#include <linux/suspend.h>
#include <linux/workqueue.h>
#include <linux/jiffies.h>
+#include <linux/scatterlist.h>
#include <scsi/scsi.h>
-#include "scsi.h"
#include "scsi_priv.h"
+#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_host.h>
#include <linux/libata.h>
#include <asm/io.h>
static unsigned int ata_busy_sleep (struct ata_port *ap,
unsigned long tmout_pat,
unsigned long tmout);
+static void ata_dev_reread_id(struct ata_port *ap, struct ata_device *dev);
static void ata_dev_init_params(struct ata_port *ap, struct ata_device *dev);
static void ata_set_mode(struct ata_port *ap);
static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev);
-static unsigned int ata_get_mode_mask(struct ata_port *ap, int shift);
+static unsigned int ata_get_mode_mask(const struct ata_port *ap, int shift);
static int fgb(u32 bitmap);
-static int ata_choose_xfer_mode(struct ata_port *ap,
+static int ata_choose_xfer_mode(const struct ata_port *ap,
u8 *xfer_mode_out,
unsigned int *xfer_shift_out);
static void __ata_qc_complete(struct ata_queued_cmd *qc);
MODULE_VERSION(DRV_VERSION);
/**
- * ata_tf_load - send taskfile registers to host controller
+ * ata_tf_load_pio - send taskfile registers to host controller
* @ap: Port to which output is sent
* @tf: ATA taskfile register set
*
* Inherited from caller.
*/
-static void ata_tf_load_pio(struct ata_port *ap, struct ata_taskfile *tf)
+static void ata_tf_load_pio(struct ata_port *ap, const struct ata_taskfile *tf)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
* Inherited from caller.
*/
-static void ata_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf)
+static void ata_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
* LOCKING:
* Inherited from caller.
*/
-void ata_tf_load(struct ata_port *ap, struct ata_taskfile *tf)
+void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
{
if (ap->flags & ATA_FLAG_MMIO)
ata_tf_load_mmio(ap, tf);
* spin_lock_irqsave(host_set lock)
*/
-static void ata_exec_command_pio(struct ata_port *ap, struct ata_taskfile *tf)
+static void ata_exec_command_pio(struct ata_port *ap, const struct ata_taskfile *tf)
{
DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command);
* spin_lock_irqsave(host_set lock)
*/
-static void ata_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf)
+static void ata_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
{
DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command);
* LOCKING:
* spin_lock_irqsave(host_set lock)
*/
-void ata_exec_command(struct ata_port *ap, struct ata_taskfile *tf)
+void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf)
{
if (ap->flags & ATA_FLAG_MMIO)
ata_exec_command_mmio(ap, tf);
}
/**
- * ata_exec - issue ATA command to host controller
- * @ap: port to which command is being issued
- * @tf: ATA taskfile register set
- *
- * Issues PIO/MMIO write to ATA command register, with proper
- * synchronization with interrupt handler / other threads.
- *
- * LOCKING:
- * Obtains host_set lock.
- */
-
-static inline void ata_exec(struct ata_port *ap, struct ata_taskfile *tf)
-{
- unsigned long flags;
-
- DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command);
- spin_lock_irqsave(&ap->host_set->lock, flags);
- ap->ops->exec_command(ap, tf);
- spin_unlock_irqrestore(&ap->host_set->lock, flags);
-}
-
-/**
* ata_tf_to_host - issue ATA taskfile to host controller
* @ap: port to which command is being issued
* @tf: ATA taskfile register set
* other threads.
*
* LOCKING:
- * Obtains host_set lock.
- */
-
-static void ata_tf_to_host(struct ata_port *ap, struct ata_taskfile *tf)
-{
- ap->ops->tf_load(ap, tf);
-
- ata_exec(ap, tf);
-}
-
-/**
- * ata_tf_to_host_nolock - issue ATA taskfile to host controller
- * @ap: port to which command is being issued
- * @tf: ATA taskfile register set
- *
- * Issues ATA taskfile register set to ATA host controller,
- * with proper synchronization with interrupt handler and
- * other threads.
- *
- * LOCKING:
* spin_lock_irqsave(host_set lock)
*/
-void ata_tf_to_host_nolock(struct ata_port *ap, struct ata_taskfile *tf)
+static inline void ata_tf_to_host(struct ata_port *ap,
+ const struct ata_taskfile *tf)
{
ap->ops->tf_load(ap, tf);
ap->ops->exec_command(ap, tf);
{
struct ata_ioports *ioaddr = &ap->ioaddr;
+ tf->command = ata_check_status(ap);
+ tf->feature = inb(ioaddr->error_addr);
tf->nsect = inb(ioaddr->nsect_addr);
tf->lbal = inb(ioaddr->lbal_addr);
tf->lbam = inb(ioaddr->lbam_addr);
{
struct ata_ioports *ioaddr = &ap->ioaddr;
+ tf->command = ata_check_status(ap);
+ tf->feature = readb((void __iomem *)ioaddr->error_addr);
tf->nsect = readb((void __iomem *)ioaddr->nsect_addr);
tf->lbal = readb((void __iomem *)ioaddr->lbal_addr);
tf->lbam = readb((void __iomem *)ioaddr->lbam_addr);
/**
- * ata_chk_err - Read device error reg
- * @ap: port where the device is
- *
- * Reads ATA taskfile error register for
- * currently-selected device and return its value.
- *
- * Note: may NOT be used as the check_err() entry in
- * ata_port_operations.
- *
- * LOCKING:
- * Inherited from caller.
- */
-u8 ata_chk_err(struct ata_port *ap)
-{
- if (ap->ops->check_err)
- return ap->ops->check_err(ap);
-
- if (ap->flags & ATA_FLAG_MMIO) {
- return readb((void __iomem *) ap->ioaddr.error_addr);
- }
- return inb(ap->ioaddr.error_addr);
-}
-
-/**
* ata_tf_to_fis - Convert ATA taskfile to SATA FIS structure
* @tf: Taskfile to convert
* @fis: Buffer into which data will output
* Inherited from caller.
*/
-void ata_tf_to_fis(struct ata_taskfile *tf, u8 *fis, u8 pmp)
+void ata_tf_to_fis(const struct ata_taskfile *tf, u8 *fis, u8 pmp)
{
fis[0] = 0x27; /* Register - Host to Device FIS */
fis[1] = (pmp & 0xf) | (1 << 7); /* Port multiplier number,
* @fis: Buffer from which data will be input
* @tf: Taskfile to output
*
- * Converts a standard ATA taskfile to a Serial ATA
- * FIS structure (Register - Host to Device).
+ * Converts a serial ATA FIS structure to a standard ATA taskfile.
*
* LOCKING:
* Inherited from caller.
*/
-void ata_tf_from_fis(u8 *fis, struct ata_taskfile *tf)
+void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf)
{
tf->command = fis[2]; /* status */
tf->feature = fis[3]; /* error */
tf->hob_nsect = fis[13];
}
-/**
- * ata_prot_to_cmd - determine which read/write opcodes to use
- * @protocol: ATA_PROT_xxx taskfile protocol
- * @lba48: true is lba48 is present
- *
- * Given necessary input, determine which read/write commands
- * to use to transfer data.
- *
- * LOCKING:
- * None.
- */
-static int ata_prot_to_cmd(int protocol, int lba48)
-{
- int rcmd = 0, wcmd = 0;
-
- switch (protocol) {
- case ATA_PROT_PIO:
- if (lba48) {
- rcmd = ATA_CMD_PIO_READ_EXT;
- wcmd = ATA_CMD_PIO_WRITE_EXT;
- } else {
- rcmd = ATA_CMD_PIO_READ;
- wcmd = ATA_CMD_PIO_WRITE;
- }
- break;
-
- case ATA_PROT_DMA:
- if (lba48) {
- rcmd = ATA_CMD_READ_EXT;
- wcmd = ATA_CMD_WRITE_EXT;
- } else {
- rcmd = ATA_CMD_READ;
- wcmd = ATA_CMD_WRITE;
- }
- break;
-
- default:
- return -1;
- }
-
- return rcmd | (wcmd << 8);
-}
+static const u8 ata_rw_cmds[] = {
+ /* pio multi */
+ ATA_CMD_READ_MULTI,
+ ATA_CMD_WRITE_MULTI,
+ ATA_CMD_READ_MULTI_EXT,
+ ATA_CMD_WRITE_MULTI_EXT,
+ /* pio */
+ ATA_CMD_PIO_READ,
+ ATA_CMD_PIO_WRITE,
+ ATA_CMD_PIO_READ_EXT,
+ ATA_CMD_PIO_WRITE_EXT,
+ /* dma */
+ ATA_CMD_READ,
+ ATA_CMD_WRITE,
+ ATA_CMD_READ_EXT,
+ ATA_CMD_WRITE_EXT
+};
/**
- * ata_dev_set_protocol - set taskfile protocol and r/w commands
- * @dev: device to examine and configure
+ * ata_rwcmd_protocol - set taskfile r/w commands and protocol
+ * @qc: command to examine and configure
*
- * Examine the device configuration, after we have
- * read the identify-device page and configured the
- * data transfer mode. Set internal state related to
- * the ATA taskfile protocol (pio, pio mult, dma, etc.)
- * and calculate the proper read/write commands to use.
+ * Examine the device configuration and tf->flags to calculate
+ * the proper read/write commands and protocol to use.
*
* LOCKING:
* caller.
*/
-static void ata_dev_set_protocol(struct ata_device *dev)
+void ata_rwcmd_protocol(struct ata_queued_cmd *qc)
{
- int pio = (dev->flags & ATA_DFLAG_PIO);
- int lba48 = (dev->flags & ATA_DFLAG_LBA48);
- int proto, cmd;
+ struct ata_taskfile *tf = &qc->tf;
+ struct ata_device *dev = qc->dev;
- if (pio)
- proto = dev->xfer_protocol = ATA_PROT_PIO;
- else
- proto = dev->xfer_protocol = ATA_PROT_DMA;
+ int index, lba48, write;
+
+ lba48 = (tf->flags & ATA_TFLAG_LBA48) ? 2 : 0;
+ write = (tf->flags & ATA_TFLAG_WRITE) ? 1 : 0;
- cmd = ata_prot_to_cmd(proto, lba48);
- if (cmd < 0)
- BUG();
+ if (dev->flags & ATA_DFLAG_PIO) {
+ tf->protocol = ATA_PROT_PIO;
+ index = dev->multi_count ? 0 : 4;
+ } else {
+ tf->protocol = ATA_PROT_DMA;
+ index = 8;
+ }
- dev->read_cmd = cmd & 0xff;
- dev->write_cmd = (cmd >> 8) & 0xff;
+ tf->command = ata_rw_cmds[index + lba48 + write];
}
-static const char * xfer_mode_str[] = {
+static const char * const xfer_mode_str[] = {
"UDMA/16",
"UDMA/25",
"UDMA/33",
* the event of failure.
*/
-unsigned int ata_dev_classify(struct ata_taskfile *tf)
+unsigned int ata_dev_classify(const struct ata_taskfile *tf)
{
/* Apple's open source Darwin code hints that some devices only
* put a proper signature into the LBA mid/high registers,
memset(&tf, 0, sizeof(tf));
- err = ata_chk_err(ap);
ap->ops->tf_read(ap, &tf);
+ err = tf.feature;
dev->class = ATA_DEV_NONE;
* caller.
*/
-void ata_dev_id_string(u16 *id, unsigned char *s,
+void ata_dev_id_string(const u16 *id, unsigned char *s,
unsigned int ofs, unsigned int len)
{
unsigned int c;
* caller.
*/
-static inline void ata_dump_id(struct ata_device *dev)
+static inline void ata_dump_id(const struct ata_device *dev)
{
DPRINTK("49==0x%04x "
"53==0x%04x "
dev->id[93]);
}
+/*
+ * Compute the PIO modes available for this device. This is not as
+ * trivial as it seems if we must consider early devices correctly.
+ *
+ * FIXME: pre IDE drive timing (do we care ?).
+ */
+
+static unsigned int ata_pio_modes(const struct ata_device *adev)
+{
+ u16 modes;
+
+ /* Usual case. Word 53 indicates word 88 is valid */
+ if (adev->id[ATA_ID_FIELD_VALID] & (1 << 2)) {
+ modes = adev->id[ATA_ID_PIO_MODES] & 0x03;
+ modes <<= 3;
+ modes |= 0x7;
+ return modes;
+ }
+
+ /* If word 88 isn't valid then Word 51 holds the PIO timing number
+ for the maximum. Turn it into a mask and return it */
+ modes = (2 << (adev->id[ATA_ID_OLD_PIO_MODES] & 0xFF)) - 1 ;
+ return modes;
+}
+
+static int ata_qc_wait_err(struct ata_queued_cmd *qc,
+ struct completion *wait)
+{
+ int rc = 0;
+
+ if (wait_for_completion_timeout(wait, 30 * HZ) < 1) {
+ /* timeout handling */
+ qc->err_mask |= ac_err_mask(ata_chk_status(qc->ap));
+
+ if (!qc->err_mask) {
+ printk(KERN_WARNING "ata%u: slow completion (cmd %x)\n",
+ qc->ap->id, qc->tf.command);
+ } else {
+ printk(KERN_WARNING "ata%u: qc timeout (cmd %x)\n",
+ qc->ap->id, qc->tf.command);
+ rc = -EIO;
+ }
+
+ ata_qc_complete(qc);
+ }
+
+ return rc;
+}
+
/**
* ata_dev_identify - obtain IDENTIFY x DEVICE page
* @ap: port on which device we wish to probe resides
unsigned int major_version;
u16 tmp;
unsigned long xfer_modes;
- u8 status;
unsigned int using_edd;
DECLARE_COMPLETION(wait);
struct ata_queued_cmd *qc;
if (rc)
goto err_out;
else
- wait_for_completion(&wait);
+ ata_qc_wait_err(qc, &wait);
- status = ata_chk_status(ap);
- if (status & ATA_ERR) {
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+ ap->ops->tf_read(ap, &qc->tf);
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
+
+ if (qc->tf.command & ATA_ERR) {
/*
* arg! EDD works for all test cases, but seems to return
* the ATA signature for some ATAPI devices. Until the
* ATA software reset (SRST, the default) does not appear
* to have this problem.
*/
- if ((using_edd) && (qc->tf.command == ATA_CMD_ID_ATA)) {
- u8 err = ata_chk_err(ap);
+ if ((using_edd) && (dev->class == ATA_DEV_ATA)) {
+ u8 err = qc->tf.feature;
if (err & ATA_ABORTED) {
dev->class = ATA_DEV_ATAPI;
qc->cursg = 0;
qc->cursg_ofs = 0;
qc->cursect = 0;
qc->nsect = 1;
+ qc->err_mask = 0;
goto retry;
}
}
xfer_modes = dev->id[ATA_ID_UDMA_MODES];
if (!xfer_modes)
xfer_modes = (dev->id[ATA_ID_MWDMA_MODES]) << ATA_SHIFT_MWDMA;
- if (!xfer_modes) {
- xfer_modes = (dev->id[ATA_ID_PIO_MODES]) << (ATA_SHIFT_PIO + 3);
- xfer_modes |= (0x7 << ATA_SHIFT_PIO);
- }
+ if (!xfer_modes)
+ xfer_modes = ata_pio_modes(dev);
ata_dump_id(dev);
* anything else..
* Some drives were very specific about that exact sequence.
*/
- if (major_version < 4 || (!ata_id_has_lba(dev->id)))
+ if (major_version < 4 || (!ata_id_has_lba(dev->id))) {
ata_dev_init_params(ap, dev);
+ /* current CHS translation info (id[53-58]) might be
+ * changed. reread the identify device info.
+ */
+ ata_dev_reread_id(ap, dev);
+ }
+
if (ata_id_has_lba(dev->id)) {
dev->flags |= ATA_DFLAG_LBA;
}
/* ATAPI-specific feature tests */
- else {
+ else if (dev->class == ATA_DEV_ATAPI) {
if (ata_id_is_ata(dev->id)) /* sanity check */
goto err_out_nosup;
}
-static inline u8 ata_dev_knobble(struct ata_port *ap)
+static inline u8 ata_dev_knobble(const struct ata_port *ap)
{
return ((ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(ap->device->id)));
}
} while (time_before(jiffies, timeout));
/* TODO: phy layer with polling, timeouts, etc. */
- if (sata_dev_present(ap))
+ sstatus = scr_read(ap, SCR_STATUS);
+ if (sata_dev_present(ap)) {
+ const char *speed;
+ u32 tmp;
+
+ tmp = (sstatus >> 4) & 0xf;
+ if (tmp & (1 << 0))
+ speed = "1.5";
+ else if (tmp & (1 << 1))
+ speed = "3.0";
+ else
+ speed = "<unknown>";
+ printk(KERN_INFO "ata%u: SATA link up %s Gbps (SStatus %X)\n",
+ ap->id, speed, sstatus);
ata_port_probe(ap);
- else {
- sstatus = scr_read(ap, SCR_STATUS);
- printk(KERN_INFO "ata%u: no device found (phy stat %08x)\n",
+ } else {
+ printk(KERN_INFO "ata%u: SATA link down (SStatus %X)\n",
ap->id, sstatus);
ata_port_disable(ap);
}
ap->flags |= ATA_FLAG_PORT_DISABLED;
}
-static struct {
+/*
+ * This mode timing computation functionality is ported over from
+ * drivers/ide/ide-timing.h and was originally written by Vojtech Pavlik
+ */
+/*
+ * PIO 0-5, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds).
+ * These were taken from ATA/ATAPI-6 standard, rev 0a, except
+ * for PIO 5, which is a nonstandard extension and UDMA6, which
+ * is currently supported only by Maxtor drives.
+ */
+
+static const struct ata_timing ata_timing[] = {
+
+ { XFER_UDMA_6, 0, 0, 0, 0, 0, 0, 0, 15 },
+ { XFER_UDMA_5, 0, 0, 0, 0, 0, 0, 0, 20 },
+ { XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 30 },
+ { XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 45 },
+
+ { XFER_UDMA_2, 0, 0, 0, 0, 0, 0, 0, 60 },
+ { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 80 },
+ { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 120 },
+
+/* { XFER_UDMA_SLOW, 0, 0, 0, 0, 0, 0, 0, 150 }, */
+
+ { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 120, 0 },
+ { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 150, 0 },
+ { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 480, 0 },
+
+ { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 240, 0 },
+ { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 480, 0 },
+ { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 960, 0 },
+
+/* { XFER_PIO_5, 20, 50, 30, 100, 50, 30, 100, 0 }, */
+ { XFER_PIO_4, 25, 70, 25, 120, 70, 25, 120, 0 },
+ { XFER_PIO_3, 30, 80, 70, 180, 80, 70, 180, 0 },
+
+ { XFER_PIO_2, 30, 290, 40, 330, 100, 90, 240, 0 },
+ { XFER_PIO_1, 50, 290, 93, 383, 125, 100, 383, 0 },
+ { XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0 },
+
+/* { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 960, 0 }, */
+
+ { 0xFF }
+};
+
+#define ENOUGH(v,unit) (((v)-1)/(unit)+1)
+#define EZ(v,unit) ((v)?ENOUGH(v,unit):0)
+
+static void ata_timing_quantize(const struct ata_timing *t, struct ata_timing *q, int T, int UT)
+{
+ q->setup = EZ(t->setup * 1000, T);
+ q->act8b = EZ(t->act8b * 1000, T);
+ q->rec8b = EZ(t->rec8b * 1000, T);
+ q->cyc8b = EZ(t->cyc8b * 1000, T);
+ q->active = EZ(t->active * 1000, T);
+ q->recover = EZ(t->recover * 1000, T);
+ q->cycle = EZ(t->cycle * 1000, T);
+ q->udma = EZ(t->udma * 1000, UT);
+}
+
+void ata_timing_merge(const struct ata_timing *a, const struct ata_timing *b,
+ struct ata_timing *m, unsigned int what)
+{
+ if (what & ATA_TIMING_SETUP ) m->setup = max(a->setup, b->setup);
+ if (what & ATA_TIMING_ACT8B ) m->act8b = max(a->act8b, b->act8b);
+ if (what & ATA_TIMING_REC8B ) m->rec8b = max(a->rec8b, b->rec8b);
+ if (what & ATA_TIMING_CYC8B ) m->cyc8b = max(a->cyc8b, b->cyc8b);
+ if (what & ATA_TIMING_ACTIVE ) m->active = max(a->active, b->active);
+ if (what & ATA_TIMING_RECOVER) m->recover = max(a->recover, b->recover);
+ if (what & ATA_TIMING_CYCLE ) m->cycle = max(a->cycle, b->cycle);
+ if (what & ATA_TIMING_UDMA ) m->udma = max(a->udma, b->udma);
+}
+
+static const struct ata_timing* ata_timing_find_mode(unsigned short speed)
+{
+ const struct ata_timing *t;
+
+ for (t = ata_timing; t->mode != speed; t++)
+ if (t->mode == 0xFF)
+ return NULL;
+ return t;
+}
+
+int ata_timing_compute(struct ata_device *adev, unsigned short speed,
+ struct ata_timing *t, int T, int UT)
+{
+ const struct ata_timing *s;
+ struct ata_timing p;
+
+ /*
+ * Find the mode.
+ */
+
+ if (!(s = ata_timing_find_mode(speed)))
+ return -EINVAL;
+
+ memcpy(t, s, sizeof(*s));
+
+ /*
+ * If the drive is an EIDE drive, it can tell us it needs extended
+ * PIO/MW_DMA cycle timing.
+ */
+
+ if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */
+ memset(&p, 0, sizeof(p));
+ if(speed >= XFER_PIO_0 && speed <= XFER_SW_DMA_0) {
+ if (speed <= XFER_PIO_2) p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO];
+ else p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO_IORDY];
+ } else if(speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) {
+ p.cycle = adev->id[ATA_ID_EIDE_DMA_MIN];
+ }
+ ata_timing_merge(&p, t, t, ATA_TIMING_CYCLE | ATA_TIMING_CYC8B);
+ }
+
+ /*
+ * Convert the timing to bus clock counts.
+ */
+
+ ata_timing_quantize(t, t, T, UT);
+
+ /*
+ * Even in DMA/UDMA modes we still use PIO access for IDENTIFY, S.M.A.R.T
+ * and some other commands. We have to ensure that the DMA cycle timing is
+ * slower/equal than the fastest PIO timing.
+ */
+
+ if (speed > XFER_PIO_4) {
+ ata_timing_compute(adev, adev->pio_mode, &p, T, UT);
+ ata_timing_merge(&p, t, t, ATA_TIMING_ALL);
+ }
+
+ /*
+ * Lenghten active & recovery time so that cycle time is correct.
+ */
+
+ if (t->act8b + t->rec8b < t->cyc8b) {
+ t->act8b += (t->cyc8b - (t->act8b + t->rec8b)) / 2;
+ t->rec8b = t->cyc8b - t->act8b;
+ }
+
+ if (t->active + t->recover < t->cycle) {
+ t->active += (t->cycle - (t->active + t->recover)) / 2;
+ t->recover = t->cycle - t->active;
+ }
+
+ return 0;
+}
+
+static const struct {
unsigned int shift;
u8 base;
} xfer_mode_classes[] = {
*/
static void ata_set_mode(struct ata_port *ap)
{
- unsigned int i, xfer_shift;
+ unsigned int xfer_shift;
u8 xfer_mode;
int rc;
if (ap->ops->post_set_mode)
ap->ops->post_set_mode(ap);
- for (i = 0; i < 2; i++) {
- struct ata_device *dev = &ap->device[i];
- ata_dev_set_protocol(dev);
- }
-
return;
err_out:
*
* LOCKING:
* PCI/etc. bus probe sem.
+ * Obtains host_set lock.
*
*/
static unsigned int ata_bus_edd(struct ata_port *ap)
{
struct ata_taskfile tf;
+ unsigned long flags;
/* set up execute-device-diag (bus reset) taskfile */
/* also, take interrupts to a known state (disabled) */
tf.protocol = ATA_PROT_NODATA;
/* do bus reset */
+ spin_lock_irqsave(&ap->host_set->lock, flags);
ata_tf_to_host(ap, &tf);
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
/* spec says at least 2ms. but who knows with those
* crazy ATAPI devices...
DPRINTK("EXIT\n");
}
-static void ata_pr_blacklisted(struct ata_port *ap, struct ata_device *dev)
+static void ata_pr_blacklisted(const struct ata_port *ap,
+ const struct ata_device *dev)
{
printk(KERN_WARNING "ata%u: dev %u is on DMA blacklist, disabling DMA\n",
ap->id, dev->devno);
}
-static const char * ata_dma_blacklist [] = {
+static const char * const ata_dma_blacklist [] = {
"WDC AC11000H",
"WDC AC22100H",
"WDC AC32500H",
"_NEC DV5800A",
};
-static int ata_dma_blacklisted(struct ata_port *ap, struct ata_device *dev)
+static int ata_dma_blacklisted(const struct ata_device *dev)
{
unsigned char model_num[40];
char *s;
return 0;
}
-static unsigned int ata_get_mode_mask(struct ata_port *ap, int shift)
+static unsigned int ata_get_mode_mask(const struct ata_port *ap, int shift)
{
- struct ata_device *master, *slave;
+ const struct ata_device *master, *slave;
unsigned int mask;
master = &ap->device[0];
mask = ap->udma_mask;
if (ata_dev_present(master)) {
mask &= (master->id[ATA_ID_UDMA_MODES] & 0xff);
- if (ata_dma_blacklisted(ap, master)) {
+ if (ata_dma_blacklisted(master)) {
mask = 0;
ata_pr_blacklisted(ap, master);
}
}
if (ata_dev_present(slave)) {
mask &= (slave->id[ATA_ID_UDMA_MODES] & 0xff);
- if (ata_dma_blacklisted(ap, slave)) {
+ if (ata_dma_blacklisted(slave)) {
mask = 0;
ata_pr_blacklisted(ap, slave);
}
mask = ap->mwdma_mask;
if (ata_dev_present(master)) {
mask &= (master->id[ATA_ID_MWDMA_MODES] & 0x07);
- if (ata_dma_blacklisted(ap, master)) {
+ if (ata_dma_blacklisted(master)) {
mask = 0;
ata_pr_blacklisted(ap, master);
}
}
if (ata_dev_present(slave)) {
mask &= (slave->id[ATA_ID_MWDMA_MODES] & 0x07);
- if (ata_dma_blacklisted(ap, slave)) {
+ if (ata_dma_blacklisted(slave)) {
mask = 0;
ata_pr_blacklisted(ap, slave);
}
* Zero on success, negative on error.
*/
-static int ata_choose_xfer_mode(struct ata_port *ap,
+static int ata_choose_xfer_mode(const struct ata_port *ap,
u8 *xfer_mode_out,
unsigned int *xfer_shift_out)
{
if (rc)
ata_port_disable(ap);
else
- wait_for_completion(&wait);
+ ata_qc_wait_err(qc, &wait);
DPRINTK("EXIT\n");
}
/**
+ * ata_dev_reread_id - Reread the device identify device info
+ * @ap: port where the device is
+ * @dev: device to reread the identify device info
+ *
+ * LOCKING:
+ */
+
+static void ata_dev_reread_id(struct ata_port *ap, struct ata_device *dev)
+{
+ DECLARE_COMPLETION(wait);
+ struct ata_queued_cmd *qc;
+ unsigned long flags;
+ int rc;
+
+ qc = ata_qc_new_init(ap, dev);
+ BUG_ON(qc == NULL);
+
+ ata_sg_init_one(qc, dev->id, sizeof(dev->id));
+ qc->dma_dir = DMA_FROM_DEVICE;
+
+ if (dev->class == ATA_DEV_ATA) {
+ qc->tf.command = ATA_CMD_ID_ATA;
+ DPRINTK("do ATA identify\n");
+ } else {
+ qc->tf.command = ATA_CMD_ID_ATAPI;
+ DPRINTK("do ATAPI identify\n");
+ }
+
+ qc->tf.flags |= ATA_TFLAG_DEVICE;
+ qc->tf.protocol = ATA_PROT_PIO;
+ qc->nsect = 1;
+
+ qc->waiting = &wait;
+ qc->complete_fn = ata_qc_complete_noop;
+
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+ rc = ata_qc_issue(qc);
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
+
+ if (rc)
+ goto err_out;
+
+ ata_qc_wait_err(qc, &wait);
+
+ swap_buf_le16(dev->id, ATA_ID_WORDS);
+
+ ata_dump_id(dev);
+
+ DPRINTK("EXIT\n");
+
+ return;
+err_out:
+ ata_port_disable(ap);
+}
+
+/**
* ata_dev_init_params - Issue INIT DEV PARAMS command
* @ap: Port associated with device @dev
* @dev: Device to which command will be sent
if (rc)
ata_port_disable(ap);
else
- wait_for_completion(&wait);
+ ata_qc_wait_err(qc, &wait);
DPRINTK("EXIT\n");
}
static void ata_sg_clean(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
- struct scatterlist *sg = qc->sg;
+ struct scatterlist *sg = qc->__sg;
int dir = qc->dma_dir;
+ void *pad_buf = NULL;
assert(qc->flags & ATA_QCFLAG_DMAMAP);
assert(sg != NULL);
if (qc->flags & ATA_QCFLAG_SINGLE)
assert(qc->n_elem == 1);
- DPRINTK("unmapping %u sg elements\n", qc->n_elem);
+ VPRINTK("unmapping %u sg elements\n", qc->n_elem);
- if (qc->flags & ATA_QCFLAG_SG)
- dma_unmap_sg(ap->host_set->dev, sg, qc->n_elem, dir);
- else
- dma_unmap_single(ap->host_set->dev, sg_dma_address(&sg[0]),
- sg_dma_len(&sg[0]), dir);
+ /* if we padded the buffer out to 32-bit bound, and data
+ * xfer direction is from-device, we must copy from the
+ * pad buffer back into the supplied buffer
+ */
+ if (qc->pad_len && !(qc->tf.flags & ATA_TFLAG_WRITE))
+ pad_buf = ap->pad + (qc->tag * ATA_DMA_PAD_SZ);
+
+ if (qc->flags & ATA_QCFLAG_SG) {
+ if (qc->n_elem)
+ dma_unmap_sg(ap->host_set->dev, sg, qc->n_elem, dir);
+ /* restore last sg */
+ sg[qc->orig_n_elem - 1].length += qc->pad_len;
+ if (pad_buf) {
+ struct scatterlist *psg = &qc->pad_sgent;
+ void *addr = kmap_atomic(psg->page, KM_IRQ0);
+ memcpy(addr + psg->offset, pad_buf, qc->pad_len);
+ kunmap_atomic(psg->page, KM_IRQ0);
+ }
+ } else {
+ if (sg_dma_len(&sg[0]) > 0)
+ dma_unmap_single(ap->host_set->dev,
+ sg_dma_address(&sg[0]), sg_dma_len(&sg[0]),
+ dir);
+ /* restore sg */
+ sg->length += qc->pad_len;
+ if (pad_buf)
+ memcpy(qc->buf_virt + sg->length - qc->pad_len,
+ pad_buf, qc->pad_len);
+ }
qc->flags &= ~ATA_QCFLAG_DMAMAP;
- qc->sg = NULL;
+ qc->__sg = NULL;
}
/**
*/
static void ata_fill_sg(struct ata_queued_cmd *qc)
{
- struct scatterlist *sg = qc->sg;
struct ata_port *ap = qc->ap;
- unsigned int idx, nelem;
+ struct scatterlist *sg;
+ unsigned int idx;
- assert(sg != NULL);
+ assert(qc->__sg != NULL);
assert(qc->n_elem > 0);
idx = 0;
- for (nelem = qc->n_elem; nelem; nelem--,sg++) {
+ ata_for_each_sg(sg, qc) {
u32 addr, offset;
u32 sg_len, len;
qc->flags |= ATA_QCFLAG_SINGLE;
memset(&qc->sgent, 0, sizeof(qc->sgent));
- qc->sg = &qc->sgent;
+ qc->__sg = &qc->sgent;
qc->n_elem = 1;
+ qc->orig_n_elem = 1;
qc->buf_virt = buf;
- sg = qc->sg;
- sg->page = virt_to_page(buf);
- sg->offset = (unsigned long) buf & ~PAGE_MASK;
- sg->length = buflen;
+ sg = qc->__sg;
+ sg_init_one(sg, buf, buflen);
}
/**
unsigned int n_elem)
{
qc->flags |= ATA_QCFLAG_SG;
- qc->sg = sg;
+ qc->__sg = sg;
qc->n_elem = n_elem;
+ qc->orig_n_elem = n_elem;
}
/**
{
struct ata_port *ap = qc->ap;
int dir = qc->dma_dir;
- struct scatterlist *sg = qc->sg;
+ struct scatterlist *sg = qc->__sg;
dma_addr_t dma_address;
+ /* we must lengthen transfers to end on a 32-bit boundary */
+ qc->pad_len = sg->length & 3;
+ if (qc->pad_len) {
+ void *pad_buf = ap->pad + (qc->tag * ATA_DMA_PAD_SZ);
+ struct scatterlist *psg = &qc->pad_sgent;
+
+ assert(qc->dev->class == ATA_DEV_ATAPI);
+
+ memset(pad_buf, 0, ATA_DMA_PAD_SZ);
+
+ if (qc->tf.flags & ATA_TFLAG_WRITE)
+ memcpy(pad_buf, qc->buf_virt + sg->length - qc->pad_len,
+ qc->pad_len);
+
+ sg_dma_address(psg) = ap->pad_dma + (qc->tag * ATA_DMA_PAD_SZ);
+ sg_dma_len(psg) = ATA_DMA_PAD_SZ;
+ /* trim sg */
+ sg->length -= qc->pad_len;
+
+ DPRINTK("padding done, sg->length=%u pad_len=%u\n",
+ sg->length, qc->pad_len);
+ }
+
+ if (!sg->length) {
+ sg_dma_address(sg) = 0;
+ goto skip_map;
+ }
+
dma_address = dma_map_single(ap->host_set->dev, qc->buf_virt,
sg->length, dir);
- if (dma_mapping_error(dma_address))
+ if (dma_mapping_error(dma_address)) {
+ /* restore sg */
+ sg->length += qc->pad_len;
return -1;
+ }
sg_dma_address(sg) = dma_address;
+skip_map:
sg_dma_len(sg) = sg->length;
DPRINTK("mapped buffer of %d bytes for %s\n", sg_dma_len(sg),
static int ata_sg_setup(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
- struct scatterlist *sg = qc->sg;
- int n_elem, dir;
+ struct scatterlist *sg = qc->__sg;
+ struct scatterlist *lsg = &sg[qc->n_elem - 1];
+ int n_elem, pre_n_elem, dir, trim_sg = 0;
VPRINTK("ENTER, ata%u\n", ap->id);
assert(qc->flags & ATA_QCFLAG_SG);
+ /* we must lengthen transfers to end on a 32-bit boundary */
+ qc->pad_len = lsg->length & 3;
+ if (qc->pad_len) {
+ void *pad_buf = ap->pad + (qc->tag * ATA_DMA_PAD_SZ);
+ struct scatterlist *psg = &qc->pad_sgent;
+ unsigned int offset;
+
+ assert(qc->dev->class == ATA_DEV_ATAPI);
+
+ memset(pad_buf, 0, ATA_DMA_PAD_SZ);
+
+ /*
+ * psg->page/offset are used to copy to-be-written
+ * data in this function or read data in ata_sg_clean.
+ */
+ offset = lsg->offset + lsg->length - qc->pad_len;
+ psg->page = nth_page(lsg->page, offset >> PAGE_SHIFT);
+ psg->offset = offset_in_page(offset);
+
+ if (qc->tf.flags & ATA_TFLAG_WRITE) {
+ void *addr = kmap_atomic(psg->page, KM_IRQ0);
+ memcpy(pad_buf, addr + psg->offset, qc->pad_len);
+ kunmap_atomic(psg->page, KM_IRQ0);
+ }
+
+ sg_dma_address(psg) = ap->pad_dma + (qc->tag * ATA_DMA_PAD_SZ);
+ sg_dma_len(psg) = ATA_DMA_PAD_SZ;
+ /* trim last sg */
+ lsg->length -= qc->pad_len;
+ if (lsg->length == 0)
+ trim_sg = 1;
+
+ DPRINTK("padding done, sg[%d].length=%u pad_len=%u\n",
+ qc->n_elem - 1, lsg->length, qc->pad_len);
+ }
+
+ pre_n_elem = qc->n_elem;
+ if (trim_sg && pre_n_elem)
+ pre_n_elem--;
+
+ if (!pre_n_elem) {
+ n_elem = 0;
+ goto skip_map;
+ }
+
dir = qc->dma_dir;
- n_elem = dma_map_sg(ap->host_set->dev, sg, qc->n_elem, dir);
- if (n_elem < 1)
+ n_elem = dma_map_sg(ap->host_set->dev, sg, pre_n_elem, dir);
+ if (n_elem < 1) {
+ /* restore last sg */
+ lsg->length += qc->pad_len;
return -1;
+ }
DPRINTK("%d sg elements mapped\n", n_elem);
+skip_map:
qc->n_elem = n_elem;
return 0;
/**
* ata_poll_qc_complete - turn irq back on and finish qc
* @qc: Command to complete
- * @drv_stat: ATA status register content
+ * @err_mask: ATA status register content
*
* LOCKING:
* None. (grabs host lock)
*/
-void ata_poll_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat)
+void ata_poll_qc_complete(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
unsigned long flags;
spin_lock_irqsave(&ap->host_set->lock, flags);
ap->flags &= ~ATA_FLAG_NOINTR;
ata_irq_on(ap);
- ata_qc_complete(qc, drv_stat);
+ ata_qc_complete(qc);
spin_unlock_irqrestore(&ap->host_set->lock, flags);
}
/**
* ata_pio_poll -
- * @ap:
+ * @ap: the target ata_port
*
* LOCKING:
* None. (executing in kernel thread context)
*
* RETURNS:
- *
+ * timeout value to use
*/
static unsigned long ata_pio_poll(struct ata_port *ap)
{
+ struct ata_queued_cmd *qc;
u8 status;
unsigned int poll_state = HSM_ST_UNKNOWN;
unsigned int reg_state = HSM_ST_UNKNOWN;
- const unsigned int tmout_state = HSM_ST_TMOUT;
+
+ qc = ata_qc_from_tag(ap, ap->active_tag);
+ assert(qc != NULL);
switch (ap->hsm_task_state) {
case HSM_ST:
status = ata_chk_status(ap);
if (status & ATA_BUSY) {
if (time_after(jiffies, ap->pio_task_timeout)) {
- ap->hsm_task_state = tmout_state;
+ qc->err_mask |= AC_ERR_ATA_BUS;
+ ap->hsm_task_state = HSM_ST_TMOUT;
return 0;
}
ap->hsm_task_state = poll_state;
}
/**
- * ata_pio_complete -
- * @ap:
+ * ata_pio_complete - check if drive is busy or idle
+ * @ap: the target ata_port
*
* LOCKING:
* None. (executing in kernel thread context)
* msecs, then chk-status again. If still busy, fall back to
* HSM_ST_POLL state.
*/
- drv_stat = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 10);
- if (drv_stat & (ATA_BUSY | ATA_DRQ)) {
+ drv_stat = ata_busy_wait(ap, ATA_BUSY, 10);
+ if (drv_stat & ATA_BUSY) {
msleep(2);
- drv_stat = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 10);
- if (drv_stat & (ATA_BUSY | ATA_DRQ)) {
+ drv_stat = ata_busy_wait(ap, ATA_BUSY, 10);
+ if (drv_stat & ATA_BUSY) {
ap->hsm_task_state = HSM_ST_LAST_POLL;
ap->pio_task_timeout = jiffies + ATA_TMOUT_PIO;
return 0;
}
}
+ qc = ata_qc_from_tag(ap, ap->active_tag);
+ assert(qc != NULL);
+
drv_stat = ata_wait_idle(ap);
if (!ata_ok(drv_stat)) {
+ qc->err_mask |= __ac_err_mask(drv_stat);
ap->hsm_task_state = HSM_ST_ERR;
return 0;
}
- qc = ata_qc_from_tag(ap, ap->active_tag);
- assert(qc != NULL);
-
ap->hsm_task_state = HSM_ST_IDLE;
- ata_poll_qc_complete(qc, drv_stat);
+ assert(qc->err_mask == 0);
+ ata_poll_qc_complete(qc);
/* another command may start at this point */
/**
- * swap_buf_le16 -
+ * swap_buf_le16 - swap halves of 16-words in place
* @buf: Buffer to swap
* @buf_words: Number of 16-bit words in buffer.
*
* vice-versa.
*
* LOCKING:
+ * Inherited from caller.
*/
void swap_buf_le16(u16 *buf, unsigned int buf_words)
{
*
* LOCKING:
* Inherited from caller.
- *
*/
static void ata_mmio_data_xfer(struct ata_port *ap, unsigned char *buf,
*
* LOCKING:
* Inherited from caller.
- *
*/
static void ata_pio_data_xfer(struct ata_port *ap, unsigned char *buf,
*
* LOCKING:
* Inherited from caller.
- *
*/
static void ata_data_xfer(struct ata_port *ap, unsigned char *buf,
static void ata_pio_sector(struct ata_queued_cmd *qc)
{
int do_write = (qc->tf.flags & ATA_TFLAG_WRITE);
- struct scatterlist *sg = qc->sg;
+ struct scatterlist *sg = qc->__sg;
struct ata_port *ap = qc->ap;
struct page *page;
unsigned int offset;
static void __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes)
{
int do_write = (qc->tf.flags & ATA_TFLAG_WRITE);
- struct scatterlist *sg = qc->sg;
+ struct scatterlist *sg = qc->__sg;
struct ata_port *ap = qc->ap;
struct page *page;
unsigned char *buf;
return;
}
- sg = &qc->sg[qc->cursg];
+ sg = &qc->__sg[qc->cursg];
page = sg->page;
offset = sg->offset + qc->cursg_ofs;
*
* LOCKING:
* Inherited from caller.
- *
*/
static void atapi_pio_bytes(struct ata_queued_cmd *qc)
err_out:
printk(KERN_INFO "ata%u: dev %u: ATAPI check failed\n",
ap->id, dev->devno);
+ qc->err_mask |= AC_ERR_ATA_BUS;
ap->hsm_task_state = HSM_ST_ERR;
}
/**
- * ata_pio_sector -
- * @ap:
+ * ata_pio_block - start PIO on a block
+ * @ap: the target ata_port
*
* LOCKING:
* None. (executing in kernel thread context)
u8 status;
/*
- * This is purely hueristic. This is a fast path.
+ * This is purely heuristic. This is a fast path.
* Sometimes when we enter, BSY will be cleared in
* a chk-status or two. If not, the drive is probably seeking
* or something. Snooze for a couple msecs, then
qc = ata_qc_from_tag(ap, ap->active_tag);
assert(qc != NULL);
+ /* check error */
+ if (status & (ATA_ERR | ATA_DF)) {
+ qc->err_mask |= AC_ERR_DEV;
+ ap->hsm_task_state = HSM_ST_ERR;
+ return;
+ }
+
+ /* transfer data if any */
if (is_atapi_taskfile(&qc->tf)) {
- /* no more data to transfer or unsupported ATAPI command */
+ /* DRQ=0 means no more data to transfer */
if ((status & ATA_DRQ) == 0) {
ap->hsm_task_state = HSM_ST_LAST;
return;
} else {
/* handle BSY=0, DRQ=0 as error */
if ((status & ATA_DRQ) == 0) {
+ qc->err_mask |= AC_ERR_ATA_BUS;
ap->hsm_task_state = HSM_ST_ERR;
return;
}
static void ata_pio_error(struct ata_port *ap)
{
struct ata_queued_cmd *qc;
- u8 drv_stat;
+
+ printk(KERN_WARNING "ata%u: PIO error\n", ap->id);
qc = ata_qc_from_tag(ap, ap->active_tag);
assert(qc != NULL);
- drv_stat = ata_chk_status(ap);
- printk(KERN_WARNING "ata%u: PIO error, drv_stat 0x%x\n",
- ap->id, drv_stat);
+ /* make sure qc->err_mask is available to
+ * know what's wrong and recover
+ */
+ assert(qc->err_mask);
ap->hsm_task_state = HSM_ST_IDLE;
- ata_poll_qc_complete(qc, drv_stat | ATA_ERR);
+ ata_poll_qc_complete(qc);
}
static void ata_pio_task(void *_data)
{
struct ata_port *ap = qc->ap;
struct ata_host_set *host_set = ap->host_set;
- struct ata_device *dev = qc->dev;
u8 host_stat = 0, drv_stat;
unsigned long flags;
DPRINTK("ENTER\n");
- /* FIXME: doesn't this conflict with timeout handling? */
- if (qc->dev->class == ATA_DEV_ATAPI && qc->scsicmd) {
- struct scsi_cmnd *cmd = qc->scsicmd;
-
- if (!(cmd->eh_eflags & SCSI_EH_CANCEL_CMD)) {
-
- /* finish completing original command */
- spin_lock_irqsave(&host_set->lock, flags);
- __ata_qc_complete(qc);
- spin_unlock_irqrestore(&host_set->lock, flags);
-
- atapi_request_sense(ap, dev, cmd);
-
- cmd->result = (CHECK_CONDITION << 1) | (DID_OK << 16);
- scsi_finish_command(cmd);
-
- goto out;
- }
- }
-
spin_lock_irqsave(&host_set->lock, flags);
/* hack alert! We cannot use the supplied completion
ap->id, qc->tf.command, drv_stat, host_stat);
/* complete taskfile transaction */
- ata_qc_complete(qc, drv_stat);
+ qc->err_mask |= ac_err_mask(drv_stat);
+ ata_qc_complete(qc);
break;
}
spin_unlock_irqrestore(&host_set->lock, flags);
-out:
DPRINTK("EXIT\n");
}
DPRINTK("ENTER\n");
qc = ata_qc_from_tag(ap, ap->active_tag);
- if (!qc) {
+ if (qc)
+ ata_qc_timeout(qc);
+ else {
printk(KERN_ERR "ata%u: BUG: timeout without command\n",
ap->id);
goto out;
}
- ata_qc_timeout(qc);
-
out:
DPRINTK("EXIT\n");
}
qc = ata_qc_new(ap);
if (qc) {
- qc->sg = NULL;
- qc->flags = 0;
qc->scsicmd = NULL;
qc->ap = ap;
qc->dev = dev;
- qc->cursect = qc->cursg = qc->cursg_ofs = 0;
- qc->nsect = 0;
- qc->nbytes = qc->curbytes = 0;
-
- ata_tf_init(ap, &qc->tf, dev->devno);
- if (dev->flags & ATA_DFLAG_LBA) {
- qc->tf.flags |= ATA_TFLAG_LBA;
-
- if (dev->flags & ATA_DFLAG_LBA48)
- qc->tf.flags |= ATA_TFLAG_LBA48;
- }
+ ata_qc_reinit(qc);
}
return qc;
}
-int ata_qc_complete_noop(struct ata_queued_cmd *qc, u8 drv_stat)
+int ata_qc_complete_noop(struct ata_queued_cmd *qc)
{
return 0;
}
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
- *
*/
void ata_qc_free(struct ata_queued_cmd *qc)
{
/**
* ata_qc_complete - Complete an active ATA command
* @qc: Command to complete
- * @drv_stat: ATA Status register contents
+ * @err_mask: ATA Status register contents
*
* Indicate to the mid and upper layers that an ATA
* command has completed, with either an ok or not-ok status.
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
- *
*/
-void ata_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat)
+void ata_qc_complete(struct ata_queued_cmd *qc)
{
int rc;
qc->flags &= ~ATA_QCFLAG_ACTIVE;
/* call completion callback */
- rc = qc->complete_fn(qc, drv_stat);
+ rc = qc->complete_fn(qc);
/* if callback indicates not to complete command (non-zero),
* return immediately
switch (qc->tf.protocol) {
case ATA_PROT_NODATA:
- ata_tf_to_host_nolock(ap, &qc->tf);
+ ata_tf_to_host(ap, &qc->tf);
break;
case ATA_PROT_DMA:
case ATA_PROT_PIO: /* load tf registers, initiate polling pio */
ata_qc_set_polling(qc);
- ata_tf_to_host_nolock(ap, &qc->tf);
+ ata_tf_to_host(ap, &qc->tf);
ap->hsm_task_state = HSM_ST;
queue_work(ata_wq, &ap->pio_task);
break;
case ATA_PROT_ATAPI:
ata_qc_set_polling(qc);
- ata_tf_to_host_nolock(ap, &qc->tf);
+ ata_tf_to_host(ap, &qc->tf);
queue_work(ata_wq, &ap->packet_task);
break;
case ATA_PROT_ATAPI_NODATA:
ap->flags |= ATA_FLAG_NOINTR;
- ata_tf_to_host_nolock(ap, &qc->tf);
+ ata_tf_to_host(ap, &qc->tf);
queue_work(ata_wq, &ap->packet_task);
break;
ap->ops->irq_clear(ap);
/* complete taskfile transaction */
- ata_qc_complete(qc, status);
+ qc->err_mask |= ac_err_mask(status);
+ ata_qc_complete(qc);
break;
default:
*
* RETURNS:
* IRQ_NONE or IRQ_HANDLED.
- *
*/
irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs)
/* sleep-wait for BSY to clear */
DPRINTK("busy wait\n");
- if (ata_busy_sleep(ap, ATA_TMOUT_CDB_QUICK, ATA_TMOUT_CDB))
+ if (ata_busy_sleep(ap, ATA_TMOUT_CDB_QUICK, ATA_TMOUT_CDB)) {
+ qc->err_mask |= AC_ERR_ATA_BUS;
goto err_out;
+ }
/* make sure DRQ is set */
status = ata_chk_status(ap);
- if ((status & (ATA_BUSY | ATA_DRQ)) != ATA_DRQ)
+ if ((status & (ATA_BUSY | ATA_DRQ)) != ATA_DRQ) {
+ qc->err_mask |= AC_ERR_ATA_BUS;
goto err_out;
+ }
/* send SCSI cdb */
DPRINTK("send cdb\n");
return;
err_out:
- ata_poll_qc_complete(qc, ATA_ERR);
+ ata_poll_qc_complete(qc);
}
* May be used as the port_start() entry in ata_port_operations.
*
* LOCKING:
+ * Inherited from caller.
*/
int ata_port_start (struct ata_port *ap)
{
struct device *dev = ap->host_set->dev;
+ int rc;
ap->prd = dma_alloc_coherent(dev, ATA_PRD_TBL_SZ, &ap->prd_dma, GFP_KERNEL);
if (!ap->prd)
return -ENOMEM;
+ rc = ata_pad_alloc(ap, dev);
+ if (rc) {
+ dma_free_coherent(dev, ATA_PRD_TBL_SZ, ap->prd, ap->prd_dma);
+ return rc;
+ }
+
DPRINTK("prd alloc, virt %p, dma %llx\n", ap->prd, (unsigned long long) ap->prd_dma);
return 0;
* May be used as the port_stop() entry in ata_port_operations.
*
* LOCKING:
+ * Inherited from caller.
*/
void ata_port_stop (struct ata_port *ap)
struct device *dev = ap->host_set->dev;
dma_free_coherent(dev, ATA_PRD_TBL_SZ, ap->prd, ap->prd_dma);
+ ata_pad_free(ap, dev);
}
void ata_host_stop (struct ata_host_set *host_set)
* @do_unregister: 1 if we fully unregister, 0 to just stop the port
*
* LOCKING:
+ * Inherited from caller.
*/
static void ata_host_remove(struct ata_port *ap, unsigned int do_unregister)
*
* LOCKING:
* Inherited from caller.
- *
*/
static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host,
struct ata_host_set *host_set,
- struct ata_probe_ent *ent, unsigned int port_no)
+ const struct ata_probe_ent *ent, unsigned int port_no)
{
unsigned int i;
host->unique_id = ata_unique_id++;
host->max_cmd_len = 12;
- scsi_assign_lock(host, &host_set->lock);
-
ap->flags = ATA_FLAG_PORT_DISABLED;
ap->id = host->unique_id;
ap->host = host;
*
* RETURNS:
* New ata_port on success, for NULL on error.
- *
*/
-static struct ata_port * ata_host_add(struct ata_probe_ent *ent,
+static struct ata_port * ata_host_add(const struct ata_probe_ent *ent,
struct ata_host_set *host_set,
unsigned int port_no)
{
*
* RETURNS:
* Number of ports registered. Zero on error (no ports registered).
- *
*/
-int ata_device_add(struct ata_probe_ent *ent)
+int ata_device_add(const struct ata_probe_ent *ent)
{
unsigned int count = 0, i;
struct device *dev = ent->dev;
DPRINTK("ENTER\n");
/* alloc a container for our list of ATA ports (buses) */
- host_set = kmalloc(sizeof(struct ata_host_set) +
+ host_set = kzalloc(sizeof(struct ata_host_set) +
(ent->n_ports * sizeof(void *)), GFP_KERNEL);
if (!host_set)
return 0;
- memset(host_set, 0, sizeof(struct ata_host_set) + (ent->n_ports * sizeof(void *)));
spin_lock_init(&host_set->lock);
host_set->dev = dev;
count++;
}
- if (!count) {
- kfree(host_set);
- return 0;
- }
+ if (!count)
+ goto err_free_ret;
/* obtain irq, that is shared between channels */
if (request_irq(ent->irq, ent->port_ops->irq_handler, ent->irq_flags,
ata_host_remove(host_set->ports[i], 1);
scsi_host_put(host_set->ports[i]->host);
}
+err_free_ret:
kfree(host_set);
VPRINTK("EXIT, returning 0\n");
return 0;
* Inherited from calling layer (may sleep).
*/
-
void ata_host_set_remove(struct ata_host_set *host_set)
{
struct ata_port *ap;
}
static struct ata_probe_ent *
-ata_probe_ent_alloc(struct device *dev, struct ata_port_info *port)
+ata_probe_ent_alloc(struct device *dev, const struct ata_port_info *port)
{
struct ata_probe_ent *probe_ent;
- probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL);
+ probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL);
if (!probe_ent) {
printk(KERN_ERR DRV_NAME "(%s): out of memory\n",
kobject_name(&(dev->kobj)));
return NULL;
}
- memset(probe_ent, 0, sizeof(*probe_ent));
-
INIT_LIST_HEAD(&probe_ent->node);
probe_ent->dev = dev;
probe_ent->irq = pdev->irq;
probe_ent->irq_flags = SA_SHIRQ;
+ probe_ent->private_data = port[0]->private_data;
if (ports & ATA_PORT_PRIMARY) {
probe_ent->port[p].cmd_addr = pci_resource_start(pdev, 0);
return probe_ent;
}
-static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev, struct ata_port_info **port, int port_num)
+static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev, struct ata_port_info *port, int port_num)
{
struct ata_probe_ent *probe_ent;
- probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]);
+ probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port);
if (!probe_ent)
return NULL;
-
probe_ent->legacy_mode = 1;
probe_ent->n_ports = 1;
probe_ent->hard_port_no = port_num;
+ probe_ent->private_data = port->private_data;
switch(port_num)
{
*
* RETURNS:
* Zero on success, negative on errno-based value on error.
- *
*/
int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info,
if (legacy_mode) {
if (legacy_mode & (1 << 0))
- probe_ent = ata_pci_init_legacy_port(pdev, port, 0);
+ probe_ent = ata_pci_init_legacy_port(pdev, port[0], 0);
if (legacy_mode & (1 << 1))
- probe_ent2 = ata_pci_init_legacy_port(pdev, port, 1);
+ probe_ent2 = ata_pci_init_legacy_port(pdev, port[1], 1);
} else {
if (n_ports == 2)
probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
* @pdev: PCI device that was removed
*
* PCI layer indicates to libata via this hook that
- * hot-unplug or module unload event has occured.
+ * hot-unplug or module unload event has occurred.
* Handle this by unregistering all objects associated
* with this PCI device. Free those objects. Then finally
* release PCI resources and disable device.
}
/* move to PCI subsystem */
-int pci_test_config_bits(struct pci_dev *pdev, struct pci_bits *bits)
+int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits)
{
unsigned long tmp = 0;
EXPORT_SYMBOL_GPL(ata_tf_from_fis);
EXPORT_SYMBOL_GPL(ata_check_status);
EXPORT_SYMBOL_GPL(ata_altstatus);
-EXPORT_SYMBOL_GPL(ata_chk_err);
EXPORT_SYMBOL_GPL(ata_exec_command);
EXPORT_SYMBOL_GPL(ata_port_start);
EXPORT_SYMBOL_GPL(ata_port_stop);
EXPORT_SYMBOL_GPL(ata_dev_config);
EXPORT_SYMBOL_GPL(ata_scsi_simulate);
+EXPORT_SYMBOL_GPL(ata_timing_compute);
+EXPORT_SYMBOL_GPL(ata_timing_merge);
+
#ifdef CONFIG_PCI
EXPORT_SYMBOL_GPL(pci_test_config_bits);
EXPORT_SYMBOL_GPL(ata_pci_host_stop);