#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/types.h>
#include <linux/err.h>
+#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/power_supply.h>
#include <linux/jiffies.h>
#define BAT_STAT_AC 0x10
#define BAT_STAT_CHARGING 0x20
#define BAT_STAT_DISCHARGING 0x40
+#define BAT_STAT_TRICKLE 0x80
#define BAT_ERR_INFOFAIL 0x02
#define BAT_ERR_OVERVOLTAGE 0x04
static int olpc_bat_get_status(union power_supply_propval *val, uint8_t ec_byte)
{
if (olpc_platform_info.ecver > 0x44) {
- if (ec_byte & BAT_STAT_CHARGING)
+ if (ec_byte & (BAT_STAT_CHARGING | BAT_STAT_TRICKLE))
val->intval = POWER_SUPPLY_STATUS_CHARGING;
else if (ec_byte & BAT_STAT_DISCHARGING)
val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
It doesn't matter though -- the EC will return the last-known
information, and it's as if we just ran that _little_ bit faster
and managed to read it out before the battery went away. */
- if (!(ec_byte & BAT_STAT_PRESENT) && psp != POWER_SUPPLY_PROP_PRESENT)
+ if (!(ec_byte & (BAT_STAT_PRESENT | BAT_STAT_TRICKLE)) &&
+ psp != POWER_SUPPLY_PROP_PRESENT)
return -ENODEV;
switch (psp) {
if (ret)
return ret;
break;
+ case POWER_SUPPLY_PROP_CHARGE_TYPE:
+ if (ec_byte & BAT_STAT_TRICKLE)
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+ else if (ec_byte & BAT_STAT_CHARGING)
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST;
+ else
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE;
+ break;
case POWER_SUPPLY_PROP_PRESENT:
- val->intval = !!(ec_byte & BAT_STAT_PRESENT);
+ val->intval = !!(ec_byte & (BAT_STAT_PRESENT |
+ BAT_STAT_TRICKLE));
break;
case POWER_SUPPLY_PROP_HEALTH:
return ret;
val->intval = ec_byte;
break;
+ case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
+ if (ec_byte & BAT_STAT_FULL)
+ val->intval = POWER_SUPPLY_CAPACITY_LEVEL_FULL;
+ else if (ec_byte & BAT_STAT_LOW)
+ val->intval = POWER_SUPPLY_CAPACITY_LEVEL_LOW;
+ else
+ val->intval = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
+ break;
case POWER_SUPPLY_PROP_TEMP:
ret = olpc_ec_cmd(EC_BAT_TEMP, NULL, 0, (void *)&ec_word, 2);
if (ret)
static enum power_supply_property olpc_bat_props[] = {
POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_CHARGE_TYPE,
POWER_SUPPLY_PROP_PRESENT,
POWER_SUPPLY_PROP_HEALTH,
POWER_SUPPLY_PROP_TECHNOLOGY,
POWER_SUPPLY_PROP_VOLTAGE_AVG,
POWER_SUPPLY_PROP_CURRENT_AVG,
POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_CAPACITY_LEVEL,
POWER_SUPPLY_PROP_TEMP,
POWER_SUPPLY_PROP_TEMP_AMBIENT,
POWER_SUPPLY_PROP_MANUFACTURER,
.read = olpc_bat_eeprom_read,
};
+/* Allow userspace to see the specific error value pulled from the EC */
+
+static ssize_t olpc_bat_error_read(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ uint8_t ec_byte;
+ ssize_t ret;
+
+ ret = olpc_ec_cmd(EC_BAT_ERRCODE, NULL, 0, &ec_byte, 1);
+ if (ret < 0)
+ return ret;
+
+ return sprintf(buf, "%d\n", ec_byte);
+}
+
+static struct device_attribute olpc_bat_error = {
+ .attr = {
+ .name = "error",
+ .mode = S_IRUGO,
+ },
+ .show = olpc_bat_error_read,
+};
+
/*********************************************************************
* Initialisation
*********************************************************************/
if (ret)
goto eeprom_failed;
+ ret = device_create_file(olpc_bat.dev, &olpc_bat_error);
+ if (ret)
+ goto error_failed;
+
goto success;
+error_failed:
+ device_remove_bin_file(olpc_bat.dev, &olpc_bat_eeprom);
eeprom_failed:
power_supply_unregister(&olpc_bat);
battery_failed:
static void __exit olpc_bat_exit(void)
{
+ device_remove_file(olpc_bat.dev, &olpc_bat_error);
device_remove_bin_file(olpc_bat.dev, &olpc_bat_eeprom);
power_supply_unregister(&olpc_bat);
power_supply_unregister(&olpc_ac);