tristate "SCSI CDROM support"
depends on SCSI
---help---
- If you want to use a SCSI or FireWire CD-ROM under Linux,
- say Y and read the SCSI-HOWTO and the CDROM-HOWTO at
- <http://www.tldp.org/docs.html#howto>. Also make sure to say
- Y or M to "ISO 9660 CD-ROM file system support" later.
+ If you want to use a CD or DVD drive attached to your computer
+ by SCSI, FireWire, USB or ATAPI, say Y and read the SCSI-HOWTO
+ and the CDROM-HOWTO at <http://www.tldp.org/docs.html#howto>.
+
+ Make sure to say Y or M to "ISO 9660 CD-ROM file system support".
To compile this driver as a module, choose M here and read
<file:Documentation/scsi/scsi.txt>.
it has an enclosure device. Selecting this option will just allow
certain enclosure conditions to be reported and is not required.
-comment "Some SCSI devices (e.g. CD jukebox) support multiple LUNs"
- depends on SCSI
-
config SCSI_MULTI_LUN
bool "Probe all LUNs on each SCSI device"
depends on SCSI
help
- If you have a SCSI device that supports more than one LUN (Logical
- Unit Number), e.g. a CD jukebox, and only one LUN is detected, you
- can say Y here to force the SCSI driver to probe for multiple LUNs.
- A SCSI device with multiple LUNs acts logically like multiple SCSI
- devices. The vast majority of SCSI devices have only one LUN, and
- so most people can say N here. The max_luns boot/module parameter
- allows to override this setting.
+ Some devices support more than one LUN (Logical Unit Number) in order
+ to allow access to several media, e.g. CD jukebox, USB card reader,
+ mobile phone in mass storage mode. This option forces the kernel to
+ probe for all LUNs by default. This setting can be overriden by
+ max_luns boot/module parameter. Note that this option does not affect
+ devices conforming to SCSI-3 or higher as they can explicitely report
+ their number of LUNs. It is safe to say Y here unless you have one of
+ those rare devices which reacts in an unexpected way when probed for
+ multiple LUNs.
config SCSI_CONSTANTS
bool "Verbose SCSI error reporting (kernel size +=12K)"
http://open-iscsi.org
source "drivers/scsi/cxgb3i/Kconfig"
+source "drivers/scsi/bnx2i/Kconfig"
config SGIWD93_SCSI
tristate "SGI WD93C93 SCSI Driver"
source "drivers/scsi/aic7xxx/Kconfig.aic79xx"
source "drivers/scsi/aic94xx/Kconfig"
+source "drivers/scsi/mvsas/Kconfig"
config SCSI_DPT_I2O
tristate "Adaptec I2O RAID support "
To enable this function, choose Y here.
source "drivers/scsi/megaraid/Kconfig.megaraid"
+source "drivers/scsi/mpt2sas/Kconfig"
config SCSI_HPTIOP
tristate "HighPoint RocketRAID 3xxx/4xxx Controller support"
---help---
Fibre Channel library module
+config LIBFCOE
+ tristate "LibFCoE module"
+ select LIBFC
+ ---help---
+ Library for Fibre Channel over Ethernet module
+
config FCOE
tristate "FCoE module"
depends on PCI
- select LIBFC
+ select LIBFCOE
---help---
Fibre Channel over Ethernet module
+config FCOE_FNIC
+ tristate "Cisco FNIC Driver"
+ depends on PCI && X86
+ select LIBFC
+ help
+ This is support for the Cisco PCI-Express FCoE HBA.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/scsi/scsi.txt>.
+ The module will be called fnic.
+
config SCSI_DMX3191D
tristate "DMX3191D SCSI support"
depends on PCI && SCSI
Generally, saying N is fine.
-config SCSI_MVSAS
- tristate "Marvell 88SE6440 SAS/SATA support"
- depends on PCI && SCSI
- select SCSI_SAS_LIBSAS
- help
- This driver supports Marvell SAS/SATA PCI devices.
-
- To compiler this driver as a module, choose M here: the module
- will be called mvsas.
-
config SCSI_NCR53C406A
tristate "NCR53c406a SCSI support"
depends on ISA && SCSI
bool "Emulex LightPulse Fibre Channel debugfs Support"
depends on SCSI_LPFC && DEBUG_FS
help
- This makes debugging infomation from the lpfc driver
+ This makes debugging information from the lpfc driver
available via the debugfs filesystem.
config SCSI_SIM710
depends on (EISA || MCA) && SCSI
select SCSI_SPI_ATTRS
---help---
- This driver for NCR53c710 based SCSI host adapters.
+ This driver is for NCR53c710 based SCSI host adapters.
It currently supports Compaq EISA cards and NCR MCA cards
source "drivers/scsi/device_handler/Kconfig"
+source "drivers/scsi/osd/Kconfig"
+
endmenu