*/
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/sched.h>
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/init.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
#include <asm/hardware/sa1111.h>
#include <asm/mach-types.h>
*/
GRER |= 0x00000002;
/* Set GPIO_A<3:1> to be outputs for PCMCIA/CF power controller: */
- PA_DDR = 0;
- PA_DWR = 0;
- PA_SDR = 0;
- PA_SSR = 0;
-
- PB_DDR = 0;
- PB_DWR = 0x01;
- PB_SDR = 0;
- PB_SSR = 0;
-
- PC_DDR = 0x88;
- PC_DWR = 0x20;
- PC_SDR = 0;
- PC_SSR = 0;
+ sa1111_set_io_dir(SA1111_DEV(skt->dev), GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0, 0);
+ sa1111_set_io(SA1111_DEV(skt->dev), GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0);
+ sa1111_set_sleep_io(SA1111_DEV(skt->dev), GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0);
return sa1111_pcmcia_hw_init(skt);
}
unsigned int pa_dwr_mask, pa_dwr_set;
int ret;
-printk("%s(): config socket %d vcc %d vpp %d\n", __FUNCTION__,
+printk("%s(): config socket %d vcc %d vpp %d\n", __func__,
skt->nr, state->Vcc, state->Vpp);
switch (skt->nr) {
if (state->Vpp != state->Vcc && state->Vpp != 0) {
printk(KERN_ERR "%s(): slot cannot support VPP %u\n",
- __FUNCTION__, state->Vpp);
+ __func__, state->Vpp);
return -1;
}
unsigned long flags;
local_irq_save(flags);
- PA_DWR = (PA_DWR & ~pa_dwr_mask) | pa_dwr_set;
+ sa1111_set_io(SA1111_DEV(skt->dev), pa_dwr_mask, pa_dwr_set);
local_irq_restore(flags);
}
.socket_suspend = sa1111_pcmcia_socket_suspend,
};
-int __init pcmcia_jornada720_init(struct device *dev)
+int __devinit pcmcia_jornada720_init(struct device *dev)
{
int ret = -ENODEV;