[SCSI] hptiop: backout ioctl mess

[safe/jmp/linux-2.6] / drivers / scsi / advansys.c

diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 37ec541..e32b4ab 100644 (file)
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -114,7 +114,7 @@
           #include "advansys.h"
           #endif
 
-        and after "static Scsi_Host_Template builtin_scsi_hosts[] =":
+        and after "static struct scsi_host_template builtin_scsi_hosts[] =":
 
           #ifdef CONFIG_SCSI_ADVANSYS
           ADVANSYS,
@@ -160,7 +160,7 @@
            --- Driver Structures
            --- Driver Data
            --- Driver Function Prototypes
-           --- Linux 'Scsi_Host_Template' and advansys_setup() Functions
+           --- Linux 'struct scsi_host_template' and advansys_setup() Functions
            --- Loadable Driver Support
            --- Miscellaneous Driver Functions
            --- Functions Required by the Asc Library
@@ -371,7 +371,7 @@
 
      1.5 (8/8/96):
          1. Add support for ABP-940U (PCI Ultra) adapter.
-         2. Add support for IRQ sharing by setting the SA_SHIRQ flag for
+         2. Add support for IRQ sharing by setting the IRQF_SHARED flag for
             request_irq and supplying a dev_id pointer to both request_irq()
             and free_irq().
          3. In AscSearchIOPortAddr11() restore a call to check_region() which
@@ -504,9 +504,9 @@
          3. For v2.1.93 and newer kernels use CONFIG_PCI and new PCI BIOS
             access functions.
          4. Update board serial number printing.
-         5. Try allocating an IRQ both with and without the SA_INTERRUPT
+         5. Try allocating an IRQ both with and without the IRQF_DISABLED
             flag set to allow IRQ sharing with drivers that do not set
-            the SA_INTERRUPT flag. Also display a more descriptive error
+            the IRQF_DISABLED flag. Also display a more descriptive error
             message if request_irq() fails.
          6. Update to latest Asc and Adv Libraries.
 
@@ -754,7 +754,6 @@
  * --- Linux Include Files
  */
 
-#include <linux/config.h>
 #include <linux/module.h>
 
 #if defined(CONFIG_X86) && !defined(CONFIG_ISA)
@@ -2051,7 +2050,7 @@ STATIC ASC_DCNT  AscGetMaxDmaCount(ushort);
 #define ADV_VADDR_TO_U32   virt_to_bus
 #define ADV_U32_TO_VADDR   bus_to_virt
 
-#define AdvPortAddr  ulong              /* Virtual memory address size */
+#define AdvPortAddr  void __iomem *     /* Virtual memory address size */
 
 /*
  * Define Adv Library required memory access macros.
@@ -4068,7 +4067,7 @@ STATIC void         asc_prt_hex(char *f, uchar *, int);
 
 
 /*
- * --- Linux 'Scsi_Host_Template' and advansys_setup() Functions
+ * --- Linux 'struct scsi_host_template' and advansys_setup() Functions
  */
 
 #ifdef CONFIG_PROC_FS
@@ -5203,19 +5202,19 @@ advansys_detect(struct scsi_host_template *tpnt)
             /* Register IRQ Number. */
             ASC_DBG1(2, "advansys_detect: request_irq() %d\n", shp->irq);
            /*
-            * If request_irq() fails with the SA_INTERRUPT flag set,
-            * then try again without the SA_INTERRUPT flag set. This
+            * If request_irq() fails with the IRQF_DISABLED flag set,
+            * then try again without the IRQF_DISABLED flag set. This
             * allows IRQ sharing to work even with other drivers that
-            * do not set the SA_INTERRUPT flag.
+            * do not set the IRQF_DISABLED flag.
             *
-            * If SA_INTERRUPT is not set, then interrupts are enabled
+            * If IRQF_DISABLED is not set, then interrupts are enabled
             * before the driver interrupt function is called.
             */
             if (((ret = request_irq(shp->irq, advansys_interrupt,
-                            SA_INTERRUPT | (share_irq == TRUE ? SA_SHIRQ : 0),
+                            IRQF_DISABLED | (share_irq == TRUE ? IRQF_SHARED : 0),
                             "advansys", boardp)) != 0) &&
                 ((ret = request_irq(shp->irq, advansys_interrupt,
-                            (share_irq == TRUE ? SA_SHIRQ : 0),
+                            (share_irq == TRUE ? IRQF_SHARED : 0),
                             "advansys", boardp)) != 0))
             {
                 if (ret == -EBUSY) {
@@ -5402,10 +5401,8 @@ advansys_detect(struct scsi_host_template *tpnt)
                 release_region(shp->io_port, boardp->asc_n_io_port);
                 if (ASC_WIDE_BOARD(boardp)) {
                     iounmap(boardp->ioremap_addr);
-                    if (boardp->orig_carrp) {
-                        kfree(boardp->orig_carrp);
-                        boardp->orig_carrp = NULL;
-                    }
+                    kfree(boardp->orig_carrp);
+                    boardp->orig_carrp = NULL;
                     if (boardp->orig_reqp) {
                         kfree(boardp->orig_reqp);
                         boardp->orig_reqp = boardp->adv_reqp = NULL;
@@ -5457,10 +5454,8 @@ advansys_release(struct Scsi_Host *shp)
         adv_sgblk_t    *sgp = NULL;
 
         iounmap(boardp->ioremap_addr);
-        if (boardp->orig_carrp) {
-            kfree(boardp->orig_carrp);
-            boardp->orig_carrp = NULL;
-        }
+        kfree(boardp->orig_carrp);
+        boardp->orig_carrp = NULL;
         if (boardp->orig_reqp) {
             kfree(boardp->orig_reqp);
             boardp->orig_reqp = boardp->adv_reqp = NULL;
@@ -12378,7 +12373,7 @@ AscInitFromEEP(ASC_DVC_VAR *asc_dvc)
                 ASC_PRINT1(
 "AscInitFromEEP: Failed to re-write EEPROM with %d errors.\n", i);
         } else {
-                ASC_PRINT("AscInitFromEEP: Succesfully re-wrote EEPROM.");
+                ASC_PRINT("AscInitFromEEP: Successfully re-wrote EEPROM.\n");
         }
     }
     return (warn_code);
@@ -17320,7 +17315,7 @@ AdvWaitEEPCmd(AdvPortAddr iop_base)
 /*
  * Write the EEPROM from 'cfg_buf'.
  */
-void
+void __init
 AdvSet3550EEPConfig(AdvPortAddr iop_base, ADVEEP_3550_CONFIG *cfg_buf)
 {
     ushort *wbuf;
@@ -17387,7 +17382,7 @@ AdvSet3550EEPConfig(AdvPortAddr iop_base, ADVEEP_3550_CONFIG *cfg_buf)
 /*
  * Write the EEPROM from 'cfg_buf'.
  */
-void
+void __init
 AdvSet38C0800EEPConfig(AdvPortAddr iop_base,
                        ADVEEP_38C0800_CONFIG *cfg_buf)
 {
@@ -17455,7 +17450,7 @@ AdvSet38C0800EEPConfig(AdvPortAddr iop_base,
 /*
  * Write the EEPROM from 'cfg_buf'.
  */
-void
+void __init
 AdvSet38C1600EEPConfig(AdvPortAddr iop_base,
                        ADVEEP_38C1600_CONFIG *cfg_buf)
 {