/*
* Adaptec AAC series RAID controller driver
- * (c) Copyright 2001 Red Hat Inc. <alan@redhat.com>
+ * (c) Copyright 2001 Red Hat Inc.
*
* based on the old aacraid driver that is..
* Adaptec aacraid device driver for Linux.
*/
static int nondasd = -1;
-static int aac_cache;
+static int aac_cache = 2; /* WCE=0 to avoid performance problems */
static int dacmode = -1;
int aac_msi;
int aac_commit = -1;
MODULE_PARM_DESC(cache, "Disable Queue Flush commands:\n"
"\tbit 0 - Disable FUA in WRITE SCSI commands\n"
"\tbit 1 - Disable SYNCHRONIZE_CACHE SCSI command\n"
- "\tbit 2 - Disable only if Battery not protecting Cache");
+ "\tbit 2 - Disable only if Battery is protecting Cache");
module_param(dacmode, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(dacmode, "Control whether dma addressing is using 64 bit DAC."
" 0=off, 1=on");
module_param_named(reset_devices, aac_reset_devices, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(reset_devices, "Force an adapter reset at initialization.");
+int aac_wwn = 1;
+module_param_named(wwn, aac_wwn, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(wwn, "Select a WWN type for the arrays:\n"
+ "\t0 - Disable\n"
+ "\t1 - Array Meta Data Signature (default)\n"
+ "\t2 - Adapter Serial Number");
+
+
static inline int aac_valid_context(struct scsi_cmnd *scsicmd,
struct fib *fibptr) {
struct scsi_device *device;
srbcmd->id = cpu_to_le32(scmd_id(cmd));
srbcmd->lun = cpu_to_le32(cmd->device->lun);
srbcmd->flags = cpu_to_le32(flag);
- timeout = cmd->timeout_per_command/HZ;
+ timeout = cmd->request->timeout/HZ;
if (timeout == 0)
timeout = 1;
srbcmd->timeout = cpu_to_le32(timeout); // timeout in seconds
static int aac_scsi_32_64(struct fib * fib, struct scsi_cmnd * cmd)
{
- if ((sizeof(dma_addr_t) > 4) &&
- (num_physpages > (0xFFFFFFFFULL >> PAGE_SHIFT)) &&
- (fib->dev->adapter_info.options & AAC_OPT_SGMAP_HOST64))
+ if ((sizeof(dma_addr_t) > 4) && fib->dev->needs_dac &&
+ (fib->dev->adapter_info.options & AAC_OPT_SGMAP_HOST64))
return FAILED;
return aac_scsi_32(fib, cmd);
}
if (dev->nondasd_support && !dev->in_reset)
printk(KERN_INFO "%s%d: Non-DASD support enabled.\n",dev->name, dev->id);
+ if (dma_get_required_mask(&dev->pdev->dev) > DMA_32BIT_MASK)
+ dev->needs_dac = 1;
dev->dac_support = 0;
- if( (sizeof(dma_addr_t) > 4) && (dev->adapter_info.options & AAC_OPT_SGMAP_HOST64)){
+ if ((sizeof(dma_addr_t) > 4) && dev->needs_dac &&
+ (dev->adapter_info.options & AAC_OPT_SGMAP_HOST64)) {
if (!dev->in_reset)
printk(KERN_INFO "%s%d: 64bit support enabled.\n",
dev->name, dev->id);
if(dacmode != -1) {
dev->dac_support = (dacmode!=0);
}
+
+ /* avoid problems with AAC_QUIRK_SCSI_32 controllers */
+ if (dev->dac_support && (aac_get_driver_ident(dev->cardtype)->quirks
+ & AAC_QUIRK_SCSI_32)) {
+ dev->nondasd_support = 0;
+ dev->jbod = 0;
+ expose_physicals = 0;
+ }
+
if(dev->dac_support != 0) {
- if (!pci_set_dma_mask(dev->pdev, DMA_64BIT_MASK) &&
- !pci_set_consistent_dma_mask(dev->pdev, DMA_64BIT_MASK)) {
+ if (!pci_set_dma_mask(dev->pdev, DMA_BIT_MASK(64)) &&
+ !pci_set_consistent_dma_mask(dev->pdev, DMA_BIT_MASK(64))) {
if (!dev->in_reset)
printk(KERN_INFO"%s%d: 64 Bit DAC enabled\n",
dev->name, dev->id);
dprintk((KERN_DEBUG "INQUIRY command, ID: %d.\n", cid));
memset(&inq_data, 0, sizeof (struct inquiry_data));
- if (scsicmd->cmnd[1] & 0x1) {
+ if ((scsicmd->cmnd[1] & 0x1) && aac_wwn) {
char *arr = (char *)&inq_data;
/* EVPD bit set */
arr[1] = scsicmd->cmnd[2];
scsi_sg_copy_from_buffer(scsicmd, &inq_data,
sizeof(inq_data));
- return aac_get_container_serial(scsicmd);
+ if (aac_wwn != 2)
+ return aac_get_container_serial(
+ scsicmd);
+ /* SLES 10 SP1 special */
+ scsicmd->result = DID_OK << 16 |
+ COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
} else {
/* vpd page not implemented */
scsicmd->result = DID_OK << 16 |