#include <linux/stat.h>
#include <linux/slab.h> /* for kmalloc() */
-#include <linux/config.h> /* for CONFIG_PCI */
#include <linux/pci.h> /* for PCI support */
#include <linux/proc_fs.h>
#include <linux/blkdev.h>
#include <linux/sched.h>
#include <linux/reboot.h>
#include <linux/spinlock.h>
-#include <linux/smp_lock.h>
+#include <linux/dma-mapping.h>
#include <linux/timer.h>
#include <linux/string.h>
static adpt_hba* hba_chain = NULL;
static int hba_count = 0;
-static struct file_operations adpt_fops = {
+static const struct file_operations adpt_fops = {
.ioctl = adpt_ioctl,
.open = adpt_open,
.release = adpt_close
PINFO("Detecting Adaptec I2O RAID controllers...\n");
/* search for all Adatpec I2O RAID cards */
- while ((pDev = pci_find_device( PCI_DPT_VENDOR_ID, PCI_ANY_ID, pDev))) {
+ while ((pDev = pci_get_device( PCI_DPT_VENDOR_ID, PCI_ANY_ID, pDev))) {
if(pDev->device == PCI_DPT_DEVICE_ID ||
pDev->device == PCI_DPT_RAPTOR_DEVICE_ID){
if(adpt_install_hba(sht, pDev) ){
PERROR("Will not try to detect others.\n");
return hba_count-1;
}
+ pci_dev_get(pDev);
}
}
/*
- * scsi_unregister will be called AFTER we return.
+ * scsi_unregister will be called AFTER we return.
*/
static int adpt_release(struct Scsi_Host *host)
{
s32 rcode;
memset(msg, 0, sizeof(msg));
- buf = (u8*)kmalloc(80,GFP_KERNEL|ADDR32);
+ buf = kmalloc(80,GFP_KERNEL|ADDR32);
if(!buf){
printk(KERN_ERR"%s: Could not allocate buffer\n",pHba->name);
return;
#endif
-static int adpt_install_hba(struct scsi_host_template* sht, struct pci_dev* pDev)
+static int adpt_install_hba(struct scsi_host_template* sht, struct pci_dev* pDev)
{
adpt_hba* pHba = NULL;
}
pci_set_master(pDev);
- if (pci_set_dma_mask(pDev, 0xffffffffffffffffULL) &&
- pci_set_dma_mask(pDev, 0xffffffffULL))
+ if (pci_set_dma_mask(pDev, DMA_32BIT_MASK))
return -EINVAL;
base_addr0_phys = pci_resource_start(pDev,0);
}
// Allocate and zero the data structure
- pHba = kmalloc(sizeof(adpt_hba), GFP_KERNEL);
- if( pHba == NULL) {
- if(msg_addr_virt != base_addr_virt){
+ pHba = kzalloc(sizeof(adpt_hba), GFP_KERNEL);
+ if (!pHba) {
+ if (msg_addr_virt != base_addr_virt)
iounmap(msg_addr_virt);
- }
iounmap(base_addr_virt);
pci_release_regions(pDev);
return -ENOMEM;
}
- memset(pHba, 0, sizeof(adpt_hba));
mutex_lock(&adpt_configuration_lock);
printk(KERN_INFO" BAR1 %p - size= %x\n",msg_addr_virt,hba_map1_area_size);
}
- if (request_irq (pDev->irq, adpt_isr, SA_SHIRQ, pHba->name, pHba)) {
+ if (request_irq (pDev->irq, adpt_isr, IRQF_SHARED, pHba->name, pHba)) {
printk(KERN_ERR"%s: Couldn't register IRQ %d\n", pHba->name, pDev->irq);
adpt_i2o_delete_hba(pHba);
return -EINVAL;
}
}
}
+ pci_dev_put(pHba->pDev);
kfree(pHba);
if(hba_count <= 0){
schedule_timeout_uninterruptible(1);
} while (m == EMPTY_QUEUE);
- status = (u8*)kmalloc(4, GFP_KERNEL|ADDR32);
+ status = kzalloc(4, GFP_KERNEL|ADDR32);
if(status == NULL) {
adpt_send_nop(pHba, m);
printk(KERN_ERR"IOP reset failed - no free memory.\n");
return -ENOMEM;
}
- memset(status,0,4);
msg[0]=EIGHT_WORD_MSG_SIZE|SGL_OFFSET_0;
msg[1]=I2O_CMD_ADAPTER_RESET<<24|HOST_TID<<12|ADAPTER_TID;
}
continue;
}
- d = (struct i2o_device *)kmalloc(sizeof(struct i2o_device), GFP_KERNEL);
+ d = kmalloc(sizeof(struct i2o_device), GFP_KERNEL);
if(d==NULL)
{
printk(KERN_CRIT"%s: Out of memory for I2O device data.\n",pHba->name);
continue;
}
if( pHba->channel[bus_no].device[scsi_id] == NULL){
- pDev = kmalloc(sizeof(struct adpt_device),GFP_KERNEL);
+ pDev = kzalloc(sizeof(struct adpt_device),GFP_KERNEL);
if(pDev == NULL) {
return -ENOMEM;
}
pHba->channel[bus_no].device[scsi_id] = pDev;
- memset(pDev,0,sizeof(struct adpt_device));
} else {
for( pDev = pHba->channel[bus_no].device[scsi_id];
pDev->next_lun; pDev = pDev->next_lun){
}
- pDev->next_lun = kmalloc(sizeof(struct adpt_device),GFP_KERNEL);
+ pDev->next_lun = kzalloc(sizeof(struct adpt_device),GFP_KERNEL);
if(pDev->next_lun == NULL) {
return -ENOMEM;
}
- memset(pDev->next_lun,0,sizeof(struct adpt_device));
pDev = pDev->next_lun;
}
pDev->tid = tid;
reply_size = REPLY_FRAME_SIZE;
}
reply_size *= 4;
- reply = kmalloc(REPLY_FRAME_SIZE*4, GFP_KERNEL);
+ reply = kzalloc(REPLY_FRAME_SIZE*4, GFP_KERNEL);
if(reply == NULL) {
printk(KERN_WARNING"%s: Could not allocate reply buffer\n",pHba->name);
return -ENOMEM;
}
- memset(reply,0,REPLY_FRAME_SIZE*4);
sg_offset = (msg[0]>>4)&0xf;
msg[2] = 0x40000000; // IOCTL context
msg[3] = (u32)reply;
}
-static irqreturn_t adpt_isr(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t adpt_isr(int irq, void *dev_id)
{
struct scsi_cmnd* cmd;
adpt_hba* pHba = dev_id;
u32 *lenptr;
int direction;
int scsidir;
+ int nseg;
u32 len;
u32 reqlen;
s32 rcode;
memset(msg, 0 , sizeof(msg));
- len = cmd->request_bufflen;
+ len = scsi_bufflen(cmd);
direction = 0x00000000;
scsidir = 0x00000000; // DATA NO XFER
lenptr=mptr++; /* Remember me - fill in when we know */
reqlen = 14; // SINGLE SGE
/* Now fill in the SGList and command */
- if(cmd->use_sg) {
- struct scatterlist *sg = (struct scatterlist *)cmd->request_buffer;
- int sg_count = pci_map_sg(pHba->pDev, sg, cmd->use_sg,
- cmd->sc_data_direction);
+ nseg = scsi_dma_map(cmd);
+ BUG_ON(nseg < 0);
+ if (nseg) {
+ struct scatterlist *sg;
len = 0;
- for(i = 0 ; i < sg_count; i++) {
+ scsi_for_each_sg(cmd, sg, nseg, i) {
*mptr++ = direction|0x10000000|sg_dma_len(sg);
len+=sg_dma_len(sg);
*mptr++ = sg_dma_address(sg);
- sg++;
+ /* Make this an end of list */
+ if (i == nseg - 1)
+ mptr[-2] = direction|0xD0000000|sg_dma_len(sg);
}
- /* Make this an end of list */
- mptr[-2] = direction|0xD0000000|sg_dma_len(sg-1);
reqlen = mptr - msg;
*lenptr = len;
len, cmd->underflow);
}
} else {
- *lenptr = len = cmd->request_bufflen;
- if(len == 0) {
- reqlen = 12;
- } else {
- *mptr++ = 0xD0000000|direction|cmd->request_bufflen;
- *mptr++ = pci_map_single(pHba->pDev,
- cmd->request_buffer,
- cmd->request_bufflen,
- cmd->sc_data_direction);
- }
+ *lenptr = len = 0;
+ reqlen = 12;
}
/* Stick the headers on */
pHba->host = host;
host->irq = pHba->pDev->irq;
- /* no IO ports, so don't have to set host->io_port and
+ /* no IO ports, so don't have to set host->io_port and
* host->n_io_port
*/
host->io_port = 0;
host->n_io_port = 0;
- /* see comments in hosts.h */
+ /* see comments in scsi_host.h */
host->max_id = 16;
host->max_lun = 256;
host->max_channel = pHba->top_scsi_channel + 1;
hba_status = detailed_status >> 8;
// calculate resid for sg
- cmd->resid = cmd->request_bufflen - readl(reply+5);
+ scsi_set_resid(cmd, scsi_bufflen(cmd) - readl(reply+5));
pHba = (adpt_hba*) cmd->device->host->hostdata[0];
pDev = pDev->next_lun;
}
if(!pDev ) { // Something new add it
- d = (struct i2o_device *)kmalloc(sizeof(struct i2o_device), GFP_KERNEL);
+ d = kmalloc(sizeof(struct i2o_device), GFP_KERNEL);
if(d==NULL)
{
printk(KERN_CRIT "Out of memory for I2O device data.\n");
}
pDev = pHba->channel[bus_no].device[scsi_id];
if( pDev == NULL){
- pDev = kmalloc(sizeof(struct adpt_device),GFP_KERNEL);
+ pDev = kzalloc(sizeof(struct adpt_device),GFP_KERNEL);
if(pDev == NULL) {
return -ENOMEM;
}
while (pDev->next_lun) {
pDev = pDev->next_lun;
}
- pDev = pDev->next_lun = kmalloc(sizeof(struct adpt_device),GFP_KERNEL);
+ pDev = pDev->next_lun = kzalloc(sizeof(struct adpt_device),GFP_KERNEL);
if(pDev == NULL) {
return -ENOMEM;
}
}
- memset(pDev,0,sizeof(struct adpt_device));
pDev->tid = d->lct_data.tid;
pDev->scsi_channel = bus_no;
pDev->scsi_id = scsi_id;
msg=(u32 __iomem *)(pHba->msg_addr_virt+m);
- status = kmalloc(4,GFP_KERNEL|ADDR32);
- if (status==NULL) {
+ status = kzalloc(4, GFP_KERNEL|ADDR32);
+ if (!status) {
adpt_send_nop(pHba, m);
printk(KERN_WARNING"%s: IOP reset failed - no free memory.\n",
pHba->name);
return -ENOMEM;
}
- memset(status, 0, 4);
writel(EIGHT_WORD_MSG_SIZE| SGL_OFFSET_6, &msg[0]);
writel(I2O_CMD_OUTBOUND_INIT<<24 | HOST_TID<<12 | ADAPTER_TID, &msg[1]);
kfree(pHba->reply_pool);
- pHba->reply_pool = (u32*)kmalloc(pHba->reply_fifo_size * REPLY_FRAME_SIZE * 4, GFP_KERNEL|ADDR32);
- if(!pHba->reply_pool){
- printk(KERN_ERR"%s: Could not allocate reply pool\n",pHba->name);
- return -1;
+ pHba->reply_pool = kzalloc(pHba->reply_fifo_size * REPLY_FRAME_SIZE * 4, GFP_KERNEL|ADDR32);
+ if (!pHba->reply_pool) {
+ printk(KERN_ERR "%s: Could not allocate reply pool\n", pHba->name);
+ return -ENOMEM;
}
- memset(pHba->reply_pool, 0 , pHba->reply_fifo_size * REPLY_FRAME_SIZE * 4);
ptr = pHba->reply_pool;
for(i = 0; i < pHba->reply_fifo_size; i++) {
kfree(sys_tbl);
- sys_tbl = kmalloc(sys_tbl_len, GFP_KERNEL|ADDR32);
- if(!sys_tbl) {
+ sys_tbl = kzalloc(sys_tbl_len, GFP_KERNEL|ADDR32);
+ if (!sys_tbl) {
printk(KERN_WARNING "SysTab Set failed. Out of memory.\n");
return -ENOMEM;
}
- memset(sys_tbl, 0, sys_tbl_len);
sys_tbl->num_entries = hba_count;
sys_tbl->version = I2OVERSION;
.name = "dpt_i2o",
.proc_name = "dpt_i2o",
.proc_info = adpt_proc_info,
- .detect = adpt_detect,
+ .detect = adpt_detect,
.release = adpt_release,
.info = adpt_info,
.queuecommand = adpt_queue,
.this_id = 7,
.cmd_per_lun = 1,
.use_clustering = ENABLE_CLUSTERING,
+ .use_sg_chaining = ENABLE_SG_CHAINING,
};
#include "scsi_module.c"
MODULE_LICENSE("GPL");
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff