# PCCARD (PCMCIA/CardBus) bus subsystem configuration
#
-menu "PCCARD (PCMCIA/CardBus) support"
-
-config PCCARD
+menuconfig PCCARD
tristate "PCCard (PCMCIA/CardBus) support"
- select HOTPLUG
+ depends on HOTPLUG
---help---
Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
computer. These are credit-card size devices such as network cards,
if PCCARD
-config PCMCIA_DEBUG
- bool "Enable PCCARD debugging"
- help
- Say Y here to enable PCMCIA subsystem debugging. You
- will need to choose the debugging level either via the
- kernel command line, or module options depending whether
- you build the PCMCIA as modules.
-
- The kernel command line options are:
- pcmcia_core.pc_debug=N
- pcmcia.pc_debug=N
- sa11xx_core.pc_debug=N
-
- The module option is called pc_debug=N
-
- In all the above examples, N is the debugging verbosity
- level.
-
config PCMCIA
tristate "16-bit PCMCIA support"
select CRC32
If unsure, say Y.
config CARDBUS
- bool "32-bit CardBus support"
+ bool "32-bit CardBus support"
depends on PCI
default y
---help---
select PCCARD_NONSTATIC
---help---
This option enables support for CardBus host bridges. Virtually
- all modern PCMCIA bridges are CardBus compatible. A "bridge" is
- the hardware inside your computer that PCMCIA cards are plugged
+ all modern PCMCIA bridges are CardBus compatible. A "bridge" is
+ the hardware inside your computer that PCMCIA cards are plugged
into.
To compile this driver as modules, choose M here: the
PCMCIA cards are plugged into. If unsure, say N.
config PCMCIA_M8XX
- tristate "MPC8xx PCMCIA support"
- depends on PCMCIA && PPC && 8xx
- select PCCARD_NONSTATIC
- help
- Say Y here to include support for PowerPC 8xx series PCMCIA
- controller.
-
- This driver is also available as a module called m8xx_pcmcia.
+ tristate "MPC8xx PCMCIA support"
+ depends on PCMCIA && PPC && 8xx
+ select PCCARD_IODYN
+ select PCCARD_NONSTATIC
+ help
+ Say Y here to include support for PowerPC 8xx series PCMCIA
+ controller.
-config HD64465_PCMCIA
- tristate "HD64465 host bridge support"
- depends on HD64465 && PCMCIA
+ This driver is also available as a module called m8xx_pcmcia.
config PCMCIA_AU1X00
tristate "Au1x00 pcmcia support"
depends on SOC_AU1X00 && PCMCIA
+config PCMCIA_BCM63XX
+ tristate "bcm63xx pcmcia support"
+ depends on BCM63XX && PCMCIA
+
+config PCMCIA_SOC_COMMON
+ tristate
+
config PCMCIA_SA1100
tristate "SA1100 support"
depends on ARM && ARCH_SA1100 && PCMCIA
+ select PCMCIA_SOC_COMMON
help
Say Y here to include support for SA11x0-based PCMCIA or CF
sockets, found on HP iPAQs, Yopy, and other StrongARM(R)/
config PCMCIA_SA1111
tristate "SA1111 support"
depends on ARM && ARCH_SA1100 && SA1111 && PCMCIA
+ select PCMCIA_SOC_COMMON
help
Say Y here to include support for SA1111-based PCMCIA or CF
sockets, found on the Jornada 720, Graphicsmaster and other
config PCMCIA_PXA2XX
tristate "PXA2xx support"
depends on ARM && ARCH_PXA && PCMCIA
+ depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \
+ || MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \
+ || ARCOM_PCMCIA || ARCH_PXA_ESERIES || MACH_STARGATE2)
+ select PCMCIA_SOC_COMMON
help
Say Y here to include support for the PXA2xx PCMCIA controller
+config PCMCIA_DEBUG
+ bool "Enable debugging"
+ depends on (PCMCIA_SA1111 || PCMCIA_SA1100 || PCMCIA_PXA2XX)
+ help
+ Say Y here to enable debugging for the SoC PCMCIA layer.
+ You will need to choose the debugging level either via the
+ kernel command line, or module options depending whether
+ you build the drivers as modules.
+
+ The kernel command line options are:
+ sa11xx_core.pc_debug=N
+ pxa2xx_core.pc_debug=N
+
+ The module option is called pc_debug=N
+
+ In all the above examples, N is the debugging verbosity
+ level.
+
config PCMCIA_PROBE
bool
- default y if ISA && !ARCH_SA1100 && !ARCH_CLPS711X
+ default y if ISA && !ARCH_SA1100 && !ARCH_CLPS711X && !PARISC
config M32R_PCC
bool "M32R PCMCIA I/F"
config PCMCIA_VRC4171
tristate "NEC VRC4171 Card Controllers support"
- depends on VRC4171 && PCMCIA
+ depends on CPU_VR41XX && ISA && PCMCIA
config PCMCIA_VRC4173
tristate "NEC VRC4173 CARDU support"
Say Y here to support the CompactFlash controller on OMAP.
Note that this doesn't support "True IDE" mode.
+config BFIN_CFPCMCIA
+ tristate "Blackfin CompactFlash PCMCIA Driver"
+ depends on PCMCIA && BLACKFIN
+ help
+ Say Y here to support the CompactFlash PCMCIA driver for Blackfin.
+
+
+config AT91_CF
+ tristate "AT91 CompactFlash Controller"
+ depends on PCMCIA && ARCH_AT91RM9200
+ help
+ Say Y here to support the CompactFlash controller on AT91 chips.
+ Or choose M to compile the driver as a module named "at91_cf".
+
+config ELECTRA_CF
+ tristate "Electra CompactFlash Controller"
+ depends on PCMCIA && PPC_PASEMI
+ help
+ Say Y here to support the CompactFlash controller on the
+ PA Semi Electra eval board.
+
config PCCARD_NONSTATIC
tristate
-endif # PCCARD
+config PCCARD_IODYN
+ bool
-endmenu
+endif # PCCARD