/*
- Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+ Copyright (C) 2009 Ivo van Doorn <IvDoorn@gmail.com>
+ Copyright (C) 2009 Mattias Nissler <mattias.nissler@gmx.de>
+ Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
+ Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com>
+ Copyright (C) 2009 Axel Kollhofer <rain_maker@root-forum.org>
<http://rt2x00.serialmonkey.com>
This program is free software; you can redistribute it and/or modify
static int rt2800usb_check_firmware(struct rt2x00_dev *rt2x00dev,
const u8 *data, const size_t len)
{
- u16 chipset = (rt2x00_rev(&rt2x00dev->chip) >> 16) & 0xffff;
+ u16 chipset = (rt2x00_rev(rt2x00dev) >> 16) & 0xffff;
size_t offset = 0;
/*
u32 reg;
u32 offset;
u32 length;
- u16 chipset = (rt2x00_rev(&rt2x00dev->chip) >> 16) & 0xffff;
+ u16 chipset = (rt2x00_rev(rt2x00dev) >> 16) & 0xffff;
/*
* Check which section of the firmware we need.
}
/*
- * Initialization functions.
- */
-static int rt2800usb_init_registers(struct rt2x00_dev *rt2x00dev)
-{
- u32 reg;
- unsigned int i;
-
- if (rt2x00_intf_is_usb(rt2x00dev)) {
- /*
- * Wait untill BBP and RF are ready.
- */
- for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
- rt2800_register_read(rt2x00dev, MAC_CSR0, ®);
- if (reg && reg != ~0)
- break;
- msleep(1);
- }
-
- if (i == REGISTER_BUSY_COUNT) {
- ERROR(rt2x00dev, "Unstable hardware.\n");
- return -EBUSY;
- }
-
- rt2800_register_read(rt2x00dev, PBF_SYS_CTRL, ®);
- rt2800_register_write(rt2x00dev, PBF_SYS_CTRL,
- reg & ~0x00002000);
- }
-
- rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®);
- rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_CSR, 1);
- rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_BBP, 1);
- rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
-
- if (rt2x00_intf_is_usb(rt2x00dev)) {
- rt2800_register_write(rt2x00dev, USB_DMA_CFG, 0x00000000);
-
- rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0,
- USB_MODE_RESET, REGISTER_TIMEOUT);
- }
-
- rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000);
-
- rt2800_register_read(rt2x00dev, BCN_OFFSET0, ®);
- rt2x00_set_field32(®, BCN_OFFSET0_BCN0, 0xe0); /* 0x3800 */
- rt2x00_set_field32(®, BCN_OFFSET0_BCN1, 0xe8); /* 0x3a00 */
- rt2x00_set_field32(®, BCN_OFFSET0_BCN2, 0xf0); /* 0x3c00 */
- rt2x00_set_field32(®, BCN_OFFSET0_BCN3, 0xf8); /* 0x3e00 */
- rt2800_register_write(rt2x00dev, BCN_OFFSET0, reg);
-
- rt2800_register_read(rt2x00dev, BCN_OFFSET1, ®);
- rt2x00_set_field32(®, BCN_OFFSET1_BCN4, 0xc8); /* 0x3200 */
- rt2x00_set_field32(®, BCN_OFFSET1_BCN5, 0xd0); /* 0x3400 */
- rt2x00_set_field32(®, BCN_OFFSET1_BCN6, 0x77); /* 0x1dc0 */
- rt2x00_set_field32(®, BCN_OFFSET1_BCN7, 0x6f); /* 0x1bc0 */
- rt2800_register_write(rt2x00dev, BCN_OFFSET1, reg);
-
- rt2800_register_write(rt2x00dev, LEGACY_BASIC_RATE, 0x0000013f);
- rt2800_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003);
-
- rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000);
-
- rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®);
- rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_INTERVAL, 0);
- rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 0);
- rt2x00_set_field32(®, BCN_TIME_CFG_TSF_SYNC, 0);
- rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 0);
- rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 0);
- rt2x00_set_field32(®, BCN_TIME_CFG_TX_TIME_COMPENSATE, 0);
- rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
-
- if (rt2x00_intf_is_usb(rt2x00dev) &&
- rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) {
- rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400);
- rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000);
- rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
- } else {
- rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000000);
- rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
- }
-
- rt2800_register_read(rt2x00dev, TX_LINK_CFG, ®);
- rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFB_LIFETIME, 32);
- rt2x00_set_field32(®, TX_LINK_CFG_MFB_ENABLE, 0);
- rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_UMFS_ENABLE, 0);
- rt2x00_set_field32(®, TX_LINK_CFG_TX_MRQ_EN, 0);
- rt2x00_set_field32(®, TX_LINK_CFG_TX_RDG_EN, 0);
- rt2x00_set_field32(®, TX_LINK_CFG_TX_CF_ACK_EN, 1);
- rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFB, 0);
- rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFS, 0);
- rt2800_register_write(rt2x00dev, TX_LINK_CFG, reg);
-
- rt2800_register_read(rt2x00dev, TX_TIMEOUT_CFG, ®);
- rt2x00_set_field32(®, TX_TIMEOUT_CFG_MPDU_LIFETIME, 9);
- rt2x00_set_field32(®, TX_TIMEOUT_CFG_TX_OP_TIMEOUT, 10);
- rt2800_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg);
-
- rt2800_register_read(rt2x00dev, MAX_LEN_CFG, ®);
- rt2x00_set_field32(®, MAX_LEN_CFG_MAX_MPDU, AGGREGATION_SIZE);
- if (rt2x00_rev(&rt2x00dev->chip) >= RT2880E_VERSION &&
- rt2x00_rev(&rt2x00dev->chip) < RT3070_VERSION)
- rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 2);
- else
- rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 1);
- rt2x00_set_field32(®, MAX_LEN_CFG_MIN_PSDU, 0);
- rt2x00_set_field32(®, MAX_LEN_CFG_MIN_MPDU, 0);
- rt2800_register_write(rt2x00dev, MAX_LEN_CFG, reg);
-
- rt2800_register_write(rt2x00dev, PBF_MAX_PCNT, 0x1f3fbf9f);
-
- rt2800_register_read(rt2x00dev, AUTO_RSP_CFG, ®);
- rt2x00_set_field32(®, AUTO_RSP_CFG_AUTORESPONDER, 1);
- rt2x00_set_field32(®, AUTO_RSP_CFG_CTS_40_MMODE, 0);
- rt2x00_set_field32(®, AUTO_RSP_CFG_CTS_40_MREF, 0);
- rt2x00_set_field32(®, AUTO_RSP_CFG_DUAL_CTS_EN, 0);
- rt2x00_set_field32(®, AUTO_RSP_CFG_ACK_CTS_PSM_BIT, 0);
- rt2800_register_write(rt2x00dev, AUTO_RSP_CFG, reg);
-
- rt2800_register_read(rt2x00dev, CCK_PROT_CFG, ®);
- rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_RATE, 8);
- rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_CTRL, 0);
- rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_NAV, 1);
- rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_CCK, 1);
- rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
- rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_MM20, 1);
- rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_MM40, 1);
- rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_GF20, 1);
- rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_GF40, 1);
- rt2800_register_write(rt2x00dev, CCK_PROT_CFG, reg);
-
- rt2800_register_read(rt2x00dev, OFDM_PROT_CFG, ®);
- rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_RATE, 8);
- rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_CTRL, 0);
- rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_NAV, 1);
- rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_CCK, 1);
- rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
- rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_MM20, 1);
- rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_MM40, 1);
- rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_GF20, 1);
- rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_GF40, 1);
- rt2800_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
-
- rt2800_register_read(rt2x00dev, MM20_PROT_CFG, ®);
- rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_RATE, 0x4004);
- rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_CTRL, 0);
- rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_NAV, 1);
- rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_CCK, 1);
- rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
- rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_MM20, 1);
- rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_MM40, 0);
- rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_GF20, 1);
- rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_GF40, 0);
- rt2800_register_write(rt2x00dev, MM20_PROT_CFG, reg);
-
- rt2800_register_read(rt2x00dev, MM40_PROT_CFG, ®);
- rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_RATE, 0x4084);
- rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_CTRL, 0);
- rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_NAV, 1);
- rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_CCK, 1);
- rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
- rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_MM20, 1);
- rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_MM40, 1);
- rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_GF20, 1);
- rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_GF40, 1);
- rt2800_register_write(rt2x00dev, MM40_PROT_CFG, reg);
-
- rt2800_register_read(rt2x00dev, GF20_PROT_CFG, ®);
- rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_RATE, 0x4004);
- rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_CTRL, 0);
- rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_NAV, 1);
- rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_CCK, 1);
- rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
- rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_MM20, 1);
- rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_MM40, 0);
- rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_GF20, 1);
- rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_GF40, 0);
- rt2800_register_write(rt2x00dev, GF20_PROT_CFG, reg);
-
- rt2800_register_read(rt2x00dev, GF40_PROT_CFG, ®);
- rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_RATE, 0x4084);
- rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_CTRL, 0);
- rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_NAV, 1);
- rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_CCK, 1);
- rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
- rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_MM20, 1);
- rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_MM40, 1);
- rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_GF20, 1);
- rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_GF40, 1);
- rt2800_register_write(rt2x00dev, GF40_PROT_CFG, reg);
-
- if (rt2x00_intf_is_usb(rt2x00dev)) {
- rt2800_register_write(rt2x00dev, PBF_CFG, 0xf40006);
-
- rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®);
- rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
- rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_DMA_BUSY, 0);
- rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
- rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_DMA_BUSY, 0);
- rt2x00_set_field32(®, WPDMA_GLO_CFG_WP_DMA_BURST_SIZE, 3);
- rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 0);
- rt2x00_set_field32(®, WPDMA_GLO_CFG_BIG_ENDIAN, 0);
- rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_HDR_SCATTER, 0);
- rt2x00_set_field32(®, WPDMA_GLO_CFG_HDR_SEG_LEN, 0);
- rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
- }
-
- rt2800_register_write(rt2x00dev, TXOP_CTRL_CFG, 0x0000583f);
- rt2800_register_write(rt2x00dev, TXOP_HLDR_ET, 0x00000002);
-
- rt2800_register_read(rt2x00dev, TX_RTS_CFG, ®);
- rt2x00_set_field32(®, TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT, 32);
- rt2x00_set_field32(®, TX_RTS_CFG_RTS_THRES,
- IEEE80211_MAX_RTS_THRESHOLD);
- rt2x00_set_field32(®, TX_RTS_CFG_RTS_FBK_EN, 0);
- rt2800_register_write(rt2x00dev, TX_RTS_CFG, reg);
-
- rt2800_register_write(rt2x00dev, EXP_ACK_TIME, 0x002400ca);
- rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003);
-
- /*
- * ASIC will keep garbage value after boot, clear encryption keys.
- */
- for (i = 0; i < 4; i++)
- rt2800_register_write(rt2x00dev,
- SHARED_KEY_MODE_ENTRY(i), 0);
-
- for (i = 0; i < 256; i++) {
- u32 wcid[2] = { 0xffffffff, 0x00ffffff };
- rt2800_register_multiwrite(rt2x00dev, MAC_WCID_ENTRY(i),
- wcid, sizeof(wcid));
-
- rt2800_register_write(rt2x00dev, MAC_WCID_ATTR_ENTRY(i), 1);
- rt2800_register_write(rt2x00dev, MAC_IVEIV_ENTRY(i), 0);
- }
-
- /*
- * Clear all beacons
- * For the Beacon base registers we only need to clear
- * the first byte since that byte contains the VALID and OWNER
- * bits which (when set to 0) will invalidate the entire beacon.
- */
- rt2800_register_write(rt2x00dev, HW_BEACON_BASE0, 0);
- rt2800_register_write(rt2x00dev, HW_BEACON_BASE1, 0);
- rt2800_register_write(rt2x00dev, HW_BEACON_BASE2, 0);
- rt2800_register_write(rt2x00dev, HW_BEACON_BASE3, 0);
- rt2800_register_write(rt2x00dev, HW_BEACON_BASE4, 0);
- rt2800_register_write(rt2x00dev, HW_BEACON_BASE5, 0);
- rt2800_register_write(rt2x00dev, HW_BEACON_BASE6, 0);
- rt2800_register_write(rt2x00dev, HW_BEACON_BASE7, 0);
-
- if (rt2x00_intf_is_usb(rt2x00dev)) {
- rt2800_register_read(rt2x00dev, USB_CYC_CFG, ®);
- rt2x00_set_field32(®, USB_CYC_CFG_CLOCK_CYCLE, 30);
- rt2800_register_write(rt2x00dev, USB_CYC_CFG, reg);
- }
-
- rt2800_register_read(rt2x00dev, HT_FBK_CFG0, ®);
- rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS0FBK, 0);
- rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS1FBK, 0);
- rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS2FBK, 1);
- rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS3FBK, 2);
- rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS4FBK, 3);
- rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS5FBK, 4);
- rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS6FBK, 5);
- rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS7FBK, 6);
- rt2800_register_write(rt2x00dev, HT_FBK_CFG0, reg);
-
- rt2800_register_read(rt2x00dev, HT_FBK_CFG1, ®);
- rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS8FBK, 8);
- rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS9FBK, 8);
- rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS10FBK, 9);
- rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS11FBK, 10);
- rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS12FBK, 11);
- rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS13FBK, 12);
- rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS14FBK, 13);
- rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS15FBK, 14);
- rt2800_register_write(rt2x00dev, HT_FBK_CFG1, reg);
-
- rt2800_register_read(rt2x00dev, LG_FBK_CFG0, ®);
- rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS0FBK, 8);
- rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS1FBK, 8);
- rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS2FBK, 9);
- rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS3FBK, 10);
- rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS4FBK, 11);
- rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS5FBK, 12);
- rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS6FBK, 13);
- rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS7FBK, 14);
- rt2800_register_write(rt2x00dev, LG_FBK_CFG0, reg);
-
- rt2800_register_read(rt2x00dev, LG_FBK_CFG1, ®);
- rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS0FBK, 0);
- rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS1FBK, 0);
- rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS2FBK, 1);
- rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS3FBK, 2);
- rt2800_register_write(rt2x00dev, LG_FBK_CFG1, reg);
-
- /*
- * We must clear the error counters.
- * These registers are cleared on read,
- * so we may pass a useless variable to store the value.
- */
- rt2800_register_read(rt2x00dev, RX_STA_CNT0, ®);
- rt2800_register_read(rt2x00dev, RX_STA_CNT1, ®);
- rt2800_register_read(rt2x00dev, RX_STA_CNT2, ®);
- rt2800_register_read(rt2x00dev, TX_STA_CNT0, ®);
- rt2800_register_read(rt2x00dev, TX_STA_CNT1, ®);
- rt2800_register_read(rt2x00dev, TX_STA_CNT2, ®);
-
- return 0;
-}
-
-static int rt2800usb_wait_bbp_rf_ready(struct rt2x00_dev *rt2x00dev)
-{
- unsigned int i;
- u32 reg;
-
- for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
- rt2800_register_read(rt2x00dev, MAC_STATUS_CFG, ®);
- if (!rt2x00_get_field32(reg, MAC_STATUS_CFG_BBP_RF_BUSY))
- return 0;
-
- udelay(REGISTER_BUSY_DELAY);
- }
-
- ERROR(rt2x00dev, "BBP/RF register access failed, aborting.\n");
- return -EACCES;
-}
-
-static int rt2800usb_wait_bbp_ready(struct rt2x00_dev *rt2x00dev)
-{
- unsigned int i;
- u8 value;
-
- /*
- * BBP was enabled after firmware was loaded,
- * but we need to reactivate it now.
- */
- rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
- rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
- msleep(1);
-
- for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
- rt2800_bbp_read(rt2x00dev, 0, &value);
- if ((value != 0xff) && (value != 0x00))
- return 0;
- udelay(REGISTER_BUSY_DELAY);
- }
-
- ERROR(rt2x00dev, "BBP register access failed, aborting.\n");
- return -EACCES;
-}
-
-static int rt2800usb_init_bbp(struct rt2x00_dev *rt2x00dev)
-{
- unsigned int i;
- u16 eeprom;
- u8 reg_id;
- u8 value;
-
- if (unlikely(rt2800usb_wait_bbp_rf_ready(rt2x00dev) ||
- rt2800usb_wait_bbp_ready(rt2x00dev)))
- return -EACCES;
-
- rt2800_bbp_write(rt2x00dev, 65, 0x2c);
- rt2800_bbp_write(rt2x00dev, 66, 0x38);
- rt2800_bbp_write(rt2x00dev, 69, 0x12);
- rt2800_bbp_write(rt2x00dev, 70, 0x0a);
- rt2800_bbp_write(rt2x00dev, 73, 0x10);
- rt2800_bbp_write(rt2x00dev, 81, 0x37);
- rt2800_bbp_write(rt2x00dev, 82, 0x62);
- rt2800_bbp_write(rt2x00dev, 83, 0x6a);
- rt2800_bbp_write(rt2x00dev, 84, 0x99);
- rt2800_bbp_write(rt2x00dev, 86, 0x00);
- rt2800_bbp_write(rt2x00dev, 91, 0x04);
- rt2800_bbp_write(rt2x00dev, 92, 0x00);
- rt2800_bbp_write(rt2x00dev, 103, 0x00);
- rt2800_bbp_write(rt2x00dev, 105, 0x05);
-
- if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) {
- rt2800_bbp_write(rt2x00dev, 69, 0x16);
- rt2800_bbp_write(rt2x00dev, 73, 0x12);
- }
-
- if (rt2x00_rev(&rt2x00dev->chip) > RT2860D_VERSION)
- rt2800_bbp_write(rt2x00dev, 84, 0x19);
-
- if (rt2x00_intf_is_usb(rt2x00dev) &&
- rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) {
- rt2800_bbp_write(rt2x00dev, 70, 0x0a);
- rt2800_bbp_write(rt2x00dev, 84, 0x99);
- rt2800_bbp_write(rt2x00dev, 105, 0x05);
- }
-
- for (i = 0; i < EEPROM_BBP_SIZE; i++) {
- rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
-
- if (eeprom != 0xffff && eeprom != 0x0000) {
- reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
- value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
- rt2800_bbp_write(rt2x00dev, reg_id, value);
- }
- }
-
- return 0;
-}
-
-static u8 rt2800usb_init_rx_filter(struct rt2x00_dev *rt2x00dev,
- bool bw40, u8 rfcsr24, u8 filter_target)
-{
- unsigned int i;
- u8 bbp;
- u8 rfcsr;
- u8 passband;
- u8 stopband;
- u8 overtuned = 0;
-
- rt2800_rfcsr_write(rt2x00dev, 24, rfcsr24);
-
- rt2800_bbp_read(rt2x00dev, 4, &bbp);
- rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * bw40);
- rt2800_bbp_write(rt2x00dev, 4, bbp);
-
- rt2800_rfcsr_read(rt2x00dev, 22, &rfcsr);
- rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 1);
- rt2800_rfcsr_write(rt2x00dev, 22, rfcsr);
-
- /*
- * Set power & frequency of passband test tone
- */
- rt2800_bbp_write(rt2x00dev, 24, 0);
-
- for (i = 0; i < 100; i++) {
- rt2800_bbp_write(rt2x00dev, 25, 0x90);
- msleep(1);
-
- rt2800_bbp_read(rt2x00dev, 55, &passband);
- if (passband)
- break;
- }
-
- /*
- * Set power & frequency of stopband test tone
- */
- rt2800_bbp_write(rt2x00dev, 24, 0x06);
-
- for (i = 0; i < 100; i++) {
- rt2800_bbp_write(rt2x00dev, 25, 0x90);
- msleep(1);
-
- rt2800_bbp_read(rt2x00dev, 55, &stopband);
-
- if ((passband - stopband) <= filter_target) {
- rfcsr24++;
- overtuned += ((passband - stopband) == filter_target);
- } else
- break;
-
- rt2800_rfcsr_write(rt2x00dev, 24, rfcsr24);
- }
-
- rfcsr24 -= !!overtuned;
-
- rt2800_rfcsr_write(rt2x00dev, 24, rfcsr24);
- return rfcsr24;
-}
-
-static int rt2800usb_init_rfcsr(struct rt2x00_dev *rt2x00dev)
-{
- u8 rfcsr;
- u8 bbp;
-
- if (rt2x00_intf_is_usb(rt2x00dev) &&
- rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION)
- return 0;
-
- /*
- * Init RF calibration.
- */
- rt2800_rfcsr_read(rt2x00dev, 30, &rfcsr);
- rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1);
- rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
- msleep(1);
- rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0);
- rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
-
- if (rt2x00_intf_is_usb(rt2x00dev)) {
- rt2800_rfcsr_write(rt2x00dev, 4, 0x40);
- rt2800_rfcsr_write(rt2x00dev, 5, 0x03);
- rt2800_rfcsr_write(rt2x00dev, 6, 0x02);
- rt2800_rfcsr_write(rt2x00dev, 7, 0x70);
- rt2800_rfcsr_write(rt2x00dev, 9, 0x0f);
- rt2800_rfcsr_write(rt2x00dev, 10, 0x71);
- rt2800_rfcsr_write(rt2x00dev, 11, 0x21);
- rt2800_rfcsr_write(rt2x00dev, 12, 0x7b);
- rt2800_rfcsr_write(rt2x00dev, 14, 0x90);
- rt2800_rfcsr_write(rt2x00dev, 15, 0x58);
- rt2800_rfcsr_write(rt2x00dev, 16, 0xb3);
- rt2800_rfcsr_write(rt2x00dev, 17, 0x92);
- rt2800_rfcsr_write(rt2x00dev, 18, 0x2c);
- rt2800_rfcsr_write(rt2x00dev, 19, 0x02);
- rt2800_rfcsr_write(rt2x00dev, 20, 0xba);
- rt2800_rfcsr_write(rt2x00dev, 21, 0xdb);
- rt2800_rfcsr_write(rt2x00dev, 24, 0x16);
- rt2800_rfcsr_write(rt2x00dev, 25, 0x01);
- rt2800_rfcsr_write(rt2x00dev, 27, 0x03);
- rt2800_rfcsr_write(rt2x00dev, 29, 0x1f);
- }
-
- /*
- * Set RX Filter calibration for 20MHz and 40MHz
- */
- rt2x00dev->calibration[0] =
- rt2800usb_init_rx_filter(rt2x00dev, false, 0x07, 0x16);
- rt2x00dev->calibration[1] =
- rt2800usb_init_rx_filter(rt2x00dev, true, 0x27, 0x19);
-
- /*
- * Set back to initial state
- */
- rt2800_bbp_write(rt2x00dev, 24, 0);
-
- rt2800_rfcsr_read(rt2x00dev, 22, &rfcsr);
- rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 0);
- rt2800_rfcsr_write(rt2x00dev, 22, rfcsr);
-
- /*
- * set BBP back to BW20
- */
- rt2800_bbp_read(rt2x00dev, 4, &bbp);
- rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0);
- rt2800_bbp_write(rt2x00dev, 4, bbp);
-
- return 0;
-}
-
-/*
* Device state switch handlers.
*/
static void rt2800usb_toggle_rx(struct rt2x00_dev *rt2x00dev,
* Initialize all registers.
*/
if (unlikely(rt2800usb_wait_wpdma_ready(rt2x00dev) ||
- rt2800usb_init_registers(rt2x00dev) ||
- rt2800usb_init_bbp(rt2x00dev) ||
- rt2800usb_init_rfcsr(rt2x00dev)))
+ rt2800_init_registers(rt2x00dev) ||
+ rt2800_init_bbp(rt2x00dev) ||
+ rt2800_init_rfcsr(rt2x00dev)))
return -EIO;
rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®);
rt2800_register_read(rt2x00dev, USB_DMA_CFG, ®);
rt2x00_set_field32(®, USB_DMA_CFG_PHY_CLEAR, 0);
- /* Don't use bulk in aggregation when working with USB 1.1 */
- rt2x00_set_field32(®, USB_DMA_CFG_RX_BULK_AGG_EN,
- (rt2x00dev->rx->usb_maxpacket == 512));
+ rt2x00_set_field32(®, USB_DMA_CFG_RX_BULK_AGG_EN, 0);
rt2x00_set_field32(®, USB_DMA_CFG_RX_BULK_AGG_TIMEOUT, 128);
/*
* Total room for RX frames in kilobytes, PBF might still exceed
{
struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
- __le32 *rxd = (__le32 *)entry->skb->data;
+ __le32 *rxi = (__le32 *)entry->skb->data;
__le32 *rxwi;
- u32 rxd0;
+ __le32 *rxd;
+ u32 rxi0;
u32 rxwi0;
u32 rxwi1;
u32 rxwi2;
u32 rxwi3;
+ u32 rxd0;
+ int rx_pkt_len;
+
+ /*
+ * RX frame format is :
+ * | RXINFO | RXWI | header | L2 pad | payload | pad | RXD | USB pad |
+ * |<------------ rx_pkt_len -------------->|
+ */
+ rt2x00_desc_read(rxi, 0, &rxi0);
+ rx_pkt_len = rt2x00_get_field32(rxi0, RXINFO_W0_USB_DMA_RX_PKT_LEN);
+
+ rxwi = (__le32 *)(entry->skb->data + RXINFO_DESC_SIZE);
+
+ /*
+ * FIXME : we need to check for rx_pkt_len validity
+ */
+ rxd = (__le32 *)(entry->skb->data + RXINFO_DESC_SIZE + rx_pkt_len);
/*
* Copy descriptor to the skbdesc->desc buffer, making it safe from
* moving of frame data in rt2x00usb.
*/
- memcpy(skbdesc->desc, rxd, skbdesc->desc_len);
- rxd = (__le32 *)skbdesc->desc;
- rxwi = &rxd[RXINFO_DESC_SIZE / sizeof(__le32)];
+ memcpy(skbdesc->desc, rxi, skbdesc->desc_len);
/*
* It is now safe to read the descriptor on all architectures.
*/
- rt2x00_desc_read(rxd, 0, &rxd0);
rt2x00_desc_read(rxwi, 0, &rxwi0);
rt2x00_desc_read(rxwi, 1, &rxwi1);
rt2x00_desc_read(rxwi, 2, &rxwi2);
rt2x00_desc_read(rxwi, 3, &rxwi3);
+ rt2x00_desc_read(rxd, 0, &rxd0);
if (rt2x00_get_field32(rxd0, RXD_W0_CRC_ERROR))
rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
if (rt2x00_get_field32(rxd0, RXD_W0_MY_BSS))
rxdesc->dev_flags |= RXDONE_MY_BSS;
- if (rt2x00_get_field32(rxd0, RXD_W0_L2PAD)) {
+ if (rt2x00_get_field32(rxd0, RXD_W0_L2PAD))
rxdesc->dev_flags |= RXDONE_L2PAD;
- skbdesc->flags |= SKBDESC_L2_PADDED;
- }
if (rt2x00_get_field32(rxwi1, RXWI_W1_SHORT_GI))
rxdesc->flags |= RX_FLAG_SHORT_GI;
* Remove RXWI descriptor from start of buffer.
*/
skb_pull(entry->skb, skbdesc->desc_len);
- skb_trim(entry->skb, rxdesc->size);
}
/*
*/
static int rt2800usb_validate_eeprom(struct rt2x00_dev *rt2x00dev)
{
- u16 word;
- u8 *mac;
- u8 default_lna_gain;
-
- rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom, EEPROM_SIZE);
-
- /*
- * Start validation of the data that has been read.
- */
- mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
- if (!is_valid_ether_addr(mac)) {
- random_ether_addr(mac);
- EEPROM(rt2x00dev, "MAC: %pM\n", mac);
- }
-
- rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word);
- if (word == 0xffff) {
- rt2x00_set_field16(&word, EEPROM_ANTENNA_RXPATH, 2);
- rt2x00_set_field16(&word, EEPROM_ANTENNA_TXPATH, 1);
- rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF2820);
- rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
- EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word);
- } else if (rt2x00_rev(&rt2x00dev->chip) < RT2883_VERSION) {
- /*
- * There is a max of 2 RX streams for RT2870 series
- */
- if (rt2x00_get_field16(word, EEPROM_ANTENNA_RXPATH) > 2)
- rt2x00_set_field16(&word, EEPROM_ANTENNA_RXPATH, 2);
- rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
- }
-
- rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word);
- if (word == 0xffff) {
- rt2x00_set_field16(&word, EEPROM_NIC_HW_RADIO, 0);
- rt2x00_set_field16(&word, EEPROM_NIC_DYNAMIC_TX_AGC, 0);
- rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_BG, 0);
- rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_A, 0);
- rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0);
- rt2x00_set_field16(&word, EEPROM_NIC_BW40M_SB_BG, 0);
- rt2x00_set_field16(&word, EEPROM_NIC_BW40M_SB_A, 0);
- rt2x00_set_field16(&word, EEPROM_NIC_WPS_PBC, 0);
- rt2x00_set_field16(&word, EEPROM_NIC_BW40M_BG, 0);
- rt2x00_set_field16(&word, EEPROM_NIC_BW40M_A, 0);
- rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word);
- EEPROM(rt2x00dev, "NIC: 0x%04x\n", word);
- }
-
- rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &word);
- if ((word & 0x00ff) == 0x00ff) {
- rt2x00_set_field16(&word, EEPROM_FREQ_OFFSET, 0);
- rt2x00_set_field16(&word, EEPROM_FREQ_LED_MODE,
- LED_MODE_TXRX_ACTIVITY);
- rt2x00_set_field16(&word, EEPROM_FREQ_LED_POLARITY, 0);
- rt2x00_eeprom_write(rt2x00dev, EEPROM_FREQ, word);
- rt2x00_eeprom_write(rt2x00dev, EEPROM_LED1, 0x5555);
- rt2x00_eeprom_write(rt2x00dev, EEPROM_LED2, 0x2221);
- rt2x00_eeprom_write(rt2x00dev, EEPROM_LED3, 0xa9f8);
- EEPROM(rt2x00dev, "Freq: 0x%04x\n", word);
- }
-
- /*
- * During the LNA validation we are going to use
- * lna0 as correct value. Note that EEPROM_LNA
- * is never validated.
- */
- rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &word);
- default_lna_gain = rt2x00_get_field16(word, EEPROM_LNA_A0);
-
- rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG, &word);
- if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG_OFFSET0)) > 10)
- rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET0, 0);
- if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG_OFFSET1)) > 10)
- rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET1, 0);
- rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_BG, word);
-
- rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &word);
- if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG2_OFFSET2)) > 10)
- rt2x00_set_field16(&word, EEPROM_RSSI_BG2_OFFSET2, 0);
- if (rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0x00 ||
- rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0xff)
- rt2x00_set_field16(&word, EEPROM_RSSI_BG2_LNA_A1,
- default_lna_gain);
- rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_BG2, word);
-
- rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A, &word);
- if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET0)) > 10)
- rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET0, 0);
- if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET1)) > 10)
- rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET1, 0);
- rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_A, word);
-
- rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &word);
- if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A2_OFFSET2)) > 10)
- rt2x00_set_field16(&word, EEPROM_RSSI_A2_OFFSET2, 0);
- if (rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0x00 ||
- rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0xff)
- rt2x00_set_field16(&word, EEPROM_RSSI_A2_LNA_A2,
- default_lna_gain);
- rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_A2, word);
-
- return 0;
-}
-
-static int rt2800usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
-{
- u32 reg;
- u16 value;
- u16 eeprom;
-
- /*
- * Read EEPROM word for configuration.
- */
- rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
-
- /*
- * Identify RF chipset.
- */
- value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
- rt2800_register_read(rt2x00dev, MAC_CSR0, ®);
- rt2x00_set_chip(rt2x00dev, RT2870, value, reg);
-
- /*
- * The check for rt2860 is not a typo, some rt2870 hardware
- * identifies itself as rt2860 in the CSR register.
- */
- if (!rt2x00_check_rev(&rt2x00dev->chip, 0xfff00000, 0x28600000) &&
- !rt2x00_check_rev(&rt2x00dev->chip, 0xfff00000, 0x28700000) &&
- !rt2x00_check_rev(&rt2x00dev->chip, 0xfff00000, 0x28800000) &&
- !rt2x00_check_rev(&rt2x00dev->chip, 0xffff0000, 0x30700000)) {
- ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
- return -ENODEV;
- }
-
- if (!rt2x00_rf(&rt2x00dev->chip, RF2820) &&
- !rt2x00_rf(&rt2x00dev->chip, RF2850) &&
- !rt2x00_rf(&rt2x00dev->chip, RF2720) &&
- !rt2x00_rf(&rt2x00dev->chip, RF2750) &&
- !rt2x00_rf(&rt2x00dev->chip, RF3020) &&
- !rt2x00_rf(&rt2x00dev->chip, RF2020)) {
- ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
- return -ENODEV;
- }
-
- /*
- * Identify default antenna configuration.
- */
- rt2x00dev->default_ant.tx =
- rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH);
- rt2x00dev->default_ant.rx =
- rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH);
-
- /*
- * Read frequency offset and RF programming sequence.
- */
- rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom);
- rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET);
-
- /*
- * Read external LNA informations.
- */
- rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
-
- if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_A))
- __set_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags);
- if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_BG))
- __set_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags);
-
- /*
- * Detect if this device has an hardware controlled radio.
- */
- if (rt2x00_get_field16(eeprom, EEPROM_NIC_HW_RADIO))
- __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
-
- /*
- * Store led settings, for correct led behaviour.
- */
-#ifdef CONFIG_RT2X00_LIB_LEDS
- rt2800_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
- rt2800_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC);
- rt2800_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY);
-
- rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ,
- &rt2x00dev->led_mcu_reg);
-#endif /* CONFIG_RT2X00_LIB_LEDS */
-
- return 0;
-}
-
-/*
- * RF value list for rt2870
- * Supports: 2.4 GHz (all) & 5.2 GHz (RF2850 & RF2750)
- */
-static const struct rf_channel rf_vals[] = {
- { 1, 0x18402ecc, 0x184c0786, 0x1816b455, 0x1800510b },
- { 2, 0x18402ecc, 0x184c0786, 0x18168a55, 0x1800519f },
- { 3, 0x18402ecc, 0x184c078a, 0x18168a55, 0x1800518b },
- { 4, 0x18402ecc, 0x184c078a, 0x18168a55, 0x1800519f },
- { 5, 0x18402ecc, 0x184c078e, 0x18168a55, 0x1800518b },
- { 6, 0x18402ecc, 0x184c078e, 0x18168a55, 0x1800519f },
- { 7, 0x18402ecc, 0x184c0792, 0x18168a55, 0x1800518b },
- { 8, 0x18402ecc, 0x184c0792, 0x18168a55, 0x1800519f },
- { 9, 0x18402ecc, 0x184c0796, 0x18168a55, 0x1800518b },
- { 10, 0x18402ecc, 0x184c0796, 0x18168a55, 0x1800519f },
- { 11, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800518b },
- { 12, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800519f },
- { 13, 0x18402ecc, 0x184c079e, 0x18168a55, 0x1800518b },
- { 14, 0x18402ecc, 0x184c07a2, 0x18168a55, 0x18005193 },
-
- /* 802.11 UNI / HyperLan 2 */
- { 36, 0x18402ecc, 0x184c099a, 0x18158a55, 0x180ed1a3 },
- { 38, 0x18402ecc, 0x184c099e, 0x18158a55, 0x180ed193 },
- { 40, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed183 },
- { 44, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed1a3 },
- { 46, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed18b },
- { 48, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed19b },
- { 52, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed193 },
- { 54, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed1a3 },
- { 56, 0x18402ec8, 0x184c068e, 0x18158a55, 0x180ed18b },
- { 60, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed183 },
- { 62, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed193 },
- { 64, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed1a3 },
-
- /* 802.11 HyperLan 2 */
- { 100, 0x18402ec8, 0x184c06b2, 0x18178a55, 0x180ed783 },
- { 102, 0x18402ec8, 0x184c06b2, 0x18578a55, 0x180ed793 },
- { 104, 0x18402ec8, 0x185c06b2, 0x18578a55, 0x180ed1a3 },
- { 108, 0x18402ecc, 0x185c0a32, 0x18578a55, 0x180ed193 },
- { 110, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed183 },
- { 112, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed19b },
- { 116, 0x18402ecc, 0x184c0a3a, 0x18178a55, 0x180ed1a3 },
- { 118, 0x18402ecc, 0x184c0a3e, 0x18178a55, 0x180ed193 },
- { 120, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed183 },
- { 124, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed193 },
- { 126, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed15b },
- { 128, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed1a3 },
- { 132, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed18b },
- { 134, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed193 },
- { 136, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed19b },
- { 140, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed183 },
-
- /* 802.11 UNII */
- { 149, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed1a7 },
- { 151, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed187 },
- { 153, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed18f },
- { 157, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed19f },
- { 159, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed1a7 },
- { 161, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed187 },
- { 165, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed197 },
- { 167, 0x18402ec4, 0x184c03d2, 0x18179855, 0x1815531f },
- { 169, 0x18402ec4, 0x184c03d2, 0x18179855, 0x18155327 },
- { 171, 0x18402ec4, 0x184c03d6, 0x18179855, 0x18155307 },
- { 173, 0x18402ec4, 0x184c03d6, 0x18179855, 0x1815530f },
-
- /* 802.11 Japan */
- { 184, 0x15002ccc, 0x1500491e, 0x1509be55, 0x150c0a0b },
- { 188, 0x15002ccc, 0x15004922, 0x1509be55, 0x150c0a13 },
- { 192, 0x15002ccc, 0x15004926, 0x1509be55, 0x150c0a1b },
- { 196, 0x15002ccc, 0x1500492a, 0x1509be55, 0x150c0a23 },
- { 208, 0x15002ccc, 0x1500493a, 0x1509be55, 0x150c0a13 },
- { 212, 0x15002ccc, 0x1500493e, 0x1509be55, 0x150c0a1b },
- { 216, 0x15002ccc, 0x15004982, 0x1509be55, 0x150c0a23 },
-};
-
-/*
- * RF value list for rt3070
- * Supports: 2.4 GHz
- */
-static const struct rf_channel rf_vals_3070[] = {
- {1, 241, 2, 2 },
- {2, 241, 2, 7 },
- {3, 242, 2, 2 },
- {4, 242, 2, 7 },
- {5, 243, 2, 2 },
- {6, 243, 2, 7 },
- {7, 244, 2, 2 },
- {8, 244, 2, 7 },
- {9, 245, 2, 2 },
- {10, 245, 2, 7 },
- {11, 246, 2, 2 },
- {12, 246, 2, 7 },
- {13, 247, 2, 2 },
- {14, 248, 2, 4 },
-};
-
-static int rt2800usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
-{
- struct hw_mode_spec *spec = &rt2x00dev->spec;
- struct channel_info *info;
- char *tx_power1;
- char *tx_power2;
- unsigned int i;
- u16 eeprom;
-
- /*
- * Initialize all hw fields.
- */
- rt2x00dev->hw->flags =
- IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
- IEEE80211_HW_SIGNAL_DBM |
- IEEE80211_HW_SUPPORTS_PS |
- IEEE80211_HW_PS_NULLFUNC_STACK;
- rt2x00dev->hw->extra_tx_headroom = TXINFO_DESC_SIZE + TXWI_DESC_SIZE;
-
- SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
- SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
- rt2x00_eeprom_addr(rt2x00dev,
- EEPROM_MAC_ADDR_0));
-
- rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
-
- /*
- * Initialize HT information.
- */
- spec->ht.ht_supported = true;
- spec->ht.cap =
- IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
- IEEE80211_HT_CAP_GRN_FLD |
- IEEE80211_HT_CAP_SGI_20 |
- IEEE80211_HT_CAP_SGI_40 |
- IEEE80211_HT_CAP_TX_STBC |
- IEEE80211_HT_CAP_RX_STBC |
- IEEE80211_HT_CAP_PSMP_SUPPORT;
- spec->ht.ampdu_factor = 3;
- spec->ht.ampdu_density = 4;
- spec->ht.mcs.tx_params =
- IEEE80211_HT_MCS_TX_DEFINED |
- IEEE80211_HT_MCS_TX_RX_DIFF |
- ((rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) - 1) <<
- IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT);
-
- switch (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH)) {
- case 3:
- spec->ht.mcs.rx_mask[2] = 0xff;
- case 2:
- spec->ht.mcs.rx_mask[1] = 0xff;
- case 1:
- spec->ht.mcs.rx_mask[0] = 0xff;
- spec->ht.mcs.rx_mask[4] = 0x1; /* MCS32 */
- break;
- }
-
- /*
- * Initialize hw_mode information.
- */
- spec->supported_bands = SUPPORT_BAND_2GHZ;
- spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
-
- if (rt2x00_rf(&rt2x00dev->chip, RF2820) ||
- rt2x00_rf(&rt2x00dev->chip, RF2720)) {
- spec->num_channels = 14;
- spec->channels = rf_vals;
- } else if (rt2x00_rf(&rt2x00dev->chip, RF2850) ||
- rt2x00_rf(&rt2x00dev->chip, RF2750)) {
- spec->supported_bands |= SUPPORT_BAND_5GHZ;
- spec->num_channels = ARRAY_SIZE(rf_vals);
- spec->channels = rf_vals;
- } else if (rt2x00_rf(&rt2x00dev->chip, RF3020) ||
- rt2x00_rf(&rt2x00dev->chip, RF2020)) {
- spec->num_channels = ARRAY_SIZE(rf_vals_3070);
- spec->channels = rf_vals_3070;
- }
-
- /*
- * Create channel information array
- */
- info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL);
- if (!info)
- return -ENOMEM;
-
- spec->channels_info = info;
-
- tx_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG1);
- tx_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG2);
-
- for (i = 0; i < 14; i++) {
- info[i].tx_power1 = TXPOWER_G_FROM_DEV(tx_power1[i]);
- info[i].tx_power2 = TXPOWER_G_FROM_DEV(tx_power2[i]);
- }
-
- if (spec->num_channels > 14) {
- tx_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A1);
- tx_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A2);
-
- for (i = 14; i < spec->num_channels; i++) {
- info[i].tx_power1 = TXPOWER_A_FROM_DEV(tx_power1[i]);
- info[i].tx_power2 = TXPOWER_A_FROM_DEV(tx_power2[i]);
- }
- }
+ if (rt2800_efuse_detect(rt2x00dev))
+ rt2800_read_eeprom_efuse(rt2x00dev);
+ else
+ rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom,
+ EEPROM_SIZE);
- return 0;
+ return rt2800_validate_eeprom(rt2x00dev);
}
static const struct rt2800_ops rt2800usb_rt2800_ops = {
.register_read = rt2x00usb_register_read,
+ .register_read_lock = rt2x00usb_register_read_lock,
.register_write = rt2x00usb_register_write,
.register_write_lock = rt2x00usb_register_write_lock,
{
int retval;
- rt2x00_set_chip_intf(rt2x00dev, RT2X00_CHIP_INTF_USB);
-
rt2x00dev->priv = (void *)&rt2800usb_rt2800_ops;
/*
if (retval)
return retval;
- retval = rt2800usb_init_eeprom(rt2x00dev);
+ retval = rt2800_init_eeprom(rt2x00dev);
if (retval)
return retval;
/*
* Initialize hw specifications.
*/
- retval = rt2800usb_probe_hw_mode(rt2x00dev);
+ retval = rt2800_probe_hw_mode(rt2x00dev);
if (retval)
return retval;
return 0;
}
-/*
- * IEEE80211 stack callback functions.
- */
-static void rt2800usb_get_tkip_seq(struct ieee80211_hw *hw, u8 hw_key_idx,
- u32 *iv32, u16 *iv16)
-{
- struct rt2x00_dev *rt2x00dev = hw->priv;
- struct mac_iveiv_entry iveiv_entry;
- u32 offset;
-
- offset = MAC_IVEIV_ENTRY(hw_key_idx);
- rt2800_register_multiread(rt2x00dev, offset,
- &iveiv_entry, sizeof(iveiv_entry));
-
- memcpy(&iveiv_entry.iv[0], iv16, sizeof(iv16));
- memcpy(&iveiv_entry.iv[4], iv32, sizeof(iv32));
-}
-
-static int rt2800usb_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
-{
- struct rt2x00_dev *rt2x00dev = hw->priv;
- u32 reg;
- bool enabled = (value < IEEE80211_MAX_RTS_THRESHOLD);
-
- rt2800_register_read(rt2x00dev, TX_RTS_CFG, ®);
- rt2x00_set_field32(®, TX_RTS_CFG_RTS_THRES, value);
- rt2800_register_write(rt2x00dev, TX_RTS_CFG, reg);
-
- rt2800_register_read(rt2x00dev, CCK_PROT_CFG, ®);
- rt2x00_set_field32(®, CCK_PROT_CFG_RTS_TH_EN, enabled);
- rt2800_register_write(rt2x00dev, CCK_PROT_CFG, reg);
-
- rt2800_register_read(rt2x00dev, OFDM_PROT_CFG, ®);
- rt2x00_set_field32(®, OFDM_PROT_CFG_RTS_TH_EN, enabled);
- rt2800_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
-
- rt2800_register_read(rt2x00dev, MM20_PROT_CFG, ®);
- rt2x00_set_field32(®, MM20_PROT_CFG_RTS_TH_EN, enabled);
- rt2800_register_write(rt2x00dev, MM20_PROT_CFG, reg);
-
- rt2800_register_read(rt2x00dev, MM40_PROT_CFG, ®);
- rt2x00_set_field32(®, MM40_PROT_CFG_RTS_TH_EN, enabled);
- rt2800_register_write(rt2x00dev, MM40_PROT_CFG, reg);
-
- rt2800_register_read(rt2x00dev, GF20_PROT_CFG, ®);
- rt2x00_set_field32(®, GF20_PROT_CFG_RTS_TH_EN, enabled);
- rt2800_register_write(rt2x00dev, GF20_PROT_CFG, reg);
-
- rt2800_register_read(rt2x00dev, GF40_PROT_CFG, ®);
- rt2x00_set_field32(®, GF40_PROT_CFG_RTS_TH_EN, enabled);
- rt2800_register_write(rt2x00dev, GF40_PROT_CFG, reg);
-
- return 0;
-}
-
-static int rt2800usb_conf_tx(struct ieee80211_hw *hw, u16 queue_idx,
- const struct ieee80211_tx_queue_params *params)
-{
- struct rt2x00_dev *rt2x00dev = hw->priv;
- struct data_queue *queue;
- struct rt2x00_field32 field;
- int retval;
- u32 reg;
- u32 offset;
-
- /*
- * First pass the configuration through rt2x00lib, that will
- * update the queue settings and validate the input. After that
- * we are free to update the registers based on the value
- * in the queue parameter.
- */
- retval = rt2x00mac_conf_tx(hw, queue_idx, params);
- if (retval)
- return retval;
-
- /*
- * We only need to perform additional register initialization
- * for WMM queues/
- */
- if (queue_idx >= 4)
- return 0;
-
- queue = rt2x00queue_get_queue(rt2x00dev, queue_idx);
-
- /* Update WMM TXOP register */
- offset = WMM_TXOP0_CFG + (sizeof(u32) * (!!(queue_idx & 2)));
- field.bit_offset = (queue_idx & 1) * 16;
- field.bit_mask = 0xffff << field.bit_offset;
-
- rt2800_register_read(rt2x00dev, offset, ®);
- rt2x00_set_field32(®, field, queue->txop);
- rt2800_register_write(rt2x00dev, offset, reg);
-
- /* Update WMM registers */
- field.bit_offset = queue_idx * 4;
- field.bit_mask = 0xf << field.bit_offset;
-
- rt2800_register_read(rt2x00dev, WMM_AIFSN_CFG, ®);
- rt2x00_set_field32(®, field, queue->aifs);
- rt2800_register_write(rt2x00dev, WMM_AIFSN_CFG, reg);
-
- rt2800_register_read(rt2x00dev, WMM_CWMIN_CFG, ®);
- rt2x00_set_field32(®, field, queue->cw_min);
- rt2800_register_write(rt2x00dev, WMM_CWMIN_CFG, reg);
-
- rt2800_register_read(rt2x00dev, WMM_CWMAX_CFG, ®);
- rt2x00_set_field32(®, field, queue->cw_max);
- rt2800_register_write(rt2x00dev, WMM_CWMAX_CFG, reg);
-
- /* Update EDCA registers */
- offset = EDCA_AC0_CFG + (sizeof(u32) * queue_idx);
-
- rt2800_register_read(rt2x00dev, offset, ®);
- rt2x00_set_field32(®, EDCA_AC0_CFG_TX_OP, queue->txop);
- rt2x00_set_field32(®, EDCA_AC0_CFG_AIFSN, queue->aifs);
- rt2x00_set_field32(®, EDCA_AC0_CFG_CWMIN, queue->cw_min);
- rt2x00_set_field32(®, EDCA_AC0_CFG_CWMAX, queue->cw_max);
- rt2800_register_write(rt2x00dev, offset, reg);
-
- return 0;
-}
-
-static u64 rt2800usb_get_tsf(struct ieee80211_hw *hw)
-{
- struct rt2x00_dev *rt2x00dev = hw->priv;
- u64 tsf;
- u32 reg;
-
- rt2800_register_read(rt2x00dev, TSF_TIMER_DW1, ®);
- tsf = (u64) rt2x00_get_field32(reg, TSF_TIMER_DW1_HIGH_WORD) << 32;
- rt2800_register_read(rt2x00dev, TSF_TIMER_DW0, ®);
- tsf |= rt2x00_get_field32(reg, TSF_TIMER_DW0_LOW_WORD);
-
- return tsf;
-}
-
-static const struct ieee80211_ops rt2800usb_mac80211_ops = {
- .tx = rt2x00mac_tx,
- .start = rt2x00mac_start,
- .stop = rt2x00mac_stop,
- .add_interface = rt2x00mac_add_interface,
- .remove_interface = rt2x00mac_remove_interface,
- .config = rt2x00mac_config,
- .configure_filter = rt2x00mac_configure_filter,
- .set_tim = rt2x00mac_set_tim,
- .set_key = rt2x00mac_set_key,
- .get_stats = rt2x00mac_get_stats,
- .get_tkip_seq = rt2800usb_get_tkip_seq,
- .set_rts_threshold = rt2800usb_set_rts_threshold,
- .bss_info_changed = rt2x00mac_bss_info_changed,
- .conf_tx = rt2800usb_conf_tx,
- .get_tx_stats = rt2x00mac_get_tx_stats,
- .get_tsf = rt2800usb_get_tsf,
- .rfkill_poll = rt2x00mac_rfkill_poll,
-};
-
static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = {
.probe_hw = rt2800usb_probe_hw,
.get_firmware_name = rt2800usb_get_firmware_name,
};
static const struct rt2x00_ops rt2800usb_ops = {
- .name = KBUILD_MODNAME,
- .max_sta_intf = 1,
- .max_ap_intf = 8,
- .eeprom_size = EEPROM_SIZE,
- .rf_size = RF_SIZE,
- .tx_queues = NUM_TX_QUEUES,
- .rx = &rt2800usb_queue_rx,
- .tx = &rt2800usb_queue_tx,
- .bcn = &rt2800usb_queue_bcn,
- .lib = &rt2800usb_rt2x00_ops,
- .hw = &rt2800usb_mac80211_ops,
+ .name = KBUILD_MODNAME,
+ .max_sta_intf = 1,
+ .max_ap_intf = 8,
+ .eeprom_size = EEPROM_SIZE,
+ .rf_size = RF_SIZE,
+ .tx_queues = NUM_TX_QUEUES,
+ .extra_tx_headroom = TXINFO_DESC_SIZE + TXWI_DESC_SIZE,
+ .rx = &rt2800usb_queue_rx,
+ .tx = &rt2800usb_queue_tx,
+ .bcn = &rt2800usb_queue_bcn,
+ .lib = &rt2800usb_rt2x00_ops,
+ .hw = &rt2800_mac80211_ops,
#ifdef CONFIG_RT2X00_LIB_DEBUGFS
- .debugfs = &rt2800_rt2x00debug,
+ .debugfs = &rt2800_rt2x00debug,
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
};
{ USB_DEVICE(0x0e0b, 0x9041), USB_DEVICE_DATA(&rt2800usb_ops) },
/* Amit */
{ USB_DEVICE(0x15c5, 0x0008), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* Askey */
+ { USB_DEVICE(0x1690, 0x0740), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x1690, 0x0744), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0930, 0x0a07), USB_DEVICE_DATA(&rt2800usb_ops) },
/* ASUS */
{ USB_DEVICE(0x0b05, 0x1731), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x0b05, 0x1732), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x0b05, 0x1742), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x0b05, 0x1760), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x0b05, 0x1761), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0b05, 0x1784), USB_DEVICE_DATA(&rt2800usb_ops) },
/* AzureWave */
{ USB_DEVICE(0x13d3, 0x3247), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x13d3, 0x3262), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x13d3, 0x3273), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x13d3, 0x3284), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x13d3, 0x3305), USB_DEVICE_DATA(&rt2800usb_ops) },
/* Belkin */
{ USB_DEVICE(0x050d, 0x8053), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x050d, 0x805c), USB_DEVICE_DATA(&rt2800usb_ops) },
/* Buffalo */
{ USB_DEVICE(0x0411, 0x00e8), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x0411, 0x012e), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* Cisco */
+ { USB_DEVICE(0x167b, 0x4001), USB_DEVICE_DATA(&rt2800usb_ops) },
/* Conceptronic */
{ USB_DEVICE(0x14b2, 0x3c06), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x14b2, 0x3c07), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x07aa, 0x002f), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x07aa, 0x003c), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x07aa, 0x003f), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x07aa, 0x0041), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x07aa, 0x0042), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x18c5, 0x0008), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x18c5, 0x0012), USB_DEVICE_DATA(&rt2800usb_ops) },
/* D-Link */
{ USB_DEVICE(0x07d1, 0x3c0f), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x07d1, 0x3c11), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x07d1, 0x3c13), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x07d1, 0x3c15), USB_DEVICE_DATA(&rt2800usb_ops) },
/* Edimax */
{ USB_DEVICE(0x7392, 0x7711), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x7392, 0x7717), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x7392, 0x7718), USB_DEVICE_DATA(&rt2800usb_ops) },
/* Encore */
{ USB_DEVICE(0x203d, 0x1480), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x203d, 0x14a1), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x203d, 0x14a9), USB_DEVICE_DATA(&rt2800usb_ops) },
/* EnGenius */
{ USB_DEVICE(0X1740, 0x9701), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x1740, 0x9702), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x1740, 0x9703), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x1740, 0x9705), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x1740, 0x9706), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x1740, 0x9707), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x1740, 0x9708), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x1740, 0x9709), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x1740, 0x9801), USB_DEVICE_DATA(&rt2800usb_ops) },
/* Gemtek */
{ USB_DEVICE(0x15a9, 0x0010), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x0e66, 0x0009), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x0e66, 0x000b), USB_DEVICE_DATA(&rt2800usb_ops) },
/* I-O DATA */
+ { USB_DEVICE(0x04bb, 0x0944), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x04bb, 0x0945), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x04bb, 0x0947), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x04bb, 0x0948), USB_DEVICE_DATA(&rt2800usb_ops) },
/* LevelOne */
{ USB_DEVICE(0x1740, 0x0605), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x1740, 0x0615), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x1737, 0x0070), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x1737, 0x0071), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x1737, 0x0077), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x1737, 0x0079), USB_DEVICE_DATA(&rt2800usb_ops) },
/* Logitec */
{ USB_DEVICE(0x0789, 0x0162), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x0789, 0x0163), USB_DEVICE_DATA(&rt2800usb_ops) },
/* Motorola */
{ USB_DEVICE(0x100d, 0x9031), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x100d, 0x9032), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* MSI */
+ { USB_DEVICE(0x0db0, 0x3820), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0db0, 0x3821), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0db0, 0x3870), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0db0, 0x6899), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0db0, 0x821a), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0db0, 0x870a), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0db0, 0x899a), USB_DEVICE_DATA(&rt2800usb_ops) },
/* Ovislink */
{ USB_DEVICE(0x1b75, 0x3072), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* Para */
+ { USB_DEVICE(0x20b8, 0x8888), USB_DEVICE_DATA(&rt2800usb_ops) },
/* Pegatron */
{ USB_DEVICE(0x1d4d, 0x0002), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x1d4d, 0x000c), USB_DEVICE_DATA(&rt2800usb_ops) },
/* Quanta */
{ USB_DEVICE(0x1a32, 0x0304), USB_DEVICE_DATA(&rt2800usb_ops) },
/* Ralink */
- { USB_DEVICE(0x0db0, 0x3820), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x0db0, 0x6899), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x148f, 0x2070), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x148f, 0x2770), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x148f, 0x2870), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x0df6, 0x003e), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x0df6, 0x003f), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x0df6, 0x0040), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0df6, 0x0041), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x0df6, 0x0042), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0df6, 0x0047), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0df6, 0x0048), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0df6, 0x004a), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0df6, 0x004d), USB_DEVICE_DATA(&rt2800usb_ops) },
/* SMC */
{ USB_DEVICE(0x083a, 0x6618), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x083a, 0x7511), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x083a, 0x8522), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x083a, 0xa512), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x083a, 0xa618), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x083a, 0xa701), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x083a, 0xa702), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x083a, 0xb522), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x083a, 0xc522), USB_DEVICE_DATA(&rt2800usb_ops) },
/* Sparklan */
{ USB_DEVICE(0x5a57, 0x0280), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x5a57, 0x0282), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x5a57, 0x0283), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x5a57, 0x0284), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x5a57, 0x5257), USB_DEVICE_DATA(&rt2800usb_ops) },
/* Zyxel */
{ USB_DEVICE(0x0586, 0x3416), USB_DEVICE_DATA(&rt2800usb_ops) },
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff