};
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
-#ifdef CONFIG_RT2500PCI_RFKILL
+#ifdef CONFIG_RT2X00_LIB_RFKILL
static int rt2500pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
{
u32 reg;
}
#else
#define rt2500pci_rfkill_poll NULL
-#endif /* CONFIG_RT2500PCI_RFKILL */
+#endif /* CONFIG_RT2X00_LIB_RFKILL */
-#ifdef CONFIG_RT2500PCI_LEDS
+#ifdef CONFIG_RT2X00_LIB_LEDS
static void rt2500pci_brightness_set(struct led_classdev *led_cdev,
enum led_brightness brightness)
{
led->led_dev.blink_set = rt2500pci_blink_set;
led->flags = LED_INITIALIZED;
}
-#endif /* CONFIG_RT2500PCI_LEDS */
+#endif /* CONFIG_RT2X00_LIB_LEDS */
/*
* Configuration handlers.
rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs);
rt2x00_set_field32(&word, TXD_W0_RETRY_MODE,
test_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags));
+ rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skb->len);
rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE);
rt2x00_desc_write(txd, 0, word);
}
/*
* TX data initialization
*/
+static void rt2500pci_write_beacon(struct queue_entry *entry)
+{
+ struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
+ struct queue_entry_priv_pci *entry_priv = entry->priv_data;
+ struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
+ u32 word;
+ u32 reg;
+
+ /*
+ * Disable beaconing while we are reloading the beacon data,
+ * otherwise we might be sending out invalid data.
+ */
+ rt2x00pci_register_read(rt2x00dev, CSR14, ®);
+ rt2x00_set_field32(®, CSR14_TSF_COUNT, 0);
+ rt2x00_set_field32(®, CSR14_TBCN, 0);
+ rt2x00_set_field32(®, CSR14_BEACON_GEN, 0);
+ rt2x00pci_register_write(rt2x00dev, CSR14, reg);
+
+ /*
+ * Replace rt2x00lib allocated descriptor with the
+ * pointer to the _real_ hardware descriptor.
+ * After that, map the beacon to DMA and update the
+ * descriptor.
+ */
+ memcpy(entry_priv->desc, skbdesc->desc, skbdesc->desc_len);
+ skbdesc->desc = entry_priv->desc;
+
+ rt2x00queue_map_txskb(rt2x00dev, entry->skb);
+
+ rt2x00_desc_read(entry_priv->desc, 1, &word);
+ rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, skbdesc->skb_dma);
+ rt2x00_desc_write(entry_priv->desc, 1, word);
+}
+
static void rt2500pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
const enum data_queue_qid queue)
{
if (rt2x00_get_field32(word0, RXD_W0_OFDM))
rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP;
+ else
+ rxdesc->dev_flags |= RXDONE_SIGNAL_BITRATE;
if (rt2x00_get_field32(word0, RXD_W0_MY_BSS))
rxdesc->dev_flags |= RXDONE_MY_BSS;
}
if (!reg)
return IRQ_NONE;
- if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
+ if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
return IRQ_HANDLED;
/*
*/
mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
if (!is_valid_ether_addr(mac)) {
- DECLARE_MAC_BUF(macbuf);
-
random_ether_addr(mac);
- EEPROM(rt2x00dev, "MAC: %s\n",
- print_mac(macbuf, mac));
+ EEPROM(rt2x00dev, "MAC: %pM\n", mac);
}
rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word);
/*
* Store led mode, for correct led behaviour.
*/
-#ifdef CONFIG_RT2500PCI_LEDS
+#ifdef CONFIG_RT2X00_LIB_LEDS
value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE);
rt2500pci_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
if (value == LED_MODE_TXRX_ACTIVITY)
rt2500pci_init_led(rt2x00dev, &rt2x00dev->led_qual,
LED_TYPE_ACTIVITY);
-#endif /* CONFIG_RT2500PCI_LEDS */
+#endif /* CONFIG_RT2X00_LIB_LEDS */
/*
* Detect if this device has an hardware controlled radio.
*/
-#ifdef CONFIG_RT2500PCI_RFKILL
+#ifdef CONFIG_RT2X00_LIB_RFKILL
if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
__set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
-#endif /* CONFIG_RT2500PCI_RFKILL */
+#endif /* CONFIG_RT2X00_LIB_RFKILL */
/*
* Check if the BBP tuning should be enabled.
{ 161, 0x00022020, 0x000090be, 0x00000101, 0x00000a07 },
};
-static void rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
+static int rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
{
struct hw_mode_spec *spec = &rt2x00dev->spec;
- u8 *txpower;
+ struct channel_info *info;
+ char *tx_power;
unsigned int i;
/*
EEPROM_MAC_ADDR_0));
/*
- * Convert tx_power array in eeprom.
- */
- txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
- for (i = 0; i < 14; i++)
- txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
-
- /*
* Initialize hw_mode information.
*/
spec->supported_bands = SUPPORT_BAND_2GHZ;
spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
- spec->tx_power_a = NULL;
- spec->tx_power_bg = txpower;
- spec->tx_power_default = DEFAULT_TXPOWER;
if (rt2x00_rf(&rt2x00dev->chip, RF2522)) {
spec->num_channels = ARRAY_SIZE(rf_vals_bg_2522);
spec->num_channels = ARRAY_SIZE(rf_vals_5222);
spec->channels = rf_vals_5222;
}
+
+ /*
+ * Create channel information array
+ */
+ info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ spec->channels_info = info;
+
+ tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
+ for (i = 0; i < 14; i++)
+ info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
+
+ if (spec->num_channels > 14) {
+ for (i = 14; i < spec->num_channels; i++)
+ info[i].tx_power1 = DEFAULT_TXPOWER;
+ }
+
+ return 0;
}
static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev)
/*
* Initialize hw specifications.
*/
- rt2500pci_probe_hw_mode(rt2x00dev);
+ retval = rt2500pci_probe_hw_mode(rt2x00dev);
+ if (retval)
+ return retval;
/*
* This device requires the atim queue and DMA-mapped skbs.
return tsf;
}
-static int rt2500pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb)
-{
- struct rt2x00_dev *rt2x00dev = hw->priv;
- struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
- struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif);
- struct queue_entry_priv_pci *entry_priv;
- struct skb_frame_desc *skbdesc;
- struct txentry_desc txdesc;
- u32 reg;
-
- if (unlikely(!intf->beacon))
- return -ENOBUFS;
-
- entry_priv = intf->beacon->priv_data;
-
- /*
- * Copy all TX descriptor information into txdesc,
- * after that we are free to use the skb->cb array
- * for our information.
- */
- intf->beacon->skb = skb;
- rt2x00queue_create_tx_descriptor(intf->beacon, &txdesc);
-
- /*
- * Fill in skb descriptor
- */
- skbdesc = get_skb_frame_desc(skb);
- memset(skbdesc, 0, sizeof(*skbdesc));
- skbdesc->desc = entry_priv->desc;
- skbdesc->desc_len = intf->beacon->queue->desc_size;
- skbdesc->entry = intf->beacon;
-
- /*
- * Disable beaconing while we are reloading the beacon data,
- * otherwise we might be sending out invalid data.
- */
- rt2x00pci_register_read(rt2x00dev, CSR14, ®);
- rt2x00_set_field32(®, CSR14_TSF_COUNT, 0);
- rt2x00_set_field32(®, CSR14_TBCN, 0);
- rt2x00_set_field32(®, CSR14_BEACON_GEN, 0);
- rt2x00pci_register_write(rt2x00dev, CSR14, reg);
-
- /*
- * Enable beacon generation.
- * Write entire beacon with descriptor to register,
- * and kick the beacon generator.
- */
- rt2x00queue_map_txskb(rt2x00dev, intf->beacon->skb);
- rt2x00queue_write_tx_descriptor(intf->beacon, &txdesc);
- rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, QID_BEACON);
-
- return 0;
-}
-
static int rt2500pci_tx_last_beacon(struct ieee80211_hw *hw)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
.conf_tx = rt2x00mac_conf_tx,
.get_tx_stats = rt2x00mac_get_tx_stats,
.get_tsf = rt2500pci_get_tsf,
- .beacon_update = rt2500pci_beacon_update,
.tx_last_beacon = rt2500pci_tx_last_beacon,
};
.link_tuner = rt2500pci_link_tuner,
.write_tx_desc = rt2500pci_write_tx_desc,
.write_tx_data = rt2x00pci_write_tx_data,
+ .write_beacon = rt2500pci_write_beacon,
.kick_tx_queue = rt2500pci_kick_tx_queue,
.fill_rxdone = rt2500pci_fill_rxdone,
.config_filter = rt2500pci_config_filter,
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff