will be called rtc-pcf8583.
config RTC_DRV_M41T80
- tristate "ST M41T65/M41T80/81/82/83/84/85/87"
+ tristate "ST M41T62/65/M41T80/81/82/83/84/85/87"
help
If you say Y here you will get support for the ST M41T60
and M41T80 RTC chips series. Currently, the following chips are
- supported: M41T65, M41T80, M41T81, M41T82, M41T83, M41ST84,
+ supported: M41T62, M41T65, M41T80, M41T81, M41T82, M41T83, M41ST84,
M41ST85, and M41ST87.
This driver can also be built as a module. If so, the module
If you say Y here you will get support for the
watchdog timer in the ST M41T60 and M41T80 RTC chips series.
+config RTC_DRV_BQ32K
+ tristate "TI BQ32000"
+ help
+ If you say Y here you will get support for the TI
+ BQ32000 I2C RTC chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-bq32k.
+
config RTC_DRV_DM355EVM
tristate "TI DaVinci DM355 EVM RTC"
depends on MFD_DM355EVM_MSP
the Menelaus driver; it's not separate module.
config RTC_DRV_TWL4030
- tristate "TI TWL4030/TWL5030/TPS659x0"
+ tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0"
depends on RTC_CLASS && TWL4030_CORE
help
If you say yes here you get support for the RTC on the
- TWL4030 family chips, used mostly with OMAP3 platforms.
+ TWL4030/TWL5030/TWL6030 family chips, used mostly with OMAP3 platforms.
This driver can also be built as a module. If so, the module
- will be called rtc-twl4030.
+ will be called rtc-twl.
config RTC_DRV_S35390A
tristate "Seiko Instruments S-35390A"
This driver can also be built as a module. If so the module
will be called rtc-rx8581.
+config RTC_DRV_RX8025
+ tristate "Epson RX-8025SA/NB"
+ help
+ If you say yes here you get support for the Epson
+ RX-8025SA/NB RTC chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-rx8025.
+
endif # I2C
comment "SPI RTC drivers"
This driver can also be built as a module. If so, the module
will be called rtc-ds3234.
+config RTC_DRV_PCF2123
+ tristate "NXP PCF2123"
+ help
+ If you say yes here you get support for the NXP PCF2123
+ RTC chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-pcf2123.
+
endif # SPI_MASTER
comment "Platform RTC drivers"
This driver can also be built as a module, if so, the module
will be called "rtc-m48t59".
+config RTC_DRV_MSM6242
+ tristate "Oki MSM6242"
+ help
+ If you say yes here you get support for the Oki MSM6242
+ timekeeping chip. It is used in some Amiga models (e.g. A2000).
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-msm6242.
+
+config RTC_MXC
+ tristate "Freescale MXC Real Time Clock"
+ depends on ARCH_MXC
+ depends on RTC_CLASS
+ help
+ If you say yes here you get support for the Freescale MXC
+ RTC module.
+
+ This driver can also be built as a module, if so, the module
+ will be called "rtc-mxc".
+
config RTC_DRV_BQ4802
tristate "TI BQ4802"
help
This driver can also be built as a module. If so, the module
will be called rtc-bq4802.
+config RTC_DRV_RP5C01
+ tristate "Ricoh RP5C01"
+ help
+ If you say yes here you get support for the Ricoh RP5C01
+ timekeeping chip. It is used in some Amiga models (e.g. A3000
+ and A4000).
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-rp5c01.
+
config RTC_DRV_V3020
tristate "EM Microelectronic V3020"
help
This driver can also be built as a module. If so, the module
will be called rtc-v3020.
+config RTC_DRV_WM831X
+ tristate "Wolfson Microelectronics WM831x RTC"
+ depends on MFD_WM831X
+ help
+ If you say yes here you will get support for the RTC subsystem
+ of the Wolfson Microelectronics WM831X series PMICs.
+
+ This driver can also be built as a module. If so, the module
+ will be called "rtc-wm831x".
+
config RTC_DRV_WM8350
tristate "Wolfson Microelectronics WM8350 RTC"
depends on MFD_WM8350
If you say yes here you get support for the RTC subsystem of the
NXP PCF50633 used in embedded systems.
+config RTC_DRV_AB3100
+ tristate "ST-Ericsson AB3100 RTC"
+ depends on AB3100_CORE
+ default y if AB3100_CORE
+ help
+ Select this to enable the ST-Ericsson AB3100 Mixed Signal IC RTC
+ support. This chip contains a battery- and capacitor-backed RTC.
+
+config RTC_DRV_NUC900
+ tristate "NUC910/NUC920 RTC driver"
+ depends on RTC_CLASS && ARCH_W90X900
+ help
+ If you say yes here you get support for the RTC subsystem of the
+ NUC910/NUC920 used in embedded systems.
+
comment "on-CPU RTC drivers"
config RTC_DRV_OMAP
tristate "TI OMAP1"
- depends on ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730
+ depends on ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_DAVINCI_DA8XX
help
- Say "yes" here to support the real time clock on TI OMAP1 chips.
- This driver can also be built as a module called rtc-omap.
+ Say "yes" here to support the real time clock on TI OMAP1 and
+ DA8xx/OMAP-L13x chips. This driver can also be built as a
+ module called rtc-omap.
config RTC_DRV_S3C
tristate "Samsung S3C series SoC RTC"
config RTC_DRV_SH
tristate "SuperH On-Chip RTC"
- depends on RTC_CLASS && SUPERH
+ depends on RTC_CLASS && SUPERH && HAVE_CLK
help
Say Y here to enable support for the on-chip RTC found in
most SuperH processors.
tristate "Generic RTC support"
# Please consider writing a new RTC driver instead of using the generic
# RTC abstraction
- depends on PARISC || M68K
+ depends on PARISC || M68K || PPC || SUPERH32
help
Say Y or M here to enable RTC support on systems using the generic
RTC abstraction. If you do not know what you are doing, you should
just say Y.
-config RTC_DRV_PPC
- tristate "PowerPC machine dependent RTC support"
- depends on PPC
- help
- The PowerPC kernel has machine-specific functions for accessing
- the RTC. This exposes that functionality through the generic RTC
- class.
-
config RTC_DRV_PXA
tristate "PXA27x/PXA3xx"
depends on ARCH_PXA
config RTC_DRV_MV
tristate "Marvell SoC RTC"
- depends on ARCH_KIRKWOOD
+ depends on ARCH_KIRKWOOD || ARCH_DOVE
help
If you say yes here you will get support for the in-chip RTC
that can be found in some of Marvell's SoC devices, such as
This driver can also be built as a module. If so, the module
will be called rtc-mv.
+config RTC_DRV_PS3
+ tristate "PS3 RTC"
+ depends on PPC_PS3
+ help
+ If you say yes here you will get support for the RTC on PS3.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-ps3.
+
+config RTC_DRV_COH901331
+ tristate "ST-Ericsson COH 901 331 RTC"
+ depends on ARCH_U300
+ help
+ If you say Y here you will get access to ST-Ericsson
+ COH 901 331 RTC clock found in some ST-Ericsson Mobile
+ Platforms.
+
+ This driver can also be built as a module. If so, the module
+ will be called "rtc-coh901331".
+
+
+config RTC_DRV_STMP
+ tristate "Freescale STMP3xxx RTC"
+ depends on ARCH_STMP3XXX
+ help
+ If you say yes here you will get support for the onboard
+ STMP3xxx RTC.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-stmp3xxx.
+
+config RTC_DRV_PCAP
+ tristate "PCAP RTC"
+ depends on EZX_PCAP
+ help
+ If you say Y here you will get support for the RTC found on
+ the PCAP2 ASIC used on some Motorola phones.
+
+config RTC_DRV_MC13783
+ depends on MFD_MC13783
+ tristate "Freescale MC13783 RTC"
+ help
+ This enables support for the Freescale MC13783 PMIC RTC
+
endif # RTC_CLASS