/*
- Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
+ Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
<http://rt2x00.serialmonkey.com>
This program is free software; you can redistribute it and/or modify
Supported chipsets: RT2561, RT2561s, RT2661.
*/
-/*
- * Set enviroment defines for rt2x00.h
- */
-#define DRV_NAME "rt61pci"
-
+#include <linux/crc-itu-t.h>
#include <linux/delay.h>
#include <linux/etherdevice.h>
#include <linux/init.h>
#include "rt61pci.h"
/*
+ * Allow hardware encryption to be disabled.
+ */
+static int modparam_nohwcrypt = 0;
+module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
+MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
+
+/*
* Register access.
* BBP and RF register require indirect register access,
* and use the CSR registers PHY_CSR3 and PHY_CSR4 to achieve this.
* the access attempt is considered to have failed,
* and we will print an error.
*/
-static u32 rt61pci_bbp_check(const struct rt2x00_dev *rt2x00dev)
+static u32 rt61pci_bbp_check(struct rt2x00_dev *rt2x00dev)
{
u32 reg;
unsigned int i;
return reg;
}
-static void rt61pci_bbp_write(const struct rt2x00_dev *rt2x00dev,
+static void rt61pci_bbp_write(struct rt2x00_dev *rt2x00dev,
const unsigned int word, const u8 value)
{
u32 reg;
rt2x00pci_register_write(rt2x00dev, PHY_CSR3, reg);
}
-static void rt61pci_bbp_read(const struct rt2x00_dev *rt2x00dev,
+static void rt61pci_bbp_read(struct rt2x00_dev *rt2x00dev,
const unsigned int word, u8 *value)
{
u32 reg;
*value = rt2x00_get_field32(reg, PHY_CSR3_VALUE);
}
-static void rt61pci_rf_write(const struct rt2x00_dev *rt2x00dev,
+static void rt61pci_rf_write(struct rt2x00_dev *rt2x00dev,
const unsigned int word, const u32 value)
{
u32 reg;
rt2x00_rf_write(rt2x00dev, word, value);
}
-static void rt61pci_mcu_request(const struct rt2x00_dev *rt2x00dev,
+#ifdef CONFIG_RT2X00_LIB_LEDS
+/*
+ * This function is only called from rt61pci_led_brightness()
+ * make gcc happy by placing this function inside the
+ * same ifdef statement as the caller.
+ */
+static void rt61pci_mcu_request(struct rt2x00_dev *rt2x00dev,
const u8 command, const u8 token,
const u8 arg0, const u8 arg1)
{
rt2x00_set_field32(®, HOST_CMD_CSR_INTERRUPT_MCU, 1);
rt2x00pci_register_write(rt2x00dev, HOST_CMD_CSR, reg);
}
+#endif /* CONFIG_RT2X00_LIB_LEDS */
static void rt61pci_eepromregister_read(struct eeprom_93cx6 *eeprom)
{
#ifdef CONFIG_RT2X00_LIB_DEBUGFS
#define CSR_OFFSET(__word) ( CSR_REG_BASE + ((__word) * sizeof(u32)) )
-static void rt61pci_read_csr(const struct rt2x00_dev *rt2x00dev,
+static void rt61pci_read_csr(struct rt2x00_dev *rt2x00dev,
const unsigned int word, u32 *data)
{
rt2x00pci_register_read(rt2x00dev, CSR_OFFSET(word), data);
}
-static void rt61pci_write_csr(const struct rt2x00_dev *rt2x00dev,
+static void rt61pci_write_csr(struct rt2x00_dev *rt2x00dev,
const unsigned int word, u32 data)
{
rt2x00pci_register_write(rt2x00dev, CSR_OFFSET(word), data);
};
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
-#ifdef CONFIG_RT61PCI_RFKILL
+#ifdef CONFIG_RT2X00_LIB_RFKILL
static int rt61pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
{
u32 reg;
rt2x00pci_register_read(rt2x00dev, MAC_CSR13, ®);
- return rt2x00_get_field32(reg, MAC_CSR13_BIT5);;
+ return rt2x00_get_field32(reg, MAC_CSR13_BIT5);
}
#else
#define rt61pci_rfkill_poll NULL
-#endif /* CONFIG_RT61PCI_RFKILL */
+#endif /* CONFIG_RT2X00_LIB_RFKILL */
+
+#ifdef CONFIG_RT2X00_LIB_LEDS
+static void rt61pci_brightness_set(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ struct rt2x00_led *led =
+ container_of(led_cdev, struct rt2x00_led, led_dev);
+ unsigned int enabled = brightness != LED_OFF;
+ unsigned int a_mode =
+ (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_5GHZ);
+ unsigned int bg_mode =
+ (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ);
+
+ if (led->type == LED_TYPE_RADIO) {
+ rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg,
+ MCU_LEDCS_RADIO_STATUS, enabled);
+
+ rt61pci_mcu_request(led->rt2x00dev, MCU_LED, 0xff,
+ (led->rt2x00dev->led_mcu_reg & 0xff),
+ ((led->rt2x00dev->led_mcu_reg >> 8)));
+ } else if (led->type == LED_TYPE_ASSOC) {
+ rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg,
+ MCU_LEDCS_LINK_BG_STATUS, bg_mode);
+ rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg,
+ MCU_LEDCS_LINK_A_STATUS, a_mode);
+
+ rt61pci_mcu_request(led->rt2x00dev, MCU_LED, 0xff,
+ (led->rt2x00dev->led_mcu_reg & 0xff),
+ ((led->rt2x00dev->led_mcu_reg >> 8)));
+ } else if (led->type == LED_TYPE_QUALITY) {
+ /*
+ * The brightness is divided into 6 levels (0 - 5),
+ * this means we need to convert the brightness
+ * argument into the matching level within that range.
+ */
+ rt61pci_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff,
+ brightness / (LED_FULL / 6), 0);
+ }
+}
+
+static int rt61pci_blink_set(struct led_classdev *led_cdev,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ struct rt2x00_led *led =
+ container_of(led_cdev, struct rt2x00_led, led_dev);
+ u32 reg;
+
+ rt2x00pci_register_read(led->rt2x00dev, MAC_CSR14, ®);
+ rt2x00_set_field32(®, MAC_CSR14_ON_PERIOD, *delay_on);
+ rt2x00_set_field32(®, MAC_CSR14_OFF_PERIOD, *delay_off);
+ rt2x00pci_register_write(led->rt2x00dev, MAC_CSR14, reg);
+
+ return 0;
+}
+
+static void rt61pci_init_led(struct rt2x00_dev *rt2x00dev,
+ struct rt2x00_led *led,
+ enum led_type type)
+{
+ led->rt2x00dev = rt2x00dev;
+ led->type = type;
+ led->led_dev.brightness_set = rt61pci_brightness_set;
+ led->led_dev.blink_set = rt61pci_blink_set;
+ led->flags = LED_INITIALIZED;
+}
+#endif /* CONFIG_RT2X00_LIB_LEDS */
/*
* Configuration handlers.
*/
-static void rt61pci_config_mac_addr(struct rt2x00_dev *rt2x00dev, __le32 *mac)
+static int rt61pci_config_shared_key(struct rt2x00_dev *rt2x00dev,
+ struct rt2x00lib_crypto *crypto,
+ struct ieee80211_key_conf *key)
{
- u32 tmp;
+ struct hw_key_entry key_entry;
+ struct rt2x00_field32 field;
+ u32 mask;
+ u32 reg;
- tmp = le32_to_cpu(mac[1]);
- rt2x00_set_field32(&tmp, MAC_CSR3_UNICAST_TO_ME_MASK, 0xff);
- mac[1] = cpu_to_le32(tmp);
+ if (crypto->cmd == SET_KEY) {
+ /*
+ * rt2x00lib can't determine the correct free
+ * key_idx for shared keys. We have 1 register
+ * with key valid bits. The goal is simple, read
+ * the register, if that is full we have no slots
+ * left.
+ * Note that each BSS is allowed to have up to 4
+ * shared keys, so put a mask over the allowed
+ * entries.
+ */
+ mask = (0xf << crypto->bssidx);
- rt2x00pci_register_multiwrite(rt2x00dev, MAC_CSR2, mac,
- (2 * sizeof(__le32)));
-}
+ rt2x00pci_register_read(rt2x00dev, SEC_CSR0, ®);
+ reg &= mask;
-static void rt61pci_config_bssid(struct rt2x00_dev *rt2x00dev, __le32 *bssid)
-{
- u32 tmp;
+ if (reg && reg == mask)
+ return -ENOSPC;
+
+ key->hw_key_idx += reg ? ffz(reg) : 0;
- tmp = le32_to_cpu(bssid[1]);
- rt2x00_set_field32(&tmp, MAC_CSR5_BSS_ID_MASK, 3);
- bssid[1] = cpu_to_le32(tmp);
+ /*
+ * Upload key to hardware
+ */
+ memcpy(key_entry.key, crypto->key,
+ sizeof(key_entry.key));
+ memcpy(key_entry.tx_mic, crypto->tx_mic,
+ sizeof(key_entry.tx_mic));
+ memcpy(key_entry.rx_mic, crypto->rx_mic,
+ sizeof(key_entry.rx_mic));
+
+ reg = SHARED_KEY_ENTRY(key->hw_key_idx);
+ rt2x00pci_register_multiwrite(rt2x00dev, reg,
+ &key_entry, sizeof(key_entry));
+
+ /*
+ * The cipher types are stored over 2 registers.
+ * bssidx 0 and 1 keys are stored in SEC_CSR1 and
+ * bssidx 1 and 2 keys are stored in SEC_CSR5.
+ * Using the correct defines correctly will cause overhead,
+ * so just calculate the correct offset.
+ */
+ if (key->hw_key_idx < 8) {
+ field.bit_offset = (3 * key->hw_key_idx);
+ field.bit_mask = 0x7 << field.bit_offset;
+
+ rt2x00pci_register_read(rt2x00dev, SEC_CSR1, ®);
+ rt2x00_set_field32(®, field, crypto->cipher);
+ rt2x00pci_register_write(rt2x00dev, SEC_CSR1, reg);
+ } else {
+ field.bit_offset = (3 * (key->hw_key_idx - 8));
+ field.bit_mask = 0x7 << field.bit_offset;
+
+ rt2x00pci_register_read(rt2x00dev, SEC_CSR5, ®);
+ rt2x00_set_field32(®, field, crypto->cipher);
+ rt2x00pci_register_write(rt2x00dev, SEC_CSR5, reg);
+ }
+
+ /*
+ * The driver does not support the IV/EIV generation
+ * in hardware. However it doesn't support the IV/EIV
+ * inside the ieee80211 frame either, but requires it
+ * to be provided seperately for the descriptor.
+ * rt2x00lib will cut the IV/EIV data out of all frames
+ * given to us by mac80211, but we must tell mac80211
+ * to generate the IV/EIV data.
+ */
+ key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
+ }
+
+ /*
+ * SEC_CSR0 contains only single-bit fields to indicate
+ * a particular key is valid. Because using the FIELD32()
+ * defines directly will cause a lot of overhead we use
+ * a calculation to determine the correct bit directly.
+ */
+ mask = 1 << key->hw_key_idx;
+
+ rt2x00pci_register_read(rt2x00dev, SEC_CSR0, ®);
+ if (crypto->cmd == SET_KEY)
+ reg |= mask;
+ else if (crypto->cmd == DISABLE_KEY)
+ reg &= ~mask;
+ rt2x00pci_register_write(rt2x00dev, SEC_CSR0, reg);
- rt2x00pci_register_multiwrite(rt2x00dev, MAC_CSR4, bssid,
- (2 * sizeof(__le32)));
+ return 0;
}
-static void rt61pci_config_type(struct rt2x00_dev *rt2x00dev, const int type,
- const int tsf_sync)
+static int rt61pci_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
+ struct rt2x00lib_crypto *crypto,
+ struct ieee80211_key_conf *key)
{
+ struct hw_pairwise_ta_entry addr_entry;
+ struct hw_key_entry key_entry;
+ u32 mask;
u32 reg;
+ if (crypto->cmd == SET_KEY) {
+ /*
+ * rt2x00lib can't determine the correct free
+ * key_idx for pairwise keys. We have 2 registers
+ * with key valid bits. The goal is simple, read
+ * the first register, if that is full move to
+ * the next register.
+ * When both registers are full, we drop the key,
+ * otherwise we use the first invalid entry.
+ */
+ rt2x00pci_register_read(rt2x00dev, SEC_CSR2, ®);
+ if (reg && reg == ~0) {
+ key->hw_key_idx = 32;
+ rt2x00pci_register_read(rt2x00dev, SEC_CSR3, ®);
+ if (reg && reg == ~0)
+ return -ENOSPC;
+ }
+
+ key->hw_key_idx += reg ? ffz(reg) : 0;
+
+ /*
+ * Upload key to hardware
+ */
+ memcpy(key_entry.key, crypto->key,
+ sizeof(key_entry.key));
+ memcpy(key_entry.tx_mic, crypto->tx_mic,
+ sizeof(key_entry.tx_mic));
+ memcpy(key_entry.rx_mic, crypto->rx_mic,
+ sizeof(key_entry.rx_mic));
+
+ memset(&addr_entry, 0, sizeof(addr_entry));
+ memcpy(&addr_entry, crypto->address, ETH_ALEN);
+ addr_entry.cipher = crypto->cipher;
+
+ reg = PAIRWISE_KEY_ENTRY(key->hw_key_idx);
+ rt2x00pci_register_multiwrite(rt2x00dev, reg,
+ &key_entry, sizeof(key_entry));
+
+ reg = PAIRWISE_TA_ENTRY(key->hw_key_idx);
+ rt2x00pci_register_multiwrite(rt2x00dev, reg,
+ &addr_entry, sizeof(addr_entry));
+
+ /*
+ * Enable pairwise lookup table for given BSS idx,
+ * without this received frames will not be decrypted
+ * by the hardware.
+ */
+ rt2x00pci_register_read(rt2x00dev, SEC_CSR4, ®);
+ reg |= (1 << crypto->bssidx);
+ rt2x00pci_register_write(rt2x00dev, SEC_CSR4, reg);
+
+ /*
+ * The driver does not support the IV/EIV generation
+ * in hardware. However it doesn't support the IV/EIV
+ * inside the ieee80211 frame either, but requires it
+ * to be provided seperately for the descriptor.
+ * rt2x00lib will cut the IV/EIV data out of all frames
+ * given to us by mac80211, but we must tell mac80211
+ * to generate the IV/EIV data.
+ */
+ key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
+ }
+
/*
- * Clear current synchronisation setup.
- * For the Beacon base registers we only need to clear
- * the first byte since that byte contains the VALID and OWNER
- * bits which (when set to 0) will invalidate the entire beacon.
+ * SEC_CSR2 and SEC_CSR3 contain only single-bit fields to indicate
+ * a particular key is valid. Because using the FIELD32()
+ * defines directly will cause a lot of overhead we use
+ * a calculation to determine the correct bit directly.
*/
- rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, 0);
- rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE0, 0);
- rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE1, 0);
- rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE2, 0);
- rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE3, 0);
+ if (key->hw_key_idx < 32) {
+ mask = 1 << key->hw_key_idx;
+
+ rt2x00pci_register_read(rt2x00dev, SEC_CSR2, ®);
+ if (crypto->cmd == SET_KEY)
+ reg |= mask;
+ else if (crypto->cmd == DISABLE_KEY)
+ reg &= ~mask;
+ rt2x00pci_register_write(rt2x00dev, SEC_CSR2, reg);
+ } else {
+ mask = 1 << (key->hw_key_idx - 32);
+
+ rt2x00pci_register_read(rt2x00dev, SEC_CSR3, ®);
+ if (crypto->cmd == SET_KEY)
+ reg |= mask;
+ else if (crypto->cmd == DISABLE_KEY)
+ reg &= ~mask;
+ rt2x00pci_register_write(rt2x00dev, SEC_CSR3, reg);
+ }
+
+ return 0;
+}
+
+static void rt61pci_config_filter(struct rt2x00_dev *rt2x00dev,
+ const unsigned int filter_flags)
+{
+ u32 reg;
/*
- * Enable synchronisation.
+ * Start configuration steps.
+ * Note that the version error will always be dropped
+ * and broadcast frames will always be accepted since
+ * there is no filter for it at this time.
*/
- rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, ®);
- rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 1);
- rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 1);
- rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0);
- rt2x00_set_field32(®, TXRX_CSR9_TSF_SYNC, tsf_sync);
- rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
+ rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, ®);
+ rt2x00_set_field32(®, TXRX_CSR0_DROP_CRC,
+ !(filter_flags & FIF_FCSFAIL));
+ rt2x00_set_field32(®, TXRX_CSR0_DROP_PHYSICAL,
+ !(filter_flags & FIF_PLCPFAIL));
+ rt2x00_set_field32(®, TXRX_CSR0_DROP_CONTROL,
+ !(filter_flags & FIF_CONTROL));
+ rt2x00_set_field32(®, TXRX_CSR0_DROP_NOT_TO_ME,
+ !(filter_flags & FIF_PROMISC_IN_BSS));
+ rt2x00_set_field32(®, TXRX_CSR0_DROP_TO_DS,
+ !(filter_flags & FIF_PROMISC_IN_BSS) &&
+ !rt2x00dev->intf_ap_count);
+ rt2x00_set_field32(®, TXRX_CSR0_DROP_VERSION_ERROR, 1);
+ rt2x00_set_field32(®, TXRX_CSR0_DROP_MULTICAST,
+ !(filter_flags & FIF_ALLMULTI));
+ rt2x00_set_field32(®, TXRX_CSR0_DROP_BROADCAST, 0);
+ rt2x00_set_field32(®, TXRX_CSR0_DROP_ACK_CTS,
+ !(filter_flags & FIF_CONTROL));
+ rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg);
}
-static void rt61pci_config_preamble(struct rt2x00_dev *rt2x00dev,
- const int short_preamble,
- const int ack_timeout,
- const int ack_consume_time)
+static void rt61pci_config_intf(struct rt2x00_dev *rt2x00dev,
+ struct rt2x00_intf *intf,
+ struct rt2x00intf_conf *conf,
+ const unsigned int flags)
+{
+ unsigned int beacon_base;
+ u32 reg;
+
+ if (flags & CONFIG_UPDATE_TYPE) {
+ /*
+ * Clear current synchronisation setup.
+ * For the Beacon base registers we only need to clear
+ * the first byte since that byte contains the VALID and OWNER
+ * bits which (when set to 0) will invalidate the entire beacon.
+ */
+ beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx);
+ rt2x00pci_register_write(rt2x00dev, beacon_base, 0);
+
+ /*
+ * Enable synchronisation.
+ */
+ rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, ®);
+ rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 1);
+ rt2x00_set_field32(®, TXRX_CSR9_TSF_SYNC, conf->sync);
+ rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 1);
+ rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
+ }
+
+ if (flags & CONFIG_UPDATE_MAC) {
+ reg = le32_to_cpu(conf->mac[1]);
+ rt2x00_set_field32(®, MAC_CSR3_UNICAST_TO_ME_MASK, 0xff);
+ conf->mac[1] = cpu_to_le32(reg);
+
+ rt2x00pci_register_multiwrite(rt2x00dev, MAC_CSR2,
+ conf->mac, sizeof(conf->mac));
+ }
+
+ if (flags & CONFIG_UPDATE_BSSID) {
+ reg = le32_to_cpu(conf->bssid[1]);
+ rt2x00_set_field32(®, MAC_CSR5_BSS_ID_MASK, 3);
+ conf->bssid[1] = cpu_to_le32(reg);
+
+ rt2x00pci_register_multiwrite(rt2x00dev, MAC_CSR4,
+ conf->bssid, sizeof(conf->bssid));
+ }
+}
+
+static void rt61pci_config_erp(struct rt2x00_dev *rt2x00dev,
+ struct rt2x00lib_erp *erp)
{
u32 reg;
rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, ®);
- rt2x00_set_field32(®, TXRX_CSR0_RX_ACK_TIMEOUT, ack_timeout);
+ rt2x00_set_field32(®, TXRX_CSR0_RX_ACK_TIMEOUT, erp->ack_timeout);
rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg);
rt2x00pci_register_read(rt2x00dev, TXRX_CSR4, ®);
rt2x00_set_field32(®, TXRX_CSR4_AUTORESPOND_PREAMBLE,
- !!short_preamble);
+ !!erp->short_preamble);
rt2x00pci_register_write(rt2x00dev, TXRX_CSR4, reg);
}
+
+static void rt61pci_config_lna_gain(struct rt2x00_dev *rt2x00dev,
+ struct rt2x00lib_conf *libconf)
+{
+ u16 eeprom;
+ short lna_gain = 0;
+
+ if (libconf->band == IEEE80211_BAND_2GHZ) {
+ if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags))
+ lna_gain += 14;
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom);
+ lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1);
+ } else {
+ if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags))
+ lna_gain += 14;
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom);
+ lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_A_1);
+ }
+
+ rt2x00dev->lna_gain = lna_gain;
+}
+
static void rt61pci_config_phymode(struct rt2x00_dev *rt2x00dev,
const int basic_rate_mask)
{
}
static void rt61pci_config_antenna_5x(struct rt2x00_dev *rt2x00dev,
- const int antenna_tx,
- const int antenna_rx)
+ struct antenna_setup *ant)
{
u8 r3;
u8 r4;
rt61pci_bbp_read(rt2x00dev, 77, &r77);
rt2x00_set_field8(&r3, BBP_R3_SMART_MODE,
- !rt2x00_rf(&rt2x00dev->chip, RF5225));
+ rt2x00_rf(&rt2x00dev->chip, RF5325));
- switch (antenna_rx) {
- case ANTENNA_SW_DIVERSITY:
+ /*
+ * Configure the RX antenna.
+ */
+ switch (ant->rx) {
case ANTENNA_HW_DIVERSITY:
- rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2);
+ rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 2);
rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END,
- !!(rt2x00dev->curr_hwmode != HWMODE_A));
+ (rt2x00dev->curr_band != IEEE80211_BAND_5GHZ));
break;
case ANTENNA_A:
- rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1);
+ rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0);
-
- if (rt2x00dev->curr_hwmode == HWMODE_A)
- rt2x00_set_field8(&r77, BBP_R77_PAIR, 0);
+ if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ)
+ rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
else
- rt2x00_set_field8(&r77, BBP_R77_PAIR, 3);
+ rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
break;
case ANTENNA_B:
- rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1);
+ default:
+ rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0);
-
- if (rt2x00dev->curr_hwmode == HWMODE_A)
- rt2x00_set_field8(&r77, BBP_R77_PAIR, 3);
+ if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ)
+ rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
else
- rt2x00_set_field8(&r77, BBP_R77_PAIR, 0);
+ rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
break;
}
}
static void rt61pci_config_antenna_2x(struct rt2x00_dev *rt2x00dev,
- const int antenna_tx,
- const int antenna_rx)
+ struct antenna_setup *ant)
{
u8 r3;
u8 r4;
rt61pci_bbp_read(rt2x00dev, 77, &r77);
rt2x00_set_field8(&r3, BBP_R3_SMART_MODE,
- !rt2x00_rf(&rt2x00dev->chip, RF2527));
+ rt2x00_rf(&rt2x00dev->chip, RF2529));
rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END,
!test_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags));
- switch (antenna_rx) {
- case ANTENNA_SW_DIVERSITY:
+ /*
+ * Configure the RX antenna.
+ */
+ switch (ant->rx) {
case ANTENNA_HW_DIVERSITY:
- rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2);
+ rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 2);
break;
case ANTENNA_A:
- rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1);
- rt2x00_set_field8(&r77, BBP_R77_PAIR, 3);
+ rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
+ rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
break;
case ANTENNA_B:
- rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1);
- rt2x00_set_field8(&r77, BBP_R77_PAIR, 0);
+ default:
+ rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
+ rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
break;
}
rt2x00pci_register_read(rt2x00dev, MAC_CSR13, ®);
- if (p1 != 0xff) {
- rt2x00_set_field32(®, MAC_CSR13_BIT4, !!p1);
- rt2x00_set_field32(®, MAC_CSR13_BIT12, 0);
- rt2x00pci_register_write(rt2x00dev, MAC_CSR13, reg);
- }
- if (p2 != 0xff) {
- rt2x00_set_field32(®, MAC_CSR13_BIT3, !p2);
- rt2x00_set_field32(®, MAC_CSR13_BIT11, 0);
- rt2x00pci_register_write(rt2x00dev, MAC_CSR13, reg);
- }
+ rt2x00_set_field32(®, MAC_CSR13_BIT4, p1);
+ rt2x00_set_field32(®, MAC_CSR13_BIT12, 0);
+
+ rt2x00_set_field32(®, MAC_CSR13_BIT3, !p2);
+ rt2x00_set_field32(®, MAC_CSR13_BIT11, 0);
+
+ rt2x00pci_register_write(rt2x00dev, MAC_CSR13, reg);
}
static void rt61pci_config_antenna_2529(struct rt2x00_dev *rt2x00dev,
- const int antenna_tx,
- const int antenna_rx)
+ struct antenna_setup *ant)
{
- u16 eeprom;
u8 r3;
u8 r4;
u8 r77;
rt61pci_bbp_read(rt2x00dev, 3, &r3);
rt61pci_bbp_read(rt2x00dev, 4, &r4);
rt61pci_bbp_read(rt2x00dev, 77, &r77);
- rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
- rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, 0);
-
- if (rt2x00_get_field16(eeprom, EEPROM_NIC_ENABLE_DIVERSITY) &&
- rt2x00_get_field16(eeprom, EEPROM_NIC_TX_DIVERSITY)) {
- rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2);
- rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 1);
- rt61pci_config_antenna_2529_rx(rt2x00dev, 0, 1);
- } else if (rt2x00_get_field16(eeprom, EEPROM_NIC_ENABLE_DIVERSITY)) {
- if (rt2x00_get_field16(eeprom, EEPROM_NIC_TX_RX_FIXED) >= 2) {
- rt2x00_set_field8(&r77, BBP_R77_PAIR, 3);
- rt61pci_bbp_write(rt2x00dev, 77, r77);
- }
- rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1);
+ /*
+ * Configure the RX antenna.
+ */
+ switch (ant->rx) {
+ case ANTENNA_A:
+ rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
+ rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
+ rt61pci_config_antenna_2529_rx(rt2x00dev, 0, 0);
+ break;
+ case ANTENNA_HW_DIVERSITY:
+ /*
+ * FIXME: Antenna selection for the rf 2529 is very confusing
+ * in the legacy driver. Just default to antenna B until the
+ * legacy code can be properly translated into rt2x00 code.
+ */
+ case ANTENNA_B:
+ default:
+ rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
+ rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
rt61pci_config_antenna_2529_rx(rt2x00dev, 1, 1);
- } else if (!rt2x00_get_field16(eeprom, EEPROM_NIC_ENABLE_DIVERSITY) &&
- rt2x00_get_field16(eeprom, EEPROM_NIC_TX_DIVERSITY)) {
- rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2);
- rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0);
-
- switch (rt2x00_get_field16(eeprom, EEPROM_NIC_TX_RX_FIXED)) {
- case 0:
- rt61pci_config_antenna_2529_rx(rt2x00dev, 0, 1);
- break;
- case 1:
- rt61pci_config_antenna_2529_rx(rt2x00dev, 1, 0);
- break;
- case 2:
- rt61pci_config_antenna_2529_rx(rt2x00dev, 0, 0);
- break;
- case 3:
- rt61pci_config_antenna_2529_rx(rt2x00dev, 1, 1);
- break;
- }
- } else if (!rt2x00_get_field16(eeprom, EEPROM_NIC_ENABLE_DIVERSITY) &&
- !rt2x00_get_field16(eeprom, EEPROM_NIC_TX_DIVERSITY)) {
- rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1);
- rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0);
-
- switch (rt2x00_get_field16(eeprom, EEPROM_NIC_TX_RX_FIXED)) {
- case 0:
- rt2x00_set_field8(&r77, BBP_R77_PAIR, 0);
- rt61pci_bbp_write(rt2x00dev, 77, r77);
- rt61pci_config_antenna_2529_rx(rt2x00dev, 0, 1);
- break;
- case 1:
- rt2x00_set_field8(&r77, BBP_R77_PAIR, 0);
- rt61pci_bbp_write(rt2x00dev, 77, r77);
- rt61pci_config_antenna_2529_rx(rt2x00dev, 1, 0);
- break;
- case 2:
- rt2x00_set_field8(&r77, BBP_R77_PAIR, 3);
- rt61pci_bbp_write(rt2x00dev, 77, r77);
- rt61pci_config_antenna_2529_rx(rt2x00dev, 0, 0);
- break;
- case 3:
- rt2x00_set_field8(&r77, BBP_R77_PAIR, 3);
- rt61pci_bbp_write(rt2x00dev, 77, r77);
- rt61pci_config_antenna_2529_rx(rt2x00dev, 1, 1);
- break;
- }
+ break;
}
+ rt61pci_bbp_write(rt2x00dev, 77, r77);
rt61pci_bbp_write(rt2x00dev, 3, r3);
rt61pci_bbp_write(rt2x00dev, 4, r4);
}
};
static void rt61pci_config_antenna(struct rt2x00_dev *rt2x00dev,
- const int antenna_tx, const int antenna_rx)
+ struct antenna_setup *ant)
{
const struct antenna_sel *sel;
unsigned int lna;
unsigned int i;
u32 reg;
- rt2x00pci_register_read(rt2x00dev, PHY_CSR0, ®);
+ /*
+ * We should never come here because rt2x00lib is supposed
+ * to catch this and send us the correct antenna explicitely.
+ */
+ BUG_ON(ant->rx == ANTENNA_SW_DIVERSITY ||
+ ant->tx == ANTENNA_SW_DIVERSITY);
- if (rt2x00dev->curr_hwmode == HWMODE_A) {
+ if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) {
sel = antenna_sel_a;
lna = test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags);
-
- rt2x00_set_field32(®, PHY_CSR0_PA_PE_BG, 0);
- rt2x00_set_field32(®, PHY_CSR0_PA_PE_A, 1);
} else {
sel = antenna_sel_bg;
lna = test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags);
-
- rt2x00_set_field32(®, PHY_CSR0_PA_PE_BG, 1);
- rt2x00_set_field32(®, PHY_CSR0_PA_PE_A, 0);
}
for (i = 0; i < ARRAY_SIZE(antenna_sel_a); i++)
rt61pci_bbp_write(rt2x00dev, sel[i].word, sel[i].value[lna]);
+ rt2x00pci_register_read(rt2x00dev, PHY_CSR0, ®);
+
+ rt2x00_set_field32(®, PHY_CSR0_PA_PE_BG,
+ rt2x00dev->curr_band == IEEE80211_BAND_2GHZ);
+ rt2x00_set_field32(®, PHY_CSR0_PA_PE_A,
+ rt2x00dev->curr_band == IEEE80211_BAND_5GHZ);
+
rt2x00pci_register_write(rt2x00dev, PHY_CSR0, reg);
if (rt2x00_rf(&rt2x00dev->chip, RF5225) ||
rt2x00_rf(&rt2x00dev->chip, RF5325))
- rt61pci_config_antenna_5x(rt2x00dev, antenna_tx, antenna_rx);
+ rt61pci_config_antenna_5x(rt2x00dev, ant);
else if (rt2x00_rf(&rt2x00dev->chip, RF2527))
- rt61pci_config_antenna_2x(rt2x00dev, antenna_tx, antenna_rx);
+ rt61pci_config_antenna_2x(rt2x00dev, ant);
else if (rt2x00_rf(&rt2x00dev->chip, RF2529)) {
if (test_bit(CONFIG_DOUBLE_ANTENNA, &rt2x00dev->flags))
- rt61pci_config_antenna_2x(rt2x00dev, antenna_tx,
- antenna_rx);
+ rt61pci_config_antenna_2x(rt2x00dev, ant);
else
- rt61pci_config_antenna_2529(rt2x00dev, antenna_tx,
- antenna_rx);
+ rt61pci_config_antenna_2529(rt2x00dev, ant);
}
}
}
static void rt61pci_config(struct rt2x00_dev *rt2x00dev,
- const unsigned int flags,
- struct rt2x00lib_conf *libconf)
+ struct rt2x00lib_conf *libconf,
+ const unsigned int flags)
{
+ /* Always recalculate LNA gain before changing configuration */
+ rt61pci_config_lna_gain(rt2x00dev, libconf);
+
if (flags & CONFIG_UPDATE_PHYMODE)
rt61pci_config_phymode(rt2x00dev, libconf->basic_rates);
if (flags & CONFIG_UPDATE_CHANNEL)
if ((flags & CONFIG_UPDATE_TXPOWER) && !(flags & CONFIG_UPDATE_CHANNEL))
rt61pci_config_txpower(rt2x00dev, libconf->conf->power_level);
if (flags & CONFIG_UPDATE_ANTENNA)
- rt61pci_config_antenna(rt2x00dev, libconf->conf->antenna_sel_tx,
- libconf->conf->antenna_sel_rx);
+ rt61pci_config_antenna(rt2x00dev, &libconf->ant);
if (flags & (CONFIG_UPDATE_SLOT_TIME | CONFIG_UPDATE_BEACON_INT))
rt61pci_config_duration(rt2x00dev, libconf);
}
/*
- * LED functions.
- */
-static void rt61pci_enable_led(struct rt2x00_dev *rt2x00dev)
-{
- u32 reg;
- u16 led_reg;
- u8 arg0;
- u8 arg1;
-
- rt2x00pci_register_read(rt2x00dev, MAC_CSR14, ®);
- rt2x00_set_field32(®, MAC_CSR14_ON_PERIOD, 70);
- rt2x00_set_field32(®, MAC_CSR14_OFF_PERIOD, 30);
- rt2x00pci_register_write(rt2x00dev, MAC_CSR14, reg);
-
- led_reg = rt2x00dev->led_reg;
- rt2x00_set_field16(&led_reg, MCU_LEDCS_RADIO_STATUS, 1);
- if (rt2x00dev->rx_status.phymode == MODE_IEEE80211A)
- rt2x00_set_field16(&led_reg, MCU_LEDCS_LINK_A_STATUS, 1);
- else
- rt2x00_set_field16(&led_reg, MCU_LEDCS_LINK_BG_STATUS, 1);
-
- arg0 = led_reg & 0xff;
- arg1 = (led_reg >> 8) & 0xff;
-
- rt61pci_mcu_request(rt2x00dev, MCU_LED, 0xff, arg0, arg1);
-}
-
-static void rt61pci_disable_led(struct rt2x00_dev *rt2x00dev)
-{
- u16 led_reg;
- u8 arg0;
- u8 arg1;
-
- led_reg = rt2x00dev->led_reg;
- rt2x00_set_field16(&led_reg, MCU_LEDCS_RADIO_STATUS, 0);
- rt2x00_set_field16(&led_reg, MCU_LEDCS_LINK_BG_STATUS, 0);
- rt2x00_set_field16(&led_reg, MCU_LEDCS_LINK_A_STATUS, 0);
-
- arg0 = led_reg & 0xff;
- arg1 = (led_reg >> 8) & 0xff;
-
- rt61pci_mcu_request(rt2x00dev, MCU_LED, 0xff, arg0, arg1);
-}
-
-static void rt61pci_activity_led(struct rt2x00_dev *rt2x00dev, int rssi)
-{
- u8 led;
-
- if (rt2x00dev->led_mode != LED_MODE_SIGNAL_STRENGTH)
- return;
-
- /*
- * Led handling requires a positive value for the rssi,
- * to do that correctly we need to add the correction.
- */
- rssi += rt2x00dev->rssi_offset;
-
- if (rssi <= 30)
- led = 0;
- else if (rssi <= 39)
- led = 1;
- else if (rssi <= 49)
- led = 2;
- else if (rssi <= 53)
- led = 3;
- else if (rssi <= 63)
- led = 4;
- else
- led = 5;
-
- rt61pci_mcu_request(rt2x00dev, MCU_LED_STRENGTH, 0xff, led, 0);
-}
-
-/*
* Link tuning
*/
static void rt61pci_link_stats(struct rt2x00_dev *rt2x00dev,
u8 up_bound;
u8 low_bound;
- /*
- * Update Led strength
- */
- rt61pci_activity_led(rt2x00dev, rssi);
-
rt61pci_bbp_read(rt2x00dev, 17, &r17);
/*
* Determine r17 bounds.
*/
- if (rt2x00dev->rx_status.phymode == MODE_IEEE80211A) {
+ if (rt2x00dev->rx_status.band == IEEE80211_BAND_5GHZ) {
low_bound = 0x28;
up_bound = 0x48;
if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) {
}
/*
+ * If we are not associated, we should go straight to the
+ * dynamic CCA tuning.
+ */
+ if (!rt2x00dev->intf_associated)
+ goto dynamic_cca_tune;
+
+ /*
* Special big-R17 for very short distance
*/
if (rssi >= -35) {
return;
}
+dynamic_cca_tune:
+
/*
* r17 does not yet exceed upper limit, continue and base
* the r17 tuning on the false CCA count.
}
/*
- * Firmware name function.
+ * Firmware functions
*/
static char *rt61pci_get_firmware_name(struct rt2x00_dev *rt2x00dev)
{
return fw_name;
}
-/*
- * Initialization functions.
- */
-static int rt61pci_load_firmware(struct rt2x00_dev *rt2x00dev, void *data,
+static u16 rt61pci_get_firmware_crc(const void *data, const size_t len)
+{
+ u16 crc;
+
+ /*
+ * Use the crc itu-t algorithm.
+ * The last 2 bytes in the firmware array are the crc checksum itself,
+ * this means that we should never pass those 2 bytes to the crc
+ * algorithm.
+ */
+ crc = crc_itu_t(0, data, len - 2);
+ crc = crc_itu_t_byte(crc, 0);
+ crc = crc_itu_t_byte(crc, 0);
+
+ return crc;
+}
+
+static int rt61pci_load_firmware(struct rt2x00_dev *rt2x00dev, const void *data,
const size_t len)
{
int i;
}
/*
+ * Hardware needs another millisecond before it is ready.
+ */
+ msleep(1);
+
+ /*
* Reset MAC and BBP registers.
*/
reg = 0;
return 0;
}
-static void rt61pci_init_rxring(struct rt2x00_dev *rt2x00dev)
+/*
+ * Initialization functions.
+ */
+static void rt61pci_init_rxentry(struct rt2x00_dev *rt2x00dev,
+ struct queue_entry *entry)
{
- struct data_ring *ring = rt2x00dev->rx;
- struct data_desc *rxd;
- unsigned int i;
+ struct queue_entry_priv_pci *entry_priv = entry->priv_data;
+ struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
u32 word;
- memset(ring->data_addr, 0x00, rt2x00_get_ring_size(ring));
-
- for (i = 0; i < ring->stats.limit; i++) {
- rxd = ring->entry[i].priv;
+ rt2x00_desc_read(entry_priv->desc, 5, &word);
+ rt2x00_set_field32(&word, RXD_W5_BUFFER_PHYSICAL_ADDRESS,
+ skbdesc->skb_dma);
+ rt2x00_desc_write(entry_priv->desc, 5, word);
- rt2x00_desc_read(rxd, 5, &word);
- rt2x00_set_field32(&word, RXD_W5_BUFFER_PHYSICAL_ADDRESS,
- ring->entry[i].data_dma);
- rt2x00_desc_write(rxd, 5, word);
-
- rt2x00_desc_read(rxd, 0, &word);
- rt2x00_set_field32(&word, RXD_W0_OWNER_NIC, 1);
- rt2x00_desc_write(rxd, 0, word);
- }
-
- rt2x00_ring_index_clear(rt2x00dev->rx);
+ rt2x00_desc_read(entry_priv->desc, 0, &word);
+ rt2x00_set_field32(&word, RXD_W0_OWNER_NIC, 1);
+ rt2x00_desc_write(entry_priv->desc, 0, word);
}
-static void rt61pci_init_txring(struct rt2x00_dev *rt2x00dev, const int queue)
+static void rt61pci_init_txentry(struct rt2x00_dev *rt2x00dev,
+ struct queue_entry *entry)
{
- struct data_ring *ring = rt2x00lib_get_ring(rt2x00dev, queue);
- struct data_desc *txd;
- unsigned int i;
+ struct queue_entry_priv_pci *entry_priv = entry->priv_data;
u32 word;
- memset(ring->data_addr, 0x00, rt2x00_get_ring_size(ring));
-
- for (i = 0; i < ring->stats.limit; i++) {
- txd = ring->entry[i].priv;
-
- rt2x00_desc_read(txd, 1, &word);
- rt2x00_set_field32(&word, TXD_W1_BUFFER_COUNT, 1);
- rt2x00_desc_write(txd, 1, word);
-
- rt2x00_desc_read(txd, 5, &word);
- rt2x00_set_field32(&word, TXD_W5_PID_TYPE, queue);
- rt2x00_set_field32(&word, TXD_W5_PID_SUBTYPE, i);
- rt2x00_desc_write(txd, 5, word);
-
- rt2x00_desc_read(txd, 6, &word);
- rt2x00_set_field32(&word, TXD_W6_BUFFER_PHYSICAL_ADDRESS,
- ring->entry[i].data_dma);
- rt2x00_desc_write(txd, 6, word);
-
- rt2x00_desc_read(txd, 0, &word);
- rt2x00_set_field32(&word, TXD_W0_VALID, 0);
- rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 0);
- rt2x00_desc_write(txd, 0, word);
- }
-
- rt2x00_ring_index_clear(ring);
+ rt2x00_desc_read(entry_priv->desc, 0, &word);
+ rt2x00_set_field32(&word, TXD_W0_VALID, 0);
+ rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 0);
+ rt2x00_desc_write(entry_priv->desc, 0, word);
}
-static int rt61pci_init_rings(struct rt2x00_dev *rt2x00dev)
+static int rt61pci_init_queues(struct rt2x00_dev *rt2x00dev)
{
+ struct queue_entry_priv_pci *entry_priv;
u32 reg;
/*
- * Initialize rings.
- */
- rt61pci_init_rxring(rt2x00dev);
- rt61pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_DATA0);
- rt61pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_DATA1);
- rt61pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_DATA2);
- rt61pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_DATA3);
- rt61pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_DATA4);
-
- /*
* Initialize registers.
*/
rt2x00pci_register_read(rt2x00dev, TX_RING_CSR0, ®);
rt2x00_set_field32(®, TX_RING_CSR0_AC0_RING_SIZE,
- rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].stats.limit);
+ rt2x00dev->tx[0].limit);
rt2x00_set_field32(®, TX_RING_CSR0_AC1_RING_SIZE,
- rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA1].stats.limit);
+ rt2x00dev->tx[1].limit);
rt2x00_set_field32(®, TX_RING_CSR0_AC2_RING_SIZE,
- rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA2].stats.limit);
+ rt2x00dev->tx[2].limit);
rt2x00_set_field32(®, TX_RING_CSR0_AC3_RING_SIZE,
- rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA3].stats.limit);
+ rt2x00dev->tx[3].limit);
rt2x00pci_register_write(rt2x00dev, TX_RING_CSR0, reg);
rt2x00pci_register_read(rt2x00dev, TX_RING_CSR1, ®);
- rt2x00_set_field32(®, TX_RING_CSR1_MGMT_RING_SIZE,
- rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA4].stats.limit);
rt2x00_set_field32(®, TX_RING_CSR1_TXD_SIZE,
- rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].desc_size /
- 4);
+ rt2x00dev->tx[0].desc_size / 4);
rt2x00pci_register_write(rt2x00dev, TX_RING_CSR1, reg);
+ entry_priv = rt2x00dev->tx[0].entries[0].priv_data;
rt2x00pci_register_read(rt2x00dev, AC0_BASE_CSR, ®);
rt2x00_set_field32(®, AC0_BASE_CSR_RING_REGISTER,
- rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].data_dma);
+ entry_priv->desc_dma);
rt2x00pci_register_write(rt2x00dev, AC0_BASE_CSR, reg);
+ entry_priv = rt2x00dev->tx[1].entries[0].priv_data;
rt2x00pci_register_read(rt2x00dev, AC1_BASE_CSR, ®);
rt2x00_set_field32(®, AC1_BASE_CSR_RING_REGISTER,
- rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA1].data_dma);
+ entry_priv->desc_dma);
rt2x00pci_register_write(rt2x00dev, AC1_BASE_CSR, reg);
+ entry_priv = rt2x00dev->tx[2].entries[0].priv_data;
rt2x00pci_register_read(rt2x00dev, AC2_BASE_CSR, ®);
rt2x00_set_field32(®, AC2_BASE_CSR_RING_REGISTER,
- rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA2].data_dma);
+ entry_priv->desc_dma);
rt2x00pci_register_write(rt2x00dev, AC2_BASE_CSR, reg);
+ entry_priv = rt2x00dev->tx[3].entries[0].priv_data;
rt2x00pci_register_read(rt2x00dev, AC3_BASE_CSR, ®);
rt2x00_set_field32(®, AC3_BASE_CSR_RING_REGISTER,
- rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA3].data_dma);
+ entry_priv->desc_dma);
rt2x00pci_register_write(rt2x00dev, AC3_BASE_CSR, reg);
- rt2x00pci_register_read(rt2x00dev, MGMT_BASE_CSR, ®);
- rt2x00_set_field32(®, MGMT_BASE_CSR_RING_REGISTER,
- rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA4].data_dma);
- rt2x00pci_register_write(rt2x00dev, MGMT_BASE_CSR, reg);
-
rt2x00pci_register_read(rt2x00dev, RX_RING_CSR, ®);
- rt2x00_set_field32(®, RX_RING_CSR_RING_SIZE,
- rt2x00dev->rx->stats.limit);
+ rt2x00_set_field32(®, RX_RING_CSR_RING_SIZE, rt2x00dev->rx->limit);
rt2x00_set_field32(®, RX_RING_CSR_RXD_SIZE,
rt2x00dev->rx->desc_size / 4);
rt2x00_set_field32(®, RX_RING_CSR_RXD_WRITEBACK_SIZE, 4);
rt2x00pci_register_write(rt2x00dev, RX_RING_CSR, reg);
+ entry_priv = rt2x00dev->rx->entries[0].priv_data;
rt2x00pci_register_read(rt2x00dev, RX_BASE_CSR, ®);
rt2x00_set_field32(®, RX_BASE_CSR_RING_REGISTER,
- rt2x00dev->rx->data_dma);
+ entry_priv->desc_dma);
rt2x00pci_register_write(rt2x00dev, RX_BASE_CSR, reg);
rt2x00pci_register_read(rt2x00dev, TX_DMA_DST_CSR, ®);
rt2x00_set_field32(®, TX_DMA_DST_CSR_DEST_AC1, 2);
rt2x00_set_field32(®, TX_DMA_DST_CSR_DEST_AC2, 2);
rt2x00_set_field32(®, TX_DMA_DST_CSR_DEST_AC3, 2);
- rt2x00_set_field32(®, TX_DMA_DST_CSR_DEST_MGMT, 0);
rt2x00pci_register_write(rt2x00dev, TX_DMA_DST_CSR, reg);
rt2x00pci_register_read(rt2x00dev, LOAD_TX_RING_CSR, ®);
rt2x00_set_field32(®, LOAD_TX_RING_CSR_LOAD_TXD_AC1, 1);
rt2x00_set_field32(®, LOAD_TX_RING_CSR_LOAD_TXD_AC2, 1);
rt2x00_set_field32(®, LOAD_TX_RING_CSR_LOAD_TXD_AC3, 1);
- rt2x00_set_field32(®, LOAD_TX_RING_CSR_LOAD_TXD_MGMT, 1);
rt2x00pci_register_write(rt2x00dev, LOAD_TX_RING_CSR, reg);
rt2x00pci_register_read(rt2x00dev, RX_CNTL_CSR, ®);
rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_54MBS, 42);
rt2x00pci_register_write(rt2x00dev, TXRX_CSR8, reg);
+ rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, ®);
+ rt2x00_set_field32(®, TXRX_CSR9_BEACON_INTERVAL, 0);
+ rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 0);
+ rt2x00_set_field32(®, TXRX_CSR9_TSF_SYNC, 0);
+ rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 0);
+ rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0);
+ rt2x00_set_field32(®, TXRX_CSR9_TIMESTAMP_COMPENSATE, 0);
+ rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
+
rt2x00pci_register_write(rt2x00dev, TXRX_CSR15, 0x0000000f);
rt2x00pci_register_write(rt2x00dev, MAC_CSR6, 0x00000fff);
rt2x00pci_register_write(rt2x00dev, M2H_CMD_DONE_CSR, 0xffffffff);
- rt2x00pci_register_read(rt2x00dev, AC_TXOP_CSR0, ®);
- rt2x00_set_field32(®, AC_TXOP_CSR0_AC0_TX_OP, 0);
- rt2x00_set_field32(®, AC_TXOP_CSR0_AC1_TX_OP, 0);
- rt2x00pci_register_write(rt2x00dev, AC_TXOP_CSR0, reg);
-
- rt2x00pci_register_read(rt2x00dev, AC_TXOP_CSR1, ®);
- rt2x00_set_field32(®, AC_TXOP_CSR1_AC2_TX_OP, 192);
- rt2x00_set_field32(®, AC_TXOP_CSR1_AC3_TX_OP, 48);
- rt2x00pci_register_write(rt2x00dev, AC_TXOP_CSR1, reg);
+ /*
+ * Clear all beacons
+ * For the Beacon base registers we only need to clear
+ * the first byte since that byte contains the VALID and OWNER
+ * bits which (when set to 0) will invalidate the entire beacon.
+ */
+ rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE0, 0);
+ rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE1, 0);
+ rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE2, 0);
+ rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE3, 0);
/*
* We must clear the error counters.
return 0;
}
-static int rt61pci_init_bbp(struct rt2x00_dev *rt2x00dev)
+static int rt61pci_wait_bbp_ready(struct rt2x00_dev *rt2x00dev)
{
unsigned int i;
- u16 eeprom;
- u8 reg_id;
u8 value;
for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
rt61pci_bbp_read(rt2x00dev, 0, &value);
if ((value != 0xff) && (value != 0x00))
- goto continue_csr_init;
- NOTICE(rt2x00dev, "Waiting for BBP register.\n");
+ return 0;
udelay(REGISTER_BUSY_DELAY);
}
ERROR(rt2x00dev, "BBP register access failed, aborting.\n");
return -EACCES;
+}
+
+static int rt61pci_init_bbp(struct rt2x00_dev *rt2x00dev)
+{
+ unsigned int i;
+ u16 eeprom;
+ u8 reg_id;
+ u8 value;
+
+ if (unlikely(rt61pci_wait_bbp_ready(rt2x00dev)))
+ return -EACCES;
-continue_csr_init:
rt61pci_bbp_write(rt2x00dev, 3, 0x00);
rt61pci_bbp_write(rt2x00dev, 15, 0x30);
rt61pci_bbp_write(rt2x00dev, 21, 0xc8);
rt61pci_bbp_write(rt2x00dev, 102, 0x16);
rt61pci_bbp_write(rt2x00dev, 107, 0x04);
- DEBUG(rt2x00dev, "Start initialization from EEPROM...\n");
for (i = 0; i < EEPROM_BBP_SIZE; i++) {
rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
if (eeprom != 0xffff && eeprom != 0x0000) {
reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
- DEBUG(rt2x00dev, "BBP: 0x%02x, value: 0x%02x.\n",
- reg_id, value);
rt61pci_bbp_write(rt2x00dev, reg_id, value);
}
}
- DEBUG(rt2x00dev, "...End initialization from EEPROM.\n");
return 0;
}
rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, ®);
rt2x00_set_field32(®, TXRX_CSR0_DISABLE_RX,
- state == STATE_RADIO_RX_OFF);
+ (state == STATE_RADIO_RX_OFF) ||
+ (state == STATE_RADIO_RX_OFF_LINK));
rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg);
}
/*
* Initialize all registers.
*/
- if (rt61pci_init_rings(rt2x00dev) ||
- rt61pci_init_registers(rt2x00dev) ||
- rt61pci_init_bbp(rt2x00dev)) {
- ERROR(rt2x00dev, "Register initialization failed.\n");
+ if (unlikely(rt61pci_init_queues(rt2x00dev) ||
+ rt61pci_init_registers(rt2x00dev) ||
+ rt61pci_init_bbp(rt2x00dev)))
return -EIO;
- }
-
- /*
- * Enable interrupts.
- */
- rt61pci_toggle_irq(rt2x00dev, STATE_RADIO_IRQ_ON);
/*
* Enable RX.
rt2x00_set_field32(®, RX_CNTL_CSR_ENABLE_RX_DMA, 1);
rt2x00pci_register_write(rt2x00dev, RX_CNTL_CSR, reg);
- /*
- * Enable LED
- */
- rt61pci_enable_led(rt2x00dev);
-
return 0;
}
{
u32 reg;
- /*
- * Disable LED
- */
- rt61pci_disable_led(rt2x00dev);
-
rt2x00pci_register_write(rt2x00dev, MAC_CSR10, 0x00001818);
/*
rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_AC1, 1);
rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_AC2, 1);
rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_AC3, 1);
- rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_MGMT, 1);
rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg);
-
- /*
- * Disable interrupts.
- */
- rt61pci_toggle_irq(rt2x00dev, STATE_RADIO_IRQ_OFF);
}
static int rt61pci_set_state(struct rt2x00_dev *rt2x00dev, enum dev_state state)
u32 reg;
unsigned int i;
char put_to_sleep;
- char current_state;
put_to_sleep = (state != STATE_AWAKE);
*/
for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
rt2x00pci_register_read(rt2x00dev, MAC_CSR12, ®);
- current_state =
- rt2x00_get_field32(reg, MAC_CSR12_BBP_CURRENT_STATE);
- if (current_state == !put_to_sleep)
+ state = rt2x00_get_field32(reg, MAC_CSR12_BBP_CURRENT_STATE);
+ if (state == !put_to_sleep)
return 0;
msleep(10);
}
- NOTICE(rt2x00dev, "Device failed to enter state %d, "
- "current device state %d.\n", !put_to_sleep, current_state);
-
return -EBUSY;
}
rt61pci_disable_radio(rt2x00dev);
break;
case STATE_RADIO_RX_ON:
+ case STATE_RADIO_RX_ON_LINK:
case STATE_RADIO_RX_OFF:
+ case STATE_RADIO_RX_OFF_LINK:
rt61pci_toggle_rx(rt2x00dev, state);
break;
+ case STATE_RADIO_IRQ_ON:
+ case STATE_RADIO_IRQ_OFF:
+ rt61pci_toggle_irq(rt2x00dev, state);
+ break;
case STATE_DEEP_SLEEP:
case STATE_SLEEP:
case STATE_STANDBY:
break;
}
+ if (unlikely(retval))
+ ERROR(rt2x00dev, "Device failed to enter state %d (%d).\n",
+ state, retval);
+
return retval;
}
* TX descriptor initialization
*/
static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
- struct data_desc *txd,
- struct txdata_entry_desc *desc,
- struct ieee80211_hdr *ieee80211hdr,
- unsigned int length,
- struct ieee80211_tx_control *control)
+ struct sk_buff *skb,
+ struct txentry_desc *txdesc)
{
+ struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
+ __le32 *txd = skbdesc->desc;
u32 word;
/*
* Start writing the descriptor words.
*/
rt2x00_desc_read(txd, 1, &word);
- rt2x00_set_field32(&word, TXD_W1_HOST_Q_ID, desc->queue);
- rt2x00_set_field32(&word, TXD_W1_AIFSN, desc->aifs);
- rt2x00_set_field32(&word, TXD_W1_CWMIN, desc->cw_min);
- rt2x00_set_field32(&word, TXD_W1_CWMAX, desc->cw_max);
- rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER);
- rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, 1);
+ rt2x00_set_field32(&word, TXD_W1_HOST_Q_ID, txdesc->queue);
+ rt2x00_set_field32(&word, TXD_W1_AIFSN, txdesc->aifs);
+ rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min);
+ rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max);
+ rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, txdesc->iv_offset);
+ rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE,
+ test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
+ rt2x00_set_field32(&word, TXD_W1_BUFFER_COUNT, 1);
rt2x00_desc_write(txd, 1, word);
rt2x00_desc_read(txd, 2, &word);
- rt2x00_set_field32(&word, TXD_W2_PLCP_SIGNAL, desc->signal);
- rt2x00_set_field32(&word, TXD_W2_PLCP_SERVICE, desc->service);
- rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_LOW, desc->length_low);
- rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, desc->length_high);
+ rt2x00_set_field32(&word, TXD_W2_PLCP_SIGNAL, txdesc->signal);
+ rt2x00_set_field32(&word, TXD_W2_PLCP_SERVICE, txdesc->service);
+ rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_LOW, txdesc->length_low);
+ rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, txdesc->length_high);
rt2x00_desc_write(txd, 2, word);
+ if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags)) {
+ _rt2x00_desc_write(txd, 3, skbdesc->iv);
+ _rt2x00_desc_write(txd, 4, skbdesc->eiv);
+ }
+
rt2x00_desc_read(txd, 5, &word);
+ rt2x00_set_field32(&word, TXD_W5_PID_TYPE, skbdesc->entry->queue->qid);
+ rt2x00_set_field32(&word, TXD_W5_PID_SUBTYPE,
+ skbdesc->entry->entry_idx);
rt2x00_set_field32(&word, TXD_W5_TX_POWER,
- TXPOWER_TO_DEV(control->power_level));
+ TXPOWER_TO_DEV(rt2x00dev->tx_power));
rt2x00_set_field32(&word, TXD_W5_WAITING_DMA_DONE_INT, 1);
rt2x00_desc_write(txd, 5, word);
- rt2x00_desc_read(txd, 11, &word);
- rt2x00_set_field32(&word, TXD_W11_BUFFER_LENGTH0, length);
- rt2x00_desc_write(txd, 11, word);
+ rt2x00_desc_read(txd, 6, &word);
+ rt2x00_set_field32(&word, TXD_W6_BUFFER_PHYSICAL_ADDRESS,
+ skbdesc->skb_dma);
+ rt2x00_desc_write(txd, 6, word);
+
+ if (skbdesc->desc_len > TXINFO_SIZE) {
+ rt2x00_desc_read(txd, 11, &word);
+ rt2x00_set_field32(&word, TXD_W11_BUFFER_LENGTH0, skb->len);
+ rt2x00_desc_write(txd, 11, word);
+ }
rt2x00_desc_read(txd, 0, &word);
rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 1);
rt2x00_set_field32(&word, TXD_W0_VALID, 1);
rt2x00_set_field32(&word, TXD_W0_MORE_FRAG,
- test_bit(ENTRY_TXD_MORE_FRAG, &desc->flags));
+ test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
rt2x00_set_field32(&word, TXD_W0_ACK,
- !(control->flags & IEEE80211_TXCTL_NO_ACK));
+ test_bit(ENTRY_TXD_ACK, &txdesc->flags));
rt2x00_set_field32(&word, TXD_W0_TIMESTAMP,
- test_bit(ENTRY_TXD_REQ_TIMESTAMP, &desc->flags));
+ test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags));
rt2x00_set_field32(&word, TXD_W0_OFDM,
- test_bit(ENTRY_TXD_OFDM_RATE, &desc->flags));
- rt2x00_set_field32(&word, TXD_W0_IFS, desc->ifs);
+ test_bit(ENTRY_TXD_OFDM_RATE, &txdesc->flags));
+ rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs);
rt2x00_set_field32(&word, TXD_W0_RETRY_MODE,
- !!(control->flags &
- IEEE80211_TXCTL_LONG_RETRY_LIMIT));
- rt2x00_set_field32(&word, TXD_W0_TKIP_MIC, 0);
- rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, length);
+ test_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags));
+ rt2x00_set_field32(&word, TXD_W0_TKIP_MIC,
+ test_bit(ENTRY_TXD_ENCRYPT_MMIC, &txdesc->flags));
+ rt2x00_set_field32(&word, TXD_W0_KEY_TABLE,
+ test_bit(ENTRY_TXD_ENCRYPT_PAIRWISE, &txdesc->flags));
+ rt2x00_set_field32(&word, TXD_W0_KEY_INDEX, txdesc->key_idx);
+ rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skb->len);
rt2x00_set_field32(&word, TXD_W0_BURST,
- test_bit(ENTRY_TXD_BURST, &desc->flags));
- rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE);
+ test_bit(ENTRY_TXD_BURST, &txdesc->flags));
+ rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, txdesc->cipher);
rt2x00_desc_write(txd, 0, word);
}
/*
* TX data initialization
*/
+static void rt61pci_write_beacon(struct queue_entry *entry)
+{
+ struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
+ struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
+ unsigned int beacon_base;
+ u32 reg;
+
+ /*
+ * Disable beaconing while we are reloading the beacon data,
+ * otherwise we might be sending out invalid data.
+ */
+ rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, ®);
+ rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 0);
+ rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 0);
+ rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0);
+ rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
+
+ /*
+ * Write entire beacon with descriptor to register.
+ */
+ beacon_base = HW_BEACON_OFFSET(entry->entry_idx);
+ rt2x00pci_register_multiwrite(rt2x00dev,
+ beacon_base,
+ skbdesc->desc, skbdesc->desc_len);
+ rt2x00pci_register_multiwrite(rt2x00dev,
+ beacon_base + skbdesc->desc_len,
+ entry->skb->data, entry->skb->len);
+
+ /*
+ * Clean up beacon skb.
+ */
+ dev_kfree_skb_any(entry->skb);
+ entry->skb = NULL;
+}
+
static void rt61pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
- unsigned int queue)
+ const enum data_queue_qid queue)
{
u32 reg;
- if (queue == IEEE80211_TX_QUEUE_BEACON) {
+ if (queue == QID_BEACON) {
/*
* For Wi-Fi faily generated beacons between participating
* stations. Set TBTT phase adaptive adjustment step to 8us.
rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, ®);
if (!rt2x00_get_field32(reg, TXRX_CSR9_BEACON_GEN)) {
+ rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 1);
+ rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 1);
rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 1);
rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
}
}
rt2x00pci_register_read(rt2x00dev, TX_CNTL_CSR, ®);
- if (queue == IEEE80211_TX_QUEUE_DATA0)
- rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC0, 1);
- else if (queue == IEEE80211_TX_QUEUE_DATA1)
- rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC1, 1);
- else if (queue == IEEE80211_TX_QUEUE_DATA2)
- rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC2, 1);
- else if (queue == IEEE80211_TX_QUEUE_DATA3)
- rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC3, 1);
- else if (queue == IEEE80211_TX_QUEUE_DATA4)
- rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_MGMT, 1);
+ rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC0, (queue == QID_AC_BE));
+ rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC1, (queue == QID_AC_BK));
+ rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC2, (queue == QID_AC_VI));
+ rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC3, (queue == QID_AC_VO));
rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg);
}
*/
static int rt61pci_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1)
{
- u16 eeprom;
- u8 offset;
+ u8 offset = rt2x00dev->lna_gain;
u8 lna;
lna = rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_LNA);
switch (lna) {
case 3:
- offset = 90;
+ offset += 90;
break;
case 2:
- offset = 74;
+ offset += 74;
break;
case 1:
- offset = 64;
+ offset += 64;
break;
default:
return 0;
}
- if (rt2x00dev->rx_status.phymode == MODE_IEEE80211A) {
- if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags))
- offset += 14;
-
+ if (rt2x00dev->rx_status.band == IEEE80211_BAND_5GHZ) {
if (lna == 3 || lna == 2)
offset += 10;
-
- rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom);
- offset -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_A_1);
- } else {
- if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags))
- offset += 14;
-
- rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom);
- offset -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1);
}
return rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_AGC) * 2 - offset;
}
-static void rt61pci_fill_rxdone(struct data_entry *entry,
- struct rxdata_entry_desc *desc)
+static void rt61pci_fill_rxdone(struct queue_entry *entry,
+ struct rxdone_entry_desc *rxdesc)
{
- struct data_desc *rxd = entry->priv;
+ struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
+ struct queue_entry_priv_pci *entry_priv = entry->priv_data;
u32 word0;
u32 word1;
- rt2x00_desc_read(rxd, 0, &word0);
- rt2x00_desc_read(rxd, 1, &word1);
+ rt2x00_desc_read(entry_priv->desc, 0, &word0);
+ rt2x00_desc_read(entry_priv->desc, 1, &word1);
- desc->flags = 0;
if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR))
- desc->flags |= RX_FLAG_FAILED_FCS_CRC;
+ rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
+
+ if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) {
+ rxdesc->cipher =
+ rt2x00_get_field32(word0, RXD_W0_CIPHER_ALG);
+ rxdesc->cipher_status =
+ rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR);
+ }
+
+ if (rxdesc->cipher != CIPHER_NONE) {
+ _rt2x00_desc_read(entry_priv->desc, 2, &rxdesc->iv);
+ _rt2x00_desc_read(entry_priv->desc, 3, &rxdesc->eiv);
+ _rt2x00_desc_read(entry_priv->desc, 4, &rxdesc->icv);
+
+ /*
+ * Hardware has stripped IV/EIV data from 802.11 frame during
+ * decryption. It has provided the data seperately but rt2x00lib
+ * should decide if it should be reinserted.
+ */
+ rxdesc->flags |= RX_FLAG_IV_STRIPPED;
+
+ /*
+ * FIXME: Legacy driver indicates that the frame does
+ * contain the Michael Mic. Unfortunately, in rt2x00
+ * the MIC seems to be missing completely...
+ */
+ rxdesc->flags |= RX_FLAG_MMIC_STRIPPED;
+
+ if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS)
+ rxdesc->flags |= RX_FLAG_DECRYPTED;
+ else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC)
+ rxdesc->flags |= RX_FLAG_MMIC_ERROR;
+ }
/*
* Obtain the status about this packet.
+ * When frame was received with an OFDM bitrate,
+ * the signal is the PLCP value. If it was received with
+ * a CCK bitrate the signal is the rate in 100kbit/s.
*/
- desc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL);
- desc->rssi = rt61pci_agc_to_rssi(entry->ring->rt2x00dev, word1);
- desc->ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM);
- desc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
+ rxdesc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL);
+ rxdesc->rssi = rt61pci_agc_to_rssi(rt2x00dev, word1);
+ rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
- return;
+ if (rt2x00_get_field32(word0, RXD_W0_OFDM))
+ rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP;
+ else
+ rxdesc->dev_flags |= RXDONE_SIGNAL_BITRATE;
+ if (rt2x00_get_field32(word0, RXD_W0_MY_BSS))
+ rxdesc->dev_flags |= RXDONE_MY_BSS;
}
/*
*/
static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev)
{
- struct data_ring *ring;
- struct data_entry *entry;
- struct data_entry *entry_done;
- struct data_desc *txd;
+ struct data_queue *queue;
+ struct queue_entry *entry;
+ struct queue_entry *entry_done;
+ struct queue_entry_priv_pci *entry_priv;
+ struct txdone_entry_desc txdesc;
u32 word;
u32 reg;
u32 old_reg;
int type;
int index;
- int tx_status;
- int retry;
/*
* During each loop we will compare the freshly read
/*
* Skip this entry when it contains an invalid
- * ring identication number.
+ * queue identication number.
*/
type = rt2x00_get_field32(reg, STA_CSR4_PID_TYPE);
- ring = rt2x00lib_get_ring(rt2x00dev, type);
- if (unlikely(!ring))
+ queue = rt2x00queue_get_queue(rt2x00dev, type);
+ if (unlikely(!queue))
continue;
/*
* index number.
*/
index = rt2x00_get_field32(reg, STA_CSR4_PID_SUBTYPE);
- if (unlikely(index >= ring->stats.limit))
+ if (unlikely(index >= queue->limit))
continue;
- entry = &ring->entry[index];
- txd = entry->priv;
- rt2x00_desc_read(txd, 0, &word);
+ entry = &queue->entries[index];
+ entry_priv = entry->priv_data;
+ rt2x00_desc_read(entry_priv->desc, 0, &word);
if (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) ||
!rt2x00_get_field32(word, TXD_W0_VALID))
return;
- entry_done = rt2x00_get_data_entry_done(ring);
+ entry_done = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
while (entry != entry_done) {
- /* Catch up. Just report any entries we missed as
- * failed. */
+ /* Catch up.
+ * Just report any entries we missed as failed.
+ */
WARNING(rt2x00dev,
- "TX status report missed for entry %p\n",
- entry_done);
- rt2x00lib_txdone(entry_done, TX_FAIL_OTHER, 0);
- entry_done = rt2x00_get_data_entry_done(ring);
- }
+ "TX status report missed for entry %d\n",
+ entry_done->entry_idx);
- /*
- * Obtain the status about this packet.
- */
- tx_status = rt2x00_get_field32(reg, STA_CSR4_TX_RESULT);
- retry = rt2x00_get_field32(reg, STA_CSR4_RETRY_COUNT);
+ txdesc.flags = 0;
+ __set_bit(TXDONE_UNKNOWN, &txdesc.flags);
+ txdesc.retry = 0;
- rt2x00lib_txdone(entry, tx_status, retry);
+ rt2x00lib_txdone(entry_done, &txdesc);
+ entry_done = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
+ }
/*
- * Make this entry available for reuse.
+ * Obtain the status about this packet.
*/
- entry->flags = 0;
- rt2x00_set_field32(&word, TXD_W0_VALID, 0);
- rt2x00_desc_write(txd, 0, word);
- rt2x00_ring_index_done_inc(entry->ring);
+ txdesc.flags = 0;
+ switch (rt2x00_get_field32(reg, STA_CSR4_TX_RESULT)) {
+ case 0: /* Success, maybe with retry */
+ __set_bit(TXDONE_SUCCESS, &txdesc.flags);
+ break;
+ case 6: /* Failure, excessive retries */
+ __set_bit(TXDONE_EXCESSIVE_RETRY, &txdesc.flags);
+ /* Don't break, this is a failed frame! */
+ default: /* Failure */
+ __set_bit(TXDONE_FAILURE, &txdesc.flags);
+ }
+ txdesc.retry = rt2x00_get_field32(reg, STA_CSR4_RETRY_COUNT);
- /*
- * If the data ring was full before the txdone handler
- * we must make sure the packet queue in the mac80211 stack
- * is reenabled when the txdone handler has finished.
- */
- if (!rt2x00_ring_full(ring))
- ieee80211_wake_queue(rt2x00dev->hw,
- entry->tx_status.control.queue);
+ rt2x00lib_txdone(entry, &txdesc);
}
}
if (!reg && !reg_mcu)
return IRQ_NONE;
- if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
+ if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
return IRQ_HANDLED;
/*
rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word);
if (word == 0xffff) {
rt2x00_set_field16(&word, EEPROM_ANTENNA_NUM, 2);
- rt2x00_set_field16(&word, EEPROM_ANTENNA_TX_DEFAULT, 2);
- rt2x00_set_field16(&word, EEPROM_ANTENNA_RX_DEFAULT, 2);
+ rt2x00_set_field16(&word, EEPROM_ANTENNA_TX_DEFAULT,
+ ANTENNA_B);
+ rt2x00_set_field16(&word, EEPROM_ANTENNA_RX_DEFAULT,
+ ANTENNA_B);
rt2x00_set_field16(&word, EEPROM_ANTENNA_FRAME_TYPE, 0);
rt2x00_set_field16(&word, EEPROM_ANTENNA_DYN_TXAGC, 0);
rt2x00_set_field16(&word, EEPROM_ANTENNA_HARDWARE_RADIO, 0);
rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_1, 0);
rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_2, 0);
rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_A, word);
- EEPROM(rt2x00dev, "RSSI OFFSET BG: 0x%04x\n", word);
+ EEPROM(rt2x00dev, "RSSI OFFSET A: 0x%04x\n", word);
} else {
value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_A_1);
if (value < -10 || value > 10)
* To determine the RT chip we have to read the
* PCI header of the device.
*/
- pci_read_config_word(rt2x00dev_pci(rt2x00dev),
+ pci_read_config_word(to_pci_dev(rt2x00dev->dev),
PCI_CONFIG_HEADER_DEVICE, &device);
value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
rt2x00pci_register_read(rt2x00dev, MAC_CSR0, ®);
}
/*
+ * Determine number of antenna's.
+ */
+ if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_NUM) == 2)
+ __set_bit(CONFIG_DOUBLE_ANTENNA, &rt2x00dev->flags);
+
+ /*
* Identify default antenna configuration.
*/
- rt2x00dev->hw->conf.antenna_sel_tx =
+ rt2x00dev->default_ant.tx =
rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT);
- rt2x00dev->hw->conf.antenna_sel_rx =
+ rt2x00dev->default_ant.rx =
rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT);
/*
__set_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags);
/*
- * Determine number of antenna's.
- */
- if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_NUM) == 2)
- __set_bit(CONFIG_DOUBLE_ANTENNA, &rt2x00dev->flags);
-
- /*
* Detect if this device has an hardware controlled radio.
*/
-#ifdef CONFIG_RT61PCI_RFKILL
+#ifdef CONFIG_RT2X00_LIB_RFKILL
if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
__set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
-#endif /* CONFIG_RT61PCI_RFKILL */
+#endif /* CONFIG_RT2X00_LIB_RFKILL */
/*
* Read frequency offset and RF programming sequence.
__set_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags);
/*
+ * When working with a RF2529 chip without double antenna
+ * the antenna settings should be gathered from the NIC
+ * eeprom word.
+ */
+ if (rt2x00_rf(&rt2x00dev->chip, RF2529) &&
+ !test_bit(CONFIG_DOUBLE_ANTENNA, &rt2x00dev->flags)) {
+ switch (rt2x00_get_field16(eeprom, EEPROM_NIC_TX_RX_FIXED)) {
+ case 0:
+ rt2x00dev->default_ant.tx = ANTENNA_B;
+ rt2x00dev->default_ant.rx = ANTENNA_A;
+ break;
+ case 1:
+ rt2x00dev->default_ant.tx = ANTENNA_B;
+ rt2x00dev->default_ant.rx = ANTENNA_B;
+ break;
+ case 2:
+ rt2x00dev->default_ant.tx = ANTENNA_A;
+ rt2x00dev->default_ant.rx = ANTENNA_A;
+ break;
+ case 3:
+ rt2x00dev->default_ant.tx = ANTENNA_A;
+ rt2x00dev->default_ant.rx = ANTENNA_B;
+ break;
+ }
+
+ if (rt2x00_get_field16(eeprom, EEPROM_NIC_TX_DIVERSITY))
+ rt2x00dev->default_ant.tx = ANTENNA_SW_DIVERSITY;
+ if (rt2x00_get_field16(eeprom, EEPROM_NIC_ENABLE_DIVERSITY))
+ rt2x00dev->default_ant.rx = ANTENNA_SW_DIVERSITY;
+ }
+
+ /*
* Store led settings, for correct led behaviour.
* If the eeprom value is invalid,
* switch to default led mode.
*/
+#ifdef CONFIG_RT2X00_LIB_LEDS
rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &eeprom);
+ value = rt2x00_get_field16(eeprom, EEPROM_LED_LED_MODE);
- rt2x00dev->led_mode = rt2x00_get_field16(eeprom, EEPROM_LED_LED_MODE);
+ rt61pci_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
+ rt61pci_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC);
+ if (value == LED_MODE_SIGNAL_STRENGTH)
+ rt61pci_init_led(rt2x00dev, &rt2x00dev->led_qual,
+ LED_TYPE_QUALITY);
- rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LED_MODE,
- rt2x00dev->led_mode);
- rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_0,
+ rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_LED_MODE, value);
+ rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_0,
rt2x00_get_field16(eeprom,
EEPROM_LED_POLARITY_GPIO_0));
- rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_1,
+ rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_1,
rt2x00_get_field16(eeprom,
EEPROM_LED_POLARITY_GPIO_1));
- rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_2,
+ rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_2,
rt2x00_get_field16(eeprom,
EEPROM_LED_POLARITY_GPIO_2));
- rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_3,
+ rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_3,
rt2x00_get_field16(eeprom,
EEPROM_LED_POLARITY_GPIO_3));
- rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_4,
+ rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_4,
rt2x00_get_field16(eeprom,
EEPROM_LED_POLARITY_GPIO_4));
- rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_ACT,
+ rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_ACT,
rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_ACT));
- rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_READY_BG,
+ rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_READY_BG,
rt2x00_get_field16(eeprom,
EEPROM_LED_POLARITY_RDY_G));
- rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_READY_A,
+ rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_READY_A,
rt2x00_get_field16(eeprom,
EEPROM_LED_POLARITY_RDY_A));
+#endif /* CONFIG_RT2X00_LIB_LEDS */
return 0;
}
{ 46, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000c0a23 },
};
-static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
+static int rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
{
struct hw_mode_spec *spec = &rt2x00dev->spec;
- u8 *txpower;
+ struct channel_info *info;
+ char *tx_power;
unsigned int i;
/*
* Initialize all hw fields.
*/
rt2x00dev->hw->flags =
- IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
- IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING;
+ IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
+ IEEE80211_HW_SIGNAL_DBM;
rt2x00dev->hw->extra_tx_headroom = 0;
- rt2x00dev->hw->max_signal = MAX_SIGNAL;
- rt2x00dev->hw->max_rssi = MAX_RX_SSI;
- rt2x00dev->hw->queues = 5;
- SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_pci(rt2x00dev)->dev);
+ SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
rt2x00_eeprom_addr(rt2x00dev,
EEPROM_MAC_ADDR_0));
/*
- * Convert tx_power array in eeprom.
- */
- txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START);
- for (i = 0; i < 14; i++)
- txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
-
- /*
* Initialize hw_mode information.
*/
- spec->num_modes = 2;
- spec->num_rates = 12;
- spec->tx_power_a = NULL;
- spec->tx_power_bg = txpower;
- spec->tx_power_default = DEFAULT_TXPOWER;
+ spec->supported_bands = SUPPORT_BAND_2GHZ;
+ spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
if (!test_bit(CONFIG_RF_SEQUENCE, &rt2x00dev->flags)) {
spec->num_channels = 14;
if (rt2x00_rf(&rt2x00dev->chip, RF5225) ||
rt2x00_rf(&rt2x00dev->chip, RF5325)) {
- spec->num_modes = 3;
+ spec->supported_bands |= SUPPORT_BAND_5GHZ;
spec->num_channels = ARRAY_SIZE(rf_vals_seq);
+ }
- txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
- for (i = 0; i < 14; i++)
- txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
+ /*
+ * Create channel information array
+ */
+ info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
- spec->tx_power_a = txpower;
+ spec->channels_info = info;
+
+ tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START);
+ for (i = 0; i < 14; i++)
+ info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
+
+ if (spec->num_channels > 14) {
+ tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
+ for (i = 14; i < spec->num_channels; i++)
+ info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
}
+
+ return 0;
}
static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev)
/*
* Initialize hw specifications.
*/
- rt61pci_probe_hw_mode(rt2x00dev);
+ retval = rt61pci_probe_hw_mode(rt2x00dev);
+ if (retval)
+ return retval;
/*
- * This device requires firmware
+ * This device requires firmware and DMA mapped skbs.
*/
__set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
+ __set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags);
+ if (!modparam_nohwcrypt)
+ __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
/*
* Set the rssi offset.
/*
* IEEE80211 stack callback functions.
*/
-static void rt61pci_configure_filter(struct ieee80211_hw *hw,
- unsigned int changed_flags,
- unsigned int *total_flags,
- int mc_count,
- struct dev_addr_list *mc_list)
-{
- struct rt2x00_dev *rt2x00dev = hw->priv;
- struct interface *intf = &rt2x00dev->interface;
- u32 reg;
-
- /*
- * Mask off any flags we are going to ignore from
- * the total_flags field.
- */
- *total_flags &=
- FIF_ALLMULTI |
- FIF_FCSFAIL |
- FIF_PLCPFAIL |
- FIF_CONTROL |
- FIF_OTHER_BSS |
- FIF_PROMISC_IN_BSS;
-
- /*
- * Apply some rules to the filters:
- * - Some filters imply different filters to be set.
- * - Some things we can't filter out at all.
- * - Some filters are set based on interface type.
- */
- if (mc_count)
- *total_flags |= FIF_ALLMULTI;
- if (*total_flags & FIF_OTHER_BSS ||
- *total_flags & FIF_PROMISC_IN_BSS)
- *total_flags |= FIF_PROMISC_IN_BSS | FIF_OTHER_BSS;
- if (is_interface_type(intf, IEEE80211_IF_TYPE_AP))
- *total_flags |= FIF_PROMISC_IN_BSS;
-
- /*
- * Check if there is any work left for us.
- */
- if (intf->filter == *total_flags)
- return;
- intf->filter = *total_flags;
-
- /*
- * Start configuration steps.
- * Note that the version error will always be dropped
- * and broadcast frames will always be accepted since
- * there is no filter for it at this time.
- */
- rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, ®);
- rt2x00_set_field32(®, TXRX_CSR0_DROP_CRC,
- !(*total_flags & FIF_FCSFAIL));
- rt2x00_set_field32(®, TXRX_CSR0_DROP_PHYSICAL,
- !(*total_flags & FIF_PLCPFAIL));
- rt2x00_set_field32(®, TXRX_CSR0_DROP_CONTROL,
- !(*total_flags & FIF_CONTROL));
- rt2x00_set_field32(®, TXRX_CSR0_DROP_NOT_TO_ME,
- !(*total_flags & FIF_PROMISC_IN_BSS));
- rt2x00_set_field32(®, TXRX_CSR0_DROP_TO_DS,
- !(*total_flags & FIF_PROMISC_IN_BSS));
- rt2x00_set_field32(®, TXRX_CSR0_DROP_VERSION_ERROR, 1);
- rt2x00_set_field32(®, TXRX_CSR0_DROP_MULTICAST,
- !(*total_flags & FIF_ALLMULTI));
- rt2x00_set_field32(®, TXRX_CSR0_DROP_BORADCAST, 0);
- rt2x00_set_field32(®, TXRX_CSR0_DROP_ACK_CTS, 1);
- rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg);
-}
-
static int rt61pci_set_retry_limit(struct ieee80211_hw *hw,
u32 short_retry, u32 long_retry)
{
return 0;
}
-static u64 rt61pci_get_tsf(struct ieee80211_hw *hw)
+static int rt61pci_conf_tx(struct ieee80211_hw *hw, u16 queue_idx,
+ const struct ieee80211_tx_queue_params *params)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
- u64 tsf;
+ struct data_queue *queue;
+ struct rt2x00_field32 field;
+ int retval;
u32 reg;
- rt2x00pci_register_read(rt2x00dev, TXRX_CSR13, ®);
- tsf = (u64) rt2x00_get_field32(reg, TXRX_CSR13_HIGH_TSFTIMER) << 32;
- rt2x00pci_register_read(rt2x00dev, TXRX_CSR12, ®);
- tsf |= rt2x00_get_field32(reg, TXRX_CSR12_LOW_TSFTIMER);
-
- return tsf;
-}
+ /*
+ * First pass the configuration through rt2x00lib, that will
+ * update the queue settings and validate the input. After that
+ * we are free to update the registers based on the value
+ * in the queue parameter.
+ */
+ retval = rt2x00mac_conf_tx(hw, queue_idx, params);
+ if (retval)
+ return retval;
-static void rt61pci_reset_tsf(struct ieee80211_hw *hw)
-{
- struct rt2x00_dev *rt2x00dev = hw->priv;
+ queue = rt2x00queue_get_queue(rt2x00dev, queue_idx);
- rt2x00pci_register_write(rt2x00dev, TXRX_CSR12, 0);
- rt2x00pci_register_write(rt2x00dev, TXRX_CSR13, 0);
-}
+ /* Update WMM TXOP register */
+ if (queue_idx < 2) {
+ field.bit_offset = queue_idx * 16;
+ field.bit_mask = 0xffff << field.bit_offset;
-static int rt61pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb,
- struct ieee80211_tx_control *control)
-{
- struct rt2x00_dev *rt2x00dev = hw->priv;
+ rt2x00pci_register_read(rt2x00dev, AC_TXOP_CSR0, ®);
+ rt2x00_set_field32(®, field, queue->txop);
+ rt2x00pci_register_write(rt2x00dev, AC_TXOP_CSR0, reg);
+ } else if (queue_idx < 4) {
+ field.bit_offset = (queue_idx - 2) * 16;
+ field.bit_mask = 0xffff << field.bit_offset;
- /*
- * Just in case the ieee80211 doesn't set this,
- * but we need this queue set for the descriptor
- * initialization.
- */
- control->queue = IEEE80211_TX_QUEUE_BEACON;
-
- /*
- * We need to append the descriptor in front of the
- * beacon frame.
- */
- if (skb_headroom(skb) < TXD_DESC_SIZE) {
- if (pskb_expand_head(skb, TXD_DESC_SIZE, 0, GFP_ATOMIC)) {
- dev_kfree_skb(skb);
- return -ENOMEM;
- }
+ rt2x00pci_register_read(rt2x00dev, AC_TXOP_CSR1, ®);
+ rt2x00_set_field32(®, field, queue->txop);
+ rt2x00pci_register_write(rt2x00dev, AC_TXOP_CSR1, reg);
}
- /*
- * First we create the beacon.
- */
- skb_push(skb, TXD_DESC_SIZE);
- memset(skb->data, 0, TXD_DESC_SIZE);
+ /* Update WMM registers */
+ field.bit_offset = queue_idx * 4;
+ field.bit_mask = 0xf << field.bit_offset;
- rt2x00lib_write_tx_desc(rt2x00dev, (struct data_desc *)skb->data,
- (struct ieee80211_hdr *)(skb->data +
- TXD_DESC_SIZE),
- skb->len - TXD_DESC_SIZE, control);
+ rt2x00pci_register_read(rt2x00dev, AIFSN_CSR, ®);
+ rt2x00_set_field32(®, field, queue->aifs);
+ rt2x00pci_register_write(rt2x00dev, AIFSN_CSR, reg);
- /*
- * Write entire beacon with descriptor to register,
- * and kick the beacon generator.
- */
- rt2x00pci_register_multiwrite(rt2x00dev, HW_BEACON_BASE0,
- skb->data, skb->len);
- rt61pci_kick_tx_queue(rt2x00dev, IEEE80211_TX_QUEUE_BEACON);
+ rt2x00pci_register_read(rt2x00dev, CWMIN_CSR, ®);
+ rt2x00_set_field32(®, field, queue->cw_min);
+ rt2x00pci_register_write(rt2x00dev, CWMIN_CSR, reg);
+
+ rt2x00pci_register_read(rt2x00dev, CWMAX_CSR, ®);
+ rt2x00_set_field32(®, field, queue->cw_max);
+ rt2x00pci_register_write(rt2x00dev, CWMAX_CSR, reg);
return 0;
}
+static u64 rt61pci_get_tsf(struct ieee80211_hw *hw)
+{
+ struct rt2x00_dev *rt2x00dev = hw->priv;
+ u64 tsf;
+ u32 reg;
+
+ rt2x00pci_register_read(rt2x00dev, TXRX_CSR13, ®);
+ tsf = (u64) rt2x00_get_field32(reg, TXRX_CSR13_HIGH_TSFTIMER) << 32;
+ rt2x00pci_register_read(rt2x00dev, TXRX_CSR12, ®);
+ tsf |= rt2x00_get_field32(reg, TXRX_CSR12_LOW_TSFTIMER);
+
+ return tsf;
+}
+
static const struct ieee80211_ops rt61pci_mac80211_ops = {
.tx = rt2x00mac_tx,
.start = rt2x00mac_start,
.remove_interface = rt2x00mac_remove_interface,
.config = rt2x00mac_config,
.config_interface = rt2x00mac_config_interface,
- .configure_filter = rt61pci_configure_filter,
+ .configure_filter = rt2x00mac_configure_filter,
+ .set_key = rt2x00mac_set_key,
.get_stats = rt2x00mac_get_stats,
.set_retry_limit = rt61pci_set_retry_limit,
- .erp_ie_changed = rt2x00mac_erp_ie_changed,
- .conf_tx = rt2x00mac_conf_tx,
+ .bss_info_changed = rt2x00mac_bss_info_changed,
+ .conf_tx = rt61pci_conf_tx,
.get_tx_stats = rt2x00mac_get_tx_stats,
.get_tsf = rt61pci_get_tsf,
- .reset_tsf = rt61pci_reset_tsf,
- .beacon_update = rt61pci_beacon_update,
};
static const struct rt2x00lib_ops rt61pci_rt2x00_ops = {
.irq_handler = rt61pci_interrupt,
.probe_hw = rt61pci_probe_hw,
.get_firmware_name = rt61pci_get_firmware_name,
+ .get_firmware_crc = rt61pci_get_firmware_crc,
.load_firmware = rt61pci_load_firmware,
.initialize = rt2x00pci_initialize,
.uninitialize = rt2x00pci_uninitialize,
+ .init_rxentry = rt61pci_init_rxentry,
+ .init_txentry = rt61pci_init_txentry,
.set_device_state = rt61pci_set_device_state,
.rfkill_poll = rt61pci_rfkill_poll,
.link_stats = rt61pci_link_stats,
.link_tuner = rt61pci_link_tuner,
.write_tx_desc = rt61pci_write_tx_desc,
.write_tx_data = rt2x00pci_write_tx_data,
+ .write_beacon = rt61pci_write_beacon,
.kick_tx_queue = rt61pci_kick_tx_queue,
.fill_rxdone = rt61pci_fill_rxdone,
- .config_mac_addr = rt61pci_config_mac_addr,
- .config_bssid = rt61pci_config_bssid,
- .config_type = rt61pci_config_type,
- .config_preamble = rt61pci_config_preamble,
+ .config_shared_key = rt61pci_config_shared_key,
+ .config_pairwise_key = rt61pci_config_pairwise_key,
+ .config_filter = rt61pci_config_filter,
+ .config_intf = rt61pci_config_intf,
+ .config_erp = rt61pci_config_erp,
.config = rt61pci_config,
};
+static const struct data_queue_desc rt61pci_queue_rx = {
+ .entry_num = RX_ENTRIES,
+ .data_size = DATA_FRAME_SIZE,
+ .desc_size = RXD_DESC_SIZE,
+ .priv_size = sizeof(struct queue_entry_priv_pci),
+};
+
+static const struct data_queue_desc rt61pci_queue_tx = {
+ .entry_num = TX_ENTRIES,
+ .data_size = DATA_FRAME_SIZE,
+ .desc_size = TXD_DESC_SIZE,
+ .priv_size = sizeof(struct queue_entry_priv_pci),
+};
+
+static const struct data_queue_desc rt61pci_queue_bcn = {
+ .entry_num = 4 * BEACON_ENTRIES,
+ .data_size = 0, /* No DMA required for beacons */
+ .desc_size = TXINFO_SIZE,
+ .priv_size = sizeof(struct queue_entry_priv_pci),
+};
+
static const struct rt2x00_ops rt61pci_ops = {
- .name = DRV_NAME,
- .rxd_size = RXD_DESC_SIZE,
- .txd_size = TXD_DESC_SIZE,
+ .name = KBUILD_MODNAME,
+ .max_sta_intf = 1,
+ .max_ap_intf = 4,
.eeprom_size = EEPROM_SIZE,
.rf_size = RF_SIZE,
+ .tx_queues = NUM_TX_QUEUES,
+ .rx = &rt61pci_queue_rx,
+ .tx = &rt61pci_queue_tx,
+ .bcn = &rt61pci_queue_bcn,
.lib = &rt61pci_rt2x00_ops,
.hw = &rt61pci_mac80211_ops,
#ifdef CONFIG_RT2X00_LIB_DEBUGFS
MODULE_LICENSE("GPL");
static struct pci_driver rt61pci_driver = {
- .name = DRV_NAME,
+ .name = KBUILD_MODNAME,
.id_table = rt61pci_device_table,
.probe = rt2x00pci_probe,
.remove = __devexit_p(rt2x00pci_remove),