You also need to say Y here if you have a device which speaks
the SCSI protocol. Examples of this include the parallel port
version of the IOMEGA ZIP drive, USB storage devices, Fibre
- Channel, FireWire storage and the IDE-SCSI emulation driver.
+ Channel, and FireWire storage.
To compile this driver as a module, choose M here and read
<file:Documentation/scsi/scsi.txt>.
config BLK_DEV_SD
tristate "SCSI disk support"
depends on SCSI
+ select CRC_T10DIF if BLK_DEV_INTEGRITY
---help---
If you want to use SCSI hard disks, Fibre Channel disks,
Serial ATA (SATA) or Parallel ATA (PATA) hard disks,
---help---
The OnStream SC-x0 SCSI tape drives cannot be driven by the
standard st driver, but instead need this special osst driver and
- use the /dev/osstX char device nodes (major 206). Via usb-storage
- and ide-scsi, you may be able to drive the USB-x0 and DI-x0 drives
- as well. Note that there is also a second generation of OnStream
+ use the /dev/osstX char device nodes (major 206). Via usb-storage,
+ you may be able to drive the USB-x0 and DI-x0 drives as well.
+ Note that there is also a second generation of OnStream
tape drives (ADR-x0) that supports the standard SCSI-2 commands for
tapes (QIC-157) and can be driven by the standard driver st.
For more information, you may have a look at the SCSI-HOWTO
don't need this for those tiny 6-slot cdrom changers. Media
changers are listed as "Type: Medium Changer" in /proc/scsi/scsi.
If you have such hardware and want to use it with linux, say Y
- here. Check <file:Documentation/scsi-changer.txt> for details.
+ here. Check <file:Documentation/scsi/scsi-changer.txt> for details.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/kbuild/modules.txt> and
- <file:Documentation/scsi.txt>. The module will be called ch.o.
+ <file:Documentation/scsi/scsi.txt>. The module will be called ch.o.
If unsure, say N.
-
+
+config SCSI_ENCLOSURE
+ tristate "SCSI Enclosure Support"
+ depends on SCSI && ENCLOSURE_SERVICES
+ help
+ Enclosures are devices sitting on or in SCSI backplanes that
+ manage devices. If you have a disk cage, the chances are that
+ it has an enclosure device. Selecting this option will just allow
+ certain enclosure conditions to be reported and is not required.
comment "Some SCSI devices (e.g. CD jukebox) support multiple LUNs"
depends on SCSI
can enable logging by saying Y to "/proc file system support" and
"Sysctl support" below and executing the command
- echo "scsi log token [level]" > /proc/scsi/scsi
+ echo <bitmask> > /proc/sys/dev/scsi/logging_level
- at boot time after the /proc file system has been mounted.
+ where <bitmask> is a four byte value representing the logging type
+ and logging level for each type of logging selected.
- There are a number of things that can be used for 'token' (you can
- find them in the source: <file:drivers/scsi/scsi.c>), and this
- allows you to select the types of information you want, and the
- level allows you to select the level of verbosity.
+ There are a number of logging types and you can find them in the
+ source at <file:drivers/scsi/scsi_logging.h>. The logging levels
+ are also described in that file and they determine the verbosity of
+ the logging for each logging type.
If you say N here, it may be harder to track down some types of SCSI
problems. If you say Y here your kernel will be somewhat larger, but
depends on SCSI!=n
default y
-if SCSI_LOWLEVEL
+if SCSI_LOWLEVEL && SCSI
config ISCSI_TCP
tristate "iSCSI Initiator over TCP/IP"
The userspace component needed to initialize the driver, documentation,
and sample configuration files can be found here:
- http://linux-iscsi.sf.net
+ http://open-iscsi.org
+
+source "drivers/scsi/cxgb3i/Kconfig"
config SGIWD93_SCSI
tristate "SGI WD93C93 SCSI Driver"
- depends on SGI_IP22 && SCSI
+ depends on SGI_HAS_WD93 && SCSI
help
If you have a Western Digital WD93 SCSI controller on
an SGI MIPS system, say Y. Otherwise, say N.
-config SCSI_DECNCR
- tristate "DEC NCR53C94 Scsi Driver"
- depends on MACH_DECSTATION && SCSI && TC
- help
- Say Y here to support the NCR53C94 SCSI controller chips on IOASIC
- based TURBOchannel DECstations and TURBOchannel PMAZ-A cards.
-
-config SCSI_DECSII
- tristate "DEC SII Scsi Driver"
- depends on MACH_DECSTATION && SCSI && 32BIT
-
config BLK_DEV_3W_XXXX_RAID
tristate "3ware 5/6/7/8xxx ATA-RAID support"
depends on PCI && SCSI
config SCSI_7000FASST
tristate "7000FASST SCSI support"
depends on ISA && SCSI && ISA_DMA_API
+ select CHECK_SIGNATURE
help
This driver supports the Western Digital 7000 SCSI host adapter
family. Some information is in the source:
tristate "Adaptec AHA152X/2825 support"
depends on ISA && SCSI && !64BIT
select SCSI_SPI_ATTRS
+ select CHECK_SIGNATURE
---help---
This is a driver for the AHA-1510, AHA-1520, AHA-1522, and AHA-2825
SCSI host adapters. It also works for the AVA-1505, but the IRQ etc.
source "drivers/scsi/aic7xxx/Kconfig.aic79xx"
source "drivers/scsi/aic94xx/Kconfig"
-# All the I2O code and drivers do not seem to be 64bit safe.
config SCSI_DPT_I2O
tristate "Adaptec I2O RAID support "
- depends on !64BIT && SCSI && PCI && VIRT_TO_BUS
+ depends on SCSI && PCI && VIRT_TO_BUS
help
This driver supports all of Adaptec's I2O based RAID controllers as
well as the DPT SmartRaid V cards. This is an Adaptec maintained
config SCSI_ADVANSYS
tristate "AdvanSys SCSI support"
- depends on SCSI
+ depends on SCSI && VIRT_TO_BUS
depends on ISA || EISA || PCI
help
This is a driver for all SCSI host adapters manufactured by
To enable this function, choose Y here.
source "drivers/scsi/megaraid/Kconfig.megaraid"
+source "drivers/scsi/mpt2sas/Kconfig"
config SCSI_HPTIOP
- tristate "HighPoint RocketRAID 3xxx Controller support"
+ tristate "HighPoint RocketRAID 3xxx/4xxx Controller support"
depends on SCSI && PCI
help
- This option enables support for HighPoint RocketRAID 3xxx
+ This option enables support for HighPoint RocketRAID 3xxx/4xxx
controllers.
To compile this driver as a module, choose M here; the module
<http://www.tldp.org/docs.html#howto>, and the files
<file:Documentation/scsi/BusLogic.txt> and
<file:Documentation/scsi/FlashPoint.txt> for more information.
+ Note that support for FlashPoint is only available for 32-bit
+ x86 configurations.
To compile this driver as a module, choose M here: the
module will be called BusLogic.
-config SCSI_OMIT_FLASHPOINT
- bool "Omit FlashPoint support"
- depends on SCSI_BUSLOGIC
+config SCSI_FLASHPOINT
+ bool "FlashPoint support"
+ depends on SCSI_BUSLOGIC && PCI && X86_32
help
- This option allows you to omit the FlashPoint support from the
+ This option allows you to add FlashPoint support to the
BusLogic SCSI driver. The FlashPoint SCCB Manager code is
- substantial, so users of MultiMaster Host Adapters may wish to omit
- it.
+ substantial, so users of MultiMaster Host Adapters may not
+ wish to include it.
+
+config LIBFC
+ tristate "LibFC module"
+ select SCSI_FC_ATTRS
+ select CRC32
+ ---help---
+ Fibre Channel library module
+
+config FCOE
+ tristate "FCoE module"
+ depends on PCI
+ select LIBFC
+ ---help---
+ Fibre Channel over Ethernet module
config SCSI_DMX3191D
tristate "DMX3191D SCSI support"
tristate "DTC3180/3280 SCSI support"
depends on ISA && SCSI
select SCSI_SPI_ATTRS
+ select CHECK_SIGNATURE
help
This is support for DTC 3180/3280 SCSI Host Adapters. Please read
the SCSI-HOWTO, available from
config SCSI_FUTURE_DOMAIN
tristate "Future Domain 16xx SCSI/AHA-2920A support"
depends on (ISA || PCI) && SCSI
+ select CHECK_SIGNATURE
---help---
This is support for Future Domain's 16-bit SCSI host adapters
(TMC-1660/1680, TMC-1650/1670, TMC-3260, TMC-1610M/MER/MEX) and
This is a driver for RAID/SCSI Disk Array Controllers (EISA/ISA/PCI)
manufactured by Intel Corporation/ICP vortex GmbH. It is documented
in the kernel source in <file:drivers/scsi/gdth.c> and
- <file:drivers/scsi/gdth.h.>
+ <file:drivers/scsi/gdth.h>.
To compile this driver as a module, choose M here: the
module will be called gdth.
tristate "IBM Virtual SCSI support"
depends on PPC_PSERIES || PPC_ISERIES
select SCSI_SRP_ATTRS
+ select VIOPATH if PPC_ISERIES
help
This is the IBM POWER Virtual SCSI Client
To compile this driver as a module, choose M here: the
module will be called ibmvstgt.
+config SCSI_IBMVFC
+ tristate "IBM Virtual FC support"
+ depends on PPC_PSERIES && SCSI
+ select SCSI_FC_ATTRS
+ help
+ This is the IBM POWER Virtual FC Client
+
+ To compile this driver as a module, choose M here: the
+ module will be called ibmvfc.
+
+config SCSI_IBMVFC_TRACE
+ bool "enable driver internal trace"
+ depends on SCSI_IBMVFC
+ default y
+ help
+ If you say Y here, the driver will trace all commands issued
+ to the adapter. Performance impact is minimal. Trace can be
+ dumped using /sys/class/scsi_host/hostXX/trace.
+
config SCSI_INITIO
tristate "Initio 9100U(W) support"
depends on PCI && SCSI
Generally, saying N is fine.
+config SCSI_MVSAS
+ tristate "Marvell 88SE6440 SAS/SATA support"
+ depends on PCI && SCSI
+ select SCSI_SAS_LIBSAS
+ help
+ This driver supports Marvell SAS/SATA PCI devices.
+
+ To compiler this driver as a module, choose M here: the module
+ will be called mvsas.
+
config SCSI_NCR53C406A
tristate "NCR53c406a SCSI support"
depends on ISA && SCSI
not allow targets to disconnect is not reasonable if there is more
than 1 device on a SCSI bus. The normal answer therefore is N.
-config SCSI_MCA_53C9X
- tristate "NCR MCA 53C9x SCSI support"
- depends on MCA_LEGACY && SCSI && BROKEN_ON_SMP
- help
- Some MicroChannel machines, notably the NCR 35xx line, use a SCSI
- controller based on the NCR 53C94. This driver will allow use of
- the controller on the 3550, and very possibly others.
-
- To compile this driver as a module, choose M here: the
- module will be called mca_53c9x.
-
config SCSI_PAS16
tristate "PAS16 SCSI support"
depends on ISA && SCSI
To compile this driver as a module, choose M here: the
module will be called pas16.
-config SCSI_PSI240I
- tristate "PSI240i support"
- depends on ISA && SCSI
- help
- This is support for the PSI240i EIDE interface card which acts as a
- SCSI host adapter. Please read the SCSI-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here: the
- module will be called psi240i.
-
config SCSI_QLOGIC_FAS
tristate "Qlogic FAS SCSI support"
depends on ISA && SCSI
To compile this driver as a module, choose M here: the
module will be called qlogicfas.
-config SCSI_QLOGIC_FC_FIRMWARE
- bool "Include loadable firmware in driver"
- depends on SCSI_QLOGIC_FC
- help
- Say Y to include ISP2X00 Fabric Initiator/Target Firmware, with
- expanded LUN addressing and FcTape (FCP-2) support, in the
- qlogicfc driver. This is required on some platforms.
-
config SCSI_QLOGIC_1280
tristate "Qlogic QLA 1240/1x80/1x160 SCSI support"
depends on PCI && SCSI
This lpfc driver supports the Emulex LightPulse
Family of Fibre Channel PCI host adapters.
-config SCSI_SEAGATE
- tristate "Seagate ST-02 and Future Domain TMC-8xx SCSI support"
- depends on X86 && ISA && SCSI
- ---help---
- These are 8-bit SCSI controllers; the ST-01 is also supported by
- this driver. It is explained in section 3.9 of the SCSI-HOWTO,
- available from <http://www.tldp.org/docs.html#howto>. If it
- doesn't work out of the box, you may have to change some macros at
- compiletime, which are described in <file:drivers/scsi/seagate.c>.
-
- To compile this driver as a module, choose M here: the
- module will be called seagate.
+config SCSI_LPFC_DEBUG_FS
+ bool "Emulex LightPulse Fibre Channel debugfs Support"
+ depends on SCSI_LPFC && DEBUG_FS
+ help
+ This makes debugging infomation from the lpfc driver
+ available via the debugfs filesystem.
-# definitely looks not 64bit safe:
config SCSI_SIM710
tristate "Simple 53c710 SCSI support (Compaq, NCR machines)"
depends on (EISA || MCA) && SCSI
tristate "Trantor T128/T128F/T228 SCSI support"
depends on ISA && SCSI
select SCSI_SPI_ATTRS
+ select CHECK_SIGNATURE
---help---
This is support for a SCSI host adapter. It is explained in section
3.11 of the SCSI-HOWTO, available from
config SCSI_DEBUG
tristate "SCSI debugging host simulator"
depends on SCSI
+ select CRC_T10DIF
help
This is a host adapter simulator that can simulate multiple hosts
each with multiple dummy SCSI devices (disks). It defaults to one
built-in SCSI controller, say Y. Otherwise, say N.
To compile this driver as a module, choose M here: the
- module will be called wd33c93.
+ module will be called a3000.
config A2091_SCSI
tristate "A2091/A590 WD33C93A support"
say N.
To compile this driver as a module, choose M here: the
- module will be called wd33c93.
+ module will be called a2091.
config GVP11_SCSI
tristate "GVP Series II WD33C93A support"
To compile this driver as a module, choose M here: the
module will be called gvp11.
-config CYBERSTORM_SCSI
- tristate "CyberStorm SCSI support"
- depends on ZORRO && SCSI
- help
- If you have an Amiga with an original (MkI) Phase5 Cyberstorm
- accelerator board and the optional Cyberstorm SCSI controller,
- answer Y. Otherwise, say N.
-
-config CYBERSTORMII_SCSI
- tristate "CyberStorm Mk II SCSI support"
- depends on ZORRO && SCSI
- help
- If you have an Amiga with a Phase5 Cyberstorm MkII accelerator board
- and the optional Cyberstorm SCSI controller, say Y. Otherwise,
- answer N.
-
-config BLZ2060_SCSI
- tristate "Blizzard 2060 SCSI support"
- depends on ZORRO && SCSI
- help
- If you have an Amiga with a Phase5 Blizzard 2060 accelerator board
- and want to use the onboard SCSI controller, say Y. Otherwise,
- answer N.
-
-config BLZ1230_SCSI
- tristate "Blizzard 1230IV/1260 SCSI support"
- depends on ZORRO && SCSI
- help
- If you have an Amiga 1200 with a Phase5 Blizzard 1230IV or Blizzard
- 1260 accelerator, and the optional SCSI module, say Y. Otherwise,
- say N.
-
-config FASTLANE_SCSI
- tristate "Fastlane SCSI support"
- depends on ZORRO && SCSI
- help
- If you have the Phase5 Fastlane Z3 SCSI controller, or plan to use
- one in the near future, say Y to this question. Otherwise, say N.
-
config SCSI_A4000T
tristate "A4000T NCR53c710 SCSI support (EXPERIMENTAL)"
depends on AMIGA && SCSI && EXPERIMENTAL
accelerator card for the Amiga 1200,
- the SCSI controller on the GVP Turbo 040/060 accelerator.
-config OKTAGON_SCSI
- tristate "BSC Oktagon SCSI support (EXPERIMENTAL)"
- depends on ZORRO && SCSI && EXPERIMENTAL
- help
- If you have the BSC Oktagon SCSI disk controller for the Amiga, say
- Y to this question. If you're in doubt about whether you have one,
- see the picture at
- <http://amiga.resource.cx/exp/search.pl?product=oktagon>.
-
config ATARI_SCSI
tristate "Atari native SCSI support"
depends on ATARI && SCSI
select SCSI_SPI_ATTRS
+ select NVRAM
---help---
If you have an Atari with built-in NCR5380 SCSI controller (TT,
Falcon, ...) say Y to get it supported. Of course also, if you have
boot process fractionally longer but may assist recovery from errors
that leave the devices with SCSI operations partway completed.
-config TT_DMA_EMUL
- bool "Hades SCSI DMA emulator"
- depends on ATARI_SCSI && HADES
- help
- This option enables code which emulates the TT SCSI DMA chip on the
- Hades. This increases the SCSI transfer rates at least ten times
- compared to PIO transfers.
-
config MAC_SCSI
bool "Macintosh NCR5380 SCSI"
depends on MAC && SCSI=y
config SCSI_MAC_ESP
tristate "Macintosh NCR53c9[46] SCSI"
depends on MAC && SCSI
+ select SCSI_SPI_ATTRS
help
This is the NCR 53c9x SCSI controller found on most of the 68040
- based Macintoshes. If you have one of these say Y and read the
- SCSI-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
+ based Macintoshes.
- To compile this driver as a module, choose M here: the
- module will be called mac_esp.
+ To compile this driver as a module, choose M here: the module
+ will be called mac_esp.
config MVME147_SCSI
bool "WD33C93 SCSI driver for MVME147"
config SUN3X_ESP
bool "Sun3x ESP SCSI"
depends on SUN3X && SCSI=y
+ select SCSI_SPI_ATTRS
help
The ESP was an on-board SCSI controller used on Sun 3/80
machines. Say Y here to compile in support for it.
select SCSI_SPI_ATTRS
help
This is the driver for the Sun ESP SCSI host adapter. The ESP
- chipset is present in most SPARC SBUS-based computers.
+ chipset is present in most SPARC SBUS-based computers and
+ supports the Emulex family of ESP SCSI chips (esp100, esp100A,
+ esp236, fas101, fas236) as well as the Qlogic fas366 SCSI chip.
To compile this driver as a module, choose M here: the
- module will be called esp.
+ module will be called sun_esp.
config ZFCP
tristate "FCP host bus adapter driver for IBM eServer zSeries"
source "drivers/scsi/pcmcia/Kconfig"
+source "drivers/scsi/device_handler/Kconfig"
+
+source "drivers/scsi/osd/Kconfig"
+
endmenu
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff