#include <linux/delay.h>
#include <linux/init.h>
#include <linux/pci.h>
+#include <linux/pm.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/string.h>
unsigned int pci_pm_d3_delay = 10;
+#define DEFAULT_CARDBUS_IO_SIZE (256)
+#define DEFAULT_CARDBUS_MEM_SIZE (64*1024*1024)
+/* pci=cbmemsize=nnM,cbiosize=nn can override this */
+unsigned long pci_cardbus_io_size = DEFAULT_CARDBUS_IO_SIZE;
+unsigned long pci_cardbus_mem_size = DEFAULT_CARDBUS_MEM_SIZE;
+
/**
* pci_bus_max_busnr - returns maximum PCI bus number of given bus' children
* @bus: pointer to PCI bus structure to search
if (pos <= 0)
return 0;
- save_state = kzalloc(sizeof(*save_state) + sizeof(u16) * 4, GFP_KERNEL);
+ save_state = pci_find_saved_cap(dev, PCI_CAP_ID_EXP);
+ if (!save_state)
+ save_state = kzalloc(sizeof(*save_state) + sizeof(u16) * 4, GFP_KERNEL);
if (!save_state) {
dev_err(&dev->dev, "Out of memory in pci_save_pcie_state\n");
return -ENOMEM;
pci_write_config_word(dev, pos + PCI_EXP_LNKCTL, cap[i++]);
pci_write_config_word(dev, pos + PCI_EXP_SLTCTL, cap[i++]);
pci_write_config_word(dev, pos + PCI_EXP_RTCTL, cap[i++]);
- pci_remove_saved_cap(save_state);
- kfree(save_state);
}
if (pos <= 0)
return 0;
- save_state = kzalloc(sizeof(*save_state) + sizeof(u16), GFP_KERNEL);
+ save_state = pci_find_saved_cap(dev, PCI_CAP_ID_EXP);
+ if (!save_state)
+ save_state = kzalloc(sizeof(*save_state) + sizeof(u16), GFP_KERNEL);
if (!save_state) {
dev_err(&dev->dev, "Out of memory in pci_save_pcie_state\n");
return -ENOMEM;
cap = (u16 *)&save_state->data[0];
pci_write_config_word(dev, pos + PCI_X_CMD, cap[i++]);
- pci_remove_saved_cap(save_state);
- kfree(save_state);
}
/* XXX: 100% dword access ok here? */
for (i = 0; i < 16; i++)
pci_read_config_dword(dev, i * 4,&dev->saved_config_space[i]);
- if ((i = pci_save_msi_state(dev)) != 0)
- return i;
if ((i = pci_save_pcie_state(dev)) != 0)
return i;
if ((i = pci_save_pcix_state(dev)) != 0)
* when a device is enabled using managed PCI device enable interface.
*/
struct pci_devres {
- unsigned int disable:1;
+ unsigned int enabled:1;
+ unsigned int pinned:1;
unsigned int orig_intx:1;
unsigned int restore_intx:1;
u32 region_mask;
if (this->restore_intx)
pci_intx(dev, this->orig_intx);
- if (this->disable)
+ if (this->enabled && !this->pinned)
pci_disable_device(dev);
}
dr = get_pci_dr(pdev);
if (unlikely(!dr))
return -ENOMEM;
- WARN_ON(!!dr->disable);
+ WARN_ON(!!dr->enabled);
rc = pci_enable_device(pdev);
if (!rc) {
pdev->is_managed = 1;
- dr->disable = 1;
+ dr->enabled = 1;
}
return rc;
}
struct pci_devres *dr;
dr = find_pci_dr(pdev);
- WARN_ON(!dr || !dr->disable);
+ WARN_ON(!dr || !dr->enabled);
if (dr)
- dr->disable = 0;
+ dr->pinned = 1;
}
/**
dr = find_pci_dr(dev);
if (dr)
- dr->disable = 0;
+ dr->enabled = 0;
if (atomic_sub_return(1, &dev->enable_cnt) != 0)
return;
- if (dev->msi_enabled)
- disable_msi_mode(dev, pci_find_capability(dev, PCI_CAP_ID_MSI),
- PCI_CAP_ID_MSI);
- if (dev->msix_enabled)
- disable_msi_mode(dev, pci_find_capability(dev, PCI_CAP_ID_MSI),
- PCI_CAP_ID_MSIX);
-
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
}
/**
- * pci_enable_wake - enable device to generate PME# when suspended
- * @dev: - PCI device to operate on
- * @state: - Current state of device.
- * @enable: - Flag to enable or disable generation
- *
- * Set the bits in the device's PM Capabilities to generate PME# when
- * the system is suspended.
+ * pcibios_set_pcie_reset_state - set reset state for device dev
+ * @dev: the PCI-E device reset
+ * @state: Reset state to enter into
+ *
+ *
+ * Sets the PCI-E reset state for the device. This is the default
+ * implementation. Architecture implementations can override this.
+ */
+int __attribute__ ((weak)) pcibios_set_pcie_reset_state(struct pci_dev *dev,
+ enum pcie_reset_state state)
+{
+ return -EINVAL;
+}
+
+/**
+ * pci_set_pcie_reset_state - set reset state for device dev
+ * @dev: the PCI-E device reset
+ * @state: Reset state to enter into
+ *
*
- * -EIO is returned if device doesn't have PM Capabilities.
- * -EINVAL is returned if device supports it, but can't generate wake events.
- * 0 if operation is successful.
- *
+ * Sets the PCI reset state for the device.
+ */
+int pci_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state)
+{
+ return pcibios_set_pcie_reset_state(dev, state);
+}
+
+/**
+ * pci_enable_wake - enable PCI device as wakeup event source
+ * @dev: PCI device affected
+ * @state: PCI state from which device will issue wakeup events
+ * @enable: True to enable event generation; false to disable
+ *
+ * This enables the device as a wakeup event source, or disables it.
+ * When such events involves platform-specific hooks, those hooks are
+ * called automatically by this routine.
+ *
+ * Devices with legacy power management (no standard PCI PM capabilities)
+ * always require such platform hooks. Depending on the platform, devices
+ * supporting the standard PCI PME# signal may require such platform hooks;
+ * they always update bits in config space to allow PME# generation.
+ *
+ * -EIO is returned if the device can't ever be a wakeup event source.
+ * -EINVAL is returned if the device can't generate wakeup events from
+ * the specified PCI state. Returns zero if the operation is successful.
*/
int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable)
{
int pm;
+ int status;
u16 value;
+ /* Note that drivers should verify device_may_wakeup(&dev->dev)
+ * before calling this function. Platform code should report
+ * errors when drivers try to enable wakeup on devices that
+ * can't issue wakeups, or on which wakeups were disabled by
+ * userspace updating the /sys/devices.../power/wakeup file.
+ */
+
+ status = call_platform_enable_wakeup(&dev->dev, enable);
+
/* find PCI PM capability in list */
pm = pci_find_capability(dev, PCI_CAP_ID_PM);
- /* If device doesn't support PM Capabilities, but request is to disable
- * wake events, it's a nop; otherwise fail */
- if (!pm)
- return enable ? -EIO : 0;
+ /* If device doesn't support PM Capabilities, but caller wants to
+ * disable wake events, it's a NOP. Otherwise fail unless the
+ * platform hooks handled this legacy device already.
+ */
+ if (!pm)
+ return enable ? status : 0;
/* Check device's ability to generate PME# */
pci_read_config_word(dev,pm+PCI_PM_PMC,&value);
value >>= ffs(PCI_PM_CAP_PME_MASK) - 1; /* First bit of mask */
/* Check if it can generate PME# from requested state. */
- if (!value || !(value & (1 << state)))
+ if (!value || !(value & (1 << state))) {
+ /* if it can't, revert what the platform hook changed,
+ * always reporting the base "EINVAL, can't PME#" error
+ */
+ if (enable)
+ call_platform_enable_wakeup(&dev->dev, 0);
return enable ? -EINVAL : 0;
+ }
pci_read_config_word(dev, pm + PCI_PM_CTRL, &value);
value &= ~PCI_PM_CTRL_PME_ENABLE;
pci_write_config_word(dev, pm + PCI_PM_CTRL, value);
-
+
return 0;
}
}
}
+/**
+ * pci_msi_off - disables any msi or msix capabilities
+ * @pdev: the PCI device to operate on
+ *
+ * If you want to use msi see pci_enable_msi and friends.
+ * This is a lower level primitive that allows us to disable
+ * msi operation at the device level.
+ */
+void pci_msi_off(struct pci_dev *dev)
+{
+ int pos;
+ u16 control;
+
+ pos = pci_find_capability(dev, PCI_CAP_ID_MSI);
+ if (pos) {
+ pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &control);
+ control &= ~PCI_MSI_FLAGS_ENABLE;
+ pci_write_config_word(dev, pos + PCI_MSI_FLAGS, control);
+ }
+ pos = pci_find_capability(dev, PCI_CAP_ID_MSIX);
+ if (pos) {
+ pci_read_config_word(dev, pos + PCI_MSIX_FLAGS, &control);
+ control &= ~PCI_MSIX_FLAGS_ENABLE;
+ pci_write_config_word(dev, pos + PCI_MSIX_FLAGS, control);
+ }
+}
+
#ifndef HAVE_ARCH_PCI_SET_DMA_MASK
/*
* These can be overridden by arch-specific implementations
/**
* pci_select_bars - Make BAR mask from the type of resource
- * @pdev: the PCI device for which BAR mask is made
+ * @dev: the PCI device for which BAR mask is made
* @flags: resource type mask to be selected
*
* This helper routine makes bar mask from the type of resource.
if (*str && (str = pcibios_setup(str)) && *str) {
if (!strcmp(str, "nomsi")) {
pci_no_msi();
+ } else if (!strncmp(str, "cbiosize=", 9)) {
+ pci_cardbus_io_size = memparse(str + 9, &str);
+ } else if (!strncmp(str, "cbmemsize=", 10)) {
+ pci_cardbus_mem_size = memparse(str + 10, &str);
} else {
printk(KERN_ERR "PCI: Unknown option `%s'\n",
str);
EXPORT_SYMBOL(pci_save_state);
EXPORT_SYMBOL(pci_restore_state);
EXPORT_SYMBOL(pci_enable_wake);
+EXPORT_SYMBOL_GPL(pci_set_pcie_reset_state);
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff