if PCCARD
-config PCMCIA_DEBUG
- bool "Enable PCCARD debugging"
- help
- Say Y here to enable PCMCIA subsystem debugging. You
- will need to choose the debugging level either via the
- kernel command line, or module options depending whether
- you build the PCMCIA as modules.
-
- The kernel command line options are:
- pcmcia_core.pc_debug=N
- pcmcia.pc_debug=N
- sa11xx_core.pc_debug=N
-
- The module option is called pc_debug=N
-
- In all the above examples, N is the debugging verbosity
- level.
-
config PCMCIA
tristate "16-bit PCMCIA support"
select CRC32
- select HAVE_IDE
default y
---help---
This option enables support for 16-bit PCMCIA cards. Most older
config PCMCIA_IOCTL
bool "PCMCIA control ioctl (obsolete)"
- depends on PCMCIA
+ depends on PCMCIA && ARM && !SMP && !PREEMPT
default y
help
If you say Y here, the deprecated ioctl interface to the PCMCIA
- subsystem will be built. It is needed by cardmgr and cardctl
- (pcmcia-cs) to function properly.
+ subsystem will be built. It is needed by the deprecated pcmcia-cs
+ tools (cardmgr, cardctl) to function properly.
You should use the new pcmciautils package instead (see
<file:Documentation/Changes> for location and details).
- If unsure, say Y.
+ This config option will most likely be removed from kernel 2.6.35,
+ the associated code from kernel 2.6.36.
+
+ As the PCMCIA ioctl is not locking safe, it depends on !SMP and
+ !PREEMPT.
+
+ If unsure, say N.
config CARDBUS
- bool "32-bit CardBus support"
+ bool "32-bit CardBus support"
depends on PCI
default y
---help---
tristate "CardBus yenta-compatible bridge support"
depends on PCI
select CARDBUS if !EMBEDDED
- select PCCARD_NONSTATIC
+ select PCCARD_NONSTATIC if PCMCIA != n
---help---
This option enables support for CardBus host bridges. Virtually
- all modern PCMCIA bridges are CardBus compatible. A "bridge" is
- the hardware inside your computer that PCMCIA cards are plugged
+ all modern PCMCIA bridges are CardBus compatible. A "bridge" is
+ the hardware inside your computer that PCMCIA cards are plugged
into.
To compile this driver as modules, choose M here: the
config PCMCIA_M8XX
tristate "MPC8xx PCMCIA support"
- depends on PCMCIA && PPC && 8xx
- select PCCARD_IODYN
- select PCCARD_NONSTATIC
+ depends on PCCARD && PPC && 8xx
+ select PCCARD_IODYN if PCMCIA != n
help
Say Y here to include support for PowerPC 8xx series PCMCIA
controller.
This driver is also available as a module called m8xx_pcmcia.
-config HD64465_PCMCIA
- tristate "HD64465 host bridge support"
- depends on HD64465 && PCMCIA
-
config PCMCIA_AU1X00
tristate "Au1x00 pcmcia support"
depends on SOC_AU1X00 && PCMCIA
+config PCMCIA_ALCHEMY_DEVBOARD
+ tristate "Alchemy Db/Pb1xxx PCMCIA socket services"
+ depends on SOC_AU1X00 && PCMCIA
+ select 64BIT_PHYS_ADDR
+ help
+ Enable this driver of you want PCMCIA support on your Alchemy
+ Db1000, Db/Pb1100, Db/Pb1500, Db/Pb1550, Db/Pb1200 board.
+ NOT suitable for the PB1000!
+
+ This driver is also available as a module called db1xxx_ss.ko
+
+config PCMCIA_XXS1500
+ tristate "MyCable XXS1500 PCMCIA socket support"
+ depends on PCMCIA && MIPS_XXS1500
+ select 64BIT_PHYS_ADDR
+ help
+ Support for the PCMCIA/CF socket interface on MyCable XXS1500
+ systems.
+
+ This driver is also available as a module called xxs1500_ss.ko
+
+config PCMCIA_BCM63XX
+ tristate "bcm63xx pcmcia support"
+ depends on BCM63XX && PCMCIA
+
+config PCMCIA_SOC_COMMON
+ tristate
+
config PCMCIA_SA1100
tristate "SA1100 support"
depends on ARM && ARCH_SA1100 && PCMCIA
- depends on ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL || MACH_ARMCORE
+ select PCMCIA_SOC_COMMON
help
Say Y here to include support for SA11x0-based PCMCIA or CF
sockets, found on HP iPAQs, Yopy, and other StrongARM(R)/
config PCMCIA_SA1111
tristate "SA1111 support"
depends on ARM && ARCH_SA1100 && SA1111 && PCMCIA
+ select PCMCIA_SOC_COMMON
help
Say Y here to include support for SA1111-based PCMCIA or CF
sockets, found on the Jornada 720, Graphicsmaster and other
config PCMCIA_PXA2XX
tristate "PXA2xx support"
depends on ARM && ARCH_PXA && PCMCIA
+ depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \
+ || MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \
+ || ARCOM_PCMCIA || ARCH_PXA_ESERIES || MACH_STARGATE2)
+ select PCMCIA_SOC_COMMON
help
Say Y here to include support for the PXA2xx PCMCIA controller
+config PCMCIA_DEBUG
+ bool "Enable debugging"
+ depends on (PCMCIA_SA1111 || PCMCIA_SA1100 || PCMCIA_PXA2XX)
+ help
+ Say Y here to enable debugging for the SoC PCMCIA layer.
+ You will need to choose the debugging level either via the
+ kernel command line, or module options depending whether
+ you build the drivers as modules.
+
+ The kernel command line options are:
+ sa11xx_core.pc_debug=N
+ pxa2xx_core.pc_debug=N
+
+ The module option is called pc_debug=N
+
+ In all the above examples, N is the debugging verbosity
+ level.
+
config PCMCIA_PROBE
bool
default y if ISA && !ARCH_SA1100 && !ARCH_CLPS711X && !PARISC
config M32R_PCC
bool "M32R PCMCIA I/F"
depends on M32R && CHIP_M32700 && PCMCIA
- select PCCARD_NONSTATIC
help
Say Y here to use the M32R PCMCIA controller.
config M32R_CFC
bool "M32R CF I/F Controller"
depends on M32R && (PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_MAPPI3 || PLAT_OPSPUT)
- select PCCARD_NONSTATIC
help
Say Y here to use the M32R CompactFlash controller.
Say Y here to support the CompactFlash controller on OMAP.
Note that this doesn't support "True IDE" mode.
+config BFIN_CFPCMCIA
+ tristate "Blackfin CompactFlash PCMCIA Driver"
+ depends on PCMCIA && BLACKFIN
+ help
+ Say Y here to support the CompactFlash PCMCIA driver for Blackfin.
+
+
config AT91_CF
tristate "AT91 CompactFlash Controller"
depends on PCMCIA && ARCH_AT91RM9200