gayle: reserve memory resources at once

[safe/jmp/linux-2.6] / drivers / scsi / Kconfig

diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index a5f0aaa..26be540 100644 (file)
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -325,7 +325,7 @@ menuconfig SCSI_LOWLEVEL
        depends on SCSI!=n
        default y
 
-if SCSI_LOWLEVEL
+if SCSI_LOWLEVEL && SCSI
 
 config ISCSI_TCP
        tristate "iSCSI Initiator over TCP/IP"
@@ -504,10 +504,9 @@ config SCSI_AIC7XXX_OLD
 source "drivers/scsi/aic7xxx/Kconfig.aic79xx"
 source "drivers/scsi/aic94xx/Kconfig"
 
-# All the I2O code and drivers do not seem to be 64bit safe.
 config SCSI_DPT_I2O
        tristate "Adaptec I2O RAID support "
-       depends on !64BIT && SCSI && PCI && VIRT_TO_BUS
+       depends on SCSI && PCI && VIRT_TO_BUS
        help
          This driver supports all of Adaptec's I2O based RAID controllers as 
          well as the DPT SmartRaid V cards.  This is an Adaptec maintained
@@ -588,18 +587,20 @@ config SCSI_BUSLOGIC
          <http://www.tldp.org/docs.html#howto>, and the files
          <file:Documentation/scsi/BusLogic.txt> and
          <file:Documentation/scsi/FlashPoint.txt> for more information.
+         Note that support for FlashPoint is only available for 32-bit
+         x86 configurations.
 
          To compile this driver as a module, choose M here: the
          module will be called BusLogic.
 
-config SCSI_OMIT_FLASHPOINT
-       bool "Omit FlashPoint support"
-       depends on SCSI_BUSLOGIC
+config SCSI_FLASHPOINT
+       bool "FlashPoint support"
+       depends on SCSI_BUSLOGIC && PCI && X86_32
        help
-         This option allows you to omit the FlashPoint support from the
+         This option allows you to add FlashPoint support to the
          BusLogic SCSI driver. The FlashPoint SCCB Manager code is
-         substantial, so users of MultiMaster Host Adapters may wish to omit
-         it.
+         substantial, so users of MultiMaster Host Adapters may not
+         wish to include it.
 
 config SCSI_DMX3191D
        tristate "DMX3191D SCSI support"
@@ -722,7 +723,7 @@ config SCSI_FD_MCS
 
 config SCSI_GDTH
        tristate "Intel/ICP (former GDT SCSI Disk Array) RAID Controller support"
-       depends on (ISA || EISA || PCI) && SCSI && ISA_DMA_API && PCI_LEGACY
+       depends on (ISA || EISA || PCI) && SCSI && ISA_DMA_API
        ---help---
          Formerly called GDT SCSI Disk Array Controller Support.
 
@@ -887,6 +888,25 @@ config SCSI_IBMVSCSIS
          To compile this driver as a module, choose M here: the
          module will be called ibmvstgt.
 
+config SCSI_IBMVFC
+       tristate "IBM Virtual FC support"
+       depends on PPC_PSERIES && SCSI
+       select SCSI_FC_ATTRS
+       help
+         This is the IBM POWER Virtual FC Client
+
+         To compile this driver as a module, choose M here: the
+         module will be called ibmvfc.
+
+config SCSI_IBMVFC_TRACE
+       bool "enable driver internal trace"
+       depends on SCSI_IBMVFC
+       default y
+       help
+         If you say Y here, the driver will trace all commands issued
+         to the adapter. Performance impact is minimal. Trace can be
+         dumped using /sys/class/scsi_host/hostXX/trace.
+
 config SCSI_INITIO
        tristate "Initio 9100U(W) support"
        depends on PCI && SCSI
@@ -992,6 +1012,16 @@ config SCSI_IZIP_SLOW_CTR
 
          Generally, saying N is fine.
 
+config SCSI_MVSAS
+       tristate "Marvell 88SE6440 SAS/SATA support"
+       depends on PCI && SCSI
+       select SCSI_SAS_LIBSAS
+       help
+         This driver supports Marvell SAS/SATA PCI devices.
+
+         To compiler this driver as a module, choose M here: the module
+         will be called mvsas.
+
 config SCSI_NCR53C406A
        tristate "NCR53c406a SCSI support"
        depends on ISA && SCSI
@@ -1665,6 +1695,17 @@ config MAC_SCSI
          SCSI-HOWTO, available from
          <http://www.tldp.org/docs.html#howto>.
 
+config SCSI_MAC_ESP
+       tristate "Macintosh NCR53c9[46] SCSI"
+       depends on MAC && SCSI
+       select SCSI_SPI_ATTRS
+       help
+         This is the NCR 53c9x SCSI controller found on most of the 68040
+         based Macintoshes.
+
+         To compile this driver as a module, choose M here: the module
+         will be called mac_esp.
+
 config MVME147_SCSI
        bool "WD33C93 SCSI driver for MVME147"
        depends on MVME147 && SCSI=y
@@ -1716,10 +1757,12 @@ config SCSI_SUNESP
        select SCSI_SPI_ATTRS
        help
          This is the driver for the Sun ESP SCSI host adapter. The ESP
-         chipset is present in most SPARC SBUS-based computers.
+         chipset is present in most SPARC SBUS-based computers and
+         supports the Emulex family of ESP SCSI chips (esp100, esp100A,
+         esp236, fas101, fas236) as well as the Qlogic fas366 SCSI chip.
 
          To compile this driver as a module, choose M here: the
-         module will be called esp.
+         module will be called sun_esp.
 
 config ZFCP
        tristate "FCP host bus adapter driver for IBM eServer zSeries"
@@ -1749,4 +1792,6 @@ endif # SCSI_LOWLEVEL
 
 source "drivers/scsi/pcmcia/Kconfig"
 
+source "drivers/scsi/device_handler/Kconfig"
+
 endmenu