get rid of insanity with namespace roots in tomoyo

[safe/jmp/linux-2.6] / drivers / pcmcia / pxa2xx_lubbock.c

diff --git a/drivers/pcmcia/pxa2xx_lubbock.c b/drivers/pcmcia/pxa2xx_lubbock.c
index fd1f691..b9f8c8f 100644 (file)
--- a/drivers/pcmcia/pxa2xx_lubbock.c
+++ b/drivers/pcmcia/pxa2xx_lubbock.c
@@ -16,53 +16,23 @@
  */
 #include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/sched.h>
 #include <linux/device.h>
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/delay.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/sa1111.h>
 #include <asm/mach-types.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/lubbock.h>
+#include <mach/lubbock.h>
 
 #include "sa1111_generic.h"
 
 static int
-lubbock_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
-       /*
-        * Setup default state of GPIO outputs
-        * before we enable them as outputs.
-        */
-       GPSR(GPIO48_nPOE) =
-               GPIO_bit(GPIO48_nPOE) |
-               GPIO_bit(GPIO49_nPWE) |
-               GPIO_bit(GPIO50_nPIOR) |
-               GPIO_bit(GPIO51_nPIOW) |
-               GPIO_bit(GPIO52_nPCE_1) |
-               GPIO_bit(GPIO53_nPCE_2);
-
-       pxa_gpio_mode(GPIO48_nPOE_MD);
-       pxa_gpio_mode(GPIO49_nPWE_MD);
-       pxa_gpio_mode(GPIO50_nPIOR_MD);
-       pxa_gpio_mode(GPIO51_nPIOW_MD);
-       pxa_gpio_mode(GPIO52_nPCE_1_MD);
-       pxa_gpio_mode(GPIO53_nPCE_2_MD);
-       pxa_gpio_mode(GPIO54_pSKTSEL_MD);
-       pxa_gpio_mode(GPIO55_nPREG_MD);
-       pxa_gpio_mode(GPIO56_nPWAIT_MD);
-       pxa_gpio_mode(GPIO57_nIOIS16_MD);
-
-       return sa1111_pcmcia_hw_init(skt);
-}
-
-static int
 lubbock_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
                                const socket_state_t *state)
 {
+       struct sa1111_pcmcia_socket *s = to_skt(skt);
        unsigned int pa_dwr_mask, pa_dwr_set, misc_mask, misc_set;
        int ret = 0;
 
@@ -117,7 +87,7 @@ lubbock_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
 
                default:
                        printk(KERN_ERR "%s(): unrecognized Vcc %u\n",
-                              __FUNCTION__, state->Vcc);
+                              __func__, state->Vcc);
                        ret = -1;
                }
 
@@ -134,7 +104,7 @@ lubbock_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
                                pa_dwr_set |= GPIO_A0;
                        else {
                                printk(KERN_ERR "%s(): unrecognized Vpp %u\n",
-                                      __FUNCTION__, state->Vpp);
+                                      __func__, state->Vpp);
                                ret = -1;
                                break;
                        }
@@ -158,14 +128,14 @@ lubbock_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
 
                default:
                        printk(KERN_ERR "%s(): unrecognized Vcc %u\n",
-                              __FUNCTION__, state->Vcc);
+                              __func__, state->Vcc);
                        ret = -1;
                        break;
                }
 
                if (state->Vpp != state->Vcc && state->Vpp != 0) {
                        printk(KERN_ERR "%s(): CF slot cannot support Vpp %u\n",
-                              __FUNCTION__, state->Vpp);
+                              __func__, state->Vpp);
                        ret = -1;
                        break;
                }
@@ -180,7 +150,7 @@ lubbock_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
 
        if (ret == 0) {
                lubbock_set_misc_wr(misc_mask, misc_set);
-               sa1111_set_io(SA1111_DEV(skt->dev), pa_dwr_mask, pa_dwr_set);
+               sa1111_set_io(s->dev, pa_dwr_mask, pa_dwr_set);
        }
 
 #if 1
@@ -206,7 +176,7 @@ lubbock_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
                         * Switch to 5V,  Configure socket with 5V voltage
                         */
                        lubbock_set_misc_wr(misc_mask, 0);
-                       sa1111_set_io(SA1111_DEV(skt->dev), pa_dwr_mask, 0);
+                       sa1111_set_io(s->dev, pa_dwr_mask, 0);
 
                        /*
                         * It takes about 100ms to turn off Vcc.
@@ -231,19 +201,15 @@ lubbock_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
 
 static struct pcmcia_low_level lubbock_pcmcia_ops = {
        .owner                  = THIS_MODULE,
-       .hw_init                = lubbock_pcmcia_hw_init,
-       .hw_shutdown            = sa1111_pcmcia_hw_shutdown,
-       .socket_state           = sa1111_pcmcia_socket_state,
        .configure_socket       = lubbock_pcmcia_configure_socket,
        .socket_init            = sa1111_pcmcia_socket_init,
-       .socket_suspend         = sa1111_pcmcia_socket_suspend,
        .first                  = 0,
        .nr                     = 2,
 };
 
 #include "pxa2xx_base.h"
 
-int __init pcmcia_lubbock_init(struct sa1111_dev *sadev)
+int pcmcia_lubbock_init(struct sa1111_dev *sadev)
 {
        int ret = -ENODEV;
 
@@ -259,8 +225,9 @@ int __init pcmcia_lubbock_init(struct sa1111_dev *sadev)
                /* Set CF Socket 1 power to standby mode. */
                lubbock_set_misc_wr((1 << 15) | (1 << 14), 0);
 
-               sadev->dev.platform_data = &lubbock_pcmcia_ops;
-               ret = pxa2xx_drv_pcmcia_probe(&sadev->dev);
+               pxa2xx_drv_pcmcia_ops(&lubbock_pcmcia_ops);
+               ret = sa1111_pcmcia_add(sadev, &lubbock_pcmcia_ops,
+                               pxa2xx_drv_pcmcia_add_one);
        }
 
        return ret;