static DEFINE_MUTEX(regulator_list_mutex);
static LIST_HEAD(regulator_list);
static LIST_HEAD(regulator_map_list);
-
-/*
- * struct regulator_dev
- *
- * Voltage / Current regulator class device. One for each regulator.
- */
-struct regulator_dev {
- struct regulator_desc *desc;
- int use_count;
-
- /* lists we belong to */
- struct list_head list; /* list of all regulators */
- struct list_head slist; /* list of supplied regulators */
-
- /* lists we own */
- struct list_head consumer_list; /* consumers we supply */
- struct list_head supply_list; /* regulators we supply */
-
- struct blocking_notifier_head notifier;
- struct mutex mutex; /* consumer lock */
- struct module *owner;
- struct device dev;
- struct regulation_constraints *constraints;
- struct regulator_dev *supply; /* for tree */
-
- void *reg_data; /* regulator_dev data */
-};
+static int has_full_constraints;
/*
* struct regulator_map
*/
struct regulator_map {
struct list_head list;
- struct device *dev;
+ const char *dev_name; /* The dev_name() for the consumer */
const char *supply;
struct regulator_dev *regulator;
};
int uA_load;
int min_uV;
int max_uV;
- int enabled; /* count of client enables */
char *supply_name;
struct device_attribute dev_attr;
struct regulator_dev *rdev;
struct regulator_dev *rdev = dev_get_drvdata(dev);
const char *name;
- if (rdev->constraints->name)
+ if (rdev->constraints && rdev->constraints->name)
name = rdev->constraints->name;
else if (rdev->desc->name)
name = rdev->desc->name;
struct device_attribute *attr, char *buf)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
+ ssize_t ret;
- return regulator_print_state(buf, _regulator_is_enabled(rdev));
+ mutex_lock(&rdev->mutex);
+ ret = regulator_print_state(buf, _regulator_is_enabled(rdev));
+ mutex_unlock(&rdev->mutex);
+
+ return ret;
}
static DEVICE_ATTR(state, 0444, regulator_state_show, NULL);
err = regulator_check_drms(rdev);
if (err < 0 || !rdev->desc->ops->get_optimum_mode ||
- !rdev->desc->ops->get_voltage || !rdev->desc->ops->set_mode);
- return;
+ !rdev->desc->ops->get_voltage || !rdev->desc->ops->set_mode)
+ return;
/* get output voltage */
output_uV = rdev->desc->ops->get_voltage(rdev);
else
name = "regulator";
+ /* constrain machine-level voltage specs to fit
+ * the actual range supported by this regulator.
+ */
+ if (ops->list_voltage && rdev->desc->n_voltages) {
+ int count = rdev->desc->n_voltages;
+ int i;
+ int min_uV = INT_MAX;
+ int max_uV = INT_MIN;
+ int cmin = constraints->min_uV;
+ int cmax = constraints->max_uV;
+
+ /* it's safe to autoconfigure fixed-voltage supplies
+ and the constraints are used by list_voltage. */
+ if (count == 1 && !cmin) {
+ cmin = 1;
+ cmax = INT_MAX;
+ constraints->min_uV = cmin;
+ constraints->max_uV = cmax;
+ }
+
+ /* voltage constraints are optional */
+ if ((cmin == 0) && (cmax == 0))
+ goto out;
+
+ /* else require explicit machine-level constraints */
+ if (cmin <= 0 || cmax <= 0 || cmax < cmin) {
+ pr_err("%s: %s '%s' voltage constraints\n",
+ __func__, "invalid", name);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ /* initial: [cmin..cmax] valid, [min_uV..max_uV] not */
+ for (i = 0; i < count; i++) {
+ int value;
+
+ value = ops->list_voltage(rdev, i);
+ if (value <= 0)
+ continue;
+
+ /* maybe adjust [min_uV..max_uV] */
+ if (value >= cmin && value < min_uV)
+ min_uV = value;
+ if (value <= cmax && value > max_uV)
+ max_uV = value;
+ }
+
+ /* final: [min_uV..max_uV] valid iff constraints valid */
+ if (max_uV < min_uV) {
+ pr_err("%s: %s '%s' voltage constraints\n",
+ __func__, "unsupportable", name);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ /* use regulator's subset of machine constraints */
+ if (constraints->min_uV < min_uV) {
+ pr_debug("%s: override '%s' %s, %d -> %d\n",
+ __func__, name, "min_uV",
+ constraints->min_uV, min_uV);
+ constraints->min_uV = min_uV;
+ }
+ if (constraints->max_uV > max_uV) {
+ pr_debug("%s: override '%s' %s, %d -> %d\n",
+ __func__, name, "max_uV",
+ constraints->max_uV, max_uV);
+ constraints->max_uV = max_uV;
+ }
+ }
+
rdev->constraints = constraints;
/* do we need to apply the constraint voltage */
}
}
- /* are we enabled at boot time by firmware / bootloader */
- if (rdev->constraints->boot_on)
- rdev->use_count = 1;
-
/* do we need to setup our suspend state */
if (constraints->initial_state) {
ret = suspend_prepare(rdev, constraints->initial_state);
}
}
- /* if always_on is set then turn the regulator on if it's not
- * already on. */
- if (constraints->always_on && ops->enable &&
- ((ops->is_enabled && !ops->is_enabled(rdev)) ||
- (!ops->is_enabled && !constraints->boot_on))) {
+ if (constraints->initial_mode) {
+ if (!ops->set_mode) {
+ printk(KERN_ERR "%s: no set_mode operation for %s\n",
+ __func__, name);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ ret = ops->set_mode(rdev, constraints->initial_mode);
+ if (ret < 0) {
+ printk(KERN_ERR
+ "%s: failed to set initial mode for %s: %d\n",
+ __func__, name, ret);
+ goto out;
+ }
+ }
+
+ /* If the constraints say the regulator should be on at this point
+ * and we have control then make sure it is enabled.
+ */
+ if ((constraints->always_on || constraints->boot_on) && ops->enable) {
ret = ops->enable(rdev);
if (ret < 0) {
printk(KERN_ERR "%s: failed to enable %s\n",
* set_consumer_device_supply: Bind a regulator to a symbolic supply
* @rdev: regulator source
* @consumer_dev: device the supply applies to
+ * @consumer_dev_name: dev_name() string for device supply applies to
* @supply: symbolic name for supply
*
* Allows platform initialisation code to map physical regulator
* sources to symbolic names for supplies for use by devices. Devices
* should use these symbolic names to request regulators, avoiding the
* need to provide board-specific regulator names as platform data.
+ *
+ * Only one of consumer_dev and consumer_dev_name may be specified.
*/
static int set_consumer_device_supply(struct regulator_dev *rdev,
- struct device *consumer_dev, const char *supply)
+ struct device *consumer_dev, const char *consumer_dev_name,
+ const char *supply)
{
struct regulator_map *node;
+ int has_dev;
+
+ if (consumer_dev && consumer_dev_name)
+ return -EINVAL;
+
+ if (!consumer_dev_name && consumer_dev)
+ consumer_dev_name = dev_name(consumer_dev);
if (supply == NULL)
return -EINVAL;
+ if (consumer_dev_name != NULL)
+ has_dev = 1;
+ else
+ has_dev = 0;
+
list_for_each_entry(node, ®ulator_map_list, list) {
- if (consumer_dev != node->dev)
+ if (consumer_dev_name != node->dev_name)
continue;
if (strcmp(node->supply, supply) != 0)
continue;
return -EBUSY;
}
- node = kmalloc(sizeof(struct regulator_map), GFP_KERNEL);
+ node = kzalloc(sizeof(struct regulator_map), GFP_KERNEL);
if (node == NULL)
return -ENOMEM;
node->regulator = rdev;
- node->dev = consumer_dev;
node->supply = supply;
+ if (has_dev) {
+ node->dev_name = kstrdup(consumer_dev_name, GFP_KERNEL);
+ if (node->dev_name == NULL) {
+ kfree(node);
+ return -ENOMEM;
+ }
+ }
+
list_add(&node->list, ®ulator_map_list);
return 0;
}
static void unset_consumer_device_supply(struct regulator_dev *rdev,
- struct device *consumer_dev)
+ const char *consumer_dev_name, struct device *consumer_dev)
+{
+ struct regulator_map *node, *n;
+
+ if (consumer_dev && !consumer_dev_name)
+ consumer_dev_name = dev_name(consumer_dev);
+
+ list_for_each_entry_safe(node, n, ®ulator_map_list, list) {
+ if (rdev != node->regulator)
+ continue;
+
+ if (consumer_dev_name && node->dev_name &&
+ strcmp(consumer_dev_name, node->dev_name))
+ continue;
+
+ list_del(&node->list);
+ kfree(node->dev_name);
+ kfree(node);
+ return;
+ }
+}
+
+static void unset_regulator_supplies(struct regulator_dev *rdev)
{
struct regulator_map *node, *n;
list_for_each_entry_safe(node, n, ®ulator_map_list, list) {
- if (rdev == node->regulator &&
- consumer_dev == node->dev) {
+ if (rdev == node->regulator) {
list_del(&node->list);
+ kfree(node->dev_name);
kfree(node);
return;
}
return NULL;
}
-/**
- * regulator_get - lookup and obtain a reference to a regulator.
- * @dev: device for regulator "consumer"
- * @id: Supply name or regulator ID.
- *
- * Returns a struct regulator corresponding to the regulator producer,
- * or IS_ERR() condition containing errno. Use of supply names
- * configured via regulator_set_device_supply() is strongly
- * encouraged.
- */
-struct regulator *regulator_get(struct device *dev, const char *id)
+/* Internal regulator request function */
+static struct regulator *_regulator_get(struct device *dev, const char *id,
+ int exclusive)
{
struct regulator_dev *rdev;
struct regulator_map *map;
struct regulator *regulator = ERR_PTR(-ENODEV);
+ const char *devname = NULL;
+ int ret;
if (id == NULL) {
printk(KERN_ERR "regulator: get() with no identifier\n");
return regulator;
}
+ if (dev)
+ devname = dev_name(dev);
+
mutex_lock(®ulator_list_mutex);
list_for_each_entry(map, ®ulator_map_list, list) {
- if (dev == map->dev &&
- strcmp(map->supply, id) == 0) {
+ /* If the mapping has a device set up it must match */
+ if (map->dev_name &&
+ (!devname || strcmp(map->dev_name, devname)))
+ continue;
+
+ if (strcmp(map->supply, id) == 0) {
rdev = map->regulator;
goto found;
}
}
- printk(KERN_ERR "regulator: Unable to get requested regulator: %s\n",
- id);
mutex_unlock(®ulator_list_mutex);
return regulator;
found:
+ if (rdev->exclusive) {
+ regulator = ERR_PTR(-EPERM);
+ goto out;
+ }
+
+ if (exclusive && rdev->open_count) {
+ regulator = ERR_PTR(-EBUSY);
+ goto out;
+ }
+
if (!try_module_get(rdev->owner))
goto out;
module_put(rdev->owner);
}
+ rdev->open_count++;
+ if (exclusive) {
+ rdev->exclusive = 1;
+
+ ret = _regulator_is_enabled(rdev);
+ if (ret > 0)
+ rdev->use_count = 1;
+ else
+ rdev->use_count = 0;
+ }
+
out:
mutex_unlock(®ulator_list_mutex);
+
return regulator;
}
+
+/**
+ * regulator_get - lookup and obtain a reference to a regulator.
+ * @dev: device for regulator "consumer"
+ * @id: Supply name or regulator ID.
+ *
+ * Returns a struct regulator corresponding to the regulator producer,
+ * or IS_ERR() condition containing errno.
+ *
+ * Use of supply names configured via regulator_set_device_supply() is
+ * strongly encouraged. It is recommended that the supply name used
+ * should match the name used for the supply and/or the relevant
+ * device pins in the datasheet.
+ */
+struct regulator *regulator_get(struct device *dev, const char *id)
+{
+ return _regulator_get(dev, id, 0);
+}
EXPORT_SYMBOL_GPL(regulator_get);
/**
+ * regulator_get_exclusive - obtain exclusive access to a regulator.
+ * @dev: device for regulator "consumer"
+ * @id: Supply name or regulator ID.
+ *
+ * Returns a struct regulator corresponding to the regulator producer,
+ * or IS_ERR() condition containing errno. Other consumers will be
+ * unable to obtain this reference is held and the use count for the
+ * regulator will be initialised to reflect the current state of the
+ * regulator.
+ *
+ * This is intended for use by consumers which cannot tolerate shared
+ * use of the regulator such as those which need to force the
+ * regulator off for correct operation of the hardware they are
+ * controlling.
+ *
+ * Use of supply names configured via regulator_set_device_supply() is
+ * strongly encouraged. It is recommended that the supply name used
+ * should match the name used for the supply and/or the relevant
+ * device pins in the datasheet.
+ */
+struct regulator *regulator_get_exclusive(struct device *dev, const char *id)
+{
+ return _regulator_get(dev, id, 1);
+}
+EXPORT_SYMBOL_GPL(regulator_get_exclusive);
+
+/**
* regulator_put - "free" the regulator source
* @regulator: regulator source
*
mutex_lock(®ulator_list_mutex);
rdev = regulator->rdev;
- if (WARN(regulator->enabled, "Releasing supply %s while enabled\n",
- regulator->supply_name))
- _regulator_disable(rdev);
-
/* remove any sysfs entries */
if (regulator->dev) {
sysfs_remove_link(&rdev->dev.kobj, regulator->supply_name);
list_del(®ulator->list);
kfree(regulator);
+ rdev->open_count--;
+ rdev->exclusive = 0;
+
module_put(rdev->owner);
mutex_unlock(®ulator_list_mutex);
}
EXPORT_SYMBOL_GPL(regulator_put);
+static int _regulator_can_change_status(struct regulator_dev *rdev)
+{
+ if (!rdev->constraints)
+ return 0;
+
+ if (rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_STATUS)
+ return 1;
+ else
+ return 0;
+}
+
/* locks held by regulator_enable() */
static int _regulator_enable(struct regulator_dev *rdev)
{
- int ret = -EINVAL;
-
- if (!rdev->constraints) {
- printk(KERN_ERR "%s: %s has no constraints\n",
- __func__, rdev->desc->name);
- return ret;
- }
+ int ret;
/* do we need to enable the supply regulator first */
if (rdev->supply) {
}
/* check voltage and requested load before enabling */
- if (rdev->desc->ops->enable) {
-
- if (rdev->constraints &&
- (rdev->constraints->valid_ops_mask &
- REGULATOR_CHANGE_DRMS))
- drms_uA_update(rdev);
-
- ret = rdev->desc->ops->enable(rdev);
- if (ret < 0) {
- printk(KERN_ERR "%s: failed to enable %s: %d\n",
+ if (rdev->constraints &&
+ (rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_DRMS))
+ drms_uA_update(rdev);
+
+ if (rdev->use_count == 0) {
+ /* The regulator may on if it's not switchable or left on */
+ ret = _regulator_is_enabled(rdev);
+ if (ret == -EINVAL || ret == 0) {
+ if (!_regulator_can_change_status(rdev))
+ return -EPERM;
+
+ if (rdev->desc->ops->enable) {
+ ret = rdev->desc->ops->enable(rdev);
+ if (ret < 0)
+ return ret;
+ } else {
+ return -EINVAL;
+ }
+ } else if (ret < 0) {
+ printk(KERN_ERR "%s: is_enabled() failed for %s: %d\n",
__func__, rdev->desc->name, ret);
return ret;
}
- rdev->use_count++;
- return ret;
+ /* Fallthrough on positive return values - already enabled */
}
- return ret;
+ rdev->use_count++;
+
+ return 0;
}
/**
int ret = 0;
mutex_lock(&rdev->mutex);
- if (regulator->enabled == 0)
- ret = _regulator_enable(rdev);
- else if (regulator->enabled < 0)
- ret = -EIO;
- if (ret == 0)
- regulator->enabled++;
+ ret = _regulator_enable(rdev);
mutex_unlock(&rdev->mutex);
return ret;
}
{
int ret = 0;
+ if (WARN(rdev->use_count <= 0,
+ "unbalanced disables for %s\n",
+ rdev->desc->name))
+ return -EIO;
+
/* are we the last user and permitted to disable ? */
if (rdev->use_count == 1 && !rdev->constraints->always_on) {
/* we are last user */
- if (rdev->desc->ops->disable) {
+ if (_regulator_can_change_status(rdev) &&
+ rdev->desc->ops->disable) {
ret = rdev->desc->ops->disable(rdev);
if (ret < 0) {
printk(KERN_ERR "%s: failed to disable %s\n",
int ret = 0;
mutex_lock(&rdev->mutex);
- if (regulator->enabled == 1) {
- ret = _regulator_disable(rdev);
- if (ret == 0)
- regulator->uA_load = 0;
- } else if (WARN(regulator->enabled <= 0,
- "unbalanced disables for supply %s\n",
- regulator->supply_name))
- ret = -EIO;
- if (ret == 0)
- regulator->enabled--;
+ ret = _regulator_disable(rdev);
mutex_unlock(&rdev->mutex);
return ret;
}
int ret;
mutex_lock(®ulator->rdev->mutex);
- regulator->enabled = 0;
regulator->uA_load = 0;
ret = _regulator_force_disable(regulator->rdev);
mutex_unlock(®ulator->rdev->mutex);
static int _regulator_is_enabled(struct regulator_dev *rdev)
{
- int ret;
-
- mutex_lock(&rdev->mutex);
-
/* sanity check */
- if (!rdev->desc->ops->is_enabled) {
- ret = -EINVAL;
- goto out;
- }
+ if (!rdev->desc->ops->is_enabled)
+ return -EINVAL;
- ret = rdev->desc->ops->is_enabled(rdev);
-out:
- mutex_unlock(&rdev->mutex);
- return ret;
+ return rdev->desc->ops->is_enabled(rdev);
}
/**
*/
int regulator_is_enabled(struct regulator *regulator)
{
- return _regulator_is_enabled(regulator->rdev);
+ int ret;
+
+ mutex_lock(®ulator->rdev->mutex);
+ ret = _regulator_is_enabled(regulator->rdev);
+ mutex_unlock(®ulator->rdev->mutex);
+
+ return ret;
}
EXPORT_SYMBOL_GPL(regulator_is_enabled);
/**
+ * regulator_count_voltages - count regulator_list_voltage() selectors
+ * @regulator: regulator source
+ *
+ * Returns number of selectors, or negative errno. Selectors are
+ * numbered starting at zero, and typically correspond to bitfields
+ * in hardware registers.
+ */
+int regulator_count_voltages(struct regulator *regulator)
+{
+ struct regulator_dev *rdev = regulator->rdev;
+
+ return rdev->desc->n_voltages ? : -EINVAL;
+}
+EXPORT_SYMBOL_GPL(regulator_count_voltages);
+
+/**
+ * regulator_list_voltage - enumerate supported voltages
+ * @regulator: regulator source
+ * @selector: identify voltage to list
+ * Context: can sleep
+ *
+ * Returns a voltage that can be passed to @regulator_set_voltage(),
+ * zero if this selector code can't be used on this sytem, or a
+ * negative errno.
+ */
+int regulator_list_voltage(struct regulator *regulator, unsigned selector)
+{
+ struct regulator_dev *rdev = regulator->rdev;
+ struct regulator_ops *ops = rdev->desc->ops;
+ int ret;
+
+ if (!ops->list_voltage || selector >= rdev->desc->n_voltages)
+ return -EINVAL;
+
+ mutex_lock(&rdev->mutex);
+ ret = ops->list_voltage(rdev, selector);
+ mutex_unlock(&rdev->mutex);
+
+ if (ret > 0) {
+ if (ret < rdev->constraints->min_uV)
+ ret = 0;
+ else if (ret > rdev->constraints->max_uV)
+ ret = 0;
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_list_voltage);
+
+/**
+ * regulator_is_supported_voltage - check if a voltage range can be supported
+ *
+ * @regulator: Regulator to check.
+ * @min_uV: Minimum required voltage in uV.
+ * @max_uV: Maximum required voltage in uV.
+ *
+ * Returns a boolean or a negative error code.
+ */
+int regulator_is_supported_voltage(struct regulator *regulator,
+ int min_uV, int max_uV)
+{
+ int i, voltages, ret;
+
+ ret = regulator_count_voltages(regulator);
+ if (ret < 0)
+ return ret;
+ voltages = ret;
+
+ for (i = 0; i < voltages; i++) {
+ ret = regulator_list_voltage(regulator, i);
+
+ if (ret >= min_uV && ret <= max_uV)
+ return 1;
+ }
+
+ return 0;
+}
+
+/**
* regulator_set_voltage - set regulator output voltage
* @regulator: regulator source
* @min_uV: Minimum required voltage in uV
ret = rdev->desc->ops->set_voltage(rdev, min_uV, max_uV);
out:
+ _notifier_call_chain(rdev, REGULATOR_EVENT_VOLTAGE_CHANGE, NULL);
mutex_unlock(&rdev->mutex);
return ret;
}
}
EXPORT_SYMBOL_GPL(regulator_unregister_notifier);
-/* notify regulator consumers and downstream regulator consumers */
+/* notify regulator consumers and downstream regulator consumers.
+ * Note mutex must be held by caller.
+ */
static void _notifier_call_chain(struct regulator_dev *rdev,
unsigned long event, void *data)
{
struct regulator_dev *_rdev;
/* call rdev chain first */
- mutex_lock(&rdev->mutex);
blocking_notifier_call_chain(&rdev->notifier, event, NULL);
- mutex_unlock(&rdev->mutex);
/* now notify regulator we supply */
- list_for_each_entry(_rdev, &rdev->supply_list, slist)
- _notifier_call_chain(_rdev, event, data);
+ list_for_each_entry(_rdev, &rdev->supply_list, slist) {
+ mutex_lock(&_rdev->mutex);
+ _notifier_call_chain(_rdev, event, data);
+ mutex_unlock(&_rdev->mutex);
+ }
}
/**
*
* Called by regulator drivers to notify clients a regulator event has
* occurred. We also notify regulator clients downstream.
+ * Note lock must be held by caller.
*/
int regulator_notifier_call_chain(struct regulator_dev *rdev,
unsigned long event, void *data)
}
EXPORT_SYMBOL_GPL(regulator_notifier_call_chain);
+/**
+ * regulator_mode_to_status - convert a regulator mode into a status
+ *
+ * @mode: Mode to convert
+ *
+ * Convert a regulator mode into a status.
+ */
+int regulator_mode_to_status(unsigned int mode)
+{
+ switch (mode) {
+ case REGULATOR_MODE_FAST:
+ return REGULATOR_STATUS_FAST;
+ case REGULATOR_MODE_NORMAL:
+ return REGULATOR_STATUS_NORMAL;
+ case REGULATOR_MODE_IDLE:
+ return REGULATOR_STATUS_IDLE;
+ case REGULATOR_STATUS_STANDBY:
+ return REGULATOR_STATUS_STANDBY;
+ default:
+ return 0;
+ }
+}
+EXPORT_SYMBOL_GPL(regulator_mode_to_status);
+
/*
* To avoid cluttering sysfs (and memory) with useless state, only
* create attributes that can be meaningfully displayed.
* regulator_register - register regulator
* @regulator_desc: regulator to register
* @dev: struct device for the regulator
+ * @init_data: platform provided init data, passed through by driver
* @driver_data: private regulator data
*
* Called by regulator drivers to register a regulator.
* Returns 0 on success.
*/
struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
- struct device *dev, void *driver_data)
+ struct device *dev, struct regulator_init_data *init_data,
+ void *driver_data)
{
static atomic_t regulator_no = ATOMIC_INIT(0);
struct regulator_dev *rdev;
- struct regulator_init_data *init_data = dev->platform_data;
int ret, i;
if (regulator_desc == NULL)
if (regulator_desc->name == NULL || regulator_desc->ops == NULL)
return ERR_PTR(-EINVAL);
- if (!regulator_desc->type == REGULATOR_VOLTAGE &&
- !regulator_desc->type == REGULATOR_CURRENT)
+ if (regulator_desc->type != REGULATOR_VOLTAGE &&
+ regulator_desc->type != REGULATOR_CURRENT)
return ERR_PTR(-EINVAL);
if (!init_data)
for (i = 0; i < init_data->num_consumer_supplies; i++) {
ret = set_consumer_device_supply(rdev,
init_data->consumer_supplies[i].dev,
+ init_data->consumer_supplies[i].dev_name,
init_data->consumer_supplies[i].supply);
if (ret < 0) {
for (--i; i >= 0; i--)
unset_consumer_device_supply(rdev,
- init_data->consumer_supplies[i].dev);
+ init_data->consumer_supplies[i].dev_name,
+ init_data->consumer_supplies[i].dev);
goto scrub;
}
}
scrub:
device_unregister(&rdev->dev);
+ /* device core frees rdev */
+ rdev = ERR_PTR(ret);
+ goto out;
+
clean:
kfree(rdev);
rdev = ERR_PTR(ret);
return;
mutex_lock(®ulator_list_mutex);
+ WARN_ON(rdev->open_count);
+ unset_regulator_supplies(rdev);
list_del(&rdev->list);
if (rdev->supply)
sysfs_remove_link(&rdev->dev.kobj, "supply");
EXPORT_SYMBOL_GPL(regulator_suspend_prepare);
/**
+ * regulator_has_full_constraints - the system has fully specified constraints
+ *
+ * Calling this function will cause the regulator API to disable all
+ * regulators which have a zero use count and don't have an always_on
+ * constraint in a late_initcall.
+ *
+ * The intention is that this will become the default behaviour in a
+ * future kernel release so users are encouraged to use this facility
+ * now.
+ */
+void regulator_has_full_constraints(void)
+{
+ has_full_constraints = 1;
+}
+EXPORT_SYMBOL_GPL(regulator_has_full_constraints);
+
+/**
* rdev_get_drvdata - get rdev regulator driver data
* @rdev: regulator
*
/* init early to allow our consumers to complete system booting */
core_initcall(regulator_init);
+
+static int __init regulator_init_complete(void)
+{
+ struct regulator_dev *rdev;
+ struct regulator_ops *ops;
+ struct regulation_constraints *c;
+ int enabled, ret;
+ const char *name;
+
+ mutex_lock(®ulator_list_mutex);
+
+ /* If we have a full configuration then disable any regulators
+ * which are not in use or always_on. This will become the
+ * default behaviour in the future.
+ */
+ list_for_each_entry(rdev, ®ulator_list, list) {
+ ops = rdev->desc->ops;
+ c = rdev->constraints;
+
+ if (c && c->name)
+ name = c->name;
+ else if (rdev->desc->name)
+ name = rdev->desc->name;
+ else
+ name = "regulator";
+
+ if (!ops->disable || (c && c->always_on))
+ continue;
+
+ mutex_lock(&rdev->mutex);
+
+ if (rdev->use_count)
+ goto unlock;
+
+ /* If we can't read the status assume it's on. */
+ if (ops->is_enabled)
+ enabled = ops->is_enabled(rdev);
+ else
+ enabled = 1;
+
+ if (!enabled)
+ goto unlock;
+
+ if (has_full_constraints) {
+ /* We log since this may kill the system if it
+ * goes wrong. */
+ printk(KERN_INFO "%s: disabling %s\n",
+ __func__, name);
+ ret = ops->disable(rdev);
+ if (ret != 0) {
+ printk(KERN_ERR
+ "%s: couldn't disable %s: %d\n",
+ __func__, name, ret);
+ }
+ } else {
+ /* The intention is that in future we will
+ * assume that full constraints are provided
+ * so warn even if we aren't going to do
+ * anything here.
+ */
+ printk(KERN_WARNING
+ "%s: incomplete constraints, leaving %s on\n",
+ __func__, name);
+ }
+
+unlock:
+ mutex_unlock(&rdev->mutex);
+ }
+
+ mutex_unlock(®ulator_list_mutex);
+
+ return 0;
+}
+late_initcall(regulator_init_complete);