if SPI_MASTER
+config RTC_DRV_M41T94
+ tristate "ST M41T94"
+ help
+ If you say yes here you will get support for the
+ ST M41T94 SPI RTC chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-m41t94.
+
+config RTC_DRV_DS1305
+ tristate "Dallas/Maxim DS1305/DS1306"
+ help
+ Select this driver to get support for the Dallas/Maxim DS1305
+ and DS1306 real time clock chips. These support a trickle
+ charger, alarms, and NVRAM in addition to the clock.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-ds1305.
+
config RTC_DRV_MAX6902
tristate "Maxim MAX6902"
help
This driver can also be built as a module. If so, the module
will be called rtc-rs5c348.
+config RTC_DRV_DS3234
+ tristate "Maxim/Dallas DS3234"
+ help
+ If you say yes here you get support for the
+ Maxim/Dallas DS3234 SPI RTC chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-ds3234.
+
endif # SPI_MASTER
comment "Platform RTC drivers"
config RTC_DRV_CMOS
tristate "PC-style 'CMOS'"
- depends on X86 || ALPHA || ARM || M32R || ATARI || PPC || MIPS
+ depends on X86 || ALPHA || ARM || M32R || ATARI || PPC || MIPS || SPARC64
default y if X86
help
Say "yes" here to get direct support for the real time clock
help
If you say yes here you get support for the Dallas DS1216 RTC chips.
+config RTC_DRV_DS1286
+ tristate "Dallas DS1286"
+ help
+ If you say yes here you get support for the Dallas DS1286 RTC chips.
+
config RTC_DRV_DS1302
tristate "Dallas DS1302"
depends on SH_SECUREEDGE5410
This driver can also be built as a module. If so, the module
will be called rtc-m48t86.
+config RTC_DRV_M48T35
+ tristate "ST M48T35"
+ help
+ If you say Y here you will get support for the
+ ST M48T35 RTC chip.
+
+ This driver can also be built as a module, if so, the module
+ will be called "rtc-m48t35".
+
config RTC_DRV_M48T59
- tristate "ST M48T59"
+ tristate "ST M48T59/M48T08/M48T02"
help
If you say Y here you will get support for the
- ST M48T59 RTC chip.
+ ST M48T59 RTC chip and compatible ST M48T08 and M48T02.
+
+ These chips are usually found in Sun SPARC and UltraSPARC
+ workstations.
This driver can also be built as a module, if so, the module
will be called "rtc-m48t59".
+config RTC_DRV_BQ4802
+ tristate "TI BQ4802"
+ help
+ If you say Y here you will get support for the TI
+ BQ4802 RTC chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-bq4802.
+
config RTC_DRV_V3020
tristate "EM Microelectronic V3020"
help
To compile this driver as a module, choose M here: the
module will be called rtc-vr41xx.
+config RTC_DRV_PL030
+ tristate "ARM AMBA PL030 RTC"
+ depends on ARM_AMBA
+ help
+ If you say Y here you will get access to ARM AMBA
+ PrimeCell PL030 RTC found on certain ARM SOCs.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rtc-pl030.
+
config RTC_DRV_PL031
tristate "ARM AMBA PL031 RTC"
depends on ARM_AMBA
this is powered by the backup power supply.
config RTC_DRV_AT91SAM9
- tristate "AT91SAM9x"
+ tristate "AT91SAM9x/AT91CAP9"
depends on ARCH_AT91 && !(ARCH_AT91RM9200 || ARCH_AT91X40)
help
- RTC driver for the Atmel AT91SAM9x internal RTT (Real Time Timer).
- These timers are powered by the backup power supply (such as a
- small coin cell battery), but do not need to be used as RTCs.
+ RTC driver for the Atmel AT91SAM9x and AT91CAP9 internal RTT
+ (Real Time Timer). These timers are powered by the backup power
+ supply (such as a small coin cell battery), but do not need to
+ be used as RTCs.
(On AT91SAM9rl chips you probably want to use the dedicated RTC
module and leave the RTT available for other uses.)
config RTC_DRV_BFIN
tristate "Blackfin On-Chip RTC"
- depends on BLACKFIN
+ depends on BLACKFIN && !BF561
help
If you say yes here you will get support for the
Blackfin On-Chip Real Time Clock.
the RTC. This exposes that functionality through the generic RTC
class.
+config RTC_DRV_SUN4V
+ bool "SUN4V Hypervisor RTC"
+ depends on SPARC64
+ help
+ If you say Y here you will get support for the Hypervisor
+ based RTC on SUN4V systems.
+
+config RTC_DRV_STARFIRE
+ bool "Starfire RTC"
+ depends on SPARC64
+ help
+ If you say Y here you will get support for the RTC found on
+ Starfire systems.
+
endif # RTC_CLASS