/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2008 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2009 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport_fc.h>
+#include "lpfc_hw4.h"
#include "lpfc_hw.h"
#include "lpfc_sli.h"
+#include "lpfc_sli4.h"
+#include "lpfc_nl.h"
#include "lpfc_disc.h"
#include "lpfc_scsi.h"
#include "lpfc.h"
static int lpfc_max_els_tries = 3;
+/**
+ * lpfc_els_chk_latt - Check host link attention event for a vport
+ * @vport: pointer to a host virtual N_Port data structure.
+ *
+ * This routine checks whether there is an outstanding host link
+ * attention event during the discovery process with the @vport. It is done
+ * by reading the HBA's Host Attention (HA) register. If there is any host
+ * link attention events during this @vport's discovery process, the @vport
+ * shall be marked as FC_ABORT_DISCOVERY, a host link attention clear shall
+ * be issued if the link state is not already in host link cleared state,
+ * and a return code shall indicate whether the host link attention event
+ * had happened.
+ *
+ * Note that, if either the host link is in state LPFC_LINK_DOWN or @vport
+ * state in LPFC_VPORT_READY, the request for checking host link attention
+ * event will be ignored and a return code shall indicate no host link
+ * attention event had happened.
+ *
+ * Return codes
+ * 0 - no host link attention event happened
+ * 1 - host link attention event happened
+ **/
int
lpfc_els_chk_latt(struct lpfc_vport *vport)
{
uint32_t ha_copy;
if (vport->port_state >= LPFC_VPORT_READY ||
- phba->link_state == LPFC_LINK_DOWN)
+ phba->link_state == LPFC_LINK_DOWN ||
+ phba->sli_rev > LPFC_SLI_REV3)
return 0;
/* Read the HBA Host Attention Register */
return 1;
}
-static struct lpfc_iocbq *
+/**
+ * lpfc_prep_els_iocb - Allocate and prepare a lpfc iocb data structure
+ * @vport: pointer to a host virtual N_Port data structure.
+ * @expectRsp: flag indicating whether response is expected.
+ * @cmdSize: size of the ELS command.
+ * @retry: number of retries to the command IOCB when it fails.
+ * @ndlp: pointer to a node-list data structure.
+ * @did: destination identifier.
+ * @elscmd: the ELS command code.
+ *
+ * This routine is used for allocating a lpfc-IOCB data structure from
+ * the driver lpfc-IOCB free-list and prepare the IOCB with the parameters
+ * passed into the routine for discovery state machine to issue an Extended
+ * Link Service (ELS) commands. It is a generic lpfc-IOCB allocation
+ * and preparation routine that is used by all the discovery state machine
+ * routines and the ELS command-specific fields will be later set up by
+ * the individual discovery machine routines after calling this routine
+ * allocating and preparing a generic IOCB data structure. It fills in the
+ * Buffer Descriptor Entries (BDEs), allocates buffers for both command
+ * payload and response payload (if expected). The reference count on the
+ * ndlp is incremented by 1 and the reference to the ndlp is put into
+ * context1 of the IOCB data structure for this IOCB to hold the ndlp
+ * reference for the command's callback function to access later.
+ *
+ * Return code
+ * Pointer to the newly allocated/prepared els iocb data structure
+ * NULL - when els iocb data structure allocation/preparation failed
+ **/
+struct lpfc_iocbq *
lpfc_prep_els_iocb(struct lpfc_vport *vport, uint8_t expectRsp,
uint16_t cmdSize, uint8_t retry,
struct lpfc_nodelist *ndlp, uint32_t did,
if (elsiocb == NULL)
return NULL;
+ /*
+ * If this command is for fabric controller and HBA running
+ * in FIP mode send FLOGI, FDISC and LOGO as FIP frames.
+ */
+ if ((did == Fabric_DID) &&
+ bf_get(lpfc_fip_flag, &phba->sli4_hba.sli4_flags) &&
+ ((elscmd == ELS_CMD_FLOGI) ||
+ (elscmd == ELS_CMD_FDISC) ||
+ (elscmd == ELS_CMD_LOGO)))
+ elsiocb->iocb_flag |= LPFC_FIP_ELS;
+ else
+ elsiocb->iocb_flag &= ~LPFC_FIP_ELS;
+
icmd = &elsiocb->iocb;
/* fill in BDEs for command */
icmd->un.elsreq64.bdl.addrHigh = putPaddrHigh(pbuflist->phys);
icmd->un.elsreq64.bdl.addrLow = putPaddrLow(pbuflist->phys);
- icmd->un.elsreq64.bdl.bdeFlags = BUFF_TYPE_BDL;
+ icmd->un.elsreq64.bdl.bdeFlags = BUFF_TYPE_BLP_64;
icmd->un.elsreq64.remoteID = did; /* DID */
if (expectRsp) {
icmd->un.elsreq64.bdl.bdeSize = (2 * sizeof(struct ulp_bde64));
icmd->un.elsreq64.myID = vport->fc_myDID;
/* For ELS_REQUEST64_CR, use the VPI by default */
- icmd->ulpContext = vport->vpi;
+ icmd->ulpContext = vport->vpi + phba->vpi_base;
icmd->ulpCt_h = 0;
- icmd->ulpCt_l = 1;
+ /* The CT field must be 0=INVALID_RPI for the ECHO cmd */
+ if (elscmd == ELS_CMD_ECHO)
+ icmd->ulpCt_l = 0; /* context = invalid RPI */
+ else
+ icmd->ulpCt_l = 1; /* context = VPI */
}
bpl = (struct ulp_bde64 *) pbuflist->virt;
bpl->addrLow = le32_to_cpu(putPaddrLow(prsp->phys));
bpl->addrHigh = le32_to_cpu(putPaddrHigh(prsp->phys));
bpl->tus.f.bdeSize = FCELSSIZE;
- bpl->tus.f.bdeFlags = BUFF_USE_RCV;
+ bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64;
bpl->tus.w = le32_to_cpu(bpl->tus.w);
}
return elsiocb;
els_iocb_free_pbuf_exit:
- lpfc_mbuf_free(phba, prsp->virt, prsp->phys);
+ if (expectRsp)
+ lpfc_mbuf_free(phba, prsp->virt, prsp->phys);
kfree(pbuflist);
els_iocb_free_prsp_exit:
return NULL;
}
-static int
+/**
+ * lpfc_issue_fabric_reglogin - Issue fabric registration login for a vport
+ * @vport: pointer to a host virtual N_Port data structure.
+ *
+ * This routine issues a fabric registration login for a @vport. An
+ * active ndlp node with Fabric_DID must already exist for this @vport.
+ * The routine invokes two mailbox commands to carry out fabric registration
+ * login through the HBA firmware: the first mailbox command requests the
+ * HBA to perform link configuration for the @vport; and the second mailbox
+ * command requests the HBA to perform the actual fabric registration login
+ * with the @vport.
+ *
+ * Return code
+ * 0 - successfully issued fabric registration login for @vport
+ * -ENXIO -- failed to issue fabric registration login for @vport
+ **/
+int
lpfc_issue_fabric_reglogin(struct lpfc_vport *vport)
{
struct lpfc_hba *phba = vport->phba;
err = 4;
goto fail;
}
- rc = lpfc_reg_login(phba, vport->vpi, Fabric_DID, (uint8_t *)sp, mbox,
- 0);
+ rc = lpfc_reg_rpi(phba, vport->vpi, Fabric_DID, (uint8_t *)sp, mbox, 0);
if (rc) {
err = 5;
goto fail_free_mbox;
return -ENXIO;
}
+/**
+ * lpfc_issue_reg_vfi - Register VFI for this vport's fabric login
+ * @vport: pointer to a host virtual N_Port data structure.
+ *
+ * This routine issues a REG_VFI mailbox for the vfi, vpi, fcfi triplet for
+ * the @vport. This mailbox command is necessary for FCoE only.
+ *
+ * Return code
+ * 0 - successfully issued REG_VFI for @vport
+ * A failure code otherwise.
+ **/
+static int
+lpfc_issue_reg_vfi(struct lpfc_vport *vport)
+{
+ struct lpfc_hba *phba = vport->phba;
+ LPFC_MBOXQ_t *mboxq;
+ struct lpfc_nodelist *ndlp;
+ struct serv_parm *sp;
+ struct lpfc_dmabuf *dmabuf;
+ int rc = 0;
+
+ sp = &phba->fc_fabparam;
+ ndlp = lpfc_findnode_did(vport, Fabric_DID);
+ if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) {
+ rc = -ENODEV;
+ goto fail;
+ }
+
+ dmabuf = kzalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+ if (!dmabuf) {
+ rc = -ENOMEM;
+ goto fail;
+ }
+ dmabuf->virt = lpfc_mbuf_alloc(phba, MEM_PRI, &dmabuf->phys);
+ if (!dmabuf->virt) {
+ rc = -ENOMEM;
+ goto fail_free_dmabuf;
+ }
+ mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mboxq) {
+ rc = -ENOMEM;
+ goto fail_free_coherent;
+ }
+ vport->port_state = LPFC_FABRIC_CFG_LINK;
+ memcpy(dmabuf->virt, &phba->fc_fabparam, sizeof(vport->fc_sparam));
+ lpfc_reg_vfi(mboxq, vport, dmabuf->phys);
+ mboxq->mbox_cmpl = lpfc_mbx_cmpl_reg_vfi;
+ mboxq->vport = vport;
+ mboxq->context1 = dmabuf;
+ rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
+ if (rc == MBX_NOT_FINISHED) {
+ rc = -ENXIO;
+ goto fail_free_mbox;
+ }
+ return 0;
+
+fail_free_mbox:
+ mempool_free(mboxq, phba->mbox_mem_pool);
+fail_free_coherent:
+ lpfc_mbuf_free(phba, dmabuf->virt, dmabuf->phys);
+fail_free_dmabuf:
+ kfree(dmabuf);
+fail:
+ lpfc_vport_set_state(vport, FC_VPORT_FAILED);
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
+ "0289 Issue Register VFI failed: Err %d\n", rc);
+ return rc;
+}
+
+/**
+ * lpfc_cmpl_els_flogi_fabric - Completion function for flogi to a fabric port
+ * @vport: pointer to a host virtual N_Port data structure.
+ * @ndlp: pointer to a node-list data structure.
+ * @sp: pointer to service parameter data structure.
+ * @irsp: pointer to the IOCB within the lpfc response IOCB.
+ *
+ * This routine is invoked by the lpfc_cmpl_els_flogi() completion callback
+ * function to handle the completion of a Fabric Login (FLOGI) into a fabric
+ * port in a fabric topology. It properly sets up the parameters to the @ndlp
+ * from the IOCB response. It also check the newly assigned N_Port ID to the
+ * @vport against the previously assigned N_Port ID. If it is different from
+ * the previously assigned Destination ID (DID), the lpfc_unreg_rpi() routine
+ * is invoked on all the remaining nodes with the @vport to unregister the
+ * Remote Port Indicators (RPIs). Finally, the lpfc_issue_fabric_reglogin()
+ * is invoked to register login to the fabric.
+ *
+ * Return code
+ * 0 - Success (currently, always return 0)
+ **/
static int
lpfc_cmpl_els_flogi_fabric(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
struct serv_parm *sp, IOCB_t *irsp)
*/
list_for_each_entry_safe(np, next_np,
&vport->fc_nodes, nlp_listp) {
- if (!NLP_CHK_NODE_ACT(ndlp))
+ if (!NLP_CHK_NODE_ACT(np))
continue;
if ((np->nlp_state != NLP_STE_NPR_NODE) ||
!(np->nlp_flag & NLP_NPR_ADISC))
}
}
- lpfc_nlp_set_state(vport, ndlp, NLP_STE_REG_LOGIN_ISSUE);
-
- if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED &&
- vport->fc_flag & FC_VPORT_NEEDS_REG_VPI) {
- lpfc_register_new_vport(phba, vport, ndlp);
- return 0;
+ if (phba->sli_rev < LPFC_SLI_REV4) {
+ lpfc_nlp_set_state(vport, ndlp, NLP_STE_REG_LOGIN_ISSUE);
+ if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED &&
+ vport->fc_flag & FC_VPORT_NEEDS_REG_VPI)
+ lpfc_register_new_vport(phba, vport, ndlp);
+ else
+ lpfc_issue_fabric_reglogin(vport);
+ } else {
+ ndlp->nlp_type |= NLP_FABRIC;
+ lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
+ if (vport->vfi_state & LPFC_VFI_REGISTERED) {
+ lpfc_start_fdiscs(phba);
+ lpfc_do_scr_ns_plogi(phba, vport);
+ } else
+ lpfc_issue_reg_vfi(vport);
}
- lpfc_issue_fabric_reglogin(vport);
return 0;
}
-
-/*
- * We FLOGIed into an NPort, initiate pt2pt protocol
- */
+/**
+ * lpfc_cmpl_els_flogi_nport - Completion function for flogi to an N_Port
+ * @vport: pointer to a host virtual N_Port data structure.
+ * @ndlp: pointer to a node-list data structure.
+ * @sp: pointer to service parameter data structure.
+ *
+ * This routine is invoked by the lpfc_cmpl_els_flogi() completion callback
+ * function to handle the completion of a Fabric Login (FLOGI) into an N_Port
+ * in a point-to-point topology. First, the @vport's N_Port Name is compared
+ * with the received N_Port Name: if the @vport's N_Port Name is greater than
+ * the received N_Port Name lexicographically, this node shall assign local
+ * N_Port ID (PT2PT_LocalID: 1) and remote N_Port ID (PT2PT_RemoteID: 2) and
+ * will send out Port Login (PLOGI) with the N_Port IDs assigned. Otherwise,
+ * this node shall just wait for the remote node to issue PLOGI and assign
+ * N_Port IDs.
+ *
+ * Return code
+ * 0 - Success
+ * -ENXIO - Fail
+ **/
static int
lpfc_cmpl_els_flogi_nport(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
struct serv_parm *sp)
return -ENXIO;
}
+/**
+ * lpfc_cmpl_els_flogi - Completion callback function for flogi
+ * @phba: pointer to lpfc hba data structure.
+ * @cmdiocb: pointer to lpfc command iocb data structure.
+ * @rspiocb: pointer to lpfc response iocb data structure.
+ *
+ * This routine is the top-level completion callback function for issuing
+ * a Fabric Login (FLOGI) command. If the response IOCB reported error,
+ * the lpfc_els_retry() routine shall be invoked to retry the FLOGI. If
+ * retry has been made (either immediately or delayed with lpfc_els_retry()
+ * returning 1), the command IOCB will be released and function returned.
+ * If the retry attempt has been given up (possibly reach the maximum
+ * number of retries), one additional decrement of ndlp reference shall be
+ * invoked before going out after releasing the command IOCB. This will
+ * actually release the remote node (Note, lpfc_els_free_iocb() will also
+ * invoke one decrement of ndlp reference count). If no error reported in
+ * the IOCB status, the command Port ID field is used to determine whether
+ * this is a point-to-point topology or a fabric topology: if the Port ID
+ * field is assigned, it is a fabric topology; otherwise, it is a
+ * point-to-point topology. The routine lpfc_cmpl_els_flogi_fabric() or
+ * lpfc_cmpl_els_flogi_nport() shall be invoked accordingly to handle the
+ * specific topology completion conditions.
+ **/
static void
lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
struct lpfc_iocbq *rspiocb)
lpfc_els_free_iocb(phba, cmdiocb);
}
+/**
+ * lpfc_issue_els_flogi - Issue an flogi iocb command for a vport
+ * @vport: pointer to a host virtual N_Port data structure.
+ * @ndlp: pointer to a node-list data structure.
+ * @retry: number of retries to the command IOCB.
+ *
+ * This routine issues a Fabric Login (FLOGI) Request ELS command
+ * for a @vport. The initiator service parameters are put into the payload
+ * of the FLOGI Request IOCB and the top-level callback function pointer
+ * to lpfc_cmpl_els_flogi() routine is put to the IOCB completion callback
+ * function field. The lpfc_issue_fabric_iocb routine is invoked to send
+ * out FLOGI ELS command with one outstanding fabric IOCB at a time.
+ *
+ * Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp
+ * will be incremented by 1 for holding the ndlp and the reference to ndlp
+ * will be stored into the context1 field of the IOCB for the completion
+ * callback function to the FLOGI ELS command.
+ *
+ * Return code
+ * 0 - successfully issued flogi iocb for @vport
+ * 1 - failed to issue flogi iocb for @vport
+ **/
static int
lpfc_issue_els_flogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
uint8_t retry)
if (sp->cmn.fcphHigh < FC_PH3)
sp->cmn.fcphHigh = FC_PH3;
- if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) {
+ if (phba->sli_rev == LPFC_SLI_REV4) {
+ elsiocb->iocb.ulpCt_h = ((SLI4_CT_FCFI >> 1) & 1);
+ elsiocb->iocb.ulpCt_l = (SLI4_CT_FCFI & 1);
+ /* FLOGI needs to be 3 for WQE FCFI */
+ /* Set the fcfi to the fcfi we registered with */
+ elsiocb->iocb.ulpContext = phba->fcf.fcfi;
+ } else if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) {
sp->cmn.request_multiple_Nport = 1;
-
/* For FLOGI, Let FLOGI rsp set the NPortID for VPI 0 */
icmd->ulpCt_h = 1;
icmd->ulpCt_l = 0;
return 0;
}
+/**
+ * lpfc_els_abort_flogi - Abort all outstanding flogi iocbs
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine aborts all the outstanding Fabric Login (FLOGI) IOCBs
+ * with a @phba. This routine walks all the outstanding IOCBs on the txcmplq
+ * list and issues an abort IOCB commond on each outstanding IOCB that
+ * contains a active Fabric_DID ndlp. Note that this function is to issue
+ * the abort IOCB command on all the outstanding IOCBs, thus when this
+ * function returns, it does not guarantee all the IOCBs are actually aborted.
+ *
+ * Return code
+ * 0 - Sucessfully issued abort iocb on all outstanding flogis (Always 0)
+ **/
int
lpfc_els_abort_flogi(struct lpfc_hba *phba)
{
if (icmd->ulpCommand == CMD_ELS_REQUEST64_CR &&
icmd->un.elsreq64.bdl.ulpIoTag32) {
ndlp = (struct lpfc_nodelist *)(iocb->context1);
- if (ndlp && (ndlp->nlp_DID == Fabric_DID)) {
+ if (ndlp && NLP_CHK_NODE_ACT(ndlp) &&
+ (ndlp->nlp_DID == Fabric_DID))
lpfc_sli_issue_abort_iotag(phba, pring, iocb);
- }
}
}
spin_unlock_irq(&phba->hbalock);
return 0;
}
+/**
+ * lpfc_initial_flogi - Issue an initial fabric login for a vport
+ * @vport: pointer to a host virtual N_Port data structure.
+ *
+ * This routine issues an initial Fabric Login (FLOGI) for the @vport
+ * specified. It first searches the ndlp with the Fabric_DID (0xfffffe) from
+ * the @vport's ndlp list. If no such ndlp found, it will create an ndlp and
+ * put it into the @vport's ndlp list. If an inactive ndlp found on the list,
+ * it will just be enabled and made active. The lpfc_issue_els_flogi() routine
+ * is then invoked with the @vport and the ndlp to perform the FLOGI for the
+ * @vport.
+ *
+ * Return code
+ * 0 - failed to issue initial flogi for @vport
+ * 1 - successfully issued initial flogi for @vport
+ **/
int
lpfc_initial_flogi(struct lpfc_vport *vport)
{
if (!ndlp)
return 0;
lpfc_nlp_init(vport, ndlp, Fabric_DID);
+ /* Set the node type */
+ ndlp->nlp_type |= NLP_FABRIC;
/* Put ndlp onto node list */
lpfc_enqueue_node(vport, ndlp);
} else if (!NLP_CHK_NODE_ACT(ndlp)) {
return 1;
}
+/**
+ * lpfc_initial_fdisc - Issue an initial fabric discovery for a vport
+ * @vport: pointer to a host virtual N_Port data structure.
+ *
+ * This routine issues an initial Fabric Discover (FDISC) for the @vport
+ * specified. It first searches the ndlp with the Fabric_DID (0xfffffe) from
+ * the @vport's ndlp list. If no such ndlp found, it will create an ndlp and
+ * put it into the @vport's ndlp list. If an inactive ndlp found on the list,
+ * it will just be enabled and made active. The lpfc_issue_els_fdisc() routine
+ * is then invoked with the @vport and the ndlp to perform the FDISC for the
+ * @vport.
+ *
+ * Return code
+ * 0 - failed to issue initial fdisc for @vport
+ * 1 - successfully issued initial fdisc for @vport
+ **/
int
lpfc_initial_fdisc(struct lpfc_vport *vport)
{
return 1;
}
+/**
+ * lpfc_more_plogi - Check and issue remaining plogis for a vport
+ * @vport: pointer to a host virtual N_Port data structure.
+ *
+ * This routine checks whether there are more remaining Port Logins
+ * (PLOGI) to be issued for the @vport. If so, it will invoke the routine
+ * lpfc_els_disc_plogi() to go through the Node Port Recovery (NPR) nodes
+ * to issue ELS PLOGIs up to the configured discover threads with the
+ * @vport (@vport->cfg_discovery_threads). The function also decrement
+ * the @vport's num_disc_node by 1 if it is not already 0.
+ **/
void
lpfc_more_plogi(struct lpfc_vport *vport)
{
return;
}
+/**
+ * lpfc_plogi_confirm_nport - Confirm pologi wwpn matches stored ndlp
+ * @phba: pointer to lpfc hba data structure.
+ * @prsp: pointer to response IOCB payload.
+ * @ndlp: pointer to a node-list data structure.
+ *
+ * This routine checks and indicates whether the WWPN of an N_Port, retrieved
+ * from a PLOGI, matches the WWPN that is stored in the @ndlp for that N_POrt.
+ * The following cases are considered N_Port confirmed:
+ * 1) The N_Port is a Fabric ndlp; 2) The @ndlp is on vport list and matches
+ * the WWPN of the N_Port logged into; 3) The @ndlp is not on vport list but
+ * it does not have WWPN assigned either. If the WWPN is confirmed, the
+ * pointer to the @ndlp will be returned. If the WWPN is not confirmed:
+ * 1) if there is a node on vport list other than the @ndlp with the same
+ * WWPN of the N_Port PLOGI logged into, the lpfc_unreg_rpi() will be invoked
+ * on that node to release the RPI associated with the node; 2) if there is
+ * no node found on vport list with the same WWPN of the N_Port PLOGI logged
+ * into, a new node shall be allocated (or activated). In either case, the
+ * parameters of the @ndlp shall be copied to the new_ndlp, the @ndlp shall
+ * be released and the new_ndlp shall be put on to the vport node list and
+ * its pointer returned as the confirmed node.
+ *
+ * Note that before the @ndlp got "released", the keepDID from not-matching
+ * or inactive "new_ndlp" on the vport node list is assigned to the nlp_DID
+ * of the @ndlp. This is because the release of @ndlp is actually to put it
+ * into an inactive state on the vport node list and the vport node list
+ * management algorithm does not allow two node with a same DID.
+ *
+ * Return code
+ * pointer to the PLOGI N_Port @ndlp
+ **/
static struct lpfc_nodelist *
lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp,
struct lpfc_nodelist *ndlp)
struct fc_rport *rport;
struct serv_parm *sp;
uint8_t name[sizeof(struct lpfc_name)];
- uint32_t rc;
+ uint32_t rc, keepDID = 0;
/* Fabric nodes can have the same WWPN so we don't bother searching
* by WWPN. Just return the ndlp that was given to us.
return ndlp;
lpfc_nlp_init(vport, new_ndlp, ndlp->nlp_DID);
} else if (!NLP_CHK_NODE_ACT(new_ndlp)) {
+ rc = memcmp(&ndlp->nlp_portname, name,
+ sizeof(struct lpfc_name));
+ if (!rc)
+ return ndlp;
new_ndlp = lpfc_enable_node(vport, new_ndlp,
NLP_STE_UNUSED_NODE);
if (!new_ndlp)
return ndlp;
- }
+ keepDID = new_ndlp->nlp_DID;
+ } else
+ keepDID = new_ndlp->nlp_DID;
lpfc_unreg_rpi(vport, new_ndlp);
new_ndlp->nlp_DID = ndlp->nlp_DID;
}
new_ndlp->nlp_type = ndlp->nlp_type;
}
+ /* We shall actually free the ndlp with both nlp_DID and
+ * nlp_portname fields equals 0 to avoid any ndlp on the
+ * nodelist never to be used.
+ */
+ if (ndlp->nlp_DID == 0) {
+ spin_lock_irq(&phba->ndlp_lock);
+ NLP_SET_FREE_REQ(ndlp);
+ spin_unlock_irq(&phba->ndlp_lock);
+ }
+ /* Two ndlps cannot have the same did on the nodelist */
+ ndlp->nlp_DID = keepDID;
lpfc_drop_node(vport, ndlp);
}
else {
lpfc_unreg_rpi(vport, ndlp);
- ndlp->nlp_DID = 0; /* Two ndlps cannot have the same did */
+ /* Two ndlps cannot have the same did */
+ ndlp->nlp_DID = keepDID;
lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE);
}
return new_ndlp;
}
+/**
+ * lpfc_end_rscn - Check and handle more rscn for a vport
+ * @vport: pointer to a host virtual N_Port data structure.
+ *
+ * This routine checks whether more Registration State Change
+ * Notifications (RSCNs) came in while the discovery state machine was in
+ * the FC_RSCN_MODE. If so, the lpfc_els_handle_rscn() routine will be
+ * invoked to handle the additional RSCNs for the @vport. Otherwise, the
+ * FC_RSCN_MODE bit will be cleared with the @vport to mark as the end of
+ * handling the RSCNs.
+ **/
void
lpfc_end_rscn(struct lpfc_vport *vport)
{
}
}
+/**
+ * lpfc_cmpl_els_plogi - Completion callback function for plogi
+ * @phba: pointer to lpfc hba data structure.
+ * @cmdiocb: pointer to lpfc command iocb data structure.
+ * @rspiocb: pointer to lpfc response iocb data structure.
+ *
+ * This routine is the completion callback function for issuing the Port
+ * Login (PLOGI) command. For PLOGI completion, there must be an active
+ * ndlp on the vport node list that matches the remote node ID from the
+ * PLOGI reponse IOCB. If such ndlp does not exist, the PLOGI is simply
+ * ignored and command IOCB released. The PLOGI response IOCB status is
+ * checked for error conditons. If there is error status reported, PLOGI
+ * retry shall be attempted by invoking the lpfc_els_retry() routine.
+ * Otherwise, the lpfc_plogi_confirm_nport() routine shall be invoked on
+ * the ndlp and the NLP_EVT_CMPL_PLOGI state to the Discover State Machine
+ * (DSM) is set for this PLOGI completion. Finally, it checks whether
+ * there are additional N_Port nodes with the vport that need to perform
+ * PLOGI. If so, the lpfc_more_plogi() routine is invoked to issue addition
+ * PLOGIs.
+ **/
static void
lpfc_cmpl_els_plogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
struct lpfc_iocbq *rspiocb)
return;
}
+/**
+ * lpfc_issue_els_plogi - Issue an plogi iocb command for a vport
+ * @vport: pointer to a host virtual N_Port data structure.
+ * @did: destination port identifier.
+ * @retry: number of retries to the command IOCB.
+ *
+ * This routine issues a Port Login (PLOGI) command to a remote N_Port
+ * (with the @did) for a @vport. Before issuing a PLOGI to a remote N_Port,
+ * the ndlp with the remote N_Port DID must exist on the @vport's ndlp list.
+ * This routine constructs the proper feilds of the PLOGI IOCB and invokes
+ * the lpfc_sli_issue_iocb() routine to send out PLOGI ELS command.
+ *
+ * Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp
+ * will be incremented by 1 for holding the ndlp and the reference to ndlp
+ * will be stored into the context1 field of the IOCB for the completion
+ * callback function to the PLOGI ELS command.
+ *
+ * Return code
+ * 0 - Successfully issued a plogi for @vport
+ * 1 - failed to issue a plogi for @vport
+ **/
int
lpfc_issue_els_plogi(struct lpfc_vport *vport, uint32_t did, uint8_t retry)
{
IOCB_t *icmd;
struct lpfc_nodelist *ndlp;
struct lpfc_iocbq *elsiocb;
- struct lpfc_sli_ring *pring;
struct lpfc_sli *psli;
uint8_t *pcmd;
uint16_t cmdsize;
int ret;
psli = &phba->sli;
- pring = &psli->ring[LPFC_ELS_RING]; /* ELS ring */
ndlp = lpfc_findnode_did(vport, did);
if (ndlp && !NLP_CHK_NODE_ACT(ndlp))
phba->fc_stat.elsXmitPLOGI++;
elsiocb->iocb_cmpl = lpfc_cmpl_els_plogi;
- ret = lpfc_sli_issue_iocb(phba, pring, elsiocb, 0);
+ ret = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
if (ret == IOCB_ERROR) {
lpfc_els_free_iocb(phba, elsiocb);
return 0;
}
+/**
+ * lpfc_cmpl_els_prli - Completion callback function for prli
+ * @phba: pointer to lpfc hba data structure.
+ * @cmdiocb: pointer to lpfc command iocb data structure.
+ * @rspiocb: pointer to lpfc response iocb data structure.
+ *
+ * This routine is the completion callback function for a Process Login
+ * (PRLI) ELS command. The PRLI response IOCB status is checked for error
+ * status. If there is error status reported, PRLI retry shall be attempted
+ * by invoking the lpfc_els_retry() routine. Otherwise, the state
+ * NLP_EVT_CMPL_PRLI is sent to the Discover State Machine (DSM) for this
+ * ndlp to mark the PRLI completion.
+ **/
static void
lpfc_cmpl_els_prli(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
struct lpfc_iocbq *rspiocb)
return;
}
+/**
+ * lpfc_issue_els_prli - Issue a prli iocb command for a vport
+ * @vport: pointer to a host virtual N_Port data structure.
+ * @ndlp: pointer to a node-list data structure.
+ * @retry: number of retries to the command IOCB.
+ *
+ * This routine issues a Process Login (PRLI) ELS command for the
+ * @vport. The PRLI service parameters are set up in the payload of the
+ * PRLI Request command and the pointer to lpfc_cmpl_els_prli() routine
+ * is put to the IOCB completion callback func field before invoking the
+ * routine lpfc_sli_issue_iocb() to send out PRLI command.
+ *
+ * Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp
+ * will be incremented by 1 for holding the ndlp and the reference to ndlp
+ * will be stored into the context1 field of the IOCB for the completion
+ * callback function to the PRLI ELS command.
+ *
+ * Return code
+ * 0 - successfully issued prli iocb command for @vport
+ * 1 - failed to issue prli iocb command for @vport
+ **/
int
lpfc_issue_els_prli(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
uint8_t retry)
PRLI *npr;
IOCB_t *icmd;
struct lpfc_iocbq *elsiocb;
- struct lpfc_sli_ring *pring;
- struct lpfc_sli *psli;
uint8_t *pcmd;
uint16_t cmdsize;
- psli = &phba->sli;
- pring = &psli->ring[LPFC_ELS_RING]; /* ELS ring */
-
cmdsize = (sizeof(uint32_t) + sizeof(PRLI));
elsiocb = lpfc_prep_els_iocb(vport, 1, cmdsize, retry, ndlp,
ndlp->nlp_DID, ELS_CMD_PRLI);
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag |= NLP_PRLI_SND;
spin_unlock_irq(shost->host_lock);
- if (lpfc_sli_issue_iocb(phba, pring, elsiocb, 0) == IOCB_ERROR) {
+ if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) ==
+ IOCB_ERROR) {
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag &= ~NLP_PRLI_SND;
spin_unlock_irq(shost->host_lock);
return 0;
}
+/**
+ * lpfc_rscn_disc - Perform rscn discovery for a vport
+ * @vport: pointer to a host virtual N_Port data structure.
+ *
+ * This routine performs Registration State Change Notification (RSCN)
+ * discovery for a @vport. If the @vport's node port recovery count is not
+ * zero, it will invoke the lpfc_els_disc_plogi() to perform PLOGI for all
+ * the nodes that need recovery. If none of the PLOGI were needed through
+ * the lpfc_els_disc_plogi() routine, the lpfc_end_rscn() routine shall be
+ * invoked to check and handle possible more RSCN came in during the period
+ * of processing the current ones.
+ **/
+static void
+lpfc_rscn_disc(struct lpfc_vport *vport)
+{
+ lpfc_can_disctmo(vport);
+
+ /* RSCN discovery */
+ /* go thru NPR nodes and issue ELS PLOGIs */
+ if (vport->fc_npr_cnt)
+ if (lpfc_els_disc_plogi(vport))
+ return;
+
+ lpfc_end_rscn(vport);
+}
+
+/**
+ * lpfc_adisc_done - Complete the adisc phase of discovery
+ * @vport: pointer to lpfc_vport hba data structure that finished all ADISCs.
+ *
+ * This function is called when the final ADISC is completed during discovery.
+ * This function handles clearing link attention or issuing reg_vpi depending
+ * on whether npiv is enabled. This function also kicks off the PLOGI phase of
+ * discovery.
+ * This function is called with no locks held.
+ **/
+static void
+lpfc_adisc_done(struct lpfc_vport *vport)
+{
+ struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
+ struct lpfc_hba *phba = vport->phba;
+
+ /*
+ * For NPIV, cmpl_reg_vpi will set port_state to READY,
+ * and continue discovery.
+ */
+ if ((phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) &&
+ !(vport->fc_flag & FC_RSCN_MODE) &&
+ (phba->sli_rev < LPFC_SLI_REV4)) {
+ lpfc_issue_reg_vpi(phba, vport);
+ return;
+ }
+ /*
+ * For SLI2, we need to set port_state to READY
+ * and continue discovery.
+ */
+ if (vport->port_state < LPFC_VPORT_READY) {
+ /* If we get here, there is nothing to ADISC */
+ if (vport->port_type == LPFC_PHYSICAL_PORT)
+ lpfc_issue_clear_la(phba, vport);
+ if (!(vport->fc_flag & FC_ABORT_DISCOVERY)) {
+ vport->num_disc_nodes = 0;
+ /* go thru NPR list, issue ELS PLOGIs */
+ if (vport->fc_npr_cnt)
+ lpfc_els_disc_plogi(vport);
+ if (!vport->num_disc_nodes) {
+ spin_lock_irq(shost->host_lock);
+ vport->fc_flag &= ~FC_NDISC_ACTIVE;
+ spin_unlock_irq(shost->host_lock);
+ lpfc_can_disctmo(vport);
+ lpfc_end_rscn(vport);
+ }
+ }
+ vport->port_state = LPFC_VPORT_READY;
+ } else
+ lpfc_rscn_disc(vport);
+}
+
+/**
+ * lpfc_more_adisc - Issue more adisc as needed
+ * @vport: pointer to a host virtual N_Port data structure.
+ *
+ * This routine determines whether there are more ndlps on a @vport
+ * node list need to have Address Discover (ADISC) issued. If so, it will
+ * invoke the lpfc_els_disc_adisc() routine to issue ADISC on the @vport's
+ * remaining nodes which need to have ADISC sent.
+ **/
void
lpfc_more_adisc(struct lpfc_vport *vport)
{
/* go thru NPR nodes and issue any remaining ELS ADISCs */
sentadisc = lpfc_els_disc_adisc(vport);
}
+ if (!vport->num_disc_nodes)
+ lpfc_adisc_done(vport);
return;
}
-static void
-lpfc_rscn_disc(struct lpfc_vport *vport)
-{
- lpfc_can_disctmo(vport);
-
- /* RSCN discovery */
- /* go thru NPR nodes and issue ELS PLOGIs */
- if (vport->fc_npr_cnt)
- if (lpfc_els_disc_plogi(vport))
- return;
-
- lpfc_end_rscn(vport);
-}
-
+/**
+ * lpfc_cmpl_els_adisc - Completion callback function for adisc
+ * @phba: pointer to lpfc hba data structure.
+ * @cmdiocb: pointer to lpfc command iocb data structure.
+ * @rspiocb: pointer to lpfc response iocb data structure.
+ *
+ * This routine is the completion function for issuing the Address Discover
+ * (ADISC) command. It first checks to see whether link went down during
+ * the discovery process. If so, the node will be marked as node port
+ * recovery for issuing discover IOCB by the link attention handler and
+ * exit. Otherwise, the response status is checked. If error was reported
+ * in the response status, the ADISC command shall be retried by invoking
+ * the lpfc_els_retry() routine. Otherwise, if no error was reported in
+ * the response status, the state machine is invoked to set transition
+ * with respect to NLP_EVT_CMPL_ADISC event.
+ **/
static void
lpfc_cmpl_els_adisc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
struct lpfc_iocbq *rspiocb)
lpfc_disc_state_machine(vport, ndlp, cmdiocb,
NLP_EVT_CMPL_ADISC);
- if (disc && vport->num_disc_nodes) {
- /* Check to see if there are more ADISCs to be sent */
+ /* Check to see if there are more ADISCs to be sent */
+ if (disc && vport->num_disc_nodes)
lpfc_more_adisc(vport);
-
- /* Check to see if we are done with ADISC authentication */
- if (vport->num_disc_nodes == 0) {
- /* If we get here, there is nothing left to ADISC */
- /*
- * For NPIV, cmpl_reg_vpi will set port_state to READY,
- * and continue discovery.
- */
- if ((phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) &&
- !(vport->fc_flag & FC_RSCN_MODE)) {
- lpfc_issue_reg_vpi(phba, vport);
- goto out;
- }
- /*
- * For SLI2, we need to set port_state to READY
- * and continue discovery.
- */
- if (vport->port_state < LPFC_VPORT_READY) {
- /* If we get here, there is nothing to ADISC */
- if (vport->port_type == LPFC_PHYSICAL_PORT)
- lpfc_issue_clear_la(phba, vport);
-
- if (!(vport->fc_flag & FC_ABORT_DISCOVERY)) {
- vport->num_disc_nodes = 0;
- /* go thru NPR list, issue ELS PLOGIs */
- if (vport->fc_npr_cnt)
- lpfc_els_disc_plogi(vport);
-
- if (!vport->num_disc_nodes) {
- spin_lock_irq(shost->host_lock);
- vport->fc_flag &=
- ~FC_NDISC_ACTIVE;
- spin_unlock_irq(
- shost->host_lock);
- lpfc_can_disctmo(vport);
- }
- }
- vport->port_state = LPFC_VPORT_READY;
- } else {
- lpfc_rscn_disc(vport);
- }
- }
- }
out:
lpfc_els_free_iocb(phba, cmdiocb);
return;
}
+/**
+ * lpfc_issue_els_adisc - Issue an address discover iocb to an node on a vport
+ * @vport: pointer to a virtual N_Port data structure.
+ * @ndlp: pointer to a node-list data structure.
+ * @retry: number of retries to the command IOCB.
+ *
+ * This routine issues an Address Discover (ADISC) for an @ndlp on a
+ * @vport. It prepares the payload of the ADISC ELS command, updates the
+ * and states of the ndlp, and invokes the lpfc_sli_issue_iocb() routine
+ * to issue the ADISC ELS command.
+ *
+ * Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp
+ * will be incremented by 1 for holding the ndlp and the reference to ndlp
+ * will be stored into the context1 field of the IOCB for the completion
+ * callback function to the ADISC ELS command.
+ *
+ * Return code
+ * 0 - successfully issued adisc
+ * 1 - failed to issue adisc
+ **/
int
lpfc_issue_els_adisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
uint8_t retry)
ADISC *ap;
IOCB_t *icmd;
struct lpfc_iocbq *elsiocb;
- struct lpfc_sli *psli = &phba->sli;
- struct lpfc_sli_ring *pring = &psli->ring[LPFC_ELS_RING];
uint8_t *pcmd;
uint16_t cmdsize;
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag |= NLP_ADISC_SND;
spin_unlock_irq(shost->host_lock);
- if (lpfc_sli_issue_iocb(phba, pring, elsiocb, 0) == IOCB_ERROR) {
+ if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) ==
+ IOCB_ERROR) {
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag &= ~NLP_ADISC_SND;
spin_unlock_irq(shost->host_lock);
return 0;
}
+/**
+ * lpfc_cmpl_els_logo - Completion callback function for logo
+ * @phba: pointer to lpfc hba data structure.
+ * @cmdiocb: pointer to lpfc command iocb data structure.
+ * @rspiocb: pointer to lpfc response iocb data structure.
+ *
+ * This routine is the completion function for issuing the ELS Logout (LOGO)
+ * command. If no error status was reported from the LOGO response, the
+ * state machine of the associated ndlp shall be invoked for transition with
+ * respect to NLP_EVT_CMPL_LOGO event. Otherwise, if error status was reported,
+ * the lpfc_els_retry() routine will be invoked to retry the LOGO command.
+ **/
static void
lpfc_cmpl_els_logo(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
struct lpfc_iocbq *rspiocb)
return;
}
+/**
+ * lpfc_issue_els_logo - Issue a logo to an node on a vport
+ * @vport: pointer to a virtual N_Port data structure.
+ * @ndlp: pointer to a node-list data structure.
+ * @retry: number of retries to the command IOCB.
+ *
+ * This routine constructs and issues an ELS Logout (LOGO) iocb command
+ * to a remote node, referred by an @ndlp on a @vport. It constructs the
+ * payload of the IOCB, properly sets up the @ndlp state, and invokes the
+ * lpfc_sli_issue_iocb() routine to send out the LOGO ELS command.
+ *
+ * Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp
+ * will be incremented by 1 for holding the ndlp and the reference to ndlp
+ * will be stored into the context1 field of the IOCB for the completion
+ * callback function to the LOGO ELS command.
+ *
+ * Return code
+ * 0 - successfully issued logo
+ * 1 - failed to issue logo
+ **/
int
lpfc_issue_els_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
uint8_t retry)
struct lpfc_hba *phba = vport->phba;
IOCB_t *icmd;
struct lpfc_iocbq *elsiocb;
- struct lpfc_sli_ring *pring;
- struct lpfc_sli *psli;
uint8_t *pcmd;
uint16_t cmdsize;
int rc;
- psli = &phba->sli;
- pring = &psli->ring[LPFC_ELS_RING];
-
spin_lock_irq(shost->host_lock);
if (ndlp->nlp_flag & NLP_LOGO_SND) {
spin_unlock_irq(shost->host_lock);
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag |= NLP_LOGO_SND;
spin_unlock_irq(shost->host_lock);
- rc = lpfc_sli_issue_iocb(phba, pring, elsiocb, 0);
+ rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
if (rc == IOCB_ERROR) {
spin_lock_irq(shost->host_lock);
return 0;
}
+/**
+ * lpfc_cmpl_els_cmd - Completion callback function for generic els command
+ * @phba: pointer to lpfc hba data structure.
+ * @cmdiocb: pointer to lpfc command iocb data structure.
+ * @rspiocb: pointer to lpfc response iocb data structure.
+ *
+ * This routine is a generic completion callback function for ELS commands.
+ * Specifically, it is the callback function which does not need to perform
+ * any command specific operations. It is currently used by the ELS command
+ * issuing routines for the ELS State Change Request (SCR),
+ * lpfc_issue_els_scr(), and the ELS Fibre Channel Address Resolution
+ * Protocol Response (FARPR) routine, lpfc_issue_els_farpr(). Other than
+ * certain debug loggings, this callback function simply invokes the
+ * lpfc_els_chk_latt() routine to check whether link went down during the
+ * discovery process.
+ **/
static void
lpfc_cmpl_els_cmd(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
struct lpfc_iocbq *rspiocb)
return;
}
+/**
+ * lpfc_issue_els_scr - Issue a scr to an node on a vport
+ * @vport: pointer to a host virtual N_Port data structure.
+ * @nportid: N_Port identifier to the remote node.
+ * @retry: number of retries to the command IOCB.
+ *
+ * This routine issues a State Change Request (SCR) to a fabric node
+ * on a @vport. The remote node @nportid is passed into the function. It
+ * first search the @vport node list to find the matching ndlp. If no such
+ * ndlp is found, a new ndlp shall be created for this (SCR) purpose. An
+ * IOCB is allocated, payload prepared, and the lpfc_sli_issue_iocb()
+ * routine is invoked to send the SCR IOCB.
+ *
+ * Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp
+ * will be incremented by 1 for holding the ndlp and the reference to ndlp
+ * will be stored into the context1 field of the IOCB for the completion
+ * callback function to the SCR ELS command.
+ *
+ * Return code
+ * 0 - Successfully issued scr command
+ * 1 - Failed to issue scr command
+ **/
int
lpfc_issue_els_scr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry)
{
struct lpfc_hba *phba = vport->phba;
IOCB_t *icmd;
struct lpfc_iocbq *elsiocb;
- struct lpfc_sli_ring *pring;
struct lpfc_sli *psli;
uint8_t *pcmd;
uint16_t cmdsize;
struct lpfc_nodelist *ndlp;
psli = &phba->sli;
- pring = &psli->ring[LPFC_ELS_RING]; /* ELS ring */
cmdsize = (sizeof(uint32_t) + sizeof(SCR));
ndlp = lpfc_findnode_did(vport, nportid);
phba->fc_stat.elsXmitSCR++;
elsiocb->iocb_cmpl = lpfc_cmpl_els_cmd;
- if (lpfc_sli_issue_iocb(phba, pring, elsiocb, 0) == IOCB_ERROR) {
+ if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) ==
+ IOCB_ERROR) {
/* The additional lpfc_nlp_put will cause the following
* lpfc_els_free_iocb routine to trigger the rlease of
* the node.
return 0;
}
+/**
+ * lpfc_issue_els_farpr - Issue a farp to an node on a vport
+ * @vport: pointer to a host virtual N_Port data structure.
+ * @nportid: N_Port identifier to the remote node.
+ * @retry: number of retries to the command IOCB.
+ *
+ * This routine issues a Fibre Channel Address Resolution Response
+ * (FARPR) to a node on a vport. The remote node N_Port identifier (@nportid)
+ * is passed into the function. It first search the @vport node list to find
+ * the matching ndlp. If no such ndlp is found, a new ndlp shall be created
+ * for this (FARPR) purpose. An IOCB is allocated, payload prepared, and the
+ * lpfc_sli_issue_iocb() routine is invoked to send the FARPR ELS command.
+ *
+ * Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp
+ * will be incremented by 1 for holding the ndlp and the reference to ndlp
+ * will be stored into the context1 field of the IOCB for the completion
+ * callback function to the PARPR ELS command.
+ *
+ * Return code
+ * 0 - Successfully issued farpr command
+ * 1 - Failed to issue farpr command
+ **/
static int
lpfc_issue_els_farpr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry)
{
struct lpfc_hba *phba = vport->phba;
IOCB_t *icmd;
struct lpfc_iocbq *elsiocb;
- struct lpfc_sli_ring *pring;
struct lpfc_sli *psli;
FARP *fp;
uint8_t *pcmd;
struct lpfc_nodelist *ndlp;
psli = &phba->sli;
- pring = &psli->ring[LPFC_ELS_RING]; /* ELS ring */
cmdsize = (sizeof(uint32_t) + sizeof(FARP));
ndlp = lpfc_findnode_did(vport, nportid);
phba->fc_stat.elsXmitFARPR++;
elsiocb->iocb_cmpl = lpfc_cmpl_els_cmd;
- if (lpfc_sli_issue_iocb(phba, pring, elsiocb, 0) == IOCB_ERROR) {
+ if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) ==
+ IOCB_ERROR) {
/* The additional lpfc_nlp_put will cause the following
* lpfc_els_free_iocb routine to trigger the release of
* the node.
return 0;
}
+/**
+ * lpfc_cancel_retry_delay_tmo - Cancel the timer with delayed iocb-cmd retry
+ * @vport: pointer to a host virtual N_Port data structure.
+ * @nlp: pointer to a node-list data structure.
+ *
+ * This routine cancels the timer with a delayed IOCB-command retry for
+ * a @vport's @ndlp. It stops the timer for the delayed function retrial and
+ * removes the ELS retry event if it presents. In addition, if the
+ * NLP_NPR_2B_DISC bit is set in the @nlp's nlp_flag bitmap, ADISC IOCB
+ * commands are sent for the @vport's nodes that require issuing discovery
+ * ADISC.
+ **/
void
lpfc_cancel_retry_delay_tmo(struct lpfc_vport *vport, struct lpfc_nodelist *nlp)
{
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
struct lpfc_work_evt *evtp;
+ if (!(nlp->nlp_flag & NLP_DELAY_TMO))
+ return;
spin_lock_irq(shost->host_lock);
nlp->nlp_flag &= ~NLP_DELAY_TMO;
spin_unlock_irq(shost->host_lock);
del_timer_sync(&nlp->nlp_delayfunc);
nlp->nlp_last_elscmd = 0;
-
if (!list_empty(&nlp->els_retry_evt.evt_listp)) {
list_del_init(&nlp->els_retry_evt.evt_listp);
/* Decrement nlp reference count held for the delayed retry */
evtp = &nlp->els_retry_evt;
lpfc_nlp_put((struct lpfc_nodelist *)evtp->evt_arg1);
}
-
if (nlp->nlp_flag & NLP_NPR_2B_DISC) {
spin_lock_irq(shost->host_lock);
nlp->nlp_flag &= ~NLP_NPR_2B_DISC;
spin_unlock_irq(shost->host_lock);
if (vport->num_disc_nodes) {
- /* Check to see if there are more
- * PLOGIs to be sent
- */
- lpfc_more_plogi(vport);
-
- if (vport->num_disc_nodes == 0) {
- spin_lock_irq(shost->host_lock);
- vport->fc_flag &= ~FC_NDISC_ACTIVE;
- spin_unlock_irq(shost->host_lock);
- lpfc_can_disctmo(vport);
- lpfc_end_rscn(vport);
+ if (vport->port_state < LPFC_VPORT_READY) {
+ /* Check if there are more ADISCs to be sent */
+ lpfc_more_adisc(vport);
+ } else {
+ /* Check if there are more PLOGIs to be sent */
+ lpfc_more_plogi(vport);
+ if (vport->num_disc_nodes == 0) {
+ spin_lock_irq(shost->host_lock);
+ vport->fc_flag &= ~FC_NDISC_ACTIVE;
+ spin_unlock_irq(shost->host_lock);
+ lpfc_can_disctmo(vport);
+ lpfc_end_rscn(vport);
+ }
}
}
}
return;
}
+/**
+ * lpfc_els_retry_delay - Timer function with a ndlp delayed function timer
+ * @ptr: holder for the pointer to the timer function associated data (ndlp).
+ *
+ * This routine is invoked by the ndlp delayed-function timer to check
+ * whether there is any pending ELS retry event(s) with the node. If not, it
+ * simply returns. Otherwise, if there is at least one ELS delayed event, it
+ * adds the delayed events to the HBA work list and invokes the
+ * lpfc_worker_wake_up() routine to wake up worker thread to process the
+ * event. Note that lpfc_nlp_get() is called before posting the event to
+ * the work list to hold reference count of ndlp so that it guarantees the
+ * reference to ndlp will still be available when the worker thread gets
+ * to the event associated with the ndlp.
+ **/
void
lpfc_els_retry_delay(unsigned long ptr)
{
unsigned long flags;
struct lpfc_work_evt *evtp = &ndlp->els_retry_evt;
- ndlp = (struct lpfc_nodelist *) ptr;
- phba = ndlp->vport->phba;
- evtp = &ndlp->els_retry_evt;
-
spin_lock_irqsave(&phba->hbalock, flags);
if (!list_empty(&evtp->evt_listp)) {
spin_unlock_irqrestore(&phba->hbalock, flags);
* count until the queued work is done
*/
evtp->evt_arg1 = lpfc_nlp_get(ndlp);
- evtp->evt = LPFC_EVT_ELS_RETRY;
- list_add_tail(&evtp->evt_listp, &phba->work_list);
- if (phba->work_wait)
+ if (evtp->evt_arg1) {
+ evtp->evt = LPFC_EVT_ELS_RETRY;
+ list_add_tail(&evtp->evt_listp, &phba->work_list);
lpfc_worker_wake_up(phba);
-
+ }
spin_unlock_irqrestore(&phba->hbalock, flags);
return;
}
+/**
+ * lpfc_els_retry_delay_handler - Work thread handler for ndlp delayed function
+ * @ndlp: pointer to a node-list data structure.
+ *
+ * This routine is the worker-thread handler for processing the @ndlp delayed
+ * event(s), posted by the lpfc_els_retry_delay() routine. It simply retrieves
+ * the last ELS command from the associated ndlp and invokes the proper ELS
+ * function according to the delayed ELS command to retry the command.
+ **/
void
lpfc_els_retry_delay_handler(struct lpfc_nodelist *ndlp)
{
return;
}
+/**
+ * lpfc_els_retry - Make retry decision on an els command iocb
+ * @phba: pointer to lpfc hba data structure.
+ * @cmdiocb: pointer to lpfc command iocb data structure.
+ * @rspiocb: pointer to lpfc response iocb data structure.
+ *
+ * This routine makes a retry decision on an ELS command IOCB, which has
+ * failed. The following ELS IOCBs use this function for retrying the command
+ * when previously issued command responsed with error status: FLOGI, PLOGI,
+ * PRLI, ADISC, LOGO, and FDISC. Based on the ELS command type and the
+ * returned error status, it makes the decision whether a retry shall be
+ * issued for the command, and whether a retry shall be made immediately or
+ * delayed. In the former case, the corresponding ELS command issuing-function
+ * is called to retry the command. In the later case, the ELS command shall
+ * be posted to the ndlp delayed event and delayed function timer set to the
+ * ndlp for the delayed command issusing.
+ *
+ * Return code
+ * 0 - No retry of els command is made
+ * 1 - Immediate or delayed retry of els command is made
+ **/
static int
lpfc_els_retry(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
struct lpfc_iocbq *rspiocb)
case IOSTAT_LOCAL_REJECT:
switch ((irsp->un.ulpWord[4] & 0xff)) {
case IOERR_LOOP_OPEN_FAILURE:
+ if (cmd == ELS_CMD_FLOGI) {
+ if (PCI_DEVICE_ID_HORNET ==
+ phba->pcidev->device) {
+ phba->fc_topology = TOPOLOGY_LOOP;
+ phba->pport->fc_myDID = 0;
+ phba->alpa_map[0] = 0;
+ phba->alpa_map[1] = 0;
+ }
+ }
if (cmd == ELS_CMD_PLOGI && cmdiocb->retry == 0)
delay = 1000;
retry = 1;
(stat.un.b.lsRjtRsnCodeExp == LSEXP_INVALID_NPORT_ID))
) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
- "0123 FDISC Failed (x%x). "
+ "0122 FDISC Failed (x%x). "
"Fabric Detected Bad WWN\n",
stat.un.lsRjtError);
lpfc_vport_set_state(vport,
}
phba->fc_stat.elsXmitRetry++;
- if (ndlp && delay) {
+ if (ndlp && NLP_CHK_NODE_ACT(ndlp) && delay) {
phba->fc_stat.elsDelayRetry++;
ndlp->nlp_retry = cmdiocb->retry;
lpfc_issue_els_fdisc(vport, ndlp, cmdiocb->retry);
return 1;
case ELS_CMD_PLOGI:
- if (ndlp) {
+ if (ndlp && NLP_CHK_NODE_ACT(ndlp)) {
ndlp->nlp_prev_state = ndlp->nlp_state;
lpfc_nlp_set_state(vport, ndlp,
NLP_STE_PLOGI_ISSUE);
return 0;
}
+/**
+ * lpfc_els_free_data - Free lpfc dma buffer and data structure with an iocb
+ * @phba: pointer to lpfc hba data structure.
+ * @buf_ptr1: pointer to the lpfc DMA buffer data structure.
+ *
+ * This routine releases the lpfc DMA (Direct Memory Access) buffer(s)
+ * associated with a command IOCB back to the lpfc DMA buffer pool. It first
+ * checks to see whether there is a lpfc DMA buffer associated with the
+ * response of the command IOCB. If so, it will be released before releasing
+ * the lpfc DMA buffer associated with the IOCB itself.
+ *
+ * Return code
+ * 0 - Successfully released lpfc DMA buffer (currently, always return 0)
+ **/
static int
lpfc_els_free_data(struct lpfc_hba *phba, struct lpfc_dmabuf *buf_ptr1)
{
struct lpfc_dmabuf *buf_ptr;
- /* Free the response before processing the command. */
+ /* Free the response before processing the command. */
if (!list_empty(&buf_ptr1->list)) {
list_remove_head(&buf_ptr1->list, buf_ptr,
struct lpfc_dmabuf,
return 0;
}
+/**
+ * lpfc_els_free_bpl - Free lpfc dma buffer and data structure with bpl
+ * @phba: pointer to lpfc hba data structure.
+ * @buf_ptr: pointer to the lpfc dma buffer data structure.
+ *
+ * This routine releases the lpfc Direct Memory Access (DMA) buffer
+ * associated with a Buffer Pointer List (BPL) back to the lpfc DMA buffer
+ * pool.
+ *
+ * Return code
+ * 0 - Successfully released lpfc DMA buffer (currently, always return 0)
+ **/
static int
lpfc_els_free_bpl(struct lpfc_hba *phba, struct lpfc_dmabuf *buf_ptr)
{
return 0;
}
+/**
+ * lpfc_els_free_iocb - Free a command iocb and its associated resources
+ * @phba: pointer to lpfc hba data structure.
+ * @elsiocb: pointer to lpfc els command iocb data structure.
+ *
+ * This routine frees a command IOCB and its associated resources. The
+ * command IOCB data structure contains the reference to various associated
+ * resources, these fields must be set to NULL if the associated reference
+ * not present:
+ * context1 - reference to ndlp
+ * context2 - reference to cmd
+ * context2->next - reference to rsp
+ * context3 - reference to bpl
+ *
+ * It first properly decrements the reference count held on ndlp for the
+ * IOCB completion callback function. If LPFC_DELAY_MEM_FREE flag is not
+ * set, it invokes the lpfc_els_free_data() routine to release the Direct
+ * Memory Access (DMA) buffers associated with the IOCB. Otherwise, it
+ * adds the DMA buffer the @phba data structure for the delayed release.
+ * If reference to the Buffer Pointer List (BPL) is present, the
+ * lpfc_els_free_bpl() routine is invoked to release the DMA memory
+ * associated with BPL. Finally, the lpfc_sli_release_iocbq() routine is
+ * invoked to release the IOCB data structure back to @phba IOCBQ list.
+ *
+ * Return code
+ * 0 - Success (currently, always return 0)
+ **/
int
lpfc_els_free_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *elsiocb)
{
return 0;
}
+/**
+ * lpfc_cmpl_els_logo_acc - Completion callback function to logo acc response
+ * @phba: pointer to lpfc hba data structure.
+ * @cmdiocb: pointer to lpfc command iocb data structure.
+ * @rspiocb: pointer to lpfc response iocb data structure.
+ *
+ * This routine is the completion callback function to the Logout (LOGO)
+ * Accept (ACC) Response ELS command. This routine is invoked to indicate
+ * the completion of the LOGO process. It invokes the lpfc_nlp_not_used() to
+ * release the ndlp if it has the last reference remaining (reference count
+ * is 1). If succeeded (meaning ndlp released), it sets the IOCB context1
+ * field to NULL to inform the following lpfc_els_free_iocb() routine no
+ * ndlp reference count needs to be decremented. Otherwise, the ndlp
+ * reference use-count shall be decremented by the lpfc_els_free_iocb()
+ * routine. Finally, the lpfc_els_free_iocb() is invoked to release the
+ * IOCB data structure.
+ **/
static void
lpfc_cmpl_els_logo_acc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
struct lpfc_iocbq *rspiocb)
return;
}
+/**
+ * lpfc_mbx_cmpl_dflt_rpi - Completion callbk func for unreg dflt rpi mbox cmd
+ * @phba: pointer to lpfc hba data structure.
+ * @pmb: pointer to the driver internal queue element for mailbox command.
+ *
+ * This routine is the completion callback function for unregister default
+ * RPI (Remote Port Index) mailbox command to the @phba. It simply releases
+ * the associated lpfc Direct Memory Access (DMA) buffer back to the pool and
+ * decrements the ndlp reference count held for this completion callback
+ * function. After that, it invokes the lpfc_nlp_not_used() to check
+ * whether there is only one reference left on the ndlp. If so, it will
+ * perform one more decrement and trigger the release of the ndlp.
+ **/
void
lpfc_mbx_cmpl_dflt_rpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
{
struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1);
struct lpfc_nodelist *ndlp = (struct lpfc_nodelist *) pmb->context2;
+ /*
+ * This routine is used to register and unregister in previous SLI
+ * modes.
+ */
+ if ((pmb->u.mb.mbxCommand == MBX_UNREG_LOGIN) &&
+ (phba->sli_rev == LPFC_SLI_REV4))
+ lpfc_sli4_free_rpi(phba, pmb->u.mb.un.varUnregLogin.rpi);
+
pmb->context1 = NULL;
lpfc_mbuf_free(phba, mp->virt, mp->phys);
kfree(mp);
mempool_free(pmb, phba->mbox_mem_pool);
- if (ndlp) {
+ if (ndlp && NLP_CHK_NODE_ACT(ndlp)) {
lpfc_nlp_put(ndlp);
/* This is the end of the default RPI cleanup logic for this
* ndlp. If no other discovery threads are using this ndlp.
*/
lpfc_nlp_not_used(ndlp);
}
+
return;
}
+/**
+ * lpfc_cmpl_els_rsp - Completion callback function for els response iocb cmd
+ * @phba: pointer to lpfc hba data structure.
+ * @cmdiocb: pointer to lpfc command iocb data structure.
+ * @rspiocb: pointer to lpfc response iocb data structure.
+ *
+ * This routine is the completion callback function for ELS Response IOCB
+ * command. In normal case, this callback function just properly sets the
+ * nlp_flag bitmap in the ndlp data structure, if the mbox command reference
+ * field in the command IOCB is not NULL, the referred mailbox command will
+ * be send out, and then invokes the lpfc_els_free_iocb() routine to release
+ * the IOCB. Under error conditions, such as when a LS_RJT is returned or a
+ * link down event occurred during the discovery, the lpfc_nlp_not_used()
+ * routine shall be invoked trying to release the ndlp if no other threads
+ * are currently referring it.
+ **/
static void
lpfc_cmpl_els_rsp(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
struct lpfc_iocbq *rspiocb)
* function can have cmdiocb->contest1 (ndlp) field set to NULL.
*/
pcmd = (uint8_t *) (((struct lpfc_dmabuf *) cmdiocb->context2)->virt);
- if (ndlp && (*((uint32_t *) (pcmd)) == ELS_CMD_LS_RJT)) {
+ if (ndlp && NLP_CHK_NODE_ACT(ndlp) &&
+ (*((uint32_t *) (pcmd)) == ELS_CMD_LS_RJT)) {
/* A LS_RJT associated with Default RPI cleanup has its own
* seperate code path.
*/
}
/* Check to see if link went down during discovery */
- if (!ndlp || lpfc_els_chk_latt(vport)) {
+ if (!ndlp || !NLP_CHK_NODE_ACT(ndlp) || lpfc_els_chk_latt(vport)) {
if (mbox) {
mp = (struct lpfc_dmabuf *) mbox->context1;
if (mp) {
}
mempool_free(mbox, phba->mbox_mem_pool);
}
- if (ndlp && (ndlp->nlp_flag & NLP_RM_DFLT_RPI))
+ if (ndlp && NLP_CHK_NODE_ACT(ndlp) &&
+ (ndlp->nlp_flag & NLP_RM_DFLT_RPI))
if (lpfc_nlp_not_used(ndlp)) {
ndlp = NULL;
/* Indicate the node has already released,
mempool_free(mbox, phba->mbox_mem_pool);
}
out:
- if (ndlp) {
+ if (ndlp && NLP_CHK_NODE_ACT(ndlp)) {
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag &= ~(NLP_ACC_REGLOGIN | NLP_RM_DFLT_RPI);
spin_unlock_irq(shost->host_lock);
return;
}
+/**
+ * lpfc_els_rsp_acc - Prepare and issue an acc response iocb command
+ * @vport: pointer to a host virtual N_Port data structure.
+ * @flag: the els command code to be accepted.
+ * @oldiocb: pointer to the original lpfc command iocb data structure.
+ * @ndlp: pointer to a node-list data structure.
+ * @mbox: pointer to the driver internal queue element for mailbox command.
+ *
+ * This routine prepares and issues an Accept (ACC) response IOCB
+ * command. It uses the @flag to properly set up the IOCB field for the
+ * specific ACC response command to be issued and invokes the
+ * lpfc_sli_issue_iocb() routine to send out ACC response IOCB. If a
+ * @mbox pointer is passed in, it will be put into the context_un.mbox
+ * field of the IOCB for the completion callback function to issue the
+ * mailbox command to the HBA later when callback is invoked.
+ *
+ * Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp
+ * will be incremented by 1 for holding the ndlp and the reference to ndlp
+ * will be stored into the context1 field of the IOCB for the completion
+ * callback function to the corresponding response ELS IOCB command.
+ *
+ * Return code
+ * 0 - Successfully issued acc response
+ * 1 - Failed to issue acc response
+ **/
int
lpfc_els_rsp_acc(struct lpfc_vport *vport, uint32_t flag,
struct lpfc_iocbq *oldiocb, struct lpfc_nodelist *ndlp,
IOCB_t *icmd;
IOCB_t *oldcmd;
struct lpfc_iocbq *elsiocb;
- struct lpfc_sli_ring *pring;
struct lpfc_sli *psli;
uint8_t *pcmd;
uint16_t cmdsize;
ELS_PKT *els_pkt_ptr;
psli = &phba->sli;
- pring = &psli->ring[LPFC_ELS_RING]; /* ELS ring */
oldcmd = &oldiocb->iocb;
switch (flag) {
}
phba->fc_stat.elsXmitACC++;
- rc = lpfc_sli_issue_iocb(phba, pring, elsiocb, 0);
+ rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
if (rc == IOCB_ERROR) {
lpfc_els_free_iocb(phba, elsiocb);
return 1;
return 0;
}
+/**
+ * lpfc_els_rsp_reject - Propare and issue a rjt response iocb command
+ * @vport: pointer to a virtual N_Port data structure.
+ * @rejectError:
+ * @oldiocb: pointer to the original lpfc command iocb data structure.
+ * @ndlp: pointer to a node-list data structure.
+ * @mbox: pointer to the driver internal queue element for mailbox command.
+ *
+ * This routine prepares and issue an Reject (RJT) response IOCB
+ * command. If a @mbox pointer is passed in, it will be put into the
+ * context_un.mbox field of the IOCB for the completion callback function
+ * to issue to the HBA later.
+ *
+ * Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp
+ * will be incremented by 1 for holding the ndlp and the reference to ndlp
+ * will be stored into the context1 field of the IOCB for the completion
+ * callback function to the reject response ELS IOCB command.
+ *
+ * Return code
+ * 0 - Successfully issued reject response
+ * 1 - Failed to issue reject response
+ **/
int
lpfc_els_rsp_reject(struct lpfc_vport *vport, uint32_t rejectError,
struct lpfc_iocbq *oldiocb, struct lpfc_nodelist *ndlp,
IOCB_t *icmd;
IOCB_t *oldcmd;
struct lpfc_iocbq *elsiocb;
- struct lpfc_sli_ring *pring;
struct lpfc_sli *psli;
uint8_t *pcmd;
uint16_t cmdsize;
int rc;
psli = &phba->sli;
- pring = &psli->ring[LPFC_ELS_RING]; /* ELS ring */
-
cmdsize = 2 * sizeof(uint32_t);
elsiocb = lpfc_prep_els_iocb(vport, 0, cmdsize, oldiocb->retry, ndlp,
ndlp->nlp_DID, ELS_CMD_LS_RJT);
phba->fc_stat.elsXmitLSRJT++;
elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
- rc = lpfc_sli_issue_iocb(phba, pring, elsiocb, 0);
+ rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
if (rc == IOCB_ERROR) {
lpfc_els_free_iocb(phba, elsiocb);
return 0;
}
+/**
+ * lpfc_els_rsp_adisc_acc - Prepare and issue acc response to adisc iocb cmd
+ * @vport: pointer to a virtual N_Port data structure.
+ * @oldiocb: pointer to the original lpfc command iocb data structure.
+ * @ndlp: pointer to a node-list data structure.
+ *
+ * This routine prepares and issues an Accept (ACC) response to Address
+ * Discover (ADISC) ELS command. It simply prepares the payload of the IOCB
+ * and invokes the lpfc_sli_issue_iocb() routine to send out the command.
+ *
+ * Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp
+ * will be incremented by 1 for holding the ndlp and the reference to ndlp
+ * will be stored into the context1 field of the IOCB for the completion
+ * callback function to the ADISC Accept response ELS IOCB command.
+ *
+ * Return code
+ * 0 - Successfully issued acc adisc response
+ * 1 - Failed to issue adisc acc response
+ **/
int
lpfc_els_rsp_adisc_acc(struct lpfc_vport *vport, struct lpfc_iocbq *oldiocb,
struct lpfc_nodelist *ndlp)
{
struct lpfc_hba *phba = vport->phba;
- struct lpfc_sli *psli = &phba->sli;
- struct lpfc_sli_ring *pring = &psli->ring[LPFC_ELS_RING];
ADISC *ap;
IOCB_t *icmd, *oldcmd;
struct lpfc_iocbq *elsiocb;
phba->fc_stat.elsXmitACC++;
elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
- rc = lpfc_sli_issue_iocb(phba, pring, elsiocb, 0);
+ rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
if (rc == IOCB_ERROR) {
lpfc_els_free_iocb(phba, elsiocb);
return 1;
return 0;
}
+/**
+ * lpfc_els_rsp_prli_acc - Prepare and issue acc response to prli iocb cmd
+ * @vport: pointer to a virtual N_Port data structure.
+ * @oldiocb: pointer to the original lpfc command iocb data structure.
+ * @ndlp: pointer to a node-list data structure.
+ *
+ * This routine prepares and issues an Accept (ACC) response to Process
+ * Login (PRLI) ELS command. It simply prepares the payload of the IOCB
+ * and invokes the lpfc_sli_issue_iocb() routine to send out the command.
+ *
+ * Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp
+ * will be incremented by 1 for holding the ndlp and the reference to ndlp
+ * will be stored into the context1 field of the IOCB for the completion
+ * callback function to the PRLI Accept response ELS IOCB command.
+ *
+ * Return code
+ * 0 - Successfully issued acc prli response
+ * 1 - Failed to issue acc prli response
+ **/
int
lpfc_els_rsp_prli_acc(struct lpfc_vport *vport, struct lpfc_iocbq *oldiocb,
struct lpfc_nodelist *ndlp)
IOCB_t *icmd;
IOCB_t *oldcmd;
struct lpfc_iocbq *elsiocb;
- struct lpfc_sli_ring *pring;
struct lpfc_sli *psli;
uint8_t *pcmd;
uint16_t cmdsize;
int rc;
psli = &phba->sli;
- pring = &psli->ring[LPFC_ELS_RING]; /* ELS ring */
cmdsize = sizeof(uint32_t) + sizeof(PRLI);
elsiocb = lpfc_prep_els_iocb(vport, 0, cmdsize, oldiocb->retry, ndlp,
npr = (PRLI *) pcmd;
vpd = &phba->vpd;
/*
- * If our firmware version is 3.20 or later,
- * set the following bits for FC-TAPE support.
+ * If the remote port is a target and our firmware version is 3.20 or
+ * later, set the following bits for FC-TAPE support.
*/
- if (vpd->rev.feaLevelHigh >= 0x02) {
+ if ((ndlp->nlp_type & NLP_FCP_TARGET) &&
+ (vpd->rev.feaLevelHigh >= 0x02)) {
npr->ConfmComplAllowed = 1;
npr->Retry = 1;
npr->TaskRetryIdReq = 1;
phba->fc_stat.elsXmitACC++;
elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
- rc = lpfc_sli_issue_iocb(phba, pring, elsiocb, 0);
+ rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
if (rc == IOCB_ERROR) {
lpfc_els_free_iocb(phba, elsiocb);
return 1;
return 0;
}
+/**
+ * lpfc_els_rsp_rnid_acc - Issue rnid acc response iocb command
+ * @vport: pointer to a virtual N_Port data structure.
+ * @format: rnid command format.
+ * @oldiocb: pointer to the original lpfc command iocb data structure.
+ * @ndlp: pointer to a node-list data structure.
+ *
+ * This routine issues a Request Node Identification Data (RNID) Accept
+ * (ACC) response. It constructs the RNID ACC response command according to
+ * the proper @format and then calls the lpfc_sli_issue_iocb() routine to
+ * issue the response. Note that this command does not need to hold the ndlp
+ * reference count for the callback. So, the ndlp reference count taken by
+ * the lpfc_prep_els_iocb() routine is put back and the context1 field of
+ * IOCB is set to NULL to indicate to the lpfc_els_free_iocb() routine that
+ * there is no ndlp reference available.
+ *
+ * Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp
+ * will be incremented by 1 for holding the ndlp and the reference to ndlp
+ * will be stored into the context1 field of the IOCB for the completion
+ * callback function. However, for the RNID Accept Response ELS command,
+ * this is undone later by this routine after the IOCB is allocated.
+ *
+ * Return code
+ * 0 - Successfully issued acc rnid response
+ * 1 - Failed to issue acc rnid response
+ **/
static int
lpfc_els_rsp_rnid_acc(struct lpfc_vport *vport, uint8_t format,
struct lpfc_iocbq *oldiocb, struct lpfc_nodelist *ndlp)
RNID *rn;
IOCB_t *icmd, *oldcmd;
struct lpfc_iocbq *elsiocb;
- struct lpfc_sli_ring *pring;
struct lpfc_sli *psli;
uint8_t *pcmd;
uint16_t cmdsize;
int rc;
psli = &phba->sli;
- pring = &psli->ring[LPFC_ELS_RING];
-
cmdsize = sizeof(uint32_t) + sizeof(uint32_t)
+ (2 * sizeof(struct lpfc_name));
if (format)
elsiocb->context1 = NULL; /* Don't need ndlp for cmpl,
* it could be freed */
- rc = lpfc_sli_issue_iocb(phba, pring, elsiocb, 0);
+ rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
if (rc == IOCB_ERROR) {
lpfc_els_free_iocb(phba, elsiocb);
return 1;
return 0;
}
+/**
+ * lpfc_els_disc_adisc - Issue remaining adisc iocbs to npr nodes of a vport
+ * @vport: pointer to a host virtual N_Port data structure.
+ *
+ * This routine issues Address Discover (ADISC) ELS commands to those
+ * N_Ports which are in node port recovery state and ADISC has not been issued
+ * for the @vport. Each time an ELS ADISC IOCB is issued by invoking the
+ * lpfc_issue_els_adisc() routine, the per @vport number of discover count
+ * (num_disc_nodes) shall be incremented. If the num_disc_nodes reaches a
+ * pre-configured threshold (cfg_discovery_threads), the @vport fc_flag will
+ * be marked with FC_NLP_MORE bit and the process of issuing remaining ADISC
+ * IOCBs quit for later pick up. On the other hand, after walking through
+ * all the ndlps with the @vport and there is none ADISC IOCB issued, the
+ * @vport fc_flag shall be cleared with FC_NLP_MORE bit indicating there is
+ * no more ADISC need to be sent.
+ *
+ * Return code
+ * The number of N_Ports with adisc issued.
+ **/
int
lpfc_els_disc_adisc(struct lpfc_vport *vport)
{
return sentadisc;
}
+/**
+ * lpfc_els_disc_plogi - Issue plogi for all npr nodes of a vport before adisc
+ * @vport: pointer to a host virtual N_Port data structure.
+ *
+ * This routine issues Port Login (PLOGI) ELS commands to all the N_Ports
+ * which are in node port recovery state, with a @vport. Each time an ELS
+ * ADISC PLOGI IOCB is issued by invoking the lpfc_issue_els_plogi() routine,
+ * the per @vport number of discover count (num_disc_nodes) shall be
+ * incremented. If the num_disc_nodes reaches a pre-configured threshold
+ * (cfg_discovery_threads), the @vport fc_flag will be marked with FC_NLP_MORE
+ * bit set and quit the process of issuing remaining ADISC PLOGIN IOCBs for
+ * later pick up. On the other hand, after walking through all the ndlps with
+ * the @vport and there is none ADISC PLOGI IOCB issued, the @vport fc_flag
+ * shall be cleared with the FC_NLP_MORE bit indicating there is no more ADISC
+ * PLOGI need to be sent.
+ *
+ * Return code
+ * The number of N_Ports with plogi issued.
+ **/
int
lpfc_els_disc_plogi(struct lpfc_vport *vport)
{
return sentplogi;
}
+/**
+ * lpfc_els_flush_rscn - Clean up any rscn activities with a vport
+ * @vport: pointer to a host virtual N_Port data structure.
+ *
+ * This routine cleans up any Registration State Change Notification
+ * (RSCN) activity with a @vport. Note that the fc_rscn_flush flag of the
+ * @vport together with the host_lock is used to prevent multiple thread
+ * trying to access the RSCN array on a same @vport at the same time.
+ **/
void
lpfc_els_flush_rscn(struct lpfc_vport *vport)
{
vport->fc_rscn_flush = 0;
}
+/**
+ * lpfc_rscn_payload_check - Check whether there is a pending rscn to a did
+ * @vport: pointer to a host virtual N_Port data structure.
+ * @did: remote destination port identifier.
+ *
+ * This routine checks whether there is any pending Registration State
+ * Configuration Notification (RSCN) to a @did on @vport.
+ *
+ * Return code
+ * None zero - The @did matched with a pending rscn
+ * 0 - not able to match @did with a pending rscn
+ **/
int
lpfc_rscn_payload_check(struct lpfc_vport *vport, uint32_t did)
{
while (payload_len) {
rscn_did.un.word = be32_to_cpu(*lp++);
payload_len -= sizeof(uint32_t);
- switch (rscn_did.un.b.resv) {
- case 0: /* Single N_Port ID effected */
- if (ns_did.un.word == rscn_did.un.word)
+ switch (rscn_did.un.b.resv & RSCN_ADDRESS_FORMAT_MASK) {
+ case RSCN_ADDRESS_FORMAT_PORT:
+ if ((ns_did.un.b.domain == rscn_did.un.b.domain)
+ && (ns_did.un.b.area == rscn_did.un.b.area)
+ && (ns_did.un.b.id == rscn_did.un.b.id))
goto return_did_out;
break;
- case 1: /* Whole N_Port Area effected */
+ case RSCN_ADDRESS_FORMAT_AREA:
if ((ns_did.un.b.domain == rscn_did.un.b.domain)
&& (ns_did.un.b.area == rscn_did.un.b.area))
goto return_did_out;
break;
- case 2: /* Whole N_Port Domain effected */
+ case RSCN_ADDRESS_FORMAT_DOMAIN:
if (ns_did.un.b.domain == rscn_did.un.b.domain)
goto return_did_out;
break;
- default:
- /* Unknown Identifier in RSCN node */
- lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
- "0217 Unknown Identifier in "
- "RSCN payload Data: x%x\n",
- rscn_did.un.word);
- case 3: /* Whole Fabric effected */
+ case RSCN_ADDRESS_FORMAT_FABRIC:
goto return_did_out;
}
}
return did;
}
+/**
+ * lpfc_rscn_recovery_check - Send recovery event to vport nodes matching rscn
+ * @vport: pointer to a host virtual N_Port data structure.
+ *
+ * This routine sends recovery (NLP_EVT_DEVICE_RECOVERY) event to the
+ * state machine for a @vport's nodes that are with pending RSCN (Registration
+ * State Change Notification).
+ *
+ * Return code
+ * 0 - Successful (currently alway return 0)
+ **/
static int
lpfc_rscn_recovery_check(struct lpfc_vport *vport)
{
struct lpfc_nodelist *ndlp = NULL;
- /* Look at all nodes effected by pending RSCNs and move
- * them to NPR state.
- */
-
+ /* Move all affected nodes by pending RSCNs to NPR state. */
list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) {
if (!NLP_CHK_NODE_ACT(ndlp) ||
- ndlp->nlp_state == NLP_STE_UNUSED_NODE ||
- lpfc_rscn_payload_check(vport, ndlp->nlp_DID) == 0)
+ (ndlp->nlp_state == NLP_STE_UNUSED_NODE) ||
+ !lpfc_rscn_payload_check(vport, ndlp->nlp_DID))
continue;
-
lpfc_disc_state_machine(vport, ndlp, NULL,
- NLP_EVT_DEVICE_RECOVERY);
+ NLP_EVT_DEVICE_RECOVERY);
+ lpfc_cancel_retry_delay_tmo(vport, ndlp);
+ }
+ return 0;
+}
- /*
- * Make sure NLP_DELAY_TMO is NOT running after a device
- * recovery event.
- */
- if (ndlp->nlp_flag & NLP_DELAY_TMO)
- lpfc_cancel_retry_delay_tmo(vport, ndlp);
+/**
+ * lpfc_send_rscn_event - Send an RSCN event to management application
+ * @vport: pointer to a host virtual N_Port data structure.
+ * @cmdiocb: pointer to lpfc command iocb data structure.
+ *
+ * lpfc_send_rscn_event sends an RSCN netlink event to management
+ * applications.
+ */
+static void
+lpfc_send_rscn_event(struct lpfc_vport *vport,
+ struct lpfc_iocbq *cmdiocb)
+{
+ struct lpfc_dmabuf *pcmd;
+ struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
+ uint32_t *payload_ptr;
+ uint32_t payload_len;
+ struct lpfc_rscn_event_header *rscn_event_data;
+
+ pcmd = (struct lpfc_dmabuf *) cmdiocb->context2;
+ payload_ptr = (uint32_t *) pcmd->virt;
+ payload_len = be32_to_cpu(*payload_ptr & ~ELS_CMD_MASK);
+
+ rscn_event_data = kmalloc(sizeof(struct lpfc_rscn_event_header) +
+ payload_len, GFP_KERNEL);
+ if (!rscn_event_data) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
+ "0147 Failed to allocate memory for RSCN event\n");
+ return;
}
+ rscn_event_data->event_type = FC_REG_RSCN_EVENT;
+ rscn_event_data->payload_length = payload_len;
+ memcpy(rscn_event_data->rscn_payload, payload_ptr,
+ payload_len);
- return 0;
+ fc_host_post_vendor_event(shost,
+ fc_get_event_number(),
+ sizeof(struct lpfc_els_event_header) + payload_len,
+ (char *)rscn_event_data,
+ LPFC_NL_VENDOR_ID);
+
+ kfree(rscn_event_data);
}
+/**
+ * lpfc_els_rcv_rscn - Process an unsolicited rscn iocb
+ * @vport: pointer to a host virtual N_Port data structure.
+ * @cmdiocb: pointer to lpfc command iocb data structure.
+ * @ndlp: pointer to a node-list data structure.
+ *
+ * This routine processes an unsolicited RSCN (Registration State Change
+ * Notification) IOCB. First, the payload of the unsolicited RSCN is walked
+ * to invoke fc_host_post_event() routine to the FC transport layer. If the
+ * discover state machine is about to begin discovery, it just accepts the
+ * RSCN and the discovery process will satisfy the RSCN. If this RSCN only
+ * contains N_Port IDs for other vports on this HBA, it just accepts the
+ * RSCN and ignore processing it. If the state machine is in the recovery
+ * state, the fc_rscn_id_list of this @vport is walked and the
+ * lpfc_rscn_recovery_check() routine is invoked to send recovery event for
+ * all nodes that match RSCN payload. Otherwise, the lpfc_els_handle_rscn()
+ * routine is invoked to handle the RSCN event.
+ *
+ * Return code
+ * 0 - Just sent the acc response
+ * 1 - Sent the acc response and waited for name server completion
+ **/
static int
lpfc_els_rcv_rscn(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
struct lpfc_nodelist *ndlp)
"0214 RSCN received Data: x%x x%x x%x x%x\n",
vport->fc_flag, payload_len, *lp,
vport->fc_rscn_id_cnt);
+
+ /* Send an RSCN event to the management application */
+ lpfc_send_rscn_event(vport, cmdiocb);
+
for (i = 0; i < payload_len/sizeof(uint32_t); i++)
fc_host_post_event(shost, fc_get_event_number(),
FCH_EVT_RSCN, lp[i]);
if (rscn_id == hba_id) {
/* ALL NPortIDs in RSCN are on HBA */
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
- "0214 Ignore RSCN "
+ "0219 Ignore RSCN "
"Data: x%x x%x x%x x%x\n",
vport->fc_flag, payload_len,
*lp, vport->fc_rscn_id_cnt);
/* Another thread is walking fc_rscn_id_list on this vport */
spin_unlock_irq(shost->host_lock);
vport->fc_flag |= FC_RSCN_DISCOVERY;
+ /* Send back ACC */
+ lpfc_els_rsp_acc(vport, ELS_CMD_ACC, cmdiocb, ndlp, NULL);
return 0;
}
/* Indicate we are walking fc_rscn_id_list on this vport */
return lpfc_els_handle_rscn(vport);
}
+/**
+ * lpfc_els_handle_rscn - Handle rscn for a vport
+ * @vport: pointer to a host virtual N_Port data structure.
+ *
+ * This routine handles the Registration State Configuration Notification
+ * (RSCN) for a @vport. If login to NameServer does not exist, a new ndlp shall
+ * be created and a Port Login (PLOGI) to the NameServer is issued. Otherwise,
+ * if the ndlp to NameServer exists, a Common Transport (CT) command to the
+ * NameServer shall be issued. If CT command to the NameServer fails to be
+ * issued, the lpfc_els_flush_rscn() routine shall be invoked to clean up any
+ * RSCN activities with the @vport.
+ *
+ * Return code
+ * 0 - Cleaned up rscn on the @vport
+ * 1 - Wait for plogi to name server before proceed
+ **/
int
lpfc_els_handle_rscn(struct lpfc_vport *vport)
{
return 0;
}
+/**
+ * lpfc_els_rcv_flogi - Process an unsolicited flogi iocb
+ * @vport: pointer to a host virtual N_Port data structure.
+ * @cmdiocb: pointer to lpfc command iocb data structure.
+ * @ndlp: pointer to a node-list data structure.
+ *
+ * This routine processes Fabric Login (FLOGI) IOCB received as an ELS
+ * unsolicited event. An unsolicited FLOGI can be received in a point-to-
+ * point topology. As an unsolicited FLOGI should not be received in a loop
+ * mode, any unsolicited FLOGI received in loop mode shall be ignored. The
+ * lpfc_check_sparm() routine is invoked to check the parameters in the
+ * unsolicited FLOGI. If parameters validation failed, the routine
+ * lpfc_els_rsp_reject() shall be called with reject reason code set to
+ * LSEXP_SPARM_OPTIONS to reject the FLOGI. Otherwise, the Port WWN in the
+ * FLOGI shall be compared with the Port WWN of the @vport to determine who
+ * will initiate PLOGI. The higher lexicographical value party shall has
+ * higher priority (as the winning port) and will initiate PLOGI and
+ * communicate Port_IDs (Addresses) for both nodes in PLOGI. The result
+ * of this will be marked in the @vport fc_flag field with FC_PT2PT_PLOGI
+ * and then the lpfc_els_rsp_acc() routine is invoked to accept the FLOGI.
+ *
+ * Return code
+ * 0 - Successfully processed the unsolicited flogi
+ * 1 - Failed to process the unsolicited flogi
+ **/
static int
lpfc_els_rcv_flogi(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
struct lpfc_nodelist *ndlp)
lpfc_init_link(phba, mbox,
phba->cfg_topology,
phba->cfg_link_speed);
- mbox->mb.un.varInitLnk.lipsr_AL_PA = 0;
+ mbox->u.mb.un.varInitLnk.lipsr_AL_PA = 0;
mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
mbox->vport = vport;
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
return 0;
}
+/**
+ * lpfc_els_rcv_rnid - Process an unsolicited rnid iocb
+ * @vport: pointer to a host virtual N_Port data structure.
+ * @cmdiocb: pointer to lpfc command iocb data structure.
+ * @ndlp: pointer to a node-list data structure.
+ *
+ * This routine processes Request Node Identification Data (RNID) IOCB
+ * received as an ELS unsolicited event. Only when the RNID specified format
+ * 0x0 or 0xDF (Topology Discovery Specific Node Identification Data)
+ * present, this routine will invoke the lpfc_els_rsp_rnid_acc() routine to
+ * Accept (ACC) the RNID ELS command. All the other RNID formats are
+ * rejected by invoking the lpfc_els_rsp_reject() routine.
+ *
+ * Return code
+ * 0 - Successfully processed rnid iocb (currently always return 0)
+ **/
static int
lpfc_els_rcv_rnid(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
struct lpfc_nodelist *ndlp)
return 0;
}
+/**
+ * lpfc_els_rcv_lirr - Process an unsolicited lirr iocb
+ * @vport: pointer to a host virtual N_Port data structure.
+ * @cmdiocb: pointer to lpfc command iocb data structure.
+ * @ndlp: pointer to a node-list data structure.
+ *
+ * This routine processes a Link Incident Report Registration(LIRR) IOCB
+ * received as an ELS unsolicited event. Currently, this function just invokes
+ * the lpfc_els_rsp_reject() routine to reject the LIRR IOCB unconditionally.
+ *
+ * Return code
+ * 0 - Successfully processed lirr iocb (currently always return 0)
+ **/
static int
lpfc_els_rcv_lirr(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
struct lpfc_nodelist *ndlp)
return 0;
}
+/**
+ * lpfc_els_rsp_rps_acc - Completion callbk func for MBX_READ_LNK_STAT mbox cmd
+ * @phba: pointer to lpfc hba data structure.
+ * @pmb: pointer to the driver internal queue element for mailbox command.
+ *
+ * This routine is the completion callback function for the MBX_READ_LNK_STAT
+ * mailbox command. This callback function is to actually send the Accept
+ * (ACC) response to a Read Port Status (RPS) unsolicited IOCB event. It
+ * collects the link statistics from the completion of the MBX_READ_LNK_STAT
+ * mailbox command, constructs the RPS response with the link statistics
+ * collected, and then invokes the lpfc_sli_issue_iocb() routine to send ACC
+ * response to the RPS.
+ *
+ * Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp
+ * will be incremented by 1 for holding the ndlp and the reference to ndlp
+ * will be stored into the context1 field of the IOCB for the completion
+ * callback function to the RPS Accept Response ELS IOCB command.
+ *
+ **/
static void
lpfc_els_rsp_rps_acc(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
{
- struct lpfc_sli *psli = &phba->sli;
- struct lpfc_sli_ring *pring = &psli->ring[LPFC_ELS_RING];
MAILBOX_t *mb;
IOCB_t *icmd;
RPS_RSP *rps_rsp;
uint16_t xri, status;
uint32_t cmdsize;
- mb = &pmb->mb;
+ mb = &pmb->u.mb;
ndlp = (struct lpfc_nodelist *) pmb->context2;
xri = (uint16_t) ((unsigned long)(pmb->context1));
ndlp->nlp_rpi);
elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
phba->fc_stat.elsXmitACC++;
- if (lpfc_sli_issue_iocb(phba, pring, elsiocb, 0) == IOCB_ERROR)
+ if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) == IOCB_ERROR)
lpfc_els_free_iocb(phba, elsiocb);
return;
}
+/**
+ * lpfc_els_rcv_rps - Process an unsolicited rps iocb
+ * @vport: pointer to a host virtual N_Port data structure.
+ * @cmdiocb: pointer to lpfc command iocb data structure.
+ * @ndlp: pointer to a node-list data structure.
+ *
+ * This routine processes Read Port Status (RPS) IOCB received as an
+ * ELS unsolicited event. It first checks the remote port state. If the
+ * remote port is not in NLP_STE_UNMAPPED_NODE state or NLP_STE_MAPPED_NODE
+ * state, it invokes the lpfc_els_rsp_reject() routine to send the reject
+ * response. Otherwise, it issue the MBX_READ_LNK_STAT mailbox command
+ * for reading the HBA link statistics. It is for the callback function,
+ * lpfc_els_rsp_rps_acc(), set to the MBX_READ_LNK_STAT mailbox command
+ * to actually sending out RPS Accept (ACC) response.
+ *
+ * Return codes
+ * 0 - Successfully processed rps iocb (currently always return 0)
+ **/
static int
lpfc_els_rcv_rps(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
struct lpfc_nodelist *ndlp)
struct ls_rjt stat;
if ((ndlp->nlp_state != NLP_STE_UNMAPPED_NODE) &&
- (ndlp->nlp_state != NLP_STE_MAPPED_NODE)) {
- stat.un.b.lsRjtRsvd0 = 0;
- stat.un.b.lsRjtRsnCode = LSRJT_UNABLE_TPC;
- stat.un.b.lsRjtRsnCodeExp = LSEXP_CANT_GIVE_DATA;
- stat.un.b.vendorUnique = 0;
- lpfc_els_rsp_reject(vport, stat.un.lsRjtError, cmdiocb, ndlp,
- NULL);
- }
+ (ndlp->nlp_state != NLP_STE_MAPPED_NODE))
+ /* reject the unsolicited RPS request and done with it */
+ goto reject_out;
pcmd = (struct lpfc_dmabuf *) cmdiocb->context2;
lp = (uint32_t *) pcmd->virt;
mempool_free(mbox, phba->mbox_mem_pool);
}
}
+
+reject_out:
+ /* issue rejection response */
stat.un.b.lsRjtRsvd0 = 0;
stat.un.b.lsRjtRsnCode = LSRJT_UNABLE_TPC;
stat.un.b.lsRjtRsnCodeExp = LSEXP_CANT_GIVE_DATA;
return 0;
}
+/**
+ * lpfc_els_rsp_rpl_acc - Issue an accept rpl els command
+ * @vport: pointer to a host virtual N_Port data structure.
+ * @cmdsize: size of the ELS command.
+ * @oldiocb: pointer to the original lpfc command iocb data structure.
+ * @ndlp: pointer to a node-list data structure.
+ *
+ * This routine issuees an Accept (ACC) Read Port List (RPL) ELS command.
+ * It is to be called by the lpfc_els_rcv_rpl() routine to accept the RPL.
+ *
+ * Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp
+ * will be incremented by 1 for holding the ndlp and the reference to ndlp
+ * will be stored into the context1 field of the IOCB for the completion
+ * callback function to the RPL Accept Response ELS command.
+ *
+ * Return code
+ * 0 - Successfully issued ACC RPL ELS command
+ * 1 - Failed to issue ACC RPL ELS command
+ **/
static int
lpfc_els_rsp_rpl_acc(struct lpfc_vport *vport, uint16_t cmdsize,
struct lpfc_iocbq *oldiocb, struct lpfc_nodelist *ndlp)
IOCB_t *icmd, *oldcmd;
RPL_RSP rpl_rsp;
struct lpfc_iocbq *elsiocb;
- struct lpfc_sli *psli = &phba->sli;
- struct lpfc_sli_ring *pring = &psli->ring[LPFC_ELS_RING];
uint8_t *pcmd;
elsiocb = lpfc_prep_els_iocb(vport, 0, cmdsize, oldiocb->retry, ndlp,
ndlp->nlp_rpi);
elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
phba->fc_stat.elsXmitACC++;
- if (lpfc_sli_issue_iocb(phba, pring, elsiocb, 0) == IOCB_ERROR) {
+ if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) ==
+ IOCB_ERROR) {
lpfc_els_free_iocb(phba, elsiocb);
return 1;
}
return 0;
}
+/**
+ * lpfc_els_rcv_rpl - Process an unsolicited rpl iocb
+ * @vport: pointer to a host virtual N_Port data structure.
+ * @cmdiocb: pointer to lpfc command iocb data structure.
+ * @ndlp: pointer to a node-list data structure.
+ *
+ * This routine processes Read Port List (RPL) IOCB received as an ELS
+ * unsolicited event. It first checks the remote port state. If the remote
+ * port is not in NLP_STE_UNMAPPED_NODE and NLP_STE_MAPPED_NODE states, it
+ * invokes the lpfc_els_rsp_reject() routine to send reject response.
+ * Otherwise, this routine then invokes the lpfc_els_rsp_rpl_acc() routine
+ * to accept the RPL.
+ *
+ * Return code
+ * 0 - Successfully processed rpl iocb (currently always return 0)
+ **/
static int
lpfc_els_rcv_rpl(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
struct lpfc_nodelist *ndlp)
if ((ndlp->nlp_state != NLP_STE_UNMAPPED_NODE) &&
(ndlp->nlp_state != NLP_STE_MAPPED_NODE)) {
+ /* issue rejection response */
stat.un.b.lsRjtRsvd0 = 0;
stat.un.b.lsRjtRsnCode = LSRJT_UNABLE_TPC;
stat.un.b.lsRjtRsnCodeExp = LSEXP_CANT_GIVE_DATA;
stat.un.b.vendorUnique = 0;
lpfc_els_rsp_reject(vport, stat.un.lsRjtError, cmdiocb, ndlp,
NULL);
+ /* rejected the unsolicited RPL request and done with it */
+ return 0;
}
pcmd = (struct lpfc_dmabuf *) cmdiocb->context2;
return 0;
}
+/**
+ * lpfc_els_rcv_farp - Process an unsolicited farp request els command
+ * @vport: pointer to a virtual N_Port data structure.
+ * @cmdiocb: pointer to lpfc command iocb data structure.
+ * @ndlp: pointer to a node-list data structure.
+ *
+ * This routine processes Fibre Channel Address Resolution Protocol
+ * (FARP) Request IOCB received as an ELS unsolicited event. Currently,
+ * the lpfc driver only supports matching on WWPN or WWNN for FARP. As such,
+ * FARP_MATCH_PORT flag and FARP_MATCH_NODE flag are checked against the
+ * Match Flag in the FARP request IOCB: if FARP_MATCH_PORT flag is set, the
+ * remote PortName is compared against the FC PortName stored in the @vport
+ * data structure; if FARP_MATCH_NODE flag is set, the remote NodeName is
+ * compared against the FC NodeName stored in the @vport data structure.
+ * If any of these matches and the FARP_REQUEST_FARPR flag is set in the
+ * FARP request IOCB Response Flag, the lpfc_issue_els_farpr() routine is
+ * invoked to send out FARP Response to the remote node. Before sending the
+ * FARP Response, however, the FARP_REQUEST_PLOGI flag is check in the FARP
+ * request IOCB Response Flag and, if it is set, the lpfc_issue_els_plogi()
+ * routine is invoked to log into the remote port first.
+ *
+ * Return code
+ * 0 - Either the FARP Match Mode not supported or successfully processed
+ **/
static int
lpfc_els_rcv_farp(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
struct lpfc_nodelist *ndlp)
return 0;
}
+/**
+ * lpfc_els_rcv_farpr - Process an unsolicited farp response iocb
+ * @vport: pointer to a host virtual N_Port data structure.
+ * @cmdiocb: pointer to lpfc command iocb data structure.
+ * @ndlp: pointer to a node-list data structure.
+ *
+ * This routine processes Fibre Channel Address Resolution Protocol
+ * Response (FARPR) IOCB received as an ELS unsolicited event. It simply
+ * invokes the lpfc_els_rsp_acc() routine to the remote node to accept
+ * the FARP response request.
+ *
+ * Return code
+ * 0 - Successfully processed FARPR IOCB (currently always return 0)
+ **/
static int
lpfc_els_rcv_farpr(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
struct lpfc_nodelist *ndlp)
return 0;
}
+/**
+ * lpfc_els_rcv_fan - Process an unsolicited fan iocb command
+ * @vport: pointer to a host virtual N_Port data structure.
+ * @cmdiocb: pointer to lpfc command iocb data structure.
+ * @fan_ndlp: pointer to a node-list data structure.
+ *
+ * This routine processes a Fabric Address Notification (FAN) IOCB
+ * command received as an ELS unsolicited event. The FAN ELS command will
+ * only be processed on a physical port (i.e., the @vport represents the
+ * physical port). The fabric NodeName and PortName from the FAN IOCB are
+ * compared against those in the phba data structure. If any of those is
+ * different, the lpfc_initial_flogi() routine is invoked to initialize
+ * Fabric Login (FLOGI) to the fabric to start the discover over. Otherwise,
+ * if both of those are identical, the lpfc_issue_fabric_reglogin() routine
+ * is invoked to register login to the fabric.
+ *
+ * Return code
+ * 0 - Successfully processed fan iocb (currently always return 0).
+ **/
static int
lpfc_els_rcv_fan(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
struct lpfc_nodelist *fan_ndlp)
{
- struct lpfc_dmabuf *pcmd;
+ struct lpfc_hba *phba = vport->phba;
uint32_t *lp;
- IOCB_t *icmd;
- uint32_t cmd, did;
FAN *fp;
- struct lpfc_nodelist *ndlp, *next_ndlp;
- struct lpfc_hba *phba = vport->phba;
-
- /* FAN received */
- lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
- "0265 FAN received\n");
- icmd = &cmdiocb->iocb;
- did = icmd->un.elsreq64.remoteID;
- pcmd = (struct lpfc_dmabuf *)cmdiocb->context2;
- lp = (uint32_t *)pcmd->virt;
-
- cmd = *lp++;
- fp = (FAN *) lp;
+ lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS, "0265 FAN received\n");
+ lp = (uint32_t *)((struct lpfc_dmabuf *)cmdiocb->context2)->virt;
+ fp = (FAN *) ++lp;
/* FAN received; Fan does not have a reply sequence */
-
- if (phba->pport->port_state == LPFC_LOCAL_CFG_LINK) {
+ if ((vport == phba->pport) &&
+ (vport->port_state == LPFC_LOCAL_CFG_LINK)) {
if ((memcmp(&phba->fc_fabparam.nodeName, &fp->FnodeName,
- sizeof(struct lpfc_name)) != 0) ||
+ sizeof(struct lpfc_name))) ||
(memcmp(&phba->fc_fabparam.portName, &fp->FportName,
- sizeof(struct lpfc_name)) != 0)) {
- /*
- * This node has switched fabrics. FLOGI is required
- * Clean up the old rpi's
- */
-
- list_for_each_entry_safe(ndlp, next_ndlp,
- &vport->fc_nodes, nlp_listp) {
- if (!NLP_CHK_NODE_ACT(ndlp))
- continue;
- if (ndlp->nlp_state != NLP_STE_NPR_NODE)
- continue;
- if (ndlp->nlp_type & NLP_FABRIC) {
- /*
- * Clean up old Fabric, Nameserver and
- * other NLP_FABRIC logins
- */
- lpfc_drop_node(vport, ndlp);
-
- } else if (!(ndlp->nlp_flag & NLP_NPR_ADISC)) {
- /* Fail outstanding I/O now since this
- * device is marked for PLOGI
- */
- lpfc_unreg_rpi(vport, ndlp);
- }
- }
-
+ sizeof(struct lpfc_name)))) {
+ /* This port has switched fabrics. FLOGI is required */
lpfc_initial_flogi(vport);
- return 0;
- }
- /* Discovery not needed,
- * move the nodes to their original state.
- */
- list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes,
- nlp_listp) {
- if (!NLP_CHK_NODE_ACT(ndlp))
- continue;
- if (ndlp->nlp_state != NLP_STE_NPR_NODE)
- continue;
-
- switch (ndlp->nlp_prev_state) {
- case NLP_STE_UNMAPPED_NODE:
- ndlp->nlp_prev_state = NLP_STE_NPR_NODE;
- lpfc_nlp_set_state(vport, ndlp,
- NLP_STE_UNMAPPED_NODE);
- break;
-
- case NLP_STE_MAPPED_NODE:
- ndlp->nlp_prev_state = NLP_STE_NPR_NODE;
- lpfc_nlp_set_state(vport, ndlp,
- NLP_STE_MAPPED_NODE);
- break;
-
- default:
- break;
- }
+ } else {
+ /* FAN verified - skip FLOGI */
+ vport->fc_myDID = vport->fc_prevDID;
+ if (phba->sli_rev < LPFC_SLI_REV4)
+ lpfc_issue_fabric_reglogin(vport);
+ else
+ lpfc_issue_reg_vfi(vport);
}
-
- /* Start discovery - this should just do CLEAR_LA */
- lpfc_disc_start(vport);
}
return 0;
}
+/**
+ * lpfc_els_timeout - Handler funciton to the els timer
+ * @ptr: holder for the timer function associated data.
+ *
+ * This routine is invoked by the ELS timer after timeout. It posts the ELS
+ * timer timeout event by setting the WORKER_ELS_TMO bit to the work port
+ * event bitmap and then invokes the lpfc_worker_wake_up() routine to wake
+ * up the worker thread. It is for the worker thread to invoke the routine
+ * lpfc_els_timeout_handler() to work on the posted event WORKER_ELS_TMO.
+ **/
void
lpfc_els_timeout(unsigned long ptr)
{
struct lpfc_vport *vport = (struct lpfc_vport *) ptr;
struct lpfc_hba *phba = vport->phba;
+ uint32_t tmo_posted;
unsigned long iflag;
spin_lock_irqsave(&vport->work_port_lock, iflag);
- if ((vport->work_port_events & WORKER_ELS_TMO) == 0) {
+ tmo_posted = vport->work_port_events & WORKER_ELS_TMO;
+ if (!tmo_posted)
vport->work_port_events |= WORKER_ELS_TMO;
- spin_unlock_irqrestore(&vport->work_port_lock, iflag);
+ spin_unlock_irqrestore(&vport->work_port_lock, iflag);
- spin_lock_irqsave(&phba->hbalock, iflag);
- if (phba->work_wait)
- lpfc_worker_wake_up(phba);
- spin_unlock_irqrestore(&phba->hbalock, iflag);
- }
- else
- spin_unlock_irqrestore(&vport->work_port_lock, iflag);
+ if (!tmo_posted)
+ lpfc_worker_wake_up(phba);
return;
}
+/**
+ * lpfc_els_timeout_handler - Process an els timeout event
+ * @vport: pointer to a virtual N_Port data structure.
+ *
+ * This routine is the actual handler function that processes an ELS timeout
+ * event. It walks the ELS ring to get and abort all the IOCBs (except the
+ * ABORT/CLOSE/FARP/FARPR/FDISC), which are associated with the @vport by
+ * invoking the lpfc_sli_issue_abort_iotag() routine.
+ **/
void
lpfc_els_timeout_handler(struct lpfc_vport *vport)
{
uint32_t timeout;
uint32_t remote_ID = 0xffffffff;
- /* If the timer is already canceled do nothing */
- if ((vport->work_port_events & WORKER_ELS_TMO) == 0) {
- return;
- }
spin_lock_irq(&phba->hbalock);
timeout = (uint32_t)(phba->fc_ratov << 1);
els_command == ELS_CMD_FDISC)
continue;
- if (vport != piocb->vport)
- continue;
-
if (piocb->drvrTimeout > 0) {
if (piocb->drvrTimeout >= timeout)
piocb->drvrTimeout -= timeout;
else {
struct lpfc_nodelist *ndlp;
ndlp = __lpfc_findnode_rpi(vport, cmd->ulpContext);
- if (ndlp)
+ if (ndlp && NLP_CHK_NODE_ACT(ndlp))
remote_ID = ndlp->nlp_DID;
}
lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
mod_timer(&vport->els_tmofunc, jiffies + HZ * timeout);
}
+/**
+ * lpfc_els_flush_cmd - Clean up the outstanding els commands to a vport
+ * @vport: pointer to a host virtual N_Port data structure.
+ *
+ * This routine is used to clean up all the outstanding ELS commands on a
+ * @vport. It first aborts the @vport by invoking lpfc_fabric_abort_vport()
+ * routine. After that, it walks the ELS transmit queue to remove all the
+ * IOCBs with the @vport other than the QUE_RING and ABORT/CLOSE IOCBs. For
+ * the IOCBs with a non-NULL completion callback function, the callback
+ * function will be invoked with the status set to IOSTAT_LOCAL_REJECT and
+ * un.ulpWord[4] set to IOERR_SLI_ABORTED. For IOCBs with a NULL completion
+ * callback function, the IOCB will simply be released. Finally, it walks
+ * the ELS transmit completion queue to issue an abort IOCB to any transmit
+ * completion queue IOCB that is associated with the @vport and is not
+ * an IOCB from libdfc (i.e., the management plane IOCBs that are not
+ * part of the discovery state machine) out to HBA by invoking the
+ * lpfc_sli_issue_abort_iotag() routine. Note that this function issues the
+ * abort IOCB to any transmit completion queueed IOCB, it does not guarantee
+ * the IOCBs are aborted when this function returns.
+ **/
void
lpfc_els_flush_cmd(struct lpfc_vport *vport)
{
}
spin_unlock_irq(&phba->hbalock);
- while (!list_empty(&completions)) {
- piocb = list_get_first(&completions, struct lpfc_iocbq, list);
- cmd = &piocb->iocb;
- list_del_init(&piocb->list);
-
- if (!piocb->iocb_cmpl)
- lpfc_sli_release_iocbq(phba, piocb);
- else {
- cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
- (piocb->iocb_cmpl) (phba, piocb, piocb);
- }
- }
+ /* Cancell all the IOCBs from the completions list */
+ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_ABORTED);
return;
}
+/**
+ * lpfc_els_flush_all_cmd - Clean up all the outstanding els commands to a HBA
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is used to clean up all the outstanding ELS commands on a
+ * @phba. It first aborts the @phba by invoking the lpfc_fabric_abort_hba()
+ * routine. After that, it walks the ELS transmit queue to remove all the
+ * IOCBs to the @phba other than the QUE_RING and ABORT/CLOSE IOCBs. For
+ * the IOCBs with the completion callback function associated, the callback
+ * function will be invoked with the status set to IOSTAT_LOCAL_REJECT and
+ * un.ulpWord[4] set to IOERR_SLI_ABORTED. For IOCBs without the completion
+ * callback function associated, the IOCB will simply be released. Finally,
+ * it walks the ELS transmit completion queue to issue an abort IOCB to any
+ * transmit completion queue IOCB that is not an IOCB from libdfc (i.e., the
+ * management plane IOCBs that are not part of the discovery state machine)
+ * out to HBA by invoking the lpfc_sli_issue_abort_iotag() routine.
+ **/
void
lpfc_els_flush_all_cmd(struct lpfc_hba *phba)
{
lpfc_sli_issue_abort_iotag(phba, pring, piocb);
}
spin_unlock_irq(&phba->hbalock);
- while (!list_empty(&completions)) {
- piocb = list_get_first(&completions, struct lpfc_iocbq, list);
- cmd = &piocb->iocb;
- list_del_init(&piocb->list);
- if (!piocb->iocb_cmpl)
- lpfc_sli_release_iocbq(phba, piocb);
- else {
- cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
- (piocb->iocb_cmpl) (phba, piocb, piocb);
+
+ /* Cancel all the IOCBs from the completions list */
+ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_ABORTED);
+
+ return;
+}
+
+/**
+ * lpfc_send_els_failure_event - Posts an ELS command failure event
+ * @phba: Pointer to hba context object.
+ * @cmdiocbp: Pointer to command iocb which reported error.
+ * @rspiocbp: Pointer to response iocb which reported error.
+ *
+ * This function sends an event when there is an ELS command
+ * failure.
+ **/
+void
+lpfc_send_els_failure_event(struct lpfc_hba *phba,
+ struct lpfc_iocbq *cmdiocbp,
+ struct lpfc_iocbq *rspiocbp)
+{
+ struct lpfc_vport *vport = cmdiocbp->vport;
+ struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
+ struct lpfc_lsrjt_event lsrjt_event;
+ struct lpfc_fabric_event_header fabric_event;
+ struct ls_rjt stat;
+ struct lpfc_nodelist *ndlp;
+ uint32_t *pcmd;
+
+ ndlp = cmdiocbp->context1;
+ if (!ndlp || !NLP_CHK_NODE_ACT(ndlp))
+ return;
+
+ if (rspiocbp->iocb.ulpStatus == IOSTAT_LS_RJT) {
+ lsrjt_event.header.event_type = FC_REG_ELS_EVENT;
+ lsrjt_event.header.subcategory = LPFC_EVENT_LSRJT_RCV;
+ memcpy(lsrjt_event.header.wwpn, &ndlp->nlp_portname,
+ sizeof(struct lpfc_name));
+ memcpy(lsrjt_event.header.wwnn, &ndlp->nlp_nodename,
+ sizeof(struct lpfc_name));
+ pcmd = (uint32_t *) (((struct lpfc_dmabuf *)
+ cmdiocbp->context2)->virt);
+ lsrjt_event.command = *pcmd;
+ stat.un.lsRjtError = be32_to_cpu(rspiocbp->iocb.un.ulpWord[4]);
+ lsrjt_event.reason_code = stat.un.b.lsRjtRsnCode;
+ lsrjt_event.explanation = stat.un.b.lsRjtRsnCodeExp;
+ fc_host_post_vendor_event(shost,
+ fc_get_event_number(),
+ sizeof(lsrjt_event),
+ (char *)&lsrjt_event,
+ LPFC_NL_VENDOR_ID);
+ return;
+ }
+ if ((rspiocbp->iocb.ulpStatus == IOSTAT_NPORT_BSY) ||
+ (rspiocbp->iocb.ulpStatus == IOSTAT_FABRIC_BSY)) {
+ fabric_event.event_type = FC_REG_FABRIC_EVENT;
+ if (rspiocbp->iocb.ulpStatus == IOSTAT_NPORT_BSY)
+ fabric_event.subcategory = LPFC_EVENT_PORT_BUSY;
+ else
+ fabric_event.subcategory = LPFC_EVENT_FABRIC_BUSY;
+ memcpy(fabric_event.wwpn, &ndlp->nlp_portname,
+ sizeof(struct lpfc_name));
+ memcpy(fabric_event.wwnn, &ndlp->nlp_nodename,
+ sizeof(struct lpfc_name));
+ fc_host_post_vendor_event(shost,
+ fc_get_event_number(),
+ sizeof(fabric_event),
+ (char *)&fabric_event,
+ LPFC_NL_VENDOR_ID);
+ return;
+ }
+
+}
+
+/**
+ * lpfc_send_els_event - Posts unsolicited els event
+ * @vport: Pointer to vport object.
+ * @ndlp: Pointer FC node object.
+ * @cmd: ELS command code.
+ *
+ * This function posts an event when there is an incoming
+ * unsolicited ELS command.
+ **/
+static void
+lpfc_send_els_event(struct lpfc_vport *vport,
+ struct lpfc_nodelist *ndlp,
+ uint32_t *payload)
+{
+ struct lpfc_els_event_header *els_data = NULL;
+ struct lpfc_logo_event *logo_data = NULL;
+ struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
+
+ if (*payload == ELS_CMD_LOGO) {
+ logo_data = kmalloc(sizeof(struct lpfc_logo_event), GFP_KERNEL);
+ if (!logo_data) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
+ "0148 Failed to allocate memory "
+ "for LOGO event\n");
+ return;
}
+ els_data = &logo_data->header;
+ } else {
+ els_data = kmalloc(sizeof(struct lpfc_els_event_header),
+ GFP_KERNEL);
+ if (!els_data) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
+ "0149 Failed to allocate memory "
+ "for ELS event\n");
+ return;
+ }
+ }
+ els_data->event_type = FC_REG_ELS_EVENT;
+ switch (*payload) {
+ case ELS_CMD_PLOGI:
+ els_data->subcategory = LPFC_EVENT_PLOGI_RCV;
+ break;
+ case ELS_CMD_PRLO:
+ els_data->subcategory = LPFC_EVENT_PRLO_RCV;
+ break;
+ case ELS_CMD_ADISC:
+ els_data->subcategory = LPFC_EVENT_ADISC_RCV;
+ break;
+ case ELS_CMD_LOGO:
+ els_data->subcategory = LPFC_EVENT_LOGO_RCV;
+ /* Copy the WWPN in the LOGO payload */
+ memcpy(logo_data->logo_wwpn, &payload[2],
+ sizeof(struct lpfc_name));
+ break;
+ default:
+ kfree(els_data);
+ return;
+ }
+ memcpy(els_data->wwpn, &ndlp->nlp_portname, sizeof(struct lpfc_name));
+ memcpy(els_data->wwnn, &ndlp->nlp_nodename, sizeof(struct lpfc_name));
+ if (*payload == ELS_CMD_LOGO) {
+ fc_host_post_vendor_event(shost,
+ fc_get_event_number(),
+ sizeof(struct lpfc_logo_event),
+ (char *)logo_data,
+ LPFC_NL_VENDOR_ID);
+ kfree(logo_data);
+ } else {
+ fc_host_post_vendor_event(shost,
+ fc_get_event_number(),
+ sizeof(struct lpfc_els_event_header),
+ (char *)els_data,
+ LPFC_NL_VENDOR_ID);
+ kfree(els_data);
}
+
return;
}
+
+/**
+ * lpfc_els_unsol_buffer - Process an unsolicited event data buffer
+ * @phba: pointer to lpfc hba data structure.
+ * @pring: pointer to a SLI ring.
+ * @vport: pointer to a host virtual N_Port data structure.
+ * @elsiocb: pointer to lpfc els command iocb data structure.
+ *
+ * This routine is used for processing the IOCB associated with a unsolicited
+ * event. It first determines whether there is an existing ndlp that matches
+ * the DID from the unsolicited IOCB. If not, it will create a new one with
+ * the DID from the unsolicited IOCB. The ELS command from the unsolicited
+ * IOCB is then used to invoke the proper routine and to set up proper state
+ * of the discovery state machine.
+ **/
static void
lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
struct lpfc_vport *vport, struct lpfc_iocbq *elsiocb)
payload = ((struct lpfc_dmabuf *)elsiocb->context2)->virt;
cmd = *payload;
if ((phba->sli3_options & LPFC_SLI3_HBQ_ENABLED) == 0)
- lpfc_post_buffer(phba, pring, 1, 1);
+ lpfc_post_buffer(phba, pring, 1);
did = icmd->un.rcvels.remoteID;
if (icmd->ulpStatus) {
newnode = 1;
if ((did & Fabric_DID_MASK) == Fabric_DID_MASK)
ndlp->nlp_type |= NLP_FABRIC;
- } else {
- if (!NLP_CHK_NODE_ACT(ndlp)) {
- ndlp = lpfc_enable_node(vport, ndlp,
- NLP_STE_UNUSED_NODE);
- if (!ndlp)
- goto dropit;
- }
- if (ndlp->nlp_state == NLP_STE_UNUSED_NODE) {
- /* This is simular to the new node path */
- ndlp = lpfc_nlp_get(ndlp);
- if (!ndlp)
- goto dropit;
- lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE);
- newnode = 1;
- }
+ } else if (!NLP_CHK_NODE_ACT(ndlp)) {
+ ndlp = lpfc_enable_node(vport, ndlp,
+ NLP_STE_UNUSED_NODE);
+ if (!ndlp)
+ goto dropit;
+ lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE);
+ newnode = 1;
+ if ((did & Fabric_DID_MASK) == Fabric_DID_MASK)
+ ndlp->nlp_type |= NLP_FABRIC;
+ } else if (ndlp->nlp_state == NLP_STE_UNUSED_NODE) {
+ /* This is similar to the new node path */
+ ndlp = lpfc_nlp_get(ndlp);
+ if (!ndlp)
+ goto dropit;
+ lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE);
+ newnode = 1;
}
phba->fc_stat.elsRcvFrame++;
- if (elsiocb->context1)
- lpfc_nlp_put(elsiocb->context1);
elsiocb->context1 = lpfc_nlp_get(ndlp);
elsiocb->vport = vport;
phba->fc_stat.elsRcvPLOGI++;
ndlp = lpfc_plogi_confirm_nport(phba, payload, ndlp);
+ lpfc_send_els_event(vport, ndlp, payload);
if (vport->port_state < LPFC_DISC_AUTH) {
if (!(phba->pport->fc_flag & FC_PT2PT) ||
(phba->pport->fc_flag & FC_PT2PT_PLOGI)) {
did, vport->port_state, ndlp->nlp_flag);
phba->fc_stat.elsRcvLOGO++;
+ lpfc_send_els_event(vport, ndlp, payload);
if (vport->port_state < LPFC_DISC_AUTH) {
rjt_err = LSRJT_UNABLE_TPC;
break;
did, vport->port_state, ndlp->nlp_flag);
phba->fc_stat.elsRcvPRLO++;
+ lpfc_send_els_event(vport, ndlp, payload);
if (vport->port_state < LPFC_DISC_AUTH) {
rjt_err = LSRJT_UNABLE_TPC;
break;
"RCV ADISC: did:x%x/ste:x%x flg:x%x",
did, vport->port_state, ndlp->nlp_flag);
+ lpfc_send_els_event(vport, ndlp, payload);
phba->fc_stat.elsRcvADISC++;
if (vport->port_state < LPFC_DISC_AUTH) {
rjt_err = LSRJT_UNABLE_TPC;
NULL);
}
+ lpfc_nlp_put(elsiocb->context1);
+ elsiocb->context1 = NULL;
return;
dropit:
if (vport && !(vport->load_flag & FC_UNLOADING))
- lpfc_printf_log(phba, KERN_ERR, LOG_ELS,
- "(%d):0111 Dropping received ELS cmd "
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
+ "0111 Dropping received ELS cmd "
"Data: x%x x%x x%x\n",
- vport->vpi, icmd->ulpStatus,
- icmd->un.ulpWord[4], icmd->ulpTimeout);
+ icmd->ulpStatus, icmd->un.ulpWord[4], icmd->ulpTimeout);
phba->fc_stat.elsRcvDrop++;
}
+/**
+ * lpfc_find_vport_by_vpid - Find a vport on a HBA through vport identifier
+ * @phba: pointer to lpfc hba data structure.
+ * @vpi: host virtual N_Port identifier.
+ *
+ * This routine finds a vport on a HBA (referred by @phba) through a
+ * @vpi. The function walks the HBA's vport list and returns the address
+ * of the vport with the matching @vpi.
+ *
+ * Return code
+ * NULL - No vport with the matching @vpi found
+ * Otherwise - Address to the vport with the matching @vpi.
+ **/
static struct lpfc_vport *
lpfc_find_vport_by_vpid(struct lpfc_hba *phba, uint16_t vpi)
{
return NULL;
}
+/**
+ * lpfc_els_unsol_event - Process an unsolicited event from an els sli ring
+ * @phba: pointer to lpfc hba data structure.
+ * @pring: pointer to a SLI ring.
+ * @elsiocb: pointer to lpfc els iocb data structure.
+ *
+ * This routine is used to process an unsolicited event received from a SLI
+ * (Service Level Interface) ring. The actual processing of the data buffer
+ * associated with the unsolicited event is done by invoking the routine
+ * lpfc_els_unsol_buffer() after properly set up the iocb buffer from the
+ * SLI ring on which the unsolicited event was received.
+ **/
void
lpfc_els_unsol_event(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
struct lpfc_iocbq *elsiocb)
struct lpfc_dmabuf *bdeBuf1 = elsiocb->context2;
struct lpfc_dmabuf *bdeBuf2 = elsiocb->context3;
+ elsiocb->context1 = NULL;
elsiocb->context2 = NULL;
elsiocb->context3 = NULL;
phba->fc_stat.NoRcvBuf++;
/* Not enough posted buffers; Try posting more buffers */
if (!(phba->sli3_options & LPFC_SLI3_HBQ_ENABLED))
- lpfc_post_buffer(phba, pring, 0, 1);
+ lpfc_post_buffer(phba, pring, 0);
return;
}
icmd->ulpCommand == CMD_IOCB_RCV_SEQ64_CX)) {
if (icmd->unsli3.rcvsli3.vpi == 0xffff)
vport = phba->pport;
- else {
- uint16_t vpi = icmd->unsli3.rcvsli3.vpi;
- vport = lpfc_find_vport_by_vpid(phba, vpi);
- }
+ else
+ vport = lpfc_find_vport_by_vpid(phba,
+ icmd->unsli3.rcvsli3.vpi - phba->vpi_base);
}
/* If there are no BDEs associated
* with this IOCB, there is nothing to do.
* The different unsolicited event handlers would tell us
* if they are done with "mp" by setting context2 to NULL.
*/
- lpfc_nlp_put(elsiocb->context1);
- elsiocb->context1 = NULL;
if (elsiocb->context2) {
lpfc_in_buf_free(phba, (struct lpfc_dmabuf *)elsiocb->context2);
elsiocb->context2 = NULL;
}
}
+/**
+ * lpfc_do_scr_ns_plogi - Issue a plogi to the name server for scr
+ * @phba: pointer to lpfc hba data structure.
+ * @vport: pointer to a virtual N_Port data structure.
+ *
+ * This routine issues a Port Login (PLOGI) to the Name Server with
+ * State Change Request (SCR) for a @vport. This routine will create an
+ * ndlp for the Name Server associated to the @vport if such node does
+ * not already exist. The PLOGI to Name Server is issued by invoking the
+ * lpfc_issue_els_plogi() routine. If Fabric-Device Management Interface
+ * (FDMI) is configured to the @vport, a FDMI node will be created and
+ * the PLOGI to FDMI is issued by invoking lpfc_issue_els_plogi() routine.
+ **/
void
lpfc_do_scr_ns_plogi(struct lpfc_hba *phba, struct lpfc_vport *vport)
{
return;
}
lpfc_nlp_init(vport, ndlp, NameServer_DID);
- ndlp->nlp_type |= NLP_FABRIC;
} else if (!NLP_CHK_NODE_ACT(ndlp)) {
ndlp = lpfc_enable_node(vport, ndlp, NLP_STE_UNUSED_NODE);
if (!ndlp) {
return;
}
}
+ ndlp->nlp_type |= NLP_FABRIC;
lpfc_nlp_set_state(vport, ndlp, NLP_STE_PLOGI_ISSUE);
if (ndlp_fdmi) {
lpfc_nlp_init(vport, ndlp_fdmi, FDMI_DID);
ndlp_fdmi->nlp_type |= NLP_FABRIC;
- ndlp_fdmi->nlp_state =
- NLP_STE_PLOGI_ISSUE;
+ lpfc_nlp_set_state(vport, ndlp_fdmi,
+ NLP_STE_PLOGI_ISSUE);
lpfc_issue_els_plogi(vport, ndlp_fdmi->nlp_DID,
0);
}
return;
}
+/**
+ * lpfc_cmpl_reg_new_vport - Completion callback function to register new vport
+ * @phba: pointer to lpfc hba data structure.
+ * @pmb: pointer to the driver internal queue element for mailbox command.
+ *
+ * This routine is the completion callback function to register new vport
+ * mailbox command. If the new vport mailbox command completes successfully,
+ * the fabric registration login shall be performed on physical port (the
+ * new vport created is actually a physical port, with VPI 0) or the port
+ * login to Name Server for State Change Request (SCR) will be performed
+ * on virtual port (real virtual port, with VPI greater than 0).
+ **/
static void
lpfc_cmpl_reg_new_vport(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
{
struct lpfc_vport *vport = pmb->vport;
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
struct lpfc_nodelist *ndlp = (struct lpfc_nodelist *) pmb->context2;
- MAILBOX_t *mb = &pmb->mb;
+ MAILBOX_t *mb = &pmb->u.mb;
spin_lock_irq(shost->host_lock);
vport->fc_flag &= ~FC_VPORT_NEEDS_REG_VPI;
} else {
if (vport == phba->pport)
- lpfc_issue_fabric_reglogin(vport);
+ if (phba->sli_rev < LPFC_SLI_REV4)
+ lpfc_issue_fabric_reglogin(vport);
+ else
+ lpfc_issue_reg_vfi(vport);
else
lpfc_do_scr_ns_plogi(phba, vport);
}
return;
}
+/**
+ * lpfc_register_new_vport - Register a new vport with a HBA
+ * @phba: pointer to lpfc hba data structure.
+ * @vport: pointer to a host virtual N_Port data structure.
+ * @ndlp: pointer to a node-list data structure.
+ *
+ * This routine registers the @vport as a new virtual port with a HBA.
+ * It is done through a registering vpi mailbox command.
+ **/
static void
lpfc_register_new_vport(struct lpfc_hba *phba, struct lpfc_vport *vport,
struct lpfc_nodelist *ndlp)
mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (mbox) {
- lpfc_reg_vpi(phba, vport->vpi, vport->fc_myDID, mbox);
+ lpfc_reg_vpi(vport, mbox);
mbox->vport = vport;
mbox->context2 = lpfc_nlp_get(ndlp);
mbox->mbox_cmpl = lpfc_cmpl_reg_new_vport;
return;
}
+/**
+ * lpfc_cmpl_els_fdisc - Completion function for fdisc iocb command
+ * @phba: pointer to lpfc hba data structure.
+ * @cmdiocb: pointer to lpfc command iocb data structure.
+ * @rspiocb: pointer to lpfc response iocb data structure.
+ *
+ * This routine is the completion callback function to a Fabric Discover
+ * (FDISC) ELS command. Since all the FDISC ELS commands are issued
+ * single threaded, each FDISC completion callback function will reset
+ * the discovery timer for all vports such that the timers will not get
+ * unnecessary timeout. The function checks the FDISC IOCB status. If error
+ * detected, the vport will be set to FC_VPORT_FAILED state. Otherwise,the
+ * vport will set to FC_VPORT_ACTIVE state. It then checks whether the DID
+ * assigned to the vport has been changed with the completion of the FDISC
+ * command. If so, both RPI (Remote Port Index) and VPI (Virtual Port Index)
+ * are unregistered from the HBA, and then the lpfc_register_new_vport()
+ * routine is invoked to register new vport with the HBA. Otherwise, the
+ * lpfc_do_scr_ns_plogi() routine is invoked to issue a PLOGI to the Name
+ * Server for State Change Request (SCR).
+ **/
static void
lpfc_cmpl_els_fdisc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
struct lpfc_iocbq *rspiocb)
goto out;
/* FDISC failed */
lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
- "0124 FDISC failed. (%d/%d)\n",
+ "0126 FDISC failed. (%d/%d)\n",
irsp->ulpStatus, irsp->un.ulpWord[4]);
+ goto fdisc_failed;
+ }
if (vport->fc_vport->vport_state == FC_VPORT_INITIALIZING)
lpfc_vport_set_state(vport, FC_VPORT_FAILED);
lpfc_nlp_put(ndlp);
/* giving up on FDISC. Cancel discovery timer */
lpfc_can_disctmo(vport);
- } else {
- spin_lock_irq(shost->host_lock);
- vport->fc_flag |= FC_FABRIC;
- if (vport->phba->fc_topology == TOPOLOGY_LOOP)
- vport->fc_flag |= FC_PUBLIC_LOOP;
- spin_unlock_irq(shost->host_lock);
+ spin_lock_irq(shost->host_lock);
+ vport->fc_flag |= FC_FABRIC;
+ if (vport->phba->fc_topology == TOPOLOGY_LOOP)
+ vport->fc_flag |= FC_PUBLIC_LOOP;
+ spin_unlock_irq(shost->host_lock);
- vport->fc_myDID = irsp->un.ulpWord[4] & Mask_DID;
- lpfc_vport_set_state(vport, FC_VPORT_ACTIVE);
- if ((vport->fc_prevDID != vport->fc_myDID) &&
- !(vport->fc_flag & FC_VPORT_NEEDS_REG_VPI)) {
- /* If our NportID changed, we need to ensure all
- * remaining NPORTs get unreg_login'ed so we can
- * issue unreg_vpi.
- */
- list_for_each_entry_safe(np, next_np,
- &vport->fc_nodes, nlp_listp) {
- if (!NLP_CHK_NODE_ACT(ndlp) ||
- (np->nlp_state != NLP_STE_NPR_NODE) ||
- !(np->nlp_flag & NLP_NPR_ADISC))
- continue;
- spin_lock_irq(shost->host_lock);
- np->nlp_flag &= ~NLP_NPR_ADISC;
- spin_unlock_irq(shost->host_lock);
- lpfc_unreg_rpi(vport, np);
- }
- lpfc_mbx_unreg_vpi(vport);
+ vport->fc_myDID = irsp->un.ulpWord[4] & Mask_DID;
+ lpfc_vport_set_state(vport, FC_VPORT_ACTIVE);
+ if ((vport->fc_prevDID != vport->fc_myDID) &&
+ !(vport->fc_flag & FC_VPORT_NEEDS_REG_VPI)) {
+ /* If our NportID changed, we need to ensure all
+ * remaining NPORTs get unreg_login'ed so we can
+ * issue unreg_vpi.
+ */
+ list_for_each_entry_safe(np, next_np,
+ &vport->fc_nodes, nlp_listp) {
+ if (!NLP_CHK_NODE_ACT(ndlp) ||
+ (np->nlp_state != NLP_STE_NPR_NODE) ||
+ !(np->nlp_flag & NLP_NPR_ADISC))
+ continue;
spin_lock_irq(shost->host_lock);
- vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
+ np->nlp_flag &= ~NLP_NPR_ADISC;
spin_unlock_irq(shost->host_lock);
+ lpfc_unreg_rpi(vport, np);
}
-
- if (vport->fc_flag & FC_VPORT_NEEDS_REG_VPI)
- lpfc_register_new_vport(phba, vport, ndlp);
- else
- lpfc_do_scr_ns_plogi(phba, vport);
-
- /* Unconditionaly kick off releasing fabric node for vports */
- lpfc_nlp_put(ndlp);
+ lpfc_mbx_unreg_vpi(vport);
+ spin_lock_irq(shost->host_lock);
+ vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
+ spin_unlock_irq(shost->host_lock);
}
+ if (vport->fc_flag & FC_VPORT_NEEDS_REG_VPI)
+ lpfc_register_new_vport(phba, vport, ndlp);
+ else
+ lpfc_do_scr_ns_plogi(phba, vport);
+ goto out;
+fdisc_failed:
+ lpfc_vport_set_state(vport, FC_VPORT_FAILED);
+ /* Cancel discovery timer */
+ lpfc_can_disctmo(vport);
+ lpfc_nlp_put(ndlp);
out:
lpfc_els_free_iocb(phba, cmdiocb);
}
+/**
+ * lpfc_issue_els_fdisc - Issue a fdisc iocb command
+ * @vport: pointer to a virtual N_Port data structure.
+ * @ndlp: pointer to a node-list data structure.
+ * @retry: number of retries to the command IOCB.
+ *
+ * This routine prepares and issues a Fabric Discover (FDISC) IOCB to
+ * a remote node (@ndlp) off a @vport. It uses the lpfc_issue_fabric_iocb()
+ * routine to issue the IOCB, which makes sure only one outstanding fabric
+ * IOCB will be sent off HBA at any given time.
+ *
+ * Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp
+ * will be incremented by 1 for holding the ndlp and the reference to ndlp
+ * will be stored into the context1 field of the IOCB for the completion
+ * callback function to the FDISC ELS command.
+ *
+ * Return code
+ * 0 - Successfully issued fdisc iocb command
+ * 1 - Failed to issue fdisc iocb command
+ **/
static int
lpfc_issue_els_fdisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
uint8_t retry)
icmd->un.elsreq64.myID = 0;
icmd->un.elsreq64.fl = 1;
- /* For FDISC, Let FDISC rsp set the NPortID for this VPI */
- icmd->ulpCt_h = 1;
- icmd->ulpCt_l = 0;
+ if (phba->sli_rev == LPFC_SLI_REV4) {
+ /* FDISC needs to be 1 for WQE VPI */
+ elsiocb->iocb.ulpCt_h = (SLI4_CT_VPI >> 1) & 1;
+ elsiocb->iocb.ulpCt_l = SLI4_CT_VPI & 1 ;
+ /* Set the ulpContext to the vpi */
+ elsiocb->iocb.ulpContext = vport->vpi + phba->vpi_base;
+ } else {
+ /* For FDISC, Let FDISC rsp set the NPortID for this VPI */
+ icmd->ulpCt_h = 1;
+ icmd->ulpCt_l = 0;
+ }
pcmd = (uint8_t *) (((struct lpfc_dmabuf *) elsiocb->context2)->virt);
*((uint32_t *) (pcmd)) = ELS_CMD_FDISC;
return 0;
}
+/**
+ * lpfc_cmpl_els_npiv_logo - Completion function with vport logo
+ * @phba: pointer to lpfc hba data structure.
+ * @cmdiocb: pointer to lpfc command iocb data structure.
+ * @rspiocb: pointer to lpfc response iocb data structure.
+ *
+ * This routine is the completion callback function to the issuing of a LOGO
+ * ELS command off a vport. It frees the command IOCB and then decrement the
+ * reference count held on ndlp for this completion function, indicating that
+ * the reference to the ndlp is no long needed. Note that the
+ * lpfc_els_free_iocb() routine decrements the ndlp reference held for this
+ * callback function and an additional explicit ndlp reference decrementation
+ * will trigger the actual release of the ndlp.
+ **/
static void
lpfc_cmpl_els_npiv_logo(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
struct lpfc_iocbq *rspiocb)
lpfc_nlp_put(ndlp);
}
+/**
+ * lpfc_issue_els_npiv_logo - Issue a logo off a vport
+ * @vport: pointer to a virtual N_Port data structure.
+ * @ndlp: pointer to a node-list data structure.
+ *
+ * This routine issues a LOGO ELS command to an @ndlp off a @vport.
+ *
+ * Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp
+ * will be incremented by 1 for holding the ndlp and the reference to ndlp
+ * will be stored into the context1 field of the IOCB for the completion
+ * callback function to the LOGO ELS command.
+ *
+ * Return codes
+ * 0 - Successfully issued logo off the @vport
+ * 1 - Failed to issue logo off the @vport
+ **/
int
lpfc_issue_els_npiv_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
{
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
struct lpfc_hba *phba = vport->phba;
- struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_ELS_RING];
IOCB_t *icmd;
struct lpfc_iocbq *elsiocb;
uint8_t *pcmd;
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag |= NLP_LOGO_SND;
spin_unlock_irq(shost->host_lock);
- if (lpfc_sli_issue_iocb(phba, pring, elsiocb, 0) == IOCB_ERROR) {
+ if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) ==
+ IOCB_ERROR) {
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag &= ~NLP_LOGO_SND;
spin_unlock_irq(shost->host_lock);
return 0;
}
+/**
+ * lpfc_fabric_block_timeout - Handler function to the fabric block timer
+ * @ptr: holder for the timer function associated data.
+ *
+ * This routine is invoked by the fabric iocb block timer after
+ * timeout. It posts the fabric iocb block timeout event by setting the
+ * WORKER_FABRIC_BLOCK_TMO bit to work port event bitmap and then invokes
+ * lpfc_worker_wake_up() routine to wake up the worker thread. It is for
+ * the worker thread to invoke the lpfc_unblock_fabric_iocbs() on the
+ * posted event WORKER_FABRIC_BLOCK_TMO.
+ **/
void
lpfc_fabric_block_timeout(unsigned long ptr)
{
struct lpfc_hba *phba = (struct lpfc_hba *) ptr;
unsigned long iflags;
uint32_t tmo_posted;
+
spin_lock_irqsave(&phba->pport->work_port_lock, iflags);
tmo_posted = phba->pport->work_port_events & WORKER_FABRIC_BLOCK_TMO;
if (!tmo_posted)
phba->pport->work_port_events |= WORKER_FABRIC_BLOCK_TMO;
spin_unlock_irqrestore(&phba->pport->work_port_lock, iflags);
- if (!tmo_posted) {
- spin_lock_irqsave(&phba->hbalock, iflags);
- if (phba->work_wait)
- lpfc_worker_wake_up(phba);
- spin_unlock_irqrestore(&phba->hbalock, iflags);
- }
+ if (!tmo_posted)
+ lpfc_worker_wake_up(phba);
+ return;
}
+/**
+ * lpfc_resume_fabric_iocbs - Issue a fabric iocb from driver internal list
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine issues one fabric iocb from the driver internal list to
+ * the HBA. It first checks whether it's ready to issue one fabric iocb to
+ * the HBA (whether there is no outstanding fabric iocb). If so, it shall
+ * remove one pending fabric iocb from the driver internal list and invokes
+ * lpfc_sli_issue_iocb() routine to send the fabric iocb to the HBA.
+ **/
static void
lpfc_resume_fabric_iocbs(struct lpfc_hba *phba)
{
struct lpfc_iocbq *iocb;
unsigned long iflags;
int ret;
- struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_ELS_RING];
IOCB_t *cmd;
repeat:
"Fabric sched1: ste:x%x",
iocb->vport->port_state, 0, 0);
- ret = lpfc_sli_issue_iocb(phba, pring, iocb, 0);
+ ret = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, iocb, 0);
if (ret == IOCB_ERROR) {
iocb->iocb_cmpl = iocb->fabric_iocb_cmpl;
return;
}
+/**
+ * lpfc_unblock_fabric_iocbs - Unblock issuing fabric iocb command
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine unblocks the issuing fabric iocb command. The function
+ * will clear the fabric iocb block bit and then invoke the routine
+ * lpfc_resume_fabric_iocbs() to issue one of the pending fabric iocb
+ * from the driver internal fabric iocb list.
+ **/
void
lpfc_unblock_fabric_iocbs(struct lpfc_hba *phba)
{
return;
}
+/**
+ * lpfc_block_fabric_iocbs - Block issuing fabric iocb command
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine blocks the issuing fabric iocb for a specified amount of
+ * time (currently 100 ms). This is done by set the fabric iocb block bit
+ * and set up a timeout timer for 100ms. When the block bit is set, no more
+ * fabric iocb will be issued out of the HBA.
+ **/
static void
lpfc_block_fabric_iocbs(struct lpfc_hba *phba)
{
return;
}
+/**
+ * lpfc_cmpl_fabric_iocb - Completion callback function for fabric iocb
+ * @phba: pointer to lpfc hba data structure.
+ * @cmdiocb: pointer to lpfc command iocb data structure.
+ * @rspiocb: pointer to lpfc response iocb data structure.
+ *
+ * This routine is the callback function that is put to the fabric iocb's
+ * callback function pointer (iocb->iocb_cmpl). The original iocb's callback
+ * function pointer has been stored in iocb->fabric_iocb_cmpl. This callback
+ * function first restores and invokes the original iocb's callback function
+ * and then invokes the lpfc_resume_fabric_iocbs() routine to issue the next
+ * fabric bound iocb from the driver internal fabric iocb list onto the wire.
+ **/
static void
lpfc_cmpl_fabric_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
struct lpfc_iocbq *rspiocb)
}
}
+/**
+ * lpfc_issue_fabric_iocb - Issue a fabric iocb command
+ * @phba: pointer to lpfc hba data structure.
+ * @iocb: pointer to lpfc command iocb data structure.
+ *
+ * This routine is used as the top-level API for issuing a fabric iocb command
+ * such as FLOGI and FDISC. To accommodate certain switch fabric, this driver
+ * function makes sure that only one fabric bound iocb will be outstanding at
+ * any given time. As such, this function will first check to see whether there
+ * is already an outstanding fabric iocb on the wire. If so, it will put the
+ * newly issued iocb onto the driver internal fabric iocb list, waiting to be
+ * issued later. Otherwise, it will issue the iocb on the wire and update the
+ * fabric iocb count it indicate that there is one fabric iocb on the wire.
+ *
+ * Note, this implementation has a potential sending out fabric IOCBs out of
+ * order. The problem is caused by the construction of the "ready" boolen does
+ * not include the condition that the internal fabric IOCB list is empty. As
+ * such, it is possible a fabric IOCB issued by this routine might be "jump"
+ * ahead of the fabric IOCBs in the internal list.
+ *
+ * Return code
+ * IOCB_SUCCESS - either fabric iocb put on the list or issued successfully
+ * IOCB_ERROR - failed to issue fabric iocb
+ **/
static int
lpfc_issue_fabric_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *iocb)
{
unsigned long iflags;
- struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_ELS_RING];
int ready;
int ret;
"Fabric sched2: ste:x%x",
iocb->vport->port_state, 0, 0);
- ret = lpfc_sli_issue_iocb(phba, pring, iocb, 0);
+ ret = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, iocb, 0);
if (ret == IOCB_ERROR) {
iocb->iocb_cmpl = iocb->fabric_iocb_cmpl;
return ret;
}
-
+/**
+ * lpfc_fabric_abort_vport - Abort a vport's iocbs from driver fabric iocb list
+ * @vport: pointer to a virtual N_Port data structure.
+ *
+ * This routine aborts all the IOCBs associated with a @vport from the
+ * driver internal fabric IOCB list. The list contains fabric IOCBs to be
+ * issued to the ELS IOCB ring. This abort function walks the fabric IOCB
+ * list, removes each IOCB associated with the @vport off the list, set the
+ * status feild to IOSTAT_LOCAL_REJECT, and invokes the callback function
+ * associated with the IOCB.
+ **/
static void lpfc_fabric_abort_vport(struct lpfc_vport *vport)
{
LIST_HEAD(completions);
struct lpfc_hba *phba = vport->phba;
struct lpfc_iocbq *tmp_iocb, *piocb;
- IOCB_t *cmd;
spin_lock_irq(&phba->hbalock);
list_for_each_entry_safe(piocb, tmp_iocb, &phba->fabric_iocb_list,
}
spin_unlock_irq(&phba->hbalock);
- while (!list_empty(&completions)) {
- piocb = list_get_first(&completions, struct lpfc_iocbq, list);
- list_del_init(&piocb->list);
-
- cmd = &piocb->iocb;
- cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
- (piocb->iocb_cmpl) (phba, piocb, piocb);
- }
+ /* Cancel all the IOCBs from the completions list */
+ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_ABORTED);
}
+/**
+ * lpfc_fabric_abort_nport - Abort a ndlp's iocbs from driver fabric iocb list
+ * @ndlp: pointer to a node-list data structure.
+ *
+ * This routine aborts all the IOCBs associated with an @ndlp from the
+ * driver internal fabric IOCB list. The list contains fabric IOCBs to be
+ * issued to the ELS IOCB ring. This abort function walks the fabric IOCB
+ * list, removes each IOCB associated with the @ndlp off the list, set the
+ * status feild to IOSTAT_LOCAL_REJECT, and invokes the callback function
+ * associated with the IOCB.
+ **/
void lpfc_fabric_abort_nport(struct lpfc_nodelist *ndlp)
{
LIST_HEAD(completions);
- struct lpfc_hba *phba = ndlp->vport->phba;
+ struct lpfc_hba *phba = ndlp->phba;
struct lpfc_iocbq *tmp_iocb, *piocb;
struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_ELS_RING];
- IOCB_t *cmd;
spin_lock_irq(&phba->hbalock);
list_for_each_entry_safe(piocb, tmp_iocb, &phba->fabric_iocb_list,
}
spin_unlock_irq(&phba->hbalock);
- while (!list_empty(&completions)) {
- piocb = list_get_first(&completions, struct lpfc_iocbq, list);
- list_del_init(&piocb->list);
-
- cmd = &piocb->iocb;
- cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
- (piocb->iocb_cmpl) (phba, piocb, piocb);
- }
+ /* Cancel all the IOCBs from the completions list */
+ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_ABORTED);
}
+/**
+ * lpfc_fabric_abort_hba - Abort all iocbs on driver fabric iocb list
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine aborts all the IOCBs currently on the driver internal
+ * fabric IOCB list. The list contains fabric IOCBs to be issued to the ELS
+ * IOCB ring. This function takes the entire IOCB list off the fabric IOCB
+ * list, removes IOCBs off the list, set the status feild to
+ * IOSTAT_LOCAL_REJECT, and invokes the callback function associated with
+ * the IOCB.
+ **/
void lpfc_fabric_abort_hba(struct lpfc_hba *phba)
{
LIST_HEAD(completions);
- struct lpfc_iocbq *piocb;
- IOCB_t *cmd;
spin_lock_irq(&phba->hbalock);
list_splice_init(&phba->fabric_iocb_list, &completions);
spin_unlock_irq(&phba->hbalock);
- while (!list_empty(&completions)) {
- piocb = list_get_first(&completions, struct lpfc_iocbq, list);
- list_del_init(&piocb->list);
-
- cmd = &piocb->iocb;
- cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
- (piocb->iocb_cmpl) (phba, piocb, piocb);
- }
+ /* Cancel all the IOCBs from the completions list */
+ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_ABORTED);
}
-
-#if 0
-void lpfc_fabric_abort_flogi(struct lpfc_hba *phba)
+/**
+ * lpfc_sli4_els_xri_aborted - Slow-path process of els xri abort
+ * @phba: pointer to lpfc hba data structure.
+ * @axri: pointer to the els xri abort wcqe structure.
+ *
+ * This routine is invoked by the worker thread to process a SLI4 slow-path
+ * ELS aborted xri.
+ **/
+void
+lpfc_sli4_els_xri_aborted(struct lpfc_hba *phba,
+ struct sli4_wcqe_xri_aborted *axri)
{
- LIST_HEAD(completions);
- struct lpfc_iocbq *tmp_iocb, *piocb;
- IOCB_t *cmd;
- struct lpfc_nodelist *ndlp;
-
- spin_lock_irq(&phba->hbalock);
- list_for_each_entry_safe(piocb, tmp_iocb, &phba->fabric_iocb_list,
- list) {
-
- cmd = &piocb->iocb;
- ndlp = (struct lpfc_nodelist *) piocb->context1;
- if (cmd->ulpCommand == CMD_ELS_REQUEST64_CR &&
- ndlp != NULL &&
- ndlp->nlp_DID == Fabric_DID)
- list_move_tail(&piocb->list, &completions);
- }
- spin_unlock_irq(&phba->hbalock);
-
- while (!list_empty(&completions)) {
- piocb = list_get_first(&completions, struct lpfc_iocbq, list);
- list_del_init(&piocb->list);
-
- cmd = &piocb->iocb;
- cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
- (piocb->iocb_cmpl) (phba, piocb, piocb);
+ uint16_t xri = bf_get(lpfc_wcqe_xa_xri, axri);
+ struct lpfc_sglq *sglq_entry = NULL, *sglq_next = NULL;
+ unsigned long iflag = 0;
+
+ spin_lock_irqsave(&phba->sli4_hba.abts_sgl_list_lock, iflag);
+ list_for_each_entry_safe(sglq_entry, sglq_next,
+ &phba->sli4_hba.lpfc_abts_els_sgl_list, list) {
+ if (sglq_entry->sli4_xritag == xri) {
+ list_del(&sglq_entry->list);
+ spin_unlock_irqrestore(
+ &phba->sli4_hba.abts_sgl_list_lock,
+ iflag);
+ spin_lock_irqsave(&phba->hbalock, iflag);
+
+ list_add_tail(&sglq_entry->list,
+ &phba->sli4_hba.lpfc_sgl_list);
+ spin_unlock_irqrestore(&phba->hbalock, iflag);
+ return;
+ }
}
+ spin_unlock_irqrestore(&phba->sli4_hba.abts_sgl_list_lock, iflag);
}
-#endif /* 0 */
-
-
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff