#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/gpio.h>
#include <linux/mfd/wm831x/core.h>
#include <linux/mfd/wm831x/regulator.h>
#define WM831X_DCDC_CONTROL_2 1
#define WM831X_DCDC_ON_CONFIG 2
#define WM831X_DCDC_SLEEP_CONTROL 3
+#define WM831X_DCDC_DVS_CONTROL 4
/*
* Shared
int base;
struct wm831x *wm831x;
struct regulator_dev *regulator;
+ int dvs_gpio;
+ int dvs_gpio_state;
+ int on_vsel;
+ int dvs_vsel;
};
static int wm831x_dcdc_is_enabled(struct regulator_dev *rdev)
return -EINVAL;
}
-static int wm831x_buckv_set_voltage_int(struct regulator_dev *rdev, int reg,
- int min_uV, int max_uV)
+static int wm831x_buckv_select_min_voltage(struct regulator_dev *rdev,
+ int min_uV, int max_uV)
{
- struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
- struct wm831x *wm831x = dcdc->wm831x;
u16 vsel;
if (min_uV < 600000)
if (wm831x_buckv_list_voltage(rdev, vsel) > max_uV)
return -EINVAL;
- return wm831x_set_bits(wm831x, reg, WM831X_DC1_ON_VSEL_MASK, vsel);
+ return vsel;
+}
+
+static int wm831x_buckv_select_max_voltage(struct regulator_dev *rdev,
+ int min_uV, int max_uV)
+{
+ u16 vsel;
+
+ if (max_uV < 600000 || max_uV > 1800000)
+ return -EINVAL;
+
+ vsel = ((max_uV - 600000) / 12500) + 8;
+
+ if (wm831x_buckv_list_voltage(rdev, vsel) < min_uV ||
+ wm831x_buckv_list_voltage(rdev, vsel) < max_uV)
+ return -EINVAL;
+
+ return vsel;
+}
+
+static int wm831x_buckv_set_dvs(struct regulator_dev *rdev, int state)
+{
+ struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+
+ if (state == dcdc->dvs_gpio_state)
+ return 0;
+
+ dcdc->dvs_gpio_state = state;
+ gpio_set_value(dcdc->dvs_gpio, state);
+
+ /* Should wait for DVS state change to be asserted if we have
+ * a GPIO for it, for now assume the device is configured
+ * for the fastest possible transition.
+ */
+
+ return 0;
}
static int wm831x_buckv_set_voltage(struct regulator_dev *rdev,
- int min_uV, int max_uV)
+ int min_uV, int max_uV)
{
struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
- u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG;
+ struct wm831x *wm831x = dcdc->wm831x;
+ int on_reg = dcdc->base + WM831X_DCDC_ON_CONFIG;
+ int dvs_reg = dcdc->base + WM831X_DCDC_DVS_CONTROL;
+ int vsel, ret;
+
+ vsel = wm831x_buckv_select_min_voltage(rdev, min_uV, max_uV);
+ if (vsel < 0)
+ return vsel;
+
+ /* If this value is already set then do a GPIO update if we can */
+ if (dcdc->dvs_gpio && dcdc->on_vsel == vsel)
+ return wm831x_buckv_set_dvs(rdev, 0);
+
+ if (dcdc->dvs_gpio && dcdc->dvs_vsel == vsel)
+ return wm831x_buckv_set_dvs(rdev, 1);
+
+ /* Always set the ON status to the minimum voltage */
+ ret = wm831x_set_bits(wm831x, on_reg, WM831X_DC1_ON_VSEL_MASK, vsel);
+ if (ret < 0)
+ return ret;
+ dcdc->on_vsel = vsel;
+
+ if (!dcdc->dvs_gpio)
+ return ret;
- return wm831x_buckv_set_voltage_int(rdev, reg, min_uV, max_uV);
+ /* Kick the voltage transition now */
+ ret = wm831x_buckv_set_dvs(rdev, 0);
+ if (ret < 0)
+ return ret;
+
+ /* Set the high voltage as the DVS voltage. This is optimised
+ * for CPUfreq usage, most processors will keep the maximum
+ * voltage constant and lower the minimum with the frequency. */
+ vsel = wm831x_buckv_select_max_voltage(rdev, min_uV, max_uV);
+ if (vsel < 0) {
+ /* This should never happen - at worst the same vsel
+ * should be chosen */
+ WARN_ON(vsel < 0);
+ return 0;
+ }
+
+ /* Don't bother if it's the same VSEL we're already using */
+ if (vsel == dcdc->on_vsel)
+ return 0;
+
+ ret = wm831x_set_bits(wm831x, dvs_reg, WM831X_DC1_DVS_VSEL_MASK, vsel);
+ if (ret == 0)
+ dcdc->dvs_vsel = vsel;
+ else
+ dev_warn(wm831x->dev, "Failed to set DCDC DVS VSEL: %d\n",
+ ret);
+
+ return 0;
}
static int wm831x_buckv_set_suspend_voltage(struct regulator_dev *rdev,
- int uV)
+ int uV)
{
struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = dcdc->wm831x;
u16 reg = dcdc->base + WM831X_DCDC_SLEEP_CONTROL;
+ int vsel;
+
+ vsel = wm831x_buckv_select_min_voltage(rdev, uV, uV);
+ if (vsel < 0)
+ return vsel;
- return wm831x_buckv_set_voltage_int(rdev, reg, uV, uV);
+ return wm831x_set_bits(wm831x, reg, WM831X_DC1_SLP_VSEL_MASK, vsel);
}
static int wm831x_buckv_get_voltage(struct regulator_dev *rdev)
{
struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
- struct wm831x *wm831x = dcdc->wm831x;
- u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG;
- int val;
-
- val = wm831x_reg_read(wm831x, reg);
- if (val < 0)
- return val;
- return wm831x_buckv_list_voltage(rdev, val & WM831X_DC1_ON_VSEL_MASK);
+ if (dcdc->dvs_gpio && dcdc->dvs_gpio_state)
+ return wm831x_buckv_list_voltage(rdev, dcdc->dvs_vsel);
+ else
+ return wm831x_buckv_list_voltage(rdev, dcdc->on_vsel);
}
/* Current limit options */
.set_suspend_mode = wm831x_dcdc_set_suspend_mode,
};
+/*
+ * Set up DVS control. We just log errors since we can still run
+ * (with reduced performance) if we fail.
+ */
+static __devinit void wm831x_buckv_dvs_init(struct wm831x_dcdc *dcdc,
+ struct wm831x_buckv_pdata *pdata)
+{
+ struct wm831x *wm831x = dcdc->wm831x;
+ int ret;
+ u16 ctrl;
+
+ if (!pdata || !pdata->dvs_gpio)
+ return;
+
+ switch (pdata->dvs_control_src) {
+ case 1:
+ ctrl = 2 << WM831X_DC1_DVS_SRC_SHIFT;
+ break;
+ case 2:
+ ctrl = 3 << WM831X_DC1_DVS_SRC_SHIFT;
+ break;
+ default:
+ dev_err(wm831x->dev, "Invalid DVS control source %d for %s\n",
+ pdata->dvs_control_src, dcdc->name);
+ return;
+ }
+
+ ret = wm831x_set_bits(wm831x, dcdc->base + WM831X_DCDC_DVS_CONTROL,
+ WM831X_DC1_DVS_SRC_MASK, ctrl);
+ if (ret < 0) {
+ dev_err(wm831x->dev, "Failed to set %s DVS source: %d\n",
+ dcdc->name, ret);
+ return;
+ }
+
+ ret = gpio_request(pdata->dvs_gpio, "DCDC DVS");
+ if (ret < 0) {
+ dev_err(wm831x->dev, "Failed to get %s DVS GPIO: %d\n",
+ dcdc->name, ret);
+ return;
+ }
+
+ /* gpiolib won't let us read the GPIO status so pick the higher
+ * of the two existing voltages so we take it as platform data.
+ */
+ dcdc->dvs_gpio_state = pdata->dvs_init_state;
+
+ ret = gpio_direction_output(pdata->dvs_gpio, dcdc->dvs_gpio_state);
+ if (ret < 0) {
+ dev_err(wm831x->dev, "Failed to enable %s DVS GPIO: %d\n",
+ dcdc->name, ret);
+ gpio_free(pdata->dvs_gpio);
+ return;
+ }
+
+ dcdc->dvs_gpio = pdata->dvs_gpio;
+}
+
static __devinit int wm831x_buckv_probe(struct platform_device *pdev)
{
struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
dcdc->desc.ops = &wm831x_buckv_ops;
dcdc->desc.owner = THIS_MODULE;
+ ret = wm831x_reg_read(wm831x, dcdc->base + WM831X_DCDC_ON_CONFIG);
+ if (ret < 0) {
+ dev_err(wm831x->dev, "Failed to read ON VSEL: %d\n", ret);
+ goto err;
+ }
+ dcdc->on_vsel = ret & WM831X_DC1_ON_VSEL_MASK;
+
+ ret = wm831x_reg_read(wm831x, dcdc->base + WM831X_DCDC_ON_CONFIG);
+ if (ret < 0) {
+ dev_err(wm831x->dev, "Failed to read DVS VSEL: %d\n", ret);
+ goto err;
+ }
+ dcdc->dvs_vsel = ret & WM831X_DC1_DVS_VSEL_MASK;
+
+ if (pdata->dcdc[id])
+ wm831x_buckv_dvs_init(dcdc, pdata->dcdc[id]->driver_data);
+
dcdc->regulator = regulator_register(&dcdc->desc, &pdev->dev,
pdata->dcdc[id], dcdc);
if (IS_ERR(dcdc->regulator)) {
err_regulator:
regulator_unregister(dcdc->regulator);
err:
+ if (dcdc->dvs_gpio)
+ gpio_free(dcdc->dvs_gpio);
kfree(dcdc);
return ret;
}
wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "HC"), dcdc);
wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc);
regulator_unregister(dcdc->regulator);
+ if (dcdc->dvs_gpio)
+ gpio_free(dcdc->dvs_gpio);
kfree(dcdc);
return 0;
},
};
+/*
+ * DCDC boost convertors
+ */
+
+static int wm831x_boostp_get_status(struct regulator_dev *rdev)
+{
+ struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = dcdc->wm831x;
+ int ret;
+
+ /* First, check for errors */
+ ret = wm831x_reg_read(wm831x, WM831X_DCDC_UV_STATUS);
+ if (ret < 0)
+ return ret;
+
+ if (ret & (1 << rdev_get_id(rdev))) {
+ dev_dbg(wm831x->dev, "DCDC%d under voltage\n",
+ rdev_get_id(rdev) + 1);
+ return REGULATOR_STATUS_ERROR;
+ }
+
+ /* Is the regulator on? */
+ ret = wm831x_reg_read(wm831x, WM831X_DCDC_STATUS);
+ if (ret < 0)
+ return ret;
+ if (ret & (1 << rdev_get_id(rdev)))
+ return REGULATOR_STATUS_ON;
+ else
+ return REGULATOR_STATUS_OFF;
+}
+
+static struct regulator_ops wm831x_boostp_ops = {
+ .get_status = wm831x_boostp_get_status,
+
+ .is_enabled = wm831x_dcdc_is_enabled,
+ .enable = wm831x_dcdc_enable,
+ .disable = wm831x_dcdc_disable,
+};
+
+static __devinit int wm831x_boostp_probe(struct platform_device *pdev)
+{
+ struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+ struct wm831x_pdata *pdata = wm831x->dev->platform_data;
+ int id = pdev->id % ARRAY_SIZE(pdata->dcdc);
+ struct wm831x_dcdc *dcdc;
+ struct resource *res;
+ int ret, irq;
+
+ dev_dbg(&pdev->dev, "Probing DCDC%d\n", id + 1);
+
+ if (pdata == NULL || pdata->dcdc[id] == NULL)
+ return -ENODEV;
+
+ dcdc = kzalloc(sizeof(struct wm831x_dcdc), GFP_KERNEL);
+ if (dcdc == NULL) {
+ dev_err(&pdev->dev, "Unable to allocate private data\n");
+ return -ENOMEM;
+ }
+
+ dcdc->wm831x = wm831x;
+
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "No I/O resource\n");
+ ret = -EINVAL;
+ goto err;
+ }
+ dcdc->base = res->start;
+
+ snprintf(dcdc->name, sizeof(dcdc->name), "DCDC%d", id + 1);
+ dcdc->desc.name = dcdc->name;
+ dcdc->desc.id = id;
+ dcdc->desc.type = REGULATOR_VOLTAGE;
+ dcdc->desc.ops = &wm831x_boostp_ops;
+ dcdc->desc.owner = THIS_MODULE;
+
+ dcdc->regulator = regulator_register(&dcdc->desc, &pdev->dev,
+ pdata->dcdc[id], dcdc);
+ if (IS_ERR(dcdc->regulator)) {
+ ret = PTR_ERR(dcdc->regulator);
+ dev_err(wm831x->dev, "Failed to register DCDC%d: %d\n",
+ id + 1, ret);
+ goto err;
+ }
+
+ irq = platform_get_irq_byname(pdev, "UV");
+ ret = wm831x_request_irq(wm831x, irq, wm831x_dcdc_uv_irq,
+ IRQF_TRIGGER_RISING, dcdc->name,
+ dcdc);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n",
+ irq, ret);
+ goto err_regulator;
+ }
+
+ platform_set_drvdata(pdev, dcdc);
+
+ return 0;
+
+err_regulator:
+ regulator_unregister(dcdc->regulator);
+err:
+ kfree(dcdc);
+ return ret;
+}
+
+static __devexit int wm831x_boostp_remove(struct platform_device *pdev)
+{
+ struct wm831x_dcdc *dcdc = platform_get_drvdata(pdev);
+ struct wm831x *wm831x = dcdc->wm831x;
+
+ wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc);
+ regulator_unregister(dcdc->regulator);
+ kfree(dcdc);
+
+ return 0;
+}
+
+static struct platform_driver wm831x_boostp_driver = {
+ .probe = wm831x_boostp_probe,
+ .remove = __devexit_p(wm831x_boostp_remove),
+ .driver = {
+ .name = "wm831x-boostp",
+ },
+};
+
+/*
+ * External Power Enable
+ *
+ * These aren't actually DCDCs but look like them in hardware so share
+ * code.
+ */
+
+#define WM831X_EPE_BASE 6
+
+static struct regulator_ops wm831x_epe_ops = {
+ .is_enabled = wm831x_dcdc_is_enabled,
+ .enable = wm831x_dcdc_enable,
+ .disable = wm831x_dcdc_disable,
+ .get_status = wm831x_dcdc_get_status,
+};
+
+static __devinit int wm831x_epe_probe(struct platform_device *pdev)
+{
+ struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+ struct wm831x_pdata *pdata = wm831x->dev->platform_data;
+ int id = pdev->id % ARRAY_SIZE(pdata->epe);
+ struct wm831x_dcdc *dcdc;
+ int ret;
+
+ dev_dbg(&pdev->dev, "Probing EPE%d\n", id + 1);
+
+ if (pdata == NULL || pdata->epe[id] == NULL)
+ return -ENODEV;
+
+ dcdc = kzalloc(sizeof(struct wm831x_dcdc), GFP_KERNEL);
+ if (dcdc == NULL) {
+ dev_err(&pdev->dev, "Unable to allocate private data\n");
+ return -ENOMEM;
+ }
+
+ dcdc->wm831x = wm831x;
+
+ /* For current parts this is correct; probably need to revisit
+ * in future.
+ */
+ snprintf(dcdc->name, sizeof(dcdc->name), "EPE%d", id + 1);
+ dcdc->desc.name = dcdc->name;
+ dcdc->desc.id = id + WM831X_EPE_BASE; /* Offset in DCDC registers */
+ dcdc->desc.ops = &wm831x_epe_ops;
+ dcdc->desc.type = REGULATOR_VOLTAGE;
+ dcdc->desc.owner = THIS_MODULE;
+
+ dcdc->regulator = regulator_register(&dcdc->desc, &pdev->dev,
+ pdata->epe[id], dcdc);
+ if (IS_ERR(dcdc->regulator)) {
+ ret = PTR_ERR(dcdc->regulator);
+ dev_err(wm831x->dev, "Failed to register EPE%d: %d\n",
+ id + 1, ret);
+ goto err;
+ }
+
+ platform_set_drvdata(pdev, dcdc);
+
+ return 0;
+
+err:
+ kfree(dcdc);
+ return ret;
+}
+
+static __devexit int wm831x_epe_remove(struct platform_device *pdev)
+{
+ struct wm831x_dcdc *dcdc = platform_get_drvdata(pdev);
+
+ regulator_unregister(dcdc->regulator);
+ kfree(dcdc);
+
+ return 0;
+}
+
+static struct platform_driver wm831x_epe_driver = {
+ .probe = wm831x_epe_probe,
+ .remove = __devexit_p(wm831x_epe_remove),
+ .driver = {
+ .name = "wm831x-epe",
+ },
+};
+
static int __init wm831x_dcdc_init(void)
{
int ret;
if (ret != 0)
pr_err("Failed to register WM831x BUCKP driver: %d\n", ret);
+ ret = platform_driver_register(&wm831x_boostp_driver);
+ if (ret != 0)
+ pr_err("Failed to register WM831x BOOST driver: %d\n", ret);
+
+ ret = platform_driver_register(&wm831x_epe_driver);
+ if (ret != 0)
+ pr_err("Failed to register WM831x EPE driver: %d\n", ret);
+
return 0;
}
subsys_initcall(wm831x_dcdc_init);
static void __exit wm831x_dcdc_exit(void)
{
+ platform_driver_unregister(&wm831x_epe_driver);
+ platform_driver_unregister(&wm831x_boostp_driver);
platform_driver_unregister(&wm831x_buckp_driver);
platform_driver_unregister(&wm831x_buckv_driver);
}
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff