menu "SCSI device support"
+config SCSI_MOD
+ tristate
+ default y if SCSI=n || SCSI=y
+ default m if SCSI=m
+
config RAID_ATTRS
tristate "RAID Transport Class"
default n
depends on BLOCK
+ depends on SCSI_MOD
---help---
Provides RAID
You also need to say Y here if you have a device which speaks
the SCSI protocol. Examples of this include the parallel port
version of the IOMEGA ZIP drive, USB storage devices, Fibre
- Channel, FireWire storage and the IDE-SCSI emulation driver.
+ Channel, and FireWire storage.
To compile this driver as a module, choose M here and read
<file:Documentation/scsi/scsi.txt>.
config BLK_DEV_SD
tristate "SCSI disk support"
depends on SCSI
+ select CRC_T10DIF if BLK_DEV_INTEGRITY
---help---
If you want to use SCSI hard disks, Fibre Channel disks,
Serial ATA (SATA) or Parallel ATA (PATA) hard disks,
---help---
The OnStream SC-x0 SCSI tape drives cannot be driven by the
standard st driver, but instead need this special osst driver and
- use the /dev/osstX char device nodes (major 206). Via usb-storage
- and ide-scsi, you may be able to drive the USB-x0 and DI-x0 drives
- as well. Note that there is also a second generation of OnStream
+ use the /dev/osstX char device nodes (major 206). Via usb-storage,
+ you may be able to drive the USB-x0 and DI-x0 drives as well.
+ Note that there is also a second generation of OnStream
tape drives (ADR-x0) that supports the standard SCSI-2 commands for
tapes (QIC-157) and can be driven by the standard driver st.
For more information, you may have a look at the SCSI-HOWTO
tristate "SCSI CDROM support"
depends on SCSI
---help---
- If you want to use a SCSI or FireWire CD-ROM under Linux,
- say Y and read the SCSI-HOWTO and the CDROM-HOWTO at
- <http://www.tldp.org/docs.html#howto>. Also make sure to say
- Y or M to "ISO 9660 CD-ROM file system support" later.
+ If you want to use a CD or DVD drive attached to your computer
+ by SCSI, FireWire, USB or ATAPI, say Y and read the SCSI-HOWTO
+ and the CDROM-HOWTO at <http://www.tldp.org/docs.html#howto>.
+
+ Make sure to say Y or M to "ISO 9660 CD-ROM file system support".
To compile this driver as a module, choose M here and read
<file:Documentation/scsi/scsi.txt>.
it has an enclosure device. Selecting this option will just allow
certain enclosure conditions to be reported and is not required.
-comment "Some SCSI devices (e.g. CD jukebox) support multiple LUNs"
- depends on SCSI
-
config SCSI_MULTI_LUN
bool "Probe all LUNs on each SCSI device"
depends on SCSI
help
- If you have a SCSI device that supports more than one LUN (Logical
- Unit Number), e.g. a CD jukebox, and only one LUN is detected, you
- can say Y here to force the SCSI driver to probe for multiple LUNs.
- A SCSI device with multiple LUNs acts logically like multiple SCSI
- devices. The vast majority of SCSI devices have only one LUN, and
- so most people can say N here. The max_luns boot/module parameter
- allows to override this setting.
+ Some devices support more than one LUN (Logical Unit Number) in order
+ to allow access to several media, e.g. CD jukebox, USB card reader,
+ mobile phone in mass storage mode. This option forces the kernel to
+ probe for all LUNs by default. This setting can be overriden by
+ max_luns boot/module parameter. Note that this option does not affect
+ devices conforming to SCSI-3 or higher as they can explicitely report
+ their number of LUNs. It is safe to say Y here unless you have one of
+ those rare devices which reacts in an unexpected way when probed for
+ multiple LUNs.
config SCSI_CONSTANTS
bool "Verbose SCSI error reporting (kernel size +=12K)"
can enable logging by saying Y to "/proc file system support" and
"Sysctl support" below and executing the command
- echo "scsi log token [level]" > /proc/scsi/scsi
+ echo <bitmask> > /proc/sys/dev/scsi/logging_level
- at boot time after the /proc file system has been mounted.
+ where <bitmask> is a four byte value representing the logging type
+ and logging level for each type of logging selected.
- There are a number of things that can be used for 'token' (you can
- find them in the source: <file:drivers/scsi/scsi.c>), and this
- allows you to select the types of information you want, and the
- level allows you to select the level of verbosity.
+ There are a number of logging types and you can find them in the
+ source at <file:drivers/scsi/scsi_logging.h>. The logging levels
+ are also described in that file and they determine the verbosity of
+ the logging for each logging type.
If you say N here, it may be harder to track down some types of SCSI
problems. If you say Y here your kernel will be somewhat larger, but
or async on the kernel's command line.
config SCSI_WAIT_SCAN
- tristate
+ tristate # No prompt here, this is an invisible symbol.
default m
depends on SCSI
depends on MODULES
+# scsi_wait_scan is a loadable module which waits until all the async scans are
+# complete. The idea is to use it in initrd/ initramfs scripts. You modprobe
+# it after all the modprobes of the root SCSI drivers and it will wait until
+# they have all finished scanning their buses before allowing the boot to
+# proceed. (This method is not applicable if targets boot independently in
+# parallel with the initiator, or with transports with non-deterministic target
+# discovery schemes, or if a transport driver does not support scsi_wait_scan.)
+#
+# This symbol is not exposed as a prompt because little is to be gained by
+# disabling it, whereas people who accidentally switch it off may wonder why
+# their mkinitrd gets into trouble.
menu "SCSI Transports"
depends on SCSI
http://open-iscsi.org
+source "drivers/scsi/cxgb3i/Kconfig"
+source "drivers/scsi/bnx2i/Kconfig"
+source "drivers/scsi/be2iscsi/Kconfig"
+
config SGIWD93_SCSI
tristate "SGI WD93C93 SCSI Driver"
depends on SGI_HAS_WD93 && SCSI
Please read the comments at the top of
<file:drivers/scsi/3w-xxxx.c>.
+config SCSI_HPSA
+ tristate "HP Smart Array SCSI driver"
+ depends on PCI && SCSI
+ help
+ This driver supports HP Smart Array Controllers (circa 2009).
+ It is a SCSI alternative to the cciss driver, which is a block
+ driver. Anyone wishing to use HP Smart Array controllers who
+ would prefer the devices be presented to linux as SCSI devices,
+ rather than as generic block devices should say Y here.
+
config SCSI_3W_9XXX
tristate "3ware 9xxx SATA-RAID support"
depends on PCI && SCSI
Please read the comments at the top of
<file:drivers/scsi/3w-9xxx.c>.
+config SCSI_3W_SAS
+ tristate "3ware 97xx SAS/SATA-RAID support"
+ depends on PCI && SCSI
+ help
+ This driver supports the LSI 3ware 9750 6Gb/s SAS/SATA-RAID cards.
+
+ <http://www.lsi.com>
+
+ Please read the comments at the top of
+ <file:drivers/scsi/3w-sas.c>.
+
config SCSI_7000FASST
tristate "7000FASST SCSI support"
depends on ISA && SCSI && ISA_DMA_API
source "drivers/scsi/aic7xxx/Kconfig.aic79xx"
source "drivers/scsi/aic94xx/Kconfig"
+source "drivers/scsi/mvsas/Kconfig"
config SCSI_DPT_I2O
tristate "Adaptec I2O RAID support "
To enable this function, choose Y here.
source "drivers/scsi/megaraid/Kconfig.megaraid"
+source "drivers/scsi/mpt2sas/Kconfig"
config SCSI_HPTIOP
tristate "HighPoint RocketRAID 3xxx/4xxx Controller support"
substantial, so users of MultiMaster Host Adapters may not
wish to include it.
+config VMWARE_PVSCSI
+ tristate "VMware PVSCSI driver support"
+ depends on PCI && SCSI && X86
+ help
+ This driver supports VMware's para virtualized SCSI HBA.
+ To compile this driver as a module, choose M here: the
+ module will be called vmw_pvscsi.
+
+config LIBFC
+ tristate "LibFC module"
+ select SCSI_FC_ATTRS
+ select CRC32
+ ---help---
+ Fibre Channel library module
+
+config LIBFCOE
+ tristate "LibFCoE module"
+ select LIBFC
+ ---help---
+ Library for Fibre Channel over Ethernet module
+
+config FCOE
+ tristate "FCoE module"
+ depends on PCI
+ select LIBFCOE
+ ---help---
+ Fibre Channel over Ethernet module
+
+config FCOE_FNIC
+ tristate "Cisco FNIC Driver"
+ depends on PCI && X86
+ select LIBFCOE
+ help
+ This is support for the Cisco PCI-Express FCoE HBA.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/scsi/scsi.txt>.
+ The module will be called fnic.
+
config SCSI_DMX3191D
tristate "DMX3191D SCSI support"
depends on PCI && SCSI
tristate "IBM Virtual SCSI support"
depends on PPC_PSERIES || PPC_ISERIES
select SCSI_SRP_ATTRS
+ select VIOPATH if PPC_ISERIES
help
This is the IBM POWER Virtual SCSI Client
To compile this driver as a module, choose M here: the
module will be called ibmvstgt.
+config SCSI_IBMVFC
+ tristate "IBM Virtual FC support"
+ depends on PPC_PSERIES && SCSI
+ select SCSI_FC_ATTRS
+ help
+ This is the IBM POWER Virtual FC Client
+
+ To compile this driver as a module, choose M here: the
+ module will be called ibmvfc.
+
+config SCSI_IBMVFC_TRACE
+ bool "enable driver internal trace"
+ depends on SCSI_IBMVFC
+ default y
+ help
+ If you say Y here, the driver will trace all commands issued
+ to the adapter. Performance impact is minimal. Trace can be
+ dumped using /sys/class/scsi_host/hostXX/trace.
+
config SCSI_INITIO
tristate "Initio 9100U(W) support"
depends on PCI && SCSI
Generally, saying N is fine.
-config SCSI_MVSAS
- tristate "Marvell 88SE6440 SAS/SATA support"
- depends on PCI && SCSI
- select SCSI_SAS_LIBSAS
- help
- This driver supports Marvell SAS/SATA PCI devices.
-
- To compiler this driver as a module, choose M here: the module
- will be called mvsas.
-
config SCSI_NCR53C406A
tristate "NCR53c406a SCSI support"
depends on ISA && SCSI
To compile this driver as a module, choose M here: the
module will be called qlogicfas.
-config SCSI_QLOGIC_FC_FIRMWARE
- bool "Include loadable firmware in driver"
- depends on SCSI_QLOGIC_FC
- help
- Say Y to include ISP2X00 Fabric Initiator/Target Firmware, with
- expanded LUN addressing and FcTape (FCP-2) support, in the
- qlogicfc driver. This is required on some platforms.
-
config SCSI_QLOGIC_1280
tristate "Qlogic QLA 1240/1x80/1x160 SCSI support"
depends on PCI && SCSI
This lpfc driver supports the Emulex LightPulse
Family of Fibre Channel PCI host adapters.
+config SCSI_LPFC_DEBUG_FS
+ bool "Emulex LightPulse Fibre Channel debugfs Support"
+ depends on SCSI_LPFC && DEBUG_FS
+ help
+ This makes debugging information from the lpfc driver
+ available via the debugfs filesystem.
+
config SCSI_SIM710
tristate "Simple 53c710 SCSI support (Compaq, NCR machines)"
depends on (EISA || MCA) && SCSI
select SCSI_SPI_ATTRS
---help---
- This driver for NCR53c710 based SCSI host adapters.
+ This driver is for NCR53c710 based SCSI host adapters.
It currently supports Compaq EISA cards and NCR MCA cards
config SCSI_DEBUG
tristate "SCSI debugging host simulator"
depends on SCSI
+ select CRC_T10DIF
help
This is a host adapter simulator that can simulate multiple hosts
each with multiple dummy SCSI devices (disks). It defaults to one
tristate "Atari native SCSI support"
depends on ATARI && SCSI
select SCSI_SPI_ATTRS
+ select NVRAM
---help---
If you have an Atari with built-in NCR5380 SCSI controller (TT,
Falcon, ...) say Y to get it supported. Of course also, if you have
boot process fractionally longer but may assist recovery from errors
that leave the devices with SCSI operations partway completed.
-config TT_DMA_EMUL
- bool "Hades SCSI DMA emulator"
- depends on ATARI_SCSI && HADES
- help
- This option enables code which emulates the TT SCSI DMA chip on the
- Hades. This increases the SCSI transfer rates at least ten times
- compared to PIO transfers.
-
config MAC_SCSI
bool "Macintosh NCR5380 SCSI"
depends on MAC && SCSI=y
select SCSI_SPI_ATTRS
help
This is the driver for the Sun ESP SCSI host adapter. The ESP
- chipset is present in most SPARC SBUS-based computers.
+ chipset is present in most SPARC SBUS-based computers and
+ supports the Emulex family of ESP SCSI chips (esp100, esp100A,
+ esp236, fas101, fas236) as well as the Qlogic fas366 SCSI chip.
To compile this driver as a module, choose M here: the
- module will be called esp.
+ module will be called sun_esp.
config ZFCP
tristate "FCP host bus adapter driver for IBM eServer zSeries"
called zfcp. If you want to compile it as a module, say M here
and read <file:Documentation/kbuild/modules.txt>.
+config SCSI_PMCRAID
+ tristate "PMC SIERRA Linux MaxRAID adapter support"
+ depends on PCI && SCSI
+ ---help---
+ This driver supports the PMC SIERRA MaxRAID adapters.
+
+config SCSI_PM8001
+ tristate "PMC-Sierra SPC 8001 SAS/SATA Based Host Adapter driver"
+ depends on PCI && SCSI
+ select SCSI_SAS_LIBSAS
+ help
+ This driver supports PMC-Sierra PCIE SAS/SATA 8x6G SPC 8001 chip
+ based host adapters.
+
config SCSI_SRP
tristate "SCSI RDMA Protocol helper library"
depends on SCSI && PCI
To compile this driver as a module, choose M here: the
module will be called libsrp.
+config SCSI_BFA_FC
+ tristate "Brocade BFA Fibre Channel Support"
+ depends on PCI && SCSI
+ select SCSI_FC_ATTRS
+ help
+ This bfa driver supports all Brocade PCIe FC/FCOE host adapters.
+
+ To compile this driver as a module, choose M here. The module will
+ be called bfa.
+
endif # SCSI_LOWLEVEL
source "drivers/scsi/pcmcia/Kconfig"
+source "drivers/scsi/device_handler/Kconfig"
+
+source "drivers/scsi/osd/Kconfig"
+
endmenu