-config RT2X00
+menuconfig RT2X00
tristate "Ralink driver support"
- depends on MAC80211 && WLAN_80211 && EXPERIMENTAL
+ depends on MAC80211 && WLAN_80211
---help---
- This will enable the experimental support for the Ralink drivers,
+ This will enable the support for the Ralink drivers,
developed in the rt2x00 project <http://rt2x00.serialmonkey.com>.
- These drivers will make use of the Devicescape ieee80211 stack.
+ These drivers make use of the mac80211 stack.
When building one of the individual drivers, the rt2x00 library
will also be created. That library (when the driver is built as
- a module) will be called "rt2x00lib.ko".
+ a module) will be called rt2x00lib.
-config RT2X00_LIB
- tristate
- depends on RT2X00
+ Additionally PCI and USB libraries will also be build depending
+ on the types of drivers being selected, these libraries will be
+ called rt2x00pci and rt2x00usb.
-config RT2X00_LIB_PCI
- tristate
- depends on RT2X00
- select RT2X00_LIB
-
-config RT2X00_LIB_USB
- tristate
- depends on RT2X00
- select RT2X00_LIB
-
-config RT2X00_LIB_FIRMWARE
- boolean
- depends on RT2X00_LIB
- select CRC_ITU_T
- select FW_LOADER
-
-config RT2X00_LIB_RFKILL
- boolean
- depends on RT2X00_LIB
- select RFKILL
- select INPUT_POLLDEV
+if RT2X00
config RT2400PCI
- tristate "Ralink rt2400 pci/pcmcia support"
- depends on RT2X00 && PCI
+ tristate "Ralink rt2400 (PCI/PCMCIA) support"
+ depends on PCI
select RT2X00_LIB_PCI
select EEPROM_93CX6
---help---
- This is an experimental driver for the Ralink rt2400 wireless chip.
+ This adds support for rt2400 wireless chipset family.
+ Supported chips: RT2460.
- When compiled as a module, this driver will be called "rt2400pci.ko".
-
-config RT2400PCI_RFKILL
- bool "RT2400 rfkill support"
- depends on RT2400PCI
- select RT2X00_LIB_RFKILL
- ---help---
- This adds support for integrated rt2400 devices that feature a
- hardware button to control the radio state.
- This feature depends on the RF switch subsystem rfkill.
+ When compiled as a module, this driver will be called rt2400pci.
config RT2500PCI
- tristate "Ralink rt2500 pci/pcmcia support"
- depends on RT2X00 && PCI
+ tristate "Ralink rt2500 (PCI/PCMCIA) support"
+ depends on PCI
select RT2X00_LIB_PCI
select EEPROM_93CX6
---help---
- This is an experimental driver for the Ralink rt2500 wireless chip.
+ This adds support for rt2500 wireless chipset family.
+ Supported chips: RT2560.
- When compiled as a module, this driver will be called "rt2500pci.ko".
-
-config RT2500PCI_RFKILL
- bool "RT2500 rfkill support"
- depends on RT2500PCI
- select RT2X00_LIB_RFKILL
- ---help---
- This adds support for integrated rt2500 devices that feature a
- hardware button to control the radio state.
- This feature depends on the RF switch subsystem rfkill.
+ When compiled as a module, this driver will be called rt2500pci.
config RT61PCI
- tristate "Ralink rt61 pci/pcmcia support"
- depends on RT2X00 && PCI
+ tristate "Ralink rt2501/rt61 (PCI/PCMCIA) support"
+ depends on PCI
select RT2X00_LIB_PCI
select RT2X00_LIB_FIRMWARE
+ select RT2X00_LIB_CRYPTO
+ select CRC_ITU_T
select EEPROM_93CX6
---help---
- This is an experimental driver for the Ralink rt61 wireless chip.
-
- When compiled as a module, this driver will be called "rt61pci.ko".
+ This adds support for rt2501 wireless chipset family.
+ Supported chips: RT2561, RT2561S & RT2661.
-config RT61PCI_RFKILL
- bool "RT61 rfkill support"
- depends on RT61PCI
- select RT2X00_LIB_RFKILL
- ---help---
- This adds support for integrated rt61 devices that feature a
- hardware button to control the radio state.
- This feature depends on the RF switch subsystem rfkill.
+ When compiled as a module, this driver will be called rt61pci.
config RT2500USB
- tristate "Ralink rt2500 usb support"
- depends on RT2X00 && USB
+ tristate "Ralink rt2500 (USB) support"
+ depends on USB
select RT2X00_LIB_USB
+ select RT2X00_LIB_CRYPTO
---help---
- This is an experimental driver for the Ralink rt2500 wireless chip.
+ This adds support for rt2500 wireless chipset family.
+ Supported chips: RT2571 & RT2572.
- When compiled as a module, this driver will be called "rt2500usb.ko".
+ When compiled as a module, this driver will be called rt2500usb.
config RT73USB
- tristate "Ralink rt73 usb support"
- depends on RT2X00 && USB
+ tristate "Ralink rt2501/rt73 (USB) support"
+ depends on USB
select RT2X00_LIB_USB
select RT2X00_LIB_FIRMWARE
+ select RT2X00_LIB_CRYPTO
+ select CRC_ITU_T
---help---
- This is an experimental driver for the Ralink rt73 wireless chip.
+ This adds support for rt2501 wireless chipset family.
+ Supported chips: RT2571W, RT2573 & RT2671.
+
+ When compiled as a module, this driver will be called rt73usb.
+
+config RT2800USB
+ tristate "Ralink rt2800 (USB) support"
+ depends on USB && EXPERIMENTAL
+ select RT2X00_LIB_USB
+ select RT2X00_LIB_HT
+ select RT2X00_LIB_FIRMWARE
+ select RT2X00_LIB_CRYPTO
+ select CRC_CCITT
+ ---help---
+ This adds experimental support for rt2800 wireless chipset family.
+ Supported chips: RT2770, RT2870 & RT3070.
+
+ When compiled as a module, this driver will be called "rt2800usb.ko".
+
+config RT2X00_LIB_PCI
+ tristate
+ select RT2X00_LIB
+
+config RT2X00_LIB_USB
+ tristate
+ select RT2X00_LIB
+
+config RT2X00_LIB
+ tristate
+
+config RT2X00_LIB_HT
+ boolean
+
+config RT2X00_LIB_FIRMWARE
+ boolean
+ select FW_LOADER
+
+config RT2X00_LIB_CRYPTO
+ boolean
+
+config RT2X00_LIB_LEDS
+ boolean
+ default y if (RT2X00_LIB=y && LEDS_CLASS=y) || (RT2X00_LIB=m && LEDS_CLASS!=n)
- When compiled as a module, this driver will be called "rt73usb.ko".
+comment "rt2x00 leds support disabled due to modularized LEDS_CLASS and built-in rt2x00"
+ depends on RT2X00_LIB=y && LEDS_CLASS=m
config RT2X00_LIB_DEBUGFS
bool "Ralink debugfs support"
---help---
Enable creation of debugfs files for the rt2x00 drivers.
These debugfs files support both reading and writing of the
- most important register types of the rt2x00 devices.
+ most important register types of the rt2x00 hardware.
config RT2X00_DEBUG
bool "Ralink debug output"
---help---
Enable debugging output for all rt2x00 modules
+endif