menuconfig REGULATOR
bool "Voltage and Current Regulator Support"
- default n
help
Generic Voltage and Current Regulator support.
help
Say yes here to enable debugging support.
+config REGULATOR_DUMMY
+ bool "Provide a dummy regulator if regulator lookups fail"
+ help
+ If this option is enabled then when a regulator lookup fails
+ and the board has not specified that it has provided full
+ constraints then the regulator core will provide an always
+ enabled dummy regulator will be provided, allowing consumer
+ drivers to continue.
+
+ A warning will be generated when this substitution is done.
+
config REGULATOR_FIXED_VOLTAGE
tristate "Fixed voltage regulator support"
- default n
help
This driver provides support for fixed voltage regulators,
useful for systems which use a combination of software
config REGULATOR_VIRTUAL_CONSUMER
tristate "Virtual regulator consumer support"
- default n
help
This driver provides a virtual consumer for the voltage and
current regulator API which provides sysfs controls for
If unsure, say no.
+config REGULATOR_USERSPACE_CONSUMER
+ tristate "Userspace regulator consumer support"
+ help
+ There are some classes of devices that are controlled entirely
+ from user space. Userspace consumer driver provides ability to
+ control power supplies for such devices.
+
+ If unsure, say no.
+
config REGULATOR_BQ24022
tristate "TI bq24022 Dual Input 1-Cell Li-Ion Charger IC"
- default n
help
This driver controls a TI bq24022 Charger attached via
GPIOs. The provided current regulator can enable/disable
config REGULATOR_MAX1586
tristate "Maxim 1586/1587 voltage regulator"
depends on I2C
- default n
help
This driver controls a Maxim 1586 or 1587 voltage output
regulator via I2C bus. The provided regulator is suitable
for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
+config REGULATOR_MAX8649
+ tristate "Maxim 8649 voltage regulator"
+ depends on I2C
+ help
+ This driver controls a Maxim 8649 voltage output regulator via
+ I2C bus.
+
+config REGULATOR_MAX8660
+ tristate "Maxim 8660/8661 voltage regulator"
+ depends on I2C
+ help
+ This driver controls a Maxim 8660/8661 voltage output
+ regulator via I2C bus.
+
config REGULATOR_TWL4030
- bool "TI TWL4030/TWL5030/TPS695x0 PMIC"
+ bool "TI TWL4030/TWL5030/TWL6030/TPS695x0 PMIC"
depends on TWL4030_CORE
help
This driver supports the voltage regulators provided by
this family of companion chips.
+config REGULATOR_WM831X
+ tristate "Wolfson Microelcronics WM831x PMIC regulators"
+ depends on MFD_WM831X
+ help
+ Support the voltage and current regulators of the WM831x series
+ of PMIC devices.
+
config REGULATOR_WM8350
- tristate "Wolfson Microelectroncis WM8350 AudioPlus PMIC"
+ tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
depends on MFD_WM8350
help
This driver provides support for the voltage and current regulators
of the WM8350 AudioPlus PMIC.
config REGULATOR_WM8400
- tristate "Wolfson Microelectroncis WM8400 AudioPlus PMIC"
+ tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
depends on MFD_WM8400
help
This driver provides support for the voltage regulators of the
WM8400 AudioPlus PMIC.
+config REGULATOR_WM8994
+ tristate "Wolfson Microelectronics WM8994 CODEC"
+ depends on MFD_WM8994
+ help
+ This driver provides support for the voltage regulators on the
+ WM8994 CODEC.
+
config REGULATOR_DA903X
tristate "Support regulators on Dialog Semiconductor DA9030/DA9034 PMIC"
depends on PMIC_DA903X
Say Y here to support the voltage regulators and convertors
on PCF50633
+config REGULATOR_LP3971
+ tristate "National Semiconductors LP3971 PMIC regulator driver"
+ depends on I2C
+ help
+ Say Y here to support the voltage regulators and convertors
+ on National Semiconductors LP3971 PMIC
+
+config REGULATOR_PCAP
+ tristate "PCAP2 regulator driver"
+ depends on EZX_PCAP
+ help
+ This driver provides support for the voltage regulators of the
+ PCAP2 PMIC.
+
+config REGULATOR_MC13783
+ tristate "Support regulators on Freescale MC13783 PMIC"
+ depends on MFD_MC13783
+ help
+ Say y here to support the regulators found on the Freescale MC13783
+ PMIC.
+
+config REGULATOR_AB3100
+ tristate "ST-Ericsson AB3100 Regulator functions"
+ depends on AB3100_CORE
+ default y if AB3100_CORE
+ help
+ These regulators correspond to functionality in the
+ AB3100 analog baseband dealing with power regulators
+ for the system.
+
+config REGULATOR_TPS65023
+ tristate "TI TPS65023 Power regulators"
+ depends on I2C
+ help
+ This driver supports TPS65023 voltage regulator chips. TPS65023 provides
+ three step-down converters and two general-purpose LDO voltage regulators.
+ It supports TI's software based Class-2 SmartReflex implementation.
+
+config REGULATOR_TPS6507X
+ tristate "TI TPS6507X Power regulators"
+ depends on I2C
+ help
+ This driver supports TPS6507X voltage regulator chips. TPS6507X provides
+ three step-down converters and two general-purpose LDO voltage regulators.
+ It supports TI's software based Class-2 SmartReflex implementation.
+
+config REGULATOR_88PM8607
+ bool "Marvell 88PM8607 Power regulators"
+ depends on MFD_88PM8607=y
+ help
+ This driver supports 88PM8607 voltage regulator chips.
+
endif
+