#include <linux/pm.h>
#include <linux/platform_device.h>
#include <linux/resource.h>
+#include <linux/slab.h>
#include <linux/spinlock.h>
#include <pcmcia/cs_types.h>
int nr; /* socket number */
void *virt_io;
- /* the "pseudo" addresses of the PCMCIA space. */
phys_addr_t phys_io;
phys_addr_t phys_attr;
phys_addr_t phys_mem;
static int db1x_pcmcia_setup_irqs(struct db1x_pcmcia_sock *sock)
{
int ret;
- unsigned long flags;
if (sock->stschg_irq != -1) {
ret = request_irq(sock->stschg_irq, db1000_pcmcia_stschgirq,
* active one disabled.
*/
if (sock->board_type == BOARD_TYPE_DB1200) {
- local_irq_save(flags);
-
ret = request_irq(sock->insert_irq, db1200_pcmcia_cdirq,
IRQF_DISABLED, "pcmcia_insert", sock);
if (ret)
IRQF_DISABLED, "pcmcia_eject", sock);
if (ret) {
free_irq(sock->insert_irq, sock);
- local_irq_restore(flags);
goto out1;
}
- /* disable the currently active one */
+ /* enable the currently silent one */
if (db1200_card_inserted(sock))
- disable_irq_nosync(sock->insert_irq);
+ enable_irq(sock->eject_irq);
else
- disable_irq_nosync(sock->eject_irq);
-
- local_irq_restore(flags);
+ enable_irq(sock->insert_irq);
} else {
/* all other (older) Db1x00 boards use a GPIO to show
* card detection status: use both-edge triggers.
* This includes IRQs for Carddetection/ejection, the card
* itself and optional status change detection.
* Also, the memory areas covered by a socket. For these
- * we require the 32bit "pseudo" addresses (see the au1000.h
+ * we require the real 36bit addresses (see the au1000.h
* header for more information).
*/
ret = -ENODEV;
- /*
- * pseudo-attr: The 32bit address of the PCMCIA attribute space
- * for this socket (usually the 36bit address shifted 4 to the
- * right).
- */
+ /* 36bit PCMCIA Attribute area address */
r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcmcia-attr");
if (!r) {
printk(KERN_ERR "pcmcia%d has no 'pseudo-attr' resource!\n",
}
sock->phys_attr = r->start;
- /*
- * pseudo-mem: The 32bit address of the PCMCIA memory space for
- * this socket (usually the 36bit address shifted 4 to the right)
- */
+ /* 36bit PCMCIA Memory area address */
r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcmcia-mem");
if (!r) {
printk(KERN_ERR "pcmcia%d has no 'pseudo-mem' resource!\n",
}
sock->phys_mem = r->start;
- /*
- * pseudo-io: The 32bit address of the PCMCIA IO space for this
- * socket (usually the 36bit address shifted 4 to the right).
- */
+ /* 36bit PCMCIA IO area address */
r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcmcia-io");
if (!r) {
printk(KERN_ERR "pcmcia%d has no 'pseudo-io' resource!\n",
return 0;
}
-#ifdef CONFIG_PM
-static int db1x_pcmcia_suspend(struct device *dev)
-{
- return pcmcia_socket_dev_suspend(dev);
-}
-
-static int db1x_pcmcia_resume(struct device *dev)
-{
- return pcmcia_socket_dev_resume(dev);
-}
-
-static struct dev_pm_ops db1x_pcmcia_pmops = {
- .resume = db1x_pcmcia_resume,
- .suspend = db1x_pcmcia_suspend,
- .thaw = db1x_pcmcia_resume,
- .freeze = db1x_pcmcia_suspend,
-};
-
-#define DB1XXX_SS_PMOPS &db1x_pcmcia_pmops
-
-#else
-
-#define DB1XXX_SS_PMOPS NULL
-
-#endif
-
static struct platform_driver db1x_pcmcia_socket_driver = {
.driver = {
.name = "db1xxx_pcmcia",
.owner = THIS_MODULE,
- .pm = DB1XXX_SS_PMOPS
},
.probe = db1x_pcmcia_socket_probe,
.remove = __devexit_p(db1x_pcmcia_socket_remove),