#
-# PCMCIA bus subsystem configuration
+# PCCARD (PCMCIA/CardBus) bus subsystem configuration
#
-# Right now the non-CardBus choices are not supported
-# by the integrated kernel driver.
-#
-
-menu "PCCARD (PCMCIA/CardBus) support"
-config PCCARD
+menuconfig PCCARD
tristate "PCCard (PCMCIA/CardBus) support"
- select HOTPLUG
+ depends on HOTPLUG
---help---
Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
computer. These are credit-card size devices such as network cards,
if PCCARD
-config PCMCIA_DEBUG
- bool "Enable PCCARD debugging"
- help
- Say Y here to enable PCMCIA subsystem debugging. You
- will need to choose the debugging level either via the
- kernel command line, or module options depending whether
- you build the PCMCIA as modules.
-
- The kernel command line options are:
- pcmcia_core.pc_debug=N
- ds.pc_debug=N
- sa11xx_core.pc_debug=N
-
- The module option is called pc_debug=N
-
- In all the above examples, N is the debugging verbosity
- level.
-
config PCMCIA
tristate "16-bit PCMCIA support"
select CRC32
If unsure, say Y.
config PCMCIA_IOCTL
- bool
+ bool "PCMCIA control ioctl (obsolete)"
depends on PCMCIA
default y
help
subsystem will be built. It is needed by cardmgr and cardctl
(pcmcia-cs) to function properly.
- If you do not use the new pcmciautils package, and have a
- yenta, Cirrus PD6729, i82092, i82365 or tcic compatible bridge,
- you need to say Y here to be able to use 16-bit PCMCIA cards.
+ You should use the new pcmciautils package instead (see
+ <file:Documentation/Changes> for location and details).
If unsure, say Y.
config YENTA
tristate "CardBus yenta-compatible bridge support"
- depends on CARDBUS
+ depends on PCI
+ select CARDBUS if !EMBEDDED
select PCCARD_NONSTATIC
---help---
This option enables support for CardBus host bridges. Virtually
If unsure, say Y.
+config YENTA_O2
+ default y
+ bool "Special initialization for O2Micro bridges" if EMBEDDED
+ depends on YENTA
+
+config YENTA_RICOH
+ default y
+ bool "Special initialization for Ricoh bridges" if EMBEDDED
+ depends on YENTA
+
+config YENTA_TI
+ default y
+ bool "Special initialization for TI and EnE bridges" if EMBEDDED
+ depends on YENTA
+
+config YENTA_ENE_TUNE
+ default y
+ bool "Auto-tune EnE bridges for CB cards" if EMBEDDED
+ depends on YENTA_TI && CARDBUS
+
+config YENTA_TOSHIBA
+ default y
+ bool "Special initialization for Toshiba ToPIC bridges" if EMBEDDED
+ depends on YENTA
+
config PD6729
tristate "Cirrus PD6729 compatible bridge support"
depends on PCMCIA && PCI
config TCIC
tristate "Databook TCIC host bridge support"
- depends on PCMCIA
+ depends on PCMCIA && ISA
select PCCARD_NONSTATIC
help
Say Y here to include support for the Databook TCIC family of PCMCIA
"Bridge" is the name used for the hardware inside your computer that
PCMCIA cards are plugged into. If unsure, say N.
-config HD64465_PCMCIA
- tristate "HD64465 host bridge support"
- depends on HD64465 && PCMCIA
+config PCMCIA_M8XX
+ tristate "MPC8xx PCMCIA support"
+ depends on PCMCIA && PPC && 8xx
+ select PCCARD_IODYN
+ select PCCARD_NONSTATIC
+ help
+ Say Y here to include support for PowerPC 8xx series PCMCIA
+ controller.
+
+ This driver is also available as a module called m8xx_pcmcia.
config PCMCIA_AU1X00
tristate "Au1x00 pcmcia support"
depends on SOC_AU1X00 && PCMCIA
+config PCMCIA_BCM63XX
+ tristate "bcm63xx pcmcia support"
+ depends on BCM63XX && PCMCIA
+
+config PCMCIA_SOC_COMMON
+ bool
+
config PCMCIA_SA1100
tristate "SA1100 support"
depends on ARM && ARCH_SA1100 && PCMCIA
+ select PCMCIA_SOC_COMMON
help
Say Y here to include support for SA11x0-based PCMCIA or CF
sockets, found on HP iPAQs, Yopy, and other StrongARM(R)/
config PCMCIA_SA1111
tristate "SA1111 support"
depends on ARM && ARCH_SA1100 && SA1111 && PCMCIA
+ select PCMCIA_SOC_COMMON
help
Say Y here to include support for SA1111-based PCMCIA or CF
sockets, found on the Jornada 720, Graphicsmaster and other
config PCMCIA_PXA2XX
tristate "PXA2xx support"
depends on ARM && ARCH_PXA && PCMCIA
+ depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \
+ || MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \
+ || ARCH_VIPER || ARCH_PXA_ESERIES || MACH_STARGATE2)
+ select PCMCIA_SOC_COMMON
help
Say Y here to include support for the PXA2xx PCMCIA controller
+config PCMCIA_DEBUG
+ bool "Enable debugging"
+ depends on (PCMCIA_SA1111 || PCMCIA_SA1100 || PCMCIA_PXA2XX)
+ help
+ Say Y here to enable debugging for the SoC PCMCIA layer.
+ You will need to choose the debugging level either via the
+ kernel command line, or module options depending whether
+ you build the drivers as modules.
+
+ The kernel command line options are:
+ sa11xx_core.pc_debug=N
+ pxa2xx_core.pc_debug=N
+
+ The module option is called pc_debug=N
+
+ In all the above examples, N is the debugging verbosity
+ level.
+
config PCMCIA_PROBE
bool
- default y if ISA && !ARCH_SA1100 && !ARCH_CLPS711X
+ default y if ISA && !ARCH_SA1100 && !ARCH_CLPS711X && !PARISC
config M32R_PCC
bool "M32R PCMCIA I/F"
config PCMCIA_VRC4171
tristate "NEC VRC4171 Card Controllers support"
- depends on VRC4171 && PCMCIA
+ depends on CPU_VR41XX && ISA && PCMCIA
config PCMCIA_VRC4173
tristate "NEC VRC4173 CARDU support"
depends on CPU_VR41XX && PCI && PCMCIA
+config OMAP_CF
+ tristate "OMAP CompactFlash Controller"
+ depends on PCMCIA && ARCH_OMAP16XX
+ help
+ Say Y here to support the CompactFlash controller on OMAP.
+ Note that this doesn't support "True IDE" mode.
+
+config BFIN_CFPCMCIA
+ tristate "Blackfin CompactFlash PCMCIA Driver"
+ depends on PCMCIA && BLACKFIN
+ help
+ Say Y here to support the CompactFlash PCMCIA driver for Blackfin.
+
+
+config AT91_CF
+ tristate "AT91 CompactFlash Controller"
+ depends on PCMCIA && ARCH_AT91RM9200
+ help
+ Say Y here to support the CompactFlash controller on AT91 chips.
+ Or choose M to compile the driver as a module named "at91_cf".
+
+config ELECTRA_CF
+ tristate "Electra CompactFlash Controller"
+ depends on PCMCIA && PPC_PASEMI
+ help
+ Say Y here to support the CompactFlash controller on the
+ PA Semi Electra eval board.
+
config PCCARD_NONSTATIC
tristate
-endif # PCCARD
+config PCCARD_IODYN
+ bool
-endmenu
+endif # PCCARD
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff