This will enable the experimental support for the Ralink drivers,
developed in the rt2x00 project <http://rt2x00.serialmonkey.com>.
- These drivers will make use of the Devicescape ieee80211 stack.
+ These drivers make use of the mac80211 stack.
When building one of the individual drivers, the rt2x00 library
will also be created. That library (when the driver is built as
a module) will be called "rt2x00lib.ko".
+ Additionally PCI and USB libraries will also be build depending
+ on the types of drivers being selected, these libraries will be
+ called "rt2x00pci.ko" and "rt2x00usb.ko".
+
if RT2X00
config RT2X00_LIB
config RT2X00_LIB_FIRMWARE
boolean
depends on RT2X00_LIB
- select CRC_CCITT
- select CRC_ITU_T
select FW_LOADER
config RT2X00_LIB_RFKILL
boolean
depends on RT2X00_LIB
select RFKILL
- select INPUT_POLLDEV
config RT2X00_LIB_LEDS
boolean
- depends on RT2X00_LIB
- select LEDS_CLASS
- select LEDS_TRIGGERS
- select MAC80211_LEDS
+ depends on RT2X00_LIB && NEW_LEDS
config RT2400PCI
- tristate "Ralink rt2400 pci/pcmcia support"
+ tristate "Ralink rt2400 (PCI/PCMCIA) support"
depends on PCI
select RT2X00_LIB_PCI
select EEPROM_93CX6
---help---
- This is an experimental driver for the Ralink rt2400 wireless chip.
+ This adds support for rt2400 wireless chipset family.
+ Supported chips: RT2460.
When compiled as a module, this driver will be called "rt2400pci.ko".
config RT2400PCI_RFKILL
- bool "RT2400 rfkill support"
+ bool "Ralink rt2400 rfkill support"
depends on RT2400PCI
select RT2X00_LIB_RFKILL
---help---
- This adds support for integrated rt2400 devices that feature a
+ This adds support for integrated rt2400 hardware that features a
hardware button to control the radio state.
This feature depends on the RF switch subsystem rfkill.
config RT2400PCI_LEDS
- bool "RT2400 leds support"
- depends on RT2400PCI
+ bool "Ralink rt2400 leds support"
+ depends on RT2400PCI && NEW_LEDS
+ select LEDS_CLASS
select RT2X00_LIB_LEDS
---help---
This adds support for led triggers provided my mac80211.
config RT2500PCI
- tristate "Ralink rt2500 pci/pcmcia support"
+ tristate "Ralink rt2500 (PCI/PCMCIA) support"
depends on PCI
select RT2X00_LIB_PCI
select EEPROM_93CX6
---help---
- This is an experimental driver for the Ralink rt2500 wireless chip.
+ This adds support for rt2500 wireless chipset family.
+ Supported chips: RT2560.
When compiled as a module, this driver will be called "rt2500pci.ko".
config RT2500PCI_RFKILL
- bool "RT2500 rfkill support"
+ bool "Ralink rt2500 rfkill support"
depends on RT2500PCI
select RT2X00_LIB_RFKILL
---help---
- This adds support for integrated rt2500 devices that feature a
+ This adds support for integrated rt2500 hardware that features a
hardware button to control the radio state.
This feature depends on the RF switch subsystem rfkill.
config RT2500PCI_LEDS
- bool "RT2500 leds support"
- depends on RT2500PCI
+ bool "Ralink rt2500 leds support"
+ depends on RT2500PCI && NEW_LEDS
+ select LEDS_CLASS
select RT2X00_LIB_LEDS
---help---
This adds support for led triggers provided my mac80211.
config RT61PCI
- tristate "Ralink rt61 pci/pcmcia support"
+ tristate "Ralink rt2501/rt61 (PCI/PCMCIA) support"
depends on PCI
select RT2X00_LIB_PCI
select RT2X00_LIB_FIRMWARE
+ select CRC_ITU_T
select EEPROM_93CX6
---help---
- This is an experimental driver for the Ralink rt61 wireless chip.
+ This adds support for rt2501 wireless chipset family.
+ Supported chips: RT2561, RT2561S & RT2661.
When compiled as a module, this driver will be called "rt61pci.ko".
config RT61PCI_RFKILL
- bool "RT61 rfkill support"
+ bool "Ralink rt2501/rt61 rfkill support"
depends on RT61PCI
select RT2X00_LIB_RFKILL
---help---
- This adds support for integrated rt61 devices that feature a
+ This adds support for integrated rt61 hardware that features a
hardware button to control the radio state.
This feature depends on the RF switch subsystem rfkill.
config RT61PCI_LEDS
- bool "RT61 leds support"
- depends on RT61PCI
+ bool "Ralink rt2501/rt61 leds support"
+ depends on RT61PCI && NEW_LEDS
+ select LEDS_CLASS
select RT2X00_LIB_LEDS
---help---
This adds support for led triggers provided my mac80211.
config RT2500USB
- tristate "Ralink rt2500 usb support"
+ tristate "Ralink rt2500 (USB) support"
depends on USB
select RT2X00_LIB_USB
---help---
- This is an experimental driver for the Ralink rt2500 wireless chip.
+ This adds support for rt2500 wireless chipset family.
+ Supported chips: RT2571 & RT2572.
When compiled as a module, this driver will be called "rt2500usb.ko".
config RT2500USB_LEDS
- bool "RT2500 leds support"
- depends on RT2500USB
+ bool "Ralink rt2500 leds support"
+ depends on RT2500USB && NEW_LEDS
+ select LEDS_CLASS
select RT2X00_LIB_LEDS
---help---
This adds support for led triggers provided my mac80211.
config RT73USB
- tristate "Ralink rt73 usb support"
+ tristate "Ralink rt2501/rt73 (USB) support"
depends on USB
select RT2X00_LIB_USB
select RT2X00_LIB_FIRMWARE
+ select CRC_ITU_T
---help---
- This is an experimental driver for the Ralink rt73 wireless chip.
+ This adds support for rt2501 wireless chipset family.
+ Supported chips: RT2571W, RT2573 & RT2671.
When compiled as a module, this driver will be called "rt73usb.ko".
config RT73USB_LEDS
- bool "RT73 leds support"
- depends on RT73USB
+ bool "Ralink rt2501/rt73 leds support"
+ depends on RT73USB && NEW_LEDS
+ select LEDS_CLASS
select RT2X00_LIB_LEDS
---help---
This adds support for led triggers provided my mac80211.
---help---
Enable creation of debugfs files for the rt2x00 drivers.
These debugfs files support both reading and writing of the
- most important register types of the rt2x00 devices.
+ most important register types of the rt2x00 hardware.
config RT2X00_DEBUG
bool "Ralink debug output"
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff