tristate "SCSI CDROM support"
depends on SCSI
---help---
- If you want to use a SCSI or FireWire CD-ROM under Linux,
- say Y and read the SCSI-HOWTO and the CDROM-HOWTO at
- <http://www.tldp.org/docs.html#howto>. Also make sure to say
- Y or M to "ISO 9660 CD-ROM file system support" later.
+ If you want to use a CD or DVD drive attached to your computer
+ by SCSI, FireWire, USB or ATAPI, say Y and read the SCSI-HOWTO
+ and the CDROM-HOWTO at <http://www.tldp.org/docs.html#howto>.
+
+ Make sure to say Y or M to "ISO 9660 CD-ROM file system support".
To compile this driver as a module, choose M here and read
<file:Documentation/scsi/scsi.txt>.
it has an enclosure device. Selecting this option will just allow
certain enclosure conditions to be reported and is not required.
-comment "Some SCSI devices (e.g. CD jukebox) support multiple LUNs"
- depends on SCSI
-
config SCSI_MULTI_LUN
bool "Probe all LUNs on each SCSI device"
depends on SCSI
help
- If you have a SCSI device that supports more than one LUN (Logical
- Unit Number), e.g. a CD jukebox, and only one LUN is detected, you
- can say Y here to force the SCSI driver to probe for multiple LUNs.
- A SCSI device with multiple LUNs acts logically like multiple SCSI
- devices. The vast majority of SCSI devices have only one LUN, and
- so most people can say N here. The max_luns boot/module parameter
- allows to override this setting.
+ Some devices support more than one LUN (Logical Unit Number) in order
+ to allow access to several media, e.g. CD jukebox, USB card reader,
+ mobile phone in mass storage mode. This option forces the kernel to
+ probe for all LUNs by default. This setting can be overriden by
+ max_luns boot/module parameter. Note that this option does not affect
+ devices conforming to SCSI-3 or higher as they can explicitely report
+ their number of LUNs. It is safe to say Y here unless you have one of
+ those rare devices which reacts in an unexpected way when probed for
+ multiple LUNs.
config SCSI_CONSTANTS
bool "Verbose SCSI error reporting (kernel size +=12K)"
or async on the kernel's command line.
config SCSI_WAIT_SCAN
- tristate
+ tristate # No prompt here, this is an invisible symbol.
default m
depends on SCSI
depends on MODULES
+# scsi_wait_scan is a loadable module which waits until all the async scans are
+# complete. The idea is to use it in initrd/ initramfs scripts. You modprobe
+# it after all the modprobes of the root SCSI drivers and it will wait until
+# they have all finished scanning their buses before allowing the boot to
+# proceed. (This method is not applicable if targets boot independently in
+# parallel with the initiator, or with transports with non-deterministic target
+# discovery schemes, or if a transport driver does not support scsi_wait_scan.)
+#
+# This symbol is not exposed as a prompt because little is to be gained by
+# disabling it, whereas people who accidentally switch it off may wonder why
+# their mkinitrd gets into trouble.
menu "SCSI Transports"
depends on SCSI
http://open-iscsi.org
source "drivers/scsi/cxgb3i/Kconfig"
+source "drivers/scsi/bnx2i/Kconfig"
+source "drivers/scsi/be2iscsi/Kconfig"
config SGIWD93_SCSI
tristate "SGI WD93C93 SCSI Driver"
Please read the comments at the top of
<file:drivers/scsi/3w-9xxx.c>.
+config SCSI_3W_SAS
+ tristate "3ware 97xx SAS/SATA-RAID support"
+ depends on PCI && SCSI
+ help
+ This driver supports the LSI 3ware 9750 6Gb/s SAS/SATA-RAID cards.
+
+ <http://www.lsi.com>
+
+ Please read the comments at the top of
+ <file:drivers/scsi/3w-sas.c>.
+
config SCSI_7000FASST
tristate "7000FASST SCSI support"
depends on ISA && SCSI && ISA_DMA_API
source "drivers/scsi/aic7xxx/Kconfig.aic79xx"
source "drivers/scsi/aic94xx/Kconfig"
+source "drivers/scsi/mvsas/Kconfig"
config SCSI_DPT_I2O
tristate "Adaptec I2O RAID support "
substantial, so users of MultiMaster Host Adapters may not
wish to include it.
+config VMWARE_PVSCSI
+ tristate "VMware PVSCSI driver support"
+ depends on PCI && SCSI && X86
+ help
+ This driver supports VMware's para virtualized SCSI HBA.
+ To compile this driver as a module, choose M here: the
+ module will be called vmw_pvscsi.
+
config LIBFC
tristate "LibFC module"
select SCSI_FC_ATTRS
---help---
Fibre Channel library module
+config LIBFCOE
+ tristate "LibFCoE module"
+ select LIBFC
+ ---help---
+ Library for Fibre Channel over Ethernet module
+
config FCOE
tristate "FCoE module"
depends on PCI
- select LIBFC
+ select LIBFCOE
---help---
Fibre Channel over Ethernet module
+config FCOE_FNIC
+ tristate "Cisco FNIC Driver"
+ depends on PCI && X86
+ select LIBFCOE
+ help
+ This is support for the Cisco PCI-Express FCoE HBA.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/scsi/scsi.txt>.
+ The module will be called fnic.
+
config SCSI_DMX3191D
tristate "DMX3191D SCSI support"
depends on PCI && SCSI
Generally, saying N is fine.
-config SCSI_MVSAS
- tristate "Marvell 88SE6440 SAS/SATA support"
- depends on PCI && SCSI
- select SCSI_SAS_LIBSAS
- help
- This driver supports Marvell SAS/SATA PCI devices.
-
- To compiler this driver as a module, choose M here: the module
- will be called mvsas.
-
config SCSI_NCR53C406A
tristate "NCR53c406a SCSI support"
depends on ISA && SCSI
called zfcp. If you want to compile it as a module, say M here
and read <file:Documentation/kbuild/modules.txt>.
+config SCSI_PMCRAID
+ tristate "PMC SIERRA Linux MaxRAID adapter support"
+ depends on PCI && SCSI
+ ---help---
+ This driver supports the PMC SIERRA MaxRAID adapters.
+
+config SCSI_PM8001
+ tristate "PMC-Sierra SPC 8001 SAS/SATA Based Host Adapter driver"
+ depends on PCI && SCSI
+ select SCSI_SAS_LIBSAS
+ help
+ This driver supports PMC-Sierra PCIE SAS/SATA 8x6G SPC 8001 chip
+ based host adapters.
+
config SCSI_SRP
tristate "SCSI RDMA Protocol helper library"
depends on SCSI && PCI
To compile this driver as a module, choose M here: the
module will be called libsrp.
+config SCSI_BFA_FC
+ tristate "Brocade BFA Fibre Channel Support"
+ depends on PCI && SCSI
+ select SCSI_FC_ATTRS
+ help
+ This bfa driver supports all Brocade PCIe FC/FCOE host adapters.
+
+ To compile this driver as a module, choose M here. The module will
+ be called bfa.
+
endif # SCSI_LOWLEVEL
source "drivers/scsi/pcmcia/Kconfig"
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff