mfd: Mask and unmask wm8350 IRQs on request and free
[safe/jmp/linux-2.6] / drivers / regulator / Kconfig
index e7e0cf1..bcbb161 100644 (file)
@@ -1,6 +1,5 @@
 menuconfig REGULATOR
        bool "Voltage and Current Regulator Support"
-       default n
        help
          Generic Voltage and Current Regulator support.
 
@@ -29,12 +28,14 @@ config REGULATOR_DEBUG
          Say yes here to enable debugging support.
 
 config REGULATOR_FIXED_VOLTAGE
-       tristate
-       default n
+       tristate "Fixed voltage regulator support"
+       help
+         This driver provides support for fixed voltage regulators,
+         useful for systems which use a combination of software
+         managed regulators and simple non-configurable regulators.
 
 config REGULATOR_VIRTUAL_CONSUMER
        tristate "Virtual regulator consumer support"
-       default n
        help
          This driver provides a virtual consumer for the voltage and
           current regulator API which provides sysfs controls for
@@ -43,15 +44,45 @@ config REGULATOR_VIRTUAL_CONSUMER
 
           If unsure, say no.
 
+config REGULATOR_USERSPACE_CONSUMER
+       tristate "Userspace regulator consumer support"
+       help
+         There are some classes of devices that are controlled entirely
+         from user space. Userspace consumer driver provides ability to
+         control power supplies for such devices.
+
+          If unsure, say no.
+
 config REGULATOR_BQ24022
        tristate "TI bq24022 Dual Input 1-Cell Li-Ion Charger IC"
-       default n
        help
          This driver controls a TI bq24022 Charger attached via
          GPIOs. The provided current regulator can enable/disable
          charging select between 100 mA and 500 mA charging current
          limit.
 
+config REGULATOR_MAX1586
+       tristate "Maxim 1586/1587 voltage regulator"
+       depends on I2C
+       help
+         This driver controls a Maxim 1586 or 1587 voltage output
+         regulator via I2C bus. The provided regulator is suitable
+         for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
+
+config REGULATOR_TWL4030
+       bool "TI TWL4030/TWL5030/TPS695x0 PMIC"
+       depends on TWL4030_CORE
+       help
+         This driver supports the voltage regulators provided by
+         this family of companion chips.
+
+config REGULATOR_WM831X
+       tristate "Wolfson Microelcronics WM831x PMIC regulators"
+       depends on MFD_WM831X
+       help
+         Support the voltage and current regulators of the WM831x series
+         of PMIC devices.
+
 config REGULATOR_WM8350
        tristate "Wolfson Microelectroncis WM8350 AudioPlus PMIC"
        depends on MFD_WM8350
@@ -80,4 +111,51 @@ config REGULATOR_PCF50633
         Say Y here to support the voltage regulators and convertors
         on PCF50633
 
+config REGULATOR_LP3971
+       tristate "National Semiconductors LP3971 PMIC regulator driver"
+       depends on I2C
+       help
+        Say Y here to support the voltage regulators and convertors
+        on National Semiconductors LP3971 PMIC
+
+config REGULATOR_PCAP
+       tristate "PCAP2 regulator driver"
+       depends on EZX_PCAP
+       help
+        This driver provides support for the voltage regulators of the
+        PCAP2 PMIC.
+
+config REGULATOR_MC13783
+       tristate "Support regulators on Freescale MC13783 PMIC"
+       depends on MFD_MC13783
+       help
+         Say y here to support the regulators found on the Freescale MC13783
+         PMIC.
+
+config REGULATOR_AB3100
+       tristate "ST-Ericsson AB3100 Regulator functions"
+       depends on AB3100_CORE
+       default y if AB3100_CORE
+       help
+        These regulators correspond to functionality in the
+        AB3100 analog baseband dealing with power regulators
+        for the system.
+
+config REGULATOR_TPS65023
+       tristate "TI TPS65023 Power regulators"
+       depends on I2C
+       help
+         This driver supports TPS65023 voltage regulator chips. TPS65023 provides
+         three step-down converters and two general-purpose LDO voltage regulators.
+         It supports TI's software based Class-2 SmartReflex implementation.
+
+config REGULATOR_TPS6507X
+       tristate "TI TPS6507X Power regulators"
+       depends on I2C
+       help
+         This driver supports TPS6507X voltage regulator chips. TPS6507X provides
+         three step-down converters and two general-purpose LDO voltage regulators.
+         It supports TI's software based Class-2 SmartReflex implementation.
+
 endif
+