/*
- * $Id: pci.c,v 1.91 1999/01/21 13:34:01 davem Exp $
- *
* PCI Bus Services, see include/linux/pci.h for further explanation.
*
* Copyright 1993 -- 1997 Drew Eckhardt, Frederic Potter,
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/pci.h>
+#include <linux/pm.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/string.h>
+#include <linux/log2.h>
+#include <linux/pci-aspm.h>
+#include <linux/pm_wakeup.h>
#include <asm/dma.h> /* isa_dma_bridge_buggy */
#include "pci.h"
+unsigned int pci_pm_d3_delay = 10;
+
+#ifdef CONFIG_PCI_DOMAINS
+int pci_domains_supported = 1;
+#endif
+
+#define DEFAULT_CARDBUS_IO_SIZE (256)
+#define DEFAULT_CARDBUS_MEM_SIZE (64*1024*1024)
+/* pci=cbmemsize=nnM,cbiosize=nn can override this */
+unsigned long pci_cardbus_io_size = DEFAULT_CARDBUS_IO_SIZE;
+unsigned long pci_cardbus_mem_size = DEFAULT_CARDBUS_MEM_SIZE;
/**
* pci_bus_max_busnr - returns maximum PCI bus number of given bus' children
* Given a PCI bus, returns the highest PCI bus number present in the set
* including the given PCI bus and its list of child PCI buses.
*/
-unsigned char __devinit
-pci_bus_max_busnr(struct pci_bus* bus)
+unsigned char pci_bus_max_busnr(struct pci_bus* bus)
{
struct list_head *tmp;
unsigned char max, n;
#endif /* 0 */
-static int __pci_find_next_cap(struct pci_bus *bus, unsigned int devfn, u8 pos, int cap)
+#define PCI_FIND_CAP_TTL 48
+
+static int __pci_find_next_cap_ttl(struct pci_bus *bus, unsigned int devfn,
+ u8 pos, int cap, int *ttl)
{
u8 id;
- int ttl = 48;
- while (ttl--) {
+ while ((*ttl)--) {
pci_bus_read_config_byte(bus, devfn, pos, &pos);
if (pos < 0x40)
break;
return 0;
}
+static int __pci_find_next_cap(struct pci_bus *bus, unsigned int devfn,
+ u8 pos, int cap)
+{
+ int ttl = PCI_FIND_CAP_TTL;
+
+ return __pci_find_next_cap_ttl(bus, devfn, pos, cap, &ttl);
+}
+
int pci_find_next_capability(struct pci_dev *dev, u8 pos, int cap)
{
return __pci_find_next_cap(dev->bus, dev->devfn,
}
EXPORT_SYMBOL_GPL(pci_find_next_capability);
-static int __pci_bus_find_cap(struct pci_bus *bus, unsigned int devfn, u8 hdr_type, int cap)
+static int __pci_bus_find_cap_start(struct pci_bus *bus,
+ unsigned int devfn, u8 hdr_type)
{
u16 status;
- u8 pos;
pci_bus_read_config_word(bus, devfn, PCI_STATUS, &status);
if (!(status & PCI_STATUS_CAP_LIST))
switch (hdr_type) {
case PCI_HEADER_TYPE_NORMAL:
case PCI_HEADER_TYPE_BRIDGE:
- pos = PCI_CAPABILITY_LIST;
- break;
+ return PCI_CAPABILITY_LIST;
case PCI_HEADER_TYPE_CARDBUS:
- pos = PCI_CB_CAPABILITY_LIST;
- break;
+ return PCI_CB_CAPABILITY_LIST;
default:
return 0;
}
- return __pci_find_next_cap(bus, devfn, pos, cap);
+
+ return 0;
}
/**
*/
int pci_find_capability(struct pci_dev *dev, int cap)
{
- return __pci_bus_find_cap(dev->bus, dev->devfn, dev->hdr_type, cap);
+ int pos;
+
+ pos = __pci_bus_find_cap_start(dev->bus, dev->devfn, dev->hdr_type);
+ if (pos)
+ pos = __pci_find_next_cap(dev->bus, dev->devfn, pos, cap);
+
+ return pos;
}
/**
*/
int pci_bus_find_capability(struct pci_bus *bus, unsigned int devfn, int cap)
{
+ int pos;
u8 hdr_type;
pci_bus_read_config_byte(bus, devfn, PCI_HEADER_TYPE, &hdr_type);
- return __pci_bus_find_cap(bus, devfn, hdr_type & 0x7f, cap);
+ pos = __pci_bus_find_cap_start(bus, devfn, hdr_type & 0x7f);
+ if (pos)
+ pos = __pci_find_next_cap(bus, devfn, pos, cap);
+
+ return pos;
}
/**
}
EXPORT_SYMBOL_GPL(pci_find_ext_capability);
+static int __pci_find_next_ht_cap(struct pci_dev *dev, int pos, int ht_cap)
+{
+ int rc, ttl = PCI_FIND_CAP_TTL;
+ u8 cap, mask;
+
+ if (ht_cap == HT_CAPTYPE_SLAVE || ht_cap == HT_CAPTYPE_HOST)
+ mask = HT_3BIT_CAP_MASK;
+ else
+ mask = HT_5BIT_CAP_MASK;
+
+ pos = __pci_find_next_cap_ttl(dev->bus, dev->devfn, pos,
+ PCI_CAP_ID_HT, &ttl);
+ while (pos) {
+ rc = pci_read_config_byte(dev, pos + 3, &cap);
+ if (rc != PCIBIOS_SUCCESSFUL)
+ return 0;
+
+ if ((cap & mask) == ht_cap)
+ return pos;
+
+ pos = __pci_find_next_cap_ttl(dev->bus, dev->devfn,
+ pos + PCI_CAP_LIST_NEXT,
+ PCI_CAP_ID_HT, &ttl);
+ }
+
+ return 0;
+}
+/**
+ * pci_find_next_ht_capability - query a device's Hypertransport capabilities
+ * @dev: PCI device to query
+ * @pos: Position from which to continue searching
+ * @ht_cap: Hypertransport capability code
+ *
+ * To be used in conjunction with pci_find_ht_capability() to search for
+ * all capabilities matching @ht_cap. @pos should always be a value returned
+ * from pci_find_ht_capability().
+ *
+ * NB. To be 100% safe against broken PCI devices, the caller should take
+ * steps to avoid an infinite loop.
+ */
+int pci_find_next_ht_capability(struct pci_dev *dev, int pos, int ht_cap)
+{
+ return __pci_find_next_ht_cap(dev, pos + PCI_CAP_LIST_NEXT, ht_cap);
+}
+EXPORT_SYMBOL_GPL(pci_find_next_ht_capability);
+
+/**
+ * pci_find_ht_capability - query a device's Hypertransport capabilities
+ * @dev: PCI device to query
+ * @ht_cap: Hypertransport capability code
+ *
+ * Tell if a device supports a given Hypertransport capability.
+ * Returns an address within the device's PCI configuration space
+ * or 0 in case the device does not support the request capability.
+ * The address points to the PCI capability, of type PCI_CAP_ID_HT,
+ * which has a Hypertransport capability matching @ht_cap.
+ */
+int pci_find_ht_capability(struct pci_dev *dev, int ht_cap)
+{
+ int pos;
+
+ pos = __pci_bus_find_cap_start(dev->bus, dev->devfn, dev->hdr_type);
+ if (pos)
+ pos = __pci_find_next_ht_cap(dev, pos, ht_cap);
+
+ return pos;
+}
+EXPORT_SYMBOL_GPL(pci_find_ht_capability);
+
/**
* pci_find_parent_resource - return resource region of parent bus of given region
* @dev: PCI device structure contains resources to be searched
* Restore the BAR values for a given device, so as to make it
* accessible by its driver.
*/
-void
+static void
pci_restore_bars(struct pci_dev *dev)
{
int i, numres;
pci_update_resource(dev, &dev->resource[i], i);
}
-int (*platform_pci_set_power_state)(struct pci_dev *dev, pci_power_t t);
+static struct pci_platform_pm_ops *pci_platform_pm;
+
+int pci_set_platform_pm(struct pci_platform_pm_ops *ops)
+{
+ if (!ops->is_manageable || !ops->set_state || !ops->choose_state
+ || !ops->sleep_wake || !ops->can_wakeup)
+ return -EINVAL;
+ pci_platform_pm = ops;
+ return 0;
+}
+
+static inline bool platform_pci_power_manageable(struct pci_dev *dev)
+{
+ return pci_platform_pm ? pci_platform_pm->is_manageable(dev) : false;
+}
+
+static inline int platform_pci_set_power_state(struct pci_dev *dev,
+ pci_power_t t)
+{
+ return pci_platform_pm ? pci_platform_pm->set_state(dev, t) : -ENOSYS;
+}
+
+static inline pci_power_t platform_pci_choose_state(struct pci_dev *dev)
+{
+ return pci_platform_pm ?
+ pci_platform_pm->choose_state(dev) : PCI_POWER_ERROR;
+}
+
+static inline bool platform_pci_can_wakeup(struct pci_dev *dev)
+{
+ return pci_platform_pm ? pci_platform_pm->can_wakeup(dev) : false;
+}
+
+static inline int platform_pci_sleep_wake(struct pci_dev *dev, bool enable)
+{
+ return pci_platform_pm ?
+ pci_platform_pm->sleep_wake(dev, enable) : -ENODEV;
+}
/**
- * pci_set_power_state - Set the power state of a PCI device
- * @dev: PCI device to be suspended
- * @state: PCI power state (D0, D1, D2, D3hot, D3cold) we're entering
+ * pci_raw_set_power_state - Use PCI PM registers to set the power state of
+ * given PCI device
+ * @dev: PCI device to handle.
+ * @state: PCI power state (D0, D1, D2, D3hot) to put the device into.
*
- * Transition a device to a new power state, using the Power Management
- * Capabilities in the device's config space.
- *
- * RETURN VALUE:
- * -EINVAL if trying to enter a lower state than we're already in.
- * 0 if we're already in the requested state.
- * -EIO if device does not support PCI PM.
- * 0 if we can successfully change the power state.
+ * RETURN VALUE:
+ * -EINVAL if the requested state is invalid.
+ * -EIO if device does not support PCI PM or its PM capabilities register has a
+ * wrong version, or device doesn't support the requested state.
+ * 0 if device already is in the requested state.
+ * 0 if device's power state has been successfully changed.
*/
-int
-pci_set_power_state(struct pci_dev *dev, pci_power_t state)
+static int
+pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
{
- int pm, need_restore = 0;
- u16 pmcsr, pmc;
+ u16 pmcsr;
+ bool need_restore = false;
- /* bound the state we're entering */
- if (state > PCI_D3hot)
- state = PCI_D3hot;
+ if (!dev->pm_cap)
+ return -EIO;
+
+ if (state < PCI_D0 || state > PCI_D3hot)
+ return -EINVAL;
/* Validate current state:
* Can enter D0 from any state, but if we can only go deeper
* to sleep if we're already in a low power state
*/
- if (state != PCI_D0 && dev->current_state > state) {
- printk(KERN_ERR "%s(): %s: state=%d, current state=%d\n",
- __FUNCTION__, pci_name(dev), state, dev->current_state);
+ if (dev->current_state == state) {
+ /* we're already there */
+ return 0;
+ } else if (state != PCI_D0 && dev->current_state <= PCI_D3cold
+ && dev->current_state > state) {
+ dev_err(&dev->dev, "invalid power transition "
+ "(from state %d to %d)\n", dev->current_state, state);
return -EINVAL;
- } else if (dev->current_state == state)
- return 0; /* we're already there */
-
- /* find PCI PM capability in list */
- pm = pci_find_capability(dev, PCI_CAP_ID_PM);
-
- /* abort if the device doesn't support PM capabilities */
- if (!pm)
- return -EIO;
-
- pci_read_config_word(dev,pm + PCI_PM_PMC,&pmc);
- if ((pmc & PCI_PM_CAP_VER_MASK) > 3) {
- printk(KERN_DEBUG
- "PCI: %s has unsupported PM cap regs version (%u)\n",
- pci_name(dev), pmc & PCI_PM_CAP_VER_MASK);
- return -EIO;
}
/* check if this device supports the desired state */
- if (state == PCI_D1 && !(pmc & PCI_PM_CAP_D1))
- return -EIO;
- else if (state == PCI_D2 && !(pmc & PCI_PM_CAP_D2))
+ if ((state == PCI_D1 && !dev->d1_support)
+ || (state == PCI_D2 && !dev->d2_support))
return -EIO;
- pci_read_config_word(dev, pm + PCI_PM_CTRL, &pmcsr);
+ pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
/* If we're (effectively) in D3, force entire word to 0.
* This doesn't affect PME_Status, disables PME_En, and
case PCI_UNKNOWN: /* Boot-up */
if ((pmcsr & PCI_PM_CTRL_STATE_MASK) == PCI_D3hot
&& !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET))
- need_restore = 1;
+ need_restore = true;
/* Fall-through: force to D0 */
default:
pmcsr = 0;
}
/* enter specified state */
- pci_write_config_word(dev, pm + PCI_PM_CTRL, pmcsr);
+ pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr);
/* Mandatory power management transition delays */
/* see PCI PM 1.1 5.6.1 table 18 */
if (state == PCI_D3hot || dev->current_state == PCI_D3hot)
- msleep(10);
+ msleep(pci_pm_d3_delay);
else if (state == PCI_D2 || dev->current_state == PCI_D2)
udelay(200);
- /*
- * Give firmware a chance to be called, such as ACPI _PRx, _PSx
- * Firmware method after native method ?
- */
- if (platform_pci_set_power_state)
- platform_pci_set_power_state(dev, state);
-
dev->current_state = state;
/* According to section 5.4.1 of the "PCI BUS POWER MANAGEMENT
if (need_restore)
pci_restore_bars(dev);
+ if (dev->bus->self)
+ pcie_aspm_pm_state_change(dev->bus->self);
+
return 0;
}
-int (*platform_pci_choose_state)(struct pci_dev *dev, pm_message_t state);
-
+/**
+ * pci_update_current_state - Read PCI power state of given device from its
+ * PCI PM registers and cache it
+ * @dev: PCI device to handle.
+ */
+static void pci_update_current_state(struct pci_dev *dev)
+{
+ if (dev->pm_cap) {
+ u16 pmcsr;
+
+ pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
+ dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK);
+ }
+}
+
+/**
+ * pci_set_power_state - Set the power state of a PCI device
+ * @dev: PCI device to handle.
+ * @state: PCI power state (D0, D1, D2, D3hot) to put the device into.
+ *
+ * Transition a device to a new power state, using the platform formware and/or
+ * the device's PCI PM registers.
+ *
+ * RETURN VALUE:
+ * -EINVAL if the requested state is invalid.
+ * -EIO if device does not support PCI PM or its PM capabilities register has a
+ * wrong version, or device doesn't support the requested state.
+ * 0 if device already is in the requested state.
+ * 0 if device's power state has been successfully changed.
+ */
+int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
+{
+ int error;
+
+ /* bound the state we're entering */
+ if (state > PCI_D3hot)
+ state = PCI_D3hot;
+ else if (state < PCI_D0)
+ state = PCI_D0;
+ else if ((state == PCI_D1 || state == PCI_D2) && pci_no_d1d2(dev))
+ /*
+ * If the device or the parent bridge do not support PCI PM,
+ * ignore the request if we're doing anything other than putting
+ * it into D0 (which would only happen on boot).
+ */
+ return 0;
+
+ if (state == PCI_D0 && platform_pci_power_manageable(dev)) {
+ /*
+ * Allow the platform to change the state, for example via ACPI
+ * _PR0, _PS0 and some such, but do not trust it.
+ */
+ int ret = platform_pci_set_power_state(dev, PCI_D0);
+ if (!ret)
+ pci_update_current_state(dev);
+ }
+
+ error = pci_raw_set_power_state(dev, state);
+
+ if (state > PCI_D0 && platform_pci_power_manageable(dev)) {
+ /* Allow the platform to finalize the transition */
+ int ret = platform_pci_set_power_state(dev, state);
+ if (!ret) {
+ pci_update_current_state(dev);
+ error = 0;
+ }
+ }
+
+ return error;
+}
+
/**
* pci_choose_state - Choose the power state of a PCI device
* @dev: PCI device to be suspended
pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state)
{
- int ret;
+ pci_power_t ret;
if (!pci_find_capability(dev, PCI_CAP_ID_PM))
return PCI_D0;
- if (platform_pci_choose_state) {
- ret = platform_pci_choose_state(dev, state);
- if (ret >= 0)
- state.event = ret;
- }
+ ret = platform_pci_choose_state(dev);
+ if (ret != PCI_POWER_ERROR)
+ return ret;
switch (state.event) {
case PM_EVENT_ON:
return PCI_D0;
case PM_EVENT_FREEZE:
+ case PM_EVENT_PRETHAW:
+ /* REVISIT both freeze and pre-thaw "should" use D0 */
case PM_EVENT_SUSPEND:
+ case PM_EVENT_HIBERNATE:
return PCI_D3hot;
default:
- printk("They asked me for state %d\n", state.event);
+ dev_info(&dev->dev, "unrecognized suspend event %d\n",
+ state.event);
BUG();
}
return PCI_D0;
EXPORT_SYMBOL(pci_choose_state);
+static int pci_save_pcie_state(struct pci_dev *dev)
+{
+ int pos, i = 0;
+ struct pci_cap_saved_state *save_state;
+ u16 *cap;
+ int found = 0;
+
+ pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
+ if (pos <= 0)
+ return 0;
+
+ save_state = pci_find_saved_cap(dev, PCI_CAP_ID_EXP);
+ if (!save_state)
+ save_state = kzalloc(sizeof(*save_state) + sizeof(u16) * 4, GFP_KERNEL);
+ else
+ found = 1;
+ if (!save_state) {
+ dev_err(&dev->dev, "out of memory in pci_save_pcie_state\n");
+ return -ENOMEM;
+ }
+ cap = (u16 *)&save_state->data[0];
+
+ pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &cap[i++]);
+ pci_read_config_word(dev, pos + PCI_EXP_LNKCTL, &cap[i++]);
+ pci_read_config_word(dev, pos + PCI_EXP_SLTCTL, &cap[i++]);
+ pci_read_config_word(dev, pos + PCI_EXP_RTCTL, &cap[i++]);
+ save_state->cap_nr = PCI_CAP_ID_EXP;
+ if (!found)
+ pci_add_saved_cap(dev, save_state);
+ return 0;
+}
+
+static void pci_restore_pcie_state(struct pci_dev *dev)
+{
+ int i = 0, pos;
+ struct pci_cap_saved_state *save_state;
+ u16 *cap;
+
+ save_state = pci_find_saved_cap(dev, PCI_CAP_ID_EXP);
+ pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
+ if (!save_state || pos <= 0)
+ return;
+ cap = (u16 *)&save_state->data[0];
+
+ pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, cap[i++]);
+ pci_write_config_word(dev, pos + PCI_EXP_LNKCTL, cap[i++]);
+ pci_write_config_word(dev, pos + PCI_EXP_SLTCTL, cap[i++]);
+ pci_write_config_word(dev, pos + PCI_EXP_RTCTL, cap[i++]);
+}
+
+
+static int pci_save_pcix_state(struct pci_dev *dev)
+{
+ int pos, i = 0;
+ struct pci_cap_saved_state *save_state;
+ u16 *cap;
+ int found = 0;
+
+ pos = pci_find_capability(dev, PCI_CAP_ID_PCIX);
+ if (pos <= 0)
+ return 0;
+
+ save_state = pci_find_saved_cap(dev, PCI_CAP_ID_PCIX);
+ if (!save_state)
+ save_state = kzalloc(sizeof(*save_state) + sizeof(u16), GFP_KERNEL);
+ else
+ found = 1;
+ if (!save_state) {
+ dev_err(&dev->dev, "out of memory in pci_save_pcie_state\n");
+ return -ENOMEM;
+ }
+ cap = (u16 *)&save_state->data[0];
+
+ pci_read_config_word(dev, pos + PCI_X_CMD, &cap[i++]);
+ save_state->cap_nr = PCI_CAP_ID_PCIX;
+ if (!found)
+ pci_add_saved_cap(dev, save_state);
+ return 0;
+}
+
+static void pci_restore_pcix_state(struct pci_dev *dev)
+{
+ int i = 0, pos;
+ struct pci_cap_saved_state *save_state;
+ u16 *cap;
+
+ save_state = pci_find_saved_cap(dev, PCI_CAP_ID_PCIX);
+ pos = pci_find_capability(dev, PCI_CAP_ID_PCIX);
+ if (!save_state || pos <= 0)
+ return;
+ cap = (u16 *)&save_state->data[0];
+
+ pci_write_config_word(dev, pos + PCI_X_CMD, cap[i++]);
+}
+
+
/**
* pci_save_state - save the PCI configuration space of a device before suspending
* @dev: - PCI device that we're dealing with
/* XXX: 100% dword access ok here? */
for (i = 0; i < 16; i++)
pci_read_config_dword(dev, i * 4,&dev->saved_config_space[i]);
- if ((i = pci_save_msi_state(dev)) != 0)
+ if ((i = pci_save_pcie_state(dev)) != 0)
return i;
- if ((i = pci_save_msix_state(dev)) != 0)
+ if ((i = pci_save_pcix_state(dev)) != 0)
return i;
return 0;
}
pci_restore_state(struct pci_dev *dev)
{
int i;
- int val;
+ u32 val;
+
+ /* PCI Express register must be restored first */
+ pci_restore_pcie_state(dev);
/*
* The Base Address register should be programmed before the command
for (i = 15; i >= 0; i--) {
pci_read_config_dword(dev, i * 4, &val);
if (val != dev->saved_config_space[i]) {
- printk(KERN_DEBUG "PM: Writing back config space on "
- "device %s at offset %x (was %x, writing %x)\n",
- pci_name(dev), i,
- val, (int)dev->saved_config_space[i]);
+ dev_printk(KERN_DEBUG, &dev->dev, "restoring config "
+ "space at offset %#x (was %#x, writing %#x)\n",
+ i, val, (int)dev->saved_config_space[i]);
pci_write_config_dword(dev,i * 4,
dev->saved_config_space[i]);
}
}
+ pci_restore_pcix_state(dev);
pci_restore_msi_state(dev);
- pci_restore_msix_state(dev);
+
return 0;
}
-/**
- * pci_enable_device_bars - Initialize some of a device for use
- * @dev: PCI device to be initialized
- * @bars: bitmask of BAR's that must be configured
- *
- * Initialize device before it's used by a driver. Ask low-level code
- * to enable selected I/O and memory resources. Wake up the device if it
- * was suspended. Beware, this function can fail.
- */
-
-int
-pci_enable_device_bars(struct pci_dev *dev, int bars)
+static int do_pci_enable_device(struct pci_dev *dev, int bars)
{
int err;
err = pcibios_enable_device(dev, bars);
if (err < 0)
return err;
+ pci_fixup_device(pci_fixup_enable, dev);
+
return 0;
}
/**
+ * pci_reenable_device - Resume abandoned device
+ * @dev: PCI device to be resumed
+ *
+ * Note this function is a backend of pci_default_resume and is not supposed
+ * to be called by normal code, write proper resume handler and use it instead.
+ */
+int pci_reenable_device(struct pci_dev *dev)
+{
+ if (atomic_read(&dev->enable_cnt))
+ return do_pci_enable_device(dev, (1 << PCI_NUM_RESOURCES) - 1);
+ return 0;
+}
+
+static int __pci_enable_device_flags(struct pci_dev *dev,
+ resource_size_t flags)
+{
+ int err;
+ int i, bars = 0;
+
+ if (atomic_add_return(1, &dev->enable_cnt) > 1)
+ return 0; /* already enabled */
+
+ for (i = 0; i < DEVICE_COUNT_RESOURCE; i++)
+ if (dev->resource[i].flags & flags)
+ bars |= (1 << i);
+
+ err = do_pci_enable_device(dev, bars);
+ if (err < 0)
+ atomic_dec(&dev->enable_cnt);
+ return err;
+}
+
+/**
+ * pci_enable_device_io - Initialize a device for use with IO space
+ * @dev: PCI device to be initialized
+ *
+ * Initialize device before it's used by a driver. Ask low-level code
+ * to enable I/O resources. Wake up the device if it was suspended.
+ * Beware, this function can fail.
+ */
+int pci_enable_device_io(struct pci_dev *dev)
+{
+ return __pci_enable_device_flags(dev, IORESOURCE_IO);
+}
+
+/**
+ * pci_enable_device_mem - Initialize a device for use with Memory space
+ * @dev: PCI device to be initialized
+ *
+ * Initialize device before it's used by a driver. Ask low-level code
+ * to enable Memory resources. Wake up the device if it was suspended.
+ * Beware, this function can fail.
+ */
+int pci_enable_device_mem(struct pci_dev *dev)
+{
+ return __pci_enable_device_flags(dev, IORESOURCE_MEM);
+}
+
+/**
* pci_enable_device - Initialize device before it's used by a driver.
* @dev: PCI device to be initialized
*
* Initialize device before it's used by a driver. Ask low-level code
* to enable I/O and memory. Wake up the device if it was suspended.
* Beware, this function can fail.
+ *
+ * Note we don't actually enable the device many times if we call
+ * this function repeatedly (we just increment the count).
*/
-int
-pci_enable_device(struct pci_dev *dev)
+int pci_enable_device(struct pci_dev *dev)
{
- int err;
+ return __pci_enable_device_flags(dev, IORESOURCE_MEM | IORESOURCE_IO);
+}
+
+/*
+ * Managed PCI resources. This manages device on/off, intx/msi/msix
+ * on/off and BAR regions. pci_dev itself records msi/msix status, so
+ * there's no need to track it separately. pci_devres is initialized
+ * when a device is enabled using managed PCI device enable interface.
+ */
+struct pci_devres {
+ unsigned int enabled:1;
+ unsigned int pinned:1;
+ unsigned int orig_intx:1;
+ unsigned int restore_intx:1;
+ u32 region_mask;
+};
+
+static void pcim_release(struct device *gendev, void *res)
+{
+ struct pci_dev *dev = container_of(gendev, struct pci_dev, dev);
+ struct pci_devres *this = res;
+ int i;
+
+ if (dev->msi_enabled)
+ pci_disable_msi(dev);
+ if (dev->msix_enabled)
+ pci_disable_msix(dev);
+
+ for (i = 0; i < DEVICE_COUNT_RESOURCE; i++)
+ if (this->region_mask & (1 << i))
+ pci_release_region(dev, i);
+
+ if (this->restore_intx)
+ pci_intx(dev, this->orig_intx);
+
+ if (this->enabled && !this->pinned)
+ pci_disable_device(dev);
+}
+
+static struct pci_devres * get_pci_dr(struct pci_dev *pdev)
+{
+ struct pci_devres *dr, *new_dr;
+
+ dr = devres_find(&pdev->dev, pcim_release, NULL, NULL);
+ if (dr)
+ return dr;
+
+ new_dr = devres_alloc(pcim_release, sizeof(*new_dr), GFP_KERNEL);
+ if (!new_dr)
+ return NULL;
+ return devres_get(&pdev->dev, new_dr, NULL, NULL);
+}
+
+static struct pci_devres * find_pci_dr(struct pci_dev *pdev)
+{
+ if (pci_is_managed(pdev))
+ return devres_find(&pdev->dev, pcim_release, NULL, NULL);
+ return NULL;
+}
+
+/**
+ * pcim_enable_device - Managed pci_enable_device()
+ * @pdev: PCI device to be initialized
+ *
+ * Managed pci_enable_device().
+ */
+int pcim_enable_device(struct pci_dev *pdev)
+{
+ struct pci_devres *dr;
+ int rc;
- if (dev->is_enabled)
+ dr = get_pci_dr(pdev);
+ if (unlikely(!dr))
+ return -ENOMEM;
+ if (dr->enabled)
return 0;
- err = pci_enable_device_bars(dev, (1 << PCI_NUM_RESOURCES) - 1);
- if (err)
- return err;
- pci_fixup_device(pci_fixup_enable, dev);
- dev->is_enabled = 1;
- return 0;
+ rc = pci_enable_device(pdev);
+ if (!rc) {
+ pdev->is_managed = 1;
+ dr->enabled = 1;
+ }
+ return rc;
+}
+
+/**
+ * pcim_pin_device - Pin managed PCI device
+ * @pdev: PCI device to pin
+ *
+ * Pin managed PCI device @pdev. Pinned device won't be disabled on
+ * driver detach. @pdev must have been enabled with
+ * pcim_enable_device().
+ */
+void pcim_pin_device(struct pci_dev *pdev)
+{
+ struct pci_devres *dr;
+
+ dr = find_pci_dr(pdev);
+ WARN_ON(!dr || !dr->enabled);
+ if (dr)
+ dr->pinned = 1;
}
/**
*
* Signal to the system that the PCI device is not in use by the system
* anymore. This only involves disabling PCI bus-mastering, if active.
+ *
+ * Note we don't actually disable the device until all callers of
+ * pci_device_enable() have called pci_device_disable().
*/
void
pci_disable_device(struct pci_dev *dev)
{
+ struct pci_devres *dr;
u16 pci_command;
- if (dev->msi_enabled)
- disable_msi_mode(dev, pci_find_capability(dev, PCI_CAP_ID_MSI),
- PCI_CAP_ID_MSI);
- if (dev->msix_enabled)
- disable_msi_mode(dev, pci_find_capability(dev, PCI_CAP_ID_MSI),
- PCI_CAP_ID_MSIX);
+ dr = find_pci_dr(dev);
+ if (dr)
+ dr->enabled = 0;
+
+ if (atomic_sub_return(1, &dev->enable_cnt) != 0)
+ return;
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
dev->is_busmaster = 0;
pcibios_disable_device(dev);
- dev->is_enabled = 0;
}
/**
- * pci_enable_wake - enable device to generate PME# when suspended
- * @dev: - PCI device to operate on
- * @state: - Current state of device.
- * @enable: - Flag to enable or disable generation
- *
- * Set the bits in the device's PM Capabilities to generate PME# when
- * the system is suspended.
+ * pcibios_set_pcie_reset_state - set reset state for device dev
+ * @dev: the PCI-E device reset
+ * @state: Reset state to enter into
+ *
+ *
+ * Sets the PCI-E reset state for the device. This is the default
+ * implementation. Architecture implementations can override this.
+ */
+int __attribute__ ((weak)) pcibios_set_pcie_reset_state(struct pci_dev *dev,
+ enum pcie_reset_state state)
+{
+ return -EINVAL;
+}
+
+/**
+ * pci_set_pcie_reset_state - set reset state for device dev
+ * @dev: the PCI-E device reset
+ * @state: Reset state to enter into
+ *
+ *
+ * Sets the PCI reset state for the device.
+ */
+int pci_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state)
+{
+ return pcibios_set_pcie_reset_state(dev, state);
+}
+
+/**
+ * pci_pme_capable - check the capability of PCI device to generate PME#
+ * @dev: PCI device to handle.
+ * @state: PCI state from which device will issue PME#.
+ */
+bool pci_pme_capable(struct pci_dev *dev, pci_power_t state)
+{
+ if (!dev->pm_cap)
+ return false;
+
+ return !!(dev->pme_support & (1 << state));
+}
+
+/**
+ * pci_pme_active - enable or disable PCI device's PME# function
+ * @dev: PCI device to handle.
+ * @enable: 'true' to enable PME# generation; 'false' to disable it.
+ *
+ * The caller must verify that the device is capable of generating PME# before
+ * calling this function with @enable equal to 'true'.
+ */
+static void pci_pme_active(struct pci_dev *dev, bool enable)
+{
+ u16 pmcsr;
+
+ if (!dev->pm_cap)
+ return;
+
+ pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
+ /* Clear PME_Status by writing 1 to it and enable PME# */
+ pmcsr |= PCI_PM_CTRL_PME_STATUS | PCI_PM_CTRL_PME_ENABLE;
+ if (!enable)
+ pmcsr &= ~PCI_PM_CTRL_PME_ENABLE;
+
+ pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr);
+
+ dev_printk(KERN_INFO, &dev->dev, "PME# %s\n",
+ enable ? "enabled" : "disabled");
+}
+
+/**
+ * pci_enable_wake - enable PCI device as wakeup event source
+ * @dev: PCI device affected
+ * @state: PCI state from which device will issue wakeup events
+ * @enable: True to enable event generation; false to disable
+ *
+ * This enables the device as a wakeup event source, or disables it.
+ * When such events involves platform-specific hooks, those hooks are
+ * called automatically by this routine.
*
- * -EIO is returned if device doesn't have PM Capabilities.
- * -EINVAL is returned if device supports it, but can't generate wake events.
- * 0 if operation is successful.
- *
+ * Devices with legacy power management (no standard PCI PM capabilities)
+ * always require such platform hooks.
+ *
+ * RETURN VALUE:
+ * 0 is returned on success
+ * -EINVAL is returned if device is not supposed to wake up the system
+ * Error code depending on the platform is returned if both the platform and
+ * the native mechanism fail to enable the generation of wake-up events
*/
int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable)
{
- int pm;
- u16 value;
+ int error = 0;
+ bool pme_done = false;
- /* find PCI PM capability in list */
- pm = pci_find_capability(dev, PCI_CAP_ID_PM);
+ if (!device_may_wakeup(&dev->dev))
+ return -EINVAL;
- /* If device doesn't support PM Capabilities, but request is to disable
- * wake events, it's a nop; otherwise fail */
- if (!pm)
- return enable ? -EIO : 0;
+ /*
+ * According to "PCI System Architecture" 4th ed. by Tom Shanley & Don
+ * Anderson we should be doing PME# wake enable followed by ACPI wake
+ * enable. To disable wake-up we call the platform first, for symmetry.
+ */
- /* Check device's ability to generate PME# */
- pci_read_config_word(dev,pm+PCI_PM_PMC,&value);
+ if (!enable && platform_pci_can_wakeup(dev))
+ error = platform_pci_sleep_wake(dev, false);
- value &= PCI_PM_CAP_PME_MASK;
- value >>= ffs(PCI_PM_CAP_PME_MASK) - 1; /* First bit of mask */
+ if (!enable || pci_pme_capable(dev, state)) {
+ pci_pme_active(dev, enable);
+ pme_done = true;
+ }
- /* Check if it can generate PME# from requested state. */
- if (!value || !(value & (1 << state)))
- return enable ? -EINVAL : 0;
+ if (enable && platform_pci_can_wakeup(dev))
+ error = platform_pci_sleep_wake(dev, true);
- pci_read_config_word(dev, pm + PCI_PM_CTRL, &value);
+ return pme_done ? 0 : error;
+}
- /* Clear PME_Status by writing 1 to it and enable PME# */
- value |= PCI_PM_CTRL_PME_STATUS | PCI_PM_CTRL_PME_ENABLE;
+/**
+ */
+pci_power_t pci_target_state(struct pci_dev *dev)
+{
+ pci_power_t target_state = PCI_D3hot;
+
+ if (platform_pci_power_manageable(dev)) {
+ /*
+ * Call the platform to choose the target state of the device
+ * and enable wake-up from this state if supported.
+ */
+ pci_power_t state = platform_pci_choose_state(dev);
+
+ switch (state) {
+ case PCI_POWER_ERROR:
+ case PCI_UNKNOWN:
+ break;
+ case PCI_D1:
+ case PCI_D2:
+ if (pci_no_d1d2(dev))
+ break;
+ default:
+ target_state = state;
+ }
+ } else if (device_may_wakeup(&dev->dev)) {
+ /*
+ * Find the deepest state from which the device can generate
+ * wake-up events, make it the target state and enable device
+ * to generate PME#.
+ */
+ if (!dev->pm_cap)
+ return PCI_POWER_ERROR;
+
+ if (dev->pme_support) {
+ while (target_state
+ && !(dev->pme_support & (1 << target_state)))
+ target_state--;
+ }
+ }
- if (!enable)
- value &= ~PCI_PM_CTRL_PME_ENABLE;
+ return target_state;
+}
- pci_write_config_word(dev, pm + PCI_PM_CTRL, value);
-
- return 0;
+/**
+ * pci_prepare_to_sleep - prepare PCI device for system-wide transition into a sleep state
+ * @dev: Device to handle.
+ *
+ * Choose the power state appropriate for the device depending on whether
+ * it can wake up the system and/or is power manageable by the platform
+ * (PCI_D3hot is the default) and put the device into that state.
+ */
+int pci_prepare_to_sleep(struct pci_dev *dev)
+{
+ pci_power_t target_state = pci_target_state(dev);
+ int error;
+
+ if (target_state == PCI_POWER_ERROR)
+ return -EIO;
+
+ pci_enable_wake(dev, target_state, true);
+
+ error = pci_set_power_state(dev, target_state);
+
+ if (error)
+ pci_enable_wake(dev, target_state, false);
+
+ return error;
+}
+
+/**
+ * pci_back_from_sleep - turn PCI device on during system-wide transition into working state
+ * @dev: Device to handle.
+ *
+ * Disable device's sytem wake-up capability and put it into D0.
+ */
+int pci_back_from_sleep(struct pci_dev *dev)
+{
+ pci_enable_wake(dev, PCI_D0, false);
+ return pci_set_power_state(dev, PCI_D0);
+}
+
+/**
+ * pci_pm_init - Initialize PM functions of given PCI device
+ * @dev: PCI device to handle.
+ */
+void pci_pm_init(struct pci_dev *dev)
+{
+ int pm;
+ u16 pmc;
+
+ dev->pm_cap = 0;
+
+ /* find PCI PM capability in list */
+ pm = pci_find_capability(dev, PCI_CAP_ID_PM);
+ if (!pm)
+ return;
+ /* Check device's ability to generate PME# */
+ pci_read_config_word(dev, pm + PCI_PM_PMC, &pmc);
+
+ if ((pmc & PCI_PM_CAP_VER_MASK) > 3) {
+ dev_err(&dev->dev, "unsupported PM cap regs version (%u)\n",
+ pmc & PCI_PM_CAP_VER_MASK);
+ return;
+ }
+
+ dev->pm_cap = pm;
+
+ dev->d1_support = false;
+ dev->d2_support = false;
+ if (!pci_no_d1d2(dev)) {
+ if (pmc & PCI_PM_CAP_D1) {
+ dev_printk(KERN_DEBUG, &dev->dev, "supports D1\n");
+ dev->d1_support = true;
+ }
+ if (pmc & PCI_PM_CAP_D2) {
+ dev_printk(KERN_DEBUG, &dev->dev, "supports D2\n");
+ dev->d2_support = true;
+ }
+ }
+
+ pmc &= PCI_PM_CAP_PME_MASK;
+ if (pmc) {
+ dev_printk(KERN_INFO, &dev->dev,
+ "PME# supported from%s%s%s%s%s\n",
+ (pmc & PCI_PM_CAP_PME_D0) ? " D0" : "",
+ (pmc & PCI_PM_CAP_PME_D1) ? " D1" : "",
+ (pmc & PCI_PM_CAP_PME_D2) ? " D2" : "",
+ (pmc & PCI_PM_CAP_PME_D3) ? " D3hot" : "",
+ (pmc & PCI_PM_CAP_PME_D3cold) ? " D3cold" : "");
+ dev->pme_support = pmc >> PCI_PM_CAP_PME_SHIFT;
+ /*
+ * Make device's PM flags reflect the wake-up capability, but
+ * let the user space enable it to wake up the system as needed.
+ */
+ device_set_wakeup_capable(&dev->dev, true);
+ device_set_wakeup_enable(&dev->dev, false);
+ /* Disable the PME# generation functionality */
+ pci_pme_active(dev, false);
+ } else {
+ dev->pme_support = 0;
+ }
}
int
*/
void pci_release_region(struct pci_dev *pdev, int bar)
{
+ struct pci_devres *dr;
+
if (pci_resource_len(pdev, bar) == 0)
return;
if (pci_resource_flags(pdev, bar) & IORESOURCE_IO)
else if (pci_resource_flags(pdev, bar) & IORESOURCE_MEM)
release_mem_region(pci_resource_start(pdev, bar),
pci_resource_len(pdev, bar));
+
+ dr = find_pci_dr(pdev);
+ if (dr)
+ dr->region_mask &= ~(1 << bar);
}
/**
*/
int pci_request_region(struct pci_dev *pdev, int bar, const char *res_name)
{
+ struct pci_devres *dr;
+
if (pci_resource_len(pdev, bar) == 0)
return 0;
pci_resource_len(pdev, bar), res_name))
goto err_out;
}
-
+
+ dr = find_pci_dr(pdev);
+ if (dr)
+ dr->region_mask |= 1 << bar;
+
return 0;
err_out:
- printk (KERN_WARNING "PCI: Unable to reserve %s region #%d:%llx@%llx "
- "for device %s\n",
- pci_resource_flags(pdev, bar) & IORESOURCE_IO ? "I/O" : "mem",
- bar + 1, /* PCI BAR # */
- (unsigned long long)pci_resource_len(pdev, bar),
- (unsigned long long)pci_resource_start(pdev, bar),
- pci_name(pdev));
+ dev_warn(&pdev->dev, "BAR %d: can't reserve %s region [%#llx-%#llx]\n",
+ bar,
+ pci_resource_flags(pdev, bar) & IORESOURCE_IO ? "I/O" : "mem",
+ (unsigned long long)pci_resource_start(pdev, bar),
+ (unsigned long long)pci_resource_end(pdev, bar));
return -EBUSY;
}
+/**
+ * pci_release_selected_regions - Release selected PCI I/O and memory resources
+ * @pdev: PCI device whose resources were previously reserved
+ * @bars: Bitmask of BARs to be released
+ *
+ * Release selected PCI I/O and memory resources previously reserved.
+ * Call this function only after all use of the PCI regions has ceased.
+ */
+void pci_release_selected_regions(struct pci_dev *pdev, int bars)
+{
+ int i;
+
+ for (i = 0; i < 6; i++)
+ if (bars & (1 << i))
+ pci_release_region(pdev, i);
+}
+
+/**
+ * pci_request_selected_regions - Reserve selected PCI I/O and memory resources
+ * @pdev: PCI device whose resources are to be reserved
+ * @bars: Bitmask of BARs to be requested
+ * @res_name: Name to be associated with resource
+ */
+int pci_request_selected_regions(struct pci_dev *pdev, int bars,
+ const char *res_name)
+{
+ int i;
+
+ for (i = 0; i < 6; i++)
+ if (bars & (1 << i))
+ if(pci_request_region(pdev, i, res_name))
+ goto err_out;
+ return 0;
+
+err_out:
+ while(--i >= 0)
+ if (bars & (1 << i))
+ pci_release_region(pdev, i);
+
+ return -EBUSY;
+}
/**
* pci_release_regions - Release reserved PCI I/O and memory resources
void pci_release_regions(struct pci_dev *pdev)
{
- int i;
-
- for (i = 0; i < 6; i++)
- pci_release_region(pdev, i);
+ pci_release_selected_regions(pdev, (1 << 6) - 1);
}
/**
*/
int pci_request_regions(struct pci_dev *pdev, const char *res_name)
{
- int i;
-
- for (i = 0; i < 6; i++)
- if(pci_request_region(pdev, i, res_name))
- goto err_out;
- return 0;
-
-err_out:
- while(--i >= 0)
- pci_release_region(pdev, i);
-
- return -EBUSY;
+ return pci_request_selected_regions(pdev, ((1 << 6) - 1), res_name);
}
/**
pci_read_config_word(dev, PCI_COMMAND, &cmd);
if (! (cmd & PCI_COMMAND_MASTER)) {
- pr_debug("PCI: Enabling bus mastering for device %s\n", pci_name(dev));
+ dev_dbg(&dev->dev, "enabling bus mastering\n");
cmd |= PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, cmd);
}
pcibios_set_master(dev);
}
-#ifndef HAVE_ARCH_PCI_MWI
+#ifdef PCI_DISABLE_MWI
+int pci_set_mwi(struct pci_dev *dev)
+{
+ return 0;
+}
+
+int pci_try_set_mwi(struct pci_dev *dev)
+{
+ return 0;
+}
+
+void pci_clear_mwi(struct pci_dev *dev)
+{
+}
+
+#else
+
+#ifndef PCI_CACHE_LINE_BYTES
+#define PCI_CACHE_LINE_BYTES L1_CACHE_BYTES
+#endif
+
/* This can be overridden by arch code. */
-u8 pci_cache_line_size = L1_CACHE_BYTES >> 2;
+/* Don't forget this is measured in 32-bit words, not bytes */
+u8 pci_cache_line_size = PCI_CACHE_LINE_BYTES / 4;
/**
- * pci_generic_prep_mwi - helper function for pci_set_mwi
- * @dev: the PCI device for which MWI is enabled
+ * pci_set_cacheline_size - ensure the CACHE_LINE_SIZE register is programmed
+ * @dev: the PCI device for which MWI is to be enabled
*
- * Helper function for generic implementation of pcibios_prep_mwi
- * function. Originally copied from drivers/net/acenic.c.
+ * Helper function for pci_set_mwi.
+ * Originally copied from drivers/net/acenic.c.
* Copyright 1998-2001 by Jes Sorensen, <jes@trained-monkey.org>.
*
* RETURNS: An appropriate -ERRNO error value on error, or zero for success.
*/
static int
-pci_generic_prep_mwi(struct pci_dev *dev)
+pci_set_cacheline_size(struct pci_dev *dev)
{
u8 cacheline_size;
if (cacheline_size == pci_cache_line_size)
return 0;
- printk(KERN_DEBUG "PCI: cache line size of %d is not supported "
- "by device %s\n", pci_cache_line_size << 2, pci_name(dev));
+ dev_printk(KERN_DEBUG, &dev->dev, "cache line size of %d is not "
+ "supported\n", pci_cache_line_size << 2);
return -EINVAL;
}
-#endif /* !HAVE_ARCH_PCI_MWI */
/**
* pci_set_mwi - enables memory-write-invalidate PCI transaction
* @dev: the PCI device for which MWI is enabled
*
- * Enables the Memory-Write-Invalidate transaction in %PCI_COMMAND,
- * and then calls @pcibios_set_mwi to do the needed arch specific
- * operations or a generic mwi-prep function.
+ * Enables the Memory-Write-Invalidate transaction in %PCI_COMMAND.
*
* RETURNS: An appropriate -ERRNO error value on error, or zero for success.
*/
int rc;
u16 cmd;
-#ifdef HAVE_ARCH_PCI_MWI
- rc = pcibios_prep_mwi(dev);
-#else
- rc = pci_generic_prep_mwi(dev);
-#endif
-
+ rc = pci_set_cacheline_size(dev);
if (rc)
return rc;
pci_read_config_word(dev, PCI_COMMAND, &cmd);
if (! (cmd & PCI_COMMAND_INVALIDATE)) {
- pr_debug("PCI: Enabling Mem-Wr-Inval for device %s\n", pci_name(dev));
+ dev_dbg(&dev->dev, "enabling Mem-Wr-Inval\n");
cmd |= PCI_COMMAND_INVALIDATE;
pci_write_config_word(dev, PCI_COMMAND, cmd);
}
}
/**
+ * pci_try_set_mwi - enables memory-write-invalidate PCI transaction
+ * @dev: the PCI device for which MWI is enabled
+ *
+ * Enables the Memory-Write-Invalidate transaction in %PCI_COMMAND.
+ * Callers are not required to check the return value.
+ *
+ * RETURNS: An appropriate -ERRNO error value on error, or zero for success.
+ */
+int pci_try_set_mwi(struct pci_dev *dev)
+{
+ int rc = pci_set_mwi(dev);
+ return rc;
+}
+
+/**
* pci_clear_mwi - disables Memory-Write-Invalidate for device dev
* @dev: the PCI device to disable
*
pci_write_config_word(dev, PCI_COMMAND, cmd);
}
}
+#endif /* ! PCI_DISABLE_MWI */
/**
* pci_intx - enables/disables PCI INTx for device dev
}
if (new != pci_command) {
+ struct pci_devres *dr;
+
pci_write_config_word(pdev, PCI_COMMAND, new);
+
+ dr = find_pci_dr(pdev);
+ if (dr && !dr->restore_intx) {
+ dr->restore_intx = 1;
+ dr->orig_intx = !enable;
+ }
+ }
+}
+
+/**
+ * pci_msi_off - disables any msi or msix capabilities
+ * @dev: the PCI device to operate on
+ *
+ * If you want to use msi see pci_enable_msi and friends.
+ * This is a lower level primitive that allows us to disable
+ * msi operation at the device level.
+ */
+void pci_msi_off(struct pci_dev *dev)
+{
+ int pos;
+ u16 control;
+
+ pos = pci_find_capability(dev, PCI_CAP_ID_MSI);
+ if (pos) {
+ pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &control);
+ control &= ~PCI_MSI_FLAGS_ENABLE;
+ pci_write_config_word(dev, pos + PCI_MSI_FLAGS, control);
+ }
+ pos = pci_find_capability(dev, PCI_CAP_ID_MSIX);
+ if (pos) {
+ pci_read_config_word(dev, pos + PCI_MSIX_FLAGS, &control);
+ control &= ~PCI_MSIX_FLAGS_ENABLE;
+ pci_write_config_word(dev, pos + PCI_MSIX_FLAGS, control);
}
}
return 0;
}
#endif
-
+
+#ifndef HAVE_ARCH_PCI_SET_DMA_MAX_SEGMENT_SIZE
+int pci_set_dma_max_seg_size(struct pci_dev *dev, unsigned int size)
+{
+ return dma_set_max_seg_size(&dev->dev, size);
+}
+EXPORT_SYMBOL(pci_set_dma_max_seg_size);
+#endif
+
+#ifndef HAVE_ARCH_PCI_SET_DMA_SEGMENT_BOUNDARY
+int pci_set_dma_seg_boundary(struct pci_dev *dev, unsigned long mask)
+{
+ return dma_set_seg_boundary(&dev->dev, mask);
+}
+EXPORT_SYMBOL(pci_set_dma_seg_boundary);
+#endif
+
+/**
+ * pcix_get_max_mmrbc - get PCI-X maximum designed memory read byte count
+ * @dev: PCI device to query
+ *
+ * Returns mmrbc: maximum designed memory read count in bytes
+ * or appropriate error value.
+ */
+int pcix_get_max_mmrbc(struct pci_dev *dev)
+{
+ int err, cap;
+ u32 stat;
+
+ cap = pci_find_capability(dev, PCI_CAP_ID_PCIX);
+ if (!cap)
+ return -EINVAL;
+
+ err = pci_read_config_dword(dev, cap + PCI_X_STATUS, &stat);
+ if (err)
+ return -EINVAL;
+
+ return (stat & PCI_X_STATUS_MAX_READ) >> 12;
+}
+EXPORT_SYMBOL(pcix_get_max_mmrbc);
+
+/**
+ * pcix_get_mmrbc - get PCI-X maximum memory read byte count
+ * @dev: PCI device to query
+ *
+ * Returns mmrbc: maximum memory read count in bytes
+ * or appropriate error value.
+ */
+int pcix_get_mmrbc(struct pci_dev *dev)
+{
+ int ret, cap;
+ u32 cmd;
+
+ cap = pci_find_capability(dev, PCI_CAP_ID_PCIX);
+ if (!cap)
+ return -EINVAL;
+
+ ret = pci_read_config_dword(dev, cap + PCI_X_CMD, &cmd);
+ if (!ret)
+ ret = 512 << ((cmd & PCI_X_CMD_MAX_READ) >> 2);
+
+ return ret;
+}
+EXPORT_SYMBOL(pcix_get_mmrbc);
+
+/**
+ * pcix_set_mmrbc - set PCI-X maximum memory read byte count
+ * @dev: PCI device to query
+ * @mmrbc: maximum memory read count in bytes
+ * valid values are 512, 1024, 2048, 4096
+ *
+ * If possible sets maximum memory read byte count, some bridges have erratas
+ * that prevent this.
+ */
+int pcix_set_mmrbc(struct pci_dev *dev, int mmrbc)
+{
+ int cap, err = -EINVAL;
+ u32 stat, cmd, v, o;
+
+ if (mmrbc < 512 || mmrbc > 4096 || !is_power_of_2(mmrbc))
+ goto out;
+
+ v = ffs(mmrbc) - 10;
+
+ cap = pci_find_capability(dev, PCI_CAP_ID_PCIX);
+ if (!cap)
+ goto out;
+
+ err = pci_read_config_dword(dev, cap + PCI_X_STATUS, &stat);
+ if (err)
+ goto out;
+
+ if (v > (stat & PCI_X_STATUS_MAX_READ) >> 21)
+ return -E2BIG;
+
+ err = pci_read_config_dword(dev, cap + PCI_X_CMD, &cmd);
+ if (err)
+ goto out;
+
+ o = (cmd & PCI_X_CMD_MAX_READ) >> 2;
+ if (o != v) {
+ if (v > o && dev->bus &&
+ (dev->bus->bus_flags & PCI_BUS_FLAGS_NO_MMRBC))
+ return -EIO;
+
+ cmd &= ~PCI_X_CMD_MAX_READ;
+ cmd |= v << 2;
+ err = pci_write_config_dword(dev, cap + PCI_X_CMD, cmd);
+ }
+out:
+ return err;
+}
+EXPORT_SYMBOL(pcix_set_mmrbc);
+
+/**
+ * pcie_get_readrq - get PCI Express read request size
+ * @dev: PCI device to query
+ *
+ * Returns maximum memory read request in bytes
+ * or appropriate error value.
+ */
+int pcie_get_readrq(struct pci_dev *dev)
+{
+ int ret, cap;
+ u16 ctl;
+
+ cap = pci_find_capability(dev, PCI_CAP_ID_EXP);
+ if (!cap)
+ return -EINVAL;
+
+ ret = pci_read_config_word(dev, cap + PCI_EXP_DEVCTL, &ctl);
+ if (!ret)
+ ret = 128 << ((ctl & PCI_EXP_DEVCTL_READRQ) >> 12);
+
+ return ret;
+}
+EXPORT_SYMBOL(pcie_get_readrq);
+
+/**
+ * pcie_set_readrq - set PCI Express maximum memory read request
+ * @dev: PCI device to query
+ * @rq: maximum memory read count in bytes
+ * valid values are 128, 256, 512, 1024, 2048, 4096
+ *
+ * If possible sets maximum read byte count
+ */
+int pcie_set_readrq(struct pci_dev *dev, int rq)
+{
+ int cap, err = -EINVAL;
+ u16 ctl, v;
+
+ if (rq < 128 || rq > 4096 || !is_power_of_2(rq))
+ goto out;
+
+ v = (ffs(rq) - 8) << 12;
+
+ cap = pci_find_capability(dev, PCI_CAP_ID_EXP);
+ if (!cap)
+ goto out;
+
+ err = pci_read_config_word(dev, cap + PCI_EXP_DEVCTL, &ctl);
+ if (err)
+ goto out;
+
+ if ((ctl & PCI_EXP_DEVCTL_READRQ) != v) {
+ ctl &= ~PCI_EXP_DEVCTL_READRQ;
+ ctl |= v;
+ err = pci_write_config_dword(dev, cap + PCI_EXP_DEVCTL, ctl);
+ }
+
+out:
+ return err;
+}
+EXPORT_SYMBOL(pcie_set_readrq);
+
+/**
+ * pci_select_bars - Make BAR mask from the type of resource
+ * @dev: the PCI device for which BAR mask is made
+ * @flags: resource type mask to be selected
+ *
+ * This helper routine makes bar mask from the type of resource.
+ */
+int pci_select_bars(struct pci_dev *dev, unsigned long flags)
+{
+ int i, bars = 0;
+ for (i = 0; i < PCI_NUM_RESOURCES; i++)
+ if (pci_resource_flags(dev, i) & flags)
+ bars |= (1 << i);
+ return bars;
+}
+
+static void __devinit pci_no_domains(void)
+{
+#ifdef CONFIG_PCI_DOMAINS
+ pci_domains_supported = 0;
+#endif
+}
+
static int __devinit pci_init(void)
{
struct pci_dev *dev = NULL;
if (*str && (str = pcibios_setup(str)) && *str) {
if (!strcmp(str, "nomsi")) {
pci_no_msi();
+ } else if (!strcmp(str, "noaer")) {
+ pci_no_aer();
+ } else if (!strcmp(str, "nodomains")) {
+ pci_no_domains();
+ } else if (!strncmp(str, "cbiosize=", 9)) {
+ pci_cardbus_io_size = memparse(str + 9, &str);
+ } else if (!strncmp(str, "cbmemsize=", 10)) {
+ pci_cardbus_mem_size = memparse(str + 10, &str);
} else {
printk(KERN_ERR "PCI: Unknown option `%s'\n",
str);
}
str = k;
}
- return 1;
+ return 0;
}
+early_param("pci", pci_setup);
device_initcall(pci_init);
-__setup("pci=", pci_setup);
-
-#if defined(CONFIG_ISA) || defined(CONFIG_EISA)
-/* FIXME: Some boxes have multiple ISA bridges! */
-struct pci_dev *isa_bridge;
-EXPORT_SYMBOL(isa_bridge);
-#endif
-
-EXPORT_SYMBOL_GPL(pci_restore_bars);
-EXPORT_SYMBOL(pci_enable_device_bars);
+EXPORT_SYMBOL(pci_reenable_device);
+EXPORT_SYMBOL(pci_enable_device_io);
+EXPORT_SYMBOL(pci_enable_device_mem);
EXPORT_SYMBOL(pci_enable_device);
+EXPORT_SYMBOL(pcim_enable_device);
+EXPORT_SYMBOL(pcim_pin_device);
EXPORT_SYMBOL(pci_disable_device);
EXPORT_SYMBOL(pci_find_capability);
EXPORT_SYMBOL(pci_bus_find_capability);
EXPORT_SYMBOL(pci_request_regions);
EXPORT_SYMBOL(pci_release_region);
EXPORT_SYMBOL(pci_request_region);
+EXPORT_SYMBOL(pci_release_selected_regions);
+EXPORT_SYMBOL(pci_request_selected_regions);
EXPORT_SYMBOL(pci_set_master);
EXPORT_SYMBOL(pci_set_mwi);
+EXPORT_SYMBOL(pci_try_set_mwi);
EXPORT_SYMBOL(pci_clear_mwi);
EXPORT_SYMBOL_GPL(pci_intx);
EXPORT_SYMBOL(pci_set_dma_mask);
EXPORT_SYMBOL(pci_set_consistent_dma_mask);
EXPORT_SYMBOL(pci_assign_resource);
EXPORT_SYMBOL(pci_find_parent_resource);
+EXPORT_SYMBOL(pci_select_bars);
EXPORT_SYMBOL(pci_set_power_state);
EXPORT_SYMBOL(pci_save_state);
EXPORT_SYMBOL(pci_restore_state);
+EXPORT_SYMBOL(pci_pme_capable);
EXPORT_SYMBOL(pci_enable_wake);
+EXPORT_SYMBOL(pci_target_state);
+EXPORT_SYMBOL(pci_prepare_to_sleep);
+EXPORT_SYMBOL(pci_back_from_sleep);
+EXPORT_SYMBOL_GPL(pci_set_pcie_reset_state);
-/* Quirk info */
-
-EXPORT_SYMBOL(isa_dma_bridge_buggy);
-EXPORT_SYMBOL(pci_pci_problems);