depends on NEW_LEDS
depends on BACKLIGHT_CLASS_DEVICE
depends on SERIO_I8042
- depends on RFKILL
+ depends on RFKILL || RFKILL = n
select ACPI_WMI
---help---
This is a driver for newer Acer (and Wistron) laptops. It adds
If you have an ACPI-WMI compatible Acer/ Wistron laptop, say Y or M
here.
+config ACERHDF
+ tristate "Acer Aspire One temperature and fan driver"
+ depends on THERMAL && THERMAL_HWMON && ACPI
+ ---help---
+ This is a driver for Acer Aspire One netbooks. It allows to access
+ the temperature sensor and to control the fan.
+
+ After loading this driver the BIOS is still in control of the fan.
+ To let the kernel handle the fan, do:
+ echo -n enabled > /sys/class/thermal/thermal_zone0/mode
+
+ For more information about this driver see
+ <http://piie.net/files/acerhdf_README.txt>
+
+ If you have an Acer Aspire One netbook, say Y or M
+ here.
+
config ASUS_LAPTOP
- tristate "Asus Laptop Extras (EXPERIMENTAL)"
+ tristate "Asus Laptop Extras"
depends on ACPI
- depends on EXPERIMENTAL && !ACPI_ASUS
+ depends on !ACPI_ASUS
select LEDS_CLASS
select NEW_LEDS
select BACKLIGHT_CLASS_DEVICE
---help---
This is the new Linux driver for Asus laptops. It may also support some
MEDION, JVC or VICTOR laptops. It makes all the extra buttons generate
- standard ACPI events that go through /proc/acpi/events. It also adds
+ standard ACPI events and input events. It also adds
support for video output switching, LCD backlight control, Bluetooth and
Wlan control, and most importantly, allows you to blink those fancy LEDs.
For more information and a userspace daemon for handling the extra
- buttons see <http://acpi4asus.sf.net/>.
+ buttons see <http://acpi4asus.sf.net>.
If you have an ACPI-compatible ASUS laptop, say Y or M here.
depends on DCDBAS
depends on EXPERIMENTAL
depends on BACKLIGHT_CLASS_DEVICE
- depends on RFKILL
+ depends on RFKILL || RFKILL = n
depends on POWER_SUPPLY
default n
---help---
depends on ACPI
depends on INPUT
depends on BACKLIGHT_CLASS_DEVICE
+ depends on LEDS_CLASS || LEDS_CLASS=n
---help---
This is a driver for laptops built by Fujitsu:
tristate "HP WMI extras"
depends on ACPI_WMI
depends on INPUT
- depends on RFKILL
+ depends on RFKILL || RFKILL = n
help
Say Y here if you want to support WMI-based hotkeys on HP laptops and
to read data from WMI such as docking or ambient light sensor state.
depends on ACPI
select BACKLIGHT_CLASS_DEVICE
depends on INPUT
+ depends on RFKILL
---help---
This mini-driver drives the SNC and SPIC devices present in the ACPI
BIOS of the Sony Vaio laptops.
tristate "ThinkPad ACPI Laptop Extras"
depends on ACPI
depends on INPUT
+ depends on RFKILL || RFKILL = n
select BACKLIGHT_LCD_SUPPORT
select BACKLIGHT_CLASS_DEVICE
select HWMON
select NVRAM
select NEW_LEDS
select LEDS_CLASS
- select NET
- select RFKILL
---help---
This is a driver for the IBM and Lenovo ThinkPad laptops. It adds
support for Fn-Fx key combinations, Bluetooth control, video
This driver was formerly known as ibm-acpi.
+ Extra functionality will be available if the rfkill (CONFIG_RFKILL)
+ and/or ALSA (CONFIG_SND) subsystems are available in the kernel.
+ Note that if you want ThinkPad-ACPI to be built-in instead of
+ modular, ALSA and rfkill will also have to be built-in.
+
If you have an IBM or Lenovo ThinkPad laptop, say Y or M here.
+config THINKPAD_ACPI_ALSA_SUPPORT
+ bool "Console audio control ALSA interface"
+ depends on THINKPAD_ACPI
+ depends on SND
+ depends on SND = y || THINKPAD_ACPI = SND
+ default y
+ ---help---
+ Enables monitoring of the built-in console audio output control
+ (headphone and speakers), which is operated by the mute and (in
+ some ThinkPad models) volume hotkeys.
+
+ If this option is enabled, ThinkPad-ACPI will export an ALSA card
+ with a single read-only mixer control, which should be used for
+ on-screen-display feedback purposes by the Desktop Environment.
+
+ Optionally, the driver will also allow software control (the
+ ALSA mixer will be made read-write). Please refer to the driver
+ documentation for details.
+
+ All IBM models have both volume and mute control. Newer Lenovo
+ models only have mute control (the volume hotkeys are just normal
+ keys and volume control is done through the main HDA mixer).
+
config THINKPAD_ACPI_DEBUGFACILITIES
bool "Maintainer debug facilities"
depends on THINKPAD_ACPI
If you are not sure, say N here.
-config THINKPAD_ACPI_DOCK
- bool "Legacy Docking Station Support"
+config THINKPAD_ACPI_UNSAFE_LEDS
+ bool "Allow control of important LEDs (unsafe)"
depends on THINKPAD_ACPI
- depends on ACPI_DOCK=n
default n
---help---
- Allows the thinkpad_acpi driver to handle docking station events.
- This support was made obsolete by the generic ACPI docking station
- support (CONFIG_ACPI_DOCK). It will allow locking and removing the
- laptop from the docking station, but will not properly connect PCI
- devices.
+ Overriding LED state on ThinkPads can mask important
+ firmware alerts (like critical battery condition), or misled
+ the user into damaging the hardware (undocking or ejecting
+ the bay while buses are still active), etc.
- If you are not sure, say N here.
+ LED control on the ThinkPad is write-only (with very few
+ exceptions on very ancient models), which makes it
+ impossible to know beforehand if important information will
+ be lost when one changes LED state.
-config THINKPAD_ACPI_BAY
- bool "Legacy Removable Bay Support"
- depends on THINKPAD_ACPI
- default y
- ---help---
- Allows the thinkpad_acpi driver to handle removable bays. It will
- electrically disable the device in the bay, and also generate
- notifications when the bay lever is ejected or inserted.
+ Users that know what they are doing can enable this option
+ and the driver will allow control of every LED, including
+ the ones on the dock stations.
- If you are not sure, say Y here.
+ Never enable this option on a distribution kernel.
+
+ Say N here, unless you are building a kernel for your own
+ use, and need to control the important firmware LEDs.
config THINKPAD_ACPI_VIDEO
bool "Video output control support"
depends on ACPI
depends on INPUT
depends on EXPERIMENTAL
+ depends on RFKILL || RFKILL = n
+ depends on HOTPLUG_PCI
select BACKLIGHT_CLASS_DEVICE
select HWMON
- select RFKILL
+ select LEDS_CLASS
+ select NEW_LEDS
+ select INPUT_SPARSEKMAP
---help---
This driver supports the Fn-Fx keys on Eee PC laptops.
- It also adds the ability to switch camera/wlan on/off.
+
+ It also gives access to some extra laptop functionalities like
+ Bluetooth, backlight and allows powering on/off some other
+ devices.
If you have an Eee PC laptop, say Y or M here.
It is safe to enable this driver even if your DSDT doesn't define
any ACPI-WMI devices.
+config MSI_WMI
+ tristate "MSI WMI extras"
+ depends on ACPI_WMI
+ depends on INPUT
+ depends on BACKLIGHT_CLASS_DEVICE
+ select INPUT_SPARSEKMAP
+ help
+ Say Y here if you want to support WMI-based hotkeys on MSI laptops.
+
+ To compile this driver as a module, choose M here: the module will
+ be called msi-wmi.
+
config ACPI_ASUS
- tristate "ASUS/Medion Laptop Extras"
+ tristate "ASUS/Medion Laptop Extras (DEPRECATED)"
depends on ACPI
select BACKLIGHT_CLASS_DEVICE
---help---
parameters.
More information and a userspace daemon for handling the extra buttons
- at <http://sourceforge.net/projects/acpi4asus/>.
+ at <http://acpi4asus.sf.net>.
If you have an ACPI-compatible ASUS laptop, say Y or M here. This
driver is still under development, so if your laptop is unsupported or
NOTE: This driver is deprecated and will probably be removed soon,
use asus-laptop instead.
+config TOPSTAR_LAPTOP
+ tristate "Topstar Laptop Extras"
+ depends on ACPI
+ depends on INPUT
+ ---help---
+ This driver adds support for hotkeys found on Topstar laptops.
+
+ If you have a Topstar laptop, say Y or M here.
+
config ACPI_TOSHIBA
tristate "Toshiba Laptop Extras"
depends on ACPI
depends on INPUT
+ depends on RFKILL || RFKILL = n
select INPUT_POLLDEV
- select NET
- select RFKILL
select BACKLIGHT_CLASS_DEVICE
---help---
This driver adds support for access to certain system settings
If you have a legacy free Toshiba laptop (such as the Libretto L1
series), say Y.
+
+config TOSHIBA_BT_RFKILL
+ tristate "Toshiba Bluetooth RFKill switch support"
+ depends on ACPI
+ ---help---
+ This driver adds support for Bluetooth events for the RFKill
+ switch on modern Toshiba laptops with full ACPI support and
+ an RFKill switch.
+
+ This driver handles RFKill events for the TOS6205 Bluetooth,
+ and re-enables it when the switch is set back to the 'on'
+ position.
+
+ If you have a modern Toshiba laptop with a Bluetooth and an
+ RFKill switch (such as the Portege R500), say Y.
+
+config ACPI_CMPC
+ tristate "CMPC Laptop Extras"
+ depends on X86 && ACPI
+ select INPUT
+ select BACKLIGHT_CLASS_DEVICE
+ default n
+ help
+ Support for Intel Classmate PC ACPI devices, including some
+ keys as input device, backlight device, tablet and accelerometer
+ devices.
+
endif # X86_PLATFORM_DEVICES
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff