#include <linux/pci.h>
#include <linux/init.h>
#include <linux/delay.h>
+#include <linux/acpi.h>
+#include "pci.h"
/* Deal with broken BIOS'es that neglect to enable passive release,
which can cause problems in combination with the 82441FX/PPro MTRRs */
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, quirk_ich4_lpc_acpi );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, quirk_ich4_lpc_acpi );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, quirk_ich4_lpc_acpi );
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1, quirk_ich4_lpc_acpi );
/*
* VIA ACPI: One IO region pointed to by longword at
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_vt82c686_acpi );
+/*
+ * VIA VT8235 ISA Bridge: Two IO regions pointed to by words at
+ * 0x88 (128 bytes of power management registers)
+ * 0xd0 (16 bytes of SMB registers)
+ */
+static void __devinit quirk_vt8235_acpi(struct pci_dev *dev)
+{
+ u16 pm, smb;
+
+ pci_read_config_word(dev, 0x88, &pm);
+ pm &= PCI_BASE_ADDRESS_IO_MASK;
+ quirk_io_region(dev, pm, 128, PCI_BRIDGE_RESOURCES);
+
+ pci_read_config_word(dev, 0xd0, &smb);
+ smb &= PCI_BASE_ADDRESS_IO_MASK;
+ quirk_io_region(dev, smb, 16, PCI_BRIDGE_RESOURCES + 1);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_vt8235_acpi);
+
#ifdef CONFIG_X86_IO_APIC
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_ioapic );
/*
+ * VIA 8237: Some BIOSs don't set the 'Bypass APIC De-Assert Message' Bit.
+ * This leads to doubled level interrupt rates.
+ * Set this bit to get rid of cycle wastage.
+ * Otherwise uncritical.
+ */
+static void __devinit quirk_via_vt8237_bypass_apic_deassert(struct pci_dev *dev)
+{
+ u8 misc_control2;
+#define BYPASS_APIC_DEASSERT 8
+
+ pci_read_config_byte(dev, 0x5B, &misc_control2);
+ if (!(misc_control2 & BYPASS_APIC_DEASSERT)) {
+ printk(KERN_INFO "PCI: Bypassing VIA 8237 APIC De-Assert Message\n");
+ pci_write_config_byte(dev, 0x5B, misc_control2|BYPASS_APIC_DEASSERT);
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_vt8237_bypass_apic_deassert);
+
+/*
* The AMD io apic can hang the box when an apic irq is masked.
* We check all revs >= B0 (yet not in the pre production!) as the bug
* is currently marked NoFix
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_APIC, quirk_amd_8131_ioapic );
+static void __init quirk_svw_msi(struct pci_dev *dev)
+{
+ pci_msi_quirk = 1;
+ printk(KERN_WARNING "PCI: MSI quirk detected. pci_msi_quirk set.\n");
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_GCNB_LE, quirk_svw_msi );
#endif /* CONFIG_X86_IO_APIC */
/*
- * Via 686A/B: The PCI_INTERRUPT_LINE register for the on-chip
- * devices, USB0/1, AC97, MC97, and ACPI, has an unusual feature:
- * when written, it makes an internal connection to the PIC.
- * For these devices, this register is defined to be 4 bits wide.
- * Normally this is fine. However for IO-APIC motherboards, or
- * non-x86 architectures (yes Via exists on PPC among other places),
- * we must mask the PCI_INTERRUPT_LINE value versus 0xf to get
- * interrupts delivered properly.
- *
- * TODO: When we have device-specific interrupt routers,
- * quirk_via_irqpic will go away from quirks.
- */
-
-/*
* FIXME: it is questionable that quirk_via_acpi
* is needed. It shows up as an ISA bridge, and does not
* support the PCI_INTERRUPT_LINE register at all. Therefore
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_via_acpi );
/*
+ * Via 686A/B: The PCI_INTERRUPT_LINE register for the on-chip
+ * devices, USB0/1, AC97, MC97, and ACPI, has an unusual feature:
+ * when written, it makes an internal connection to the PIC.
+ * For these devices, this register is defined to be 4 bits wide.
+ * Normally this is fine. However for IO-APIC motherboards, or
+ * non-x86 architectures (yes Via exists on PPC among other places),
+ * we must mask the PCI_INTERRUPT_LINE value versus 0xf to get
+ * interrupts delivered properly.
+ */
+static void quirk_via_irq(struct pci_dev *dev)
+{
+ u8 irq, new_irq;
+
+ new_irq = dev->irq & 0xf;
+ pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
+ if (new_irq != irq) {
+ printk(KERN_INFO "PCI: Via IRQ fixup for %s, from %d to %d\n",
+ pci_name(dev), irq, new_irq);
+ udelay(15); /* unknown if delay really needed */
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq);
+ }
+}
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irq);
+
+/*
* PIIX3 USB: We have to disable USB interrupts that are
* hardwired to PIRQD# and may be shared with an
* external device.
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb );
-/*
- * VIA northbridges care about PCI_INTERRUPT_LINE
- */
-int via_interrupt_line_quirk;
-
-static void __devinit quirk_via_bridge(struct pci_dev *pdev)
-{
- if(pdev->devfn == 0) {
- printk(KERN_INFO "PCI: Via IRQ fixup\n");
- via_interrupt_line_quirk = 1;
- }
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_bridge );
/*
* Serverworks CSB5 IDE does not fully support native mode
if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK)) {
if (dev->device == PCI_DEVICE_ID_INTEL_82845_HB)
switch(dev->subsystem_device) {
+ case 0x8025: /* P4B-LX */
case 0x8070: /* P4B */
case 0x8088: /* P4B533 */
case 0x1626: /* L3C notebook */
case 0x0001: /* Toshiba Satellite A40 */
asus_hides_smbus = 1;
}
+ if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
+ switch(dev->subsystem_device) {
+ case 0x0001: /* Toshiba Tecra M2 */
+ asus_hides_smbus = 1;
+ }
} else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG)) {
if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
switch(dev->subsystem_device) {
case 0x2651:
case 0x2652:
case 0x2653:
+ case 0x2680: /* ESB2 */
ich = 6;
break;
case 0x27c0:
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH, quirk_pcie_mch );
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH, quirk_pcie_mch );
+
+/*
+ * It's possible for the MSI to get corrupted if shpc and acpi
+ * are used together on certain PXH-based systems.
+ */
+static void __devinit quirk_pcie_pxh(struct pci_dev *dev)
+{
+ disable_msi_mode(dev, pci_find_capability(dev, PCI_CAP_ID_MSI),
+ PCI_CAP_ID_MSI);
+ dev->no_msi = 1;
+
+ printk(KERN_WARNING "PCI: PXH quirk detected, "
+ "disabling MSI for SHPC device\n");
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHD_0, quirk_pcie_pxh);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHD_1, quirk_pcie_pxh);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_pcie_pxh);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_pcie_pxh);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_pcie_pxh);
+
+
static void __devinit quirk_netmos(struct pci_dev *dev)
{
unsigned int num_parallel = (dev->subsystem_device & 0xf0) >> 4;
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff