#include <asm/debug.h>
#include <asm/idals.h>
#include <asm/ebcdic.h>
+#include <asm/compat.h>
#include <asm/io.h>
-#include <asm/todclk.h>
#include <asm/uaccess.h>
#include <asm/cio.h>
#include <asm/ccwdev.h>
static struct ccw_driver dasd_eckd_driver; /* see below */
+#define INIT_CQR_OK 0
+#define INIT_CQR_UNFORMATTED 1
+#define INIT_CQR_ERROR 2
+
+
/* initial attempt at a probe function. this can be simplified once
* the other detection code is gone */
static int
int ret;
/* set ECKD specific ccw-device options */
- ret = ccw_device_set_options(cdev, CCWDEV_ALLOW_FORCE);
+ ret = ccw_device_set_options(cdev, CCWDEV_ALLOW_FORCE |
+ CCWDEV_DO_PATHGROUP | CCWDEV_DO_MULTIPATH);
if (ret) {
- DBF_EVENT(DBF_WARNING,
- "dasd_eckd_probe: could not set ccw-device options "
- "for %s\n", dev_name(&cdev->dev));
+ DBF_EVENT_DEVID(DBF_WARNING, cdev, "%s",
+ "dasd_eckd_probe: could not set "
+ "ccw-device options");
return ret;
}
ret = dasd_generic_probe(cdev, &dasd_eckd_discipline);
sizeof(uid->serial) - 1);
EBCASC(uid->serial, sizeof(uid->serial) - 1);
uid->ssid = private->gneq->subsystemID;
- uid->real_unit_addr = private->ned->unit_addr;;
+ uid->real_unit_addr = private->ned->unit_addr;
if (private->sneq) {
uid->type = private->sneq->sua_flags;
if (uid->type == UA_BASE_PAV_ALIAS)
cqr->block = NULL;
cqr->expires = 10*HZ;
cqr->lpm = lpm;
- clear_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags);
- cqr->retries = 2;
+ cqr->retries = 256;
cqr->buildclk = get_clock();
cqr->status = DASD_CQR_FILLED;
return cqr;
rc = dasd_eckd_read_conf_lpm(device, &conf_data,
&conf_len, lpm);
if (rc && rc != -EOPNOTSUPP) { /* -EOPNOTSUPP is ok */
- DBF_EVENT(DBF_WARNING,
+ DBF_EVENT_DEVID(DBF_WARNING, device->cdev,
"Read configuration data returned "
- "error %d for device: %s", rc,
- dev_name(&device->cdev->dev));
+ "error %d", rc);
return rc;
}
if (conf_data == NULL) {
- DBF_EVENT(DBF_WARNING, "No configuration "
- "data retrieved for device: %s",
- dev_name(&device->cdev->dev));
+ DBF_EVENT_DEVID(DBF_WARNING, device->cdev, "%s",
+ "No configuration data "
+ "retrieved");
continue; /* no error */
}
/* save first valid configuration data */
sizeof(struct dasd_rssd_features)),
device);
if (IS_ERR(cqr)) {
- DBF_EVENT(DBF_WARNING, "Could not allocate initialization "
- "request for device: %s",
- dev_name(&device->cdev->dev));
+ DBF_EVENT_DEVID(DBF_WARNING, device->cdev, "%s", "Could not "
+ "allocate initialization request");
return PTR_ERR(cqr);
}
cqr->startdev = device;
cqr->memdev = device;
cqr->block = NULL;
- clear_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags);
- cqr->retries = 5;
+ cqr->retries = 256;
cqr->expires = 10 * HZ;
/* Prepare for Read Subsystem Data */
}
psf_ssc_data = (struct dasd_psf_ssc_data *)cqr->data;
psf_ssc_data->order = PSF_ORDER_SSC;
- psf_ssc_data->suborder = 0x40;
+ psf_ssc_data->suborder = 0xc0;
if (enable_pav) {
- psf_ssc_data->suborder |= 0x88;
+ psf_ssc_data->suborder |= 0x08;
psf_ssc_data->reserved[0] = 0x88;
}
ccw = cqr->cpaddr;
cqr->startdev = device;
cqr->memdev = device;
cqr->block = NULL;
+ cqr->retries = 256;
cqr->expires = 10*HZ;
cqr->buildclk = get_clock();
cqr->status = DASD_CQR_FILLED;
/*
* Valide storage server of current device.
*/
-static int dasd_eckd_validate_server(struct dasd_device *device)
+static void dasd_eckd_validate_server(struct dasd_device *device)
{
int rc;
struct dasd_eckd_private *private;
else
enable_pav = 1;
rc = dasd_eckd_psf_ssc(device, enable_pav);
+
/* may be requested feature is not available on server,
* therefore just report error and go ahead */
private = (struct dasd_eckd_private *) device->private;
- DBF_EVENT(DBF_WARNING, "PSF-SSC on storage subsystem %s.%s.%04x "
- "returned rc=%d for device: %s",
- private->uid.vendor, private->uid.serial,
- private->uid.ssid, rc, dev_name(&device->cdev->dev));
- /* RE-Read Configuration Data */
- return dasd_eckd_read_conf(device);
+ DBF_EVENT_DEVID(DBF_WARNING, device->cdev, "PSF-SSC for SSID %04x "
+ "returned rc=%d", private->uid.ssid, rc);
}
/*
struct dasd_block *block;
int is_known, rc;
+ if (!ccw_device_is_pathgroup(device->cdev)) {
+ dev_warn(&device->cdev->dev,
+ "A channel path group could not be established\n");
+ return -EIO;
+ }
+ if (!ccw_device_is_multipath(device->cdev)) {
+ dev_info(&device->cdev->dev,
+ "The DASD is not operating in multipath mode\n");
+ }
private = (struct dasd_eckd_private *) device->private;
if (!private) {
private = kzalloc(sizeof(*private), GFP_KERNEL | GFP_DMA);
if (private->uid.type == UA_BASE_DEVICE) {
block = dasd_alloc_block();
if (IS_ERR(block)) {
- DBF_EVENT(DBF_WARNING, "could not allocate dasd "
- "block structure for device: %s",
- dev_name(&device->cdev->dev));
+ DBF_EVENT_DEVID(DBF_WARNING, device->cdev, "%s",
+ "could not allocate dasd "
+ "block structure");
rc = PTR_ERR(block);
goto out_err1;
}
rc = is_known;
goto out_err2;
}
+ /*
+ * dasd_eckd_vaildate_server is done on the first device that
+ * is found for an LCU. All later other devices have to wait
+ * for it, so they will read the correct feature codes.
+ */
if (!is_known) {
- /* new lcu found */
- rc = dasd_eckd_validate_server(device); /* will switch pav on */
- if (rc)
- goto out_err3;
- }
+ dasd_eckd_validate_server(device);
+ dasd_alias_lcu_setup_complete(device);
+ } else
+ dasd_alias_wait_for_lcu_setup(device);
+
+ /* device may report different configuration data after LCU setup */
+ rc = dasd_eckd_read_conf(device);
+ if (rc)
+ goto out_err3;
/* Read Feature Codes */
dasd_eckd_read_features(device);
rc = dasd_generic_read_dev_chars(device, DASD_ECKD_MAGIC,
&private->rdc_data, 64);
if (rc) {
- DBF_EVENT(DBF_WARNING,
- "Read device characteristics failed, rc=%d for "
- "device: %s", rc, dev_name(&device->cdev->dev));
+ DBF_EVENT_DEVID(DBF_WARNING, device->cdev,
+ "Read device characteristic failed, rc=%d", rc);
goto out_err3;
}
/* find the vaild cylinder size */
cqr->block = NULL;
cqr->startdev = device;
cqr->memdev = device;
- cqr->retries = 0;
+ cqr->retries = 255;
cqr->buildclk = get_clock();
cqr->status = DASD_CQR_FILLED;
return cqr;
}
+/* differentiate between 'no record found' and any other error */
+static int dasd_eckd_analysis_evaluation(struct dasd_ccw_req *init_cqr)
+{
+ char *sense;
+ if (init_cqr->status == DASD_CQR_DONE)
+ return INIT_CQR_OK;
+ else if (init_cqr->status == DASD_CQR_NEED_ERP ||
+ init_cqr->status == DASD_CQR_FAILED) {
+ sense = dasd_get_sense(&init_cqr->irb);
+ if (sense && (sense[1] & SNS1_NO_REC_FOUND))
+ return INIT_CQR_UNFORMATTED;
+ else
+ return INIT_CQR_ERROR;
+ } else
+ return INIT_CQR_ERROR;
+}
+
/*
* This is the callback function for the init_analysis cqr. It saves
* the status of the initial analysis ccw before it frees it and kicks
* dasd_eckd_do_analysis again (if the devices has not been marked
* for deletion in the meantime).
*/
-static void
-dasd_eckd_analysis_callback(struct dasd_ccw_req *init_cqr, void *data)
+static void dasd_eckd_analysis_callback(struct dasd_ccw_req *init_cqr,
+ void *data)
{
struct dasd_eckd_private *private;
struct dasd_device *device;
device = init_cqr->startdev;
private = (struct dasd_eckd_private *) device->private;
- private->init_cqr_status = init_cqr->status;
+ private->init_cqr_status = dasd_eckd_analysis_evaluation(init_cqr);
dasd_sfree_request(init_cqr, device);
dasd_kick_device(device);
}
-static int
-dasd_eckd_start_analysis(struct dasd_block *block)
+static int dasd_eckd_start_analysis(struct dasd_block *block)
{
struct dasd_eckd_private *private;
struct dasd_ccw_req *init_cqr;
init_cqr->callback = dasd_eckd_analysis_callback;
init_cqr->callback_data = NULL;
init_cqr->expires = 5*HZ;
+ /* first try without ERP, so we can later handle unformatted
+ * devices as special case
+ */
+ clear_bit(DASD_CQR_FLAGS_USE_ERP, &init_cqr->flags);
+ init_cqr->retries = 0;
dasd_add_request_head(init_cqr);
return -EAGAIN;
}
-static int
-dasd_eckd_end_analysis(struct dasd_block *block)
+static int dasd_eckd_end_analysis(struct dasd_block *block)
{
struct dasd_device *device;
struct dasd_eckd_private *private;
struct eckd_count *count_area;
unsigned int sb, blk_per_trk;
int status, i;
+ struct dasd_ccw_req *init_cqr;
device = block->base;
private = (struct dasd_eckd_private *) device->private;
status = private->init_cqr_status;
private->init_cqr_status = -1;
- if (status != DASD_CQR_DONE) {
- dev_warn(&device->cdev->dev,
- "The DASD is not formatted\n");
+ if (status == INIT_CQR_ERROR) {
+ /* try again, this time with full ERP */
+ init_cqr = dasd_eckd_analysis_ccw(device);
+ dasd_sleep_on(init_cqr);
+ status = dasd_eckd_analysis_evaluation(init_cqr);
+ dasd_sfree_request(init_cqr, device);
+ }
+
+ if (status == INIT_CQR_UNFORMATTED) {
+ dev_warn(&device->cdev->dev, "The DASD is not formatted\n");
return -EMEDIUMTYPE;
+ } else if (status == INIT_CQR_ERROR) {
+ dev_err(&device->cdev->dev,
+ "Detecting the DASD disk layout failed because "
+ "of an I/O error\n");
+ return -EIO;
}
private->uses_cdl = 1;
}
fcp->startdev = device;
fcp->memdev = device;
- clear_bit(DASD_CQR_FLAGS_USE_ERP, &fcp->flags);
- fcp->retries = 5; /* set retry counter to enable default ERP */
+ fcp->retries = 256;
fcp->buildclk = get_clock();
fcp->status = DASD_CQR_FILLED;
return fcp;
/* Calculate number of blocks/records per track. */
blksize = block->bp_block;
blk_per_trk = recs_per_track(&private->rdc_data, 0, blksize);
+ if (blk_per_trk == 0)
+ return ERR_PTR(-EINVAL);
/* Calculate record id of first and last block. */
first_rec = first_trk = blk_rq_pos(req) >> block->s2b_shift;
first_offs = sector_div(first_trk, blk_per_trk);
cqr->startdev = device;
cqr->memdev = device;
cqr->retries = 0;
+ clear_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags);
cqr->expires = 10 * HZ;
/* Prepare for Read Subsystem Data */
rc = -EFAULT;
if (copy_from_user(&usrparm, argp, sizeof(usrparm)))
goto out;
-#ifndef CONFIG_64BIT
- /* Make sure pointers are sane even on 31 bit. */
- if ((usrparm.psf_data >> 32) != 0 || (usrparm.rssd_result >> 32) != 0) {
+ if (is_compat_task() || sizeof(long) == 4) {
+ /* Make sure pointers are sane even on 31 bit. */
rc = -EINVAL;
- goto out;
+ if ((usrparm.psf_data >> 32) != 0)
+ goto out;
+ if ((usrparm.rssd_result >> 32) != 0)
+ goto out;
+ usrparm.psf_data &= 0x7fffffffULL;
+ usrparm.rssd_result &= 0x7fffffffULL;
}
-#endif
/* alloc I/O data area */
psf_data = kzalloc(usrparm.psf_data_len, GFP_KERNEL | GFP_DMA);
rssd_result = kzalloc(usrparm.rssd_result_len, GFP_KERNEL | GFP_DMA);
int dasd_eckd_restore_device(struct dasd_device *device)
{
struct dasd_eckd_private *private;
+ struct dasd_eckd_characteristics temp_rdc_data;
int is_known, rc;
struct dasd_uid temp_uid;
+ unsigned long flags;
private = (struct dasd_eckd_private *) device->private;
rc = dasd_eckd_generate_uid(device, &private->uid);
dasd_get_uid(device->cdev, &temp_uid);
if (memcmp(&private->uid, &temp_uid, sizeof(struct dasd_uid)) != 0)
- dev_err(&device->cdev->dev, "The UID of the DASD has changed\n");
+ dev_err(&device->cdev->dev, "The UID of the DASD has "
+ "changed\n");
if (rc)
goto out_err;
dasd_set_uid(device->cdev, &private->uid);
if (is_known < 0)
return is_known;
if (!is_known) {
- /* new lcu found */
- rc = dasd_eckd_validate_server(device); /* will switch pav on */
- if (rc)
- goto out_err;
- }
+ dasd_eckd_validate_server(device);
+ dasd_alias_lcu_setup_complete(device);
+ } else
+ dasd_alias_wait_for_lcu_setup(device);
+
+ /* RE-Read Configuration Data */
+ rc = dasd_eckd_read_conf(device);
+ if (rc)
+ goto out_err;
/* Read Feature Codes */
dasd_eckd_read_features(device);
/* Read Device Characteristics */
- memset(&private->rdc_data, 0, sizeof(private->rdc_data));
rc = dasd_generic_read_dev_chars(device, DASD_ECKD_MAGIC,
- &private->rdc_data, 64);
+ &temp_rdc_data, 64);
if (rc) {
- DBF_EVENT(DBF_WARNING,
- "Read device characteristics failed, rc=%d for "
- "device: %s", rc, dev_name(&device->cdev->dev));
+ DBF_EVENT_DEVID(DBF_WARNING, device->cdev,
+ "Read device characteristic failed, rc=%d", rc);
goto out_err;
}
+ spin_lock_irqsave(get_ccwdev_lock(device->cdev), flags);
+ memcpy(&private->rdc_data, &temp_rdc_data, sizeof(temp_rdc_data));
+ spin_unlock_irqrestore(get_ccwdev_lock(device->cdev), flags);
/* add device to alias management */
dasd_alias_add_device(device);
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff