#include <asm/dma.h> /* isa_dma_bridge_buggy */
#include "pci.h"
+unsigned int pci_pm_d3_delay = 10;
/**
* pci_bus_max_busnr - returns maximum PCI bus number of given bus' children
return __pci_bus_find_cap(bus, devfn, hdr_type & 0x7f, cap);
}
-#if 0
/**
* pci_find_ext_capability - Find an extended capability
* @dev: PCI device to query
return 0;
}
-#endif /* 0 */
+EXPORT_SYMBOL_GPL(pci_find_ext_capability);
/**
* pci_find_parent_resource - return resource region of parent bus of given region
} else if (dev->current_state == state)
return 0; /* we're already there */
+ /*
+ * If the device or the parent bridge can't support PCI PM, ignore
+ * the request if we're doing anything besides putting it into D0
+ * (which would only happen on boot).
+ */
+ if ((state == PCI_D1 || state == PCI_D2) && pci_no_d1d2(dev))
+ return 0;
+
/* find PCI PM capability in list */
pm = pci_find_capability(dev, PCI_CAP_ID_PM);
/* Mandatory power management transition delays */
/* see PCI PM 1.1 5.6.1 table 18 */
if (state == PCI_D3hot || dev->current_state == PCI_D3hot)
- msleep(10);
+ msleep(pci_pm_d3_delay);
else if (state == PCI_D2 || dev->current_state == PCI_D2)
udelay(200);
/*
* Give firmware a chance to be called, such as ACPI _PRx, _PSx
- * Firmware method after natice method ?
+ * Firmware method after native method ?
*/
if (platform_pci_set_power_state)
platform_pci_set_power_state(dev, state);
case PM_EVENT_ON:
return PCI_D0;
case PM_EVENT_FREEZE:
+ case PM_EVENT_PRETHAW:
+ /* REVISIT both freeze and pre-thaw "should" use D0 */
case PM_EVENT_SUSPEND:
return PCI_D3hot;
default:
- printk("They asked me for state %d\n", state.event);
+ printk("Unrecognized suspend event %d\n", state.event);
BUG();
}
return PCI_D0;
EXPORT_SYMBOL(pci_choose_state);
+static int pci_save_pcie_state(struct pci_dev *dev)
+{
+ int pos, i = 0;
+ struct pci_cap_saved_state *save_state;
+ u16 *cap;
+
+ pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
+ if (pos <= 0)
+ return 0;
+
+ save_state = kzalloc(sizeof(*save_state) + sizeof(u16) * 4, GFP_KERNEL);
+ if (!save_state) {
+ dev_err(&dev->dev, "Out of memory in pci_save_pcie_state\n");
+ return -ENOMEM;
+ }
+ cap = (u16 *)&save_state->data[0];
+
+ pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &cap[i++]);
+ pci_read_config_word(dev, pos + PCI_EXP_LNKCTL, &cap[i++]);
+ pci_read_config_word(dev, pos + PCI_EXP_SLTCTL, &cap[i++]);
+ pci_read_config_word(dev, pos + PCI_EXP_RTCTL, &cap[i++]);
+ pci_add_saved_cap(dev, save_state);
+ return 0;
+}
+
+static void pci_restore_pcie_state(struct pci_dev *dev)
+{
+ int i = 0, pos;
+ struct pci_cap_saved_state *save_state;
+ u16 *cap;
+
+ save_state = pci_find_saved_cap(dev, PCI_CAP_ID_EXP);
+ pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
+ if (!save_state || pos <= 0)
+ return;
+ cap = (u16 *)&save_state->data[0];
+
+ pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, cap[i++]);
+ pci_write_config_word(dev, pos + PCI_EXP_LNKCTL, cap[i++]);
+ pci_write_config_word(dev, pos + PCI_EXP_SLTCTL, cap[i++]);
+ pci_write_config_word(dev, pos + PCI_EXP_RTCTL, cap[i++]);
+ pci_remove_saved_cap(save_state);
+ kfree(save_state);
+}
+
/**
* pci_save_state - save the PCI configuration space of a device before suspending
* @dev: - PCI device that we're dealing with
return i;
if ((i = pci_save_msix_state(dev)) != 0)
return i;
+ if ((i = pci_save_pcie_state(dev)) != 0)
+ return i;
return 0;
}
int i;
int val;
- for (i = 0; i < 16; i++) {
+ /* PCI Express register must be restored first */
+ pci_restore_pcie_state(dev);
+
+ /*
+ * The Base Address register should be programmed before the command
+ * register(s)
+ */
+ for (i = 15; i >= 0; i--) {
pci_read_config_dword(dev, i * 4, &val);
if (val != dev->saved_config_space[i]) {
printk(KERN_DEBUG "PM: Writing back config space on "
int
pci_enable_device(struct pci_dev *dev)
{
- int err = pci_enable_device_bars(dev, (1 << PCI_NUM_RESOURCES) - 1);
+ int err;
+
+ if (dev->is_enabled)
+ return 0;
+
+ err = pci_enable_device_bars(dev, (1 << PCI_NUM_RESOURCES) - 1);
if (err)
return err;
pci_fixup_device(pci_fixup_enable, dev);
pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
-
+
+ if (dev->msi_enabled)
+ disable_msi_mode(dev, pci_find_capability(dev, PCI_CAP_ID_MSI),
+ PCI_CAP_ID_MSI);
+ if (dev->msix_enabled)
+ disable_msi_mode(dev, pci_find_capability(dev, PCI_CAP_ID_MSI),
+ PCI_CAP_ID_MSIX);
+
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
return 0;
err_out:
- printk (KERN_WARNING "PCI: Unable to reserve %s region #%d:%lx@%lx for device %s\n",
+ printk (KERN_WARNING "PCI: Unable to reserve %s region #%d:%llx@%llx "
+ "for device %s\n",
pci_resource_flags(pdev, bar) & IORESOURCE_IO ? "I/O" : "mem",
bar + 1, /* PCI BAR # */
- pci_resource_len(pdev, bar), pci_resource_start(pdev, bar),
+ (unsigned long long)pci_resource_len(pdev, bar),
+ (unsigned long long)pci_resource_start(pdev, bar),
pci_name(pdev));
return -EBUSY;
}
}
str = k;
}
- return 1;
+ return 0;
}
+early_param("pci", pci_setup);
device_initcall(pci_init);
-__setup("pci=", pci_setup);
-
#if defined(CONFIG_ISA) || defined(CONFIG_EISA)
/* FIXME: Some boxes have multiple ISA bridges! */
struct pci_dev *isa_bridge;
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff