#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
-#include <linux/dma-mapping.h>
#include <linux/syscalls.h>
#include <linux/delay.h>
-#include <linux/smp_lock.h>
#include <linux/kthread.h>
#include <asm/semaphore.h>
static int aac_cfg_major = -1;
char aac_driver_version[] = AAC_DRIVER_FULL_VERSION;
-extern int expose_physicals;
-
/*
* Because of the way Linux names scsi devices, the order in this table has
* become important. Check for on-board Raid first, add-in cards second.
{ aac_rx_init, "percraid", "DELL ", "PERC 320/DC ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Perc 320/DC*/
{ aac_sa_init, "aacraid", "ADAPTEC ", "Adaptec 5400S ", 4, AAC_QUIRK_34SG }, /* Adaptec 5400S (Mustang)*/
{ aac_sa_init, "aacraid", "ADAPTEC ", "AAC-364 ", 4, AAC_QUIRK_34SG }, /* Adaptec 5400S (Mustang)*/
- { aac_sa_init, "percraid", "DELL ", "PERCRAID ", 4, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Dell PERC2/QC */
+ { aac_sa_init, "percraid", "DELL ", "PERCRAID ", 4, AAC_QUIRK_34SG }, /* Dell PERC2/QC */
{ aac_sa_init, "hpnraid", "HP ", "NetRAID ", 4, AAC_QUIRK_34SG }, /* HP NetRAID-4M */
{ aac_rx_init, "aacraid", "DELL ", "RAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Dell Catchall */
{ aac_rx_init, "aacraid", "Legend ", "RAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Legend Catchall */
- { aac_rx_init, "aacraid", "ADAPTEC ", "RAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Adaptec Catch All */
+ { aac_rx_init, "aacraid", "ADAPTEC ", "RAID ", 2 }, /* Adaptec Catch All */
{ aac_rkt_init, "aacraid", "ADAPTEC ", "RAID ", 2 }, /* Adaptec Rocket Catch All */
{ aac_nark_init, "aacraid", "ADAPTEC ", "RAID ", 2 } /* Adaptec NEMER/ARK Catch All */
};
(cmd->SCp.phase == AAC_OWNER_FIRMWARE))
return 0; /* Already owned by Adapter */
}
- cmd->scsi_done = done;
cmd->SCp.phase = AAC_OWNER_LOWLEVEL;
return (aac_scsi_cmd(cmd) ? FAILED : 0);
}
static int aac_slave_configure(struct scsi_device *sdev)
{
- if (sdev_channel(sdev) == CONTAINER_CHANNEL) {
- sdev->skip_ms_page_8 = 1;
- sdev->skip_ms_page_3f = 1;
- }
if ((sdev->type == TYPE_DISK) &&
(sdev_channel(sdev) != CONTAINER_CHANNEL)) {
if (expose_physicals == 0)
return 0;
}
+/**
+ * aac_change_queue_depth - alter queue depths
+ * @sdev: SCSI device we are considering
+ * @depth: desired queue depth
+ *
+ * Alters queue depths for target device based on the host adapter's
+ * total capacity and the queue depth supported by the target device.
+ */
+
+static int aac_change_queue_depth(struct scsi_device *sdev, int depth)
+{
+ if (sdev->tagged_supported && (sdev->type == TYPE_DISK) &&
+ (sdev_channel(sdev) == CONTAINER_CHANNEL)) {
+ struct scsi_device * dev;
+ struct Scsi_Host *host = sdev->host;
+ unsigned num = 0;
+
+ __shost_for_each_device(dev, host) {
+ if (dev->tagged_supported && (dev->type == TYPE_DISK) &&
+ (sdev_channel(dev) == CONTAINER_CHANNEL))
+ ++num;
+ ++num;
+ }
+ if (num >= host->can_queue)
+ num = host->can_queue - 1;
+ if (depth > (host->can_queue - num))
+ depth = host->can_queue - num;
+ if (depth > 256)
+ depth = 256;
+ else if (depth < 2)
+ depth = 2;
+ scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, depth);
+ } else
+ scsi_adjust_queue_depth(sdev, 0, 1);
+ return sdev->queue_depth;
+}
+
static int aac_ioctl(struct scsi_device *sdev, int cmd, void __user * arg)
{
struct aac_dev *dev = (struct aac_dev *)sdev->host->hostdata;
static int aac_eh_abort(struct scsi_cmnd* cmd)
{
- struct Scsi_Host * host = cmd->device->host;
+ struct scsi_device * dev = cmd->device;
+ struct Scsi_Host * host = dev->host;
struct aac_dev * aac = (struct aac_dev *)host->hostdata;
int count;
int ret = FAILED;
printk(KERN_ERR "%s: Host adapter abort request (%d,%d,%d,%d)\n",
AAC_DRIVERNAME,
- cmd->device->host->host_no, sdev_channel(cmd->device),
- sdev_id(cmd->device), cmd->device->lun);
+ host->host_no, sdev_channel(dev), sdev_id(dev), dev->lun);
switch (cmd->cmnd[0]) {
case SERVICE_ACTION_IN:
if (!(aac->raw_io_interface) ||
ssleep(1);
}
printk(KERN_ERR "%s: SCSI bus appears hung\n", AAC_DRIVERNAME);
+ /*
+ * This adapter needs a blind reset, only do so for Adapters that
+ * support a register, instead of a commanded, reset.
+ */
+ if ((aac->supplement_adapter_info.SupportedOptions2 &
+ le32_to_cpu(AAC_OPTION_MU_RESET|AAC_OPTION_IGNORE_RESET)) ==
+ le32_to_cpu(AAC_OPTION_MU_RESET))
+ aac_reset_adapter(aac, 2); /* Bypass wait for command quiesce */
return SUCCESS; /* Cause an immediate retry of the command with a ten second delay after successful tur */
}
static int aac_cfg_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
return aac_do_ioctl(file->private_data, cmd, (void __user *)arg);
}
static long aac_compat_cfg_ioctl(struct file *file, unsigned cmd, unsigned long arg)
{
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
return aac_compat_do_ioctl((struct aac_dev *)file->private_data, cmd, arg);
}
#endif
return len;
}
-static ssize_t aac_show_serial_number(struct class_device *class_dev,
- char *buf)
+ssize_t aac_show_serial_number(struct class_device *class_dev, char *buf)
{
struct aac_dev *dev = (struct aac_dev*)class_to_shost(class_dev)->hostdata;
int len = 0;
if (le32_to_cpu(dev->adapter_info.serial[0]) != 0xBAD0)
- len = snprintf(buf, PAGE_SIZE, "%x\n",
+ len = snprintf(buf, PAGE_SIZE, "%06X\n",
le32_to_cpu(dev->adapter_info.serial[0]));
+ if (len &&
+ !memcmp(&dev->supplement_adapter_info.MfgPcbaSerialNo[
+ sizeof(dev->supplement_adapter_info.MfgPcbaSerialNo)+2-len],
+ buf, len))
+ len = snprintf(buf, PAGE_SIZE, "%.*s\n",
+ (int)sizeof(dev->supplement_adapter_info.MfgPcbaSerialNo),
+ dev->supplement_adapter_info.MfgPcbaSerialNo);
return len;
}
class_to_shost(class_dev)->max_id);
}
+static ssize_t aac_store_reset_adapter(struct class_device *class_dev,
+ const char *buf, size_t count)
+{
+ int retval = -EACCES;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return retval;
+ retval = aac_reset_adapter((struct aac_dev*)class_to_shost(class_dev)->hostdata, buf[0] == '!');
+ if (retval >= 0)
+ retval = count;
+ return retval;
+}
+
+static ssize_t aac_show_reset_adapter(struct class_device *class_dev,
+ char *buf)
+{
+ struct aac_dev *dev = (struct aac_dev*)class_to_shost(class_dev)->hostdata;
+ int len, tmp;
+
+ tmp = aac_adapter_check_health(dev);
+ if ((tmp == 0) && dev->in_reset)
+ tmp = -EBUSY;
+ len = snprintf(buf, PAGE_SIZE, "0x%x\n", tmp);
+ return len;
+}
static struct class_device_attribute aac_model = {
.attr = {
},
.show = aac_show_max_id,
};
+static struct class_device_attribute aac_reset = {
+ .attr = {
+ .name = "reset_host",
+ .mode = S_IWUSR|S_IRUGO,
+ },
+ .store = aac_store_reset_adapter,
+ .show = aac_show_reset_adapter,
+};
static struct class_device_attribute *aac_attrs[] = {
&aac_model,
&aac_serial_number,
&aac_max_channel,
&aac_max_id,
+ &aac_reset,
NULL
};
.bios_param = aac_biosparm,
.shost_attrs = aac_attrs,
.slave_configure = aac_slave_configure,
+ .change_queue_depth = aac_change_queue_depth,
.eh_abort_handler = aac_eh_abort,
.eh_host_reset_handler = aac_eh_reset,
.can_queue = AAC_NUM_IO_FIB,
.emulated = 1,
};
+static void __aac_shutdown(struct aac_dev * aac)
+{
+ kthread_stop(aac->thread);
+ aac_send_shutdown(aac);
+ aac_adapter_disable_int(aac);
+ free_irq(aac->pdev->irq, aac);
+}
+
static int __devinit aac_probe_one(struct pci_dev *pdev,
const struct pci_device_id *id)
{
return 0;
out_deinit:
- kthread_stop(aac->thread);
- aac_send_shutdown(aac);
- aac_adapter_disable_int(aac);
- free_irq(pdev->irq, aac);
+ __aac_shutdown(aac);
out_unmap:
aac_fib_map_free(aac);
- pci_free_consistent(aac->pdev, aac->comm_size, aac->comm_addr, aac->comm_phys);
+ if (aac->comm_addr)
+ pci_free_consistent(aac->pdev, aac->comm_size, aac->comm_addr,
+ aac->comm_phys);
kfree(aac->queues);
aac_adapter_ioremap(aac, 0);
kfree(aac->fibs);
static void aac_shutdown(struct pci_dev *dev)
{
struct Scsi_Host *shost = pci_get_drvdata(dev);
- struct aac_dev *aac = (struct aac_dev *)shost->hostdata;
- aac_send_shutdown(aac);
+ scsi_block_requests(shost);
+ __aac_shutdown((struct aac_dev *)shost->hostdata);
}
static void __devexit aac_remove_one(struct pci_dev *pdev)
scsi_remove_host(shost);
- kthread_stop(aac->thread);
-
- aac_send_shutdown(aac);
- aac_adapter_disable_int(aac);
+ __aac_shutdown(aac);
aac_fib_map_free(aac);
pci_free_consistent(aac->pdev, aac->comm_size, aac->comm_addr,
aac->comm_phys);
kfree(aac->queues);
- free_irq(pdev->irq, aac);
aac_adapter_ioremap(aac, 0);
kfree(aac->fibs);
{
int error;
- printk(KERN_INFO "Adaptec %s driver (%s)\n",
+ printk(KERN_INFO "Adaptec %s driver %s\n",
AAC_DRIVERNAME, aac_driver_version);
error = pci_register_driver(&aac_pci_driver);
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff