*/
struct regulator_map {
struct list_head list;
- struct device *dev;
+ const char *dev_name; /* The dev_name() for the consumer */
const char *supply;
struct regulator_dev *regulator;
};
struct regulator_dev *rdev = dev_get_drvdata(dev);
const char *name;
- if (rdev->constraints->name)
+ if (rdev->constraints && rdev->constraints->name)
name = rdev->constraints->name;
else if (rdev->desc->name)
name = rdev->desc->name;
struct device_attribute *attr, char *buf)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
+ ssize_t ret;
+
+ mutex_lock(&rdev->mutex);
+ ret = regulator_print_state(buf, _regulator_is_enabled(rdev));
+ mutex_unlock(&rdev->mutex);
- return regulator_print_state(buf, _regulator_is_enabled(rdev));
+ return ret;
}
static DEVICE_ATTR(state, 0444, regulator_state_show, NULL);
int cmin = constraints->min_uV;
int cmax = constraints->max_uV;
- /* it's safe to autoconfigure fixed-voltage supplies */
+ /* it's safe to autoconfigure fixed-voltage supplies
+ and the constraints are used by list_voltage. */
if (count == 1 && !cmin) {
- cmin = INT_MIN;
+ cmin = 1;
cmax = INT_MAX;
+ constraints->min_uV = cmin;
+ constraints->max_uV = cmax;
}
/* voltage constraints are optional */
* set_consumer_device_supply: Bind a regulator to a symbolic supply
* @rdev: regulator source
* @consumer_dev: device the supply applies to
+ * @consumer_dev_name: dev_name() string for device supply applies to
* @supply: symbolic name for supply
*
* Allows platform initialisation code to map physical regulator
* sources to symbolic names for supplies for use by devices. Devices
* should use these symbolic names to request regulators, avoiding the
* need to provide board-specific regulator names as platform data.
+ *
+ * Only one of consumer_dev and consumer_dev_name may be specified.
*/
static int set_consumer_device_supply(struct regulator_dev *rdev,
- struct device *consumer_dev, const char *supply)
+ struct device *consumer_dev, const char *consumer_dev_name,
+ const char *supply)
{
struct regulator_map *node;
+ int has_dev;
+
+ if (consumer_dev && consumer_dev_name)
+ return -EINVAL;
+
+ if (!consumer_dev_name && consumer_dev)
+ consumer_dev_name = dev_name(consumer_dev);
if (supply == NULL)
return -EINVAL;
+ if (consumer_dev_name != NULL)
+ has_dev = 1;
+ else
+ has_dev = 0;
+
list_for_each_entry(node, ®ulator_map_list, list) {
- if (consumer_dev != node->dev)
+ if (consumer_dev_name != node->dev_name)
continue;
if (strcmp(node->supply, supply) != 0)
continue;
return -EBUSY;
}
- node = kmalloc(sizeof(struct regulator_map), GFP_KERNEL);
+ node = kzalloc(sizeof(struct regulator_map), GFP_KERNEL);
if (node == NULL)
return -ENOMEM;
node->regulator = rdev;
- node->dev = consumer_dev;
node->supply = supply;
+ if (has_dev) {
+ node->dev_name = kstrdup(consumer_dev_name, GFP_KERNEL);
+ if (node->dev_name == NULL) {
+ kfree(node);
+ return -ENOMEM;
+ }
+ }
+
list_add(&node->list, ®ulator_map_list);
return 0;
}
static void unset_consumer_device_supply(struct regulator_dev *rdev,
- struct device *consumer_dev)
+ const char *consumer_dev_name, struct device *consumer_dev)
{
struct regulator_map *node, *n;
+ if (consumer_dev && !consumer_dev_name)
+ consumer_dev_name = dev_name(consumer_dev);
+
list_for_each_entry_safe(node, n, ®ulator_map_list, list) {
- if (rdev == node->regulator &&
- consumer_dev == node->dev) {
- list_del(&node->list);
- kfree(node);
- return;
- }
+ if (rdev != node->regulator)
+ continue;
+
+ if (consumer_dev_name && node->dev_name &&
+ strcmp(consumer_dev_name, node->dev_name))
+ continue;
+
+ list_del(&node->list);
+ kfree(node->dev_name);
+ kfree(node);
+ return;
}
}
list_for_each_entry_safe(node, n, ®ulator_map_list, list) {
if (rdev == node->regulator) {
list_del(&node->list);
+ kfree(node->dev_name);
kfree(node);
return;
}
return NULL;
}
-/**
- * regulator_get - lookup and obtain a reference to a regulator.
- * @dev: device for regulator "consumer"
- * @id: Supply name or regulator ID.
- *
- * Returns a struct regulator corresponding to the regulator producer,
- * or IS_ERR() condition containing errno.
- *
- * Use of supply names configured via regulator_set_device_supply() is
- * strongly encouraged. It is recommended that the supply name used
- * should match the name used for the supply and/or the relevant
- * device pins in the datasheet.
- */
-struct regulator *regulator_get(struct device *dev, const char *id)
+/* Internal regulator request function */
+static struct regulator *_regulator_get(struct device *dev, const char *id,
+ int exclusive)
{
struct regulator_dev *rdev;
struct regulator_map *map;
struct regulator *regulator = ERR_PTR(-ENODEV);
+ const char *devname = NULL;
+ int ret;
if (id == NULL) {
printk(KERN_ERR "regulator: get() with no identifier\n");
return regulator;
}
+ if (dev)
+ devname = dev_name(dev);
+
mutex_lock(®ulator_list_mutex);
list_for_each_entry(map, ®ulator_map_list, list) {
- if (dev == map->dev &&
- strcmp(map->supply, id) == 0) {
+ /* If the mapping has a device set up it must match */
+ if (map->dev_name &&
+ (!devname || strcmp(map->dev_name, devname)))
+ continue;
+
+ if (strcmp(map->supply, id) == 0) {
rdev = map->regulator;
goto found;
}
return regulator;
found:
+ if (rdev->exclusive) {
+ regulator = ERR_PTR(-EPERM);
+ goto out;
+ }
+
+ if (exclusive && rdev->open_count) {
+ regulator = ERR_PTR(-EBUSY);
+ goto out;
+ }
+
if (!try_module_get(rdev->owner))
goto out;
module_put(rdev->owner);
}
+ rdev->open_count++;
+ if (exclusive) {
+ rdev->exclusive = 1;
+
+ ret = _regulator_is_enabled(rdev);
+ if (ret > 0)
+ rdev->use_count = 1;
+ else
+ rdev->use_count = 0;
+ }
+
out:
mutex_unlock(®ulator_list_mutex);
+
return regulator;
}
+
+/**
+ * regulator_get - lookup and obtain a reference to a regulator.
+ * @dev: device for regulator "consumer"
+ * @id: Supply name or regulator ID.
+ *
+ * Returns a struct regulator corresponding to the regulator producer,
+ * or IS_ERR() condition containing errno.
+ *
+ * Use of supply names configured via regulator_set_device_supply() is
+ * strongly encouraged. It is recommended that the supply name used
+ * should match the name used for the supply and/or the relevant
+ * device pins in the datasheet.
+ */
+struct regulator *regulator_get(struct device *dev, const char *id)
+{
+ return _regulator_get(dev, id, 0);
+}
EXPORT_SYMBOL_GPL(regulator_get);
/**
+ * regulator_get_exclusive - obtain exclusive access to a regulator.
+ * @dev: device for regulator "consumer"
+ * @id: Supply name or regulator ID.
+ *
+ * Returns a struct regulator corresponding to the regulator producer,
+ * or IS_ERR() condition containing errno. Other consumers will be
+ * unable to obtain this reference is held and the use count for the
+ * regulator will be initialised to reflect the current state of the
+ * regulator.
+ *
+ * This is intended for use by consumers which cannot tolerate shared
+ * use of the regulator such as those which need to force the
+ * regulator off for correct operation of the hardware they are
+ * controlling.
+ *
+ * Use of supply names configured via regulator_set_device_supply() is
+ * strongly encouraged. It is recommended that the supply name used
+ * should match the name used for the supply and/or the relevant
+ * device pins in the datasheet.
+ */
+struct regulator *regulator_get_exclusive(struct device *dev, const char *id)
+{
+ return _regulator_get(dev, id, 1);
+}
+EXPORT_SYMBOL_GPL(regulator_get_exclusive);
+
+/**
* regulator_put - "free" the regulator source
* @regulator: regulator source
*
list_del(®ulator->list);
kfree(regulator);
+ rdev->open_count--;
+ rdev->exclusive = 0;
+
module_put(rdev->owner);
mutex_unlock(®ulator_list_mutex);
}
EXPORT_SYMBOL_GPL(regulator_put);
+static int _regulator_can_change_status(struct regulator_dev *rdev)
+{
+ if (!rdev->constraints)
+ return 0;
+
+ if (rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_STATUS)
+ return 1;
+ else
+ return 0;
+}
+
/* locks held by regulator_enable() */
static int _regulator_enable(struct regulator_dev *rdev)
{
- int ret = -EINVAL;
-
- if (!rdev->constraints) {
- printk(KERN_ERR "%s: %s has no constraints\n",
- __func__, rdev->desc->name);
- return ret;
- }
+ int ret;
/* do we need to enable the supply regulator first */
if (rdev->supply) {
}
/* check voltage and requested load before enabling */
- if (rdev->desc->ops->enable) {
-
- if (rdev->constraints &&
- (rdev->constraints->valid_ops_mask &
- REGULATOR_CHANGE_DRMS))
- drms_uA_update(rdev);
-
- ret = rdev->desc->ops->enable(rdev);
- if (ret < 0) {
- printk(KERN_ERR "%s: failed to enable %s: %d\n",
+ if (rdev->constraints &&
+ (rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_DRMS))
+ drms_uA_update(rdev);
+
+ if (rdev->use_count == 0) {
+ /* The regulator may on if it's not switchable or left on */
+ ret = _regulator_is_enabled(rdev);
+ if (ret == -EINVAL || ret == 0) {
+ if (!_regulator_can_change_status(rdev))
+ return -EPERM;
+
+ if (rdev->desc->ops->enable) {
+ ret = rdev->desc->ops->enable(rdev);
+ if (ret < 0)
+ return ret;
+ } else {
+ return -EINVAL;
+ }
+ } else if (ret < 0) {
+ printk(KERN_ERR "%s: is_enabled() failed for %s: %d\n",
__func__, rdev->desc->name, ret);
return ret;
}
- rdev->use_count++;
- return ret;
+ /* Fallthrough on positive return values - already enabled */
}
- return ret;
+ rdev->use_count++;
+
+ return 0;
}
/**
return -EIO;
/* are we the last user and permitted to disable ? */
- if (rdev->use_count == 1 && !rdev->constraints->always_on) {
+ if (rdev->use_count == 1 &&
+ (rdev->constraints && !rdev->constraints->always_on)) {
/* we are last user */
- if (rdev->desc->ops->disable) {
+ if (_regulator_can_change_status(rdev) &&
+ rdev->desc->ops->disable) {
ret = rdev->desc->ops->disable(rdev);
if (ret < 0) {
printk(KERN_ERR "%s: failed to disable %s\n",
static int _regulator_is_enabled(struct regulator_dev *rdev)
{
- int ret;
-
- mutex_lock(&rdev->mutex);
-
/* sanity check */
- if (!rdev->desc->ops->is_enabled) {
- ret = -EINVAL;
- goto out;
- }
+ if (!rdev->desc->ops->is_enabled)
+ return -EINVAL;
- ret = rdev->desc->ops->is_enabled(rdev);
-out:
- mutex_unlock(&rdev->mutex);
- return ret;
+ return rdev->desc->ops->is_enabled(rdev);
}
/**
*/
int regulator_is_enabled(struct regulator *regulator)
{
- return _regulator_is_enabled(regulator->rdev);
+ int ret;
+
+ mutex_lock(®ulator->rdev->mutex);
+ ret = _regulator_is_enabled(regulator->rdev);
+ mutex_unlock(®ulator->rdev->mutex);
+
+ return ret;
}
EXPORT_SYMBOL_GPL(regulator_is_enabled);
EXPORT_SYMBOL_GPL(regulator_list_voltage);
/**
+ * regulator_is_supported_voltage - check if a voltage range can be supported
+ *
+ * @regulator: Regulator to check.
+ * @min_uV: Minimum required voltage in uV.
+ * @max_uV: Maximum required voltage in uV.
+ *
+ * Returns a boolean or a negative error code.
+ */
+int regulator_is_supported_voltage(struct regulator *regulator,
+ int min_uV, int max_uV)
+{
+ int i, voltages, ret;
+
+ ret = regulator_count_voltages(regulator);
+ if (ret < 0)
+ return ret;
+ voltages = ret;
+
+ for (i = 0; i < voltages; i++) {
+ ret = regulator_list_voltage(regulator, i);
+
+ if (ret >= min_uV && ret <= max_uV)
+ return 1;
+ }
+
+ return 0;
+}
+
+/**
* regulator_set_voltage - set regulator output voltage
* @regulator: regulator source
* @min_uV: Minimum required voltage in uV
}
EXPORT_SYMBOL_GPL(regulator_notifier_call_chain);
+/**
+ * regulator_mode_to_status - convert a regulator mode into a status
+ *
+ * @mode: Mode to convert
+ *
+ * Convert a regulator mode into a status.
+ */
+int regulator_mode_to_status(unsigned int mode)
+{
+ switch (mode) {
+ case REGULATOR_MODE_FAST:
+ return REGULATOR_STATUS_FAST;
+ case REGULATOR_MODE_NORMAL:
+ return REGULATOR_STATUS_NORMAL;
+ case REGULATOR_MODE_IDLE:
+ return REGULATOR_STATUS_IDLE;
+ case REGULATOR_STATUS_STANDBY:
+ return REGULATOR_STATUS_STANDBY;
+ default:
+ return 0;
+ }
+}
+EXPORT_SYMBOL_GPL(regulator_mode_to_status);
+
/*
* To avoid cluttering sysfs (and memory) with useless state, only
* create attributes that can be meaningfully displayed.
for (i = 0; i < init_data->num_consumer_supplies; i++) {
ret = set_consumer_device_supply(rdev,
init_data->consumer_supplies[i].dev,
+ init_data->consumer_supplies[i].dev_name,
init_data->consumer_supplies[i].supply);
if (ret < 0) {
for (--i; i >= 0; i--)
unset_consumer_device_supply(rdev,
- init_data->consumer_supplies[i].dev);
+ init_data->consumer_supplies[i].dev_name,
+ init_data->consumer_supplies[i].dev);
goto scrub;
}
}
return;
mutex_lock(®ulator_list_mutex);
+ WARN_ON(rdev->open_count);
unset_regulator_supplies(rdev);
list_del(&rdev->list);
if (rdev->supply)
ops = rdev->desc->ops;
c = rdev->constraints;
- if (c->name)
+ if (c && c->name)
name = c->name;
else if (rdev->desc->name)
name = rdev->desc->name;
else
name = "regulator";
- if (!ops->disable || c->always_on)
+ if (!ops->disable || (c && c->always_on))
continue;
mutex_lock(&rdev->mutex);
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff