#include <linux/blkdev.h> /* For block_size() */
#include <linux/delay.h> /* For ssleep/msleep */
#include <linux/device.h>
+#include <linux/slab.h>
/*
* Bucket size for counting good commands in between bad ones.
#define AIC79XX_PRECOMP_INDEX 0
#define AIC79XX_SLEWRATE_INDEX 1
#define AIC79XX_AMPLITUDE_INDEX 2
-static struct ahd_linux_iocell_opts aic79xx_iocell_info[] =
+static const struct ahd_linux_iocell_opts aic79xx_iocell_info[] =
{
AIC79XX_DEFAULT_IOOPTS,
AIC79XX_DEFAULT_IOOPTS,
" verbose Enable verbose/diagnostic logging\n"
" allow_memio Allow device registers to be memory mapped\n"
" debug Bitmask of debug values to enable\n"
-" no_reset Supress initial bus resets\n"
+" no_reset Suppress initial bus resets\n"
" extended Enable extended geometry on all controllers\n"
" periodic_otag Send an ordered tagged transaction\n"
" periodically to prevent tag starvation.\n"
static int ahd_linux_unit;
+/************************** OS Utility Wrappers *******************************/
+void ahd_delay(long);
+void
+ahd_delay(long usec)
+{
+ /*
+ * udelay on Linux can have problems for
+ * multi-millisecond waits. Wait at most
+ * 1024us per call.
+ */
+ while (usec > 0) {
+ udelay(usec % 1024);
+ usec -= 1024;
+ }
+}
+
+
+/***************************** Low Level I/O **********************************/
+uint8_t ahd_inb(struct ahd_softc * ahd, long port);
+void ahd_outb(struct ahd_softc * ahd, long port, uint8_t val);
+void ahd_outw_atomic(struct ahd_softc * ahd,
+ long port, uint16_t val);
+void ahd_outsb(struct ahd_softc * ahd, long port,
+ uint8_t *, int count);
+void ahd_insb(struct ahd_softc * ahd, long port,
+ uint8_t *, int count);
+
+uint8_t
+ahd_inb(struct ahd_softc * ahd, long port)
+{
+ uint8_t x;
+
+ if (ahd->tags[0] == BUS_SPACE_MEMIO) {
+ x = readb(ahd->bshs[0].maddr + port);
+ } else {
+ x = inb(ahd->bshs[(port) >> 8].ioport + ((port) & 0xFF));
+ }
+ mb();
+ return (x);
+}
+
+#if 0 /* unused */
+static uint16_t
+ahd_inw_atomic(struct ahd_softc * ahd, long port)
+{
+ uint8_t x;
+
+ if (ahd->tags[0] == BUS_SPACE_MEMIO) {
+ x = readw(ahd->bshs[0].maddr + port);
+ } else {
+ x = inw(ahd->bshs[(port) >> 8].ioport + ((port) & 0xFF));
+ }
+ mb();
+ return (x);
+}
+#endif
+
+void
+ahd_outb(struct ahd_softc * ahd, long port, uint8_t val)
+{
+ if (ahd->tags[0] == BUS_SPACE_MEMIO) {
+ writeb(val, ahd->bshs[0].maddr + port);
+ } else {
+ outb(val, ahd->bshs[(port) >> 8].ioport + (port & 0xFF));
+ }
+ mb();
+}
+
+void
+ahd_outw_atomic(struct ahd_softc * ahd, long port, uint16_t val)
+{
+ if (ahd->tags[0] == BUS_SPACE_MEMIO) {
+ writew(val, ahd->bshs[0].maddr + port);
+ } else {
+ outw(val, ahd->bshs[(port) >> 8].ioport + (port & 0xFF));
+ }
+ mb();
+}
+
+void
+ahd_outsb(struct ahd_softc * ahd, long port, uint8_t *array, int count)
+{
+ int i;
+
+ /*
+ * There is probably a more efficient way to do this on Linux
+ * but we don't use this for anything speed critical and this
+ * should work.
+ */
+ for (i = 0; i < count; i++)
+ ahd_outb(ahd, port, *array++);
+}
+
+void
+ahd_insb(struct ahd_softc * ahd, long port, uint8_t *array, int count)
+{
+ int i;
+
+ /*
+ * There is probably a more efficient way to do this on Linux
+ * but we don't use this for anything speed critical and this
+ * should work.
+ */
+ for (i = 0; i < count; i++)
+ *array++ = ahd_inb(ahd, port);
+}
+
+/******************************* PCI Routines *********************************/
+uint32_t
+ahd_pci_read_config(ahd_dev_softc_t pci, int reg, int width)
+{
+ switch (width) {
+ case 1:
+ {
+ uint8_t retval;
+
+ pci_read_config_byte(pci, reg, &retval);
+ return (retval);
+ }
+ case 2:
+ {
+ uint16_t retval;
+ pci_read_config_word(pci, reg, &retval);
+ return (retval);
+ }
+ case 4:
+ {
+ uint32_t retval;
+ pci_read_config_dword(pci, reg, &retval);
+ return (retval);
+ }
+ default:
+ panic("ahd_pci_read_config: Read size too big");
+ /* NOTREACHED */
+ return (0);
+ }
+}
+
+void
+ahd_pci_write_config(ahd_dev_softc_t pci, int reg, uint32_t value, int width)
+{
+ switch (width) {
+ case 1:
+ pci_write_config_byte(pci, reg, value);
+ break;
+ case 2:
+ pci_write_config_word(pci, reg, value);
+ break;
+ case 4:
+ pci_write_config_dword(pci, reg, value);
+ break;
+ default:
+ panic("ahd_pci_write_config: Write size too big");
+ /* NOTREACHED */
+ }
+}
+
/****************************** Inlines ***************************************/
-static __inline void ahd_linux_unmap_scb(struct ahd_softc*, struct scb*);
+static void ahd_linux_unmap_scb(struct ahd_softc*, struct scb*);
-static __inline void
+static void
ahd_linux_unmap_scb(struct ahd_softc *ahd, struct scb *scb)
{
struct scsi_cmnd *cmd;
bp = &buffer[0];
ahd = *(struct ahd_softc **)host->hostdata;
memset(bp, 0, sizeof(buffer));
- strcpy(bp, "Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev ");
- strcat(bp, AIC79XX_DRIVER_VERSION);
- strcat(bp, "\n");
- strcat(bp, " <");
+ strcpy(bp, "Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev " AIC79XX_DRIVER_VERSION "\n"
+ " <");
strcat(bp, ahd->description);
- strcat(bp, ">\n");
- strcat(bp, " ");
+ strcat(bp, ">\n"
+ " ");
ahd_controller_info(ahd, ahd_info);
strcat(bp, ahd_info);
return rtn;
}
-static inline struct scsi_target **
+static struct scsi_target **
ahd_linux_target_in_softc(struct scsi_target *starget)
{
struct ahd_softc *ahd =
starget->id, &tstate);
if ((flags & CFPACKETIZED) == 0) {
- /* Do not negotiate packetized transfers */
- spi_rd_strm(starget) = 0;
- spi_pcomp_en(starget) = 0;
- spi_rti(starget) = 0;
- spi_wr_flow(starget) = 0;
- spi_hold_mcs(starget) = 0;
+ /* don't negotiate packetized (IU) transfers */
+ spi_max_iu(starget) = 0;
} else {
if ((ahd->features & AHD_RTI) == 0)
spi_rti(starget) = 0;
}
if ((flags & CFQAS) == 0)
- spi_qas(starget) = 0;
+ spi_max_qas(starget) = 0;
/* Transinfo values have been set to BIOS settings */
spi_max_width(starget) = (flags & CFWIDEB) ? 1 : 0;
.max_sectors = 8192,
.cmd_per_lun = 2,
.use_clustering = ENABLE_CLUSTERING,
- .use_sg_chaining = ENABLE_SG_CHAINING,
.slave_alloc = ahd_linux_slave_alloc,
.slave_configure = ahd_linux_slave_configure,
.target_alloc = ahd_linux_target_alloc,
char *p;
char *end;
- static struct {
+ static const struct {
const char *name;
uint32_t *flag;
} options[] = {
* Lookup and commit any modified IO Cell options.
*/
if (ahd->unit < ARRAY_SIZE(aic79xx_iocell_info)) {
- struct ahd_linux_iocell_opts *iocell_opts;
+ const struct ahd_linux_iocell_opts *iocell_opts;
iocell_opts = &aic79xx_iocell_info[ahd->unit];
if (iocell_opts->precomp != AIC79XX_DEFAULT_PRECOMP)
unsigned long flags;
int nseg;
+ nseg = scsi_dma_map(cmd);
+ if (nseg < 0)
+ return SCSI_MLQUEUE_HOST_BUSY;
+
ahd_lock(ahd, &flags);
/*
if ((scb = ahd_get_scb(ahd, col_idx)) == NULL) {
ahd->flags |= AHD_RESOURCE_SHORTAGE;
ahd_unlock(ahd, &flags);
+ scsi_dma_unmap(cmd);
return SCSI_MLQUEUE_HOST_BUSY;
}
ahd_set_sense_residual(scb, 0);
scb->sg_count = 0;
- nseg = scsi_dma_map(cmd);
- BUG_ON(nseg < 0);
if (nseg > 0) {
void *sg = scb->sg_list;
struct scatterlist *cur_seg;
/*
* The sequencer will never re-reference the
* in-core SCB. To make sure we are notified
- * during reslection, set the MK_MESSAGE flag in
+ * during reselection, set the MK_MESSAGE flag in
* the card's copy of the SCB.
*/
ahd_outb(ahd, SCB_CONTROL,
uint8_t precomp;
if (ahd->unit < ARRAY_SIZE(aic79xx_iocell_info)) {
- struct ahd_linux_iocell_opts *iocell_opts;
+ const struct ahd_linux_iocell_opts *iocell_opts;
iocell_opts = &aic79xx_iocell_info[ahd->unit];
precomp = iocell_opts->precomp;
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff