#include <linux/pci.h>
#include <linux/spinlock.h>
#include <linux/ctype.h>
+#include <linux/aer.h>
#include <scsi/scsi.h>
#include <scsi/scsi_device.h>
goto out_free_mbox;
do {
- lpfc_dump_mem(phba, pmb, offset);
+ lpfc_dump_mem(phba, pmb, offset, DMP_REGION_VPD);
rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
if (rc != MBX_SUCCESS) {
return -EIO;
}
+ /* Check if the port is disabled */
+ lpfc_sli_read_link_ste(phba);
+
/* Reset the DFT_HBA_Q_DEPTH to the max xri */
if (phba->cfg_hba_queue_depth > (mb->un.varRdConfig.max_xri+1))
phba->cfg_hba_queue_depth =
/* Set up error attention (ERATT) polling timer */
mod_timer(&phba->eratt_poll, jiffies + HZ * LPFC_ERATT_POLL_INTERVAL);
- lpfc_init_link(phba, pmb, phba->cfg_topology, phba->cfg_link_speed);
- pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
- lpfc_set_loopback_flag(phba);
- rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
- if (rc != MBX_SUCCESS) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ if (phba->hba_flag & LINK_DISABLED) {
+ lpfc_printf_log(phba,
+ KERN_ERR, LOG_INIT,
+ "2598 Adapter Link is disabled.\n");
+ lpfc_down_link(phba, pmb);
+ pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+ rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
+ if ((rc != MBX_SUCCESS) && (rc != MBX_BUSY)) {
+ lpfc_printf_log(phba,
+ KERN_ERR, LOG_INIT,
+ "2599 Adapter failed to issue DOWN_LINK"
+ " mbox command rc 0x%x\n", rc);
+
+ mempool_free(pmb, phba->mbox_mem_pool);
+ return -EIO;
+ }
+ } else {
+ lpfc_init_link(phba, pmb, phba->cfg_topology,
+ phba->cfg_link_speed);
+ pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+ lpfc_set_loopback_flag(phba);
+ rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
+ if (rc != MBX_SUCCESS) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0454 Adapter failed to init, mbxCmd x%x "
"INIT_LINK, mbxStatus x%x\n",
mb->mbxCommand, mb->mbxStatus);
- /* Clear all interrupt enable conditions */
- writel(0, phba->HCregaddr);
- readl(phba->HCregaddr); /* flush */
- /* Clear all pending interrupts */
- writel(0xffffffff, phba->HAregaddr);
- readl(phba->HAregaddr); /* flush */
+ /* Clear all interrupt enable conditions */
+ writel(0, phba->HCregaddr);
+ readl(phba->HCregaddr); /* flush */
+ /* Clear all pending interrupts */
+ writel(0xffffffff, phba->HAregaddr);
+ readl(phba->HAregaddr); /* flush */
- phba->link_state = LPFC_HBA_ERROR;
- if (rc != MBX_BUSY)
- mempool_free(pmb, phba->mbox_mem_pool);
- return -EIO;
+ phba->link_state = LPFC_HBA_ERROR;
+ if (rc != MBX_BUSY)
+ mempool_free(pmb, phba->mbox_mem_pool);
+ return -EIO;
+ }
}
/* MBOX buffer will be freed in mbox compl */
pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
KERN_ERR,
LOG_INIT,
"0456 Adapter failed to issue "
- "ASYNCEVT_ENABLE mbox status x%x \n.",
+ "ASYNCEVT_ENABLE mbox status x%x\n",
rc);
mempool_free(pmb, phba->mbox_mem_pool);
}
if ((rc != MBX_BUSY) && (rc != MBX_SUCCESS)) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0435 Adapter failed "
- "to get Option ROM version status x%x\n.", rc);
+ "to get Option ROM version status x%x\n", rc);
mempool_free(pmb, phba->mbox_mem_pool);
}
* down the SLI Layer.
*
* Return codes
- * 0 - sucess.
+ * 0 - success.
* Any other value - error.
**/
static int
* down the SLI Layer.
*
* Return codes
- * 0 - sucess.
+ * 0 - success.
* Any other value - error.
**/
static int
* uninitialization after the HBA is reset when bring down the SLI Layer.
*
* Return codes
- * 0 - sucess.
+ * 0 - success.
* Any other value - error.
**/
int
void
lpfc_hb_timeout_handler(struct lpfc_hba *phba)
{
+ struct lpfc_vport **vports;
LPFC_MBOXQ_t *pmboxq;
struct lpfc_dmabuf *buf_ptr;
- int retval;
+ int retval, i;
struct lpfc_sli *psli = &phba->sli;
LIST_HEAD(completions);
+ vports = lpfc_create_vport_work_array(phba);
+ if (vports != NULL)
+ for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++)
+ lpfc_rcv_seq_check_edtov(vports[i]);
+ lpfc_destroy_vport_work_array(phba, vports);
+
if ((phba->link_state == LPFC_HBA_ERROR) ||
(phba->pport->load_flag & FC_UNLOADING) ||
(phba->pport->fc_flag & FC_OFFLINE_MODE))
* routine from the API jump table function pointer from the lpfc_hba struct.
*
* Return codes
- * 0 - sucess.
+ * 0 - success.
* Any other value - error.
**/
void
int GE = 0;
int oneConnect = 0; /* default is not a oneConnect */
struct {
- char * name;
- int max_speed;
- char * bus;
- } m = {"<Unknown>", 0, ""};
+ char *name;
+ char *bus;
+ char *function;
+ } m = {"<Unknown>", "", ""};
if (mdp && mdp[0] != '\0'
&& descp && descp[0] != '\0')
switch (dev_id) {
case PCI_DEVICE_ID_FIREFLY:
- m = (typeof(m)){"LP6000", max_speed, "PCI"};
+ m = (typeof(m)){"LP6000", "PCI", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_SUPERFLY:
if (vp->rev.biuRev >= 1 && vp->rev.biuRev <= 3)
- m = (typeof(m)){"LP7000", max_speed, "PCI"};
+ m = (typeof(m)){"LP7000", "PCI",
+ "Fibre Channel Adapter"};
else
- m = (typeof(m)){"LP7000E", max_speed, "PCI"};
+ m = (typeof(m)){"LP7000E", "PCI",
+ "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_DRAGONFLY:
- m = (typeof(m)){"LP8000", max_speed, "PCI"};
+ m = (typeof(m)){"LP8000", "PCI",
+ "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_CENTAUR:
if (FC_JEDEC_ID(vp->rev.biuRev) == CENTAUR_2G_JEDEC_ID)
- m = (typeof(m)){"LP9002", max_speed, "PCI"};
+ m = (typeof(m)){"LP9002", "PCI",
+ "Fibre Channel Adapter"};
else
- m = (typeof(m)){"LP9000", max_speed, "PCI"};
+ m = (typeof(m)){"LP9000", "PCI",
+ "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_RFLY:
- m = (typeof(m)){"LP952", max_speed, "PCI"};
+ m = (typeof(m)){"LP952", "PCI",
+ "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_PEGASUS:
- m = (typeof(m)){"LP9802", max_speed, "PCI-X"};
+ m = (typeof(m)){"LP9802", "PCI-X",
+ "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_THOR:
- m = (typeof(m)){"LP10000", max_speed, "PCI-X"};
+ m = (typeof(m)){"LP10000", "PCI-X",
+ "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_VIPER:
- m = (typeof(m)){"LPX1000", max_speed, "PCI-X"};
+ m = (typeof(m)){"LPX1000", "PCI-X",
+ "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_PFLY:
- m = (typeof(m)){"LP982", max_speed, "PCI-X"};
+ m = (typeof(m)){"LP982", "PCI-X",
+ "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_TFLY:
- m = (typeof(m)){"LP1050", max_speed, "PCI-X"};
+ m = (typeof(m)){"LP1050", "PCI-X",
+ "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_HELIOS:
- m = (typeof(m)){"LP11000", max_speed, "PCI-X2"};
+ m = (typeof(m)){"LP11000", "PCI-X2",
+ "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_HELIOS_SCSP:
- m = (typeof(m)){"LP11000-SP", max_speed, "PCI-X2"};
+ m = (typeof(m)){"LP11000-SP", "PCI-X2",
+ "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_HELIOS_DCSP:
- m = (typeof(m)){"LP11002-SP", max_speed, "PCI-X2"};
+ m = (typeof(m)){"LP11002-SP", "PCI-X2",
+ "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_NEPTUNE:
- m = (typeof(m)){"LPe1000", max_speed, "PCIe"};
+ m = (typeof(m)){"LPe1000", "PCIe", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_NEPTUNE_SCSP:
- m = (typeof(m)){"LPe1000-SP", max_speed, "PCIe"};
+ m = (typeof(m)){"LPe1000-SP", "PCIe", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_NEPTUNE_DCSP:
- m = (typeof(m)){"LPe1002-SP", max_speed, "PCIe"};
+ m = (typeof(m)){"LPe1002-SP", "PCIe", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_BMID:
- m = (typeof(m)){"LP1150", max_speed, "PCI-X2"};
+ m = (typeof(m)){"LP1150", "PCI-X2", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_BSMB:
- m = (typeof(m)){"LP111", max_speed, "PCI-X2"};
+ m = (typeof(m)){"LP111", "PCI-X2", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_ZEPHYR:
- m = (typeof(m)){"LPe11000", max_speed, "PCIe"};
+ m = (typeof(m)){"LPe11000", "PCIe", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_ZEPHYR_SCSP:
- m = (typeof(m)){"LPe11000", max_speed, "PCIe"};
+ m = (typeof(m)){"LPe11000", "PCIe", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_ZEPHYR_DCSP:
- m = (typeof(m)){"LP2105", max_speed, "PCIe"};
+ m = (typeof(m)){"LP2105", "PCIe", "FCoE Adapter"};
GE = 1;
break;
case PCI_DEVICE_ID_ZMID:
- m = (typeof(m)){"LPe1150", max_speed, "PCIe"};
+ m = (typeof(m)){"LPe1150", "PCIe", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_ZSMB:
- m = (typeof(m)){"LPe111", max_speed, "PCIe"};
+ m = (typeof(m)){"LPe111", "PCIe", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_LP101:
- m = (typeof(m)){"LP101", max_speed, "PCI-X"};
+ m = (typeof(m)){"LP101", "PCI-X", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_LP10000S:
- m = (typeof(m)){"LP10000-S", max_speed, "PCI"};
+ m = (typeof(m)){"LP10000-S", "PCI", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_LP11000S:
- m = (typeof(m)){"LP11000-S", max_speed,
- "PCI-X2"};
+ m = (typeof(m)){"LP11000-S", "PCI-X2", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_LPE11000S:
- m = (typeof(m)){"LPe11000-S", max_speed,
- "PCIe"};
+ m = (typeof(m)){"LPe11000-S", "PCIe", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_SAT:
- m = (typeof(m)){"LPe12000", max_speed, "PCIe"};
+ m = (typeof(m)){"LPe12000", "PCIe", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_SAT_MID:
- m = (typeof(m)){"LPe1250", max_speed, "PCIe"};
+ m = (typeof(m)){"LPe1250", "PCIe", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_SAT_SMB:
- m = (typeof(m)){"LPe121", max_speed, "PCIe"};
+ m = (typeof(m)){"LPe121", "PCIe", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_SAT_DCSP:
- m = (typeof(m)){"LPe12002-SP", max_speed, "PCIe"};
+ m = (typeof(m)){"LPe12002-SP", "PCIe", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_SAT_SCSP:
- m = (typeof(m)){"LPe12000-SP", max_speed, "PCIe"};
+ m = (typeof(m)){"LPe12000-SP", "PCIe", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_SAT_S:
- m = (typeof(m)){"LPe12000-S", max_speed, "PCIe"};
+ m = (typeof(m)){"LPe12000-S", "PCIe", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_HORNET:
- m = (typeof(m)){"LP21000", max_speed, "PCIe"};
+ m = (typeof(m)){"LP21000", "PCIe", "FCoE Adapter"};
GE = 1;
break;
case PCI_DEVICE_ID_PROTEUS_VF:
- m = (typeof(m)) {"LPev12000", max_speed, "PCIe IOV"};
+ m = (typeof(m)){"LPev12000", "PCIe IOV",
+ "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_PROTEUS_PF:
- m = (typeof(m)) {"LPev12000", max_speed, "PCIe IOV"};
+ m = (typeof(m)){"LPev12000", "PCIe IOV",
+ "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_PROTEUS_S:
- m = (typeof(m)) {"LPemv12002-S", max_speed, "PCIe IOV"};
+ m = (typeof(m)){"LPemv12002-S", "PCIe IOV",
+ "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_TIGERSHARK:
oneConnect = 1;
- m = (typeof(m)) {"OCe10100-F", max_speed, "PCIe"};
+ m = (typeof(m)){"OCe10100", "PCIe", "FCoE"};
+ break;
+ case PCI_DEVICE_ID_TOMCAT:
+ oneConnect = 1;
+ m = (typeof(m)){"OCe11100", "PCIe", "FCoE"};
+ break;
+ case PCI_DEVICE_ID_FALCON:
+ m = (typeof(m)){"LPSe12002-ML1-E", "PCIe",
+ "EmulexSecure Fibre"};
break;
default:
- m = (typeof(m)){ NULL };
+ m = (typeof(m)){"Unknown", "", ""};
break;
}
if (descp && descp[0] == '\0') {
if (oneConnect)
snprintf(descp, 255,
- "Emulex OneConnect %s, FCoE Initiator, Port %s",
- m.name,
+ "Emulex OneConnect %s, %s Initiator, Port %s",
+ m.name, m.function,
phba->Port);
else
snprintf(descp, 255,
"Emulex %s %d%s %s %s",
- m.name, m.max_speed,
- (GE) ? "GE" : "Gb",
- m.bus,
- (GE) ? "FCoE Adapter" :
- "Fibre Channel Adapter");
+ m.name, max_speed, (GE) ? "GE" : "Gb",
+ m.bus, m.function);
}
}
vports[i]->fc_flag &= ~FC_OFFLINE_MODE;
if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)
vports[i]->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ vports[i]->fc_flag |= FC_VPORT_NEEDS_INIT_VPI;
spin_unlock_irq(shost->host_lock);
}
lpfc_destroy_vport_work_array(phba, vports);
if (vports[i]->load_flag & FC_UNLOADING)
continue;
- vports[i]->vfi_state &= ~LPFC_VFI_REGISTERED;
+ vports[i]->vpi_state &= ~LPFC_VPI_REGISTERED;
shost = lpfc_shost_from_vport(vports[i]);
list_for_each_entry_safe(ndlp, next_ndlp,
&vports[i]->fc_nodes,
spin_lock_irq(&phba->hbalock);
/* Release all the lpfc_scsi_bufs maintained by this host. */
+ spin_lock(&phba->scsi_buf_list_lock);
list_for_each_entry_safe(sb, sb_next, &phba->lpfc_scsi_buf_list, list) {
list_del(&sb->list);
pci_pool_free(phba->lpfc_scsi_dma_buf_pool, sb->data,
kfree(sb);
phba->total_scsi_bufs--;
}
+ spin_unlock(&phba->scsi_buf_list_lock);
/* Release all the lpfc_iocbq entries maintained by this host. */
list_for_each_entry_safe(io, io_next, &phba->lpfc_iocb_list, list) {
kfree(io);
phba->total_iocbq_bufs--;
}
-
spin_unlock_irq(&phba->hbalock);
-
return 0;
}
vport->els_tmofunc.function = lpfc_els_timeout;
vport->els_tmofunc.data = (unsigned long)vport;
- error = scsi_add_host(shost, dev);
+ error = scsi_add_host_with_dma(shost, dev, &phba->pcidev->dev);
if (error)
goto out_put_shost;
}
/**
+ * lpfc_sli4_fw_cfg_check - Read the firmware config and verify FCoE support
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This function uses the QUERY_FW_CFG mailbox command to determine if the
+ * firmware loaded supports FCoE. A return of zero indicates that the mailbox
+ * was successful and the firmware supports FCoE. Any other return indicates
+ * a error. It is assumed that this function will be called before interrupts
+ * are enabled.
+ **/
+static int
+lpfc_sli4_fw_cfg_check(struct lpfc_hba *phba)
+{
+ int rc = 0;
+ LPFC_MBOXQ_t *mboxq;
+ struct lpfc_mbx_query_fw_cfg *query_fw_cfg;
+ uint32_t length;
+ uint32_t shdr_status, shdr_add_status;
+
+ mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mboxq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2621 Failed to allocate mbox for "
+ "query firmware config cmd\n");
+ return -ENOMEM;
+ }
+ query_fw_cfg = &mboxq->u.mqe.un.query_fw_cfg;
+ length = (sizeof(struct lpfc_mbx_query_fw_cfg) -
+ sizeof(struct lpfc_sli4_cfg_mhdr));
+ lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
+ LPFC_MBOX_OPCODE_QUERY_FW_CFG,
+ length, LPFC_SLI4_MBX_EMBED);
+ rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+ /* The IOCTL status is embedded in the mailbox subheader. */
+ shdr_status = bf_get(lpfc_mbox_hdr_status,
+ &query_fw_cfg->header.cfg_shdr.response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status,
+ &query_fw_cfg->header.cfg_shdr.response);
+ if (shdr_status || shdr_add_status || rc != MBX_SUCCESS) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2622 Query Firmware Config failed "
+ "mbx status x%x, status x%x add_status x%x\n",
+ rc, shdr_status, shdr_add_status);
+ return -EINVAL;
+ }
+ if (!bf_get(lpfc_function_mode_fcoe_i, query_fw_cfg)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2623 FCoE Function not supported by firmware. "
+ "Function mode = %08x\n",
+ query_fw_cfg->function_mode);
+ return -EINVAL;
+ }
+ if (rc != MBX_TIMEOUT)
+ mempool_free(mboxq, phba->mbox_mem_pool);
+ return 0;
+}
+
+/**
* lpfc_sli4_parse_latt_fault - Parse sli4 link-attention link fault code
* @phba: pointer to lpfc hba data structure.
* @acqe_link: pointer to the async link completion queue entry.
att_type = lpfc_sli4_parse_latt_type(phba, acqe_link);
if (att_type != AT_LINK_DOWN && att_type != AT_LINK_UP)
return;
+ phba->fcoe_eventtag = acqe_link->event_tag;
pmb = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!pmb) {
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
{
uint8_t event_type = bf_get(lpfc_acqe_fcoe_event_type, acqe_fcoe);
int rc;
+ struct lpfc_vport *vport;
+ struct lpfc_nodelist *ndlp;
+ struct Scsi_Host *shost;
+ uint32_t link_state;
+ phba->fc_eventTag = acqe_fcoe->event_tag;
+ phba->fcoe_eventtag = acqe_fcoe->event_tag;
switch (event_type) {
case LPFC_FCOE_EVENT_TYPE_NEW_FCF:
lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
- "2546 New FCF found index 0x%x tag 0x%x \n",
- acqe_fcoe->fcf_index,
+ "2546 New FCF found index 0x%x tag 0x%x\n",
+ acqe_fcoe->index,
acqe_fcoe->event_tag);
/*
- * If the current FCF is in discovered state,
- * do nothing.
+ * If the current FCF is in discovered state, or
+ * FCF discovery is in progress do nothing.
*/
spin_lock_irq(&phba->hbalock);
- if (phba->fcf.fcf_flag & FCF_DISCOVERED) {
+ if ((phba->fcf.fcf_flag & FCF_DISCOVERED) ||
+ (phba->hba_flag & FCF_DISC_INPROGRESS)) {
spin_unlock_irq(&phba->hbalock);
break;
}
spin_unlock_irq(&phba->hbalock);
/* Read the FCF table and re-discover SAN. */
- rc = lpfc_sli4_read_fcf_record(phba,
- LPFC_FCOE_FCF_GET_FIRST);
+ rc = lpfc_sli4_read_fcf_record(phba, LPFC_FCOE_FCF_GET_FIRST);
if (rc)
lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
- "2547 Read FCF record failed 0x%x\n",
- rc);
+ "2547 Read FCF record failed 0x%x\n",
+ rc);
break;
case LPFC_FCOE_EVENT_TYPE_FCF_TABLE_FULL:
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
- "2548 FCF Table full count 0x%x tag 0x%x \n",
+ "2548 FCF Table full count 0x%x tag 0x%x\n",
bf_get(lpfc_acqe_fcoe_fcf_count, acqe_fcoe),
acqe_fcoe->event_tag);
break;
case LPFC_FCOE_EVENT_TYPE_FCF_DEAD:
lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
- "2549 FCF disconnected fron network index 0x%x"
- " tag 0x%x \n", acqe_fcoe->fcf_index,
+ "2549 FCF disconnected from network index 0x%x"
+ " tag 0x%x\n", acqe_fcoe->index,
acqe_fcoe->event_tag);
/* If the event is not for currently used fcf do nothing */
- if (phba->fcf.fcf_indx != acqe_fcoe->fcf_index)
+ if (phba->fcf.fcf_indx != acqe_fcoe->index)
break;
/*
* Currently, driver support only one FCF - so treat this as
- * a link down.
+ * a link down, but save the link state because we don't want
+ * it to be changed to Link Down unless it is already down.
*/
+ link_state = phba->link_state;
lpfc_linkdown(phba);
+ phba->link_state = link_state;
/* Unregister FCF if no devices connected to it */
lpfc_unregister_unused_fcf(phba);
break;
-
+ case LPFC_FCOE_EVENT_TYPE_CVL:
+ lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
+ "2718 Clear Virtual Link Received for VPI 0x%x"
+ " tag 0x%x\n", acqe_fcoe->index, acqe_fcoe->event_tag);
+ vport = lpfc_find_vport_by_vpid(phba,
+ acqe_fcoe->index - phba->vpi_base);
+ if (!vport)
+ break;
+ ndlp = lpfc_findnode_did(vport, Fabric_DID);
+ if (!ndlp)
+ break;
+ shost = lpfc_shost_from_vport(vport);
+ lpfc_linkdown_port(vport);
+ if (vport->port_type != LPFC_NPIV_PORT) {
+ mod_timer(&ndlp->nlp_delayfunc, jiffies + HZ);
+ spin_lock_irq(shost->host_lock);
+ ndlp->nlp_flag |= NLP_DELAY_TMO;
+ spin_unlock_irq(shost->host_lock);
+ ndlp->nlp_last_elscmd = ELS_CMD_FLOGI;
+ vport->port_state = LPFC_FLOGI;
+ }
+ break;
default:
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"0288 Unknown FCoE event type 0x%x event tag "
lpfc_sli4_async_dcbx_evt(struct lpfc_hba *phba,
struct lpfc_acqe_dcbx *acqe_dcbx)
{
+ phba->fc_eventTag = acqe_dcbx->event_tag;
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"0290 The SLI4 DCBX asynchronous event is not "
"handled yet\n");
* PCI devices.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static int
* support the SLI-3 HBA device it attached to.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static int
* support the SLI-4 HBA device it attached to.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static int
/* Driver internel slow-path CQ Event pool */
INIT_LIST_HEAD(&phba->sli4_hba.sp_cqe_event_pool);
/* Response IOCB work queue list */
- INIT_LIST_HEAD(&phba->sli4_hba.sp_rspiocb_work_queue);
+ INIT_LIST_HEAD(&phba->sli4_hba.sp_queue_event);
/* Asynchronous event CQ Event work queue list */
INIT_LIST_HEAD(&phba->sli4_hba.sp_asynce_work_queue);
/* Fast-path XRI aborted CQ Event work queue list */
if (unlikely(rc))
goto out_free_bsmbx;
+ rc = lpfc_sli4_fw_cfg_check(phba);
+ if (unlikely(rc))
+ goto out_free_bsmbx;
+
/* Set up the hba's configuration parameters. */
rc = lpfc_sli4_read_config(phba);
if (unlikely(rc))
/* Free the current connect table */
list_for_each_entry_safe(conn_entry, next_conn_entry,
- &phba->fcf_conn_rec_list, list)
+ &phba->fcf_conn_rec_list, list) {
+ list_del_init(&conn_entry->list);
kfree(conn_entry);
+ }
return;
}
* device specific resource setup to support the HBA device it attached to.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static int
* device specific resource setup to support the HBA device it attached to.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static int
* list and set up the IOCB tag array accordingly.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static int
rc = lpfc_sli4_remove_all_sgl_pages(phba);
if (rc) {
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
- "2005 Unable to deregister pages from HBA: %x", rc);
+ "2005 Unable to deregister pages from HBA: %x\n", rc);
}
kfree(phba->sli4_hba.lpfc_els_sgl_array);
}
* list and set up the sgl xritag tag array accordingly.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static int
* enabled and the driver is reinitializing the device.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* ENOMEM - No availble memory
* EIO - The mailbox failed to complete successfully.
**/
* PCI device data structure is set.
*
* Return codes
- * pointer to @phba - sucessful
+ * pointer to @phba - successful
* NULL - error
**/
static struct lpfc_hba *
/* Allocate memory for HBA structure */
phba = kzalloc(sizeof(struct lpfc_hba), GFP_KERNEL);
if (!phba) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "1417 Failed to allocate hba struct.\n");
+ dev_err(&pdev->dev, "failed to allocate hba struct\n");
return NULL;
}
return NULL;
}
+ mutex_init(&phba->ct_event_mutex);
+ INIT_LIST_HEAD(&phba->ct_ev_waiters);
+
return phba;
}
* host with it.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static int
_dump_buf_data =
(char *) __get_free_pages(GFP_KERNEL, pagecnt);
if (_dump_buf_data) {
- printk(KERN_ERR "BLKGRD allocated %d pages for "
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+ "9043 BLKGRD: allocated %d pages for "
"_dump_buf_data at 0x%p\n",
(1 << pagecnt), _dump_buf_data);
_dump_buf_data_order = pagecnt;
--pagecnt;
}
if (!_dump_buf_data_order)
- printk(KERN_ERR "BLKGRD ERROR unable to allocate "
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+ "9044 BLKGRD: ERROR unable to allocate "
"memory for hexdump\n");
} else
- printk(KERN_ERR "BLKGRD already allocated _dump_buf_data=0x%p"
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+ "9045 BLKGRD: already allocated _dump_buf_data=0x%p"
"\n", _dump_buf_data);
if (!_dump_buf_dif) {
while (pagecnt) {
_dump_buf_dif =
(char *) __get_free_pages(GFP_KERNEL, pagecnt);
if (_dump_buf_dif) {
- printk(KERN_ERR "BLKGRD allocated %d pages for "
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+ "9046 BLKGRD: allocated %d pages for "
"_dump_buf_dif at 0x%p\n",
(1 << pagecnt), _dump_buf_dif);
_dump_buf_dif_order = pagecnt;
--pagecnt;
}
if (!_dump_buf_dif_order)
- printk(KERN_ERR "BLKGRD ERROR unable to allocate "
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+ "9047 BLKGRD: ERROR unable to allocate "
"memory for hexdump\n");
} else
- printk(KERN_ERR "BLKGRD already allocated _dump_buf_dif=0x%p\n",
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+ "9048 BLKGRD: already allocated _dump_buf_dif=0x%p\n",
_dump_buf_dif);
}
* with SLI-3 interface spec.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static int
pdev = phba->pcidev;
/* Set the device DMA mask size */
- if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0)
- if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0)
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0
+ || pci_set_consistent_dma_mask(pdev,DMA_BIT_MASK(64)) != 0) {
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0
+ || pci_set_consistent_dma_mask(pdev,DMA_BIT_MASK(32)) != 0) {
return error;
+ }
+ }
/* Get the bus address of Bar0 and Bar2 and the number of bytes
* required by each mapping.
lpfc_sli4_post_status_check(struct lpfc_hba *phba)
{
struct lpfc_register sta_reg, uerrlo_reg, uerrhi_reg, scratchpad;
- uint32_t onlnreg0, onlnreg1;
int i, port_error = -ENODEV;
if (!phba->sli4_hba.STAregaddr)
return -ENODEV;
- /* With uncoverable error, log the error message and return error */
- onlnreg0 = readl(phba->sli4_hba.ONLINE0regaddr);
- onlnreg1 = readl(phba->sli4_hba.ONLINE1regaddr);
- if ((onlnreg0 != LPFC_ONLINE_NERR) || (onlnreg1 != LPFC_ONLINE_NERR)) {
- uerrlo_reg.word0 = readl(phba->sli4_hba.UERRLOregaddr);
- uerrhi_reg.word0 = readl(phba->sli4_hba.UERRHIregaddr);
- if (uerrlo_reg.word0 || uerrhi_reg.word0) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "1422 HBA Unrecoverable error: "
- "uerr_lo_reg=0x%x, uerr_hi_reg=0x%x, "
- "online0_reg=0x%x, online1_reg=0x%x\n",
- uerrlo_reg.word0, uerrhi_reg.word0,
- onlnreg0, onlnreg1);
- }
- return -ENODEV;
- }
-
/* Wait up to 30 seconds for the SLI Port POST done and ready */
for (i = 0; i < 3000; i++) {
sta_reg.word0 = readl(phba->sli4_hba.STAregaddr);
bf_get(lpfc_scratchpad_slirev, &scratchpad),
bf_get(lpfc_scratchpad_featurelevel1, &scratchpad),
bf_get(lpfc_scratchpad_featurelevel2, &scratchpad));
+ phba->sli4_hba.ue_mask_lo = readl(phba->sli4_hba.UEMASKLOregaddr);
+ phba->sli4_hba.ue_mask_hi = readl(phba->sli4_hba.UEMASKHIregaddr);
+ /* With uncoverable error, log the error message and return error */
+ uerrlo_reg.word0 = readl(phba->sli4_hba.UERRLOregaddr);
+ uerrhi_reg.word0 = readl(phba->sli4_hba.UERRHIregaddr);
+ if ((~phba->sli4_hba.ue_mask_lo & uerrlo_reg.word0) ||
+ (~phba->sli4_hba.ue_mask_hi & uerrhi_reg.word0)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1422 HBA Unrecoverable error: "
+ "uerr_lo_reg=0x%x, uerr_hi_reg=0x%x, "
+ "ue_mask_lo_reg=0x%x, ue_mask_hi_reg=0x%x\n",
+ uerrlo_reg.word0, uerrhi_reg.word0,
+ phba->sli4_hba.ue_mask_lo,
+ phba->sli4_hba.ue_mask_hi);
+ return -ENODEV;
+ }
return port_error;
}
LPFC_UERR_STATUS_LO;
phba->sli4_hba.UERRHIregaddr = phba->sli4_hba.conf_regs_memmap_p +
LPFC_UERR_STATUS_HI;
- phba->sli4_hba.ONLINE0regaddr = phba->sli4_hba.conf_regs_memmap_p +
- LPFC_ONLINE0;
- phba->sli4_hba.ONLINE1regaddr = phba->sli4_hba.conf_regs_memmap_p +
- LPFC_ONLINE1;
+ phba->sli4_hba.UEMASKLOregaddr = phba->sli4_hba.conf_regs_memmap_p +
+ LPFC_UE_MASK_LO;
+ phba->sli4_hba.UEMASKHIregaddr = phba->sli4_hba.conf_regs_memmap_p +
+ LPFC_UE_MASK_HI;
phba->sli4_hba.SCRATCHPADregaddr = phba->sli4_hba.conf_regs_memmap_p +
LPFC_SCRATCHPAD;
}
* this routine.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* ENOMEM - could not allocated memory.
**/
static int
* allocation for the port.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* ENOMEM - No availble memory
* EIO - The mailbox failed to complete successfully.
**/
phba->vpi_base = phba->sli4_hba.max_cfg_param.vpi_base;
phba->vfi_base = phba->sli4_hba.max_cfg_param.vfi_base;
phba->sli4_hba.next_rpi = phba->sli4_hba.max_cfg_param.rpi_base;
- phba->max_vpi = phba->sli4_hba.max_cfg_param.max_vpi;
+ phba->max_vpi = (phba->sli4_hba.max_cfg_param.max_vpi > 0) ?
+ (phba->sli4_hba.max_cfg_param.max_vpi - 1) : 0;
phba->max_vports = phba->max_vpi;
lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
"2003 cfg params XRI(B:%d M:%d), "
* HBA consistent with the SLI-4 interface spec.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* ENOMEM - No availble memory
* EIO - The mailbox failed to complete successfully.
**/
* we just use some constant number as place holder.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* ENOMEM - No availble memory
* EIO - The mailbox failed to complete successfully.
**/
/* It does not make sense to have more EQs than WQs */
if (cfg_fcp_eq_count > phba->cfg_fcp_wq_count) {
lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
- "2593 The number of FCP EQs (%d) is more "
- "than the number of FCP WQs (%d), take "
- "the number of FCP EQs same as than of "
- "WQs (%d)\n", cfg_fcp_eq_count,
+ "2593 The FCP EQ count(%d) cannot be greater "
+ "than the FCP WQ count(%d), limiting the "
+ "FCP EQ count to %d\n", cfg_fcp_eq_count,
phba->cfg_fcp_wq_count,
phba->cfg_fcp_wq_count);
cfg_fcp_eq_count = phba->cfg_fcp_wq_count;
}
phba->sli4_hba.els_cq = qdesc;
- /* Create slow-path Unsolicited Receive Complete Queue */
- qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.cq_esize,
- phba->sli4_hba.cq_ecount);
- if (!qdesc) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "0502 Failed allocate slow-path USOL RX CQ\n");
- goto out_free_els_cq;
- }
- phba->sli4_hba.rxq_cq = qdesc;
/* Create fast-path FCP Completion Queue(s), one-to-one with EQs */
phba->sli4_hba.fcp_cq = kzalloc((sizeof(struct lpfc_queue *) *
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2577 Failed allocate memory for fast-path "
"CQ record array\n");
- goto out_free_rxq_cq;
+ goto out_free_els_cq;
}
for (fcp_cqidx = 0; fcp_cqidx < phba->cfg_fcp_eq_count; fcp_cqidx++) {
qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.cq_esize,
phba->sli4_hba.fcp_cq[fcp_cqidx] = NULL;
}
kfree(phba->sli4_hba.fcp_cq);
-out_free_rxq_cq:
- lpfc_sli4_queue_free(phba->sli4_hba.rxq_cq);
- phba->sli4_hba.rxq_cq = NULL;
out_free_els_cq:
lpfc_sli4_queue_free(phba->sli4_hba.els_cq);
phba->sli4_hba.els_cq = NULL;
* operation.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* ENOMEM - No availble memory
* EIO - The mailbox failed to complete successfully.
**/
lpfc_sli4_queue_free(phba->sli4_hba.dat_rq);
phba->sli4_hba.dat_rq = NULL;
- /* Release unsolicited receive complete queue */
- lpfc_sli4_queue_free(phba->sli4_hba.rxq_cq);
- phba->sli4_hba.rxq_cq = NULL;
-
/* Release ELS complete queue */
lpfc_sli4_queue_free(phba->sli4_hba.els_cq);
phba->sli4_hba.els_cq = NULL;
* operation.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* ENOMEM - No availble memory
* EIO - The mailbox failed to complete successfully.
**/
phba->sli4_hba.els_cq->queue_id,
phba->sli4_hba.sp_eq->queue_id);
- /* Set up slow-path Unsolicited Receive Complete Queue */
- if (!phba->sli4_hba.rxq_cq) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "0532 USOL RX CQ not allocated\n");
- goto out_destroy_els_cq;
- }
- rc = lpfc_cq_create(phba, phba->sli4_hba.rxq_cq, phba->sli4_hba.sp_eq,
- LPFC_RCQ, LPFC_USOL);
- if (rc) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "0533 Failed setup of slow-path USOL RX CQ: "
- "rc = 0x%x\n", rc);
- goto out_destroy_els_cq;
- }
- lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
- "2587 USL CQ setup: cq-id=%d, parent eq-id=%d\n",
- phba->sli4_hba.rxq_cq->queue_id,
- phba->sli4_hba.sp_eq->queue_id);
-
/* Set up fast-path FCP Response Complete Queue */
for (fcp_cqidx = 0; fcp_cqidx < phba->cfg_fcp_eq_count; fcp_cqidx++) {
if (!phba->sli4_hba.fcp_cq[fcp_cqidx]) {
goto out_destroy_fcp_wq;
}
rc = lpfc_rq_create(phba, phba->sli4_hba.hdr_rq, phba->sli4_hba.dat_rq,
- phba->sli4_hba.rxq_cq, LPFC_USOL);
+ phba->sli4_hba.els_cq, LPFC_USOL);
if (rc) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0541 Failed setup of Receive Queue: "
"parent cq-id=%d\n",
phba->sli4_hba.hdr_rq->queue_id,
phba->sli4_hba.dat_rq->queue_id,
- phba->sli4_hba.rxq_cq->queue_id);
+ phba->sli4_hba.els_cq->queue_id);
return 0;
out_destroy_fcp_wq:
out_destroy_fcp_cq:
for (--fcp_cqidx; fcp_cqidx >= 0; fcp_cqidx--)
lpfc_cq_destroy(phba, phba->sli4_hba.fcp_cq[fcp_cqidx]);
- lpfc_cq_destroy(phba, phba->sli4_hba.rxq_cq);
-out_destroy_els_cq:
lpfc_cq_destroy(phba, phba->sli4_hba.els_cq);
out_destroy_mbx_cq:
lpfc_cq_destroy(phba, phba->sli4_hba.mbx_cq);
* operation.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* ENOMEM - No availble memory
* EIO - The mailbox failed to complete successfully.
**/
lpfc_cq_destroy(phba, phba->sli4_hba.mbx_cq);
/* Unset ELS complete queue */
lpfc_cq_destroy(phba, phba->sli4_hba.els_cq);
- /* Unset unsolicited receive complete queue */
- lpfc_cq_destroy(phba, phba->sli4_hba.rxq_cq);
/* Unset FCP response complete queue */
for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++)
lpfc_cq_destroy(phba, phba->sli4_hba.fcp_cq[fcp_qidx]);
* Later, this can be used for all the slow-path events.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* -ENOMEM - No availble memory
**/
static int
* all resources assigned to the PCI function which originates this request.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* ENOMEM - No availble memory
* EIO - The mailbox failed to complete successfully.
**/
* with SLI-4 interface spec.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static int
pdev = phba->pcidev;
/* Set the device DMA mask size */
- if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0)
- if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0)
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0
+ || pci_set_consistent_dma_mask(pdev,DMA_BIT_MASK(64)) != 0) {
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0
+ || pci_set_consistent_dma_mask(pdev,DMA_BIT_MASK(32)) != 0) {
return error;
+ }
+ }
/* Get the bus address of SLI4 device Bar0, Bar1, and Bar2 and the
* number of bytes required by each mapping. They are actually
* will be left with MSI-X enabled and leaks its vectors.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static int
* is done in this function.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
*/
static int
* MSI-X -> MSI -> IRQ.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static uint32_t
* enabled and leaks its vectors.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static int
* which is done in this function.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static int
* MSI-X -> MSI -> IRQ.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static uint32_t
{
struct lpfc_hba *phba;
struct lpfc_vport *vport = NULL;
+ struct Scsi_Host *shost = NULL;
int error;
uint32_t cfg_mode, intr_mode;
goto out_destroy_shost;
}
+ shost = lpfc_shost_from_vport(vport); /* save shost for error cleanup */
/* Now, trying to enable interrupt and bring up the device */
cfg_mode = phba->cfg_use_msi;
while (true) {
lpfc_sli_pci_mem_unset(phba);
out_disable_pci_dev:
lpfc_disable_pci_dev(phba);
+ if (shost)
+ scsi_host_put(shost);
out_free_phba:
lpfc_hba_free(phba);
return error;
/* Restore device state from PCI config space */
pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
+
if (pdev->is_busmaster)
pci_set_master(pdev);
}
/**
+ * lpfc_sli_prep_dev_for_recover - Prepare SLI3 device for pci slot recover
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is called to prepare the SLI3 device for PCI slot recover. It
+ * aborts and stops all the on-going I/Os on the pci device.
+ **/
+static void
+lpfc_sli_prep_dev_for_recover(struct lpfc_hba *phba)
+{
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2723 PCI channel I/O abort preparing for recovery\n");
+ /* Prepare for bringing HBA offline */
+ lpfc_offline_prep(phba);
+ /* Clear sli active flag to prevent sysfs access to HBA */
+ spin_lock_irq(&phba->hbalock);
+ phba->sli.sli_flag &= ~LPFC_SLI_ACTIVE;
+ spin_unlock_irq(&phba->hbalock);
+ /* Stop and flush all I/Os and bring HBA offline */
+ lpfc_offline(phba);
+}
+
+/**
+ * lpfc_sli_prep_dev_for_reset - Prepare SLI3 device for pci slot reset
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is called to prepare the SLI3 device for PCI slot reset. It
+ * disables the device interrupt and pci device, and aborts the internal FCP
+ * pending I/Os.
+ **/
+static void
+lpfc_sli_prep_dev_for_reset(struct lpfc_hba *phba)
+{
+ struct lpfc_sli *psli = &phba->sli;
+ struct lpfc_sli_ring *pring;
+
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2710 PCI channel disable preparing for reset\n");
+ /* Disable interrupt and pci device */
+ lpfc_sli_disable_intr(phba);
+ pci_disable_device(phba->pcidev);
+ /*
+ * There may be I/Os dropped by the firmware.
+ * Error iocb (I/O) on txcmplq and let the SCSI layer
+ * retry it after re-establishing link.
+ */
+ pring = &psli->ring[psli->fcp_ring];
+ lpfc_sli_abort_iocb_ring(phba, pring);
+}
+
+/**
+ * lpfc_sli_prep_dev_for_perm_failure - Prepare SLI3 dev for pci slot disable
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is called to prepare the SLI3 device for PCI slot permanently
+ * disabling. It blocks the SCSI transport layer traffic and flushes the FCP
+ * pending I/Os.
+ **/
+static void
+lpfc_prep_dev_for_perm_failure(struct lpfc_hba *phba)
+{
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2711 PCI channel permanent disable for failure\n");
+ /* Clean up all driver's outstanding SCSI I/Os */
+ lpfc_sli_flush_fcp_rings(phba);
+}
+
+/**
* lpfc_io_error_detected_s3 - Method for handling SLI-3 device PCI I/O error
* @pdev: pointer to PCI device.
* @state: the current PCI connection state.
* as desired.
*
* Return codes
+ * PCI_ERS_RESULT_CAN_RECOVER - can be recovered with reset_link
* PCI_ERS_RESULT_NEED_RESET - need to reset before recovery
* PCI_ERS_RESULT_DISCONNECT - device could not be recovered
**/
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
- struct lpfc_sli *psli = &phba->sli;
- struct lpfc_sli_ring *pring;
- if (state == pci_channel_io_perm_failure) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "0472 PCI channel I/O permanent failure\n");
- /* Block all SCSI devices' I/Os on the host */
- lpfc_scsi_dev_block(phba);
- /* Clean up all driver's outstanding SCSI I/Os */
- lpfc_sli_flush_fcp_rings(phba);
+ /* Block all SCSI devices' I/Os on the host */
+ lpfc_scsi_dev_block(phba);
+
+ switch (state) {
+ case pci_channel_io_normal:
+ /* Non-fatal error, prepare for recovery */
+ lpfc_sli_prep_dev_for_recover(phba);
+ return PCI_ERS_RESULT_CAN_RECOVER;
+ case pci_channel_io_frozen:
+ /* Fatal error, prepare for slot reset */
+ lpfc_sli_prep_dev_for_reset(phba);
+ return PCI_ERS_RESULT_NEED_RESET;
+ case pci_channel_io_perm_failure:
+ /* Permanent failure, prepare for device down */
+ lpfc_prep_dev_for_perm_failure(phba);
return PCI_ERS_RESULT_DISCONNECT;
+ default:
+ /* Unknown state, prepare and request slot reset */
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0472 Unknown PCI error state: x%x\n", state);
+ lpfc_sli_prep_dev_for_reset(phba);
+ return PCI_ERS_RESULT_NEED_RESET;
}
-
- pci_disable_device(pdev);
- /*
- * There may be I/Os dropped by the firmware.
- * Error iocb (I/O) on txcmplq and let the SCSI layer
- * retry it after re-establishing link.
- */
- pring = &psli->ring[psli->fcp_ring];
- lpfc_sli_abort_iocb_ring(phba, pring);
-
- /* Disable interrupt */
- lpfc_sli_disable_intr(phba);
-
- /* Request a slot reset. */
- return PCI_ERS_RESULT_NEED_RESET;
}
/**
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+ /* Bring the device online */
lpfc_online(phba);
+
+ /* Clean up Advanced Error Reporting (AER) if needed */
+ if (phba->hba_flag & HBA_AER_ENABLED)
+ pci_cleanup_aer_uncorrect_error_status(pdev);
}
/**
if (phba->sli_rev == LPFC_SLI_REV4) {
if (max_xri <= 100)
- return 4;
+ return 10;
else if (max_xri <= 256)
- return 8;
+ return 25;
else if (max_xri <= 512)
- return 16;
+ return 50;
else if (max_xri <= 1024)
- return 32;
+ return 100;
else
- return 48;
+ return 150;
} else
return 0;
}
{
struct lpfc_hba *phba;
struct lpfc_vport *vport = NULL;
+ struct Scsi_Host *shost = NULL;
int error;
uint32_t cfg_mode, intr_mode;
int mcnt;
goto out_destroy_shost;
}
+ shost = lpfc_shost_from_vport(vport); /* save shost for error cleanup */
/* Now, trying to enable interrupt and bring up the device */
cfg_mode = phba->cfg_use_msi;
while (true) {
error = -ENODEV;
goto out_free_sysfs_attr;
}
+ /* Default to single FCP EQ for non-MSI-X */
+ if (phba->intr_type != MSIX)
+ phba->cfg_fcp_eq_count = 1;
/* Set up SLI-4 HBA */
if (lpfc_sli4_hba_setup(phba)) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
/* Perform post initialization setup */
lpfc_post_init_setup(phba);
+ /* Check if there are static vports to be created. */
+ lpfc_create_static_vport(phba);
+
return 0;
out_disable_intr:
lpfc_sli4_pci_mem_unset(phba);
out_disable_pci_dev:
lpfc_disable_pci_dev(phba);
+ if (shost)
+ scsi_host_put(shost);
out_free_phba:
lpfc_hba_free(phba);
return error;
lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
{
int rc;
- uint16_t dev_id;
+ struct lpfc_sli_intf intf;
- if (pci_read_config_word(pdev, PCI_DEVICE_ID, &dev_id))
+ if (pci_read_config_dword(pdev, LPFC_SLIREV_CONF_WORD, &intf.word0))
return -ENODEV;
- switch (dev_id) {
- case PCI_DEVICE_ID_TIGERSHARK:
+ if ((bf_get(lpfc_sli_intf_valid, &intf) == LPFC_SLI_INTF_VALID) &&
+ (bf_get(lpfc_sli_intf_rev, &intf) == LPFC_SLIREV_CONF_SLI4))
rc = lpfc_pci_probe_one_s4(pdev, pid);
- break;
- default:
+ else
rc = lpfc_pci_probe_one_s3(pdev, pid);
- break;
- }
+
return rc;
}
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_SERVERENGINE, PCI_DEVICE_ID_TIGERSHARK,
PCI_ANY_ID, PCI_ANY_ID, },
+ {PCI_VENDOR_ID_SERVERENGINE, PCI_DEVICE_ID_TOMCAT,
+ PCI_ANY_ID, PCI_ANY_ID, },
+ {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_FALCON,
+ PCI_ANY_ID, PCI_ANY_ID, },
{ 0 }
};
if (lpfc_enable_npiv)
fc_release_transport(lpfc_vport_transport_template);
if (_dump_buf_data) {
- printk(KERN_ERR "BLKGRD freeing %lu pages for _dump_buf_data "
- "at 0x%p\n",
+ printk(KERN_ERR "9062 BLKGRD: freeing %lu pages for "
+ "_dump_buf_data at 0x%p\n",
(1L << _dump_buf_data_order), _dump_buf_data);
free_pages((unsigned long)_dump_buf_data, _dump_buf_data_order);
}
if (_dump_buf_dif) {
- printk(KERN_ERR "BLKGRD freeing %lu pages for _dump_buf_dif "
- "at 0x%p\n",
+ printk(KERN_ERR "9049 BLKGRD: freeing %lu pages for "
+ "_dump_buf_dif at 0x%p\n",
(1L << _dump_buf_dif_order), _dump_buf_dif);
free_pages((unsigned long)_dump_buf_dif, _dump_buf_dif_order);
}
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff