "lpfc_version.h"
#include "lpfc_hw.h"
#include "lpfc_sli.h"
+#include "lpfc_nl.h"
#include "lpfc_disc.h"
#include "lpfc_scsi.h"
#include "lpfc.h"
#include "lpfc_logmsg.h"
#include "lpfc_crtn.h"
+#include "lpfc_vport.h"
#define LPFC_RESET_WAIT 2
#define LPFC_ABORT_WAIT 2
-static inline void lpfc_put_lun(struct fcp_cmnd *fcmd, unsigned int lun)
+int _dump_buf_done;
+
+static char *dif_op_str[] = {
+ "SCSI_PROT_NORMAL",
+ "SCSI_PROT_READ_INSERT",
+ "SCSI_PROT_WRITE_STRIP",
+ "SCSI_PROT_READ_STRIP",
+ "SCSI_PROT_WRITE_INSERT",
+ "SCSI_PROT_READ_PASS",
+ "SCSI_PROT_WRITE_PASS",
+ "SCSI_PROT_READ_CONVERT",
+ "SCSI_PROT_WRITE_CONVERT"
+};
+
+static void
+lpfc_debug_save_data(struct scsi_cmnd *cmnd)
+{
+ void *src, *dst;
+ struct scatterlist *sgde = scsi_sglist(cmnd);
+
+ if (!_dump_buf_data) {
+ printk(KERN_ERR "BLKGRD ERROR %s _dump_buf_data is NULL\n",
+ __func__);
+ return;
+ }
+
+
+ if (!sgde) {
+ printk(KERN_ERR "BLKGRD ERROR: data scatterlist is null\n");
+ return;
+ }
+
+ dst = (void *) _dump_buf_data;
+ while (sgde) {
+ src = sg_virt(sgde);
+ memcpy(dst, src, sgde->length);
+ dst += sgde->length;
+ sgde = sg_next(sgde);
+ }
+}
+
+static void
+lpfc_debug_save_dif(struct scsi_cmnd *cmnd)
{
- fcmd->fcpLunLsl = 0;
- fcmd->fcpLunMsl = swab16((uint16_t)lun);
+ void *src, *dst;
+ struct scatterlist *sgde = scsi_prot_sglist(cmnd);
+
+ if (!_dump_buf_dif) {
+ printk(KERN_ERR "BLKGRD ERROR %s _dump_buf_data is NULL\n",
+ __func__);
+ return;
+ }
+
+ if (!sgde) {
+ printk(KERN_ERR "BLKGRD ERROR: prot scatterlist is null\n");
+ return;
+ }
+
+ dst = _dump_buf_dif;
+ while (sgde) {
+ src = sg_virt(sgde);
+ memcpy(dst, src, sgde->length);
+ dst += sgde->length;
+ sgde = sg_next(sgde);
+ }
}
-/*
+/**
+ * lpfc_update_stats: Update statistical data for the command completion.
+ * @phba: Pointer to HBA object.
+ * @lpfc_cmd: lpfc scsi command object pointer.
+ *
+ * This function is called when there is a command completion and this
+ * function updates the statistical data for the command completion.
+ **/
+static void
+lpfc_update_stats(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
+{
+ struct lpfc_rport_data *rdata = lpfc_cmd->rdata;
+ struct lpfc_nodelist *pnode = rdata->pnode;
+ struct scsi_cmnd *cmd = lpfc_cmd->pCmd;
+ unsigned long flags;
+ struct Scsi_Host *shost = cmd->device->host;
+ struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+ unsigned long latency;
+ int i;
+
+ if (cmd->result)
+ return;
+
+ latency = jiffies_to_msecs((long)jiffies - (long)lpfc_cmd->start_time);
+
+ spin_lock_irqsave(shost->host_lock, flags);
+ if (!vport->stat_data_enabled ||
+ vport->stat_data_blocked ||
+ !pnode->lat_data ||
+ (phba->bucket_type == LPFC_NO_BUCKET)) {
+ spin_unlock_irqrestore(shost->host_lock, flags);
+ return;
+ }
+
+ if (phba->bucket_type == LPFC_LINEAR_BUCKET) {
+ i = (latency + phba->bucket_step - 1 - phba->bucket_base)/
+ phba->bucket_step;
+ /* check array subscript bounds */
+ if (i < 0)
+ i = 0;
+ else if (i >= LPFC_MAX_BUCKET_COUNT)
+ i = LPFC_MAX_BUCKET_COUNT - 1;
+ } else {
+ for (i = 0; i < LPFC_MAX_BUCKET_COUNT-1; i++)
+ if (latency <= (phba->bucket_base +
+ ((1<<i)*phba->bucket_step)))
+ break;
+ }
+
+ pnode->lat_data[i].cmd_count++;
+ spin_unlock_irqrestore(shost->host_lock, flags);
+}
+
+/**
+ * lpfc_send_sdev_queuedepth_change_event: Posts a queuedepth change
+ * event.
+ * @phba: Pointer to HBA context object.
+ * @vport: Pointer to vport object.
+ * @ndlp: Pointer to FC node associated with the target.
+ * @lun: Lun number of the scsi device.
+ * @old_val: Old value of the queue depth.
+ * @new_val: New value of the queue depth.
+ *
+ * This function sends an event to the mgmt application indicating
+ * there is a change in the scsi device queue depth.
+ **/
+static void
+lpfc_send_sdev_queuedepth_change_event(struct lpfc_hba *phba,
+ struct lpfc_vport *vport,
+ struct lpfc_nodelist *ndlp,
+ uint32_t lun,
+ uint32_t old_val,
+ uint32_t new_val)
+{
+ struct lpfc_fast_path_event *fast_path_evt;
+ unsigned long flags;
+
+ fast_path_evt = lpfc_alloc_fast_evt(phba);
+ if (!fast_path_evt)
+ return;
+
+ fast_path_evt->un.queue_depth_evt.scsi_event.event_type =
+ FC_REG_SCSI_EVENT;
+ fast_path_evt->un.queue_depth_evt.scsi_event.subcategory =
+ LPFC_EVENT_VARQUEDEPTH;
+
+ /* Report all luns with change in queue depth */
+ fast_path_evt->un.queue_depth_evt.scsi_event.lun = lun;
+ if (ndlp && NLP_CHK_NODE_ACT(ndlp)) {
+ memcpy(&fast_path_evt->un.queue_depth_evt.scsi_event.wwpn,
+ &ndlp->nlp_portname, sizeof(struct lpfc_name));
+ memcpy(&fast_path_evt->un.queue_depth_evt.scsi_event.wwnn,
+ &ndlp->nlp_nodename, sizeof(struct lpfc_name));
+ }
+
+ fast_path_evt->un.queue_depth_evt.oldval = old_val;
+ fast_path_evt->un.queue_depth_evt.newval = new_val;
+ fast_path_evt->vport = vport;
+
+ fast_path_evt->work_evt.evt = LPFC_EVT_FASTPATH_MGMT_EVT;
+ spin_lock_irqsave(&phba->hbalock, flags);
+ list_add_tail(&fast_path_evt->work_evt.evt_listp, &phba->work_list);
+ spin_unlock_irqrestore(&phba->hbalock, flags);
+ lpfc_worker_wake_up(phba);
+
+ return;
+}
+
+/**
+ * lpfc_rampdown_queue_depth: Post RAMP_DOWN_QUEUE event to worker thread.
+ * @phba: The Hba for which this call is being executed.
+ *
+ * This routine is called when there is resource error in driver or firmware.
+ * This routine posts WORKER_RAMP_DOWN_QUEUE event for @phba. This routine
+ * posts at most 1 event each second. This routine wakes up worker thread of
+ * @phba to process WORKER_RAM_DOWN_EVENT event.
+ *
+ * This routine should be called with no lock held.
+ **/
+void
+lpfc_rampdown_queue_depth(struct lpfc_hba *phba)
+{
+ unsigned long flags;
+ uint32_t evt_posted;
+
+ spin_lock_irqsave(&phba->hbalock, flags);
+ atomic_inc(&phba->num_rsrc_err);
+ phba->last_rsrc_error_time = jiffies;
+
+ if ((phba->last_ramp_down_time + QUEUE_RAMP_DOWN_INTERVAL) > jiffies) {
+ spin_unlock_irqrestore(&phba->hbalock, flags);
+ return;
+ }
+
+ phba->last_ramp_down_time = jiffies;
+
+ spin_unlock_irqrestore(&phba->hbalock, flags);
+
+ spin_lock_irqsave(&phba->pport->work_port_lock, flags);
+ evt_posted = phba->pport->work_port_events & WORKER_RAMP_DOWN_QUEUE;
+ if (!evt_posted)
+ phba->pport->work_port_events |= WORKER_RAMP_DOWN_QUEUE;
+ spin_unlock_irqrestore(&phba->pport->work_port_lock, flags);
+
+ if (!evt_posted)
+ lpfc_worker_wake_up(phba);
+ return;
+}
+
+/**
+ * lpfc_rampup_queue_depth: Post RAMP_UP_QUEUE event for worker thread.
+ * @phba: The Hba for which this call is being executed.
+ *
+ * This routine post WORKER_RAMP_UP_QUEUE event for @phba vport. This routine
+ * post at most 1 event every 5 minute after last_ramp_up_time or
+ * last_rsrc_error_time. This routine wakes up worker thread of @phba
+ * to process WORKER_RAM_DOWN_EVENT event.
+ *
+ * This routine should be called with no lock held.
+ **/
+static inline void
+lpfc_rampup_queue_depth(struct lpfc_vport *vport,
+ struct scsi_device *sdev)
+{
+ unsigned long flags;
+ struct lpfc_hba *phba = vport->phba;
+ uint32_t evt_posted;
+ atomic_inc(&phba->num_cmd_success);
+
+ if (vport->cfg_lun_queue_depth <= sdev->queue_depth)
+ return;
+ spin_lock_irqsave(&phba->hbalock, flags);
+ if (((phba->last_ramp_up_time + QUEUE_RAMP_UP_INTERVAL) > jiffies) ||
+ ((phba->last_rsrc_error_time + QUEUE_RAMP_UP_INTERVAL ) > jiffies)) {
+ spin_unlock_irqrestore(&phba->hbalock, flags);
+ return;
+ }
+ phba->last_ramp_up_time = jiffies;
+ spin_unlock_irqrestore(&phba->hbalock, flags);
+
+ spin_lock_irqsave(&phba->pport->work_port_lock, flags);
+ evt_posted = phba->pport->work_port_events & WORKER_RAMP_UP_QUEUE;
+ if (!evt_posted)
+ phba->pport->work_port_events |= WORKER_RAMP_UP_QUEUE;
+ spin_unlock_irqrestore(&phba->pport->work_port_lock, flags);
+
+ if (!evt_posted)
+ lpfc_worker_wake_up(phba);
+ return;
+}
+
+/**
+ * lpfc_ramp_down_queue_handler: WORKER_RAMP_DOWN_QUEUE event handler.
+ * @phba: The Hba for which this call is being executed.
+ *
+ * This routine is called to process WORKER_RAMP_DOWN_QUEUE event for worker
+ * thread.This routine reduces queue depth for all scsi device on each vport
+ * associated with @phba.
+ **/
+void
+lpfc_ramp_down_queue_handler(struct lpfc_hba *phba)
+{
+ struct lpfc_vport **vports;
+ struct Scsi_Host *shost;
+ struct scsi_device *sdev;
+ unsigned long new_queue_depth, old_queue_depth;
+ unsigned long num_rsrc_err, num_cmd_success;
+ int i;
+ struct lpfc_rport_data *rdata;
+
+ num_rsrc_err = atomic_read(&phba->num_rsrc_err);
+ num_cmd_success = atomic_read(&phba->num_cmd_success);
+
+ vports = lpfc_create_vport_work_array(phba);
+ if (vports != NULL)
+ for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+ shost = lpfc_shost_from_vport(vports[i]);
+ shost_for_each_device(sdev, shost) {
+ new_queue_depth =
+ sdev->queue_depth * num_rsrc_err /
+ (num_rsrc_err + num_cmd_success);
+ if (!new_queue_depth)
+ new_queue_depth = sdev->queue_depth - 1;
+ else
+ new_queue_depth = sdev->queue_depth -
+ new_queue_depth;
+ old_queue_depth = sdev->queue_depth;
+ if (sdev->ordered_tags)
+ scsi_adjust_queue_depth(sdev,
+ MSG_ORDERED_TAG,
+ new_queue_depth);
+ else
+ scsi_adjust_queue_depth(sdev,
+ MSG_SIMPLE_TAG,
+ new_queue_depth);
+ rdata = sdev->hostdata;
+ if (rdata)
+ lpfc_send_sdev_queuedepth_change_event(
+ phba, vports[i],
+ rdata->pnode,
+ sdev->lun, old_queue_depth,
+ new_queue_depth);
+ }
+ }
+ lpfc_destroy_vport_work_array(phba, vports);
+ atomic_set(&phba->num_rsrc_err, 0);
+ atomic_set(&phba->num_cmd_success, 0);
+}
+
+/**
+ * lpfc_ramp_up_queue_handler: WORKER_RAMP_UP_QUEUE event handler.
+ * @phba: The Hba for which this call is being executed.
+ *
+ * This routine is called to process WORKER_RAMP_UP_QUEUE event for worker
+ * thread.This routine increases queue depth for all scsi device on each vport
+ * associated with @phba by 1. This routine also sets @phba num_rsrc_err and
+ * num_cmd_success to zero.
+ **/
+void
+lpfc_ramp_up_queue_handler(struct lpfc_hba *phba)
+{
+ struct lpfc_vport **vports;
+ struct Scsi_Host *shost;
+ struct scsi_device *sdev;
+ int i;
+ struct lpfc_rport_data *rdata;
+
+ vports = lpfc_create_vport_work_array(phba);
+ if (vports != NULL)
+ for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+ shost = lpfc_shost_from_vport(vports[i]);
+ shost_for_each_device(sdev, shost) {
+ if (vports[i]->cfg_lun_queue_depth <=
+ sdev->queue_depth)
+ continue;
+ if (sdev->ordered_tags)
+ scsi_adjust_queue_depth(sdev,
+ MSG_ORDERED_TAG,
+ sdev->queue_depth+1);
+ else
+ scsi_adjust_queue_depth(sdev,
+ MSG_SIMPLE_TAG,
+ sdev->queue_depth+1);
+ rdata = sdev->hostdata;
+ if (rdata)
+ lpfc_send_sdev_queuedepth_change_event(
+ phba, vports[i],
+ rdata->pnode,
+ sdev->lun,
+ sdev->queue_depth - 1,
+ sdev->queue_depth);
+ }
+ }
+ lpfc_destroy_vport_work_array(phba, vports);
+ atomic_set(&phba->num_rsrc_err, 0);
+ atomic_set(&phba->num_cmd_success, 0);
+}
+
+/**
+ * lpfc_scsi_dev_block: set all scsi hosts to block state.
+ * @phba: Pointer to HBA context object.
+ *
+ * This function walks vport list and set each SCSI host to block state
+ * by invoking fc_remote_port_delete() routine. This function is invoked
+ * with EEH when device's PCI slot has been permanently disabled.
+ **/
+void
+lpfc_scsi_dev_block(struct lpfc_hba *phba)
+{
+ struct lpfc_vport **vports;
+ struct Scsi_Host *shost;
+ struct scsi_device *sdev;
+ struct fc_rport *rport;
+ int i;
+
+ vports = lpfc_create_vport_work_array(phba);
+ if (vports != NULL)
+ for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+ shost = lpfc_shost_from_vport(vports[i]);
+ shost_for_each_device(sdev, shost) {
+ rport = starget_to_rport(scsi_target(sdev));
+ fc_remote_port_delete(rport);
+ }
+ }
+ lpfc_destroy_vport_work_array(phba, vports);
+}
+
+/**
+ * lpfc_new_scsi_buf: Scsi buffer allocator.
+ * @vport: The virtual port for which this call being executed.
+ *
* This routine allocates a scsi buffer, which contains all the necessary
* information needed to initiate a SCSI I/O. The non-DMAable buffer region
* contains information to build the IOCB. The DMAable region contains
- * memory for the FCP CMND, FCP RSP, and the inital BPL. In addition to
- * allocating memeory, the FCP CMND and FCP RSP BDEs are setup in the BPL
+ * memory for the FCP CMND, FCP RSP, and the initial BPL. In addition to
+ * allocating memory, the FCP CMND and FCP RSP BDEs are setup in the BPL
* and the BPL BDE is setup in the IOCB.
- */
+ *
+ * Return codes:
+ * NULL - Error
+ * Pointer to lpfc_scsi_buf data structure - Success
+ **/
static struct lpfc_scsi_buf *
-lpfc_get_scsi_buf(struct lpfc_hba * phba)
+lpfc_new_scsi_buf(struct lpfc_vport *vport)
{
+ struct lpfc_hba *phba = vport->phba;
struct lpfc_scsi_buf *psb;
struct ulp_bde64 *bpl;
IOCB_t *iocb;
- dma_addr_t pdma_phys;
+ dma_addr_t pdma_phys_fcp_cmd;
+ dma_addr_t pdma_phys_fcp_rsp;
+ dma_addr_t pdma_phys_bpl;
+ uint16_t iotag;
- psb = kmalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL);
+ psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL);
if (!psb)
return NULL;
- memset(psb, 0, sizeof (struct lpfc_scsi_buf));
- psb->scsi_hba = phba;
/*
* Get memory from the pci pool to map the virt space to pci bus space
/* Initialize virtual ptrs to dma_buf region. */
memset(psb->data, 0, phba->cfg_sg_dma_buf_size);
+ /* Allocate iotag for psb->cur_iocbq. */
+ iotag = lpfc_sli_next_iotag(phba, &psb->cur_iocbq);
+ if (iotag == 0) {
+ pci_pool_free(phba->lpfc_scsi_dma_buf_pool,
+ psb->data, psb->dma_handle);
+ kfree (psb);
+ return NULL;
+ }
+ psb->cur_iocbq.iocb_flag |= LPFC_IO_FCP;
+
psb->fcp_cmnd = psb->data;
psb->fcp_rsp = psb->data + sizeof(struct fcp_cmnd);
psb->fcp_bpl = psb->data + sizeof(struct fcp_cmnd) +
/* Initialize local short-hand pointers. */
bpl = psb->fcp_bpl;
- pdma_phys = psb->dma_handle;
+ pdma_phys_fcp_cmd = psb->dma_handle;
+ pdma_phys_fcp_rsp = psb->dma_handle + sizeof(struct fcp_cmnd);
+ pdma_phys_bpl = psb->dma_handle + sizeof(struct fcp_cmnd) +
+ sizeof(struct fcp_rsp);
/*
* The first two bdes are the FCP_CMD and FCP_RSP. The balance are sg
* list bdes. Initialize the first two and leave the rest for
* queuecommand.
*/
- bpl->addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys));
- bpl->addrLow = le32_to_cpu(putPaddrLow(pdma_phys));
- bpl->tus.f.bdeSize = sizeof (struct fcp_cmnd);
- bpl->tus.f.bdeFlags = BUFF_USE_CMND;
- bpl->tus.w = le32_to_cpu(bpl->tus.w);
- bpl++;
+ bpl[0].addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys_fcp_cmd));
+ bpl[0].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_cmd));
+ bpl[0].tus.f.bdeSize = sizeof(struct fcp_cmnd);
+ bpl[0].tus.f.bdeFlags = BUFF_TYPE_BDE_64;
+ bpl[0].tus.w = le32_to_cpu(bpl[0].tus.w);
/* Setup the physical region for the FCP RSP */
- pdma_phys += sizeof (struct fcp_cmnd);
- bpl->addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys));
- bpl->addrLow = le32_to_cpu(putPaddrLow(pdma_phys));
- bpl->tus.f.bdeSize = sizeof (struct fcp_rsp);
- bpl->tus.f.bdeFlags = (BUFF_USE_CMND | BUFF_USE_RCV);
- bpl->tus.w = le32_to_cpu(bpl->tus.w);
+ bpl[1].addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys_fcp_rsp));
+ bpl[1].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_rsp));
+ bpl[1].tus.f.bdeSize = sizeof(struct fcp_rsp);
+ bpl[1].tus.f.bdeFlags = BUFF_TYPE_BDE_64;
+ bpl[1].tus.w = le32_to_cpu(bpl[1].tus.w);
/*
* Since the IOCB for the FCP I/O is built into this lpfc_scsi_buf,
* initialize it with all known data now.
*/
- pdma_phys += (sizeof (struct fcp_rsp));
iocb = &psb->cur_iocbq.iocb;
iocb->un.fcpi64.bdl.ulpIoTag32 = 0;
- iocb->un.fcpi64.bdl.addrHigh = putPaddrHigh(pdma_phys);
- iocb->un.fcpi64.bdl.addrLow = putPaddrLow(pdma_phys);
- iocb->un.fcpi64.bdl.bdeSize = (2 * sizeof (struct ulp_bde64));
- iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BDL;
- iocb->ulpBdeCount = 1;
+ if ((phba->sli_rev == 3) &&
+ !(phba->sli3_options & LPFC_SLI3_BG_ENABLED)) {
+ /* fill in immediate fcp command BDE */
+ iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BDE_IMMED;
+ iocb->un.fcpi64.bdl.bdeSize = sizeof(struct fcp_cmnd);
+ iocb->un.fcpi64.bdl.addrLow = offsetof(IOCB_t,
+ unsli3.fcp_ext.icd);
+ iocb->un.fcpi64.bdl.addrHigh = 0;
+ iocb->ulpBdeCount = 0;
+ iocb->ulpLe = 0;
+ /* fill in responce BDE */
+ iocb->unsli3.fcp_ext.rbde.tus.f.bdeFlags = BUFF_TYPE_BDE_64;
+ iocb->unsli3.fcp_ext.rbde.tus.f.bdeSize =
+ sizeof(struct fcp_rsp);
+ iocb->unsli3.fcp_ext.rbde.addrLow =
+ putPaddrLow(pdma_phys_fcp_rsp);
+ iocb->unsli3.fcp_ext.rbde.addrHigh =
+ putPaddrHigh(pdma_phys_fcp_rsp);
+ } else {
+ iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BLP_64;
+ iocb->un.fcpi64.bdl.bdeSize = (2 * sizeof(struct ulp_bde64));
+ iocb->un.fcpi64.bdl.addrLow = putPaddrLow(pdma_phys_bpl);
+ iocb->un.fcpi64.bdl.addrHigh = putPaddrHigh(pdma_phys_bpl);
+ iocb->ulpBdeCount = 1;
+ iocb->ulpLe = 1;
+ }
iocb->ulpClass = CLASS3;
return psb;
}
-static void
-lpfc_free_scsi_buf(struct lpfc_scsi_buf * psb)
+/**
+ * lpfc_get_scsi_buf: Get a scsi buffer from lpfc_scsi_buf_list list of Hba.
+ * @phba: The Hba for which this call is being executed.
+ *
+ * This routine removes a scsi buffer from head of @phba lpfc_scsi_buf_list list
+ * and returns to caller.
+ *
+ * Return codes:
+ * NULL - Error
+ * Pointer to lpfc_scsi_buf - Success
+ **/
+static struct lpfc_scsi_buf*
+lpfc_get_scsi_buf(struct lpfc_hba * phba)
{
- struct lpfc_hba *phba = psb->scsi_hba;
+ struct lpfc_scsi_buf * lpfc_cmd = NULL;
+ struct list_head *scsi_buf_list = &phba->lpfc_scsi_buf_list;
+ unsigned long iflag = 0;
- /*
- * There are only two special cases to consider. (1) the scsi command
- * requested scatter-gather usage or (2) the scsi command allocated
- * a request buffer, but did not request use_sg. There is a third
- * case, but it does not require resource deallocation.
- */
- if ((psb->seg_cnt > 0) && (psb->pCmd->use_sg)) {
- dma_unmap_sg(&phba->pcidev->dev, psb->pCmd->request_buffer,
- psb->seg_cnt, psb->pCmd->sc_data_direction);
- } else {
- if ((psb->nonsg_phys) && (psb->pCmd->request_bufflen)) {
- dma_unmap_single(&phba->pcidev->dev, psb->nonsg_phys,
- psb->pCmd->request_bufflen,
- psb->pCmd->sc_data_direction);
- }
+ spin_lock_irqsave(&phba->scsi_buf_list_lock, iflag);
+ list_remove_head(scsi_buf_list, lpfc_cmd, struct lpfc_scsi_buf, list);
+ if (lpfc_cmd) {
+ lpfc_cmd->seg_cnt = 0;
+ lpfc_cmd->nonsg_phys = 0;
+ lpfc_cmd->prot_seg_cnt = 0;
}
+ spin_unlock_irqrestore(&phba->scsi_buf_list_lock, iflag);
+ return lpfc_cmd;
+}
+
+/**
+ * lpfc_release_scsi_buf: Return a scsi buffer back to hba lpfc_scsi_buf_list list.
+ * @phba: The Hba for which this call is being executed.
+ * @psb: The scsi buffer which is being released.
+ *
+ * This routine releases @psb scsi buffer by adding it to tail of @phba
+ * lpfc_scsi_buf_list list.
+ **/
+static void
+lpfc_release_scsi_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
+{
+ unsigned long iflag = 0;
+ spin_lock_irqsave(&phba->scsi_buf_list_lock, iflag);
+ psb->pCmd = NULL;
list_add_tail(&psb->list, &phba->lpfc_scsi_buf_list);
+ spin_unlock_irqrestore(&phba->scsi_buf_list_lock, iflag);
}
+/**
+ * lpfc_scsi_prep_dma_buf: Routine to do DMA mapping for scsi buffer.
+ * @phba: The Hba for which this call is being executed.
+ * @lpfc_cmd: The scsi buffer which is going to be mapped.
+ *
+ * This routine does the pci dma mapping for scatter-gather list of scsi cmnd
+ * field of @lpfc_cmd. This routine scans through sg elements and format the
+ * bdea. This routine also initializes all IOCB fields which are dependent on
+ * scsi command request buffer.
+ *
+ * Return codes:
+ * 1 - Error
+ * 0 - Success
+ **/
static int
-lpfc_scsi_prep_dma_buf(struct lpfc_hba * phba, struct lpfc_scsi_buf * lpfc_cmd)
+lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
{
struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
struct scatterlist *sgel = NULL;
struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd;
struct ulp_bde64 *bpl = lpfc_cmd->fcp_bpl;
IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
+ struct ulp_bde64 *data_bde = iocb_cmd->unsli3.fcp_ext.dbde;
dma_addr_t physaddr;
- uint32_t i, num_bde = 0;
- int datadir = scsi_cmnd->sc_data_direction;
- int dma_error;
+ uint32_t num_bde = 0;
+ int nseg, datadir = scsi_cmnd->sc_data_direction;
/*
* There are three possibilities here - use scatter-gather segment, use
* data bde entry.
*/
bpl += 2;
- if (scsi_cmnd->use_sg) {
+ if (scsi_sg_count(scsi_cmnd)) {
/*
* The driver stores the segment count returned from pci_map_sg
* because this a count of dma-mappings used to map the use_sg
* pages. They are not guaranteed to be the same for those
* architectures that implement an IOMMU.
*/
- sgel = (struct scatterlist *)scsi_cmnd->request_buffer;
- lpfc_cmd->seg_cnt = dma_map_sg(&phba->pcidev->dev, sgel,
- scsi_cmnd->use_sg, datadir);
- if (lpfc_cmd->seg_cnt == 0)
+
+ nseg = dma_map_sg(&phba->pcidev->dev, scsi_sglist(scsi_cmnd),
+ scsi_sg_count(scsi_cmnd), datadir);
+ if (unlikely(!nseg))
return 1;
+ lpfc_cmd->seg_cnt = nseg;
if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) {
printk(KERN_ERR "%s: Too many sg segments from "
- "dma_map_sg. Config %d, seg_cnt %d",
- __FUNCTION__, phba->cfg_sg_seg_cnt,
+ "dma_map_sg. Config %d, seg_cnt %d\n",
+ __func__, phba->cfg_sg_seg_cnt,
lpfc_cmd->seg_cnt);
- dma_unmap_sg(&phba->pcidev->dev, sgel,
- lpfc_cmd->seg_cnt, datadir);
+ scsi_dma_unmap(scsi_cmnd);
return 1;
}
* during probe that limits the number of sg elements in any
* single scsi command. Just run through the seg_cnt and format
* the bde's.
+ * When using SLI-3 the driver will try to fit all the BDEs into
+ * the IOCB. If it can't then the BDEs get added to a BPL as it
+ * does for SLI-2 mode.
*/
- for (i = 0; i < lpfc_cmd->seg_cnt; i++) {
+ scsi_for_each_sg(scsi_cmnd, sgel, nseg, num_bde) {
physaddr = sg_dma_address(sgel);
- bpl->addrLow = le32_to_cpu(putPaddrLow(physaddr));
- bpl->addrHigh = le32_to_cpu(putPaddrHigh(physaddr));
- bpl->tus.f.bdeSize = sg_dma_len(sgel);
- if (datadir == DMA_TO_DEVICE)
- bpl->tus.f.bdeFlags = 0;
- else
- bpl->tus.f.bdeFlags = BUFF_USE_RCV;
- bpl->tus.w = le32_to_cpu(bpl->tus.w);
- bpl++;
- sgel++;
- num_bde++;
+ if (phba->sli_rev == 3 &&
+ !(phba->sli3_options & LPFC_SLI3_BG_ENABLED) &&
+ nseg <= LPFC_EXT_DATA_BDE_COUNT) {
+ data_bde->tus.f.bdeFlags = BUFF_TYPE_BDE_64;
+ data_bde->tus.f.bdeSize = sg_dma_len(sgel);
+ data_bde->addrLow = putPaddrLow(physaddr);
+ data_bde->addrHigh = putPaddrHigh(physaddr);
+ data_bde++;
+ } else {
+ bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64;
+ bpl->tus.f.bdeSize = sg_dma_len(sgel);
+ bpl->tus.w = le32_to_cpu(bpl->tus.w);
+ bpl->addrLow =
+ le32_to_cpu(putPaddrLow(physaddr));
+ bpl->addrHigh =
+ le32_to_cpu(putPaddrHigh(physaddr));
+ bpl++;
+ }
}
- } else if (scsi_cmnd->request_buffer && scsi_cmnd->request_bufflen) {
- physaddr = dma_map_single(&phba->pcidev->dev,
- scsi_cmnd->request_buffer,
- scsi_cmnd->request_bufflen,
- datadir);
- dma_error = dma_mapping_error(physaddr);
- if (dma_error) {
- lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
- "%d:0718 Unable to dma_map_single "
- "request_buffer: x%x\n",
- phba->brd_no, dma_error);
- return 1;
+ }
+
+ /*
+ * Finish initializing those IOCB fields that are dependent on the
+ * scsi_cmnd request_buffer. Note that for SLI-2 the bdeSize is
+ * explicitly reinitialized and for SLI-3 the extended bde count is
+ * explicitly reinitialized since all iocb memory resources are reused.
+ */
+ if (phba->sli_rev == 3 &&
+ !(phba->sli3_options & LPFC_SLI3_BG_ENABLED)) {
+ if (num_bde > LPFC_EXT_DATA_BDE_COUNT) {
+ /*
+ * The extended IOCB format can only fit 3 BDE or a BPL.
+ * This I/O has more than 3 BDE so the 1st data bde will
+ * be a BPL that is filled in here.
+ */
+ physaddr = lpfc_cmd->dma_handle;
+ data_bde->tus.f.bdeFlags = BUFF_TYPE_BLP_64;
+ data_bde->tus.f.bdeSize = (num_bde *
+ sizeof(struct ulp_bde64));
+ physaddr += (sizeof(struct fcp_cmnd) +
+ sizeof(struct fcp_rsp) +
+ (2 * sizeof(struct ulp_bde64)));
+ data_bde->addrHigh = putPaddrHigh(physaddr);
+ data_bde->addrLow = putPaddrLow(physaddr);
+ /* ebde count includes the responce bde and data bpl */
+ iocb_cmd->unsli3.fcp_ext.ebde_count = 2;
+ } else {
+ /* ebde count includes the responce bde and data bdes */
+ iocb_cmd->unsli3.fcp_ext.ebde_count = (num_bde + 1);
+ }
+ } else {
+ iocb_cmd->un.fcpi64.bdl.bdeSize =
+ ((num_bde + 2) * sizeof(struct ulp_bde64));
+ }
+ fcp_cmnd->fcpDl = cpu_to_be32(scsi_bufflen(scsi_cmnd));
+
+ /*
+ * Due to difference in data length between DIF/non-DIF paths,
+ * we need to set word 4 of IOCB here
+ */
+ iocb_cmd->un.fcpi.fcpi_parm = le32_to_cpu(scsi_bufflen(scsi_cmnd));
+ return 0;
+}
+
+/*
+ * Given a scsi cmnd, determine the BlockGuard profile to be used
+ * with the cmd
+ */
+static int
+lpfc_sc_to_sli_prof(struct scsi_cmnd *sc)
+{
+ uint8_t guard_type = scsi_host_get_guard(sc->device->host);
+ uint8_t ret_prof = LPFC_PROF_INVALID;
+
+ if (guard_type == SHOST_DIX_GUARD_IP) {
+ switch (scsi_get_prot_op(sc)) {
+ case SCSI_PROT_READ_INSERT:
+ case SCSI_PROT_WRITE_STRIP:
+ ret_prof = LPFC_PROF_AST2;
+ break;
+
+ case SCSI_PROT_READ_STRIP:
+ case SCSI_PROT_WRITE_INSERT:
+ ret_prof = LPFC_PROF_A1;
+ break;
+
+ case SCSI_PROT_READ_CONVERT:
+ case SCSI_PROT_WRITE_CONVERT:
+ ret_prof = LPFC_PROF_AST1;
+ break;
+
+ case SCSI_PROT_READ_PASS:
+ case SCSI_PROT_WRITE_PASS:
+ case SCSI_PROT_NORMAL:
+ default:
+ printk(KERN_ERR "Bad op/guard:%d/%d combination\n",
+ scsi_get_prot_op(sc), guard_type);
+ break;
+
+ }
+ } else if (guard_type == SHOST_DIX_GUARD_CRC) {
+ switch (scsi_get_prot_op(sc)) {
+ case SCSI_PROT_READ_STRIP:
+ case SCSI_PROT_WRITE_INSERT:
+ ret_prof = LPFC_PROF_A1;
+ break;
+
+ case SCSI_PROT_READ_PASS:
+ case SCSI_PROT_WRITE_PASS:
+ ret_prof = LPFC_PROF_C1;
+ break;
+
+ case SCSI_PROT_READ_CONVERT:
+ case SCSI_PROT_WRITE_CONVERT:
+ case SCSI_PROT_READ_INSERT:
+ case SCSI_PROT_WRITE_STRIP:
+ case SCSI_PROT_NORMAL:
+ default:
+ printk(KERN_ERR "Bad op/guard:%d/%d combination\n",
+ scsi_get_prot_op(sc), guard_type);
+ break;
}
+ } else {
+ /* unsupported format */
+ BUG();
+ }
+
+ return ret_prof;
+}
+
+struct scsi_dif_tuple {
+ __be16 guard_tag; /* Checksum */
+ __be16 app_tag; /* Opaque storage */
+ __be32 ref_tag; /* Target LBA or indirect LBA */
+};
+
+static inline unsigned
+lpfc_cmd_blksize(struct scsi_cmnd *sc)
+{
+ return sc->device->sector_size;
+}
+
+/**
+ * lpfc_get_cmd_dif_parms - Extract DIF parameters from SCSI command
+ * @sc: in: SCSI command
+ * @apptagmask out: app tag mask
+ * @apptagval out: app tag value
+ * @reftag out: ref tag (reference tag)
+ *
+ * Description:
+ * Extract DIF paramters from the command if possible. Otherwise,
+ * use default paratmers.
+ *
+ **/
+static inline void
+lpfc_get_cmd_dif_parms(struct scsi_cmnd *sc, uint16_t *apptagmask,
+ uint16_t *apptagval, uint32_t *reftag)
+{
+ struct scsi_dif_tuple *spt;
+ unsigned char op = scsi_get_prot_op(sc);
+ unsigned int protcnt = scsi_prot_sg_count(sc);
+ static int cnt;
+
+ if (protcnt && (op == SCSI_PROT_WRITE_STRIP ||
+ op == SCSI_PROT_WRITE_PASS ||
+ op == SCSI_PROT_WRITE_CONVERT)) {
+
+ cnt++;
+ spt = page_address(sg_page(scsi_prot_sglist(sc))) +
+ scsi_prot_sglist(sc)[0].offset;
+ *apptagmask = 0;
+ *apptagval = 0;
+ *reftag = cpu_to_be32(spt->ref_tag);
+
+ } else {
+ /* SBC defines ref tag to be lower 32bits of LBA */
+ *reftag = (uint32_t) (0xffffffff & scsi_get_lba(sc));
+ *apptagmask = 0;
+ *apptagval = 0;
+ }
+}
+
+/*
+ * This function sets up buffer list for protection groups of
+ * type LPFC_PG_TYPE_NO_DIF
+ *
+ * This is usually used when the HBA is instructed to generate
+ * DIFs and insert them into data stream (or strip DIF from
+ * incoming data stream)
+ *
+ * The buffer list consists of just one protection group described
+ * below:
+ * +-------------------------+
+ * start of prot group --> | PDE_1 |
+ * +-------------------------+
+ * | Data BDE |
+ * +-------------------------+
+ * |more Data BDE's ... (opt)|
+ * +-------------------------+
+ *
+ * @sc: pointer to scsi command we're working on
+ * @bpl: pointer to buffer list for protection groups
+ * @datacnt: number of segments of data that have been dma mapped
+ *
+ * Note: Data s/g buffers have been dma mapped
+ */
+static int
+lpfc_bg_setup_bpl(struct lpfc_hba *phba, struct scsi_cmnd *sc,
+ struct ulp_bde64 *bpl, int datasegcnt)
+{
+ struct scatterlist *sgde = NULL; /* s/g data entry */
+ struct lpfc_pde *pde1 = NULL;
+ dma_addr_t physaddr;
+ int i = 0, num_bde = 0;
+ int datadir = sc->sc_data_direction;
+ int prof = LPFC_PROF_INVALID;
+ unsigned blksize;
+ uint32_t reftag;
+ uint16_t apptagmask, apptagval;
+
+ pde1 = (struct lpfc_pde *) bpl;
+ prof = lpfc_sc_to_sli_prof(sc);
+
+ if (prof == LPFC_PROF_INVALID)
+ goto out;
+
+ /* extract some info from the scsi command for PDE1*/
+ blksize = lpfc_cmd_blksize(sc);
+ lpfc_get_cmd_dif_parms(sc, &apptagmask, &apptagval, &reftag);
- lpfc_cmd->nonsg_phys = physaddr;
+ /* setup PDE1 with what we have */
+ lpfc_pde_set_bg_parms(pde1, LPFC_PDE1_DESCRIPTOR, prof, blksize,
+ BG_EC_STOP_ERR);
+ lpfc_pde_set_dif_parms(pde1, apptagmask, apptagval, reftag);
+
+ num_bde++;
+ bpl++;
+
+ /* assumption: caller has already run dma_map_sg on command data */
+ scsi_for_each_sg(sc, sgde, datasegcnt, i) {
+ physaddr = sg_dma_address(sgde);
bpl->addrLow = le32_to_cpu(putPaddrLow(physaddr));
bpl->addrHigh = le32_to_cpu(putPaddrHigh(physaddr));
- bpl->tus.f.bdeSize = scsi_cmnd->request_bufflen;
+ bpl->tus.f.bdeSize = sg_dma_len(sgde);
if (datadir == DMA_TO_DEVICE)
- bpl->tus.f.bdeFlags = 0;
+ bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64;
+ else
+ bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64I;
bpl->tus.w = le32_to_cpu(bpl->tus.w);
- num_bde = 1;
bpl++;
+ num_bde++;
+ }
+
+out:
+ return num_bde;
+}
+
+/*
+ * This function sets up buffer list for protection groups of
+ * type LPFC_PG_TYPE_DIF_BUF
+ *
+ * This is usually used when DIFs are in their own buffers,
+ * separate from the data. The HBA can then by instructed
+ * to place the DIFs in the outgoing stream. For read operations,
+ * The HBA could extract the DIFs and place it in DIF buffers.
+ *
+ * The buffer list for this type consists of one or more of the
+ * protection groups described below:
+ * +-------------------------+
+ * start of first prot group --> | PDE_1 |
+ * +-------------------------+
+ * | PDE_3 (Prot BDE) |
+ * +-------------------------+
+ * | Data BDE |
+ * +-------------------------+
+ * |more Data BDE's ... (opt)|
+ * +-------------------------+
+ * start of new prot group --> | PDE_1 |
+ * +-------------------------+
+ * | ... |
+ * +-------------------------+
+ *
+ * @sc: pointer to scsi command we're working on
+ * @bpl: pointer to buffer list for protection groups
+ * @datacnt: number of segments of data that have been dma mapped
+ * @protcnt: number of segment of protection data that have been dma mapped
+ *
+ * Note: It is assumed that both data and protection s/g buffers have been
+ * mapped for DMA
+ */
+static int
+lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
+ struct ulp_bde64 *bpl, int datacnt, int protcnt)
+{
+ struct scatterlist *sgde = NULL; /* s/g data entry */
+ struct scatterlist *sgpe = NULL; /* s/g prot entry */
+ struct lpfc_pde *pde1 = NULL;
+ struct ulp_bde64 *prot_bde = NULL;
+ dma_addr_t dataphysaddr, protphysaddr;
+ unsigned short curr_data = 0, curr_prot = 0;
+ unsigned int split_offset, protgroup_len;
+ unsigned int protgrp_blks, protgrp_bytes;
+ unsigned int remainder, subtotal;
+ int prof = LPFC_PROF_INVALID;
+ int datadir = sc->sc_data_direction;
+ unsigned char pgdone = 0, alldone = 0;
+ unsigned blksize;
+ uint32_t reftag;
+ uint16_t apptagmask, apptagval;
+ int num_bde = 0;
+
+ sgpe = scsi_prot_sglist(sc);
+ sgde = scsi_sglist(sc);
+
+ if (!sgpe || !sgde) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
+ "9020 Invalid s/g entry: data=0x%p prot=0x%p\n",
+ sgpe, sgde);
+ return 0;
+ }
+
+ prof = lpfc_sc_to_sli_prof(sc);
+ if (prof == LPFC_PROF_INVALID)
+ goto out;
+
+ /* extract some info from the scsi command for PDE1*/
+ blksize = lpfc_cmd_blksize(sc);
+ lpfc_get_cmd_dif_parms(sc, &apptagmask, &apptagval, &reftag);
+
+ split_offset = 0;
+ do {
+ /* setup the first PDE_1 */
+ pde1 = (struct lpfc_pde *) bpl;
+
+ lpfc_pde_set_bg_parms(pde1, LPFC_PDE1_DESCRIPTOR, prof, blksize,
+ BG_EC_STOP_ERR);
+ lpfc_pde_set_dif_parms(pde1, apptagmask, apptagval, reftag);
+
+ num_bde++;
+ bpl++;
+
+ /* setup the first BDE that points to protection buffer */
+ prot_bde = (struct ulp_bde64 *) bpl;
+ protphysaddr = sg_dma_address(sgpe);
+ prot_bde->addrLow = le32_to_cpu(putPaddrLow(protphysaddr));
+ prot_bde->addrHigh = le32_to_cpu(putPaddrHigh(protphysaddr));
+ protgroup_len = sg_dma_len(sgpe);
+
+
+ /* must be integer multiple of the DIF block length */
+ BUG_ON(protgroup_len % 8);
+
+ protgrp_blks = protgroup_len / 8;
+ protgrp_bytes = protgrp_blks * blksize;
+
+ prot_bde->tus.f.bdeSize = protgroup_len;
+ if (datadir == DMA_TO_DEVICE)
+ prot_bde->tus.f.bdeFlags = BUFF_TYPE_BDE_64;
+ else
+ prot_bde->tus.f.bdeFlags = BUFF_TYPE_BDE_64I;
+ prot_bde->tus.w = le32_to_cpu(bpl->tus.w);
+
+ curr_prot++;
+ num_bde++;
+
+ /* setup BDE's for data blocks associated with DIF data */
+ pgdone = 0;
+ subtotal = 0; /* total bytes processed for current prot grp */
+ while (!pgdone) {
+ if (!sgde) {
+ printk(KERN_ERR "%s Invalid data segment\n",
+ __func__);
+ return 0;
+ }
+ bpl++;
+ dataphysaddr = sg_dma_address(sgde) + split_offset;
+ bpl->addrLow = le32_to_cpu(putPaddrLow(dataphysaddr));
+ bpl->addrHigh = le32_to_cpu(putPaddrHigh(dataphysaddr));
+
+ remainder = sg_dma_len(sgde) - split_offset;
+
+ if ((subtotal + remainder) <= protgrp_bytes) {
+ /* we can use this whole buffer */
+ bpl->tus.f.bdeSize = remainder;
+ split_offset = 0;
+
+ if ((subtotal + remainder) == protgrp_bytes)
+ pgdone = 1;
+ } else {
+ /* must split this buffer with next prot grp */
+ bpl->tus.f.bdeSize = protgrp_bytes - subtotal;
+ split_offset += bpl->tus.f.bdeSize;
+ }
+
+ subtotal += bpl->tus.f.bdeSize;
+
+ if (datadir == DMA_TO_DEVICE)
+ bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64;
+ else
+ bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64I;
+ bpl->tus.w = le32_to_cpu(bpl->tus.w);
+
+ num_bde++;
+ curr_data++;
+
+ if (split_offset)
+ break;
+
+ /* Move to the next s/g segment if possible */
+ sgde = sg_next(sgde);
+ }
+
+ /* are we done ? */
+ if (curr_prot == protcnt) {
+ alldone = 1;
+ } else if (curr_prot < protcnt) {
+ /* advance to next prot buffer */
+ sgpe = sg_next(sgpe);
+ bpl++;
+
+ /* update the reference tag */
+ reftag += protgrp_blks;
+ } else {
+ /* if we're here, we have a bug */
+ printk(KERN_ERR "BLKGRD: bug in %s\n", __func__);
+ }
+
+ } while (!alldone);
+
+out:
+
+
+ return num_bde;
+}
+/*
+ * Given a SCSI command that supports DIF, determine composition of protection
+ * groups involved in setting up buffer lists
+ *
+ * Returns:
+ * for DIF (for both read and write)
+ * */
+static int
+lpfc_prot_group_type(struct lpfc_hba *phba, struct scsi_cmnd *sc)
+{
+ int ret = LPFC_PG_TYPE_INVALID;
+ unsigned char op = scsi_get_prot_op(sc);
+
+ switch (op) {
+ case SCSI_PROT_READ_STRIP:
+ case SCSI_PROT_WRITE_INSERT:
+ ret = LPFC_PG_TYPE_NO_DIF;
+ break;
+ case SCSI_PROT_READ_INSERT:
+ case SCSI_PROT_WRITE_STRIP:
+ case SCSI_PROT_READ_PASS:
+ case SCSI_PROT_WRITE_PASS:
+ case SCSI_PROT_WRITE_CONVERT:
+ case SCSI_PROT_READ_CONVERT:
+ ret = LPFC_PG_TYPE_DIF_BUF;
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
+ "9021 Unsupported protection op:%d\n", op);
+ break;
+ }
+
+ return ret;
+}
+
+/*
+ * This is the protection/DIF aware version of
+ * lpfc_scsi_prep_dma_buf(). It may be a good idea to combine the
+ * two functions eventually, but for now, it's here
+ */
+static int
+lpfc_bg_scsi_prep_dma_buf(struct lpfc_hba *phba,
+ struct lpfc_scsi_buf *lpfc_cmd)
+{
+ struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
+ struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd;
+ struct ulp_bde64 *bpl = lpfc_cmd->fcp_bpl;
+ IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
+ uint32_t num_bde = 0;
+ int datasegcnt, protsegcnt, datadir = scsi_cmnd->sc_data_direction;
+ int prot_group_type = 0;
+ int diflen, fcpdl;
+ unsigned blksize;
+
+ /*
+ * Start the lpfc command prep by bumping the bpl beyond fcp_cmnd
+ * fcp_rsp regions to the first data bde entry
+ */
+ bpl += 2;
+ if (scsi_sg_count(scsi_cmnd)) {
+ /*
+ * The driver stores the segment count returned from pci_map_sg
+ * because this a count of dma-mappings used to map the use_sg
+ * pages. They are not guaranteed to be the same for those
+ * architectures that implement an IOMMU.
+ */
+ datasegcnt = dma_map_sg(&phba->pcidev->dev,
+ scsi_sglist(scsi_cmnd),
+ scsi_sg_count(scsi_cmnd), datadir);
+ if (unlikely(!datasegcnt))
+ return 1;
+
+ lpfc_cmd->seg_cnt = datasegcnt;
+ if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) {
+ printk(KERN_ERR "%s: Too many sg segments from "
+ "dma_map_sg. Config %d, seg_cnt %d\n",
+ __func__, phba->cfg_sg_seg_cnt,
+ lpfc_cmd->seg_cnt);
+ scsi_dma_unmap(scsi_cmnd);
+ return 1;
+ }
+
+ prot_group_type = lpfc_prot_group_type(phba, scsi_cmnd);
+
+ switch (prot_group_type) {
+ case LPFC_PG_TYPE_NO_DIF:
+ num_bde = lpfc_bg_setup_bpl(phba, scsi_cmnd, bpl,
+ datasegcnt);
+ /* we shoud have 2 or more entries in buffer list */
+ if (num_bde < 2)
+ goto err;
+ break;
+ case LPFC_PG_TYPE_DIF_BUF:{
+ /*
+ * This type indicates that protection buffers are
+ * passed to the driver, so that needs to be prepared
+ * for DMA
+ */
+ protsegcnt = dma_map_sg(&phba->pcidev->dev,
+ scsi_prot_sglist(scsi_cmnd),
+ scsi_prot_sg_count(scsi_cmnd), datadir);
+ if (unlikely(!protsegcnt)) {
+ scsi_dma_unmap(scsi_cmnd);
+ return 1;
+ }
+
+ lpfc_cmd->prot_seg_cnt = protsegcnt;
+ if (lpfc_cmd->prot_seg_cnt
+ > phba->cfg_prot_sg_seg_cnt) {
+ printk(KERN_ERR "%s: Too many prot sg segments "
+ "from dma_map_sg. Config %d,"
+ "prot_seg_cnt %d\n", __func__,
+ phba->cfg_prot_sg_seg_cnt,
+ lpfc_cmd->prot_seg_cnt);
+ dma_unmap_sg(&phba->pcidev->dev,
+ scsi_prot_sglist(scsi_cmnd),
+ scsi_prot_sg_count(scsi_cmnd),
+ datadir);
+ scsi_dma_unmap(scsi_cmnd);
+ return 1;
+ }
+
+ num_bde = lpfc_bg_setup_bpl_prot(phba, scsi_cmnd, bpl,
+ datasegcnt, protsegcnt);
+ /* we shoud have 3 or more entries in buffer list */
+ if (num_bde < 3)
+ goto err;
+ break;
+ }
+ case LPFC_PG_TYPE_INVALID:
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
+ "9022 Unexpected protection group %i\n",
+ prot_group_type);
+ return 1;
+ }
}
/*
* Finish initializing those IOCB fields that are dependent on the
- * scsi_cmnd request_buffer
+ * scsi_cmnd request_buffer. Note that the bdeSize is explicitly
+ * reinitialized since all iocb memory resources are used many times
+ * for transmit, receive, and continuation bpl's.
*/
- iocb_cmd->un.fcpi64.bdl.bdeSize +=
- (num_bde * sizeof (struct ulp_bde64));
+ iocb_cmd->un.fcpi64.bdl.bdeSize = (2 * sizeof(struct ulp_bde64));
+ iocb_cmd->un.fcpi64.bdl.bdeSize += (num_bde * sizeof(struct ulp_bde64));
iocb_cmd->ulpBdeCount = 1;
iocb_cmd->ulpLe = 1;
- fcp_cmnd->fcpDl = be32_to_cpu(scsi_cmnd->request_bufflen);
+
+ fcpdl = scsi_bufflen(scsi_cmnd);
+
+ if (scsi_get_prot_type(scsi_cmnd) == SCSI_PROT_DIF_TYPE1) {
+ /*
+ * We are in DIF Type 1 mode
+ * Every data block has a 8 byte DIF (trailer)
+ * attached to it. Must ajust FCP data length
+ */
+ blksize = lpfc_cmd_blksize(scsi_cmnd);
+ diflen = (fcpdl / blksize) * 8;
+ fcpdl += diflen;
+ }
+ fcp_cmnd->fcpDl = be32_to_cpu(fcpdl);
+
+ /*
+ * Due to difference in data length between DIF/non-DIF paths,
+ * we need to set word 4 of IOCB here
+ */
+ iocb_cmd->un.fcpi.fcpi_parm = fcpdl;
+
return 0;
+err:
+ lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
+ "9023 Could not setup all needed BDE's"
+ "prot_group_type=%d, num_bde=%d\n",
+ prot_group_type, num_bde);
+ return 1;
}
+/*
+ * This function checks for BlockGuard errors detected by
+ * the HBA. In case of errors, the ASC/ASCQ fields in the
+ * sense buffer will be set accordingly, paired with
+ * ILLEGAL_REQUEST to signal to the kernel that the HBA
+ * detected corruption.
+ *
+ * Returns:
+ * 0 - No error found
+ * 1 - BlockGuard error found
+ * -1 - Internal error (bad profile, ...etc)
+ */
+static int
+lpfc_parse_bg_err(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd,
+ struct lpfc_iocbq *pIocbOut)
+{
+ struct scsi_cmnd *cmd = lpfc_cmd->pCmd;
+ struct sli3_bg_fields *bgf = &pIocbOut->iocb.unsli3.sli3_bg;
+ int ret = 0;
+ uint32_t bghm = bgf->bghm;
+ uint32_t bgstat = bgf->bgstat;
+ uint64_t failing_sector = 0;
+
+ printk(KERN_ERR "BG ERROR in cmd 0x%x lba 0x%llx blk cnt 0x%lx "
+ "bgstat=0x%x bghm=0x%x\n",
+ cmd->cmnd[0], (unsigned long long)scsi_get_lba(cmd),
+ cmd->request->nr_sectors, bgstat, bghm);
+
+ spin_lock(&_dump_buf_lock);
+ if (!_dump_buf_done) {
+ printk(KERN_ERR "Saving Data for %u blocks to debugfs\n",
+ (cmd->cmnd[7] << 8 | cmd->cmnd[8]));
+ lpfc_debug_save_data(cmd);
+
+ /* If we have a prot sgl, save the DIF buffer */
+ if (lpfc_prot_group_type(phba, cmd) ==
+ LPFC_PG_TYPE_DIF_BUF) {
+ printk(KERN_ERR "Saving DIF for %u blocks to debugfs\n",
+ (cmd->cmnd[7] << 8 | cmd->cmnd[8]));
+ lpfc_debug_save_dif(cmd);
+ }
+
+ _dump_buf_done = 1;
+ }
+ spin_unlock(&_dump_buf_lock);
+
+ if (lpfc_bgs_get_invalid_prof(bgstat)) {
+ cmd->result = ScsiResult(DID_ERROR, 0);
+ printk(KERN_ERR "Invalid BlockGuard profile. bgstat:0x%x\n",
+ bgstat);
+ ret = (-1);
+ goto out;
+ }
+
+ if (lpfc_bgs_get_uninit_dif_block(bgstat)) {
+ cmd->result = ScsiResult(DID_ERROR, 0);
+ printk(KERN_ERR "Invalid BlockGuard DIF Block. bgstat:0x%x\n",
+ bgstat);
+ ret = (-1);
+ goto out;
+ }
+
+ if (lpfc_bgs_get_guard_err(bgstat)) {
+ ret = 1;
+
+ scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST,
+ 0x10, 0x1);
+ cmd->result = DRIVER_SENSE << 24
+ | ScsiResult(DID_ABORT, SAM_STAT_CHECK_CONDITION);
+ phba->bg_guard_err_cnt++;
+ printk(KERN_ERR "BLKGRD: guard_tag error\n");
+ }
+
+ if (lpfc_bgs_get_reftag_err(bgstat)) {
+ ret = 1;
+
+ scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST,
+ 0x10, 0x3);
+ cmd->result = DRIVER_SENSE << 24
+ | ScsiResult(DID_ABORT, SAM_STAT_CHECK_CONDITION);
+
+ phba->bg_reftag_err_cnt++;
+ printk(KERN_ERR "BLKGRD: ref_tag error\n");
+ }
+
+ if (lpfc_bgs_get_apptag_err(bgstat)) {
+ ret = 1;
+
+ scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST,
+ 0x10, 0x2);
+ cmd->result = DRIVER_SENSE << 24
+ | ScsiResult(DID_ABORT, SAM_STAT_CHECK_CONDITION);
+
+ phba->bg_apptag_err_cnt++;
+ printk(KERN_ERR "BLKGRD: app_tag error\n");
+ }
+
+ if (lpfc_bgs_get_hi_water_mark_present(bgstat)) {
+ /*
+ * setup sense data descriptor 0 per SPC-4 as an information
+ * field, and put the failing LBA in it
+ */
+ cmd->sense_buffer[8] = 0; /* Information */
+ cmd->sense_buffer[9] = 0xa; /* Add. length */
+ bghm /= cmd->device->sector_size;
+
+ failing_sector = scsi_get_lba(cmd);
+ failing_sector += bghm;
+
+ put_unaligned_be64(failing_sector, &cmd->sense_buffer[10]);
+ }
+
+ if (!ret) {
+ /* No error was reported - problem in FW? */
+ cmd->result = ScsiResult(DID_ERROR, 0);
+ printk(KERN_ERR "BLKGRD: no errors reported!\n");
+ }
+
+out:
+ return ret;
+}
+
+/**
+ * lpfc_send_scsi_error_event: Posts an event when there is SCSI error.
+ * @phba: Pointer to hba context object.
+ * @vport: Pointer to vport object.
+ * @lpfc_cmd: Pointer to lpfc scsi command which reported the error.
+ * @rsp_iocb: Pointer to response iocb object which reported error.
+ *
+ * This function posts an event when there is a SCSI command reporting
+ * error from the scsi device.
+ **/
static void
-lpfc_handle_fcp_err(struct lpfc_scsi_buf *lpfc_cmd)
+lpfc_send_scsi_error_event(struct lpfc_hba *phba, struct lpfc_vport *vport,
+ struct lpfc_scsi_buf *lpfc_cmd, struct lpfc_iocbq *rsp_iocb) {
+ struct scsi_cmnd *cmnd = lpfc_cmd->pCmd;
+ struct fcp_rsp *fcprsp = lpfc_cmd->fcp_rsp;
+ uint32_t resp_info = fcprsp->rspStatus2;
+ uint32_t scsi_status = fcprsp->rspStatus3;
+ uint32_t fcpi_parm = rsp_iocb->iocb.un.fcpi.fcpi_parm;
+ struct lpfc_fast_path_event *fast_path_evt = NULL;
+ struct lpfc_nodelist *pnode = lpfc_cmd->rdata->pnode;
+ unsigned long flags;
+
+ /* If there is queuefull or busy condition send a scsi event */
+ if ((cmnd->result == SAM_STAT_TASK_SET_FULL) ||
+ (cmnd->result == SAM_STAT_BUSY)) {
+ fast_path_evt = lpfc_alloc_fast_evt(phba);
+ if (!fast_path_evt)
+ return;
+ fast_path_evt->un.scsi_evt.event_type =
+ FC_REG_SCSI_EVENT;
+ fast_path_evt->un.scsi_evt.subcategory =
+ (cmnd->result == SAM_STAT_TASK_SET_FULL) ?
+ LPFC_EVENT_QFULL : LPFC_EVENT_DEVBSY;
+ fast_path_evt->un.scsi_evt.lun = cmnd->device->lun;
+ memcpy(&fast_path_evt->un.scsi_evt.wwpn,
+ &pnode->nlp_portname, sizeof(struct lpfc_name));
+ memcpy(&fast_path_evt->un.scsi_evt.wwnn,
+ &pnode->nlp_nodename, sizeof(struct lpfc_name));
+ } else if ((resp_info & SNS_LEN_VALID) && fcprsp->rspSnsLen &&
+ ((cmnd->cmnd[0] == READ_10) || (cmnd->cmnd[0] == WRITE_10))) {
+ fast_path_evt = lpfc_alloc_fast_evt(phba);
+ if (!fast_path_evt)
+ return;
+ fast_path_evt->un.check_cond_evt.scsi_event.event_type =
+ FC_REG_SCSI_EVENT;
+ fast_path_evt->un.check_cond_evt.scsi_event.subcategory =
+ LPFC_EVENT_CHECK_COND;
+ fast_path_evt->un.check_cond_evt.scsi_event.lun =
+ cmnd->device->lun;
+ memcpy(&fast_path_evt->un.check_cond_evt.scsi_event.wwpn,
+ &pnode->nlp_portname, sizeof(struct lpfc_name));
+ memcpy(&fast_path_evt->un.check_cond_evt.scsi_event.wwnn,
+ &pnode->nlp_nodename, sizeof(struct lpfc_name));
+ fast_path_evt->un.check_cond_evt.sense_key =
+ cmnd->sense_buffer[2] & 0xf;
+ fast_path_evt->un.check_cond_evt.asc = cmnd->sense_buffer[12];
+ fast_path_evt->un.check_cond_evt.ascq = cmnd->sense_buffer[13];
+ } else if ((cmnd->sc_data_direction == DMA_FROM_DEVICE) &&
+ fcpi_parm &&
+ ((be32_to_cpu(fcprsp->rspResId) != fcpi_parm) ||
+ ((scsi_status == SAM_STAT_GOOD) &&
+ !(resp_info & (RESID_UNDER | RESID_OVER))))) {
+ /*
+ * If status is good or resid does not match with fcp_param and
+ * there is valid fcpi_parm, then there is a read_check error
+ */
+ fast_path_evt = lpfc_alloc_fast_evt(phba);
+ if (!fast_path_evt)
+ return;
+ fast_path_evt->un.read_check_error.header.event_type =
+ FC_REG_FABRIC_EVENT;
+ fast_path_evt->un.read_check_error.header.subcategory =
+ LPFC_EVENT_FCPRDCHKERR;
+ memcpy(&fast_path_evt->un.read_check_error.header.wwpn,
+ &pnode->nlp_portname, sizeof(struct lpfc_name));
+ memcpy(&fast_path_evt->un.read_check_error.header.wwnn,
+ &pnode->nlp_nodename, sizeof(struct lpfc_name));
+ fast_path_evt->un.read_check_error.lun = cmnd->device->lun;
+ fast_path_evt->un.read_check_error.opcode = cmnd->cmnd[0];
+ fast_path_evt->un.read_check_error.fcpiparam =
+ fcpi_parm;
+ } else
+ return;
+
+ fast_path_evt->vport = vport;
+ spin_lock_irqsave(&phba->hbalock, flags);
+ list_add_tail(&fast_path_evt->work_evt.evt_listp, &phba->work_list);
+ spin_unlock_irqrestore(&phba->hbalock, flags);
+ lpfc_worker_wake_up(phba);
+ return;
+}
+
+/**
+ * lpfc_scsi_unprep_dma_buf: Routine to un-map DMA mapping of scatter gather.
+ * @phba: The Hba for which this call is being executed.
+ * @psb: The scsi buffer which is going to be un-mapped.
+ *
+ * This routine does DMA un-mapping of scatter gather list of scsi command
+ * field of @lpfc_cmd.
+ **/
+static void
+lpfc_scsi_unprep_dma_buf(struct lpfc_hba * phba, struct lpfc_scsi_buf * psb)
+{
+ /*
+ * There are only two special cases to consider. (1) the scsi command
+ * requested scatter-gather usage or (2) the scsi command allocated
+ * a request buffer, but did not request use_sg. There is a third
+ * case, but it does not require resource deallocation.
+ */
+ if (psb->seg_cnt > 0)
+ scsi_dma_unmap(psb->pCmd);
+ if (psb->prot_seg_cnt > 0)
+ dma_unmap_sg(&phba->pcidev->dev, scsi_prot_sglist(psb->pCmd),
+ scsi_prot_sg_count(psb->pCmd),
+ psb->pCmd->sc_data_direction);
+}
+
+/**
+ * lpfc_handler_fcp_err: FCP response handler.
+ * @vport: The virtual port for which this call is being executed.
+ * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
+ * @rsp_iocb: The response IOCB which contains FCP error.
+ *
+ * This routine is called to process response IOCB with status field
+ * IOSTAT_FCP_RSP_ERROR. This routine sets result field of scsi command
+ * based upon SCSI and FCP error.
+ **/
+static void
+lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
+ struct lpfc_iocbq *rsp_iocb)
{
struct scsi_cmnd *cmnd = lpfc_cmd->pCmd;
struct fcp_cmnd *fcpcmd = lpfc_cmd->fcp_cmnd;
struct fcp_rsp *fcprsp = lpfc_cmd->fcp_rsp;
- struct lpfc_hba *phba = lpfc_cmd->scsi_hba;
- uint32_t fcpi_parm = lpfc_cmd->cur_iocbq.iocb.un.fcpi.fcpi_parm;
+ uint32_t fcpi_parm = rsp_iocb->iocb.un.fcpi.fcpi_parm;
uint32_t resp_info = fcprsp->rspStatus2;
uint32_t scsi_status = fcprsp->rspStatus3;
+ uint32_t *lp;
uint32_t host_status = DID_OK;
uint32_t rsplen = 0;
+ uint32_t logit = LOG_FCP | LOG_FCP_ERROR;
+
/*
* If this is a task management command, there is no
goto out;
}
- lpfc_printf_log(phba, KERN_WARNING, LOG_FCP,
- "%d:0730 FCP command failed: RSP "
- "Data: x%x x%x x%x x%x x%x x%x\n",
- phba->brd_no, resp_info, scsi_status,
- be32_to_cpu(fcprsp->rspResId),
- be32_to_cpu(fcprsp->rspSnsLen),
- be32_to_cpu(fcprsp->rspRspLen),
- fcprsp->rspInfo3);
+ if ((resp_info & SNS_LEN_VALID) && fcprsp->rspSnsLen) {
+ uint32_t snslen = be32_to_cpu(fcprsp->rspSnsLen);
+ if (snslen > SCSI_SENSE_BUFFERSIZE)
+ snslen = SCSI_SENSE_BUFFERSIZE;
+
+ if (resp_info & RSP_LEN_VALID)
+ rsplen = be32_to_cpu(fcprsp->rspRspLen);
+ memcpy(cmnd->sense_buffer, &fcprsp->rspInfo0 + rsplen, snslen);
+ }
+ lp = (uint32_t *)cmnd->sense_buffer;
+
+ if (!scsi_status && (resp_info & RESID_UNDER))
+ logit = LOG_FCP;
+
+ lpfc_printf_vlog(vport, KERN_WARNING, logit,
+ "9024 FCP command x%x failed: x%x SNS x%x x%x "
+ "Data: x%x x%x x%x x%x x%x\n",
+ cmnd->cmnd[0], scsi_status,
+ be32_to_cpu(*lp), be32_to_cpu(*(lp + 3)), resp_info,
+ be32_to_cpu(fcprsp->rspResId),
+ be32_to_cpu(fcprsp->rspSnsLen),
+ be32_to_cpu(fcprsp->rspRspLen),
+ fcprsp->rspInfo3);
if (resp_info & RSP_LEN_VALID) {
rsplen = be32_to_cpu(fcprsp->rspRspLen);
}
}
- if ((resp_info & SNS_LEN_VALID) && fcprsp->rspSnsLen) {
- uint32_t snslen = be32_to_cpu(fcprsp->rspSnsLen);
- if (snslen > SCSI_SENSE_BUFFERSIZE)
- snslen = SCSI_SENSE_BUFFERSIZE;
-
- memcpy(cmnd->sense_buffer, &fcprsp->rspInfo0 + rsplen, snslen);
- }
-
- cmnd->resid = 0;
+ scsi_set_resid(cmnd, 0);
if (resp_info & RESID_UNDER) {
- cmnd->resid = be32_to_cpu(fcprsp->rspResId);
+ scsi_set_resid(cmnd, be32_to_cpu(fcprsp->rspResId));
- lpfc_printf_log(phba, KERN_INFO, LOG_FCP,
- "%d:0716 FCP Read Underrun, expected %d, "
- "residual %d Data: x%x x%x x%x\n", phba->brd_no,
- be32_to_cpu(fcpcmd->fcpDl), cmnd->resid,
- fcpi_parm, cmnd->cmnd[0], cmnd->underflow);
+ lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
+ "9025 FCP Read Underrun, expected %d, "
+ "residual %d Data: x%x x%x x%x\n",
+ be32_to_cpu(fcpcmd->fcpDl),
+ scsi_get_resid(cmnd), fcpi_parm, cmnd->cmnd[0],
+ cmnd->underflow);
/*
+ * If there is an under run check if under run reported by
+ * storage array is same as the under run reported by HBA.
+ * If this is not same, there is a dropped frame.
+ */
+ if ((cmnd->sc_data_direction == DMA_FROM_DEVICE) &&
+ fcpi_parm &&
+ (scsi_get_resid(cmnd) != fcpi_parm)) {
+ lpfc_printf_vlog(vport, KERN_WARNING,
+ LOG_FCP | LOG_FCP_ERROR,
+ "9026 FCP Read Check Error "
+ "and Underrun Data: x%x x%x x%x x%x\n",
+ be32_to_cpu(fcpcmd->fcpDl),
+ scsi_get_resid(cmnd), fcpi_parm,
+ cmnd->cmnd[0]);
+ scsi_set_resid(cmnd, scsi_bufflen(cmnd));
+ host_status = DID_ERROR;
+ }
+ /*
* The cmnd->underflow is the minimum number of bytes that must
* be transfered for this command. Provided a sense condition
* is not present, make sure the actual amount transferred is at
*/
if (!(resp_info & SNS_LEN_VALID) &&
(scsi_status == SAM_STAT_GOOD) &&
- (cmnd->request_bufflen - cmnd->resid) < cmnd->underflow) {
- lpfc_printf_log(phba, KERN_INFO, LOG_FCP,
- "%d:0717 FCP command x%x residual "
- "underrun converted to error "
- "Data: x%x x%x x%x\n", phba->brd_no,
- cmnd->cmnd[0], cmnd->request_bufflen,
- cmnd->resid, cmnd->underflow);
-
+ (scsi_bufflen(cmnd) - scsi_get_resid(cmnd)
+ < cmnd->underflow)) {
+ lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
+ "9027 FCP command x%x residual "
+ "underrun converted to error "
+ "Data: x%x x%x x%x\n",
+ cmnd->cmnd[0], scsi_bufflen(cmnd),
+ scsi_get_resid(cmnd), cmnd->underflow);
host_status = DID_ERROR;
}
} else if (resp_info & RESID_OVER) {
- lpfc_printf_log(phba, KERN_WARNING, LOG_FCP,
- "%d:0720 FCP command x%x residual "
- "overrun error. Data: x%x x%x \n",
- phba->brd_no, cmnd->cmnd[0],
- cmnd->request_bufflen, cmnd->resid);
+ lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
+ "9028 FCP command x%x residual overrun error. "
+ "Data: x%x x%x \n", cmnd->cmnd[0],
+ scsi_bufflen(cmnd), scsi_get_resid(cmnd));
host_status = DID_ERROR;
/*
*/
} else if ((scsi_status == SAM_STAT_GOOD) && fcpi_parm &&
(cmnd->sc_data_direction == DMA_FROM_DEVICE)) {
- lpfc_printf_log(phba, KERN_WARNING, LOG_FCP,
- "%d:0734 FCP Read Check Error Data: "
- "x%x x%x x%x x%x\n", phba->brd_no,
- be32_to_cpu(fcpcmd->fcpDl),
- be32_to_cpu(fcprsp->rspResId),
- fcpi_parm, cmnd->cmnd[0]);
+ lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP | LOG_FCP_ERROR,
+ "9029 FCP Read Check Error Data: "
+ "x%x x%x x%x x%x\n",
+ be32_to_cpu(fcpcmd->fcpDl),
+ be32_to_cpu(fcprsp->rspResId),
+ fcpi_parm, cmnd->cmnd[0]);
host_status = DID_ERROR;
- cmnd->resid = cmnd->request_bufflen;
+ scsi_set_resid(cmnd, scsi_bufflen(cmnd));
}
out:
cmnd->result = ScsiResult(host_status, scsi_status);
+ lpfc_send_scsi_error_event(vport->phba, vport, lpfc_cmd, rsp_iocb);
}
+/**
+ * lpfc_scsi_cmd_iocb_cmpl: Scsi cmnd IOCB completion routine.
+ * @phba: The Hba for which this call is being executed.
+ * @pIocbIn: The command IOCBQ for the scsi cmnd.
+ * @pIocbOut: The response IOCBQ for the scsi cmnd .
+ *
+ * This routine assigns scsi command result by looking into response IOCB
+ * status field appropriately. This routine handles QUEUE FULL condition as
+ * well by ramping down device queue depth.
+ **/
static void
lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
struct lpfc_iocbq *pIocbOut)
{
struct lpfc_scsi_buf *lpfc_cmd =
(struct lpfc_scsi_buf *) pIocbIn->context1;
+ struct lpfc_vport *vport = pIocbIn->vport;
struct lpfc_rport_data *rdata = lpfc_cmd->rdata;
struct lpfc_nodelist *pnode = rdata->pnode;
struct scsi_cmnd *cmd = lpfc_cmd->pCmd;
- unsigned long iflag;
+ int result;
+ struct scsi_device *sdev, *tmp_sdev;
+ int depth = 0;
+ unsigned long flags;
+ struct lpfc_fast_path_event *fast_path_evt;
lpfc_cmd->result = pIocbOut->iocb.un.ulpWord[4];
lpfc_cmd->status = pIocbOut->iocb.ulpStatus;
+ if (pnode && NLP_CHK_NODE_ACT(pnode))
+ atomic_dec(&pnode->cmd_pending);
if (lpfc_cmd->status) {
if (lpfc_cmd->status == IOSTAT_LOCAL_REJECT &&
else if (lpfc_cmd->status >= IOSTAT_CNT)
lpfc_cmd->status = IOSTAT_DEFAULT;
- lpfc_printf_log(phba, KERN_WARNING, LOG_FCP,
- "%d:0729 FCP cmd x%x failed <%d/%d> status: "
- "x%x result: x%x Data: x%x x%x\n",
- phba->brd_no, cmd->cmnd[0], cmd->device->id,
- cmd->device->lun, lpfc_cmd->status,
- lpfc_cmd->result, pIocbOut->iocb.ulpContext,
- lpfc_cmd->cur_iocbq.iocb.ulpIoTag);
+ lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
+ "9030 FCP cmd x%x failed <%d/%d> "
+ "status: x%x result: x%x Data: x%x x%x\n",
+ cmd->cmnd[0],
+ cmd->device ? cmd->device->id : 0xffff,
+ cmd->device ? cmd->device->lun : 0xffff,
+ lpfc_cmd->status, lpfc_cmd->result,
+ pIocbOut->iocb.ulpContext,
+ lpfc_cmd->cur_iocbq.iocb.ulpIoTag);
switch (lpfc_cmd->status) {
case IOSTAT_FCP_RSP_ERROR:
/* Call FCP RSP handler to determine result */
- lpfc_handle_fcp_err(lpfc_cmd);
+ lpfc_handle_fcp_err(vport, lpfc_cmd, pIocbOut);
break;
case IOSTAT_NPORT_BSY:
case IOSTAT_FABRIC_BSY:
- cmd->result = ScsiResult(DID_BUS_BUSY, 0);
+ cmd->result = ScsiResult(DID_TRANSPORT_DISRUPTED, 0);
+ fast_path_evt = lpfc_alloc_fast_evt(phba);
+ if (!fast_path_evt)
+ break;
+ fast_path_evt->un.fabric_evt.event_type =
+ FC_REG_FABRIC_EVENT;
+ fast_path_evt->un.fabric_evt.subcategory =
+ (lpfc_cmd->status == IOSTAT_NPORT_BSY) ?
+ LPFC_EVENT_PORT_BUSY : LPFC_EVENT_FABRIC_BUSY;
+ if (pnode && NLP_CHK_NODE_ACT(pnode)) {
+ memcpy(&fast_path_evt->un.fabric_evt.wwpn,
+ &pnode->nlp_portname,
+ sizeof(struct lpfc_name));
+ memcpy(&fast_path_evt->un.fabric_evt.wwnn,
+ &pnode->nlp_nodename,
+ sizeof(struct lpfc_name));
+ }
+ fast_path_evt->vport = vport;
+ fast_path_evt->work_evt.evt =
+ LPFC_EVT_FASTPATH_MGMT_EVT;
+ spin_lock_irqsave(&phba->hbalock, flags);
+ list_add_tail(&fast_path_evt->work_evt.evt_listp,
+ &phba->work_list);
+ spin_unlock_irqrestore(&phba->hbalock, flags);
+ lpfc_worker_wake_up(phba);
break;
+ case IOSTAT_LOCAL_REJECT:
+ if (lpfc_cmd->result == IOERR_INVALID_RPI ||
+ lpfc_cmd->result == IOERR_NO_RESOURCES ||
+ lpfc_cmd->result == IOERR_ABORT_REQUESTED) {
+ cmd->result = ScsiResult(DID_REQUEUE, 0);
+ break;
+ }
+
+ if ((lpfc_cmd->result == IOERR_RX_DMA_FAILED ||
+ lpfc_cmd->result == IOERR_TX_DMA_FAILED) &&
+ pIocbOut->iocb.unsli3.sli3_bg.bgstat) {
+ if (scsi_get_prot_op(cmd) != SCSI_PROT_NORMAL) {
+ /*
+ * This is a response for a BG enabled
+ * cmd. Parse BG error
+ */
+ lpfc_parse_bg_err(phba, lpfc_cmd,
+ pIocbOut);
+ break;
+ } else {
+ lpfc_printf_vlog(vport, KERN_WARNING,
+ LOG_BG,
+ "9031 non-zero BGSTAT "
+ "on unprotected cmd");
+ }
+ }
+
+ /* else: fall through */
default:
cmd->result = ScsiResult(DID_ERROR, 0);
break;
}
- if (pnode) {
- if (pnode->nlp_state != NLP_STE_MAPPED_NODE)
- cmd->result = ScsiResult(DID_BUS_BUSY,
- SAM_STAT_BUSY);
+ if (!pnode || !NLP_CHK_NODE_ACT(pnode)
+ || (pnode->nlp_state != NLP_STE_MAPPED_NODE))
+ cmd->result = ScsiResult(DID_TRANSPORT_DISRUPTED,
+ SAM_STAT_BUSY);
+ } else {
+ cmd->result = ScsiResult(DID_OK, 0);
+ }
+
+ if (cmd->result || lpfc_cmd->fcp_rsp->rspSnsLen) {
+ uint32_t *lp = (uint32_t *)cmd->sense_buffer;
+
+ lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
+ "0710 Iodone <%d/%d> cmd %p, error "
+ "x%x SNS x%x x%x Data: x%x x%x\n",
+ cmd->device->id, cmd->device->lun, cmd,
+ cmd->result, *lp, *(lp + 3), cmd->retries,
+ scsi_get_resid(cmd));
+ }
+
+ lpfc_update_stats(phba, lpfc_cmd);
+ result = cmd->result;
+ sdev = cmd->device;
+ if (vport->cfg_max_scsicmpl_time &&
+ time_after(jiffies, lpfc_cmd->start_time +
+ msecs_to_jiffies(vport->cfg_max_scsicmpl_time))) {
+ spin_lock_irqsave(sdev->host->host_lock, flags);
+ if (pnode && NLP_CHK_NODE_ACT(pnode)) {
+ if (pnode->cmd_qdepth >
+ atomic_read(&pnode->cmd_pending) &&
+ (atomic_read(&pnode->cmd_pending) >
+ LPFC_MIN_TGT_QDEPTH) &&
+ ((cmd->cmnd[0] == READ_10) ||
+ (cmd->cmnd[0] == WRITE_10)))
+ pnode->cmd_qdepth =
+ atomic_read(&pnode->cmd_pending);
+
+ pnode->last_change_time = jiffies;
+ }
+ spin_unlock_irqrestore(sdev->host->host_lock, flags);
+ } else if (pnode && NLP_CHK_NODE_ACT(pnode)) {
+ if ((pnode->cmd_qdepth < LPFC_MAX_TGT_QDEPTH) &&
+ time_after(jiffies, pnode->last_change_time +
+ msecs_to_jiffies(LPFC_TGTQ_INTERVAL))) {
+ spin_lock_irqsave(sdev->host->host_lock, flags);
+ pnode->cmd_qdepth += pnode->cmd_qdepth *
+ LPFC_TGTQ_RAMPUP_PCENT / 100;
+ if (pnode->cmd_qdepth > LPFC_MAX_TGT_QDEPTH)
+ pnode->cmd_qdepth = LPFC_MAX_TGT_QDEPTH;
+ pnode->last_change_time = jiffies;
+ spin_unlock_irqrestore(sdev->host->host_lock, flags);
+ }
+ }
+
+ lpfc_scsi_unprep_dma_buf(phba, lpfc_cmd);
+ cmd->scsi_done(cmd);
+
+ if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) {
+ /*
+ * If there is a thread waiting for command completion
+ * wake up the thread.
+ */
+ spin_lock_irqsave(sdev->host->host_lock, flags);
+ lpfc_cmd->pCmd = NULL;
+ if (lpfc_cmd->waitq)
+ wake_up(lpfc_cmd->waitq);
+ spin_unlock_irqrestore(sdev->host->host_lock, flags);
+ lpfc_release_scsi_buf(phba, lpfc_cmd);
+ return;
+ }
+
+
+ if (!result)
+ lpfc_rampup_queue_depth(vport, sdev);
+
+ if (!result && pnode && NLP_CHK_NODE_ACT(pnode) &&
+ ((jiffies - pnode->last_ramp_up_time) >
+ LPFC_Q_RAMP_UP_INTERVAL * HZ) &&
+ ((jiffies - pnode->last_q_full_time) >
+ LPFC_Q_RAMP_UP_INTERVAL * HZ) &&
+ (vport->cfg_lun_queue_depth > sdev->queue_depth)) {
+ shost_for_each_device(tmp_sdev, sdev->host) {
+ if (vport->cfg_lun_queue_depth > tmp_sdev->queue_depth){
+ if (tmp_sdev->id != sdev->id)
+ continue;
+ if (tmp_sdev->ordered_tags)
+ scsi_adjust_queue_depth(tmp_sdev,
+ MSG_ORDERED_TAG,
+ tmp_sdev->queue_depth+1);
+ else
+ scsi_adjust_queue_depth(tmp_sdev,
+ MSG_SIMPLE_TAG,
+ tmp_sdev->queue_depth+1);
+
+ pnode->last_ramp_up_time = jiffies;
+ }
+ }
+ lpfc_send_sdev_queuedepth_change_event(phba, vport, pnode,
+ 0xFFFFFFFF,
+ sdev->queue_depth - 1, sdev->queue_depth);
+ }
+
+ /*
+ * Check for queue full. If the lun is reporting queue full, then
+ * back off the lun queue depth to prevent target overloads.
+ */
+ if (result == SAM_STAT_TASK_SET_FULL && pnode &&
+ NLP_CHK_NODE_ACT(pnode)) {
+ pnode->last_q_full_time = jiffies;
+
+ shost_for_each_device(tmp_sdev, sdev->host) {
+ if (tmp_sdev->id != sdev->id)
+ continue;
+ depth = scsi_track_queue_full(tmp_sdev,
+ tmp_sdev->queue_depth - 1);
}
- else {
- cmd->result = ScsiResult(DID_NO_CONNECT, 0);
+ /*
+ * The queue depth cannot be lowered any more.
+ * Modify the returned error code to store
+ * the final depth value set by
+ * scsi_track_queue_full.
+ */
+ if (depth == -1)
+ depth = sdev->host->cmd_per_lun;
+
+ if (depth) {
+ lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
+ "0711 detected queue full - lun queue "
+ "depth adjusted to %d.\n", depth);
+ lpfc_send_sdev_queuedepth_change_event(phba, vport,
+ pnode, 0xFFFFFFFF,
+ depth+1, depth);
}
- } else {
- cmd->result = ScsiResult(DID_OK, 0);
}
- if (cmd->result || lpfc_cmd->fcp_rsp->rspSnsLen) {
- uint32_t *lp = (uint32_t *)cmd->sense_buffer;
-
- lpfc_printf_log(phba, KERN_INFO, LOG_FCP,
- "%d:0710 Iodone <%d/%d> cmd %p, error x%x "
- "SNS x%x x%x Data: x%x x%x\n",
- phba->brd_no, cmd->device->id,
- cmd->device->lun, cmd, cmd->result,
- *lp, *(lp + 3), cmd->retries, cmd->resid);
- }
+ /*
+ * If there is a thread waiting for command completion
+ * wake up the thread.
+ */
+ spin_lock_irqsave(sdev->host->host_lock, flags);
+ lpfc_cmd->pCmd = NULL;
+ if (lpfc_cmd->waitq)
+ wake_up(lpfc_cmd->waitq);
+ spin_unlock_irqrestore(sdev->host->host_lock, flags);
- spin_lock_irqsave(phba->host->host_lock, iflag);
- lpfc_free_scsi_buf(lpfc_cmd);
- cmd->host_scribble = NULL;
- spin_unlock_irqrestore(phba->host->host_lock, iflag);
+ lpfc_release_scsi_buf(phba, lpfc_cmd);
+}
- cmd->scsi_done(cmd);
+/**
+ * lpfc_fcpcmd_to_iocb - copy the fcp_cmd data into the IOCB.
+ * @data: A pointer to the immediate command data portion of the IOCB.
+ * @fcp_cmnd: The FCP Command that is provided by the SCSI layer.
+ *
+ * The routine copies the entire FCP command from @fcp_cmnd to @data while
+ * byte swapping the data to big endian format for transmission on the wire.
+ **/
+static void
+lpfc_fcpcmd_to_iocb(uint8_t *data, struct fcp_cmnd *fcp_cmnd)
+{
+ int i, j;
+ for (i = 0, j = 0; i < sizeof(struct fcp_cmnd);
+ i += sizeof(uint32_t), j++) {
+ ((uint32_t *)data)[j] = cpu_to_be32(((uint32_t *)fcp_cmnd)[j]);
+ }
}
+/**
+ * lpfc_scsi_prep_cmnd: Routine to convert scsi cmnd to FCP information unit.
+ * @vport: The virtual port for which this call is being executed.
+ * @lpfc_cmd: The scsi command which needs to send.
+ * @pnode: Pointer to lpfc_nodelist.
+ *
+ * This routine initializes fcp_cmnd and iocb data structure from scsi command
+ * to transfer.
+ **/
static void
-lpfc_scsi_prep_cmnd(struct lpfc_hba * phba, struct lpfc_scsi_buf * lpfc_cmd,
- struct lpfc_nodelist *pnode)
+lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
+ struct lpfc_nodelist *pnode)
{
+ struct lpfc_hba *phba = vport->phba;
struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd;
IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
struct lpfc_iocbq *piocbq = &(lpfc_cmd->cur_iocbq);
int datadir = scsi_cmnd->sc_data_direction;
+ char tag[2];
+
+ if (!pnode || !NLP_CHK_NODE_ACT(pnode))
+ return;
lpfc_cmd->fcp_rsp->rspSnsLen = 0;
+ /* clear task management bits */
+ lpfc_cmd->fcp_cmnd->fcpCntl2 = 0;
- lpfc_put_lun(lpfc_cmd->fcp_cmnd, lpfc_cmd->pCmd->device->lun);
+ int_to_scsilun(lpfc_cmd->pCmd->device->lun,
+ &lpfc_cmd->fcp_cmnd->fcp_lun);
memcpy(&fcp_cmnd->fcpCdb[0], scsi_cmnd->cmnd, 16);
- if (scsi_cmnd->device->tagged_supported) {
- switch (scsi_cmnd->tag) {
+ if (scsi_populate_tag_msg(scsi_cmnd, tag)) {
+ switch (tag[0]) {
case HEAD_OF_QUEUE_TAG:
fcp_cmnd->fcpCntl1 = HEAD_OF_Q;
break;
* bumping the bpl beyond the fcp_cmnd and fcp_rsp regions to the first
* data bde entry.
*/
- if (scsi_cmnd->use_sg) {
- if (datadir == DMA_TO_DEVICE) {
- iocb_cmd->ulpCommand = CMD_FCP_IWRITE64_CR;
- iocb_cmd->un.fcpi.fcpi_parm = 0;
- iocb_cmd->ulpPU = 0;
- fcp_cmnd->fcpCntl3 = WRITE_DATA;
- phba->fc4OutputRequests++;
- } else {
- iocb_cmd->ulpCommand = CMD_FCP_IREAD64_CR;
- iocb_cmd->ulpPU = PARM_READ_CHECK;
- iocb_cmd->un.fcpi.fcpi_parm =
- scsi_cmnd->request_bufflen;
- fcp_cmnd->fcpCntl3 = READ_DATA;
- phba->fc4InputRequests++;
- }
- } else if (scsi_cmnd->request_buffer && scsi_cmnd->request_bufflen) {
+ if (scsi_sg_count(scsi_cmnd)) {
if (datadir == DMA_TO_DEVICE) {
iocb_cmd->ulpCommand = CMD_FCP_IWRITE64_CR;
iocb_cmd->un.fcpi.fcpi_parm = 0;
} else {
iocb_cmd->ulpCommand = CMD_FCP_IREAD64_CR;
iocb_cmd->ulpPU = PARM_READ_CHECK;
- iocb_cmd->un.fcpi.fcpi_parm =
- scsi_cmnd->request_bufflen;
fcp_cmnd->fcpCntl3 = READ_DATA;
phba->fc4InputRequests++;
}
fcp_cmnd->fcpCntl3 = 0;
phba->fc4ControlRequests++;
}
-
+ if (phba->sli_rev == 3 &&
+ !(phba->sli3_options & LPFC_SLI3_BG_ENABLED))
+ lpfc_fcpcmd_to_iocb(iocb_cmd->unsli3.fcp_ext.icd, fcp_cmnd);
/*
* Finish initializing those IOCB fields that are independent
* of the scsi_cmnd request_buffer
piocbq->iocb.ulpContext = pnode->nlp_rpi;
if (pnode->nlp_fcp_info & NLP_FCP_2_DEVICE)
piocbq->iocb.ulpFCP2Rcvy = 1;
+ else
+ piocbq->iocb.ulpFCP2Rcvy = 0;
piocbq->iocb.ulpClass = (pnode->nlp_fcp_info & 0x0f);
piocbq->context1 = lpfc_cmd;
piocbq->iocb_cmpl = lpfc_scsi_cmd_iocb_cmpl;
piocbq->iocb.ulpTimeout = lpfc_cmd->timeout;
+ piocbq->vport = vport;
}
+/**
+ * lpfc_scsi_prep_task_mgmt_cmnd: Convert scsi TM cmnd to FCP information unit.
+ * @vport: The virtual port for which this call is being executed.
+ * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
+ * @lun: Logical unit number.
+ * @task_mgmt_cmd: SCSI task management command.
+ *
+ * This routine creates FCP information unit corresponding to @task_mgmt_cmd.
+ *
+ * Return codes:
+ * 0 - Error
+ * 1 - Success
+ **/
static int
-lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_hba *phba,
+lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport,
struct lpfc_scsi_buf *lpfc_cmd,
+ unsigned int lun,
uint8_t task_mgmt_cmd)
{
- struct lpfc_sli *psli;
struct lpfc_iocbq *piocbq;
IOCB_t *piocb;
struct fcp_cmnd *fcp_cmnd;
- struct scsi_device *scsi_dev = lpfc_cmd->pCmd->device;
- struct lpfc_rport_data *rdata = scsi_dev->hostdata;
+ struct lpfc_rport_data *rdata = lpfc_cmd->rdata;
struct lpfc_nodelist *ndlp = rdata->pnode;
- if ((ndlp == 0) || (ndlp->nlp_state != NLP_STE_MAPPED_NODE)) {
+ if (!ndlp || !NLP_CHK_NODE_ACT(ndlp) ||
+ ndlp->nlp_state != NLP_STE_MAPPED_NODE)
return 0;
- }
- psli = &phba->sli;
piocbq = &(lpfc_cmd->cur_iocbq);
+ piocbq->vport = vport;
+
piocb = &piocbq->iocb;
fcp_cmnd = lpfc_cmd->fcp_cmnd;
- lpfc_put_lun(lpfc_cmd->fcp_cmnd, lpfc_cmd->pCmd->device->lun);
+ /* Clear out any old data in the FCP command area */
+ memset(fcp_cmnd, 0, sizeof(struct fcp_cmnd));
+ int_to_scsilun(lun, &fcp_cmnd->fcp_lun);
fcp_cmnd->fcpCntl2 = task_mgmt_cmd;
-
+ if (vport->phba->sli_rev == 3 &&
+ !(vport->phba->sli3_options & LPFC_SLI3_BG_ENABLED))
+ lpfc_fcpcmd_to_iocb(piocb->unsli3.fcp_ext.icd, fcp_cmnd);
piocb->ulpCommand = CMD_FCP_ICMND64_CR;
-
piocb->ulpContext = ndlp->nlp_rpi;
if (ndlp->nlp_fcp_info & NLP_FCP_2_DEVICE) {
piocb->ulpFCP2Rcvy = 1;
piocb->ulpTimeout = lpfc_cmd->timeout;
}
- lpfc_cmd->rdata = rdata;
-
- switch (task_mgmt_cmd) {
- case FCP_LUN_RESET:
- /* Issue LUN Reset to TGT <num> LUN <num> */
- lpfc_printf_log(phba,
- KERN_INFO,
- LOG_FCP,
- "%d:0703 Issue LUN Reset to TGT %d LUN %d "
- "Data: x%x x%x\n",
- phba->brd_no,
- scsi_dev->id, scsi_dev->lun,
- ndlp->nlp_rpi, ndlp->nlp_flag);
-
- break;
- case FCP_ABORT_TASK_SET:
- /* Issue Abort Task Set to TGT <num> LUN <num> */
- lpfc_printf_log(phba,
- KERN_INFO,
- LOG_FCP,
- "%d:0701 Issue Abort Task Set to TGT %d LUN %d "
- "Data: x%x x%x\n",
- phba->brd_no,
- scsi_dev->id, scsi_dev->lun,
- ndlp->nlp_rpi, ndlp->nlp_flag);
-
- break;
- case FCP_TARGET_RESET:
- /* Issue Target Reset to TGT <num> */
- lpfc_printf_log(phba,
- KERN_INFO,
- LOG_FCP,
- "%d:0702 Issue Target Reset to TGT %d "
- "Data: x%x x%x\n",
- phba->brd_no,
- scsi_dev->id, ndlp->nlp_rpi,
- ndlp->nlp_flag);
- break;
- }
+ return 1;
+}
- return (1);
+/**
+ * lpc_taskmgmt_def_cmpl: IOCB completion routine for task management command.
+ * @phba: The Hba for which this call is being executed.
+ * @cmdiocbq: Pointer to lpfc_iocbq data structure.
+ * @rspiocbq: Pointer to lpfc_iocbq data structure.
+ *
+ * This routine is IOCB completion routine for device reset and target reset
+ * routine. This routine release scsi buffer associated with lpfc_cmd.
+ **/
+static void
+lpfc_tskmgmt_def_cmpl(struct lpfc_hba *phba,
+ struct lpfc_iocbq *cmdiocbq,
+ struct lpfc_iocbq *rspiocbq)
+{
+ struct lpfc_scsi_buf *lpfc_cmd =
+ (struct lpfc_scsi_buf *) cmdiocbq->context1;
+ if (lpfc_cmd)
+ lpfc_release_scsi_buf(phba, lpfc_cmd);
+ return;
}
+/**
+ * lpfc_scsi_tgt_reset: Target reset handler.
+ * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure
+ * @vport: The virtual port for which this call is being executed.
+ * @tgt_id: Target ID.
+ * @lun: Lun number.
+ * @rdata: Pointer to lpfc_rport_data.
+ *
+ * This routine issues a TARGET RESET iocb to reset a target with @tgt_id ID.
+ *
+ * Return Code:
+ * 0x2003 - Error
+ * 0x2002 - Success.
+ **/
static int
-lpfc_scsi_tgt_reset(struct lpfc_scsi_buf * lpfc_cmd, struct lpfc_hba * phba)
+lpfc_scsi_tgt_reset(struct lpfc_scsi_buf *lpfc_cmd, struct lpfc_vport *vport,
+ unsigned tgt_id, unsigned int lun,
+ struct lpfc_rport_data *rdata)
{
+ struct lpfc_hba *phba = vport->phba;
struct lpfc_iocbq *iocbq;
- struct lpfc_iocbq *iocbqrsp = NULL;
- struct list_head *lpfc_iocb_list = &phba->lpfc_iocb_list;
+ struct lpfc_iocbq *iocbqrsp;
int ret;
+ int status;
+
+ if (!rdata->pnode || !NLP_CHK_NODE_ACT(rdata->pnode))
+ return FAILED;
- ret = lpfc_scsi_prep_task_mgmt_cmd(phba, lpfc_cmd, FCP_TARGET_RESET);
- if (!ret)
+ lpfc_cmd->rdata = rdata;
+ status = lpfc_scsi_prep_task_mgmt_cmd(vport, lpfc_cmd, lun,
+ FCP_TARGET_RESET);
+ if (!status)
return FAILED;
- lpfc_cmd->scsi_hba = phba;
iocbq = &lpfc_cmd->cur_iocbq;
- list_remove_head(lpfc_iocb_list, iocbqrsp, struct lpfc_iocbq, list);
+ iocbqrsp = lpfc_sli_get_iocbq(phba);
+
if (!iocbqrsp)
return FAILED;
- memset(iocbqrsp, 0, sizeof (struct lpfc_iocbq));
-
- iocbq->iocb_flag |= LPFC_IO_POLL;
- ret = lpfc_sli_issue_iocb_wait_high_priority(phba,
- &phba->sli.ring[phba->sli.fcp_ring],
- iocbq, SLI_IOCB_HIGH_PRIORITY,
- iocbqrsp,
- lpfc_cmd->timeout);
- if (ret != IOCB_SUCCESS) {
+
+ /* Issue Target Reset to TGT <num> */
+ lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
+ "0702 Issue Target Reset to TGT %d Data: x%x x%x\n",
+ tgt_id, rdata->pnode->nlp_rpi, rdata->pnode->nlp_flag);
+ status = lpfc_sli_issue_iocb_wait(phba,
+ &phba->sli.ring[phba->sli.fcp_ring],
+ iocbq, iocbqrsp, lpfc_cmd->timeout);
+ if (status != IOCB_SUCCESS) {
+ if (status == IOCB_TIMEDOUT) {
+ iocbq->iocb_cmpl = lpfc_tskmgmt_def_cmpl;
+ ret = TIMEOUT_ERROR;
+ } else
+ ret = FAILED;
lpfc_cmd->status = IOSTAT_DRIVER_REJECT;
- ret = FAILED;
} else {
ret = SUCCESS;
lpfc_cmd->result = iocbqrsp->iocb.un.ulpWord[4];
lpfc_cmd->status = IOSTAT_DRIVER_REJECT;
}
- /*
- * All outstanding txcmplq I/Os should have been aborted by the target.
- * Unfortunately, some targets do not abide by this forcing the driver
- * to double check.
- */
- lpfc_sli_abort_iocb(phba, &phba->sli.ring[phba->sli.fcp_ring],
- lpfc_cmd->pCmd->device->id,
- lpfc_cmd->pCmd->device->lun, 0, LPFC_CTX_TGT);
-
- /* Return response IOCB to free list. */
- list_add_tail(&iocbqrsp->list, lpfc_iocb_list);
+ lpfc_sli_release_iocbq(phba, iocbqrsp);
return ret;
}
-static void
-lpfc_scsi_cmd_iocb_cleanup (struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
- struct lpfc_iocbq *pIocbOut)
-{
- unsigned long iflag;
- struct lpfc_scsi_buf *lpfc_cmd =
- (struct lpfc_scsi_buf *) pIocbIn->context1;
-
- spin_lock_irqsave(phba->host->host_lock, iflag);
- lpfc_free_scsi_buf(lpfc_cmd);
- spin_unlock_irqrestore(phba->host->host_lock, iflag);
-}
-
-static void
-lpfc_scsi_cmd_iocb_cmpl_aborted(struct lpfc_hba *phba,
- struct lpfc_iocbq *pIocbIn,
- struct lpfc_iocbq *pIocbOut)
-{
- struct scsi_cmnd *ml_cmd =
- ((struct lpfc_scsi_buf *) pIocbIn->context1)->pCmd;
-
- lpfc_scsi_cmd_iocb_cleanup (phba, pIocbIn, pIocbOut);
- ml_cmd->host_scribble = NULL;
-}
-
+/**
+ * lpfc_info: Info entry point of scsi_host_template data structure.
+ * @host: The scsi host for which this call is being executed.
+ *
+ * This routine provides module information about hba.
+ *
+ * Reutrn code:
+ * Pointer to char - Success.
+ **/
const char *
lpfc_info(struct Scsi_Host *host)
{
- struct lpfc_hba *phba = (struct lpfc_hba *) host->hostdata[0];
+ struct lpfc_vport *vport = (struct lpfc_vport *) host->hostdata;
+ struct lpfc_hba *phba = vport->phba;
int len;
static char lpfcinfobuf[384];
return lpfcinfobuf;
}
+/**
+ * lpfc_poll_rearm_time: Routine to modify fcp_poll timer of hba.
+ * @phba: The Hba for which this call is being executed.
+ *
+ * This routine modifies fcp_poll_timer field of @phba by cfg_poll_tmo.
+ * The default value of cfg_poll_tmo is 10 milliseconds.
+ **/
+static __inline__ void lpfc_poll_rearm_timer(struct lpfc_hba * phba)
+{
+ unsigned long poll_tmo_expires =
+ (jiffies + msecs_to_jiffies(phba->cfg_poll_tmo));
+
+ if (phba->sli.ring[LPFC_FCP_RING].txcmplq_cnt)
+ mod_timer(&phba->fcp_poll_timer,
+ poll_tmo_expires);
+}
+
+/**
+ * lpfc_poll_start_timer: Routine to start fcp_poll_timer of HBA.
+ * @phba: The Hba for which this call is being executed.
+ *
+ * This routine starts the fcp_poll_timer of @phba.
+ **/
+void lpfc_poll_start_timer(struct lpfc_hba * phba)
+{
+ lpfc_poll_rearm_timer(phba);
+}
+
+/**
+ * lpfc_poll_timeout: Restart polling timer.
+ * @ptr: Map to lpfc_hba data structure pointer.
+ *
+ * This routine restarts fcp_poll timer, when FCP ring polling is enable
+ * and FCP Ring interrupt is disable.
+ **/
+
+void lpfc_poll_timeout(unsigned long ptr)
+{
+ struct lpfc_hba *phba = (struct lpfc_hba *) ptr;
+
+ if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) {
+ lpfc_sli_poll_fcp_ring (phba);
+ if (phba->cfg_poll & DISABLE_FCP_RING_INT)
+ lpfc_poll_rearm_timer(phba);
+ }
+}
+
+/**
+ * lpfc_queuecommand: Queuecommand entry point of Scsi Host Templater data
+ * structure.
+ * @cmnd: Pointer to scsi_cmnd data structure.
+ * @done: Pointer to done routine.
+ *
+ * Driver registers this routine to scsi midlayer to submit a @cmd to process.
+ * This routine prepares an IOCB from scsi command and provides to firmware.
+ * The @done callback is invoked after driver finished processing the command.
+ *
+ * Return value :
+ * 0 - Success
+ * SCSI_MLQUEUE_HOST_BUSY - Block all devices served by this host temporarily.
+ **/
static int
lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
{
- struct lpfc_hba *phba =
- (struct lpfc_hba *) cmnd->device->host->hostdata[0];
- struct lpfc_sli *psli = &phba->sli;
+ struct Scsi_Host *shost = cmnd->device->host;
+ struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+ struct lpfc_hba *phba = vport->phba;
+ struct lpfc_sli *psli = &phba->sli;
struct lpfc_rport_data *rdata = cmnd->device->hostdata;
struct lpfc_nodelist *ndlp = rdata->pnode;
- struct lpfc_scsi_buf *lpfc_cmd = NULL;
- struct list_head *scsi_buf_list = &phba->lpfc_scsi_buf_list;
- int err = 0;
+ struct lpfc_scsi_buf *lpfc_cmd;
+ struct fc_rport *rport = starget_to_rport(scsi_target(cmnd->device));
+ int err;
- /*
- * The target pointer is guaranteed not to be NULL because the driver
- * only clears the device->hostdata field in lpfc_slave_destroy. This
- * approach guarantees no further IO calls on this target.
- */
- if (!ndlp) {
- cmnd->result = ScsiResult(DID_NO_CONNECT, 0);
+ err = fc_remote_port_chkready(rport);
+ if (err) {
+ cmnd->result = err;
+ goto out_fail_command;
+ }
+
+ if (!(phba->sli3_options & LPFC_SLI3_BG_ENABLED) &&
+ scsi_get_prot_op(cmnd) != SCSI_PROT_NORMAL) {
+
+ printk(KERN_ERR "BLKGRD ERROR: rcvd protected cmd:%02x op:%02x "
+ "str=%s without registering for BlockGuard - "
+ "Rejecting command\n",
+ cmnd->cmnd[0], scsi_get_prot_op(cmnd),
+ dif_op_str[scsi_get_prot_op(cmnd)]);
goto out_fail_command;
}
/*
- * A Fibre Channel target is present and functioning only when the node
- * state is MAPPED. Any other state is a failure.
+ * Catch race where our node has transitioned, but the
+ * transport is still transitioning.
*/
- if (ndlp->nlp_state != NLP_STE_MAPPED_NODE) {
- if ((ndlp->nlp_state == NLP_STE_UNMAPPED_NODE) ||
- (ndlp->nlp_state == NLP_STE_UNUSED_NODE)) {
- cmnd->result = ScsiResult(DID_NO_CONNECT, 0);
- goto out_fail_command;
- }
- /*
- * The device is most likely recovered and the driver
- * needs a bit more time to finish. Ask the midlayer
- * to retry.
- */
- goto out_host_busy;
+ if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) {
+ cmnd->result = ScsiResult(DID_TRANSPORT_DISRUPTED, 0);
+ goto out_fail_command;
}
+ if (vport->cfg_max_scsicmpl_time &&
+ (atomic_read(&ndlp->cmd_pending) >= ndlp->cmd_qdepth))
+ goto out_host_busy;
- list_remove_head(scsi_buf_list, lpfc_cmd, struct lpfc_scsi_buf, list);
+ lpfc_cmd = lpfc_get_scsi_buf(phba);
if (lpfc_cmd == NULL) {
- printk(KERN_WARNING "%s: No buffer available - list empty, "
- "total count %d\n", __FUNCTION__, phba->total_scsi_bufs);
+ lpfc_rampdown_queue_depth(phba);
+
+ lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
+ "0707 driver's buffer pool is empty, "
+ "IO busied\n");
goto out_host_busy;
}
lpfc_cmd->pCmd = cmnd;
lpfc_cmd->rdata = rdata;
lpfc_cmd->timeout = 0;
+ lpfc_cmd->start_time = jiffies;
cmnd->host_scribble = (unsigned char *)lpfc_cmd;
cmnd->scsi_done = done;
- err = lpfc_scsi_prep_dma_buf(phba, lpfc_cmd);
+ if (scsi_get_prot_op(cmnd) != SCSI_PROT_NORMAL) {
+ lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
+ "9033 BLKGRD: rcvd protected cmd:%02x op:%02x "
+ "str=%s\n",
+ cmnd->cmnd[0], scsi_get_prot_op(cmnd),
+ dif_op_str[scsi_get_prot_op(cmnd)]);
+ lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
+ "9034 BLKGRD: CDB: %02x %02x %02x %02x %02x "
+ "%02x %02x %02x %02x %02x \n",
+ cmnd->cmnd[0], cmnd->cmnd[1], cmnd->cmnd[2],
+ cmnd->cmnd[3], cmnd->cmnd[4], cmnd->cmnd[5],
+ cmnd->cmnd[6], cmnd->cmnd[7], cmnd->cmnd[8],
+ cmnd->cmnd[9]);
+ if (cmnd->cmnd[0] == READ_10)
+ lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
+ "9035 BLKGRD: READ @ sector %llu, "
+ "count %lu\n",
+ (unsigned long long)scsi_get_lba(cmnd),
+ cmnd->request->nr_sectors);
+ else if (cmnd->cmnd[0] == WRITE_10)
+ lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
+ "9036 BLKGRD: WRITE @ sector %llu, "
+ "count %lu cmd=%p\n",
+ (unsigned long long)scsi_get_lba(cmnd),
+ cmnd->request->nr_sectors,
+ cmnd);
+
+ err = lpfc_bg_scsi_prep_dma_buf(phba, lpfc_cmd);
+ } else {
+ lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
+ "9038 BLKGRD: rcvd unprotected cmd:%02x op:%02x"
+ " str=%s\n",
+ cmnd->cmnd[0], scsi_get_prot_op(cmnd),
+ dif_op_str[scsi_get_prot_op(cmnd)]);
+ lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
+ "9039 BLKGRD: CDB: %02x %02x %02x %02x %02x "
+ "%02x %02x %02x %02x %02x \n",
+ cmnd->cmnd[0], cmnd->cmnd[1], cmnd->cmnd[2],
+ cmnd->cmnd[3], cmnd->cmnd[4], cmnd->cmnd[5],
+ cmnd->cmnd[6], cmnd->cmnd[7], cmnd->cmnd[8],
+ cmnd->cmnd[9]);
+ if (cmnd->cmnd[0] == READ_10)
+ lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
+ "9040 dbg: READ @ sector %llu, "
+ "count %lu\n",
+ (unsigned long long)scsi_get_lba(cmnd),
+ cmnd->request->nr_sectors);
+ else if (cmnd->cmnd[0] == WRITE_10)
+ lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
+ "9041 dbg: WRITE @ sector %llu, "
+ "count %lu cmd=%p\n",
+ (unsigned long long)scsi_get_lba(cmnd),
+ cmnd->request->nr_sectors, cmnd);
+ else
+ lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
+ "9042 dbg: parser not implemented\n");
+ err = lpfc_scsi_prep_dma_buf(phba, lpfc_cmd);
+ }
+
if (err)
goto out_host_busy_free_buf;
- lpfc_scsi_prep_cmnd(phba, lpfc_cmd, ndlp);
+ lpfc_scsi_prep_cmnd(vport, lpfc_cmd, ndlp);
+ atomic_inc(&ndlp->cmd_pending);
err = lpfc_sli_issue_iocb(phba, &phba->sli.ring[psli->fcp_ring],
- &lpfc_cmd->cur_iocbq, SLI_IOCB_RET_IOCB);
- if (err)
+ &lpfc_cmd->cur_iocbq, SLI_IOCB_RET_IOCB);
+ if (err) {
+ atomic_dec(&ndlp->cmd_pending);
goto out_host_busy_free_buf;
+ }
+ if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) {
+ lpfc_sli_poll_fcp_ring(phba);
+ if (phba->cfg_poll & DISABLE_FCP_RING_INT)
+ lpfc_poll_rearm_timer(phba);
+ }
+
return 0;
out_host_busy_free_buf:
- lpfc_free_scsi_buf(lpfc_cmd);
- cmnd->host_scribble = NULL;
+ lpfc_scsi_unprep_dma_buf(phba, lpfc_cmd);
+ lpfc_release_scsi_buf(phba, lpfc_cmd);
out_host_busy:
return SCSI_MLQUEUE_HOST_BUSY;
return 0;
}
+/**
+ * lpfc_block_error_handler: Routine to block error handler.
+ * @cmnd: Pointer to scsi_cmnd data structure.
+ *
+ * This routine blocks execution till fc_rport state is not FC_PORSTAT_BLCOEKD.
+ **/
+static void
+lpfc_block_error_handler(struct scsi_cmnd *cmnd)
+{
+ struct Scsi_Host *shost = cmnd->device->host;
+ struct fc_rport *rport = starget_to_rport(scsi_target(cmnd->device));
+
+ spin_lock_irq(shost->host_lock);
+ while (rport->port_state == FC_PORTSTATE_BLOCKED) {
+ spin_unlock_irq(shost->host_lock);
+ msleep(1000);
+ spin_lock_irq(shost->host_lock);
+ }
+ spin_unlock_irq(shost->host_lock);
+ return;
+}
+
+/**
+ * lpfc_abort_handler: Eh_abort_handler entry point of Scsi Host Template data
+ *structure.
+ * @cmnd: Pointer to scsi_cmnd data structure.
+ *
+ * This routine aborts @cmnd pending in base driver.
+ *
+ * Return code :
+ * 0x2003 - Error
+ * 0x2002 - Success
+ **/
static int
-__lpfc_abort_handler(struct scsi_cmnd *cmnd)
+lpfc_abort_handler(struct scsi_cmnd *cmnd)
{
- struct lpfc_hba *phba =
- (struct lpfc_hba *)cmnd->device->host->hostdata[0];
+ struct Scsi_Host *shost = cmnd->device->host;
+ struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+ struct lpfc_hba *phba = vport->phba;
struct lpfc_sli_ring *pring = &phba->sli.ring[phba->sli.fcp_ring];
- struct lpfc_iocbq *iocb, *next_iocb;
- struct lpfc_iocbq *abtsiocb = NULL;
+ struct lpfc_iocbq *iocb;
+ struct lpfc_iocbq *abtsiocb;
struct lpfc_scsi_buf *lpfc_cmd;
- struct list_head *lpfc_iocb_list = &phba->lpfc_iocb_list;
IOCB_t *cmd, *icmd;
- unsigned long snum;
- unsigned int id, lun;
- unsigned int loop_count = 0;
- int ret = IOCB_SUCCESS;
+ int ret = SUCCESS;
+ DECLARE_WAIT_QUEUE_HEAD_ONSTACK(waitq);
- /*
- * If the host_scribble data area is NULL, then the driver has already
- * completed this command, but the midlayer did not see the completion
- * before the eh fired. Just return SUCCESS.
- */
+ lpfc_block_error_handler(cmnd);
lpfc_cmd = (struct lpfc_scsi_buf *)cmnd->host_scribble;
- if (!lpfc_cmd)
- return SUCCESS;
-
- /* save these now since lpfc_cmd can be freed */
- id = lpfc_cmd->pCmd->device->id;
- lun = lpfc_cmd->pCmd->device->lun;
- snum = lpfc_cmd->pCmd->serial_number;
+ BUG_ON(!lpfc_cmd);
- list_for_each_entry_safe(iocb, next_iocb, &pring->txq, list) {
- cmd = &iocb->iocb;
- if (iocb->context1 != lpfc_cmd)
- continue;
+ /*
+ * If pCmd field of the corresponding lpfc_scsi_buf structure
+ * points to a different SCSI command, then the driver has
+ * already completed this command, but the midlayer did not
+ * see the completion before the eh fired. Just return
+ * SUCCESS.
+ */
+ iocb = &lpfc_cmd->cur_iocbq;
+ if (lpfc_cmd->pCmd != cmnd)
+ goto out;
- list_del_init(&iocb->list);
- pring->txq_cnt--;
- if (!iocb->iocb_cmpl) {
- list_add_tail(&iocb->list, lpfc_iocb_list);
- }
- else {
- cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
- lpfc_scsi_cmd_iocb_cmpl_aborted(phba, iocb, iocb);
- }
+ BUG_ON(iocb->context1 != lpfc_cmd);
+ abtsiocb = lpfc_sli_get_iocbq(phba);
+ if (abtsiocb == NULL) {
+ ret = FAILED;
goto out;
}
- list_remove_head(lpfc_iocb_list, abtsiocb, struct lpfc_iocbq, list);
- if (abtsiocb == NULL)
- return FAILED;
-
- memset(abtsiocb, 0, sizeof (struct lpfc_iocbq));
-
/*
- * The scsi command was not in the txq. Check the txcmplq and if it is
- * found, send an abort to the FW.
+ * The scsi command can not be in txq and it is in flight because the
+ * pCmd is still pointig at the SCSI command we have to abort. There
+ * is no need to search the txcmplq. Just send an abort to the FW.
*/
- list_for_each_entry_safe(iocb, next_iocb, &pring->txcmplq, list) {
- if (iocb->context1 != lpfc_cmd)
- continue;
- iocb->iocb_cmpl = lpfc_scsi_cmd_iocb_cmpl_aborted;
- cmd = &iocb->iocb;
- icmd = &abtsiocb->iocb;
- icmd->un.acxri.abortType = ABORT_TYPE_ABTS;
- icmd->un.acxri.abortContextTag = cmd->ulpContext;
- icmd->un.acxri.abortIoTag = cmd->ulpIoTag;
-
- icmd->ulpLe = 1;
- icmd->ulpClass = cmd->ulpClass;
- if (phba->hba_state >= LPFC_LINK_UP)
- icmd->ulpCommand = CMD_ABORT_XRI_CN;
- else
- icmd->ulpCommand = CMD_CLOSE_XRI_CN;
+ cmd = &iocb->iocb;
+ icmd = &abtsiocb->iocb;
+ icmd->un.acxri.abortType = ABORT_TYPE_ABTS;
+ icmd->un.acxri.abortContextTag = cmd->ulpContext;
+ icmd->un.acxri.abortIoTag = cmd->ulpIoTag;
- abtsiocb->iocb_cmpl = lpfc_sli_abort_fcp_cmpl;
- if (lpfc_sli_issue_iocb(phba, pring, abtsiocb, 0) ==
- IOCB_ERROR) {
- list_add_tail(&abtsiocb->list, lpfc_iocb_list);
- ret = IOCB_ERROR;
- break;
- }
+ icmd->ulpLe = 1;
+ icmd->ulpClass = cmd->ulpClass;
+ if (lpfc_is_link_up(phba))
+ icmd->ulpCommand = CMD_ABORT_XRI_CN;
+ else
+ icmd->ulpCommand = CMD_CLOSE_XRI_CN;
- /* Wait for abort to complete */
- while (cmnd->host_scribble)
- {
- spin_unlock_irq(phba->host->host_lock);
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout(LPFC_ABORT_WAIT*HZ);
- spin_lock_irq(phba->host->host_lock);
- if (++loop_count
- > (2 * phba->cfg_nodev_tmo)/LPFC_ABORT_WAIT)
- break;
- }
+ abtsiocb->iocb_cmpl = lpfc_sli_abort_fcp_cmpl;
+ abtsiocb->vport = vport;
+ if (lpfc_sli_issue_iocb(phba, pring, abtsiocb, 0) == IOCB_ERROR) {
+ lpfc_sli_release_iocbq(phba, abtsiocb);
+ ret = FAILED;
+ goto out;
+ }
- if(cmnd->host_scribble) {
- lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
- "%d:0748 abort handler timed "
- "out waiting for abort to "
- "complete. Data: "
- "x%x x%x x%x x%lx\n",
- phba->brd_no, ret, id, lun, snum);
- cmnd->host_scribble = NULL;
- iocb->iocb_cmpl = lpfc_scsi_cmd_iocb_cleanup;
- ret = IOCB_ERROR;
- }
+ if (phba->cfg_poll & DISABLE_FCP_RING_INT)
+ lpfc_sli_poll_fcp_ring (phba);
- break;
- }
+ lpfc_cmd->waitq = &waitq;
+ /* Wait for abort to complete */
+ wait_event_timeout(waitq,
+ (lpfc_cmd->pCmd != cmnd),
+ (2*vport->cfg_devloss_tmo*HZ));
- out:
- lpfc_printf_log(phba, KERN_WARNING, LOG_FCP,
- "%d:0749 SCSI layer issued abort device "
- "Data: x%x x%x x%x x%lx\n",
- phba->brd_no, ret, id, lun, snum);
+ spin_lock_irq(shost->host_lock);
+ lpfc_cmd->waitq = NULL;
+ spin_unlock_irq(shost->host_lock);
- return ret == IOCB_SUCCESS ? SUCCESS : FAILED;
-}
+ if (lpfc_cmd->pCmd == cmnd) {
+ ret = FAILED;
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
+ "0748 abort handler timed out waiting "
+ "for abort to complete: ret %#x, ID %d, "
+ "LUN %d, snum %#lx\n",
+ ret, cmnd->device->id, cmnd->device->lun,
+ cmnd->serial_number);
+ }
-static int
-lpfc_abort_handler(struct scsi_cmnd *cmnd)
-{
- int rc;
- spin_lock_irq(cmnd->device->host->host_lock);
- rc = __lpfc_abort_handler(cmnd);
- spin_unlock_irq(cmnd->device->host->host_lock);
- return rc;
+ out:
+ lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
+ "0749 SCSI Layer I/O Abort Request Status x%x ID %d "
+ "LUN %d snum %#lx\n", ret, cmnd->device->id,
+ cmnd->device->lun, cmnd->serial_number);
+ return ret;
}
+/**
+ * lpfc_device_reset_handler: eh_device_reset entry point of Scsi Host Template
+ *data structure.
+ * @cmnd: Pointer to scsi_cmnd data structure.
+ *
+ * This routine does a device reset by sending a TARGET_RESET task management
+ * command.
+ *
+ * Return code :
+ * 0x2003 - Error
+ * 0ex2002 - Success
+ **/
static int
-__lpfc_reset_lun_handler(struct scsi_cmnd *cmnd)
+lpfc_device_reset_handler(struct scsi_cmnd *cmnd)
{
- struct Scsi_Host *shost = cmnd->device->host;
- struct lpfc_hba *phba = (struct lpfc_hba *)shost->hostdata[0];
- struct lpfc_sli *psli = &phba->sli;
- struct lpfc_scsi_buf *lpfc_cmd = NULL;
- struct list_head *scsi_buf_list = &phba->lpfc_scsi_buf_list;
- struct list_head *lpfc_iocb_list = &phba->lpfc_iocb_list;
- struct lpfc_iocbq *iocbq, *iocbqrsp = NULL;
+ struct Scsi_Host *shost = cmnd->device->host;
+ struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+ struct lpfc_hba *phba = vport->phba;
+ struct lpfc_scsi_buf *lpfc_cmd;
+ struct lpfc_iocbq *iocbq, *iocbqrsp;
struct lpfc_rport_data *rdata = cmnd->device->hostdata;
struct lpfc_nodelist *pnode = rdata->pnode;
- int ret = FAILED;
- int cnt, loopcnt;
+ unsigned long later;
+ int ret = SUCCESS;
+ int status;
+ int cnt;
+ struct lpfc_scsi_event_header scsi_event;
+ lpfc_block_error_handler(cmnd);
/*
* If target is not in a MAPPED state, delay the reset until
- * target is rediscovered or nodev timeout expires.
+ * target is rediscovered or devloss timeout expires.
*/
- while ( 1 ) {
- if (!pnode)
+ later = msecs_to_jiffies(2 * vport->cfg_devloss_tmo * 1000) + jiffies;
+ while (time_after(later, jiffies)) {
+ if (!pnode || !NLP_CHK_NODE_ACT(pnode))
+ return FAILED;
+ if (pnode->nlp_state == NLP_STE_MAPPED_NODE)
break;
-
- if (pnode->nlp_state != NLP_STE_MAPPED_NODE) {
- spin_unlock_irq(phba->host->host_lock);
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout( HZ/2);
- spin_lock_irq(phba->host->host_lock);
- }
- if ((pnode) && (pnode->nlp_state == NLP_STE_MAPPED_NODE))
+ schedule_timeout_uninterruptible(msecs_to_jiffies(500));
+ rdata = cmnd->device->hostdata;
+ if (!rdata)
break;
+ pnode = rdata->pnode;
}
- list_remove_head(scsi_buf_list, lpfc_cmd, struct lpfc_scsi_buf, list);
+ scsi_event.event_type = FC_REG_SCSI_EVENT;
+ scsi_event.subcategory = LPFC_EVENT_TGTRESET;
+ scsi_event.lun = 0;
+ memcpy(scsi_event.wwpn, &pnode->nlp_portname, sizeof(struct lpfc_name));
+ memcpy(scsi_event.wwnn, &pnode->nlp_nodename, sizeof(struct lpfc_name));
+
+ fc_host_post_vendor_event(shost,
+ fc_get_event_number(),
+ sizeof(scsi_event),
+ (char *)&scsi_event,
+ LPFC_NL_VENDOR_ID);
+
+ if (!rdata || pnode->nlp_state != NLP_STE_MAPPED_NODE) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
+ "0721 LUN Reset rport "
+ "failure: msec x%x rdata x%p\n",
+ jiffies_to_msecs(jiffies - later), rdata);
+ return FAILED;
+ }
+ lpfc_cmd = lpfc_get_scsi_buf(phba);
if (lpfc_cmd == NULL)
- goto out;
-
- lpfc_cmd->pCmd = cmnd;
+ return FAILED;
lpfc_cmd->timeout = 60;
- lpfc_cmd->scsi_hba = phba;
-
- ret = lpfc_scsi_prep_task_mgmt_cmd(phba, lpfc_cmd, FCP_LUN_RESET);
- if (!ret)
- goto out_free_scsi_buf;
+ lpfc_cmd->rdata = rdata;
+ status = lpfc_scsi_prep_task_mgmt_cmd(vport, lpfc_cmd,
+ cmnd->device->lun,
+ FCP_TARGET_RESET);
+ if (!status) {
+ lpfc_release_scsi_buf(phba, lpfc_cmd);
+ return FAILED;
+ }
iocbq = &lpfc_cmd->cur_iocbq;
/* get a buffer for this IOCB command response */
- list_remove_head(lpfc_iocb_list, iocbqrsp, struct lpfc_iocbq, list);
- if (iocbqrsp == NULL)
- goto out_free_scsi_buf;
-
- memset(iocbqrsp, 0, sizeof (struct lpfc_iocbq));
-
- iocbq->iocb_flag |= LPFC_IO_POLL;
- iocbq->iocb_cmpl = lpfc_sli_wake_iocb_high_priority;
-
- ret = lpfc_sli_issue_iocb_wait_high_priority(phba,
- &phba->sli.ring[psli->fcp_ring],
- iocbq, 0, iocbqrsp, 60);
- if (ret == IOCB_SUCCESS)
- ret = SUCCESS;
-
- lpfc_cmd->result = iocbqrsp->iocb.un.ulpWord[4];
- lpfc_cmd->status = iocbqrsp->iocb.ulpStatus;
- if (lpfc_cmd->status == IOSTAT_LOCAL_REJECT)
- if (lpfc_cmd->result & IOERR_DRVR_MASK)
- lpfc_cmd->status = IOSTAT_DRIVER_REJECT;
-
- /*
- * All outstanding txcmplq I/Os should have been aborted by the target.
- * Unfortunately, some targets do not abide by this forcing the driver
- * to double check.
- */
- lpfc_sli_abort_iocb(phba, &phba->sli.ring[phba->sli.fcp_ring],
- cmnd->device->id, cmnd->device->lun, 0,
- LPFC_CTX_LUN);
-
- loopcnt = 0;
- while((cnt = lpfc_sli_sum_iocb(phba,
- &phba->sli.ring[phba->sli.fcp_ring],
- cmnd->device->id, cmnd->device->lun,
- LPFC_CTX_LUN))) {
- spin_unlock_irq(phba->host->host_lock);
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout(LPFC_RESET_WAIT*HZ);
- spin_lock_irq(phba->host->host_lock);
-
- if (++loopcnt
- > (2 * phba->cfg_nodev_tmo)/LPFC_RESET_WAIT)
- break;
+ iocbqrsp = lpfc_sli_get_iocbq(phba);
+ if (iocbqrsp == NULL) {
+ lpfc_release_scsi_buf(phba, lpfc_cmd);
+ return FAILED;
+ }
+ lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
+ "0703 Issue target reset to TGT %d LUN %d "
+ "rpi x%x nlp_flag x%x\n", cmnd->device->id,
+ cmnd->device->lun, pnode->nlp_rpi, pnode->nlp_flag);
+ status = lpfc_sli_issue_iocb_wait(phba,
+ &phba->sli.ring[phba->sli.fcp_ring],
+ iocbq, iocbqrsp, lpfc_cmd->timeout);
+ if (status == IOCB_TIMEDOUT) {
+ iocbq->iocb_cmpl = lpfc_tskmgmt_def_cmpl;
+ ret = TIMEOUT_ERROR;
+ } else {
+ if (status != IOCB_SUCCESS)
+ ret = FAILED;
+ lpfc_release_scsi_buf(phba, lpfc_cmd);
+ }
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
+ "0713 SCSI layer issued device reset (%d, %d) "
+ "return x%x status x%x result x%x\n",
+ cmnd->device->id, cmnd->device->lun, ret,
+ iocbqrsp->iocb.ulpStatus,
+ iocbqrsp->iocb.un.ulpWord[4]);
+ lpfc_sli_release_iocbq(phba, iocbqrsp);
+ cnt = lpfc_sli_sum_iocb(vport, cmnd->device->id, cmnd->device->lun,
+ LPFC_CTX_TGT);
+ if (cnt)
+ lpfc_sli_abort_iocb(vport, &phba->sli.ring[phba->sli.fcp_ring],
+ cmnd->device->id, cmnd->device->lun,
+ LPFC_CTX_TGT);
+ later = msecs_to_jiffies(2 * vport->cfg_devloss_tmo * 1000) + jiffies;
+ while (time_after(later, jiffies) && cnt) {
+ schedule_timeout_uninterruptible(msecs_to_jiffies(20));
+ cnt = lpfc_sli_sum_iocb(vport, cmnd->device->id,
+ cmnd->device->lun, LPFC_CTX_TGT);
}
-
if (cnt) {
- lpfc_printf_log(phba, KERN_INFO, LOG_FCP,
- "%d:0719 LUN Reset I/O flush failure: cnt x%x\n",
- phba->brd_no, cnt);
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
+ "0719 device reset I/O flush failure: "
+ "cnt x%x\n", cnt);
+ ret = FAILED;
}
-
- list_add_tail(&iocbqrsp->list, lpfc_iocb_list);
-
-out_free_scsi_buf:
- lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
- "%d:0713 SCSI layer issued LUN reset (%d, %d) "
- "Data: x%x x%x x%x\n",
- phba->brd_no, lpfc_cmd->pCmd->device->id,
- lpfc_cmd->pCmd->device->lun, ret, lpfc_cmd->status,
- lpfc_cmd->result);
- lpfc_free_scsi_buf(lpfc_cmd);
-out:
return ret;
}
+/**
+ * lpfc_bus_reset_handler: eh_bus_reset_handler entry point of Scsi Host
+ * Template data structure.
+ * @cmnd: Pointer to scsi_cmnd data structure.
+ *
+ * This routine does target reset to all target on @cmnd->device->host.
+ *
+ * Return Code:
+ * 0x2003 - Error
+ * 0x2002 - Success
+ **/
static int
-lpfc_reset_lun_handler(struct scsi_cmnd *cmnd)
-{
- int rc;
- spin_lock_irq(cmnd->device->host->host_lock);
- rc = __lpfc_reset_lun_handler(cmnd);
- spin_unlock_irq(cmnd->device->host->host_lock);
- return rc;
-}
-
-/*
- * Note: midlayer calls this function with the host_lock held
- */
-static int
-__lpfc_reset_bus_handler(struct scsi_cmnd *cmnd)
+lpfc_bus_reset_handler(struct scsi_cmnd *cmnd)
{
- struct Scsi_Host *shost = cmnd->device->host;
- struct lpfc_hba *phba = (struct lpfc_hba *)shost->hostdata[0];
+ struct Scsi_Host *shost = cmnd->device->host;
+ struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+ struct lpfc_hba *phba = vport->phba;
struct lpfc_nodelist *ndlp = NULL;
int match;
- int ret = FAILED, i, err_count = 0;
- int cnt, loopcnt;
- unsigned int midlayer_id = 0;
- struct lpfc_scsi_buf * lpfc_cmd = NULL;
- struct list_head *scsi_buf_list = &phba->lpfc_scsi_buf_list;
-
- list_remove_head(scsi_buf_list, lpfc_cmd, struct lpfc_scsi_buf, list);
- if (lpfc_cmd == NULL)
- goto out;
-
- /* The lpfc_cmd storage is reused. Set all loop invariants. */
- lpfc_cmd->timeout = 60;
- lpfc_cmd->pCmd = cmnd;
- lpfc_cmd->scsi_hba = phba;
-
+ int ret = SUCCESS, status = SUCCESS, i;
+ int cnt;
+ struct lpfc_scsi_buf * lpfc_cmd;
+ unsigned long later;
+ struct lpfc_scsi_event_header scsi_event;
+
+ scsi_event.event_type = FC_REG_SCSI_EVENT;
+ scsi_event.subcategory = LPFC_EVENT_BUSRESET;
+ scsi_event.lun = 0;
+ memcpy(scsi_event.wwpn, &vport->fc_portname, sizeof(struct lpfc_name));
+ memcpy(scsi_event.wwnn, &vport->fc_nodename, sizeof(struct lpfc_name));
+
+ fc_host_post_vendor_event(shost,
+ fc_get_event_number(),
+ sizeof(scsi_event),
+ (char *)&scsi_event,
+ LPFC_NL_VENDOR_ID);
+
+ lpfc_block_error_handler(cmnd);
/*
* Since the driver manages a single bus device, reset all
* targets known to the driver. Should any target reset
* fail, this routine returns failure to the midlayer.
*/
- midlayer_id = cmnd->device->id;
- for (i = 0; i < MAX_FCP_TARGET; i++) {
- /* Search the mapped list for this target ID */
+ for (i = 0; i < LPFC_MAX_TARGET; i++) {
+ /* Search for mapped node by target ID */
match = 0;
- list_for_each_entry(ndlp, &phba->fc_nlpmap_list, nlp_listp) {
- if ((i == ndlp->nlp_sid) && ndlp->rport) {
+ spin_lock_irq(shost->host_lock);
+ list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) {
+ if (!NLP_CHK_NODE_ACT(ndlp))
+ continue;
+ if (ndlp->nlp_state == NLP_STE_MAPPED_NODE &&
+ ndlp->nlp_sid == i &&
+ ndlp->rport) {
match = 1;
break;
}
}
+ spin_unlock_irq(shost->host_lock);
if (!match)
continue;
-
- lpfc_cmd->pCmd->device->id = i;
- lpfc_cmd->pCmd->device->hostdata = ndlp->rport->dd_data;
- ret = lpfc_scsi_tgt_reset(lpfc_cmd, phba);
- if (ret != SUCCESS) {
- lpfc_printf_log(phba, KERN_INFO, LOG_FCP,
- "%d:0713 Bus Reset on target %d failed\n",
- phba->brd_no, i);
- err_count++;
+ lpfc_cmd = lpfc_get_scsi_buf(phba);
+ if (lpfc_cmd) {
+ lpfc_cmd->timeout = 60;
+ status = lpfc_scsi_tgt_reset(lpfc_cmd, vport, i,
+ cmnd->device->lun,
+ ndlp->rport->dd_data);
+ if (status != TIMEOUT_ERROR)
+ lpfc_release_scsi_buf(phba, lpfc_cmd);
+ }
+ if (!lpfc_cmd || status != SUCCESS) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
+ "0700 Bus Reset on target %d failed\n",
+ i);
+ ret = FAILED;
}
}
-
- cmnd->device->id = midlayer_id;
- loopcnt = 0;
- while((cnt = lpfc_sli_sum_iocb(phba,
- &phba->sli.ring[phba->sli.fcp_ring],
- 0, 0, LPFC_CTX_HOST))) {
- spin_unlock_irq(phba->host->host_lock);
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout(LPFC_RESET_WAIT*HZ);
- spin_lock_irq(phba->host->host_lock);
-
- if (++loopcnt
- > (2 * phba->cfg_nodev_tmo)/LPFC_RESET_WAIT)
- break;
+ /*
+ * All outstanding txcmplq I/Os should have been aborted by
+ * the targets. Unfortunately, some targets do not abide by
+ * this forcing the driver to double check.
+ */
+ cnt = lpfc_sli_sum_iocb(vport, 0, 0, LPFC_CTX_HOST);
+ if (cnt)
+ lpfc_sli_abort_iocb(vport, &phba->sli.ring[phba->sli.fcp_ring],
+ 0, 0, LPFC_CTX_HOST);
+ later = msecs_to_jiffies(2 * vport->cfg_devloss_tmo * 1000) + jiffies;
+ while (time_after(later, jiffies) && cnt) {
+ schedule_timeout_uninterruptible(msecs_to_jiffies(20));
+ cnt = lpfc_sli_sum_iocb(vport, 0, 0, LPFC_CTX_HOST);
}
-
if (cnt) {
- /* flush all outstanding commands on the host */
- i = lpfc_sli_abort_iocb(phba,
- &phba->sli.ring[phba->sli.fcp_ring], 0, 0, 0,
- LPFC_CTX_HOST);
-
- lpfc_printf_log(phba, KERN_INFO, LOG_FCP,
- "%d:0715 Bus Reset I/O flush failure: cnt x%x left x%x\n",
- phba->brd_no, cnt, i);
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
+ "0715 Bus Reset I/O flush failure: "
+ "cnt x%x left x%x\n", cnt, i);
+ ret = FAILED;
}
-
- if (!err_count)
- ret = SUCCESS;
-
- lpfc_free_scsi_buf(lpfc_cmd);
- lpfc_printf_log(phba,
- KERN_ERR,
- LOG_FCP,
- "%d:0714 SCSI layer issued Bus Reset Data: x%x\n",
- phba->brd_no, ret);
-out:
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
+ "0714 SCSI layer issued Bus Reset Data: x%x\n", ret);
return ret;
}
-static int
-lpfc_reset_bus_handler(struct scsi_cmnd *cmnd)
-{
- int rc;
- spin_lock_irq(cmnd->device->host->host_lock);
- rc = __lpfc_reset_bus_handler(cmnd);
- spin_unlock_irq(cmnd->device->host->host_lock);
- return rc;
-}
-
+/**
+ * lpfc_slave_alloc: slave_alloc entry point of Scsi Host Template data
+ * structure.
+ * @sdev: Pointer to scsi_device.
+ *
+ * This routine populates the cmds_per_lun count + 2 scsi_bufs into this host's
+ * globally available list of scsi buffers. This routine also makes sure scsi
+ * buffer is not allocated more than HBA limit conveyed to midlayer. This list
+ * of scsi buffer exists for the lifetime of the driver.
+ *
+ * Return codes:
+ * non-0 - Error
+ * 0 - Success
+ **/
static int
lpfc_slave_alloc(struct scsi_device *sdev)
{
- struct lpfc_hba *phba = (struct lpfc_hba *)sdev->host->hostdata[0];
- struct lpfc_nodelist *ndlp = NULL;
- int match = 0;
+ struct lpfc_vport *vport = (struct lpfc_vport *) sdev->host->hostdata;
+ struct lpfc_hba *phba = vport->phba;
struct lpfc_scsi_buf *scsi_buf = NULL;
+ struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
uint32_t total = 0, i;
uint32_t num_to_alloc = 0;
unsigned long flags;
- struct list_head *listp;
- struct list_head *node_list[6];
-
- /*
- * Store the target pointer in the scsi_device hostdata pointer provided
- * the driver has already discovered the target id.
- */
-
- /* Search the nlp lists other than unmap_list for this target ID */
- node_list[0] = &phba->fc_npr_list;
- node_list[1] = &phba->fc_nlpmap_list;
- node_list[2] = &phba->fc_prli_list;
- node_list[3] = &phba->fc_reglogin_list;
- node_list[4] = &phba->fc_adisc_list;
- node_list[5] = &phba->fc_plogi_list;
-
- for (i = 0; i < 6 && !match; i++) {
- listp = node_list[i];
- if (list_empty(listp))
- continue;
- list_for_each_entry(ndlp, listp, nlp_listp) {
- if ((sdev->id == ndlp->nlp_sid) && ndlp->rport) {
- match = 1;
- break;
- }
- }
- }
- if (!match)
+ if (!rport || fc_remote_port_chkready(rport))
return -ENXIO;
- sdev->hostdata = ndlp->rport->dd_data;
+ sdev->hostdata = rport->dd_data;
/*
* Populate the cmds_per_lun count scsi_bufs into this host's globally
* available list of scsi buffers. Don't allocate more than the
- * HBA limit conveyed to the midlayer via the host structure. Note
- * that this list of scsi bufs exists for the lifetime of the driver.
+ * HBA limit conveyed to the midlayer via the host structure. The
+ * formula accounts for the lun_queue_depth + error handlers + 1
+ * extra. This list of scsi bufs exists for the lifetime of the driver.
*/
total = phba->total_scsi_bufs;
- num_to_alloc = LPFC_CMD_PER_LUN;
- if (total >= phba->cfg_hba_queue_depth) {
- printk(KERN_WARNING "%s, At config limitation of "
- "%d allocated scsi_bufs\n", __FUNCTION__, total);
+ num_to_alloc = vport->cfg_lun_queue_depth + 2;
+
+ /* Allow some exchanges to be available always to complete discovery */
+ if (total >= phba->cfg_hba_queue_depth - LPFC_DISC_IOCB_BUFF_COUNT ) {
+ lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
+ "0704 At limitation of %d preallocated "
+ "command buffers\n", total);
return 0;
- } else if (total + num_to_alloc > phba->cfg_hba_queue_depth) {
+ /* Allow some exchanges to be available always to complete discovery */
+ } else if (total + num_to_alloc >
+ phba->cfg_hba_queue_depth - LPFC_DISC_IOCB_BUFF_COUNT ) {
+ lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
+ "0705 Allocation request of %d "
+ "command buffers will exceed max of %d. "
+ "Reducing allocation request to %d.\n",
+ num_to_alloc, phba->cfg_hba_queue_depth,
+ (phba->cfg_hba_queue_depth - total));
num_to_alloc = phba->cfg_hba_queue_depth - total;
}
for (i = 0; i < num_to_alloc; i++) {
- scsi_buf = lpfc_get_scsi_buf(phba);
+ scsi_buf = lpfc_new_scsi_buf(vport);
if (!scsi_buf) {
- printk(KERN_ERR "%s, failed to allocate "
- "scsi_buf\n", __FUNCTION__);
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
+ "0706 Failed to allocate "
+ "command buffer\n");
break;
}
- spin_lock_irqsave(phba->host->host_lock, flags);
+ spin_lock_irqsave(&phba->scsi_buf_list_lock, flags);
phba->total_scsi_bufs++;
list_add_tail(&scsi_buf->list, &phba->lpfc_scsi_buf_list);
- spin_unlock_irqrestore(phba->host->host_lock, flags);
+ spin_unlock_irqrestore(&phba->scsi_buf_list_lock, flags);
}
return 0;
}
+/**
+ * lpfc_slave_configure: slave_configure entry point of Scsi Host Templater data
+ * structure.
+ * @sdev: Pointer to scsi_device.
+ *
+ * This routine configures following items
+ * - Tag command queuing support for @sdev if supported.
+ * - Dev loss time out value of fc_rport.
+ * - Enable SLI polling for fcp ring if ENABLE_FCP_RING_POLLING flag is set.
+ *
+ * Return codes:
+ * 0 - Success
+ **/
static int
lpfc_slave_configure(struct scsi_device *sdev)
{
- struct lpfc_hba *phba = (struct lpfc_hba *) sdev->host->hostdata[0];
- struct fc_rport *rport = starget_to_rport(sdev->sdev_target);
+ struct lpfc_vport *vport = (struct lpfc_vport *) sdev->host->hostdata;
+ struct lpfc_hba *phba = vport->phba;
+ struct fc_rport *rport = starget_to_rport(sdev->sdev_target);
if (sdev->tagged_supported)
- scsi_activate_tcq(sdev, phba->cfg_lun_queue_depth);
+ scsi_activate_tcq(sdev, vport->cfg_lun_queue_depth);
else
- scsi_deactivate_tcq(sdev, phba->cfg_lun_queue_depth);
+ scsi_deactivate_tcq(sdev, vport->cfg_lun_queue_depth);
/*
* Initialize the fc transport attributes for the target
* target pointer is stored in the starget_data for the
* driver's sysfs entry point functions.
*/
- rport->dev_loss_tmo = phba->cfg_nodev_tmo + 5;
+ rport->dev_loss_tmo = vport->cfg_devloss_tmo;
+
+ if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) {
+ lpfc_sli_poll_fcp_ring(phba);
+ if (phba->cfg_poll & DISABLE_FCP_RING_INT)
+ lpfc_poll_rearm_timer(phba);
+ }
return 0;
}
+/**
+ * lpfc_slave_destroy: slave_destroy entry point of SHT data structure.
+ * @sdev: Pointer to scsi_device.
+ *
+ * This routine sets @sdev hostatdata filed to null.
+ **/
static void
lpfc_slave_destroy(struct scsi_device *sdev)
{
return;
}
+
struct scsi_host_template lpfc_template = {
.module = THIS_MODULE,
.name = LPFC_DRIVER_NAME,
.info = lpfc_info,
.queuecommand = lpfc_queuecommand,
.eh_abort_handler = lpfc_abort_handler,
- .eh_device_reset_handler= lpfc_reset_lun_handler,
- .eh_bus_reset_handler = lpfc_reset_bus_handler,
+ .eh_device_reset_handler= lpfc_device_reset_handler,
+ .eh_bus_reset_handler = lpfc_bus_reset_handler,
+ .slave_alloc = lpfc_slave_alloc,
+ .slave_configure = lpfc_slave_configure,
+ .slave_destroy = lpfc_slave_destroy,
+ .scan_finished = lpfc_scan_finished,
+ .this_id = -1,
+ .sg_tablesize = LPFC_DEFAULT_SG_SEG_CNT,
+ .cmd_per_lun = LPFC_CMD_PER_LUN,
+ .use_clustering = ENABLE_CLUSTERING,
+ .shost_attrs = lpfc_hba_attrs,
+ .max_sectors = 0xFFFF,
+};
+
+struct scsi_host_template lpfc_vport_template = {
+ .module = THIS_MODULE,
+ .name = LPFC_DRIVER_NAME,
+ .info = lpfc_info,
+ .queuecommand = lpfc_queuecommand,
+ .eh_abort_handler = lpfc_abort_handler,
+ .eh_device_reset_handler= lpfc_device_reset_handler,
+ .eh_bus_reset_handler = lpfc_bus_reset_handler,
.slave_alloc = lpfc_slave_alloc,
.slave_configure = lpfc_slave_configure,
.slave_destroy = lpfc_slave_destroy,
+ .scan_finished = lpfc_scan_finished,
.this_id = -1,
- .sg_tablesize = LPFC_SG_SEG_CNT,
+ .sg_tablesize = LPFC_DEFAULT_SG_SEG_CNT,
.cmd_per_lun = LPFC_CMD_PER_LUN,
.use_clustering = ENABLE_CLUSTERING,
- .shost_attrs = lpfc_host_attrs,
+ .shost_attrs = lpfc_vport_attrs,
.max_sectors = 0xFFFF,
};